Search Results

Search found 13347 results on 534 pages for 'embedded device'.

Page 406/534 | < Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >

• Dual displays not working - NVidia - Ubuntu 12.4

  - by user75105

  Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.4 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

  Read the article

• Software Error Basics

  Software Error Basics Who Causes Errors?   Software errors are caused by: ·    End-users ·    Programmers ·    Computer Systems   What Causes Errors?   Software errors are caused by: ·    Programmer Mistakes and Assumptions ·    Invalid data ·    Unexpected User Interactions ·    Missing Resources o  Files o  Databases o  Network Connectivity ·    Poor network connection ·    Insufficient Permissions   Where Do Errors Occur?   Software errors can occur anywhere code is executed:   ·    Desktop PC ·    Laptop PC ·    Server ·    Tablet PC ·    Mobile Phone ·    Any Device that can execute software   When Do Errors Occur?   Software errors occur when source code is being compiled (Compile-Time) or executed (Run-Time).  

  Read the article

• Oracle Virtual Desktop Infrastructure

  - by Fat Bloke

  A lot of the recent blog entries here have been about Oracle VM VirtualBox, possibly the coolest personal desktop virtualization product known to man. Deploying VirtualBox on your PC or Mac lets you run many virtual desktops at the same time to one user, you. But did you know that VirtualBox can also power an Enterprise-scale virtual desktop deployment too, delivering many desktops to many users?  As part of another Oracle product, Oracle Virtual Desktop Infrastructure (VDI), VirtualBox can run your Windows, Linux or Solaris desktops on servers located in the datacenter. Oracle VDI orchestrates the whole deal by looking after : creating or cloning the virtual desktops from a master template; managing the lifecycle of the desktops (create, start, suspend, resume, stop, delete); assigning which users get which desktops;  delivering easy and fast access to these virtual desktops from almost any device, such as existing PCs or Macs, iPads, or specially designed Sun Ray client devices too; load balancing and session management of all of this.  Architecturally the solution looks something like this: This is an increasingly hot area of the IT landscape, so the Fat Bloke has decided to create a new blog category (VDI) and dedicate a few blog entries to look into this in a bit more detail over the next few weeks. Watch this space... - FB 

  Read the article

• Is it reasonable to null guard every single dereferenced pointer?

  - by evadeflow

  At a new job, I've been getting flagged in code reviews for code like this: PowerManager::PowerManager(IMsgSender* msgSender) : msgSender_(msgSender) { } void PowerManager::SignalShutdown() { msgSender_->sendMsg("shutdown()"); } I'm told that last method should read: void PowerManager::SignalShutdown() { if (msgSender_) { msgSender_->sendMsg("shutdown()"); } } i.e., I must put a NULL guard around the msgSender_ variable, even though it is a private data member. It's difficult for me to restrain myself from using expletives to describe how I feel about this piece of 'wisdom'. When I ask for an explanation, I get a litany of horror stories about how some junior programmer, some-year, got confused about how a class was supposed to work and accidentally deleted a member he shouldn't have (and set it to NULL afterwards, apparently), and things blew up in the field right after a product release, and we've "learned the hard way, trust us" that it's better to just NULL check everything. To me, this feels like cargo cult programming, plain and simple. A few well-meaning colleagues are earnestly trying to help me 'get it' and see how this will help me write more robust code, but... I can't help feeling like they're the ones who don't get it. Is it reasonable for a coding standard to require that every single pointer dereferenced in a function be checked for NULL first—even private data members? (Note: To give some context, we make a consumer electronics device, not an air traffic control system or some other 'failure-equals-people-die' product.) EDIT: In the above example, the msgSender_ collaborator isn't optional. If it's ever NULL, it indicates a bug. The only reason it is passed into the constructor is so PowerManager can be tested with a mock IMsgSender subclass.

  Read the article

• PARTNER News: Tips and Guidelines from Avago (formerly LSI)

  - by Zeynep Koch

  In this blog write-up we would like to focus our attention to one of our IHV partners, Avago (formerly LSI) . Avago and Oracle have been collaborating at many levels for many years.  At the lowest level, Avago and Oracle engineer solutions to inbox advanced features in our I/O device drivers.  We collaborate to test, verify and optimize these drivers in Oracle Linux with Unbreakable Enterprise Kernel. Both LSI Nytro and Sun F-Series PCIe flash devices are supported inbox in Oracle Linux with Unbreakable Enterprise Kernel. By collaborating early in the engineering design cycle we can find and resolve issues sooner and deliver to the end-customer a fully optimized platform for I/O efficiency and data protection.  Hear more about the partnership and benefits in this podcast  LSI and Oracle Partnership. Avago had also been working on technical whitepaper and video whiteboard to explain some of the optimizations you can achieve by using smart flash cache with Oracle Linux.  Technical Paper: Improve Database Performance Using Sun Flash Accelerator Card, Database Smart Flash Cache and Oracle Linux Video: Improving DB Performance with Database Smart Flash Cache If you want more information about the partnership and product benefits, you can visit the LSI Oracle alliance page. 

  Read the article

• How to fix GRUB on dualboot with Windows7 and Ubuntu?

  - by b_oliv

  I am a relatively recent user of Linux. I had several releases of Ubuntu installed on my laptop working in dual-boot and never had any issues. Recently, I installed openSUSE because I thought it would be necessary for an assignment at my university. It turns out it wasn't so I returned to Ubuntu and decided to burn the new .iso to a CD and install it. The problem is that during installation process I almost for sure messed up with the partitions and now, whenever I tried to load Windows 7, it will tells me that a required device is inaccessible. So, I reinstalled Ubuntu again and now all I get is that I am redirected to the GRUB menu without any warnings. I tried creating a Windows Recovery Disk but it gives me Unexpected I/O error. I suspect it is because it was downloaded from the Internet and maybe some files weren't there. I tried everything without success, so I decided to ask here, in the hope I can receive some help and also learn how to help others with it in the future. Here it is my boot info summary: http://paste.ubuntu.com/1344990/ Also, I might add, that on the boot-repair advanced options, the box repair Windows boot files is "locked", so I can't check it. EDIT: Apparentely, the box is locked, because, from what I understood after reading the boot-repair information, everything is fine with my windows boot-files... I still need some guidance though

  Read the article

• How to synchronize a whole Ubuntu?

  - by Avio

  I think that the time is ripe to have my whole Ubuntu synchronized just as my Dropbox folder is. Given that we are always talking about files and directories, what's the difference between my Documents folder and my /usr system directory? Almost none, except for their location. In fact, I think that there is just one big issue that prevents people to have their beloved installations mirrored wherever they go: symlinks. Dropbox, Google Drive, Ubuntu One, Sugarsync, Skydrive, none of these services support symlinking. This means that if I push a symlink in one of the synced folders, locally the symlink is kept as is, but remotely (in the cloud or on the other synced machines) the symlink is resolved to the actual file that was originally pointed to. This completely disrupts Linux installations, thus these services can't be used for this purpose. So the question is. Does anybody knows a way to achieve this? A whole Ubuntu, always synchronized with a remote running copy, but still locally stored on both disks? My best guess is that I could use NFS. But the main difference between Dropbox and NFS is that NFS is a remote filesystem that always forces to remotely access the files, while Dropbox pushes modifcations to local filesystems (and thus would perform better). I've also heard about NFS caching. Does anybody knows if this solution could approximate Dropbox in this sense? P.s. I know that /boot, /dev, /proc, /run, /tmp and device-specific mountpoints in /mnt and /media will have to be left out the sync mechanism. What I'm interested in is the principle. Can this be done with reasonable performance, having reasonable resources (e.g. ~ 1Mbps upload bandwidth and a public IP address)?

  Read the article

• Which hard disk drive is which?

  - by djeikyb

  I want to know which hard disk drive corresponds to which device path. It's trivial to match the hard disk stats (brand, size) with the dev path, but I want more. I want to know which drive is which inside my case. What's a good way to go about getting this info? Rules: I am a lazy bum. I don't want to tear apart my server to remove all the drives, then add back one by one. A reboot is acceptable. The drives are inconveniently scrunched together in the case. All label information is hidden. The case can be opened. Most disks are SATA, so theoretically hot swappable. Unplugging cables is fair game. Bonus: For a cli only solution. I'll award answer to the best/easiest gui or cli answer, and give a bounty to the next-best answer of the other kind. Or maybe the other way around, because the bounty is worth more points.

  Read the article

• Unreal Torunament (UT99) no sound in 12.04?

  - by Talas

  I've been trying to get sound working in Unreal Torunament for a couple of days now. I'm using the native Unreal Tournament version, not wine or something like that. I have sound in all other games and media applications that I have tried. In older ubuntu versions it worked fine. I'm now using kubuntu 12.04, I have all the alsa-oss and oss-compat packages installed. I have followed most of the advice out there, and it all seems to fall on padsp and aoss. My problem, however, is that even when trying to use padsp or aoss, I can't get any sound at all. (Note UT has two output modes: ALAudio and Generic(OSS), I have tried both). Is there some configuration required to use padsp or aoss correctly? I have ran it like padsp ./ut and aoss ./ut If using the AL backend in UT I get (both aoss and padsp give this): Bound to ALAudio.so open /dev/dsp: Invalid argument Audio initialization failed. If using the OSS backend in UT I get (both aoss and padsp give this): Bound to Audio.so Failed to open audio device. Audio initialization failed. Note that so far, I have gotten absolutely no sound. Thanks for any help!

  Read the article

• Scaling sprite velocity / co-ordinatesin Android

  - by user22241

  I'm trying to find the answer to a question that I've had for a long time, but am having trouble finding it! I hope someone can help :-) I'm trying to find information on how to scale sprite velocity / movement / co-ordinates. What I mean by this is how do I get a sprite to move at the same speed relative to the screen size / DPI so that it takes the same amount of real-time to get from one side of the screen to the other? All of the posts pertaining to sprite scaling that I can find on the various forums relate to the size of the sprite, but this part of it I'm OK with so far, it's just that when I move a sprite, it kind of gets there at different speed depending on the dpi / resolution of the device. I hope I'm making sense. This is the code I have so far, instead of using explicit amounts, like 1, I'm using something like the following: platSpeedFloat= (1 * (dpi/160)); //Use '1' so on an MDPI screen, the sprite will move by 1 physical pixel Then basically what I'm doing is something like this: (all varialble previously declared) platSpeedSave+=platSpeedFloat; //Add the platSpeedFloat value to the current platSpeedSave value platSpeed=(int) platSpeedSave; //Cast to int so it can be checked in the following statement if (platSpeed==platSpeedSave) //Check the casted int value to float value stored previoiusly {floorY=floorY-platSpeed; //If they match then change the Y value platSpeedSave=0;} //Reset Would be grateful if someone could assists - hope I'm making sense. The above doesn't seems to work the sprite moves 'faster' on lower DPI screens. Thanks

  Read the article

• My new hard drive won't automount on boot

  - by user518

  I installed a new hard drive right before installing the new Ubuntu 11.10 by reformatting, not upgrading. I was able to mount my drive, and partition it. It's a 1TB, and I was able to transfer all of my music, and videos to it. For some reason, it won't mount on boot, and I can't figure out how to manually mount it afterwards either. Here's my current /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=e0fbdf09-f9a0-4336-bac3-ba4dc6cfbcc0 / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda5 during installation UUID=adf15180-c84c-4309-bc9f-085fd7464f89 none swap sw 0 0 /dev/sdc1 /media/sdc1 ext4 defaults 0 0 The last line is what I added for my hard drive. Here's the output from sudo lshw -C disk: % sudo lshw -C disk ~ *-disk:0 description: ATA Disk product: ST3250310AS vendor: Seagate physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 3.AD serial: 6RYBF2QE size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000da204 *-cdrom description: DVD-RAM writer product: DVD+-RW DH-16A6S vendor: PLDS physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 version: YD11 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc

  Read the article

• Ubuntu 13.04 Sound Problem after following weird commands

  - by user206356

  After launching a few commands : echo autospawn = no >> ~/.config/pulse/client.conf #use ~/.pulse/client.conf on Ubuntu <= 12.10 killall pulseaudio $LANG=C pulseaudio -vvvv --log-time=1 > ~/pulseverbose.log 2>&1 My sound does not work. (just with the speakers, with headphones it works but I can not change the volume) The sound icon on the top right corner does show a speaker with a single non continuous line. I can not change the volume; it is frozen. There can be an extremely low output of the sound (I hear something but I am not sure...) It does not show a single output device that is avalaible, not even the "dummie". I have tried to reset pulseaudio, alsa, remove it, purging it, reinstalling it, without having success. EDIT: I have tried launching pulseaudio via the terminal. It worked :D However, I am very surprised why it does not automatically start at the start of the computer. Any ideas ? Here the console output : W: [pulseaudio] authkey.c: Failed to open cookie file '/home/simonm/.config/pulse/cookie': No such file or directory W: [pulseaudio] authkey.c: Failed to load authorization key '/home/simonm/.config/pulse/cookie': No such file or directory W: [pulseaudio] authkey.c: Failed to open cookie file '/home/simonm/.pulse-cookie': No such file or directory W: [pulseaudio] authkey.c: Failed to load authorization key '/home/simonm/.pulse-cookie': No such file or directory

  Read the article

• Mobile web app, styling in percentages; I can't get height to work [migrated]

  - by Mick79

  I am building a mobile app for a band and obviously want it to display well in all the plethora of handsets out there today. I built it at first for my own device and it looks and works great, so now I am reworking it in percentages so that it works in all devices. I have a slider (jquerytools) going on and if i set width to 100% then it is perfectly wide in my iphone and my ipad... success, however I am not having any luck with height. It seems to only accept a height in px. If i set a height in percent it just doesn't display. any ideas? #header{ width:100%; height:198px; position:relative; z-index: 20; box-shadow: 0 0 10px white; } .scrollable { /* required settings */ position:relative; overflow:hidden; width: 100%; height:100%; box-shadow: 0 0 20px purple; z-index: 20; } .scrollable .items { /* this cannot be too large */ width:500%; height:100%; position:absolute; clear:both; box-shadow: 0 0 30px green; } .items div { float:left; width:20%; height:100%; } /* single scrollable item */ .scrollable img { float:left; width:100%; height:100%; /* height:198px; */ } /* active item */ .scrollable .active { border:2px solid #000; position:relative; cursor:default; } `

  Read the article

• Ubuntu 12.04 startup is slow and dmesg output seems to lose several seconds

  - by cdowen

  I use ubuntu on Dell Inspiron n4050.I have upgraded to ubuntu 12.04 from 10.04. But now I find the system startup is a little slow and plymouth only show purple screen without logo during startup. When I use dmesg, it shows such messages: [ 2.497750] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.603028] usb 2-1.6: new high-speed USB device number 3 using ehci_hcd [ 2.715538] Initializing USB Mass Storage driver... [ 2.715594] usbcore: registered new interface driver usb-storage [ 2.715596] USB Mass Storage support registered. [ 21.317843] Adding 2000892k swap on /dev/sda5. Priority:-1 extents:1 across:2000892k [ 21.323724] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.391450] udevd[431]: starting version 175 I wonder what it is doing between 2 second and 21 second. Is it related to being so slow? I tried bootchart. It gave me a complex picture. Sorry I can't post it here. http://3.bp.blogspot.com/-7LX8T5uQvlw/UKhdFMVkp4I/AAAAAAAAADg/dtxePkE94mg/s320/lengzhen-ubuntu-precise-20121118-1.png While ubuntu is booting , I also noticed that it appears:/tmp is not ready or present And sometimes follows *Stop saving kernel messages. Is this the reason dmesg lost output?

  Read the article

• cannot log in to all account except guest after mounting new partition

  - by student

  I really really need help. to do my homework from school, since two days ago, I was installing oracle 11g on my ubuntu. through that process, there was lots of problems also, but searching a lot, in somehow I could go to the next phase installing it. (because it was the first time to install on ubuntu by myself..) but when I was making password for oracle and clicked next, it says there are not enough space for home/oracle folder, So to make another space, I mounted another space after checking Gparted and using Software device management, I mounted it. And when I rebooted it, since then, I cannot log in to my own administrator account and even to oracle account(that I made for oracle 11g on ubuntu ) when I type the passwords for it, it seems to work but it redisplay the first page to log in, without really logging in it.. So I loggined to here as guest account... and even I cannot try gnome console manipulation to restore or fix it.. because it is guest account... I`m struggling for three days and... help me, how do I need to do? and at the time oracle said it needs enough space for its home folder, how I should have done?

  Read the article

• Partitions mixing up

  - by anon

  I am trying to install ubuntu alongside my windows 7. The problem is that ubuntu is not detecting all of my partitions and basically clubs together many of them. The same thing is done by using GParted. However this problem does not arise while I am using Windows - 7. I cant paste the image of GParted since I dont have the required reputation... I think this could be due to stray GPT data but am not sure how to take care of it. Can someone help me figure this out ? The output of fdisk -l is as follows Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x20000000 Device Boot Start End Blocks Id System /dev/sda1 63 2047 992+ 42 SFS /dev/sda2 * 2048 206847 102400 42 SFS /dev/sda3 206848 146802687 73297920 42 SFS /dev/sda4 146802688 625140399 239168856 42 SFS However actually I have 4 partitions along with 25 gb unallocated space that I had thought to use for Ubuntu installation.

  Read the article

• Reason why Windows can't be installed on Ubuntu , Any Help though?

  - by Terzuz

  Well I got my Windows Vista .iso file , I put it on my USB Drive , Extracted , Then I restarted and went to "Boot Device Options" Clicked "Generic USB" (What I labeled when I formatted) Then it stood on a black screen for 15 minutes , Then just went to Ubuntu , Now I found out exactly what happened Why Windows WONT work on Ubuntu is a simple reason Not if you save it in NFTS Format or MSDOS (Both Windows Formats) , Not if you use anything special , This even applies to the Ubuntu downloader , One specific reason that I just noticed , Since WINE (Windows Application Loader) can't run while you click the USB , You can't open the Setup.exe file needed to install the Operating System , That means you can not install it at all if it is a .exe installer file , Then what can we do? Only other way is to make a partition with GParted , Put a partition , then install WINE , Then run your Windows Setup.exe file , Then Wine will load it up! Why not to open Setup.exe before you make a partition - Simple , It WONT WORK! I have tried , It says you need __ Amount of space and can be put on any partition , Yeah , Any partition NOT BEING USED Here is where I need your help! - I want to make a partition but they all show as locked when I open GParted , So How am I supposed to open them up? Get a hammer and tell HP my laptop didn't want to open its partitions? Nope , I need some help on how to unlock the partitions or what to do , Thank you in advance PS- If I could , I would put a bounty to this but I do not have enough reputation!

  Read the article

• 13.04 Temp Save, rt3290, Kernel downgrade

  - by user170534

  It's kind of a multiplying but I didn't wanted to open more than one topics. I'd have a fresh install of Ubuntu with tlp configured and using acpi_call to keep 7670M turned off. I was a short time arch user and with openbox and firefox it was about 60 to 70 degrees; wanted to turn to a stable release just for this reason. acpitz-virtual-0 Adapter: Virtual device temp1: +50.0°C radeon-pci-0100 Adapter: PCI adapter temp1: -128.0°C coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +56.0°C (high = +87.0°C, crit = +105.0°C) Core 0: +54.0°C (high = +87.0°C, crit = +105.0°C) Core 1: +55.0°C (high = +87.0°C, crit = +105.0°C) The temperature is not seriously high yet can be lower. Another issue is my wifi card, rt3290: The rt2800pci module is fine and all that but the download performance is pretty bad alongside of annoying signal range and the prop. driver gives a conf error about some specific rt2860 code and integrales in pci_dev file. If I blank off the error making variables, module loads but the driver is unused. Since the driver is old, I was thinking of downgrading the kernel of raring to 3.7 or may be 3.6. Should &-or can I?

  Read the article

• How do I force the system to look for new sound devices?

  - by John Zeringue

  I have a small flat screen TV (Toshiba) that I often connect via HDMI to my laptop (an HP Pavilion dv4) and use as a computer monitor. When I do this, I prefer to use the TV's speakers, particularly when I'm watching video, because the sound quality is much better. However, when I connect the HDMI cable after turning on my computer (rather than having it plugged in before booting up), Sound Settings does not list the TV as an output device, and I am forced to reboot. I was curious if there is an easier solution to this, perhaps a CLI command to check for new sound outputs. Does anyone know of something like this or have another solution? To clarify, I believe this is a software problem. The HDMI always works, and I can switch my desktop over to the TV at any time. The issue is that, if the HDMI wasn't connected during start up, the TV will not appear as an output option in the Sound Settings GUI. So, unless I'm mistaken, my question is not HDMI specific, but rather a general usage question about manipulating sound settings from the command line.

  Read the article

• One of my VMs went boom using Virtual Box and how it got fixed

  - by Enrique Lima

  I am running an HP Envy 15, 16GB and 500GB (7200 RPM) Hard drive. Had a VM configured from another environment, created the virtual machine config file on Virtual Box, everything seemed ok. Fired it up, and it was  s   l   o   w, it took close to 10 minutes for it to load, and about 5 more to see Windows was in the process of loading before the BSOD.  Thought, maybe, just maybe it will not happen again … oh was I wrong. Frustration had already hit an all time high with this configuration and the number of issues I’ve had. How I did the troubleshooting … The best thing to do (IMO) is to step back, and gather your tools to debug this situation. Tools:  Virtual Box command line tools, Windows Debug. Virtual Box comes with a pretty good set of tools to examine, migrate and overall tasks to deal with VMs. The firs step:  use VBoxManage to prevent the VM from rebooting after the error to get enough time to really dig into the BSOD issue. Command used:   VBoxManage setextradata VMNAME "VBoxInternal/PDM/HaltOnReset" 1 Once this was done, the error reported was an “Inaccessible boot device” coming from a “Stop – 7B” type of error on the BSOD. The issue I had with this, my VM was configured to use a virtual SATA controller, and thought Windows 2008 R2 would handle this fine … again wrong!  Because the integration tools from the other product where wanting to take effect that was throwing everything off. The fix The fix was almost handed to me, edited the configuration for the VM, removed the SATA controller from it, added the virtual hard drive under an IDE controller, boot up and voilà … it works! I was then able to install the Virtual Box guest tools and such, but have decided to favor “keep on working” over “let’s try SATA again”

  Read the article

• external usb hard drive is not being seen anymore

  - by incrediblehulk

  I think my problem is a little different than several other similar titled questions. Everything started while I was using 10.10. External drive was always recognized and mounted, but the timing of this differed. I mean when I booted, the OS sometimes saw the drive immediately, sometimes after a few minutes, sometimes after hours. Although this was annoying, I tolerated this somehow. Then this problem persisted after I upgraded to 11.04 with a clean install. Afterwards, the drive became totally invisible to the OS. It is not even detected as an usb device anymore. However, there is one thing I can do to make it seen. If I boot to another operating system which can detect the drive, and then boot back to ubuntu, everything is perfect. but this is of course very impractical. To summarize, the usb drive is recognized by ubuntu if and only if another OS in the same computer could recognize it first. I should also say I have not had any problems with the same drive in any other OS or a different computer. My drive is philips with a hitachi hdd inside, has its own power source and any other usb powered drives have never caused this kind of a problem. I've tried almost all recommendations in similar topics but none of them seems to be related to this one. What can I possibly do to fix this?

  Read the article

• How do I get 12.04 to recognize swap partition so that I can hibernate?

  - by Kayla

  I justed installed 12.04 and used gparted to erase and enlarge my swap partition. When I rebooted, gparted said that the file partition for the swap was unknown. Gparted doesn't let me change the file partition to "linux-swap". It does let me change it to NTFS, but when I reboot, it goes back to "unknown". Thanks in advance for your help. Output from sudo swapon -s: Filename Type Size Used Priority /dev/mapper/cryptswap1 partition 9025532 0 -1 Output from sudo fdisk -l: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9d63ac84 Device Boot Start End Blocks Id System /dev/sda1 * 2048 2459647 1228800 7 HPFS/NTFS/exFAT /dev/sda2 2459648 197836472 97688412+ 7 HPFS/NTFS/exFAT /dev/sda3 466890752 488395119 10752184 7 HPFS/NTFS/exFAT /dev/sda4 197836798 466890751 134526977 5 Extended /dev/sda5 197836800 448837631 125500416 83 Linux /dev/sda6 448839680 466890751 9025536 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/mapper/cryptswap1: 9242 MB, 9242148864 bytes 255 heads, 63 sectors/track, 1123 cylinders, total 18051072 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x951b7f53 Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table

  Read the article

• Boot failure on Ubuntu 11.04

  - by B Seven

  I was using my laptop with Ubuntu without problem for a few months. I did not update any software or install any OS updates. This morning when it started, I got error: no such device:.... error: no such disk error: you need to load the kernel first. Press any key to continue... Then takes me back to GRUB menu. Both Ubuntu option and recovery mode option show the same thing (above). What does this mean? How do I fix it? Since I did not install anything new, does it mean the SSD is dying (again)? How to check the SSD to and fix any file system errors? Ubuntu 11.04 EDIT: Just remembered something: when the system was shutting down, it did not turn off. There were a bunch of weird output statements, and I assumed the system had shut down so I turned it off with the power button. Perhaps something got corrupted because of that.

  Read the article

• No wubildr, No spaceleft, Boot Error and A previous installation was detected in D:\ubuntu. Please uninstall that before continuing

  - by tdc2bdc

  At first I was downloading Ubuntu 12.10 using Windows Installer, but I cancelled it after just 2-3 minutes and dowloaded 32-Bit ISO (ubuntu-12.10-desktop-i386). Then I created bootable USB Stick (new HP 210 v210 w) using Pendrivelinux (Universal-USB-Installer-1.9.1.4). I Formatted D Drive. (Both by Windows & EaseUS) I've set boot priority correctly. But after getting message "Boot Error", I ran wubi.exe directly from USB drive. Now the message is "A previous installation was detected in D:\ubuntu. Please uninstall that before continuing." I formatted D: again and performed disk check, surface test using EaseUS. It shows no error or bad sectors. Formatted & checked my pendrive too. Directly ran .iso. But same error keeps coming. I found way around above problems, by copying extracted .iso on D:\ and installing Ubuntu using wubi.exe and though on boot it was shown with Windows 7, selecting it caused following error Try hd(0,0): NTFS5 : No wubildr Try hd(0,1): NTFS5 : So, I uninstalled it and Reeinstalled it Now installation fails at around 7mins saying " An error occurred. No space left on device. For more info please see log file " My D: is a 9 GB partition. (99% Free) Ubuntu Site 12.10 says it needs around 4.5 GB. Now Trying it by extendin D: to 10 GB... Got No wubildr. Please help. tdc2bdc

  Read the article

• Three Ubuntu 12.04 + Xfce problems

  - by user1708495

  sorry to bother you, but I wanted to set up a minimal Ubuntu 12.04 with minimal Xfce and probably due to my unawareness of several important things, not everything is working properly. -Sometimes when I shutdown I get error message from iwlwifi: It starts with a time out error about sending a power table and after several other errors it says "On demand firmware reload and "Unable to initialize device". And the shutdown stops there so I can only use hard shutdown. -Also when I boot, I often boot to a black screen, but pressing ctrl+alt+f1 gets me to the login prompt (I do not use a login manager). But then I sometimes cannot type. Seems probably more like a X server problem. When it works I only see the Plymouth splash for a very short time or sometimes not at all. -And the last problem is the most annoying one: Frequently Xfce freezes completely. I think ctrl+alt+f1 works sometimes, but other times I also have to use hard shutdown. When it freezes the cpu fan gets louder. I've been using Xbuntu for a while before, but with "real" Linux I am more a beginner, so I hope you forgive my questions Thanks

  Read the article

< Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >