Search Results

Search found 12222 results on 489 pages for 'initial context'.

Page 406/489 | < Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >

• To what extent should code try to explain fatal exceptions?

  - by Andrzej Doyle

  I suspect that all non-trivial software is likely to experience situations where it hits an external problem it cannot work around and thus needs to fail. This might be due to bad configuration, an external server being down, disk full, etc. In these situations, especially if the software is running in non-interactive mode, I expect that all one can really do is log an error and wait for the admin to read the logs and fix the problem. If someone happens to interact with the software in the meantime, e.g. a request comes in to a server that failed to initialize properly, then perhaps an appropriate hint can be given to check the logs and maybe even the error can be echoed (depending on whether you can tell if they're a technical guy as opposed to a business user). For the moment though let's not think too hard about this part. My question is, to what extent should the software be responsible for trying to explain the meaning of the fatal error? In general, how much competence/knowledge are you allowed to presume on administrators of the software, and how much should you include troubleshooting information and potential resolution steps when logging fatal errors? Of course if there's something that's unique to the runtime context this should definitely be logged; but lets assume your software needs to talk to Active Directory via LDAP and gets back an error "[LDAP: error code 49 - 80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error, data 525, vece]". Is it reasonable to assume that the maintainers will be able to Google the error code and work out what it means, or should the software try to parse the error code and log that this is caused by an incorrect user DN in the LDAP config? I don't know if there is a definitive best-practices answer for this, so I'm keen to hear a variety of views.

  Read the article

• Accessing Web.config directly in ASP.NET MVC 1

  - by Neil T.

  I'm trying to implement integration testing in my ASP.NET MVC 1.0 solution. The technologies in use are LINQ-to-SQL, NUnit and WatiN. I recently discovered a pattern that will allow me to create a testing version of the database on the fly without modifying the development version of the database. I needed this behavior in order to run my user interface tests in WatiN that may modify the database. The plan is to modify the connection string in the Web.config file, and pass that new connection string to the DataContext constructor. This way, I don't have to add routes or modify my URLs in order to perform the integration testing. I've set up the project so that the test setup can modify the connection string to point to the test database when the tests are running. The connection string is stored in web.config. The problem I'm having is that when I try to run the tests, I get a NullReferenceException when trying to access the HTTPContext. From everything that I have read so far, the HTTPContext is only available within the context of a controller. Here is the code for the property that is supposed to give me the reference to the Web.config file: private System.Configuration.Configuration WebConfig { get { ExeConfigurationFileMap fileMap = new ExeConfigurationFileMap(); // NullReferenceException occurs on this line. fileMap.ExeConfigFilename = HttpContext.Current.Server.MapPath("~\\web.config"); System.Configuration.Configuration config = ConfigurationManager.OpenMappedExeConfiguration(fileMap, ConfigurationUserLevel.None); return config; } } Is there something that I am missing in order to make this work? Is there a better way to accomplish what I'm trying to achieve?

  Read the article

• Weird onclick behavior of images on home screen widget

  - by kknight

  I wrote a home screen widget with one image on it. When the image is clicked, browser will be opened for a url link. Generally, it is working. But a weird thing is that, when I click background, then click the picture, the browser will not be open. Until I click the second time on the picture, the browser opens. The steps to reproduce is below: Click on the home screen widget background. Click on the image on the home screen. The browser is not opened. Click on the image again. The browser is opened. If I didn't click on the background, the image will react to click very well, i.e. browser will be open when the image is clicked the first time. The widget XML file is as below: <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/widget" android:layout_width="320dip" android:layout_height="200dip" android:background="@drawable/prt_base" > <ImageView android:id="@+id/picture1" android:layout_width="134dip" android:layout_height="102dip" android:layout_marginLeft="62dip" android:layout_marginTop="6dip" android:scaleType="center" android:src="@drawable/picture1" /> </RelativeLayout> The code to set OnClick on the picture1 ImageView is as below: defineIntent = new Intent(Intent.ACTION_VIEW, Uri .parse("http://www.google.com")); pendingIntent = PendingIntent .getActivity(context, 0 /* no requestCode */, defineIntent, 0 /* no flags */); updateViews.setOnClickPendingIntent( picId, pendingIntent); Anyone knows what's wrong? Thanks.

  Read the article

• Is it possible to definitively identify whether a DML command was issued from a stored procedure?

  - by Ed Harper

  I have inherited a SQL Server 2008 database to which calling applications have access through stored procedures. Each table in the database has a shadow audit table into which Insert/Update/Delete operations for are logged. Performance testing on populating the audit tables showed that inserting the audit records using OUTPUT clauses was 20% or so faster than using triggers, so this has been implemented in the stored procedures. However, because this design cannot track changes made directly to the tables through DML statements issued directly against the tables, triggers have also been implemented which use the value of @@NESTLEVEL to determine whether or not to run the trigger (the assumption being that all DML run through stored procedures will have @@NESTLEVEL 1). i.e. the body of the trigger code looks something like: IF @@NESTLEVEL = 1 -- implies call is direct sql so generate history from here BEGIN ... insert into audit table This design is flawed because it won't track updates where DML statements are executed in dynamic SQL, or any other context where @@NESTLEVEL is raised above 1. Can anyone suggest a completely reliable method we can use in the triggers to execute them only if not triggered by a stored procedure? Or is this (as I suspect) not possible?

  Read the article

• ASP.NET MVC URL Routing problem

  - by Sadegh

  hi, i have defined a route as below: context.MapRoute("SearchEngineWebSearch", "search/web/{query}/{index}/{size}", new { controller = "search", action = "web", query = "", index = 0, size = 5 }); and action method to handle request match with that: public System.Web.Mvc.ActionResult Web(string query = "", int index = 0, int size = 5) { if (string.IsNullOrEmpty(query)) return RedirectToRoute("SearchEngineBasicSearch"); var search = new Search(); var results = search.PerformSearch(query, index, size); ViewData["Query"] = query; if (results != null && results.Count() > 0) { ViewData["Results"]= results; return View("Web"); } else return View("Not-Found"); } and form to sent parameter to action method: <% using (Html.BeginForm("Web", "Search", FormMethod.Post)) { %> <input name="query" type="text" value="<%: ViewData["Query"]%>" class="search-field" /> <input type="submit" value="Search" class="search-button" /> <input type="hidden" name="index" value="2" /> <input type="hidden" name="size" value="2" /> <%} %> now after click on submit and sending value to action method all route values updated but url values still is equals to first time of sending parameter. for example if i sent for first time request such as http://localhost/search/web/google and for next time http://localhost/search/web/yahoo, query parameter which passed to action method is yahoo but url after postback is http://localhost/search/web/google still! can anybody help me plz? ;)

  Read the article

• Model-binding an object from the repository by several keys

  - by Anton

  Suppose the following route: {region}/{storehouse}/{controller}/{action} These two parameters region and storehouse altogether identify a single entity - a Storehouse. Thus, a bunch of controllers are being called in the context of some storehouse. And I'd like to write actions like this: public ActionResult SomeAction(Storehouse storehouse, ...) Here I can read your thoughts: "Write custom model binder, man". I do. However, the question is How to avoid magic strings within custom model binder? Here is my current code: public class StorehouseModelBinder : IModelBinder { readonly IStorehouseRepository repository; public StorehouseModelBinder(IStorehouseRepository repository) { this.repository = repository; } public object BindModel(ControllerContext controllerContext, ModelBindingContext bindingContext) { var region = bindingContext.ValueProvider.GetValue("region").AttemptedValue; var storehouse = bindingContext.ValueProvider.GetValue("storehouse").AttemptedValue; return repository.GetByKey(region, storehouse); } } If there was a single key, bindingContext.ModelName could be used... Probably, there is another way to supply all the actions with a Storehouse object, i.e. declaring it as a property of the controller and populating it in the Controller.Initialize.

  Read the article

• Properly maintain sorted state of Array/Set

  - by Jeff

  I'm trying to get data out of my MOC and then create some new objects based on those objects, and put it all back together, while keeping my sort state. The securities come out of the MOC in proper order. And everything seems to be fine until I do the assignment to the game at the bottom from setWithArray. The documentation says that setWithArray removed the duplicate objects, if there are any. I'm wonder if that's messing up my data, but I don't see a good alternative. The data is ultimately being pulled out into a UITableView. When I add items to the game manually, then they stay sorted, so I don't think the breaking of the sort is beyond the scope of what I've included here. NSError *error; NSArray *allTheSecurities = [managedObjectContext executeFetchRequest:request error:&error]; if (allTheSecurities == nil) { // Handle the error. } [request release]; /**/ NSLog( @"Enumerate..." ); NSEnumerator *enumerator = [allTheSecurities objectEnumerator]; id anObject; NSMutableArray *portfolioStocks = [[NSMutableArray alloc] init]; while (anObject = [enumerator nextObject]) { NSLog( @"Iteration... %@", [anObject name] ); NSLog( @"Build a stock..." ); PortfolioStocks *this_stock = (PortfolioStocks *)[NSEntityDescription insertNewObjectForEntityForName:@"PortfolioStocks" inManagedObjectContext:context]; NSLog( @"Set a value..." ); [this_stock setSecurity:(Security *)anObject]; [this_stock setQuantity:[NSNumber numberWithInt:0]]; NSLog( @"Add to portfolioStocks..." ); [portfolioStocks addObject:this_stock]; } //Sorted properly up to here! NSLog( @"Add to portfolio..." ); [game setPortfolio:[NSSet setWithArray:portfolioStocks]]; // <-- This is where it's not sorted anymore.

  Read the article

• How do I create a Status Icon / System Tray Icon with custom text and transparent background using P

  - by Raugturi

  Here is the code that I have so far to define the icon: icon_bg = gtk.gdk.pixbuf_new_from_file('gmail.png') w, h = icon_bg.get_width(), icon_bg.get_height() cmap = gtk.gdk.Colormap(gtk.gdk.visual_get_system(), False) drawable = gtk.gdk.Pixmap(None, w, h, 24) drawable.set_colormap = cmap gc = drawable.new_gc() drawable.draw_pixbuf(gc, icon_bg, 0, 0, 0, 0, w, h) drawn_icon = gtk.gdk.Pixbuf(gtk.gdk.COLORSPACE_RGB, False, 8, w, h) drawn_icon.get_from_drawable(drawable, cmap, 0, 0, 0, 0, w, h) icon = gtk.status_icon_new_from_pixbuf(drawn_icon) This works to get the png into the icon, but falls short in two areas. First, transparency is not working. If I use a 22x22 png with transparent background and the image centered, I end up with sections of other active icons showing up inside of mine, like this: http://i237.photobucket.com/albums/ff311/Raugturi/22x22_image_with_transparency.png The icon it choose to steal from is somewhat random. Sometimes it's part of the dropbox icon, others the NetworkManager Applet. If I instead use this code: icon_bg = gtk.gdk.pixbuf_new_from_file('gmail.png') w, h = icon_bg.get_width(), icon_bg.get_height() cmap = gtk.gdk.Colormap(gtk.gdk.visual_get_system(), False) drawable = gtk.gdk.Pixmap(None, w, h, 24) drawable.set_colormap = cmap gc = drawable.new_gc() drawable.draw_pixbuf(gc, icon_bg, 0, 0, 0, 0, w, h) drawn_icon = gtk.gdk.Pixbuf(gtk.gdk.COLORSPACE_RGB, False, 8, 22, 22) drawn_icon.get_from_drawable(drawable, cmap, 0, 0, 3, 6, w, h) icon = gtk.status_icon_new_from_pixbuf(drawn_icon) And an image that is only 16x11 with the transparent edges removed, what I end up with is this: Same URL but file is 16x11_image_positioned_in_middle.png So how do I end up with a transparent block like the 1st one that doesn't pull in stuff from other icons? As for the second problem, I need the ability to write on the image before converting it to the icon. I tried using draw_glyphs and it told me I should be using Pango layout/context instead. Unfortunately all the Pango tutorials I could find deal with actual windows, not the status icon. Is there a good tutorial out there for Pango that would apply to this issue (and also maybe have at least some explanation of how to tell it what font to use as all of them that I found seem to lack this and it won't write anything without it). Note: Sorry for the lack of actual images and only one working link, apparently this is a spam prevention feature due to my lack of reputation.

  Read the article

• C# / IronPython Interop with shared C# Class Library

  - by Adam Haile

  I'm trying to use IronPython as an intermediary between a C# GUI and some C# libraries, so that it can be scripted post compile time. I have a Class library DLL that is used by both the GUI and the python and is something along the lines of this: namespace MyLib { public class MyClass { public string Name { get; set; } public MyClass(string name) { this.Name = name; } } } The IronPython code is as follows: import clr clr.AddReferenceToFile(r"MyLib.dll") from MyLib import MyClass ReturnObject = MyClass("Test") Then, in C# I would call it as follows: ScriptEngine engine = Python.CreateEngine(); ScriptScope scope = null; scope = engine.CreateScope(); ScriptSource source = engine.CreateScriptSourceFromFile("Script.py"); source.Execute(scope); MyClass mc = scope.GetVariable<MyClass>("ReturnObject ") When I call this last bit of code, source.Execute(scope) runs returns successfully, but when I try the GetVariable call, it throw the following exception Microsoft.Scripting.ArgumentTypeException: expected MyClass , got MyClass So, you can see that the class names are exactly the same, but for some reason it thinks they are different. The DLL is in a different directory than the .py file (I just didn't bother to write out all the path setup stuff), could it be that there is an issue with the interpreter for IronPython seeing these objects as difference because it's somehow seeing them as being in a different context or scope?

  Read the article

• How do you slow down the output from a DOS / windows command prompt

  - by JW

  I have lots of experience of writing php scripts that are run in the context of a webserver and almost no epxerience of writing php scripts for CLI or GUI output. I have used the command line for linux but do not have much expereince with DOS. Lets say I have php script that is: <?php echo('Hello world'); for ($idx = 0 ; $idx < 100 ; $idx++ ) { echo 'I am line '. $idx . PHP_EOL; } Then, I run it in my DOS Command prompt: # php helloworld.php Now this will spurt out the output quckly and i have to scroll the DOS command window up to see the output. I want to see the output one 'screen full' at a time. How do you do that from the perspective of a DOS user? Furthermore, although this is not my main main question, I would be also interested in knowing how to make the php script 'wait for input' from the command prompt.

  Read the article

• Django 1.1 template question

  - by Bovril

  Hi All, I'm a little stuck trying to get my head around a django template. I have 2 objects, a cluster and a node I would like a simple page that lists... [Cluster 1] [associated node 1] [associated node 2] [associated node 3] [Cluster 2] [associated node 4] [associated node 5] [associated node 6] I've been using Django for about 2 days so if i've missed the point, please be gentle :) Models - class Node(models.Model): name = models.CharField(max_length=30) description = models.TextField() cluster = models.ForeignKey(Cluster) def __unicode__(self): return self.name class Cluster(models.Model): name = models.CharField(max_length=30) description = models.TextField() def __unicode__(self): return self.name Views - def DSAList(request): clusterlist = Cluster.objects.all() nodelist = Node.objects.all() t = loader.get_template('dsalist.html') v = Context({ 'CLUSTERLIST' : clusterlist, 'NODELIST' : nodelist, }) return HttpResponse(t.render(v)) Template - <body> <TABLE> {% for cluster in CLUSTERLIST %} <tr> <TD>{{ cluster.name }}</TD> {% for node in NODELIST %} {% if node.cluster.id == cluster.id %} <tr> <TD>{{ node.name }}</TD> </tr> {% endif %} {% endfor %} </tr> {% endfor %} </TABLE> </body> Any ideas ?

  Read the article

• Skipping the BufferedReader readLine() method in java

  - by DDP

  Is there a easy way to skip the readLine() method in java if it takes longer than, say, 2 seconds? Here's the context in which I'm asking this question: public void run() { boolean looping = true; while(looping) { for(int x = 0; x<clientList.size(); x++) { try { Comm s = clientList.get(x); String str = s.recieve(); // code that does something based on the string in the line above } // other stuff like catch methods } } } Comm is a class I wrote, and the receive method, which contains a BufferedReader called "in", is this: public String recieve() { try { if(active) return in.readLine(); } catch(Exception e) { System.out.println("Comm Error 2: "+e); } return ""; } I've noticed that the program stops and waits for the input stream to have something to read before continuing. Which is bad, because I need the program to keep looping (as it loops, it goes to all the other clients and asks for input). Is there a way to skip the readLine() process if there's nothing to read? I'm also pretty sure that I'm not explaining this well, so please ask me questions if I'm being confusing.

  Read the article

• Different standard streams per POSIX thread

  - by Roman Nikitchenko

  Is there any possibility to achieve different redirections for standard output like printf(3) for different POSIX thread? What about standard input? I have lot of code based on standard input/output and I only can separate this code into different POSIX thread, not process. Linux operation system, C standard library. I know I can refactor code to replace printf() to fprintf() and further in this style. But in this case I need to provide some kind of context which old code doesn't have. So doesn't anybody have better idea (look into code below)? #include <pthread.h> #include <stdio.h> void* different_thread(void*) { // Something to redirect standard output which doesn't affect main thread. // ... // printf() shall go to different stream. printf("subthread test\n"); return NULL; } int main() { pthread_t id; pthread_create(&id, NULL, different_thread, NULL); // In main thread things should be printed normally... printf("main thread test\n"); pthread_join(id, NULL); return 0; }

  Read the article

• Using SMO to call Database.ExecuteNonQuery() concurrently?

  - by JimDaniel

  I have been banging my head against the wall trying to figure out how I can run update scripts concurrently against multiple databases in a single SQL Server instance using SMO. Our environments have an ever-increasing number of databases which need updating, and iterating through one at a time is becoming a problem (too slow). From what I understand SMO does not support concurrent operations, and my tests have bore that out. There seems to be shared memory at the Server object level, for things like DataReader context, keeps throwing exceptions such as "reader is already open." I apologize for not having the exact exceptions I am getting. I will try to get them and update this post. I am no expert on SMO and just feeling my way through to be honest. Not really sure I am approaching it the right way, but it's something that has to be done, or our productivity will slow to a crawl. So how would you guys do something like this? Am I using the wrong technology with SMO? All I am wanting to do is execute sql scripts against databases in a single sql server instance in parallel. Thanks for any help you can give, Daniel

  Read the article

• Download dynamic file with GWT

  - by Maksim

  I have a GWT page where user enter data (start date, end date, etc.), then this data goes to the server via RPC call. On the server I want to generate Excel report with POI and let user save that file on their local machine. This is my test code to stream file back to the client but for some reason I think it does not know how to stream file to the client when I'm using RPC: public class ReportsServiceImpl extends RemoteServiceServlet implements ReportsService { public String myMethod(String s) { File f = new File("/excelTestFile.xls"); String filename = f.getName(); int length = 0; try { HttpServletResponse resp = getThreadLocalResponse(); ServletOutputStream op = resp.getOutputStream(); ServletContext context = getServletConfig().getServletContext(); resp.setContentType("application/octet-stream"); resp.setContentLength((int) f.length()); resp.setHeader("Content-Disposition", "attachment; filename*=\"utf-8''" + filename + ""); byte[] bbuf = new byte[1024]; DataInputStream in = new DataInputStream(new FileInputStream(f)); while ((in != null) && ((length = in.read(bbuf)) != -1)) { op.write(bbuf, 0, length); } in.close(); op.flush(); op.close(); } catch (Exception ex) { ex.printStackTrace(); } return "Server says: " + filename; } } I've red somewhere on internet that you can't do file stream with RPC and I have to use Servlet for that. Is there any example of how to use Servlet and how to call that servlet from ReportsServiceImpl. Do I really need to make a servlet or it is possible to stream it back with my RPC?

  Read the article

• How do I use Core Data with the Cocoa Text Input system?

  - by the Joel

  Hobbyist Cocoa programmer here. Have been looking around all the usual places, but this seems relatively under-explained: I am writing something a little out of the ordinary. It is much simpler than, but similar to, a desktop publishing app. I want editable text boxes on a canvas, arbitrarily placed. This is document-based and I’d really like to use Core Data. Now, The cocoa text-handling system seems to deal with a four-class structure: NSTextStorage, NSLayoutManager, NSTextContainer and finally NSTextView. I have looked into these and know how to use them, sort of. Have been making some prototypes and it works for simple apps. The problem arrives when I get into persistency. I don't know how to, by way of Cocoa Bindings or something else, store the contents of NSTextStorage (= the actual text) in my managed object context. I have considered overriding methods pairs like -words, -setWords: in these objects. This would let me link the words to a String, which I know how to store in Core Data. However, I’d have to override any method that affects the text - and that seems a little much. Thankful for any insights.

  Read the article

• Why might a silverlight ListBox on Windows Phone not allow me scroll all the way down to the bottom?

  - by Byron Sommardahl

  I have a ListBox in a grid that gets databound when the page loads... pretty straightforward. The problem I'm having is that, after the box is databound, I can scroll... but not all the way to the bottom of the list. It stops an item or two short and won't let me scroll anymore. Here's the listbox XAML: <Grid x:Name="ContentGrid" Grid.Row="2"> <ListBox x:Name="lbFeed" ItemsSource="{Binding Items}" SelectionChanged="lbFeed_SelectionChanged" VerticalAlignment="Top" Width="480"> <ListBox.ItemTemplate> <DataTemplate x:Key="MyDataTemplate"> <StackPanel Orientation="Vertical" Width="430"> <TextBlock Text="Some text" TextAlignment="Center" /> </StackPanel> </DataTemplate> </ListBox.ItemTemplate> </ListBox> </Grid> I can post more code, but I'm still getting my feet wet in XAML and I'm not sure what might be causing this. If you need more context, let me know and I'll add it here.

  Read the article

• Need help with strange Class#getResource() issue

  - by Andreas_D

  I have some legacy code that reads a configuration file from an existing jar, like: URL url = SomeClass.class.getResource("/configuration.properties"); // some more code here using url variable InputStream in = url.openStream(); Obviously it worked before but when I execute this code, the URL is valid but I get an IOException on the third line, saying it can't find the file. The url is something like "file:jar:c:/path/to/jar/somejar.jar!configuration.properties" so it doesn't look like a classpath issue - java knows pretty well where the file can be found.. The above code is part of an ant task and it fails while the task is executed. Strange enough - I copied the code and the jar file into a separate class and it works as expected, the properties file is readable. At some point I changed the code of the ant task to URL url = SomeClass.class.getResource("/configuration.properties"); // some more code here using url variable InputStream in = SomeClass.class.getResourceAsStream("/configuration.properties"); and now it works - just until it crashes in another class where a similiar access pattern is implemented.. Why could it have worked before, why does it fail now? The only difference I see at the moment is, that the old build was done with java 1.4 while I'm trying it with Java 6 now. Workaround Today I installed Java 1.4.2_19 on the build server and made ant to use it. To my totally frustrating surprise: The problem is gone. It looks to me, that java 1.4.2 can handle URLs of this type while Java 1.6 can't (at least in my context/environment). I'm still hoping for an explanation although I'm facing the work to rewrite parts of the code to use Class#getRessourceAsStream which behaved much more stable...

  Read the article

• Centralized Exception handling for Eclipse plug-in

  - by Svilen

  Hello, At first I thought this would be question often asked, however trying (and failing) to look up info on this proved me wrong. Is there a mechanism in Eclipse platform for centralized exception handling of exceptions? For example... You have plug-in project which connects to a DB and issues queries, results of which are used to populate some e.g. views. This is like the most common example ever. :) Queries are executed almost for any user action, from every UI control the plug-in provides. Most likely the DB Query API will have some specific to the DB SomeDBGeneralException declared as being thrown by it. That's OK, you can handle those according to whatever your software design is. But how about unchecked exceptions which are likely to occur, e.g. , when communication with DB suddenly breaks for some network related reason? What if in such case one would like to catch those exceptions in a central place and for example provide user friendly message to the user (rather than the low level communication protocol api messages) and even some possible actions the user could execute in order to deal with the specific problem? Thinking in Eclipse platform context, the question may be rephrased as "Is there an extension point like "org.eclipse.ExceptionHandler" which allows to declare exception handlers for specific (some kind of filtering support) exceptions giving a lot of flexibility with the actual handling?"

  Read the article

• Best practice to create WPF wrapper application displaying screens on demand.

  - by Robbie

  Context: I'm developing a WPF application which will contain a lot of different "screens". Each screen contains a which on its turn contains all the visual elements. Some elements trigger events (e.g., checkboxes), a screen has individual resources, etc. The main application is "wrapper" around these screens: it contains a menubar, toolbar, statusbar and alike (in a DockPanel) and space to display one screen. Through the menubar, the user can choose which screen he wants to display. Goal: I want to dynamically load & display & (event)handle one screen in the space in the main application. I don't want to copy & paste all the "wrapper" stuff in all the different screens. And As I have many complex screens (around 300 - luckily auto-generated), I don't want to load all of them at the start of the application, but only upon request. Question: What do you recommend as the best way to realize this? What kind of things should I use and investigate: Pages or windows or User Control for the screens? Does this affect the event handling?

  Read the article

• Ant: use include and exclude together

  - by Ken

  OK, this seems like it should be really simple. I'm using Apache Ant 1.8, and I have a target which does: <delete file="output/program.tar.bz2"/> <tar basedir="input" destfile="output/program.tar.bz2" compression="bzip2"> <tarfileset dir="input"> <include name="goodfolder1/**"/> <include name="goodfolder2/**"/> <exclude name="**/badfile"/> <exclude name="**/*.badext"/> </tarfileset> </tar> I want it to make a .tar.bz2 of input/goodfolder1 and input/goodfolder2, excluding files named "badfile", and excluding files with extension ".badext". It's giving me a .tar.bz2, but it's including badfile and *.badext -- the excludes seem to be ignored. The order of include/exclude doesn't seem to make a difference. I tried wrapping the includes/excludes in a (the docs say it's implicit?), but it made no difference. I'm sure there's something simple I'm missing, since the manual has a very similar example, though in a somewhat different context. EDIT: It looks like it could be related to the dir="input" attribute: it's adding everything in "input", and then adding everything in the tarfileset to that. Files I want appear twice in the program.tar.bz2, but files that are excluded only appear once. But dir is mandatory, and I don't see how this is different from the examples in the manual.

  Read the article

• Exception in DatePickerDialog

  - by Miya

  Hi, i am trying to create a DatePickerDialog in the class 'dateDisplay.class'. I am calling this activity from 'main.class'. If I call the 'dateDisplay.class' using startActivity(), then the DatePickerDialog works fine. But actually I am using an ActivityGroup (for using tab in my application) and I am starting the 'dateDisplay.class' using the following code : Intent dateIntent=new Intent(context,dateDisplay.class); View v=getLocalActivityManager().startActivity("2",dateIntent.addFlags(Intent.FLAG_ACTIVITY_CLEAR_TOP)).getDecorView(); setContentView(v); But an exception is caught, on calling the onCreateDialog() function. And the process is suddently stopped. It shows TargetInvocationException is occured. How can I correct the code? Following is my code: public Dialog onCreateDialog(int id,Bundle b) { Calendar c=Calendar.getInstance(); int day=c.get(Calendar.DAY_OF_MONTH); int month=c.get(Calendar.MONTH); int year=c.get(Calendar.YEAR); Dialog d = null; if(id==DATE_DIALOG_ID) { return new DatePickerDialog(this,dateChangeListener,year,month,day); } else { return null; } } Please help me.. Thank you..

  Read the article

• SQL Server getdate() to a string like "2009-12-20"

  - by Adam Kane

  In Microsoft SQL Server 2005 and .NET 2.0, I want to convert the current date to a string of this format: "YYYY-MM-DD". For example, December 12th 2009 would become "2009-12-20". How do I do this in SQL. The context of this SQL statement in the table definiton. In other words, this is the default value. So when a new record is created the default value of the current date is stored as a string in the above format. I'm trying: SELECT CONVERT(VARCHAR(10), GETDATE(), 102) AS [YYYY.MM.DD] But SQL server keeps converting that to: ('SELECT CONVERT(VARCHAR(10), GETDATE(), 102) AS [YYYY.MM.DD]') so the result is just: 'SELECT CONVERT(VARCHAR(10), GETDATE(), 102) AS [YYYY.MM.DD]' Here's a screen shot of what the Visual Studio server explorer, table, table definition, properties shows: These wrapper bits are being adding automatically and converting it all to literal string: (N' ') Here's the reason I'm trying to use something other than the basic DATETIME I was using previously: This is the error I get when hooking everything to an ASP.NET GridView and try to do an update via the grid view: Server Error in '/' Application. The version of SQL Server in use does not support datatype 'date'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.ArgumentException: The version of SQL Server in use does not support datatype 'date'. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [ArgumentException: The version of SQL Server in use does not support datatype 'date'.] Note: I've added a related question to try to get around the SQL Server in use does not support datatype 'date' error so that I can use a DATETIME as recommended.

  Read the article

• Seeding many to many tables with Entity Framework

  - by Doozer1979

  I have a meeting entity and a users entity which have a many to many relationship. I'm using Autopoco to create seed data for the Users and meetings How do i seed the UserMeetings linking table that is created by EntityFramework with seed data? The linking table has two fields in it; User_Id, and Meeting_ID. I'm looping through the list of users that autopoco creates and attaching a random number of meetings Here's what i've got so far. foreach (var user in userList) { var rand = new Random(); var amountOfMeetingsToAdd = rand.Next(1, 300); for (var i = 0; i <= amountOfMeetingsToAdd; i++) { var randomMeeting = rand.Next(1, MeetingRecords); //Error occurs on This line user.Meetings.Add(_meetings[randomMeeting]); } } I got an 'Object reference not set to an instance of an object.' even though the meeting record that i'm trying to attach does exist. For info all this is happening prior to me saving the context to the DB.

  Read the article

• Serializing Configurations for a Dependency Injection / Inversion of Control

  - by Joshua Starner

  I've been researching Dependency Injection and Inversion of Control practices lately in an effort to improve the architecture of our application framework and I can't seem to find a good answer to this question. It's very likely that I have my terminology confused, mixed up, or that I'm just naive to the concept right now, so any links or clarification would be appreciated. Many examples of DI and IoC containers don't illustrate how the container will connect things together when you have a "library" of possible "plugins", or how to "serialize" a given configuration. (From what I've read about MEF, having multiple declarations of [Export] for the same type will not work if your object only requires 1 [Import]). Maybe that's a different pattern or I'm blinded by my current way of thinking. Here's some code for an example reference: public abstract class Engine { } public class FastEngine : Engine { } public class MediumEngine : Engine { } public class SlowEngine : Engine { } public class Car { public Car(Engine e) { engine = e; } private Engine engine; } This post talks about "Fine-grained context" where 2 instances of the same object need different implementations of the "Engine" class: http://stackoverflow.com/questions/2176833/ioc-resolve-vs-constructor-injection Is there a good framework that helps you configure or serialize a configuration to achieve something like this without hard coding it or hand-rolling the code to do this? public class Application { public void Go() { Car c1 = new Car(new FastEngine()); Car c2 = new Car(new SlowEngine()); } } Sample XML: <XML> <Cars> <Car name="c1" engine="FastEngine" /> <Car name="c2" engine="SlowEngine" /> </Cars> </XML>

  Read the article

< Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >