Search Results

Search found 24651 results on 987 pages for 'slackware linux'.

Page 406/987 | < Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >

• Wi-Fi Stick with ZD1211 chip refuses to work on Ubuntu >8.10. No clue.

  - by Benjamin Maus

  I have a machine running Ubuntu 9.10 (Karmic *x86_64*). Everything is running smooth so far, except for the Wi-Fi USB Stick. The same device worked perfectly in 8.10. The wireless device is a GW-US54GXS using the Zydas Zd1211 chipset. Dmesg output after plugging in: [ 196.303436] phy0: Selected rate control algorithm 'minstrel' [ 196.304209] zd1211rw 2-1:1.0: phy0 [ 196.304227] usbcore: registered new interface driver zd1211rw [ 196.334137] usb 2-1: firmware: requesting zd1211/zd1211b_ub [ 196.357463] usb 2-1: firmware: requesting zd1211/zd1211b_uphr [ 196.402643] zd1211rw 2-1:1.0: firmware version 4725 [ 196.442611] zd1211rw 2-1:1.0: zd1211b chip 2019:5303 v4810 high 00-90-cc AL2230_RF pa0 ---N- [ 196.463814] usb 2-1: firmware: requesting zd1211/zd1211b_ub [ 196.466823] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Syslog output: Nov 5 11:20:24 somesystem kernel: [ 196.303436] phy0: Selected rate control algorithm 'minstrel' Nov 5 11:20:24 kierkegaard NetworkManager: <info> Found radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/ieee80211/phy0/rfkill0) (driver <unknown>) Nov 5 11:20:24 somesystem kernel: [ 196.304209] zd1211rw 2-1:1.0: phy0 Nov 5 11:20:24 somesystem kernel: [ 196.304227] usbcore: registered new interface driver zd1211rw Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wmaster0, iface: wmaster0) Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wmaster0, iface: wmaster0): no ifupdown configuration found. Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wlan0, iface: wlan0) Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wlan0, iface: wlan0): no ifupdown configuration found. Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): driver supports SSID scans (scan_capa 0x01). Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): new 802.11 WiFi device (driver: 'zd1211rw') Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/2 Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): now managed Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): device state change: 1 -> 2 (reason 2) Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): bringing up device. Nov 5 11:20:24 somesystem kernel: [ 196.334137] usb 2-1: firmware: requesting zd1211/zd1211b_ub Nov 5 11:20:24 somesystem kernel: [ 196.357463] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Nov 5 11:20:24 somesystem kernel: [ 196.402643] zd1211rw 2-1:1.0: firmware version 4725 Nov 5 11:20:24 somesystem kernel: [ 196.442611] zd1211rw 2-1:1.0: zd1211b chip 2019:5303 v4810 high 00-90-cc AL2230_RF pa0 ---N- Nov 5 11:20:24 somesystem NetworkManager: <WARN> nm_device_hw_bring_up(): (wlan0): device not up after timeout! Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): deactivating device (reason: 2). Nov 5 11:20:24 somesystem kernel: [ 196.463814] usb 2-1: firmware: requesting zd1211/zd1211b_ub Nov 5 11:20:24 somesystem kernel: [ 196.466823] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Nov 5 11:20:29 somesystem wpa_supplicant[978]: Could not set interface 'wlan0' UP Nov 5 11:20:29 somesystem wpa_supplicant[978]: Failed to initialize driver interface Nov 5 11:20:29 somesystem NetworkManager: <WARN> nm_supplicant_interface_add_cb(): Unexpected supplicant error getting interface: wpa_supplicant couldn't grab this interface. Gnome tells me in the network menu that the device was "not ready". It appears in iwconfig but not in ifconfig. The same symptoms appear when I boot from the live CD. How can I solve this dilemma?

  Read the article

• Rsync and Lazy mode ?

  - by fabien-barbier

  Since transferring or copying a file that is being used sometimes causes corruption of the transferred file, can we define a time interval in which Rsync checks each file in a given directory to see if there is a change within that time interval ? Files that are not changed during that interval will be transferred, while those that have changes will not. Can I do that with rsync ? Or another tool ? Is there a script to add this functionality to Rsync ? Thanks

  Read the article

• What process is resurrecting mysqld?

  - by ripper234

  I'm following this guide to reset my mysql root password (I'm on ubuntu). When I kill the mysqld process, it immediately gets resurrected. The parent process ID is 1. How can I find what keeps resurrecting mysqld? $ ps -ef | grep mysql mysql 30136 1 0 07:16 ? 00:00:00 /usr/sbin/mysqld root 30295 30274 0 07:18 pts/0 00:00:00 grep --color=auto mysql $ kill -9 30136 $ ps -ef | grep mysql mysql 30302 1 2 07:18 ? 00:00:00 /usr/sbin/mysqld root 30404 30274 0 07:18 pts/0 00:00:00 grep --color=auto mysql $

  Read the article

• CentOS 5.8 - Can't login to tty1 as root after updates?

  - by slashp

  I've ran a yum update on my CentOS 5.8 box and now I am unable to log into the console as root. Basically what happens is I receive the login prompt, enter the correct username and password, and am immediately spit back to the login prompt. If I enter an incorrect password, I am told the password is incorrect, therefore I know that I am using the proper credentials. The only log I can seem to find of what's going on is /var/log/secure which simply contains: 15:33:41 centosbox login: pam_unix(login:session): session opened for user root by (uid=0) 15:33:41 centosbox login: ROOT LOGIN ON tty1 15:33:42 centosbox login: pam_unix(login:session): session closed for user root The shell is never spawned. I've checked my inittab which looks like so: 1:2345:respawn:/sbin/mingetty tty1 2:2345:respawn:/sbin/mingetty tty2 3:2345:respawn:/sbin/mingetty tty3 4:2345:respawn:/sbin/mingetty tty4 5:2345:respawn:/sbin/mingetty tty5 6:2345:respawn:/sbin/mingetty tty6 And my /etc/passwd which properly has bash listed for my root user: root:x:0:0:root:/root:/bin/bash As well as permissions on /tmp (1777) & /root (750). I've attempted re-installing bash, pam, and mingetty to no avail, and confirmed /bin/login exists. Any thoughts would be greatly appreciated. Thanks!! -slashp

  Read the article

• Understanding connection tracking in iptables

  - by Matt

  I'm after some clarification of the state/connection tracking in iptables. What is the difference between these rules? iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT Is connection tracking turned on when a packet is first matched containing -m state --state BLA , or is connection tracking always on? Can/Should connection state be used for fast matching like below? e.g. suppose this is some sort of router/firewall (no nat). # Default DROP policy iptables -P INPUT DROP iptables -P OUTPUT DROP iptables -P FORWARD DROP # Drop invalid iptables -A FORWARD -m state --state INVALID -j DROP # Accept established,related connections iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow ssh through, track connection iptables -A FORWARD -p tcp --syn --dport 22 -m state --state NEW -j ACCEPT

  Read the article

• Formatting pwd/ls for use with scp

  - by eumiro

  I have two terminal windows with bash. One is local on the client computer, another one has an SSH-session on the server. On the server, I am in a directory and seeing a file I would like to copy to my client using scp from the client. On the server I see: user@server:/path$ ls filename filename I can now type scp in the client shell, select and copy the user@server:/path from the server shell and paste to the client shell, then type slash and copy and paste the filename and append a dot to get: user@client:~$ scp user@server:/path/filename . to scp a file from the server to the client. Now I am searching for a command on the server, that would work like this: user@server:/path$ special_ls filename user@server:/path/filename which would give me the complete scp-ready string to copy&paste to the client shell. Something in the form echo $USER@$HOSTNAME:${pwd}/$filename working with relative/absolute paths. Is there any such command/switch combination or do I have to hack it myself? Thank you very much.

  Read the article

• Using mongodump with an auth enabled mongodb server

  - by bb-generation

  I'm trying to do a daily backup of my mongodb server (auth enabled) using the mongodump tool. mongodump provides two parameters to set the credentials: -u [ --username ] arg username -p [ --password ] arg password Unfortunately they don't provide any parameter to read the password from stdin. Therefore everytime I run this command, everyone on the server can read the password (e.g. by using ps aux). The only workaround I have found is stopping the database and directly accessing the database files using the --dbpath parameter. Is there any other solution which allows me to backup the mongodb database without stopping the server and without "publishing" my password? I am using Debian squeeze 6.0.5 amd64 with mongodb 1.4.4-3.

  Read the article

• How do I make a Minecraft kiosk for portable USB drive that boots on most computers

  - by user2044589

  Some time ago, someone referred me to a cool website called Rapid Rollout. It worked fine until I tried to install an OS onto a netbook. To put it short, it didn't work as well as I expected it to. It also didn't install USB flash drives. I'm trying to build a system (or use a service that would create a system) that would open up the Minecraft Launcher (jar) and show it in full-screen with no background. It would also all have to fit into 8 Gigabytes (as this is the most that I can use right now). How can I accomplish this?

  Read the article

• scp -q isn't quiet between different hosts

  - by pythonic metaphor

  So scp -q file host:file and scp -q host:file file are both quiet, i.e. don't give the progress meter. But when I run scp -q host1:file host2:file, I still get the progress meter as well as a Connection to host1 closed. message. The progress meter can be gotten rid of by redirected stdout to /dev/null (although I'd rather not have to), but the connection closed messages comes on stderr, which I definitely want to keep in case there's a real error. How can I make scp quiet? Do I have to run ssh host1 "scp -q file host2:file"?

  Read the article

• Messy Filesytem : Duplicate File Removal from the command line

  - by jrause

  In debian/ubuntu I want to a) create a list of all the files in one directory tree b) do the same for a second directory tree c) compare the two lists such that, only the file NAMES are compared (i.e. just comparing the "file.txt" part so that "/home/folder/file.txt" == "/home/secondfolder/folder/file.txt) d) output a list of all the duplicates can anyone please explain how to do this using scripting languages or regex or something?

  Read the article

• Issue changing mysql password on Debian

  - by Sean

  I installed mysql on my Debian server. I couldn't get into the database because it kept saying I put in the wrong password so I looked on the internet and found that I could log onto mysql using the command sudo mysql --defaults-file=/etc/mysql/debian.cnf From there I went typed use mysql;then mysql> UPDATE user SET password=PASSWORD('password') WHERE user='root'; Which I know switched the password because I typed the command select Host, User, Password from user; And it showed the encrypted characters had changed for all three of the root user categories. But I am still not able to login to mysql using mysql -u root -p

  Read the article

• Determine Location of Inode Usage

  - by Dave Forgac

  I recently installed Munin on a development web server to keep track of system usage. I've noticted that the system's inode usage is climbing by about 7-8% per day even though the disk usage has barely increased at all. I'm guessing something is writing a ton of tiny files but I can't find what / where. I know how to find disk space usage but I can't seem to find a way to summarize inode usage. Is there a good way to determine inode usage by directory so I can locate the source of the usage?

  Read the article

• Is it safe to run Postfix w/o securing it?

  - by Miko

  Does postfix need to be secured before it's safe to run it on a production server? I rely on Monit to notify me if certain processes are down or in trouble. For this purpose and this purpose only, I need postfix on the server so that Monit can send me email notifications. If it's necessary to secure Postfix before deploying it, what are some steps I can take to make it safer?

  Read the article

• How can I run a job when the server load is low?

  - by jberryman

  I have a command that runs a disk snapshot (on EC2, freezing an XFS disk and running an EBS snapshot command), which is set to run on a regular schedule as a cron job. Ideally I would like to be able to have the command delayed for a period of time if the disk is being used heavily at the moment the task is scheduled to run. I'm afraid that using nice/ionice might not have the proper effect, as I would like the script to run with high priority while it is running (i.e. wait for a good time, then finish fast). Thanks.

  Read the article

• xinet vs iptables for port forwarding performance

  - by jamie.mccrindle

  I have a requirement to run a Java based web server on port 80. The options are: Web proxy (apache, nginx etc.) xinet iptables setuid The baseline would be running the app using setuid but I'd prefer not to for security reasons. Apache is too slow and nginx doesn't support keep-alives so new connections are made for every proxied request. xinet is easy to set up but creates a new process for every request which I've seen cause problems in a high performance environment. The last option is port forwarding with iptables but I have no experience of how fast it is. Of course, the ideal solution would be to do this on a dedicated hardware firewall / load balancer but that's not an option at present.

  Read the article

• MTD mtd3ro backup returns BCH decoding failed

  - by saeed144

  While doing a kernel backup of an mtd (Memory Technology Device) from /dev/mtd/mtd3ro of a TI board gives many "BCH decoding failed", Here are system info #cat /proc/mtd dev: size erasesize name mtd0: 00080000 00020000 "X-Loader" mtd1: 00140000 00020000 "U-Boot" mtd2: 000c0000 00020000 "U-Boot Env" mtd3: 00500000 00020000 "Kernel" mtd4: 1f880000 00020000 "File System" here is the method used, dd if=/dev/mtd/mtd3ro of=/data/local/tmp/mtd3.bin doing a cat also returns the same error, and here is the error, BCH decoding failed BCH decoding failed yes, the destination has enough space ;) tell me what do you think? Thanks

  Read the article

• Rails /tmp/cache/assets permissions issue using Debian virtual machine hosted on OS X Lion

  - by Jim

  I am running Parallels Desktop 7 on OS X Lion. I have a VM with Debian installed, and inside that VM I setup a Rails development environment. I am using Parallels Tools to share out my OS X home directory to the VM - the goal here is to run the Rails server on the VM, but host the files on OS X (so they are automatically backed up, and so I can use tools like Textmate to develop with). Everything seems to work with the shared directory - my Debian user can read, write, and execute files. However, when I cloned a recent Rails project from Git, I got an error message when it tried to compile the CSS assets. My symptoms are exactly the same as in the question: http://stackoverflow.com/questions/7556774/rails-sprocket-error-compiling-css-assest-chown-issue I believe this is permissions-based, but it is really weird. My entire Rails project directory has permissions set to 777 and my Debian user owns it. If I navigate into /tmp/cache/assets, those permissions are the same. However, the three-character directories Rails is creating (DCE, DA1, D05, etc...) are being created without write permissions! If I refresh the Rails page a few times, about 4 or 5 (with Rails creating new three-character directories every time), eventually it will create one of the directories with the proper 777 permissions and everything will work! This will persist until I make a change to the CSS files and it has to recompile. Does anyone have any idea what might be going on here? I can't fathom why it is creating temp directories with incorrect permissions, or why after a few refreshes the good permissions kick in and it works... It definitely seems to be an issue with the share, since if I move the project into a different directory on the VM, it seems to work fine. On the OS X side, I've given the shared folder 777 permissions as well, but no dice...any ideas? Update I've found that the number of times I need to refresh before it works is not random - it has to do with how many assets are being compiled. For example, if I edit one of my CSS files, and there are four CSS files in the app/assets/stylesheets directory, I have to refresh four times before the app will finally work without the operation not permitted error...

  Read the article

• www-data is unable to write to an NFS share

  - by Bastian

  On Debian Squeeze, I created an NFS share with these options rw,sync,no_root_squash,no_subtree_check,insecure and on the other Debian Squeeze I can successfully mount it and read write with root, but this share is intended to be used by Apache. I changed the permission to 777 just to make sure. And still, the www-data user can read, create files but not write to them! It does not sound to me like the typical permissions problem, maybe something related to NFS, a lock problem that I am not aware of. Any idea is welcome.

  Read the article

• lshw tells me my processor is a 64 bits but my motherboard has a 32 bits width

  - by bpetit

  Recently I noticed lshw tells me a strange thing. Here is the first part of my lshw output: bpetit-1025c description: Notebook product: 1025C (1025C) vendor: ASUSTeK COMPUTER INC. version: x.x serial: C3OAAS000774 width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=Eee PC... *-core description: Motherboard product: 1025C vendor: ASUSTeK COMPUTER INC. physical id: 0 version: x.xx serial: EeePC-0123456789 slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 1025C.0701 date: 01/06/2012 size: 64KiB capacity: 1984KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd... *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2800 @ 1.86GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 798MHz capacity: 1865MHz width: 64 bits clock: 533MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc ... configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 1066 MHz (0.9 ns) product: SSZ3128M8-EAEEF vendor: Xicor physical id: 1 serial: 00000004 slot: DIMM1 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 798MHz capacity: 798MHz capabilities: ht cpufreq configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical So here I see my processor is effectively a 64 bits one. However, I'm wondering how my motherboard can have a "32 bits width". I've browsed the web to find an answer, without success. I imagine it's just a technical fact that I don't know about. Thanks.

  Read the article

• Package kernel-package has no installation candidate

  - by Am1rr3zA

  Hi, I want to install kernel package by this command sudo apt-get install kernel-package but it gives me the error : Package kernel-package has no installation candidate How can I solve this???

  Read the article

• Using more recent kernel for Xen Dom0 in production.

  - by thelsdj

  Does anyone have experience running Xen dom0 on a more recent kernel than the stock 2.6.18? What host distro are you running? What release of Xen (or hg/git changeset)? What set of patches are you using on kernel source? (Has anyone got the pvops dom0 stuff working in production or is it better to stick with something like the SUSE patches? Any other tips and tricks to running a more recent kernel version as dom0 would be helpful.

  Read the article

• Run application with other user

  - by user62367

  OS: Fedora 14 GUI: GNOME I need to run an application with another user then the "default" (normally used). Purpose: create a ".desktop" file on my desktop to run e.g.: Google Chrome with another user (NOT ROOT! - so beesu doesn't count.) There aren't any gksu, or kdesu packages in Fedora 14. Why? So i want to create a user with "adduser SOMEONE", and i want to run e.g.: Google Chrome with "SOMEONE" - then it will have minimum permissions, "more security". Thank you!

  Read the article

• What's going on with my server? High load, lots of idle CPU time, low disk utilization

  - by Jonathan

  I run a web site and send a legitimate opt-in, daily email newsletter to subscribers. Both the web hosting and email sending are done by the same machine. I have about 100,000 subscribers who have opted in to my daily email newsletter. My PHP script did a pretty good job sending mail to all of them until fairly recently, but as the list has grown I can't keep up. When I run top, I have very high load--usually at least 6 or 7, sometimes as high as 15--even though I only have two CPUs. However, when I run sar, my CPU is idle an average of about 30% of the time. So, it seems I'm not CPU bound. When I run iostat, it seems as though I'm not disk bound because my %util for each device is very low (no more than 5%). Given that I don't seem to be CPU bound or disk bound, why is top reporting such high load? Additionally, since I don't seem to be CPU bound or disk bound, why is my email sending script not able to keep up? Here's what I see when running top: top - 11:33:28 up 74 days, 18:49, 2 users, load average: 7.65, 8.79, 8.28 Tasks: 168 total, 5 running, 162 sleeping, 0 stopped, 1 zombie Cpu(s): 38.9%us, 58.6%sy, 0.8%ni, 0.0%id, 0.7%wa, 0.2%hi, 0.8%si, 0.0%st Mem: 3083012k total, 2144436k used, 938576k free, 281136k buffers Swap: 2048248k total, 39164k used, 2009084k free, 1470412k cached Here's what I see when running iostat -mx: avg-cpu: %user %nice %system %iowait %steal %idle 34.80 1.20 55.24 0.37 0.00 8.38 Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await svctm %util sda 0.19 71.70 1.59 29.45 0.02 0.07 5.90 0.55 17.82 1.16 3.59 sda1 0.00 0.00 0.00 0.00 0.00 0.00 7.10 0.00 13.80 13.72 0.00 sda2 0.05 50.45 1.13 24.57 0.01 0.29 24.25 0.35 13.43 1.15 2.97 sda3 0.05 10.17 0.20 2.33 0.01 0.05 43.75 0.05 20.96 2.45 0.62 sda4 0.00 0.00 0.00 0.00 0.00 0.00 2.00 0.00 70.50 70.50 0.00 sda5 0.07 0.22 0.03 0.07 0.00 0.00 32.84 0.08 856.19 8.03 0.08 sda6 0.02 5.45 0.03 0.72 0.00 0.02 67.55 0.02 26.72 5.26 0.39 sda7 0.00 1.56 0.00 0.42 0.00 0.01 38.04 0.00 8.88 5.84 0.24 sda8 0.01 3.84 0.20 1.35 0.00 0.02 28.55 0.05 31.90 4.08 0.63 Here's what I see when running sar: 09:40:02 AM CPU %user %nice %system %iowait %steal %idle 09:50:01 AM all 30.59 1.01 49.80 0.23 0.00 18.37 10:00:08 AM all 31.73 0.92 51.66 0.13 0.00 15.55 10:10:06 AM all 30.43 0.99 48.94 0.26 0.00 19.38 10:20:01 AM all 29.58 1.00 47.76 0.25 0.00 21.42 10:30:01 AM all 29.37 1.02 47.30 0.18 0.00 22.13 10:40:06 AM all 32.50 1.01 52.94 0.16 0.00 13.39 10:50:01 AM all 30.49 1.00 49.59 0.15 0.00 18.77 11:00:01 AM all 29.43 0.99 47.71 0.17 0.00 21.71 11:10:07 AM all 30.26 0.93 49.48 0.83 0.00 18.50 11:20:02 AM all 29.83 0.81 48.51 1.32 0.00 19.52 11:30:06 AM all 31.18 0.88 51.33 1.15 0.00 15.47 Average: all 26.21 1.15 42.62 0.48 0.00 29.54 Here are the top handful of processes listed at the particular time I happened to run top -c: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 8180 mysql 16 0 57448 19m 2948 S 26.6 0.7 4702:26 /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mysql --pid-file=/var/lib/mysql/bristno.pid --skip-external-locking 26956 brristno 17 0 0 0 0 Z 8.0 0.0 0:00.24 [php] <defunct> 26958 brristno 17 0 94408 43m 37m R 5.0 1.4 0:00.15 /usr/bin/php /home/brristno/public_html/dbv.php 22852 nobody 16 0 9628 2900 1524 S 0.7 0.1 0:00.17 /usr/local/apache/bin/httpd -k start -DSSL 8591 brristno 34 19 96896 13m 6652 S 0.3 0.4 0:29.82 /usr/local/bin/php /home/brristno/bin/mailer.php 1qwqyb6 i0gbor 24469 nobody 16 0 9628 2880 1508 S 0.3 0.1 0:00.08 /usr/local/apache/bin/httpd -k start -DSSL 25495 nobody 15 0 9628 2876 1500 S 0.3 0.1 0:00.06 /usr/local/apache/bin/httpd -k start -DSSL 26149 nobody 15 0 9628 2864 1504 S 0.3 0.1 0:00.04 /usr/local/apache/bin/httpd -k start -DSSL

  Read the article

• Recommendations for a PDF viewer with "web browser"-like navigation.

  - by Tshepang

  Am looking for a PDF reader that can navigate PDF files like a web browser (IE, when I click a link that takes me to another part of the doc, I should be able to go back by pressing Ctrl+left arrow). I am using Debian.

  Read the article

• Cloning OpenVZ container

  - by Tiffany Walker

  I have an OpenVZ container on 1 host and I would like to clone it over to my server. both run SolusVM. I only have root access to my server and would like to host the container on my server now. Can I use rsync to clone the drive while the OS is running on both? Using a command like this: rsync -uazPx --exclude='/boot' --exclude='/proc' --exclude='/dev' --exclude='/lib' --exclude='/tmp' --exclude='/var/lock' / [email protected]:/ Is there any other areas I should probably not copy over?

  Read the article

< Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >