Search Results

Search found 12705 results on 509 pages for 'ip routing'.

Page 406/509 | < Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >

• 12.04 WiFi issue on a particular access point

  - by user71706

  I have a WiFi access point that I connect to a PC to share its Internet connection with multiple machines, in a training environment. All the machines with 11.04 connect to this access point with no problem, and can access any server on the Internet. These machines have an Intel Wireless -N 1030 BGN chipset (as reported by lspci). Now, my problem is that I don't manage to connect 12.04 machines to this wireless network. The systems I tried do manage to connect (confirmed by Network Manager), but when I try to access a website like http://kernel.org, the browser shows "Connecting to kernel.org...", but displays a "The connection has timed out" error page. Other symptoms: Name resolution works (for example 'nslookup kernel.org') finds kernel.org's IP address 'ping kernel.org' doesn't work The same 12.04 machines have no problem at all with other wireless networks. So there is probably something weird in my access point (though the 11.04 machines are not impacted). Would you have any suggestions for investigating this issue? Thanks, Michael.

  Read the article

• Wireless drivers

  - by Kencer

  The results for my laptop are as below. How will i install wireless drivers and graphics? $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 02:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) $ sudo lshw -c network *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0500000-f0507fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 07 serial: 3c:97:0e:85:c0:0d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=172.16.96.36 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff $ rfkill list all 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

• Internet Timeouts with TP-Link TL-WN821N v2 wireless usb stick

  - by user1622959

  A short time after accessing the internet, the browser/download times out. Before the timeout, the internet works OK briefly; afterwards, the wireless is still connected with a strong signal, but every internet access results in a timeout. When I leave the PC for a while, the internet is back just to timeout again as soon as I start using it. The same happens when I reconnect to the router. Also, when I surf the internet, it takes a couple of minutes until the timeout, but when I download something, it times out in a matter of seconds. The wireless adapter works just fine in Windows and internet via ethernet cable works just fine in Ubuntu. Does anyone have the same problem or knows a solution. I use Ubuntu 12.10 x64. The problem occurs since I installed ubuntu (which was a few days ago). Here some stuff that might be usefull: serus@serus-Ubuntu-PC:~$ lsusb Bus 002 Device 002: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 802.11n [Atheros AR9170] serus@serus-Ubuntu-PC:~$ lsmod Module Size Used by carl9170 82083 0 serus@serus-Ubuntu-PC:~$ modinfo carl9170 filename: /lib/modules/3.5.0-21- generic/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko alias: arusb_lnx alias: ar9170usb firmware: carl9170-1.fw description: Atheros AR9170 802.11n USB wireless serus@serus-Ubuntu-PC:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"virginmedia0137463" Mode:Managed Frequency:2.462 GHz Access Point: A0:21:B7:F8:29:B6 Bit Rate=240 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:1399 Invalid misc:18 Missed beacon:0 serus@serus-Ubuntu-PC:~$ sudo lshw -C network *-network description: Wireless interface physical id: 1 bus info: usb@2:2 logical name: wlan0 serial: 00:27:19:bb:00:19 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.5.0-21-generic firmware=1.9.4 ip=192.168.0.6 link=yes multicast=yes wireless=IEEE 802.11bgn

  Read the article

• Tumblr custom domain not redirecting properly

  - by Manic

  I decided to host my blog at Tumblr, using their custom domain setup (http://blog.smokingfishgames.com/ instead of http://smokingfishgames.tumblr.com). However, it's been 72 hours and I'm still getting spotty redirection. It works some of the time--I go and see the page and blog, and it's all fine. However, it occasionally just stops working and redirects back to my web host, which is a directory with nothing but a single file called BUGGER.html (which I stuck in to make sure that it was my web host and not some Tumblr empty directory). Clearing the Chrome DNS cache makes the problem go away--for a while. After a few minutes, or an hour, or however long, I'll start seeing BUGGER.html again. I clear the cache, and poof, the blog shows up. The thing that's curious to me is that when I clear the cache and get BUGGER.html again (which happens occasionally), I can look at my Chrome DNS cache and see assets.tumblr.com UNSPECIFIED blog.smokingfishgames.com UNSPECIFIED www.tumblr.com UNSPECIFIED IP addresses and expiration times omitted for brevity's sake--if they're important I'm sure I can replicate the issue. This implies, to me anyway, that my browser is reaching Tumblr but getting bounced back to my web host. Any reason why this would be happening, or is this a normal symptom of DNS propagation? If it is a problem, should I be bothering Tumblr or my host with it, or is this something I can fix myself?

  Read the article

• Solution for lightweight LAN peer discovering?

  - by DevilWithin

  I built a library for purely cross-platform programming. My games made with it run fine in Android , Pc, Linux, Mac etc. The networking capabilities are provided by ENET library, therefore all communication between my apps is not TCP or UDP compatible, but only in the custom protocol, even tough its based on the UDP ultimately. I don't think its possible to do what i want with ENET, thats why I ask here for help! Lets say I have the same game running in my Android phone, my laptop and my pc. They are all in the same wifi network, and therefore in a LAN, whether its Wifi hotspot(?) or the household router. I need each of those 3 peers to discover the other two in the network. This is meant only to find the IP of alive apps in the LAN network, to be able to host multiplayer games between them. I can only think of one effective way to do this, UDP broadcast, wait responses, but if that is the solution, i need something small, since its the only purpose of the implementation. Other way could be to try to connect to all IPs in the LAN address subrange, but I don't think the OS would be with me on this one :p Sorry for the long question!

  Read the article

• NMap 6.01

  - by TATWORTH

  NMap 6.01 has been released at http://nmap.org/download.html"Nmap ("Network Mapper") is a free and open source (license) utility for network discovery and security auditing. Many systems and network administrators also find it useful for tasks such as network inventory, managing service upgrade schedules, and monitoring host or service uptime. Nmap uses raw IP packets in novel ways to determine what hosts are available on the network, what services (application name and version) those hosts are offering, what operating systems (and OS versions) they are running, what type of packet filters/firewalls are in use, and dozens of other characteristics. It was designed to rapidly scan large networks, but works fine against single hosts. Nmap runs on all major computer operating systems, and official binary packages are available for Linux, Windows, and Mac OS X. In addition to the classic command-line Nmap executable, the Nmap suite includes an advanced GUI and results viewer (Zenmap), a flexible data transfer, redirection, and debugging tool (Ncat), a utility for comparing scan results (Ndiff), and a packet generation and response analysis tool (Nping)."Home page is at http://nmap.org/  Nmap is free to download and use. You can download the source and compile it yourself if you so require.

  Read the article

• Ubuntu 12.04 desktop, VNC viewer not refreshing screen

  - by user73279

  I've had this issues across multiple machines and multiple versions of Ubuntu desktop (all 10.04 or later). Usually it happens with an old laptop I've put Ubuntu on but now it's happening on my primary dev machine (a quad-core PC recently upgraded to Ubuntu 12.04 desktop). The problem is this - I can connect to the machine and login with the password, the initial screen looks fine but never refreshes. I can see the monitor for the machine across the room and can see the mouse move and the menus pop up but the image of the screen on the PC in front me running the VNC viewer never updates. So the mouse and keyboard commands are working. Ubuntu 12.04 Desktop Ultra VNC Viewer (also seen with RealVNC's free VNC viewer) Desktop Sharing Static IP on eth0; Dynamic ID on eth1 I think it is an Ubuntu config issue because this PC used to work just fine with 9.04, 10.04, and 11.10 (over the past couple of years). I've also had a couple of laptops that used to have this issue with older Ubuntu's but don't with 12.04. Additional info: The Win7 PC I'm trying to use to control the Ubuntu PC is connected via 2 DLink 8-port gigabit routers. The Ubuntu laptop I usually control via VNC is typically only connected to the network via wireless. The screen refresh is choppy but usable. I've repeated the issue on a Win7 laptop which was connected via ethernet and wireless.

  Read the article

• wireless is disabled by hardware lenovo 3000g430

  - by sudheer

  sir i have problem with my wifi switch sir please tell me solution for my problem (wifi is disabled by hardware). output of sudo lshw -C network is sudo] password for sudheer: *-network DISABLED description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:06:00.0 logical name: eth2 version: 01 serial: 00:21:00:72:3a:93 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:19 memory:f4700000-f4703fff *-network description: Ethernet interface product: NetLink BCM5906M Fast Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 02 serial: 00:1e:68:ad:24:0b size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=sb v3.04 ip=172.16.52.79 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:47 memory:f4600000-f460ffff output of iwconfig is lo no wireless extensions. eth2 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. sudheer@sudheer:~$ sudo iwlistscanning sudo: iwlistscanning: command not found ***sudheer@sudheer:~$ sudo iwlist scanning*** lo Interface doesn't support scanning. eth2 Failed to read scan data : Invalid argument eth0 Interface doesn't support scanning.

  Read the article

• use subdomain on different host

  - by Roy

  I want to accomplish something that I thought was simple. My wish is as follows: I have a domainname with hosting, a WordPress multisite (with subfolder setup) installed and running: gangleri.nl. I have another domain at another host and without hosting: monas.nl I created a subdomain on gangleri.nl: monas.gangleri.nl and the domain redirects to that subdomain. Now what I want is to have monas.nl act like a website, not a website in a subdomain. I would like to have post urls as in monas.nl/posttitle. I first thought to do this with the DNS settings of Monas.nl. I now have an URL forward, CURL is not what I want and I did not manage to get A-records or CNAMEs to work. I tried using the htaccess file of the WP installation in monas.gangleri.nl. I tried 301, rewrite and whatnot, but also without success. Meanwhile, I have been reading so much that I no longer have a clue what to do. A-record doesn't sound probable, since I have no IP for the subdomain, so an A-record would point to gangleri.nl rather than using the subdomain. Also I have no idea if I should do something in the DNS settings of gangleri.nl or monas.nl, both, one of them and something somewhere else. I have the idea that I've tried everything, but the more I try and read about it, the less I can get my head around. People talking about A-records to subdomains while I can only use IPs, CNAME settings that my host doesn't support or something. Could somebody tell me if what I want is possible and if so, take me by the hand and guide me through it?

  Read the article

• ksoftirqd uses 100% cpu

  - by andy

  I am running 32bit Ubuntu 10.04. A lot of the times ksoftirqd/0 or ksoftirqd/1 start using up 100% CPU for no apparent reason, and I am forced to reboot my laptop. Incidentally this also happens when I maximize my (youtube) videos on Chrome and Fireox, but once I un-maximize the videos the CPU usage goes down to the original levels. Any ideas what it going on? --- Addendum --- dmesg produces a ~2000 line output. I searched for 'error' and 'warning' in the output, and here are the relevant lines (along with some headers): [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=157dcfda-acd6-4d1b-a6a8-ff9ccff61906 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 24.775546] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [44920.210518] ata1: SError: { PHYRdyChg CommWake 10B8B Dispar LinkSeq TrStaTrns } [44920.210531] res 40/00:00:f0:4b:7f/00:00:18:00:00/40 Emask 0x10 (ATA bus error) [58673.134623] chrome[20101]: segfault at 7f38bc4ad000 ip 00007f38be769ecc sp 00007fff24616850 error 4 in libpepflashplayer.so[7f38bdc08000+e55000] [ 24.775546] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [44920.210531] res 40/00:00:f0:4b:7f/00:00:18:00:00/40 Emask 0x10 (ATA bus error)

  Read the article

• wireless blocked after installing ubuntu 12.04

  - by Cornelia Frank

  I am using a lenovo S10-3 ideapad; had no problems with earlier version of ubuntu, only since installing 12.04. Have looked through many of the questions on the same issue and tried potential solutions but cannot seem to solve my problem. The hardware switch is in 'on' position and the wireless light comes on very briefly (2-3 sec) when the laptop starts up but then goes off and stays off. Pressing FN+F5 does nothing at all. I'd be grateful for any assistance. Cornelia Have received the following responses in Terminal: cf@cf-Lenovo:~$ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes cf@cf-Lenovo:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. cf@cf-Lenovo:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: 00:26:9e:ee:7f:4c size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=10.0.1.8 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0520000-f0520fff memory:f0510000-f051ffff memory:f0540000-f055ffff *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:09:00.0 logical name: wlan0 version: 01 serial: c4:17:fe:f8:bc:d7 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:f0100000-f010ffff WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

  Read the article

• Can't get wireless working after installing ubuntu 12.10 on acer aspire 5560-7414

  - by markdel

  I have been struggling all day trying different solutions from different posts on how to get my wifi working but none have worked. Any help would be greatly appreciated. Below are some wireless preferences to help find the problem. mark@mark-Aspire-5560:~$ sudo rfkill list all [sudo] password for mark: 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 1: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no *-network description: Ethernet interface product: NetLink BCM57785 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 10 serial: 20:6a:8a:7f:63:82 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=full firmware=sb ip=158.65.194.244 latency=0 link=yes multicast=yes port=twisted pair speed=10Mbit/s resources: irq:16 memory:f0000000-f000ffff memory:f0010000-f001ffff memory:f0050000-f00507ff *-network description: Wireless interface product: BCM43227 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 00 serial: 08:ed:b9:01:e0:8b width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.112 latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:f0100000-f0103fff

  Read the article

• exception occurred for backend host '127.0.0.1/7001/7001': 'CONNECTION_REFUSED [os error=0, line 1715 of URL.cpp]: Error connecting to host 127.0.0.1:7001'

  - by Vijaya Moderator -Oracle

  When you hit the WLS Server via Proxy server, we may get the issue like below... [09/Jun/2014:06:05:50] failure ( 3284): for host 127.0.0.1 trying to GET /.../soundlink_wireless_​speaker/index.jsp, wl-proxy reports: exception occurred for backend host '127.0.0.1/7001/0': 'PROTOCOL_ERROR [line 835 of URL.cpp]: Backend Server not responding' [09/Jun/2014:06:05:50] failure ( 3284): for host 127.0.0.1 trying to GET /.../soundlink_wireless_​speaker/index.jsp, wl-proxy reports: exception occurred for backend host '127.0.0.1/7001/0': 'PROTOCOL_ERROR [line 835 of URL.cpp]: Backend Server not responding' [09/Jun/2014:06:05:51] failure ( 3284): for host 127.0.0.1 trying to GET /.../soundlink_wireless_​speaker/index.jsp, wl-proxy reports: exception occurred for backend host '127.0.0.1/7001/7001': 'CONNECTION_REFUSED [os error=0, line 1715 of URL.cpp]: Error connecting to host 127.0.0.1:7001' To solve the issue 1.  Check if there is any issue at the firewall by executing the below command     telnet 127.0.0.1 7001 2.  Also access  using the hostname instead of IP Address  If it errors out like below   Microsoft Telnet> o 127.0.0.1 7001 connecting to 127.0.0.1  Warning thrown at weblogic console: <BEA-000449> <Closing socket as no data read from it on 127.0.0.1:54,356 during the configured idle timeout of 5 secs>  Test the same again by disabling the firewall. Below are the steps... 1)Go to Start ----> Run  2)Type services.msc  3)In services.msc search for "Windows Firewall" and Right Click on "Windows Firewall"---->Select Stop. 4)Access the Weblogic URL  If the issue is resolved after disabling firewall, Request your  OS System Admin to open the port 7001 at the firewall end to access the application

  Read the article

• Existing laravel 4 project gives 404 in browser

  - by Richard A

  I'm trying to set up a development environment on a virtual machine running Ubuntu 14.04 LTS using Nginx and HHVM. To do this, I followed the tutorial here. This goes well with a new installation of Laravel. But when I import an existing Laravel 4 project and try to open that on my actual machine (which will serve as the client running Windows 7), I'm getting a 404 File Not Found error on the screen while connecting to http://sav.savrichard.dev. I did add this to the hosts file with the correct IP Address. The virtual machine is receiving the request and responds with a 404 error. How do I solve this error? I'm pretty new to Ubuntu so I'm not exactly sure what's wrong. The project is located at /var/www/sav.savrichard.net The server configuration is as follow: server { listen 80 default_server; root /var/www/sav.savrichard.net/public; index index.html index.htm index.php; server_name sav.savrichard.dev; access_log /var/log/nginx/localhost.sav.savrichard.dev-access.log; error_log /var/log/nginx/localhost.sav.savrichard.dev-error.log error; charset utf-8; location / { try_files \$uri \$uri/ /index.php?\$query_string; } location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { log_not_found off; access_log off; } error_page 404 /index.php; include hhvm.conf; # Deny .htaccess file access location ~ /\.ht { deny all; } } And the hhvm.conf file is: location ~ \.(hh|php)$ { fastcgi_keep_conn on; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; }

  Read the article

• Network configuration problem

  - by Musti

  in my dorm I have to change network configuration and then if it is successfull, I have to enter a user name and password for wired internet connection. Anyway, I had many attempts but I couldnt achieve, and please look at my steps and tell me if there is something wrong and at the end there is an error, but I really dont have any idea about this error. (I am a new ubuntu user, and network is far away of my interests) 1) /etc/network/interfaces auto eth0 iface eth0 inet static address 172.030.014.038 netmask 255.255.255.252 network 192.168.2.0 broadcast 192.168.2.255 gateway 172.030.014.038 2) sudo gedit /etc/resolv.conf nameserver 010.050.001.001 nameserver 010.050.001.002 3) /etc/init.d/networking stop Deconfiguring network interfaces... [ OK ] 4) /etc/init.d/networking restart Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces Reconfiguring network interfaces... 172.030.014.038: Unknown host ifconfig: `--help' gives usage information. Failed to bring up eth0 Note: IP-address, netmask, gateway, Preferred DNS server and Alternate DNS server ara given by the management of Dorm. It wad very easy in windows but I couldnt achieve in Ubuntu. I also tried to edit from "edit connections" but the save button is gray and I cannot save it. Thanks in advance. / Musti

  Read the article

• Is browser and bot whitelisting a practical approach?

  - by Sn3akyP3t3

  With blacklisting it takes plenty of time to monitor events to uncover undesirable behavior and then taking corrective action. I would like to avoid that daily drudgery if possible. I'm thinking whitelisting would be the answer, but I'm unsure if that is a wise approach due to the nature of deny all, allow only a few. Eventually someone out there will be blocked unintentionally is my fear. Even so, whitelisting would also block plenty of undesired traffic to pay per use items such as the Google Custom Search API as well as preserve bandwidth and my sanity. I'm not running Apache, but the idea would be the same I'm assuming. I would essentially be depending on the User Agent identifier to determine who is allowed to visit. I've tried to take into account for accessibility because some web browsers are more geared for those with disabilities although I'm not aware of any specific ones at the moment. The need to not depend on whitelisting alone to keep the site away from harm is fully understood. Other means to protect the site still need to be in place. I intend to have a honeypot, checkbox CAPTCHA, use of OWASP ESAPI, and blacklisting previous known bad IP addresses.

  Read the article

• Access a PLESK website before propagation?

  - by RCNeil

  My web host uses Plesk and I want to know if there is anyway to access and view a website (with PHP and other processes being functional) without propagation of the domain name? I have found countless forums on this but they are all pretty old (circa 01-04) and involve either tricking your localhost or SSH commands and some even result in terrible security risks. I would like to access a web page directory through a browser and see it's contents while having the PHP processes carry out... before I propagate it's potential domain name. People claim this is pointless but during a site migration why on earth would you not test a site before propagating it? I'm looking for something similar to what cPanel offers i.e. http://IP.ADDRESS./~mydomain.com The only solution I could think of is storing the site in a new directory of an already functional site and then setting up databases and testing the site once it's complete. Once tested and working I should be easily be able to migrate the files to the "new" domain name's root directory and just setup a new databases and then propagate the domain name. I can't believe that Plesk V10+ still does not have a site preview method that includes PHP, JS, and Flash ability.

  Read the article

• Tipps & Tricks rund um CRSCTL

  - by Sebastian Solbach (DBA Community)

  Egal ob Single Instanz oder für Real Applikation Cluster Datenbanken die Grid Infrastruktur findet man bei immer mehr Systemen im Einsatz. Das liegt sowohl an der vereinfachten Überwachungstätigkeiten für die Oracle Datenbank, Listener und ASM Instanz, als auch an einigen weiterführenden Features, wie der einfachen Service Verwaltung für Single Instanz, DataGuard und/oder RAC. Dabei kommen insbesondere den Cluster Ready Services (CRS), einem Bestandteil der Clusterware Komponente der Grid Infrastruktur, eine wichtige Bedeutung zu, da diese intern alle Ressourcen steuert. Ressourcen können hierbei natürlich nicht nur die Oracle Prozesse (Datenbank, Listener, Virtuelle IP Adressen etc.) sein, sondern auch eigene Applikationen, die unter die Überwachung der Grid Infrastruktur resp. Clusterware gestellt werden. Dies kann von simplen Neustartanforderungen im Single Server Betrieb bis zu klassischen Failover Szenarien in Clusterumgebungen reichen. Diesem Aspekt trägt auch die Tatsache Rechnung, dass es seit einiger Zeit generische Applikations-Agenten (Siebel, Tomcat, GoldenGate, Apache, ...) für die Clusterware gibt und eine abgespeckte GI Installation auf der Oracle eigenen Middleware Hardware (Exalogic) läuft, um die Prozesse zu überwachen. Diese Cluster Ready Services werden vom Befehl "crsctl" gesteuert. Deshalb lohnt es sich dieses Utility mal genauer anzuschauen, zumal es einige Feinheiten enthält, die nicht direkt aus der Dokumentation bzw. Hilfe des Tools ersichtlich sind.

  Read the article

• How to model the components of a non Information System?

  - by Adel C Kod

  So I am working on a project that's related to the Kernel code(specifically related to the TCP/IP stack of the kernel). I need to build some models to describe the functionality and components of my system. Initially I thought about Class Diagram, it can describe the general architecture of my system but it doesn't make sense since my code is VERY structured(written in standard C). I also thought about DFDs, they'd describe the processes of my system, and how the data is flowing. But they contain something which doesn't really fit in; data-storages. I have no databases here(at all). For the functionality, other team members suggested using Activity and Sequence diagrams, which is kinda okay with me, but what about the system components? So basically my question is; I want to describe the components of my system; what do you suggest as a meaningful diagram to follow? (Again, the project is a research low-level systems-oriented project with almost no user-interface at all)

  Read the article

• Wireless connection disconnects and reconnects with a Netgear WNA1000

  - by William Berkenkamp

  Ever since I made the permanent switch from Vista to Ubuntu i've had wireless connectivity problems. From watching the network manager when it disconnects it seems like it turns off the receiver for some reason. Could it be bad drivers? I used their install software and the site doesn't really offer driver downloads. The adapter is a Netgear WNA1000 if memory serves, and I don't know much about the router except that it's a Motorola Surfboard. And I figure this might help a bit *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: 00:1b:b9:a7:39:a4 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:40 ioport:d800(size=256) memory:feaff000-feafffff memory:feac0000-feadffff *-network description: Wireless interface physical id: 1 bus info: usb@2:1.1 logical name: wlan0 serial: 00:26:f2:8b:fb:38 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.2.0-24-generic-pae firmware=1.9.4 ip=10.0.0.36 link=yes multicast=yes wireless=IEEE 802.11bgn I have tried installing WICD and it didn't fix the problem. Any help would be greatly appreciated. This problem is greatly limiting what I can do with my computer.

  Read the article

• Hostmonster can't change domains around?

  - by loneboat

  (question imported from http://superuser.com/q/204439/53847 ) Horrible title, but I couldn't think of a succinct way to summarize it to fit. I have HostMonster for my web hosting. I have several domain names under the same account (using the same web space, IP address, etc...). Every HM account has one domain set up as the "main domain", and all other domains are "secondary". The only way I have ever encountered this being an issue is in trying to use HTTPS - since (from my limited understanding) HTTPS encrypts headers, you can't route HTTPS requests to different virtual hosts on a server - only unencrypted requests, since it must look in the request to know where to route it. When I registered for my account, I only had one domain name (A). I have since added domain names (B), (C), (D), etc... At one point I switched domain name (B) to be my "main" domain name - so I could use HTTPS with it. I have since sold domain name (B), and would like to make domain name (A) my "main" one again (as it was before), but HM support says, "no, once a domain name has been a 'main' domain name on an account once, we can't set it up to be a 'main' domain name again. You're welcome to use domains (C), or (D), though.". They tell me the only way to reuse domain (A) as a "main" domain would be to set up a new account and transfer over all my files. I'm confused here. If I have domains (D), (E), and (F), they say I'm welcome to make one of them my new main domain name, just never (A) again, since I've already "used" it once. Calls to support only reveal that they can't let me do it because doing so would somehow "break" my account. Can anyone think of any good reason why this should be so? The only thing I can think is that maybe they're using the domain names as keys in some database or something? But if that's the case, that's ridiculous - they need to reorganize their databases!

  Read the article

• HP DV6 connects but no internet

  - by Frank Barcenas

  I have a Hewlett Packard DV6. I connected to the access point. I receive an IP address/default gateway/DNS,etc(DHCP). I cannot ping my gateway. DNS lookups fails. There is just no connectivity. My driver is listed as being IWLWIFI. An lspci shows my card to be a Realtek RTL8101E/RTL8102E. I can't ping myself from another computer. eth0 Link encap:Ethernet HWaddr c8:0a:a9:0c:a7:45 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:41 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:561 errors:0 dropped:0 overruns:0 frame:0 TX packets:561 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:42164 (42.1 KB) TX bytes:42164 (42.1 KB) wlan0 Link encap:Ethernet HWaddr 00:26:c7:04:97:c0 inet addr:192.168.1.109 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::226:c7ff:fe04:97c0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:71 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2035 (2.0 KB) TX bytes:12371 (12.3 KB)

  Read the article

• Website migration is not working for all computers

  - by Shadowizoo

  We got 2 servers on same network, Server-A and Server-B. On Server-A (widows server 2003), we have IIS 5.2 and our website was hosted on it few month ago (about 7-8 months). We bought a new server, Server-B (Windows Server 2008) with IIS 7.5 and copied our old website on this new machine. On our router, we forward the port 80 to Server-B. The Server-A is still on because we need to access some old data by our old website. I would like to access it with it's internal Ip (192.168.1.xxx/mywebsite) On my Windows 7 computer, if I write www.example.com or example.com (without www.), I'm being redirected to Server-B and I can see our new interface. On some Windows Vista computer, example.com (without www.) redirect to Server-B, but if I write www.example.com, I'm still on Server-A. In our website code (on Server-B), we sometimes redirect with a "www." so this is causing some error because we are trying to access a webpage that exist on Server-B but not Server-A and because the www.example I compared 2 computers with Vista Home on them and Internet Options looks the same. I cannot figure why this is happening

  Read the article

• Could crosslinking using very general anchor texts be a reason for a drop in rankings?

  - by webmasters

  I have crosslinked 20 sites and I thought I have been penalized for this, asked this question and some experienced members told me maybe that crosslinking may not necessarily be the reason. The sites are on same host, different C class IP and every site in linked to each other. Each site targets long tail kewords. Site 1 - BMW Used Cars - and my area Site 2 - WW Used Cars - and my area And so on... When I crosslinked them (in the sidebar), I did it for the users; instead of repeating the terms used cars and my location over and over (since my users are targeted) I just crosslinked them using the brand: BMW, WW. Targeting locally, my niches are not overly competitive, so I did not need to many external links to rank on various positions on the 1st page. I'm thinking that when I chose to link using only the brand, google might have thought I wanted to actually rank for BBW and WW, hence the drop in my targeted local traffic. Could this be? I now have no-followed the links and I am noticing a slight recovery, but if it's not a interlinking penalty it would be a shame not to benefit from my links.

  Read the article

• How do I connect to a wireless network?

  - by Keith Groben

  I just installed 10.10 x64 and cannot even find my wireless network let alone connect to it. I've searched all over SE and Ubuntu forums and cannot find out how to do this simple thing. Can some one please give me the answer? It is plugged in right now and is 100% updated. It is a Desktop with wireless card. 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Here's the output: *-network DISABLED description: Wireless interface product: RT2860 vendor: RaLink physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 70:1a:04:f4:de:e9 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=2.6.35-27-generic firmware=N/A latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:fcff0000-fcffffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: 00:23:54:fd:c2:32 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.14 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:44 ioport:d800(size=256) memory:fceff000-fcefffff memory:ddffc000-ddffffff memory:fcec0000-fcedffff === Update === I have discovered that this is a know issue with the rt2860. I have been following step by step the instructions found here: http://www.ctbarker.info/2010/05/ubuntu-1004-wireless-chipsets-and-wpa.html I decided to stat over because I was getting stuck on step 5: 'sudo rmmod rt2860sta' is was giving me this problem: 'ERROR: Module rt2860sta does not exist in /proc/modules' Since I started over I cannot even get past step 5 'sudo make' I get this: 'make: * No targets specified and no makefile found. Stop.' I am lost. Any help would be appreciated.

  Read the article

< Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >