Search Results

Search found 33029 results on 1322 pages for 'access vba'.

Page 409/1322 | < Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >

  • SuperMicro IPMI through OpenBSD PF Firewall

    - by thelsdj
    I'm trying to access a SuperMicro IPMI card that is behind an OpenBSD bridged firewall. A couple pieces of information: The OpenBSD firewall itself has a SuperMicro IPMI that I can access across the internet. The IPMI I'm trying to reach can be reached from behind the firewall. My gateway does arp request the IPMI and it does appear to respond (this is from the external interface of the firewall) 16:57:45.548892 arp who-has ipminame tell gwname 16:57:45.549500 arp reply ipminame is-at ipmimac But when I make a request to the IPMI IP from outside the firewall the external interface of the firewall shows no traffic with the IPMI ip as its destination. Any idea what might be causing this problem? Is there something about IPMI traffic that my gateway wouldn't like (the gateway is provided by my colocation provider so I can't easily debug it).

    Read the article

  • requests are taken to the wrong directory

    - by gidireich
    Hi, I use xampp on windows 7 64, to test locally my php web application I use virtual hosts to have access to my code from different domain names. Now, I created a new version of the code and want to access both versions using different domain names. I added a new virtual host newversion.mysite.local to httpd-vhosts.conf and directed it to the directory of the new version. Also updated the windows hosts file with the line 127.0.0.4 newversion.mysite.local A strange thing happens: when browsing to newversion.mysite.local I'm being taken to the old version, which is located at a different location. How the hell this happens? Please help me with ideas Thank you Gidi

    Read the article

  • Wiping out user and/or root password in embedded linux

    - by TryTryAgain
    We have a security camera system running an embedded linux. It boots with Lilo as a bootloader and has no tty access once booted. I don't know any username either. SSH/22 is open, but I don't think brute force is an option. I have tried all the common tricks to reset a linux user password (boot from the bootloader in single user mode = doesn't happen, still prompts for user login, boot to a live cd = can't access the file system...it's all loop files and other binary, etc etc), but they are all not possible as it is an embedded linux setup the way it is. Any help/suggestions would be appreciated. Thanks

    Read the article

  • WebDAV "PROPFIND" exception in IIS due to network share?

    - by jacko
    Hi all, We're finding continuous exceptions in our event viewer on our live box to the following exception: [snippet] Process information: Process ID: 3916 Process name: w3wp.exe Account name: NT AUTHORITY\NETWORK SERVICE Exception information: Exception type: HttpException Exception message: Path 'PROPFIND' is forbidden. Thread information: Thread ID: 14 Thread account name: OURDOMAIN\Account Is impersonating: True Stack trace: at System.Web.HttpMethodNotAllowedHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Other Specs: Windows Server 2003 R2 & IIS 6.0 We've narrowed it down to occuring when people try to access shares on the box from within the network, and have discovered (we think) that its due to the WebDAV web services extension being previously disabled by past staff. The exceptions are being thrown when trying to access directories that are virtual dirs in IIS, and plain old UNC network shares What the implications for enabling the WebDAV extensions on our live web server? And will this solve our problems with the exceptions in our event log?

    Read the article

  • How to "FTP jail" with Pure-FTPD?

    - by Nate
    I asked this a little bit ago, but instead of specifying Pure-FTPD I just said Apache. Per the answer to that question, I'm asking again with "Pure-FTPD" in the title this time. I need to allow someone access to my VPS via FTP, but there are a number of directories that the person must not be allowed to view or modify. For example, something like this: private_info_1 public_info_1 private_info_2 public_info_2 In this example, the FTP user would need to be allowed to do stuff in the public directories, but not the private ones. How do I go about doing this with Pure-FTPD? I have cPanel and SSH access.

    Read the article

  • How to SSH into Red Hat Linux (virtual box guest) from Windows 7 (host)?

    - by Gary Hunter
    I have RHEL running in Virtual Box and my native OS is Win 7. From a purely educational standpoint, I want to be able to access RHEL from Win 7 over SSH. I download putty but don;t know how to make it do what I want. Ideally, I would like to use the linux command prompt at a minimum and preferably access the GUI apps also. IS this possible? I am just trying to explore and expand my linux knowledge. Thanks for your time. Gary Hunter

    Read the article

  • Stop squid caching 302 and 307 with deny_info

    - by 0xception
    TLDR: 302, 307 and Error pages are being cached. Need to force a refresh of the content. Long version: I've setup a very minimal squid instance running on a gateway which shouldn't not cache ANYTHING but needs to be solely used as a domain based web filter. I'm using another application which redirects un-authenticated users to the proxy which then uses the deny_info option redirects any non-whitelisted request to the login page. After the user has authenticated the firewall rule gets placed so they no longer get sent to the proxy. The problem is that when a user hits a website (xkcd.com) they are unauthenticated so they get redirected via the firewall: iptables -A unknown-user -t nat -p tcp --dport 80 -j REDIRECT --to-port 39135 to the proxy at this point squid redirects the user to the login page using a 302 (i've also tried 307, and i've also make sure the headers are set to no-cache and/or no-store for Cache-Control and Pragma). Then when the user logs into the system they get firewall rule which no longer directs them to the squid proxy. But if they go to xkcd.com again they will have the original redirection page cached and will once again get the login page. Any idea how to force these redirects to NOT be cached by the browser? Perhaps this is a problem w/ the browsers and not squid, but not sure how to get around it. Full squid config below. # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 acl localnet src 192.168.182.0/23 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl https port 443 acl http port 80 acl CONNECT method CONNECT # # Disable Cache # cache deny all via off negative_ttl 0 seconds refresh_all_ims on #error_default_language en # Allow manager access only from localhost http_access allow manager localhost http_access deny manager # Deny access to anything other then http http_access deny !http # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !https visible_hostname gate.ovatn.net # Disable memory pooling memory_pools off # Never use neigh cache objects for cgi-bin scripts hierarchy_stoplist cgi-bin ? # # URL rewrite Test Settings # #acl whitelist dstdomain "/etc/squid/domains-pre.lst" #url_rewrite_program /usr/lib/squid/redirector #url_rewrite_access allow !whitelist #url_rewrite_children 5 startup=0 idle=1 concurrency=0 #http_access allow all # # Deny Info Error Test # acl whitelist dstdomain "/etc/squid/domains-pre.lst" deny_info http://login.domain.com/ whitelist #deny_info ERR_ACCESS_DENIED whitelist http_access deny !whitelist http_access allow whitelist http_port 39135 transparent ## Debug Values access_log /var/log/squid/access-pre.log cache_log /var/log/squid/cache-pre.log # Production Values #access_log /dev/null #cache_log /dev/null # Set PID file pid_filename /var/run/gatekeeper-pre.pid SOLUTION: I believe I might have found a solution to this. After days and days trying to figure it out, only through a random stumble I found client_persistent_connections off server_persistent_connections off This did the trick. So it wasn't so much cache as it was a single persistent connection messing things up. W000T!

    Read the article

  • How can I tell what Apache modules are available to me?

    - by AgentConundrum
    I'm currently reading 'Definitive Guide to Apache mod_rewrite' and throughout the book there are other Apache modules mentioned that are better alternatives in given scenarios. This has got me wondering what all is installed on my site. I don't have SSH access to the server, and I don't have access to any of the config files (afaik). Is there any way for me to determine what is installed, or do I have to directly ask my host? I suppose certain commands could be run inside PHP (i.e. using backticks), but I'm not sure what the limitations of that are. Thanks.

    Read the article

  • UFW blocks SSL connections Varnish/Apache2 on Ubuntu 12.04

    - by user1383815
    I have installed Virtualmin on a Ubuntu 12.04 server and I'm using LAMP stack with Varnish (:80) in front of Apache (:8000). However, I cannot access https when UFW is enabled. When I disable UFW, all works fine. Here is what UFW logging shows when I attempt to access a website via https: Dec 14 05:42:29 localhost kernel: [64491.327263] [UFW BLOCK] IN=eth0 OUT= MAC=e4:11:5b:e5:ef:8c:00:d0:02:8f:f0:00:08:00 SRC=MY_IP_ADDRESS DST=SERVER_IP_ADDRESS LEN=52 TOS=0x00 PREC=0x00 TTL=115 ID=2524 DF PROTO=TCP SPT=56430 DPT=20000 WINDOW=8192 RES=0x00 SYN URGP=0 Here is my UFW ruleset: $ ufw status Status: active To Action From -- ------ ---- 2221 ALLOW Anywhere 10000 ALLOW Anywhere 80 ALLOW Anywhere 21 ALLOW Anywhere 8000 ALLOW Anywhere Apache Secure ALLOW Anywhere 2221 ALLOW Anywhere (v6) 10000 ALLOW Anywhere (v6) 80 ALLOW Anywhere (v6) 21 ALLOW Anywhere (v6) 8000 ALLOW Anywhere (v6) Apache Secure (v6) ALLOW Anywhere (v6) Does anyone have any pointers how to fix this problem? Thank you for your time.

    Read the article

  • Apache/Jboss Issue - is this connection timeout?

    - by user115391
    We have an application. The architecture is as below 1 load balancer (apache), which redirects to 2 app servers (jboss). The site is working fine and I am able to access it fine. But sometimes, randomly the homepage takes a while (like 30-40 secs) to load. I tried checking the logs but could not figure out why. I used the httptraffic analyzer, fiddler to see the traffic, but it just says the request/response took 30 secs or so. I checked the apache access logs, mod_jk.log. My configurations are below mod-jk.conf LoadModule jk_module modules/mod_jk.so JkWorkersFile conf/workers.properties JkLogFile logs/mod_jk.log #JkLogLevel info #JkLogLevel debug JkLogLevel error # Select the log format JkLogStampFormat "[%a %b %d %H:%M:%S %Y]" JkOptions +ForwardKeySize +ForwardURICompatUnparsed -ForwardDirectories JkRequestLogFormat "%w %V %T %P %{tid}P %D" JkMount /__application__/* loadbalancer JkUnMount /__application__/images/* loadbalancer <VirtualHost *:8080 > JkMountFile conf/uriworkermap.properties </VirtualHost> JkShmFile run/jk.shm <Location /jkstatus> JkMount status Order deny,allow Deny from all Allow from 127.0.0.1 </Location> ----------------------------- uriworkermap.properties Simple worker configuration file # Mount the Servlet context to the ajp13 worker /=loadbalancer /*=loadbalancer ----------------------------- workers.properties worker.list=loadbalancer,status worker.template.port=8009 worker.template.type=ajp13 worker.template.lbfactor=1 worker.template.prepost_timeout=10000 worker.template.connect_timeout=10000 worker.template.ping_mode=A worker.worker1.reference=worker.template worker.worker1.host=hostname1 worker.worker2.reference=worker.template worker.worker2.host=hostname2 worker.loadbalancer.type=lb worker.loadbalancer.balance_workers=worker1,worker2 worker.status.type=status ----------------------------- my jboss server.xml - $JBOSS_HOME/server/default/deploy/jbossweb.sar/server.xml --------------------------------- The logs from access log is below The issue where it took time - look at the seconds column [23/Mar/2012:12:10:38 -0400] "GET / HTTP/1.1" 200 138 x.x.x.x - - [23/Mar/2012:12:10:49 -0400] "GET /index.jsp HTTP/1.1" 302 - x.x.x.x - - [23/Mar/2012:12:11:10 -0400] "GET /home.jsp HTTP/1.1" 200 936 x.x.x.x - - [23/Mar/2012:12:11:31 -0400] "POST /login/ HTTP/1.1" 200 8895 x.x.x.x - - [23/Mar/2012:12:11:52 -0400] "GET /login/includes/login-style.css HTTP/1.1" 304 - The one after the issue x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET / HTTP/1.1" 200 138 x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET /index.jsp HTTP/1.1" 302 - x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET /home.jsp HTTP/1.1" 200 936 x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "POST /login/ HTTP/1.1" 200 8895 x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET /login/includes/login-style.css HTTP/1.1" 304 - Would it be a cache or timeout issue? Any help is appreciated. Thanks.

    Read the article

  • Managing Active Directory Group Membership with a Non-Administrator Account In Server 2008

    - by Laranostz
    I am running Server 2008 R2 in an Active Directory Domain Environment. I have created a group in Active Directory and I have delegated management authority to that group to a user. I want this user to be able to add and remove accounts as needed from that group so that they are exercising some measurement of control without giving them other authority. When I have the user attempt to access the Active Directory Users & Computers Console it prompts them for Administrator credentials. They are using Remote Desktop to access the server, because they do not have Windows 7, and firewall rules prevent using the Remote Management Kit. I do not want to provide them with any level of Administrative rights except the minimum required for them to add/remove users from this group. There are two servers that 'talk' to each other in this isolated environment, a domain controller and a member server, both are only reachable through RDP. Any suggestions?

    Read the article

  • How do I built a DIY NAS?

    - by Kaushik Gopal
    I'm looking for good, detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I would like to know: What hardware I need to built one What kind of hard-drive setup I should take (like RAID) Or any other relevant hardware related advices (power supply, motherboard etc...) What software I should run on it, both what OS and software to manage the contents effectively So the NAS is recognizable and accessible to my network I can make sure my Windows computers will recognize it (when using Linux distro's) I can access my files from outside my network I already did a fair bit of searching and found these links, but while these links are great they delve more on the hardware side. I'm looking for more instructions in the software side. Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device

    Read the article

  • Why do I get "Permission denied (publickey)" when trying to SSH from local Ubuntu to a Amazon EC2 server?

    - by Vorleak Chy
    I have an instance of an application running in the cloud on Amazon EC2 instance, and I need to connect it from my local Ubuntu. It works fine on one of local ubuntu and also laptop. I got message "Permission denied (publickey)" when trying to access SSH to EC2 on another local Ubuntu. It's so strange to me. I'm thinking some sort of problems with security settings on the Amazon EC2 which has limited IPs access to one instance or certificate may need to regenerate. Does anyone know a solution?

    Read the article

  • AppUpdater and wamp server

    - by Gerbrand
    I've got an winforms application and I want to implement auto updater to this application. I followed the instructions on the site and got everything setup right. (appupdater application) Now I tried a test and I'm getting the following error back from the appupdater: the remote server returned an error 405 I googled this and this is because my server isn't setup with the right access. I'm using a wampserver and in the apache httpd.conf I added the following lines so my directory is allowed for access: <Directory "c:/wamp/www/updater/V11/"> Options Indexes FollowSymLinks AllowOverride all # onlineoffline tag - don't remove Order Deny,Allow Deny from all Allow from 127.0.0.1 </Directory> But I'm still getting the same error back. I can find information for the IIS configurations, but not for apache. edit: I'm still getting the error, I opened the error log file of apache and I see the following - "PROPFIND /updater/V11/ HTTP/1.1" 405 238 the updater component is using the HTTP-DAV. edit2: it seems that nobody had this kind of situation.

    Read the article

  • Single sign-on for intranet?

    - by Jason Swett
    I'm trying to set up a single sign-on for my intranet. I've found a couple solutions online but I'm not sure if they apply to my particular situation. I have several subdomains on the same server. One level of user should be able to access all subdomains and another level of user should only be able to access some subdomains. Signing into one subdomain should make it so you don't have to log into any others. Can anyone point me in the right direction? I'm on Ubuntu using Apache.

    Read the article

  • Detecting man-in-the-middle attacks?

    - by Ilari Kajaste
    There seem to be many possible ways to create man-in-the-middle attacks on public access points, by stealing the access point's local IP address with ARP spoofing. The possible attacks range from forging password request fields, to changing HTTPS connections to HTTP, and even the recently discovered possibilit of injecting malicious headers in the beginning of secure TLS connections. However, it seems to be claimed that these attacks are not very common. It would be interesting to see for myself. What ways are there to detect if such an attack is being attempted by someone on the network? I guess getting served a plain HTTP login page would be an obvious clue, and of course you could run Wireshark and keep reading all the interesting ARP traffic... But an automated solution would be a tiny bit more handy. Something that analyzes stuff on the background and alerts if an attack is detected on the network. It would be interesting to see for myself if these attack are actually going on somewhere.

    Read the article

  • Deploying web services on a RHEL 5 box using Apache/Tomcat/Axis/Java.

    - by Deepak Konidena
    Hi, I am new to the Web services scene. I currently have access to a RHEL5 box and i need to deploy a java web service on it. It runs apache and i know this because i have a website hosted on this machine. Now, i want to deploy a web service on to this website to be able to just pass a link to someone when they need to access my web service. Could someone point out a resource or explain what all i need to get the webservice deployed using Tomcat/Apache Axis and Java. I have done this on Windows (hosted on localhost) but couldn't quite figure out things on linux. Any help is greatly appreciated. Thanks. Deepak.

    Read the article

  • Connect to internet through DC with 2 network interfaces

    - by Ali Foroughi
    I have a network like this : Client 1 <== Wireless ==> Access Point <== Wire ==> DC <== Wireless ==> ADSL Modem Client 1 : IP : 192.168.1.181 DG : 192.168.1.100 DNS : 192.168.1.100 Access Point : IP : 192.168.1.10 DG : 192.168.1.100 DC : IP : 192.168.1.100 DG : 192.168.1.1 DNS : 127.0.0.1 ADSL Modem : IP : 192.168.1.1 I can ping yahoo.com from client1, but cannot browse the internet. UPDATE1 : my DC has two network interfaces that I bridge together. UPDATE2 : I powered down the DC firewall UPDATE3 : I set a forwarder for my DC to 8.8.8.8 (Google dns)

    Read the article

  • PFSENSE and IPV6 , direct connect rules

    - by Bgnt44
    My question is about pfsense configuration for ipv6 In theory Ipv6 are fully routable even in a LAN For stating point i ve Using this tutorial : http://doc.pfsense.org/index.php/Using_IPv6_on_2.1_with_a_Tunnel_Broker So my Lan network has ipv4 connection and ipv6 I would like to be able to access my LAN machines by their IPV6 i'm confused with firewall rules which i need to set to be able to do that Even if i set all interfaces to pass all packets, i'm not able to directly access any machine by their IPV6 Did i miss something ? Edit : Ok i found that it work now, think it has always work but my isp seems to support ipv6 sometimes and sometimes not ... weird

    Read the article

  • securing source code with bitlocker

    - by Daniel Powell
    We need to deploy a web based application at a client site where it will be within their local intranet. Part of our requirement is to provide some basic security to protect our IP. I realise that nothings a 100% guaranteed fix but we are just looking to make it a bit harder for most people. The server will be running server 2008 and I was considering using bitlocker as a cheap and nasty way to protect it. From what I understand assuming the mobo supports it we can use the Transparent bitlocker mode and this means that moving the hdd to another pc will mean the hdd will be unreadable in that machine baring some sort of cold boot attack to steal the encryption keys. Is this assumption correct and in the case that the motherboard or any other component fails in the pc and we need to replace it do we lose access to our data or is there a way to unencrypt it (obviously accessible to only our company) EDIT: we do have legal documents that cover this and we will be locking the pc physically and the client will not have access to the pc (windows login) other than via the website we host on it

    Read the article

  • Missing eth0 configuration file

    - by Godric Seer
    I have two servers both running Scientific Linux 6 on the same network. Since I want SSH access to both of them, I want to give them both static IPs so I can setup port forwarding and not worry how my router assigns local IPs. I found that I need to edit the configuration file /etc/network-scripts/ifcng-eth0, however that file does not exist. The network card works fine, and I am able to ssh as long as I access the router and find the local ip. Can I simply make my own configuration file, or did I miss some step in configuring the system that I need to complete?

    Read the article

  • Mikrotik and NAT/Routing issue

    - by arul
    I have basic NAT/Routing problem with Mikrotik RB750 that I've been unable to solve over the past days. From our ISP we have 26 IP addresses: 10.10.10.192/27, with 10.10.10.193 being the gateway and 10.10.10.194 the first available IP. What I need is that everything connected to ether2 gets a public IP from the DHCP server, and everything connected to ether3 gets a local IP from another DHCP (192.168.100.0/24). All clients should have internet access (I'll figure out bandwidth throttling later) and optimally just 'see' each other (all boxes are Win7, I guess this can ultimately be handled with VPN). Here is my setup: ether1 (10.10.10.194) is connected directly to ISP. 20 clients connected to ether2(10.10.10.195), and another 20 to ether3(10.10.10.196) (both through same 24 port switches). This is my setup, which doesn't work, all 20 clients from ether2 can access the internet, though all comm. seems to come from 10.10.10.194 (is this due to the masquerade on ether1?), and ether3 can't access the internet at all. I think that I need to masquerade ether3, and SNAT/DNAT or NETMAP ether2, but that doesn't work either, I guess that I need to somehow 'wire' both ether2+3 to ether1. Address list: # ADDRESS NETWORK INTERFACE 0 ;;; public 10.10.10.194/32 10.10.10.192 ether1-gateway 1 ;;; inner DHCP 192.168.100.0/24 192.168.100.0 ether3-private 2 ;;; public 10.10.10.195/32 10.10.10.192 ether2-pub 3 ;;; public 10.10.10.196/32 10.10.10.192 ether3-private NAT 0 ;;; ether3 nat chain=srcnat action=src-nat to-addresses=10.10.10.196 src-address=192.168.100.0/24 out-interface=ether3-private 1 ;;; ether3 nat chain=dstnat action=dst-nat to-addresses=192.168.100.0/24 in-interface=ether3-private 2 ;;; ether1 masquerade chain=srcnat action=masquerade to-addresses=10.10.10.194 out-interface=ether1-gateway Routes: # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S 0.0.0.0/0 ether1-gateway 1 2 A S 10.10.10.192/27 10.10.10.195 ether2-pub 1 3 ADC 10.10.10.192/32 10.10.10.195 ether2-pub 0 ether1-gateway ether3-private 4 ADC 192.168.100.0/24 192.168.100.0 ether3-private 0 IP Pools: # NAME RANGES 0 public-pool 10.10.10.201-10.10.10.220 1 private-pool 192.168.100.2-192.168.100.254 DHCP configs: # NAME INTERFACE RELAY ADDRESS-POOL LEASE-TIME ADD-ARP 0 public-dhcp ether2-pub public-pool 3d 1 private-dhcp ether3-private private-pool 3d Thanks!

    Read the article

  • Import exponetial fixed width format data into Excel

    - by Tom Daniel
    I've received a bunch of text data files consiting of Lots of records (30K/file) of 3 fields each of 5-place numbers in exponential format: s0.nnnnnEsee (where s is +/-, n is a digit and ee is the exponent (always 2 digit). When I open the file in Notepad, the format is perfectly uniform throughout each file, but when I import it to Excel using Data|Import|Fixed Width, many of the data values get messed up, no matter what format (text, exponential, various custom tries) I assign to the cells. Looking at the Notepad version, it appears that leading + signs were replaced with a space in the data file, but the sign of the exponential is always there. This means that some fields begin with a space, and this appears to confuse the Excel import routine. I get the same result in Excel 2003 and 2007. I'm sure there's a straightforward solution (hopefully without a messy VBA routine), but I can't figure out what to try next. :-) To clarify (hopefully), here are some input records and the corresponding text input to Excel: Notepad Excel -0.11311E+01 0.10431E-04 0.27018E-03 -0.11311E 1.0431E-05 2.7018E-04 0.19608E+00-0.81414E-02-0.89553E-02 0.19608E -8.1414E-03 8.9553E-03 etc. Whoopee! Solved my own problem - in the spirit of Jeopardy, now that I've begun the question, here's the answer - Use a different "File Origin" - several other than the default "Unicode UTF..." work fine! What a pain. Hope this helps somebody else avoid a few unpleasant hours! Aloha from Kona, Tom

    Read the article

  • Setup asp.net mvc application as subdomain website

    - by a_m0d
    I'm trying to setup a local application on a subdomain on our company server. There is already an installation of sharepoint running on http://companyweb/, but I would like my application to run on http://orders.companyweb/. I tried creating a new website, leaving the IP address the same as it is for http://companyweb, and just changing the host header value to orders.companyweb. However, no matter where I try to access the site from (different computers around the network, including the server itself), I keep getting 404 errors. I then tried setting up a simple index.html and serving that up as the highest priority; however, I still got 404 errors. This makes me think that I have actually setup the site itself wrong. What should I change to be able to access this application correctly on all the local computers?

    Read the article

  • Share the DVB card on windows 7

    - by Bashar Kernel
    I have 2 computers connected to a router and I have a DVB card in one of them. I want to use the one DVB card to feed both of them. I read about it and I know that I want to share the DVB adapter with the Internet Connection Sharing on the LAN network. But when I use the connection sharing, I lose my internet access I tried to use "Bridge Connection", but then I also lost my internet access too. Can any one tell me how to fix this problem? And how to view the channels (for example how to use the VLC)?

    Read the article

< Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >