Search Results

Search found 30742 results on 1230 pages for 'folder size'.

Page 409/1230 | < Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >

  • Creating a bootable flash without overlayfs

    - by Septagram
    I want to create an USB stick to carry my Ubuntu everywhere around with me. It's not intended to spread Ubuntu by installing it everywhere, but rather for running my configured system on any computer I come across. So far, I went with installing Ubuntu with unetbootin, however, I have some issues with this. When installed with netbootin, the original disk image is kept intact on the flash drive, forever. Also, a file is created for persistent storage and during boot it is accessed together with the image by overlayfs. This, in my opinion, has the following problems: If system is updated regularly, then files from the image are overwritten in persistent storage, doubling their size and wasting precious space. Persistent storage has a fixed size that you have to define from the start, again, wasting precious space. I'm not 100% sure, but maybe using overlayfs makes disk access slower, and more so on the relatively slow devices. So I'd like to find another solution: either to get rid of the original image or to install Ubuntu "normally" on the separate ext2 partition, or maybe even install it in the main vfat partition on the USB stick. Suggestions?

    Read the article

  • Too many heap subpools might break the upgrade

    - by Mike Dietrich
    Recently one of our new upcoming Oracle Database 11.2 reference customers did upgrade their production database - a huge EBS system - from Oracle 9.2.0.8 to Oracle Database 11.2.0.2. They've tested very well, we've optimized the upgrade process, the recompilation timings etc.  But once the live upgrade was done it did fail in the JAVA component piece with this error: begin if initjvmaux.startstep('CREATE_JAVA_SYSTEM') then * ORA-29553: classw in use: SYS.javax/mail/folder ORA-06512: at "SYS.INITJVMAUX", line 23 ORA-06512: at line 5 Support diagnosis was pretty quick - and refered to:Bug 10165223 - ORA-29553: class in use: sys.javax/mail/folder during database upgrade But how could this happen? Actually I don't know as we have used the same init.ora setup on test and production. The only difference: the prod system has more CPUs and RAM. Anyway, the bug names as workarounds to either decrease the SGA to less than 1GB or decrease the number of heap subpools to 1. Finally this query did help to diagnose the number of heap subpools: select count(distinct kghluidx) num_subpools from x$kghlu where kghlushrpool = 1; The result was 2 - so we did run the upgrade now with this parameter set: _kghdsidx_count=1 And finally it did work well. One sad thing:After the upgrade did fail Support did recommend to restore the whole database - which took an additional 3-4 hours. As the ORACLE SERVER component has been already upgraded successfully at the stage where the error did happen it would have been fine to go on with the manual upgrade and start catupgrd.sql script. It would have been detected that the ORACLE SERVER is upgraded already and just picked up the non-upgraded components. The good news:Finally I had one extra slide to add to our workshop presentation

    Read the article

  • EPM Patch Set Updates - May 2014

    - by Paul Anderson -Oracle
    .PSU_DocID { font-family: Arial, Helvetica, sans-serif; font-size: 9px; font-style: normal; } .PSU_PatchID { font-family: Arial, Helvetica, sans-serif; font-size: 11px; font-style: normal; } The following is Enterprise Performance Management (EPM) Patch Set Updates (PSU) released last month (May 2014).  The "Patch" ID links will access the patch directly for download from "My Oracle Support" (login required). Oracle Hyperion 11.1.2.3.x Hyperion Essbase Studio Server 11.1.2.3.501 - Patch 18505506 Hyperion Essbase Studio Console MSI 11.1.2.3.501 - Patch 18505503 Oracle Hyperion Profitability and Cost Management 11.1.2.3.501 - Patch 18685108 Hyperion Strategic Finance 11.1.2.3.501 - Patch 18400594 Hyperion Essbase Admin Services Server 11.1.2.3.501 - Patch 18505475 Hyperion Essbase Admin Services Console MSI 11.1.2.3.501 - Patch 18505468 Hyperion Essbase RTC 11.1.2.3.501 - Patch 18505499 Hyperion Essbase Server 11.1.2.3.501 - Patch 18505489 Hyperion Essbase Client 11.1.2.3.501 - Patch 18505494 Hyperion Essbase Client MSI 11.1.2.3.501 - Patch 18505483 Hyperion Analytic Provider Services 11.1.2.3.501 - Patch 18505515 Oracle Hyperion 11.1.2.2.x Hyperion Financial Management 11.1.2.2.307 - Patch 18490422 NOTE: Some patches listed may have been released a few days outside of the stated month. To view the patches released over previous months visit the earlier Blog posts: April 2014 EPM PSU Released March 2014 EPM PSU Released February 2014 EPM PSU Released January 2014 EPM PSU Released For the latest Enterprise Performance Management Patch Set Updates visit: Oracle Hyperion EPM Products [Doc ID 1400559.1] Be sure to review the related Readme files available per Patch Set Update.

    Read the article

  • Windows 7 Green Load Bar Stuck and never finish loading,

    - by Levan
    Here is my issues, which i am currently having, in my windows 7, When i go to one specific folder, .Please take a look, This is not my file, but just to get an idea, there is 10 file max no more than 500 MB, i am not able to remove it, or cut it, or move it, it starts that green bar loading and never finish, The problem is, after getting into this folder, my SONY VAIO starts, overheating and if i did not restart, nothing can stop it to be cool down . I have reinstalled windows 2 weeks ago, i don't think this should be issue regarding it. Please, help me what the hell i should do with this GREEN BAR< to stop this headache,

    Read the article

  • 'server was unable to allocate from the system nonpaged pool' error

    - by cop1152
    Currently users at my company are unable to access their home folder (or any folder on our domain controller). I am working remotely and cant physically access the machine until tomorrow morning, but I can access it with RDC. When I attempt to ping other machines on our network from the machine in question (connected with RDC), I immediately get the error PING: transmit failed. error code 1450. Event Viewer is full of 2019 errors: The server was unable to allocate from the system nonpaged pool because the pool was empty Does anyone have experience with this specific issue? I have found some info with Google, but would like to hear what the pros at SF have top say. This is a Windows 2000 server.

    Read the article

  • MVC Scaffold Template Not Generating?

    - by monkey9987
    Been working on an MVC project and my templates were not generating. I first created my Model inside my "Models" folder, then did a quick compile. Next I went to the Views folder to get it created, right click and say "Add View" then I clicked the checkbox to create an edit page. What happened was the template would never seem to pull in my Model, it would just have the default header items, but the entire model was missing.  My model was defined as follows: public class LogOnModel { [Required][Display(Name = "User name")]public string UserName;[Required][DataType(DataType.Password)][Display(Name = "Password")]public string Password;[Display(Name = "Remember me?")]public bool RememberMe; } See anything wrong with that? I couldn't figure out why each time I created my View and selected the option to create the "Edit" scaffold automatically, it would come up blank. Turns out I'm missing my get / set methods on the Model class items. Here's my code with the correct setup: public class LogOnModel { [Required][Display(Name = "User name")]public string UserName { get; set; } [Required][DataType(DataType.Password)][Display(Name = "Password")]public string Password { get; set; }[Display(Name = "Remember me?")]public bool RememberMe { get; set; } }  I hope that helps someone out, it's pretty simple when I look at it now, but that's always the case!  ~ Steve

    Read the article

  • Accessing local files through an http:// address

    - by RexE
    I would like to access a folder of mp3 files on my local Windows machine through http:// addresses. For example, typing http://localhost:9999/songs/test.mp3 into my browser would play test.mp3, which sits in a specified folder on my C: drive. What is the very simplest way to do this? (Background: a program I'm using wants me to enter the URLs of these files, but assumes they are remote and accessed over http. It doesn't accept URLs of the form file://C/Users.... So, I'd like to give these local files addresses that makes them "look" remote.)

    Read the article

  • opening Dbf files in oracle 10g

    - by nagaraju
    This nagaraju,from India,Hyderabad. I have installed oracle 10g trail version in my system(E drive),created one database with my name(database:-nagaraju),in that created tables, prodecures ,functions ,sequences etc for my project. Due to some sudden problem,i formatted my machine C drive,now iam not ablle to open my database, i need all procedures ,tables which i created in that. Now I newly installed oracle10g again in another folder,how can i copy my old database into my inew installation database. Or can i copy the script of procedures so that ican run in new database. I have all data in Oradata folder,like DBF files etc. Could you please help me, how to do that?

    Read the article

  • Can't get powershell to return where results from GCI using ACL

    - by Rossaluss
    I'm trying to get Powershell to list files in a directory that are older than a certain date and match a certain user. I've got the below script so far which gives me all the files older than a certain date and lists the directory and who owns them: $date=get-date $age=$date.AddDays(-30) ls '\\server\share\folder' -File -Recurse | ` where {$_.lastwritetime -lt "$age"} | ` select-object $_.fullname,{(Get-ACL $_.FullName).Owner} | ` ft -AutoSize However, when I try and use an additional where parameter to select only files owned by a certain user, I get no results at all, even though I know I should, based on the match I'm trying to obtain (as below): $date=get-date $age=$date.AddDays(-30) ls '\\server\share\folder' -File -Recurse | ` where ({$_.lastwritetime -lt "$age"} -and {{(get-acl $_.FullName).owner} -eq "domain\user"}) | ` select-object $_.fullname,{(Get-ACL $_.FullName).Owner} | ` ft -AutoSize Am I missing something? Can I not use the get-acl command in a where condition as I've tried to? Any help would be appreciated. Thanks

    Read the article

  • Ubuntu 12.04 Server: permissions on /var/www for newly copied files

    - by Abe
    I ran the following commands to set up ACL on the /var/www folder in my Ubuntu 12.04 Server: sudo usermod -g www-data abe sudo chown -R www-data:www-data /var/www sudo chmod -R 775 /var/www I downloaded Wordpress using wget in my /var/www folder and unzipped the downloaded file: cd /var/www wget http://wordpress.org/latest.zip mv latest.zip wordpress.zip unzip wordpress.zip I created a new database and user in mysql and attempted to run the setup process through the web interface. When I enter the configuration info in wordpress I run into the following error message: Sorry, but I can't write the wp-config.php file. When I run ls -la, I see that the files are owned by my user abe, but they are part of the group www-data. Would I have to run the chmod command every time I copy new files to /var/www? sudo chmod -R 775 /var/www

    Read the article

  • Should you create a class within a method?

    - by Amndeep7
    I have made a program using Java that is an implementation of this project: http://nifty.stanford.edu/2009/stone-random-art/sml/index.html. Essentially, you create a mathematical expression and, using the pixel coordinate as input, make a picture. After I initially implemented this in serial, I then implemented it in parallel due to the fact that if the picture size is too large or if the mathematical expression is too complex (especially considering the fact that I made the expression recursively), it takes a really long time. During this process, I realized that I needed two classes which implemented the Runnable interface as I had to put in parameters for the run method, which you aren't allowed to do directly. One of these classes ended up being a medium sized static inner class (not large enough to make an independent class file for it though). The other though, just needed a few parameters to determine some indexes and the size of the for loop that I was making run in parallel - here it is: class DataConversionRunnable implements Runnable { int jj, kk, w; DataConversionRunnable(int column, int matrix, int wid) { jj = column; kk = matrix; w = wid; } public void run() { for(int i = 0; i < w; i++) colorvals[kk][jj][i] = (int) ((raw[kk][jj][i] + 1.0) * 255 / 2.0); increaseCounter(); } } My question is should I make it a static inner class or can I just create it in a method? What is the general programming convention followed in this case?

    Read the article

  • Bootable SD card still has small memory, even after formating

    - by Inazuma
    I have an SD card which I used to run my RaspberryPi. I wanted to update the copy of raspbian on it, so I formated the card using the software from www.sdcard.com. I followed all the instructions correctly, however the size of my SD card didn't go back to it's default. It is a 4gb SD card, which after it's spell in the RaspberryPi had shrunken to 52mb, which I understand is normal. After formatting, the size rose to 3.69gb. This means that there is not enough space to install a new OS, so how can I make my SD card 4gb again? Any help would be much appreciated!

    Read the article

  • How to make this CSS design of words in headings look clean and well desinged? [closed]

    - by kacalapy
    I am trying to get the lipstick on the pig and not wearing my UI developer hat often is making this impossible. Can someone give me nice alternatives to the code below. this is what i have now. <style> .FirstLetter:first-letter{font-family: arial; font-size: 14pt; font-weight: bold;color:White; background:Blue; border:1px black solid; padding-top:8px; padding-left:8px; padding-bottom:3px;} .Spaced{letter-spacing: 5px;font-family: arial; font-size: 14pt; font-weight: bold;} </style> <div class="FirstLetter Spaced headerFont"> Executive Summary </div> Here is the ugly result of the above code- i am lookign to make the header section look better ONLY that's where the first letter is blue:

    Read the article

  • Check if folders exist in Git repository... testing if a sub-string exists in bash with NULL as a separator

    - by Craig Francis
    I have a common git "post-receive" script for several projects, and it needs to perform different actions if an /app/ or /public/ folder exists in the root. Using: FOLDERS=`git ls-tree -d --name-only -z master`; I can see the directory listing, and I would like to use the RegExp support in bash to run something like: if [[ "$FOLDERS" =~ app ]]; then ... fi But that won't work if there was something like an "app lication" folder... I specified the "-z" option in the git "ls-tree" command so I could use the \0 (null) character as a separator, but not sure how to test for that in the bash RegExp. Likewise I know there is support for specifying a particular path in the ls-tree command, and could then pipe that to "wc -l", but I'd have thought it was quicker to get a full directory listing of the root (not recursive) then test for the 2 (or more) folders with the returned output. Possibly related to: http://stackoverflow.com/questions/7938094/git-how-to-check-which-files-exist-and-their-content-in-a-shared-bare-repos

    Read the article

  • Preserving name when bulk unzipping files?

    - by Elip
    Sorry this question is trivial, but I couldn't get it to work: I have a folder full of .zip files, each .zip file contains exactly one .xml file. The zip files have sensible names like a.zip etc., while the .xml file contained in them have some "randomname".xml Now I want to unpack all the .zip files in the folder, preserving the name of the .zip files, so that a.zip gets unpacked into a.xml, b.zip into b.xml etc... I only managed to achieve a batch unpacking with the command: for z in *.zip; do unzip "$z"; done How do I enhance this to keep the names?

    Read the article

  • Various problems with software raid1 array built with Samsung 840 Pro SSDs

    - by Andy B
    I am bringing to ServerFault a problem that is tormenting me for 6+ months. I have a CentOS 6 (64bit) server with an md software raid-1 array with 2 x Samsung 840 Pro SSDs (512GB). Problems: Serious write speed problems: root [~]# time dd if=arch.tar.gz of=test4 bs=2M oflag=sync 146+1 records in 146+1 records out 307191761 bytes (307 MB) copied, 23.6788 s, 13.0 MB/s real 0m23.680s user 0m0.000s sys 0m0.932s When doing the above (or any other larger copy) the load spikes to unbelievable values (even over 100) going up from ~ 1. When doing the above I've also noticed very weird iostat results: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 1589.50 0.00 54.00 0.00 13148.00 243.48 0.60 11.17 0.46 2.50 sdb 0.00 1627.50 0.00 16.50 0.00 9524.00 577.21 144.25 1439.33 60.61 100.00 md1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 0.00 1602.00 0.00 12816.00 8.00 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 And it keeps it this way until it actually writes the file to the device (out from swap/cache/memory). The problem is that the second SSD in the array has svctm and await roughly 100 times larger than the second. For some reason the wear is different between the 2 members of the array root [~]# smartctl --attributes /dev/sda | grep -i wear 177 Wear_Leveling_Count 0x0013 094% 094 000 Pre-fail Always - 180 root [~]# smartctl --attributes /dev/sdb | grep -i wear 177 Wear_Leveling_Count 0x0013 070% 070 000 Pre-fail Always - 1005 The first SSD has a wear of 6% while the second SSD has a wear of 30%!! It's like the second SSD in the array works at least 5 times as hard as the first one as proven by the first iteration of iostat (the averages since reboot): Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 10.44 51.06 790.39 125.41 8803.98 1633.11 11.40 0.33 0.37 0.06 5.64 sdb 9.53 58.35 322.37 118.11 4835.59 1633.11 14.69 0.33 0.76 0.29 12.97 md1 0.00 0.00 1.88 1.33 15.07 10.68 8.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 1109.02 173.12 10881.59 1620.39 9.75 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.41 0.01 3.10 0.02 7.42 0.00 0.00 0.00 0.00 What I've tried: I've updated the firmware to DXM05B0Q (following reports of dramatic improvements for 840Ps after this update). I have looked for "hard resetting link" in dmesg to check for cable/backplane issues but nothing. I have checked the alignment and I believe they are aligned correctly (1MB boundary, listing below) I have checked /proc/mdstat and the array is Optimal (second listing below). root [~]# fdisk -ul /dev/sda Disk /dev/sda: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00026d59 Device Boot Start End Blocks Id System /dev/sda1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sda2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sda3 4605952 814106623 404750336 fd Linux raid autodetect root [~]# fdisk -ul /dev/sdb Disk /dev/sdb: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dede Device Boot Start End Blocks Id System /dev/sdb1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sdb2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sdb3 4605952 814106623 404750336 fd Linux raid autodetect /proc/mdstat root # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb2[1] sda2[0] 204736 blocks super 1.0 [2/2] [UU] md2 : active raid1 sdb3[1] sda3[0] 404750144 blocks super 1.0 [2/2] [UU] md1 : active raid1 sdb1[1] sda1[0] 2096064 blocks super 1.1 [2/2] [UU] unused devices: Running a read test with hdparm root [~]# hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 664 MB in 3.00 seconds = 221.33 MB/sec root [~]# hdparm -t /dev/sdb /dev/sdb: Timing buffered disk reads: 288 MB in 3.01 seconds = 95.77 MB/sec But look what happens if I add --direct root [~]# hdparm --direct -t /dev/sda /dev/sda: Timing O_DIRECT disk reads: 788 MB in 3.01 seconds = 262.08 MB/sec root [~]# hdparm --direct -t /dev/sdb /dev/sdb: Timing O_DIRECT disk reads: 534 MB in 3.02 seconds = 176.90 MB/sec Both tests increase but /dev/sdb doubles while /dev/sda increases maybe 20%. I just don't know what to make of this. As suggested by Mr. Wagner I've done another read test with dd this time and it confirms the hdparm test: root [/home2]# dd if=/dev/sda of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 38.0855 s, 282 MB/s root [/home2]# dd if=/dev/sdb of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 115.24 s, 93.2 MB/s So sda is 3 times faster than sdb. Or maybe sdb is doing also something else besides what sda does. Is there some way to find out if sdb is doing more than what sda does? UPDATE Again, as suggested by Mr. Wagner, I have swapped the 2 SSDs. And as he thought it would happen, the problem moved from sdb to sda. So I guess I'll RMA one of the SSDs. I wonder if the cage might be problematic. What is wrong with this array? Please help!

    Read the article

  • Deleting Unused Swaps Partions

    - by Nikita Kononov
    Good evening everyone , I got a little issue with Swap Partitions. Due to some issues after installing Ubuntu first time, I reinstalled it and now I have 3 Swaps. Here is sudo fdisk -l result Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xaa9693fe Device Boot Start End Blocks Id System /dev/sda1 2048 52430847 26214400 1c Hidden W95 FAT32 (LBA) /dev/sda2 * 52430848 540677076 244123114+ 7 HPFS/NTFS/exFAT /dev/sda3 540678142 1465147391 462234625 5 Extended Partition 3 does not start on physical sector boundary. /dev/sda5 1452750848 1465147391 6198272 82 Linux swap / Solaris /dev/sda6 1440352256 1452742655 6195200 82 Linux swap / Solaris /dev/sda7 540678144 1427951615 443636736 83 Linux /dev/sda8 1427953664 1440339967 6193152 82 Linux swap / Solaris So Swaps in /dev/sda5 and /dev/sda6 are no longer in use as far as I understand and thus I was planning to delete them, however faced a problem. What I did is download and burn Gparted Live CD and boot it up, tried to delete those partitions but I have no idea how to add 12GB unallocated memory to the existing OS partition in this case to /dev/sda7 Is there anyway I can delete 2 swaps and extend unallocated memory to /dev/sda7 partion? Thank you in advance!

    Read the article

  • I need to access another user's files.

    - by CDeanMartin
    My system is an HP netbook running Ubuntu 10 netbook edition from a USB drive. I created an admin account and user account, and left in place the 'ubuntu' account. My netbook came with Windows 7 factory loaded and I did some work in Windows before setting up Linux. I copied my work into the HP Tools FAT32 partition that also came Factory Loaded, and was only 20% full. Only the 'ubuntu' account shows the HP Tools partition. So I would like to either view the partition from the 'admin' or 'user' accounts, or copy files from the partition-to a folder accessible from admin or user. I have already tried right clicking the folder, selecting share, and installing the share package, but I got a string of errors and would prefer a short term, one time solution that does not involve installing the share package. All I need is a few plain text Windows files i was working on.

    Read the article

  • System speakers not recognized

    - by Kyle Maxwell
    Since upgrading to Xubuntu 13.10, sound has not functioned properly (e.g. screeching when playing Skype notifications). Now, however, it does not function at all. pavucontrol only shows Dummy Output and does not recognize the built-in speakers on my Dell Precision M4600. Possibly related, the sound indicator applet does not come up when I click on it, only showing a small white bar underneath it. I have purged and reinstalled pulseaudio. lspci -v shows: 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) Subsystem: Dell Precision M4600 Flags: bus master, fast devsel, latency 0, IRQ 56 Memory at f2560000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 14a3 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f0080000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel The "Capabilities: <access denied" line makes me wonder if there's a permissions issue, as the Log Out applet now shows "Restart" and "Shutdown" grayed out. groups shows me in: kmaxwell adm dialout cdrom sudo dip plugdev fuse lpadmin netdev sambashare vboxusers

    Read the article

  • Should I cache the data or hit the database?

    - by JD01
    I have not worked with any caching mechanisms and was wondering what my options are in the .net world for the following scenario. We basically have a a REST Service where the user passes an ID of a Category (think folder) and this category may have lots of sub categories and each of the sub categories could have 1000 of media containers (think file reference objects) which contain information about a file that may be on a NAS or SAN server (files are videos in this case). The relationship between these categories is stored in a database together with some permission rules and meta data about the sub categories. So from a UI perspective we have a lazy loaded tree control which is driven by the user by clicking on each sub folder (think of Windows explorer). Once they come to a URL of the video file, they then can watch the video. The number of users could grow into the 1000s and the sub categories and videos could be in the 10000s as the system grows. The question is should we carry on the way it is currently working where each request hits the database or should we think about caching the data? We are on using IIS 6/7 and Asp.net.

    Read the article

  • Is there a way to bundle pdf tiles to a Kindle friendly file?

    - by Maciej Swic
    I'm downloading PDF approach plates from Navigraph, and i have a folder per airport with files named after their corresponding approach / departure etc. Now I'd like to take such a folder with a bunch of PDF files, automatically generate an index and combine them to a single .mobi file that i can send to my Kindle. The index created can be very simple and consist of the file name (without the extension). Tapping an index item should jump to the correct page for that chart. I know there is a host of apps that combine comic book jpg's to ebooks, but is there anything that does the above please?

    Read the article

  • Troubleshooting a crash with Windows 7

    - by AngryHacker
    I have a folder with several thousand videos (All .MPG extensions). When I open the folder with these videos, it shows up fine, but as I start scrolling down, it crashes the Windows Explorer. In the Event Viewer, I see this: Faulting application name: Explorer.EXE, version: 6.1.7600.16450, time stamp: 0x4aebab8d Faulting module name: ntdll.dll, version: 6.1.7600.16559, time stamp: 0x4ba9b802 Exception code: 0xc0000374 Fault offset: 0x00000000000c6df2 Faulting process id: 0x954 Faulting application start time: 0x01cbb1b71edf3b51 Faulting application path: C:\Windows\Explorer.EXE Faulting module path: C:\Windows\SYSTEM32\ntdll.dll Report Id: ee987372-1dc4-11e0-8e06-406186ea9135 I suspect that one of the videos has bad metadata. I removed the Length column and it was still crashing. I then removed the Date column and the problem disappeared. How do I go about troubleshooting this problem or at least identifying the file that's causing the issue.

    Read the article

  • FFmpeg creates emtpy (black) frames

    - by resamsel
    I have a set of images from a timelapse shot (172 JPG files) that I want to convert into a movie. I tried several parameters with FFmpeg, but all I get is a video with black frames (though it has the expected length). ffmpeg -f image2 -vcodec mjpeg -y -i img_%03d.jpg timelapse2.mpg The command above creates this video: http://sdm-net.org/data/timelapse2.mpg What I'm expecting is something like this (created with Time Lapse Assembler.app): https://vimeo.com/39038362 - This is my fallback option, but I'd really like to create timelapse movies from a script. I'm on OSX Lion (10.7.3) with FFmpeg version (0.10) installed via Homebrew. I also tried to find a proper version of mencoder for OSX, but this doesn't seem to be an easy task. Also, ImageMagick's convert doesn't seem to work nicely, it creates really bad output and it seems there's not much I can do about it... Edit: With libx264 and an mp4 container: ffmpeg -f image2 -y -i img_%03d.jpg -vcodec libx264 timelapse4.mp4 Output: ffmpeg version 0.10 Copyright (c) 2000-2012 the FFmpeg developers built on Mar 26 2012 13:47:02 with clang 3.0 (tags/Apple/clang-211.12) configuration: --prefix=/usr/local/Cellar/ffmpeg/0.10 --enable-shared --enable-gpl --enable-version3 --enable-nonfree --enable-hardcoded-tables --enable-libfreetype --cc=/usr/bin/clang --enable-libx264 --enable-libfaac --enable-libmp3lame --enable-librtmp --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libxvid --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libass --disable-ffplay libavutil 51. 34.101 / 51. 34.101 libavcodec 53. 60.100 / 53. 60.100 libavformat 53. 31.100 / 53. 31.100 libavdevice 53. 4.100 / 53. 4.100 libavfilter 2. 60.100 / 2. 60.100 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 6.100 / 0. 6.100 libpostproc 52. 0.100 / 52. 0.100 Input #0, image2, from 'img_%03d.jpg': Duration: 00:00:06.88, start: 0.000000, bitrate: N/A Stream #0:0: Video: mjpeg, yuvj420p, 3888x2592 [SAR 72:72 DAR 3:2], 25 fps, 25 tbr, 25 tbn, 25 tbc [buffer @ 0x7f8ec9415f20] w:3888 h:2592 pixfmt:yuvj420p tb:1/1000000 sar:72/72 sws_param: [libx264 @ 0x7f8ec981d800] using SAR=1/1 [libx264 @ 0x7f8ec981d800] frame MB size (243x162) > level limit (36864) [libx264 @ 0x7f8ec981d800] MB rate (984150) > level limit (983040) [libx264 @ 0x7f8ec981d800] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 AVX [libx264 @ 0x7f8ec981d800] profile High, level 5.1 [libx264 @ 0x7f8ec981d800] 264 - core 120 - H.264/MPEG-4 AVC codec - Copyleft 2003-2011 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'timelapse4.mp4': Metadata: encoder : Lavf53.31.100 Stream #0:0: Video: h264 (![0][0][0] / 0x0021), yuvj420p, 3888x2592 [SAR 72:72 DAR 3:2], q=-1--1, 25 tbn, 25 tbc Stream mapping: Stream #0:0 -> #0:0 (mjpeg -> libx264) Press [q] to stop, [?] for help frame= 172 fps= 18 q=-1.0 Lsize= 259kB time=00:00:06.80 bitrate= 312.3kbits/s video:256kB audio:0kB global headers:0kB muxing overhead 1.089647% [libx264 @ 0x7f8ec981d800] frame I:1 Avg QP: 9.60 size:212820 [libx264 @ 0x7f8ec981d800] frame P:43 Avg QP:30.50 size: 291 [libx264 @ 0x7f8ec981d800] frame B:128 Avg QP:31.00 size: 285 [libx264 @ 0x7f8ec981d800] consecutive B-frames: 0.6% 0.0% 1.7% 97.7% [libx264 @ 0x7f8ec981d800] mb I I16..4: 22.5% 77.2% 0.3% [libx264 @ 0x7f8ec981d800] mb P I16..4: 0.0% 0.0% 0.0% P16..4: 0.0% 0.0% 0.0% 0.0% 0.0% skip:100.0% [libx264 @ 0x7f8ec981d800] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 0.0% 0.0% 0.0% direct: 0.0% skip:100.0% L0: 1.2% L1:98.8% BI: 0.0% [libx264 @ 0x7f8ec981d800] 8x8 transform intra:77.2% inter:100.0% [libx264 @ 0x7f8ec981d800] coded y,uvDC,uvAC intra: 41.2% 23.4% 0.6% inter: 0.0% 0.0% 0.0% [libx264 @ 0x7f8ec981d800] i16 v,h,dc,p: 40% 25% 35% 1% [libx264 @ 0x7f8ec981d800] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 36% 32% 30% 1% 0% 0% 0% 0% 0% [libx264 @ 0x7f8ec981d800] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 51% 40% 6% 1% 1% 0% 1% 0% 1% [libx264 @ 0x7f8ec981d800] i8c dc,h,v,p: 60% 21% 19% 0% [libx264 @ 0x7f8ec981d800] Weighted P-Frames: Y:0.0% UV:0.0% [libx264 @ 0x7f8ec981d800] ref P L0: 92.3% 0.0% 0.0% 7.7% [libx264 @ 0x7f8ec981d800] ref B L0: 50.0% 0.0% 50.0% [libx264 @ 0x7f8ec981d800] ref B L1: 99.4% 0.6% [libx264 @ 0x7f8ec981d800] kb/s:304.49 Output timelapse4.mp4 (beacause of spam protection I can only post two links with my reputation): http sdm-net.org/data/timelapse4.mp4

    Read the article

  • There is not enough space on the disk when there is?

    - by Lee Tickett
    Permissions are fine (inherited) and checking effective permissions everything is AOK. As you can see i can make a file in the docs folder but not the pdf_docs subfolder. The folder has a lot of files and is quite large- i wonder if i've reached a limit? I couldn't find anything on google. Size: 51.0 GB (54,819,804,885 bytes) Size on disk: 52.0 GB (55,925,719,040) Contains 554,697 Files EDIT I've just checked and i can delete files... and for every file i delete i appear to be able to create a new one. This definitely points toward a limit in terms of number of files?

    Read the article

  • Grub does not show a Windows 8 option after dual boot

    - by skytreader
    So, I've successfully dual-booted my Windows 8 machine with Ubuntu 12.04 . However, I still don't have a convenient method of choosing what OS to load at boot time. After installing Ubuntu, my computer still loads Windows 8 directly. I then added grubx64.efi to the white list of my boot loader. But after that, my machine loads Ubuntu directly without even a shadow of GRUB showing up! I used boot-repair and I got this paste.ubuntu URL: paste.ubuntu.com/1326074. After running boot-repair (and re-white listing the grubx64.efi file), GRUB now shows up but without any Windows 8 option! Lastly, I ran sudo fdisk -l and it gave me this: WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x6396389f Device Boot Start End Blocks Id System /dev/sda1 1 1465149167 732574583+ ee GPT Partition 1 does not start on physical sector boundary. I'm guessing my problem has something to do with the warning from fdisk above but I don't know what to do with it. How do I proceed now?

    Read the article

< Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >