Search Results

Search found 18244 results on 730 pages for 'controller action'.

Page 404/730 | < Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >

• Debian Lenny - network interfaces(eth) are in DOWN state

  - by pachanga

  Folks, I'm facing a very weird problem with one of my production servers(it's Debian Lenny) - after reboot network interfaces(eth0,eth1) are in DOWN state. Looks like an Intel based networking adapter is installed on the server, lspci lists it as follows: Ethernet controller: Intel Corporation Device 10c9 (rev 01) The kernel driver responsible for this adapter is "igb". I tried "modprobe -r igb && modprobe igb", network interfaces first disappear then appear, but they are in DOWN state again. What could go wrong? It used to be working just fine. How can this be fixed?

  Read the article

• Firewall Authentication - logon failed

  - by RoseofPurple

  I am attempting to use a Watchguard firebox 550e with Fireware XTM 11 to authenticate incoming traffic for RDP access. I have configured the firewall to use my domain controller for Active directory authentication with a Windows 2000 server farm and added a couple of user accounts to the users list in the firewall, but when I attempt to log onto the authentication page for the firewall, I get Logon failed. I know that the user names work and that the passwords are correct. I am also certain that I have told it to log on using Active Directory instead of the FireboxDB. I have tried using the username alone, the domain\username, and the email address. I believe that the Search base is correct (DC=mydomainname,DC=com), and I did not change any defaults for sAMAccountName (and I do not recall making any changes to those items when configuring the domain structure). Any assistance would be appreciated.

  Read the article

• Flexible virtualization infrastructure Design with libvirt

  - by Lessfoe

  I'm going to install a CentOS6 Server with Virtualization ( libvirtd ) capabilities on a DELL Server with Hardware RAID5 of around 6T of disk space ( It has 4x2T disks in a PERC700 RAID Controller ). I'm going then to install some guests which requires few resources except one that needs 500GB of disk space, 8/16GB of RAM and good performances. I was thinking about file images for guests storage but I'm not sure about the 500GB VM what needs good performances so that an LVM device could be better. So my question is what would be the best layout concerning: RAID setup ( RAID5, RAID1 + 1 disk for OS only. ) disk partitioning ( using the entire disk/ leave free space for future use and extending it with LVM ) guests storage management ( LVM devices or file images ( considering the 500GB VM that is performance demanding ) or mixed ) Where to put guests storage? /var/lib/libvirt/images or maybe in a custom dir separated from system /home/VMs Thanks in advance for any hint.

  Read the article

• Can DPM 2007 back up Active Directory?

  - by rbeier

  We're installing Microsoft Data Protection Manager 2007 - we'll be using it to back up Exchange and SQL Server among other things. Does anyone know if DPM can also back up Active Directory? It sounds like the answer is "not really". You can install the DPM agent on a domain controller and make system state backups. But if your Active Directory is out of commission, there will be no way to restore the backups, since DPM depends on AD. Currently we're just using Windows Backup (ntbackup) to take system state backups on one of the DCs. Should we just continue with that? Thanks, Richard

  Read the article

• Log into another XP machine's SQL Server with a different userid? (WORKGROUP, not domain)

  - by Eric H.

  I have two machines at home, both XP Pro SP3. I have no domain controller, so they're both just in WORKGROUP. How can I, using Windows Authentication, log into an instance of SQL Server running on the other machine? Whenever I try it, it seems to try to login as 'Guest', even though I have entered the machine name (OTHER-DESKTOP), and login (OTHER-DESKTOP\otheruser) in the User Accounts Control Panel box. It works fine if I use sql server name and password, so I know the server is running. Any clues?

  Read the article

• SQL Server 2000 msdb database loading/suspect

  - by Blake Parcell

  My SQL Server recently suffered a raid controller/hard drive crash. After getting my hard drive problem corrected I soon found that some of my databases were (suspect) namely msdb. I am not a DBA by any means however am somewhat familiar with the daily SQL activities that happen on my server. So I restored from backup, and tried to bring my msdb database online. It is now forever stuck in (Loading\Suspect) and I am unable to script backups for my important databases. I can recreate all of the backup plans etc if i can somehow get a working msdb. Any help would be greatly appreciated. I am currently using: Microsoft SQL Server 2000 Version: 8.00.194

  Read the article

• Group Policy Task Schedule deployed to User Configuration not working, works when in Computer Configuration?

  - by user80130

  I added a Scheduled Task on my Windows 2008 R2 Domain Controller in the Group Policy Manager: MyDomain Policy User Configuration Preferences Control Panel Settings Scheduled Tasks Basic Task, like starting notepad, when user unlocks his workstation. This should show up in the client workstation's task scheduler, but it dosn't. No errors or anything like that. If I use the "Computer Configuration" instead of "User Configuration" the task appears, and I'm able to run the task. I've tried the gpupdate /force followed by gpresult and checked the report, but it dosn't contain the GPO Scheduled Tasks I created? (again, does show up when using "Computer Configuration".) The issue is that I have to run the application in the current users context, and only on a specific Employee OU, and thereby limit this task only to Employee Workstations and not apply the application when the same employee log on to internal servers and such. Primary domain dontroller is a Windows 2008 R2, workstations Windows 7 Enterprise. What am I doing wrong ?

  Read the article

• Can I put a laptop Core i7 CPU in a desktop?

  - by Weezy

  One of the most important thing to me for a CPU is a good mix between speed and heat. For example five years ago I bought a Core 2 Duo 6300 (max TDP 65W): I put a big heatsink on the CPU, no fans (I do hate moving parts and noise) and it worked like a charm and very silently for five years (and it still work but five years later I wouldn't mind a faster CPU and a faster memory controller and more memory). I consider a max TDP of 130W unacceptable (like some high-end Core i7 have), for several reasons. So I was wondering: can I build a desktop and put a Core i7 CPU meant to be used in laptop in it? For example I was thinking about the Core i7 740QM (max TDP 45W [!]). Are these compatible with desktop Core i7 motherboards? (for example on NewEgg it says that the "CPU socket type" for the Core i7 740QM is PGA988, I've not too sure about what this is)

  Read the article

• path problem with mod_rewrite, XDebug, PDT, XAMPP and Windows XP

  - by Delirium tremens

  My mod_rewrite turns accounts/create into index.php?folder=accounts&action=create, but pdt ignores it, so when I try to start a PHP Script debug session, I have to type a folder location in the file field and pdt doesn't accept. When PDT auto generates the URL for the PHP Web Page debug session, I go to http://localhost/myframe/index.php?XDEBUG%5FSESSION%5FSTART=ECLIPSE%5FDBGP&KEY=12569067976875, but myframe is in the frameworks folder, so I get a 404 error. When I check a breakpoint, uncheck Auto Generate, add frameworks before myframe in URL, set Start Debug from http://localhost/frameworks/myframe/accounts/create in Advanced and click Debug, the debugger doesn't stop at the breakpoint.

  Read the article

• Where to begin with IPv6 [closed]

  - by Willem de Vries

  I am fairly familiar with setting-up IPv4 networks for bigger server configurations, only now I wanted to start familiarizing myself with doing the same for IPv6. I have been Googling for the second night in a row for things like: IPv6 network design, IPv6 for dummies, etc. So far most things you find go on about why IPv6 and the amazing amount of numbers that we have now. Yet I am looking for practical stuff, for example: what would be a good way to assign IP-number, as I understand it DHCP shouldn't be the default course of action. How do other assignment methods work with DNS configuration? what would be a good or standard way of dividing the network in to sub-nets? (database, application, web servers spread over multiple domains/applications and some what intertwined) In short I would like to find good resources with practical information books, webpages, etc.

  Read the article

• iWork '09 Keynote: is there is straightforward way to 'dim' and 'highlight' each item in a bullet li

  - by doug

  I have a bullet list on a slide: first item second item third item What I want to do is show those three bulleted items in a sequence like this: first bullet appears first bullet dims second bullet appears second bullet dims third bullet appears third bullet dims In other words, only one bullet is shown at a time (the one i am current discussing) to reduce audience distraction by what comes next or what i just finished discussing (the prior bullet). This is such a common thing to do, there's got to be a simple, reliable way to do it. The only way I know of is to configure the items individually (using "Build In" and "Action" on each bullet item, which is not only slow but doesn't work well). Another way i've found--which, again is very slow--is to create my bullet list not by selecting a bullet list, but to build the list manually with text boxes (one bullet item per text box) then line them up as a list. This way it's easier to manipulate them independently--again though, takes way too long to do one slide this way.

  Read the article

• NetApp erroring with: STATUS_NOLOGON_WORKSTATION_TRUST_ACCOUNT

  - by Sobrique

  Since a sitewide upgrade to Windows 7 on desktop, I've started having a problem with virus checking. Specifically - when doing a rename operation on a (filer hosted) CIFS share. The virus checker seems to be triggering a set of messages on the filer: [filerB: auth.trace.authenticateUser.loginTraceIP:info]: AUTH: Login attempt by user server-wk8-r2$ of domain MYDOMAIN from client machine 10.1.1.20 (server-wk8-r2). [filerB: auth.dc.trace.DCConnection.statusMsg:info]: AUTH: TraceDC- attempting authentication with domain controller \\MYDC. [filerB: auth.trace.authenticateUser.loginRejected:info]: AUTH: Login attempt by user rejected by the domain controller with error 0xc0000199: STATUS_NOLOGON_WORKSTATION_TRUST_ACCOUNT. [filerB: auth.trace.authenticateUser.loginTraceMsg:info]: AUTH: Delaying the response by 5 seconds due to continuous failed login attempts by user server-wk8-r2$ of domain MYDOMAIN from client machine 10.1.1.20. This seems to specifically trigger on a rename so what we think is going on is the virus checker is seeing a 'new' file, and trying to do an on-access scan. The virus checker - previously running as LocalSystem and thus sending null as it's authentication request is now looking rather like a DOS attack, and causing the filer to temporarily black list. This 5s lock out each 'access attempt' is a minor nuisance most of the time, and really quite significant for some operations - e.g. large file transfers, where every file takes 5s Having done some digging, this seems to be related to NLTM authentication: Symptoms Error message: System error 1808 has occurred. The account used is a computer account. Use your global user account or local user account to access this server. A packet trace of the failure will show the error as: STATUS_NOLOGON_WORKSTATION_TRUST_ACCOUNT (0xC0000199) Cause Microsoft has changed the functionality of how a Local System account identifies itself during NTLM authentication. This only impacts NTLM authentication. It does not impact Kerberos Authentication. Solution On the host, please set the following group policy entry and reboot the host. Network Security: Allow Local System to use computer identity for NTLM: Disabled Defining this group policy makes Windows Server 2008 R2 and Windows 7 function like Windows Server 2008 SP1. So we've now got a couple of workaround which aren't particularly nice - one is to change this security option. One is to disable virus checking, or otherwise exempt part of the infrastructure. And here's where I come to my request for assistance from ServerFault - what is the best way forwards? I lack Windows experience to be sure of what I'm seeing. I'm not entirely sure why NTLM is part of this picture in the first place - I thought we were using Kerberos authentication. I'm not sure how to start diagnosing or troubleshooting this. (We are going cross domain - workstation machine accounts are in a separate AD and DNS domain to my filer. Normal user authentication works fine however.) And failing that, can anyone suggest other lines of enquiry? I'd like to avoid a site wide security option change, or if I do go that way I'll need to be able to supply detailed reasoning. Likewise - disabling virus checking works as a short term workaround, and applying exclusions may help... but I'd rather not, and don't think that solves the underlying problem. EDIT: Filers in AD ldap have SPNs for: nfs/host.fully.qualified.domain nfs/host HOST/host.fully.qualified.domain HOST/host (Sorry, have to obfuscate those). Could it be that without a 'cifs/host.fully.qualified.domain' it's not going to work? (or some other SPN? ) Edit: As part of the searching I've been doing I've found: http://itwanderer.wordpress.com/2011/04/14/tread-lightly-kerberos-encryption-types/ Which suggests that several encryption types were disabled by default in Win7/2008R2. This might be pertinent, as we've definitely had a similar problem with Keberized NFSv4. There is a hidden option which may help some future Keberos users: options nfs.rpcsec.trace on (This hasn't given me anything yet though, so may just be NFS specific). Edit: Further digging has me tracking it back to cross domain authentication. It looks like my Windows 7 workstation (in one domain) is not getting Kerberos tickets for the other domain, in which my NetApp filer is CIFS joined. I've done this separately against a standalone server (Win2003 and Win2008) and didn't get Kerberos tickets for those either. Which means I think Kerberos might be broken, but I've no idea how to troubleshoot further. Edit: A further update: It looks like this may be down Kerberos tickets not being issued cross domain. This then triggers NTLM fallback, which then runs into this problem (since Windows 7). First port of call will be to investigate the Kerberos side of things, but in neither case do we have anything pointing at the Filer being the root cause. As such - as the storage engineer - it's out of my hands. However, if anyone can point me in the direction of troubleshooting Kerberos spanning two Windows AD domains (Kerberos Realms) then that would be appreciated. Options we're going to be considering for resolution: Amend policy option on all workstations via GPO (as above). Talking to AV vendor about the rename triggering scanning. Talking to AV vendor regarding running AV as service account. investigating Kerberos authentication (why it's not working, whether it should be).

  Read the article

• apt-get install phpmyadmin on debian doesn't install /etc/phpmyadmin/apache.conf

  - by Christian Nikkanen

  I'm trying to install phpmyadmin on my webserver, using this guide: http://www.howtoforge.com/ubuntu_debian_lamp_server I did that once, and it worked like a dream, but I hated the looks of phpmyadmin (maybe the oldest layout ever) and decided to delete it, and didn't know that deleting is done with apt-get remove phpmyadmin and did in phpmyadmin directory rm * and thought that it's done. However, as I can't find the debian build of phpmyadmin anywhere, I want to install it again, but when I add Include /etc/phpmyadmin/apache.conf to /etc/apache2/apache2.conf, and restart apache, it give's me this error: apache2: Syntax error on line 73 of /etc/apache2/apache2.conf: Could not open configuration file /etc/phpmyadmin/apache.conf: No such file or directory Action 'configtest' failed. The Apache error log may have more information. failed! No matter how I try, I always get this error, and phpmyadmin isn't there.

  Read the article

• Creating Multiple Users on Single PHP-FPM Pool

  - by Vince Kronlein

  Have PHP-FPM/FastCGI up and running on my cPanel/WHM server but I'd like have it allow for multiple users off of a single pool. Getting all vhosts to run off a single pool is simple by adding this to the Apache include editor under Global Post Vhost: <IfModule mod_fastcgi.c> FastCGIExternalServer /usr/local/sbin/php-fpm -host 127.0.0.1:9000 AddHandler php-fastcgi .php Action php-fastcgi /usr/local/sbin/php-fpm.fcgi ScriptAlias /usr/local/spin/php-fpm.fcgi /usr/local/sbin/php-fpm <Directory /usr/local/sbin> Options ExecCGI FollowSymLinks SetHandler fastcgi-script Order allow,deny Allow from all </Directory> </IfModule> But I'd like to find a way to implement php running under the user, but sharing the pool. I manage and control all the domains that run under the pool so I'm not concerned about security of files per account, I just need to make sure all scripting can be executed by the user who owns the files, instead of needing to change file permissions for each account, or having to create tons of vhost include files.

  Read the article

• Find DNS server automatically

  - by jdickson

  I've got a Windows 2012 server set up as a domain controller and DNS server in my basement. On my laptop, if I set it to use the IP address of my server as the DNS server, then it works as expected. The problem with that is that I use my laptop outside my home network and I need to switch it back to automatic. Setup is like this: ISP Router running DD-WRT Win 2012 DC/DNS and other network computers How can I have my laptop find the DNS server automatically instead of using my ISP's DNS servers?

  Read the article

• Entering new user data into AD LDS

  - by Robert Koritnik

  I need some help configuring AD LDS (Active Directory Lightweight Directory Services). I'm not an administrator, have never configured domains and I don't have a clue how to add new users to existing domains. The thing is I need to develop an app on top of Sharepoint 2010 that must be connected to AD. I've chosen AD LDS because I can install it on Windows 7 and it acts as an active directory even though there's no domain controller present in the network. What I've done so far: I've installed AD LDS I've added a new instance with appication directory partition name DN=Air,DC=Watanabe,DC=pri I can connect to it using ADSI Edit and see all kinds of strange But now I don't know what to do? When it opens I can see the window below, but where's next? Can anybody give me some guidelines, how can I add domain users, so I can use them in my app AD required app?

  Read the article

• Exchange 2007: Auto reply message to senders (server side)

  - by Mestika

  I’ve a need to create an auto-reply for some of the users in my organization where, when a person sends an E-mail to e.g. [email protected] is faced with an automatically auto-reply with some message “closed during the holidays. We are back at… etc. etc. etc.”. I’ve tried to create a Transport Rule on our Exchange server but the only option I can find in the actions-window is to reply with a “Bounce message to sender with enhanced status code” but I guess that is not the precise action I’m looking for. How can I set up a server-side auto-reply, apply it to only a fixed number of users in my organization and create a message to the senders (which is outside the organization)?

  Read the article

• X locks up with konqueror on comics.com

  - by retracile

  If I browse to comics.com using konqueror under KDE on Fedora 11, X will, after a delay, lock up. The mouse will move, but no keyboard input is recognized, and the screen does not react to the mouse passing over objects on screen. I am able to ssh into the machine and issue shutdown -r now and have that work. The machine is a Dell XPS M1330 with Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c), and Fedora 11 is fully updated. Visiting the same site in Firefox does not cause a lockup. I am booting with nomodeset since it won't boot into X otherwise. I tried the other two accel options: EXA (still locks up) and XAA (X won't start). Any suggestions on how I can debug this? bugzilla

  Read the article

• Why won't the Office 2007 AutoCorrections feature install correctly?

  - by gilles27

  I've installed Office 2007 successfully but each time I use an application that requires spell checking (e.g. Word, Outlook) I begin typing and get the following message The list of common English (U.K.) AutoCorrections is not available. This feature is not currently installed. Would you like to install it now? If I click Yes, I get an error with the message The list of common English (U.K.) AutoCorrections is not available. Microsoft Office Outlook cannot install the necessary files due to Windows Installer error 1605. This action is only valid for products that are currently installed. Does anyone know what I can do to resolve this? A reinstall hasn't worked.

  Read the article

• ESXi 4 failed to find boot device

  - by phil

  I had exsi 3.5 running just fine, the upgrade to 4 failed ( i thought it would so everything is backed up ). but it did boot just could not import the data store So i did a fresh install of ESXi 4. Now it says failed to find boot device. Not sure why. i have wiped the disk, the controller is a adaptec 3405, it worked fine in 3.5 and when i upgrade to 4 it did boot. Now it just hangs at loading vfat. then the failed to find boot device. Any ideas?

  Read the article

• Editing tags in bunch of MP3 files?

  - by overtherainbow

  I have a bunch of files whose filename looks like "<Track> - <Title> - <Artist>.mp3". I'd like to rewrite their MP3 Title tag to be "<Track> - <Title>.mp3" so that each song is displayed correctly on my elcheapo MP3 player. Since I rarely edit MP3 files anyway, MP3 Tag Tools 1.2 Build 008 from 2003 was good enough, but I can't figure out how to do this with this application. I just tried MP3Tag 2.46, but couldn't figure out if it can do this (created a new Action, to no avail). I also tried TagScanner 5.1.558, without success. Does someone know of a good, free Windows application that can do this? Thank you.

  Read the article

• why would outlook not return a notification on trying to recall a message

  - by ooo

  i sent an email and then tried to recall the email. After hours post doing this, i didn't recieve any notification (success or failure of this action). when i click on the mail in my sent mail, it simply says: You attempted to recall this message on [xddf] . .. since i didn't receive notification if it was successful or not how do i know whats going on. Why would it take so long? should i assume the attempt to recall failed? Should i click on the email and try recalling again?

  Read the article

• Migrate AD DS Server 2003 to Server 2008 R2

  - by user2566483

  I would like to get a couple opinions Found this article online and wanted to know if it is good to follow http://www.msserverpro.com/migrating-active-directory-domain-controller-from-windows-server-2003-sp2-to-windows-server-2008-r2/ Couple of things that need to be done. 1. Move over all active directory settings from old Server 2003 server to new Server 2008R2 2. Setup all users on new server using csvde. csvde -f output.csv -- on old server csvde -i -f output.csv -- on new server Any advice would be greatly appreciated.

  Read the article

• How to reset Administrator password Windows Server 2003 installed on Vmware?

  - by Cucumber

  I want to reset administrator password on Windows Server 2003. OS installed on VMware server VMware Server version 2.0.1. And problem is this: when i try to boot from live cd, after boot disk with Windows not detected. I tried to use Windows Admin Hack - Linux Boot; Hirens.BootCD.10.4; ophcrack-xp-livecd-2.3.1.iso None of these programs did not see the hard drive! Any ideas? Thank! ADD: I want to reset LOCAL admin password, not domain. And this computer are not domain controller.

  Read the article

• Enable fastcgi on SSL Virtualhost

  - by ggstevens

  Debian 7.5 My VirtualHost for port 80 works fine with the ifmodule for fastcgi. However, it does not work with the VirtualHost for port 443. SSL/https:// was working fine until I added the following: <IfModule mod_fastcgi.c> AddHandler php5-fcgi .php Action php5-fcgi /php5-fcgi Alias /php5-fcgi /usr/lib/cgi-bin/php5-fcgi FastCgiExternalServer /usr/lib/cgi-bin/php5-fcgi -socket /var/run/php5-fpm.sock -pass-header Authorization </IfModule> When I try to restart Apache I get an error: Reloading web server config: apache2 failed! However, if I remove the FastCgiExternalServer line, it works.

  Read the article

< Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >