Search Results

Search found 12398 results on 496 pages for 'in memory oltp'.

Page 409/496 | < Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >

• Computer won't go into standby

  - by Robert

  When I select Start-Turn off computer-Standby the 'turn off computer' option window closes, and then nothing else happens. I can start new applications, and Windows acts like I never selected standby. I ran it for several hours after that. If I have a TV program scheduled to record when I select standby I get a window (the Pinnacle TV software) asking if I'm sure, there are programs scheduled to record - and the computer just keeps running after I select yes, never going into standby. I added that detail as it shows the standby process is starting. [This problem also happens if a TV program is not scheduled, so the scheduler task in not running/in memory. This problem happens regardless of whether I'm not watching TV. This problem happens regardless of whether Media Center is running (it usually isn't, I'm using Pinnacle to watch TV).] I looked at "How to troubleshoot hibernation and standby issues in Windows XP" http://support.microsoft.com/kb/907477 - ACPI is enabled, and "standby" is an option in "Power Options Properties." So it appears to be setup correctly. Windows XP SP3 Media Center Edition, all current updates installed.

  Read the article

• Debian/Ubuntu - No network connection

  - by leviathanus

  I have a very weird situation on my Ubuntu 12.04 LTS Server. I can not access (ping) my gateway, although I believe my config is ok - I attach the outputs. Any hints where to look? (I changed the beginning of the IP to something different, just obfuscation) ping 5.9.10.129 PING 5.9.10.129 (5.9.10.129) 56(84) bytes of data. From 5.9.10.129 (5.9.10.129) icmp_seq=2 Destination Host Unreachable From 5.9.10.129 (5.9.10.129) icmp_seq=3 Destination Host Unreachable From 5.9.10.129 (5.9.10.129) icmp_seq=4 Destination Host Unreachable uname -r 3.2.0-29-generic ifconfig eth0 eth0 Link encap:Ethernet HWaddr 3c:97:0e:0e:54:d7 inet addr:5.9.10.142 Bcast:5.9.10.159 Mask:255.255.255.224 inet6 addr: fe80::8e70:5aff:feda:c4ac/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1216 errors:0 dropped:0 overruns:0 frame:0 TX packets:490 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107470 (107.4 KB) TX bytes:34344 (34.3 KB) Interrupt:17 Memory:d2500000-d2520000 ip route default via 5.9.10.129 dev eth0 metric 100 5.9.10.128/27 via 5.9.10.129 dev eth0 5.9.10.128/27 dev eth0 proto kernel scope link src 5.9.10.142 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 5.9.10.129 0.0.0.0 UG 1000 0 0 eth0 5.9.10.128 5.9.10.129 255.255.255.224 UG 0 0 0 eth0 5.9.10.128 0.0.0.0 255.255.255.224 U 0 0 0 eth0 iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination UPD: Eric, this is how routing information looks on a working server: 0.0.0.0 78.47.198.49 0.0.0.0 UG 100 0 0 eth0 78.47.198.48 78.47.198.49 255.255.255.240 UG 0 0 0 eth0 78.47.198.48 0.0.0.0 255.255.255.240 U 0 0 0 eth0 As I understand it, Hetzner tries to ensure security by this, so I can not take over an IP by changing my MAC. But this is another server, which has another netmask (255.255.255.240) UPD2: BatchyX, on the working server: 78.47.198.49 dev eth0 src 78.47.198.60 cache on the broken: 5.9.10.129 dev eth0 src 5.9.10.142 cache

  Read the article

• Tomcat Solr times out

  - by user568458

  (Plesk 10.4 centos 5.8 linux apache2 server, with Tomcat5 on port 8080 and Apache Solr) I get "The connection has timed out" on requesting domain.com:8080 or www.domain.com:8080 or ip.ad.dr.ess:8080 Every reason I can find why this might be seems not to be the case: Plesk thinks Tomcat is running fine and lists it as an active service. The firewall currently has an accept all rule on port 8080. There's nothing relevant in the catalina tomcat logs (/var/log/tomcat5) - just some stuff from last time tomcat was started. There's no record at all of the requests that fail. netstat -lnp | grep 8080 gives the following, which I beleive means Tomcat is listening to requests to port 8080 on all ip addresses from any ip and any port (please correct me if I'm wrong): : tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 4018/java This covers every cause of this time out that I can find - so I must be missing something fundamental. It seems Tomcat is running, listening to the right port, is getting an appropriate IP address, is not obstructed by a firewall and is not failing after receiving a request in a way which would be recorded in the logs (so I believe it can't be out of memory, or anything like that). I'm all out of ideas on how to continue debugging this. I must have overlooked something obvious. Can anyone help?

  Read the article

• Website has become slower on a VPS, was much fast on a shared host. What's wrong?

  - by Arpit Tambi

  My shared host suspended my website stating system overload, so I moved my website to a VPS which has 4GB RAM. But for some reason the website has become very slow. This is the vmstat output - procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 1 0 0 3050500 0 0 0 0 0 1 0 0 0 0 100 0 0 Here's the Apache Benchmark output for a STATIC html page I ran on the server itself - Benchmarking www.ask-oracle.com (be patient)...apr_poll: The timeout specified has expired (70007) Total of 20 requests completed Update: Server Config: List item Centos 5.6 4 cores cpu 4 GB RAM LAMP stack with APC Wordpress Only one website It takes almost double time to load now, same website was much fast on shared hosting. I know I need to tweak some settings but have no clue where to start from? I have already tried to optimize apache, mysql etc. Update 2: CPU usage is low, see uptime output: 11:09:02 up 7 days, 21:26, 1 user, load average: 0.09, 0.11, 0.09 Update 3: When I load any webpage, browser shows "Waiting" for a long time and then page loads quickly. So I suspect server can accept only limited connections and holds extra connections in a waiting state. How to check this? Update 4: Following is the output on executing netperf TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to localhost.localdomain (127.0.0.1) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 9615.40 [root@ip-118-139-177-244 j3ngn5ri6r01t3]# Here are the Apache MPM settings from httpd.conf, do they look okay? <IfModule worker.c> StartServers 5 MaxClients 100 MinSpareThreads 50 MaxSpareThreads 250 ThreadsPerChild 125 MaxRequestsPerChild 10000 ServerLimit 100 </IfModule>

  Read the article

• Lenovo S10 Ideapad will not boot while original hard drive is installed, neither from hard drive or

  - by aki

  Hello, first time posting here so I'll try to be very clear. I have a Lenovo S10 Ideapad netbook which fails to boot to an OS. It shows the Lenovo splash screen and can get to the BIOS but it doesn't get to GRUB (was dual booting Ubuntu 9.10 and Win 7, was working fine for months, ie this isn't a new dual boot gone bad). After the splash screen it displays a flashing cursor in the upper left corner. Power cycled to no avail. Here is what I have done trying to narrow the problem down: The machine will boot to Ubuntu using an install/live USB drive, but only if ANOTHER hard drive is installed or NO hard drive is installed. The boot order always lists USB first. Also, there is a 2 gb RAM upgrade but I think that's fine; the Ubuntu USB drive boots fine with it, and "free" sees the whole 2gb of memory. So it seems like the hard drive is bad. I was able to put the bad drive in a different laptop and mount it to recover files. I'm ready to replace the bad hard drive, but I would like to know if this situation makes any sense. If the hard drive is bad, shouldn't I still be able to boot with the Ubuntu USB drive while the bad drive is installed? I would have expected the machine to boot into Ubuntu anyway even if with a bad drive, since the boot order lists USB first. But it seems that when the bad drive is installed, the machine ignores the USB drive and hangs with the flashing cursor. Thanks for any ideas! Sorry for the long post, I just want to put all the info I have up front! Basically I'm going to buy a new drive, but I am mostly curious if this is a typical or at least not unusual situation.

  Read the article

• Hugepages not utilized by MySQL 5.0, CentOS 5

  - by TechZilla

  I've set up Hugepages, but i'm not seeing any of them reserved. Have I missed a step, or for some particular reason, is MySQL is unable to utilize the Hugepages? I have not created a mount of hugetlbfs, although from what I read, MySQL would not call pages in such a manner. If I'm wrong, please let me know, as that would be a trivial solution. Almost all my MySQL tables are using InnoDB. NOTE: I created a hugetlbfs, no change as expected. Is it possible that rebooting would rectify this situation? I would not want to go through the procedure, as this is high availability, but would do so if necessary. This is the configurations, which I believe are relevant. /etc/sysctl.conf ... ## Huge Pages vm.nr_hugepages = 4096 vm.hugetlb_shm_group = 27 ## SHM kernel.shmmax = 34359738368 kernel.shmall = 8589934592 ... /etc/security/limits.conf ... mysql soft nofile 12888 mysql hard nofile 51552 @mysql soft memlock unlimited @mysql hard memlock unlimited /etc/my.cnf [mysqld] large-pages ... grep Huge /proc/meminfo HugePages_Total: 4096 HugePages_Free: 4096 HugePages_Rsvd: 0 Hugepagesize: 2048 kB id mysql uid=27(mysql) gid=27(mysql) groups=27(mysql) context=root:system_r:unconfined_t:SystemLow-SystemHigh tail -6 /var/log/mysqld.log InnoDB: HugeTLB: Warning: Failed to allocate 1342193664 bytes. errno 12 InnoDB HugeTLB: Warning: Using conventional memory pool 120808 15:49:25 InnoDB: Started; log sequence number 0 1729804158 120808 15:49:25 [Note] /usr/libexec/mysqld: ready for connections. Version: '5.0.95' socket: '/var/lib/mysql/mysql.sock' port: 3306 Source distribution I would really appreciate any help, I'm completely out of ideas. If I missed any more relevant configs, or diagnostics, please comment and I'll add it to the question.

  Read the article

• Windows 7 task bar stuck in hiding, how to fix?

  - by Rainer Blome

  In Windows 7, I use the "Auto-hide the task bar" feature. Usually, it works fine: As soon as the pointer touches the screen bottom, the task bar pops up. However sometimes, it refuses to rise. Pressing the "Windows" key (or Ctrl-ESC) makes the start menu appear, forcing the task bar from hinding as well. Once I've done this, the task-bar auto-rises again. This is annoying, it interrupts flow. Has anyone else noticed this? How do I avoid this? Searching for "Windows 7 task bar auto-raise" shows that at least one other person experienced this problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/how-can-i-fix-the-taskbars-auto-hide/8cdf6369-7354-4d29-9249-b7096ed0e28b?msgId=6dac3361-9d0f-4a9e-8642-b91a72826ba4 To answer the question posed by the "helpful" support engineer on the above page, of course I am running some apps when this happens, usually Explorer, Firefox, Eclipse, Cygwin/X, Xterm, Emacs, Notes, VPN client, Firewall. If my memory serves correctly, I have seen this behavior on earlier versions of Windows as well, XP at least. To reproduce this behavior, I tried switching between apps, and bringing apps to open other windows. I am unable to reproduce this behavior so far. So far, it appears to happen out of the blue, sometimes multiple times a day. Looks like a bug to me. The task bar should raise no matter what.

  Read the article

• Dell PowerEdge 860 won't boot but gets power

  - by fierflash

  I have a Dell PowerEdge 860. Got an 2008 R2 running on it. Here is the scenario I'm currently in: I can boot it up and work as usuall. But when I restart it, it just shuts down, doesn't reboot, and it won't boot up again. Then it stays in this "mode", On/off button blinking green(standby mode?) and System Indicator LED blinking amber. If I try to press the On/Off button on the frontpanel it won't boot. It's like you can hear the fan from the PSU running but nothing else is trying to boot. If I unplug the powercable and then put it back in again it's the same, the extremley noisy fans won't start and it's just sitting there. If I let it "rest" for like 1 to 24 hours while the powercable is unplugged and I plug it in again, it boots directly, without me having to push the On/Off button. What I have tried: Run diagnostics(not the one in POST phase) and everything is fine Booting without any cables except the powercable Boot without memory installed Boot without the raidcable plugged in Cleared NVRAM Reseated all the components and cables Googling like a freak for any possible solution Tried Dell Support but I don't have any warranty left so they can't help me unless i pay some ridiculous amount of money I suppos Do anyone have some experience with the same issue? Do I need to replace something or is there any other way to determine the problem? Any help will be greatly appreciated.

  Read the article

• Virtual Fileserver

  - by Sergei

  Hi, We are planning to move our production servers to the datacenter and virtualize remaining servers in the process.Datacenter will have HP blades with vSphere on top.Currentliy we are using Celerra NS20 as fileserver.Since datacenter is using HP kit and EVA 4400 as SAN, we cannot have Celerra there, as EMC supoprt for Celerra does not work for non EMC array. I have searched for possible options and one of them was to have HP NAS blade X3800sb instead of Celerra.However this seems like overkill for me.We are only using Celerra for about 100 users and 50 servers and I think having X3800sb could be waste of resources. The other option would be to have a virtual fileserver as a part of vmware environment in datacenter.We only need CIFS to be provided.The only option I can think of is Windows Storage server.We had a bad expirience with Windows servers used as fileservers ( memory leaks one thing) in the past and this was one of the reasons we moved to Celerra. What are the other options?We need something as reliable as Celerra with as many options as possible.For example , Celerra has per folder quotas, deduplication, dynamic volume allocation, automatic failover, VTLU, replication. Also we would need to replicate NAS data to the failover site.We could use block level replication , SAN-to-SAN, but this would mean wasted bandwidth, as we need only subset of folders to be replicated.We used CA XSoft for windows servers in the past and Celerra has option for Celerra replication. Thank you very much in advance, Please ask me if I missed any details!

  Read the article

• Tomcat6 getting crashed at regular intervals installed in Ubuntu

  - by Milesh Rout

  I have installed Tomcat6 in Ubuntu OS and when I run my web application the server gets crashed at regular intervals. I have tried a lot but not getting the solution. I have increased the memory upto 2048mb but still getting such error. Following is the error I am getting. Any help would be really appreciated. org.apache.tomcat.util.http.Parameters processParametersINFO: Invalid chunk starting at byte [312] and ending at byte [312] with a value of [null] ignoredException in thread "Timer-1" Exception in thread "com.mchange.v2.async.ThreadPoolAsynchronousRunner$PoolThread-#0" Exception in thread "com.mchange.v2.async.ThreadPoolAsynchronousRunner$PoolThread-#2" Exception in thread "com.mchange.v2.async.ThreadPoolAsynchronousRunner$PoolThread-#1" Exception in thread "Timer-2" Exception in thread "http-8080-4" Exception in thread "http-8080-8" Exception in thread "http-8080-17" Exception in thread "org.hibernate.cache.StandardQueryCache.data" Exception in thread "org.hibernate.cache.UpdateTimestampsCache.data" Exception in thread "org.hibernate.cache.StandardQueryCache.data" Exception in thread "org.hibernate.cache.StandardQueryCache.data" Exception in thread "org.hibernate.cache.UpdateTimestampsCache.data" Exception in thread "org.hibernate.cache.StandardQueryCache.data" Exception in thread "org.hibernate.cache.StandardQueryCache.data" Exception in thread "org.hibernate.cache.UpdateTimestampsCache.data" Exception in thread "com.safenet.usermgmt.User.data" Exception in thread "http-8080-7" Exception in thread "http-8080-12" Exception in thread "http-8080-16" Exception in thread "http-8080-14" Exception in thread "http-8080-13" Exception in thread "http-8080-15" Exception in thread "http-8080-6" OpenJDK Client VM warning: Exception java.lang.OutOfMemoryError occurred dispatching signal SIGTERM to handler- the VM may need to be forcibly terminated

  Read the article

• No clue for high load average on top

  - by Oz.

  We have several machines on Amazon (ec2) of the type c1.xlarge with 16 cpus, running the Amazon AMI. Details on the machine: 7 GB of memory 20 EC2 Compute Units (8 virtual cores with 2.5 EC2 Compute Units each) 1690 GB of instance storage 64-bit platform I/O Performance: High API name: c1.xlarge One out of the several machines is showing a high load average, since we have run the last yum upgrade a couple of weeks a go. We did not yet update the other machines, and everything looks normal on them. The strange thing is that the top command not showing any hint for the cause of the load. CPUs are 4.8%us, 1.1%sy, 0.0%ni, 94.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st(see below). Mem is about 1.5GB free. Any idea what could it be, or where else can we check? Many thanks for the help. # # top # top - 07:57:42 up 4:18, 1 user, load average: 1.36, 1.45, 1.47 Tasks: 131 total, 1 running, 130 sleeping, 0 stopped, 0 zombie Cpu(s): 4.8%us, 1.1%sy, 0.0%ni, 94.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 7120092k total, 5644920k used, 1475172k free, 532888k buffers Swap: 0k total, 0k used, 0k free, 3463936k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1557 mysql 20 0 1829m 374m 6448 S 14.3 5.4 11:15.09 mysqld 6655 apache 20 0 416m 49m 3744 S 9.3 0.7 0:04.85 httpd 27683 apache 20 0 421m 54m 3708 S 9.0 0.8 0:00.99 httpd 6682 apache 20 0 424m 57m 3788 S 8.3 0.8 0:03.81 httpd 16816 apache 20 0 419m 51m 3760 S 4.3 0.7 0:04.09 httpd 22182 apache 20 0 417m 50m 3756 S 1.7 0.7 0:06.34 httpd 219 root 20 0 0 0 0 S 0.3 0.0 0:00.34 kworker/7:1 699 root 20 0 0 0 0 S 0.3 0.0 0:00.40 kworker/3:1 1 root 20 0 19376 1508 1212 S 0.0 0.0 0:00.29 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:00.71 ksoftirqd/0

  Read the article

• Can you transfer a Windows 7 XP-mode VHD to a new PC without the need for reactivation?

  - by Henk

  Hi. At the moment I am running Vista 32 bit and use VPC 2007 a lot. I have several W2000 VMs set up with complex software configurations. For me, one of the advantages of working with VPCs is that a VM can easily be copied to another PC (like a notebook). Also, when I move to a new PC, I can immediately work with my existing VMs without the need to reinstall all applications. I am thinking about buying a new pc with Windows 7 64 bit pro, and using the xp-mode VM that comes with Windows 7. The advantages would be support for more memory (so being able to run more VM's simultaneously) and having a licenced XP VM. I would like to know if you can transfer a VHD that is based on the xp-mode VHD to another machine without Activation issues. The other machine will of course, also be running W7. I would guess that this would not be a problem. However, I did read about a guy who had to reinstall his W7 because of a harddisk failure, and could not access his xp-mode VHD anymore because it demanded re-activation. Thanks. Henk.

  Read the article

• Stop the constant random reboots of my GIGABYTE GA-B75M-D3V

  - by Frederic

  I've got some issues with a new system. It's rebooting constantly. The system consists of a: brand new: Gigabyte GA-B75M-D3V with F9 BIOS (latest) Intel Core i5-3470 Ivy Bridge 2x 8GB G.SKILL Ripjaws 1600MHz memory (mem-tested x-86) coming from a stable system: Creative Soundcard X-FI Titanium Asus Radeon HD4850 OCZ Vertex 3 120G SSD Sata 3 Hard disk 1TB Sata 2 ASUS Blu-ray Drive PSU 400w Connected peripherals : Toshiba tv (displayport on dvi of MB or HD4850) Wired mouse, wireless keyboard (logitech) Bluetooth usb key Azio main problem : it's not possible to read the errors from the MB. nothing on the manual neither on internet. At the beginning, I received a MB with graphic problems and the problem of rebooting. I RMA'd it. The new one doesn't have any graphic problems. but it's still constantly rebooting. I removed everything except the HD, the sound-card, the blu-ray drive and the wireless keyboard. It's still unexpectdly rebooting. I'm running a test with just the motherboard and the HD. I will update this text after the test. I've got some questions : Somebody have an idea of a test? The PSU could cause that problem? I used it a lot of years with the stable system. Update 1: BTW, if anyone has the same problem, the manual won't say it but you'll need to reset the bios between two tests (the screwdriver on the two pins) if you suspect a problem of compatibility .

  Read the article

• TFTP Timing Out on Ubuntu VM

  - by valsidalv

  I'm running a Windows 7 PC with VMware installed which has my Ubuntu (10.04 Lucid Lynx). I recently installed a DHCP server and TFTP (Xinet tftpd) using these instructions. I've mapped a network drive so that my Windows has access to all the files in my VM through a 192.x.x.x IP address. I'm trying to throw some custom firmware onto a router. The router has its own built-in TFTP utility that will download the image. It successfully manages to do everything but it is slow because it writes it to flash memory. There is another method that is much quicker because it writes to RAM directly but it must use the TFTP server in Ubuntu. The issue I'm facing is that the Ubuntu TFTP transfer seems to be timing out. The transfer starts but never goes past ~60%. Here's my /etc/xinetd.d/tftp file (similar to a known working config): service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = -s /home/user/tftp/ disable = no cps = 300 2 per_source = 60 } I've done some searching but can't find any parameters for this file to control timeout time or number of retries. The last two arguments (cps, per_source) and completely alien to me (can anyone explain). I have a few possible solutions but the easiest would be to get this TFTP server working. Can anyone help? Either with a timeout configuration or maybe even recommend a different TFTP server? Thanks!

  Read the article

• Excel fails to open Python-generated CSV files

  - by johnjdc

  I have many Python scripts that output CSV files. It is occasionally convenient to open these files in Excel. After installing OS X Mavericks, Excel no longer opens these files properly: Excel doesn't parse the files and it duplicates the rows of the file until it runs out of memory. Specifically, when Excel attempts to open the file, a prompt appears that reads: "File not loaded completely." Example of code I'm using to generate the CSV files: import csv with open('csv_test.csv', 'wb') as f: writer = csv.writer(f) writer.writerow([1,2,3]) writer.writerow([4,5,6]) Even the simple file generated by the above code fails to load properly in Excel. However, if I open the CSV file in a text editor and copy/paste the text into Excel, parse it with text to columns, and then save as CSV from Excel, then I can reopen the CSV file in Excel without issue. Do I need to pass an additional parameter in my scripts to make Excel parse the CSV files the same way it used to? Or is there some setting I can change in OS X Mavericks or Excel? Thanks.

  Read the article

• SQL Server 2008 Bring Database Online trying to open a file from a drive that doesn't exist

  - by Nai

  This is my error I am facing TITLE: Microsoft.SqlServer.Smo Set offline failed for Database 'Go3D_Retailer ------------------------------ ADDITIONAL INFORMATION: An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) Unable to open the physical file "E:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\ftrow_Go3D_catalog.ndf". Operating system error 2: "2(failed to retrieve text for this error. Reason: 15105)". Database 'Go3D_Retailer' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. ALTER DATABASE statement failed. (Microsoft SQL Server, Error: 5120) Background to this error I've been trying to move my destination logshipping database to another physical server for analysis purposes. Because I do not have domain keys and active directory set up, I had to hack my process by using the same username/password for both the source and destination servers to get the process to work. Following that, I used this guy's solution to move the destination database to another server. However, this error occurs when I try to bring the database back online. I don't have an E drive on my server and I have no idea why it's trying to open a file from E drive. I have over a 100gb left on my hard disk so it's definitely not a space issue. This sounds like a bug... Any ideas?

  Read the article

• Diagnosing Microsoft SQL Server error 9001: The log for the database is not available.

  - by Scott Mitchell

  Over the weekend a website I run stopped functioning, recording the following error in the Event Viewer each time a request is made to the website: Event ID: 9001 The log for database 'database name' is not available. Check the event log for related error messages. Resolve any errors and restart the database. The website is hosted on a dedicated server, so I am able to RDP into the server and poke around. The LDF file for the database exists in the C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA folder, but attempting to do any work with the database from Management Studio results in a dialog box reporting the same error - 9001: The log for database is not available... This is the first time I've received this error, and I've been hosting this site (and others) on this dedicated web server for over two years now. It is my understanding that this error indicates a corrupt log file. I was able to get the website back online by Detaching the database and then restoring a backup from a couple days ago, but my concern is that this error is indicative of a more sinister problem, namely a hard drive failure. I emailed support at the web hosting company and this was their reply: There doesn't appear to be any other indications of the cause in the Event Log, so it's possible that the log was corrupted. Currently the memory's resources is at 87%, which also may have an impact but is unlikely. Can the log just "become corrupted?" My question: What are the next steps I should take to diagnose this problem? How can I determine if this is, indeed, a hardware problem? And if it is, are there any options beyond replacing the disk? Thanks

  Read the article

• Installing Windows 7 over PXE, preferably with domain autojoin

  - by Ivan Vucica

  At an educational non-profit, I've inherited a previously set-up Windows domain that, after the first reinstall of the machines, we ended up not using by simply not joining machines back into the domain. Over last summer, before the annual reinstall for shipping machines to the summer school, I toyed with the idea of installing Windows 7 over network, instead of just imaging the machines. It took a bit longer than I expected to figure out the basics; honestly, I expected that Windows would be more friendly for PXE installation out of the box. What I'm interested in is best practices for installing Windows 7 over PXE with domain autojoin. I'd love it if the whole setup could optionally be hosted on a UNIX based system as well. I've had some success by preparing an ISO using Windows Deployment Kit, and loading the ISO into memory. This was needed since I wanted a menu, and I think I couldn't get PXELINUX to chainload into Windows' bootloader. Unfortunately, I couldn't figure out much about customization of the Windows setup in that timeframe nor could I get Samba to work properly; studying the stuff ended up being too lengthy, especially the portion where I edited a disk image on Windows and copied it outside. WDK didn't make things easier by mounting the disk image into RAM, and writing it in its entirety when done with it, making me a very sad boy. I've recently found a different approach, too, that appears to be closer to Microsoft's original idea for netboot deployment and does not involve ISOs. So my question boils down to the following. What exact approach do you use for netbooting Windows 7 setup? How can Windows 7 setup be best customized to be completely unattended, including installation on specific system partition and not destroying the data partition, creation of passworded admin and default user, choice of MAC-address-based hostname, and joining a domain? As much details as possible for everyone's future reference would be appreciated. WDS isn't a bad choice, but if a Linux-based install can be used, that'd be better.

  Read the article

• Dell R320 RAID 10 with CacheCade

  - by Geekman

  I'm looking for a higher-performance build for our 1RU Dell R320 servers, in terms of IOPS. Right now I'm fairly settled on: 4 x 600 GB 3.5" 15K RPM SAS RAID 1+0 array This should give good performance, but if possible, I want to also add an SSD Cache into the mix, but I'm not sure if there's enough room? According to the tech-specs, there's only up to 4 total 3.5" drive bays available. Is there any way to fit at least a single SSD drive along-side the 4x3.5" drives? I was hoping there's a special spot to put the cache SSD drive (though from memory, I doubt there'd be room). Or am I right in thinking that the cache drives are simply drives plugged in "normally" just as any other drive, but are nominated as CacheCade drives in the PERC controller? Are there any options for having the 4x600GB RAID 10 array, and the SSD cache drive, too? Based on the tech-specs (with up to 8x2.5" drives), maybe I need to use 2.5" SAS drives, leaving another 4 bays spare, plenty of room for the SSD cache drive. Has anyone achieved this using 3.5" drives, somehow?

  Read the article

• Server nearly unusable when doing disk writes

  - by Wikser

  My question closely relates to my last question here on serverfault. I was copying about 5GB from a 10 year old desktop computer to the server. The copy was done in Windows Explorer. In this situation I would assume the server to be bored by the dataflow. But as usual with this server, it really slowed down. At least I could work with the remote session, even there was some serious latency. The copy took its time (20min?). In this time I went to a colleague and he tried to log in in the same server via remote desktop (for some other reason). It took about a minute to get to the login screen, a minute to open the control panel, a minute to open the performance monitor, ... Icons were loading maybe one per second. We saw the following (from memory): CPU: 2% Avg. Queue Length: 50 Pages/sec: 115 (?) There was no other considerable activity on the server. The server seldom serves some ASP.NET pages, which became also very slow in this time. The relevant configuration is as follows: Windows 2003 SEAGATE ST3500631NS (7200 rpm, 500 GB) LSI MegaRAID based RAID 5 4 disks, 1 hot spare Write Through No read-ahead Direct Cache Mode Harddisk-Cache-Mode: off Is this normal behaviour for such a configuration? What measurements could give further clues? Is it reasonable to reduce the priority of such copy I/O and favour other processes like the remote desktop? How would you do that? Many thanks!

  Read the article

• MAMP MySQL won't start

  - by Tony

  I uninstalled MAMP completely, downloaded fresh copy of MAMP 2 from the MAMP website, did a clean install. However, when I try to start mysql, I get the following error log 111120 21:37:49 mysqld_safe Starting mysqld daemon with databases from /Applications/MAMP/db/mysql 111120 21:37:50 [Warning] You have forced lower_case_table_names to 0 through a command-line option, even though your file system '/Applications/MAMP/db/mysql/' is case insensitive. This means that you can corrupt a MyISAM table by accessing it with different cases. You should consider changing lower_case_table_names to 1 or 2 111120 21:37:50 [Note] Plugin 'FEDERATED' is disabled. 111120 21:37:50 InnoDB: The InnoDB memory heap is disabled 111120 21:37:50 InnoDB: Mutexes and rw_locks use GCC atomic builtins 111120 21:37:50 InnoDB: Compressed tables use zlib 1.2.3 111120 21:37:50 InnoDB: Initializing buffer pool, size = 128.0M 111120 21:37:50 InnoDB: Completed initialization of buffer pool 111120 21:37:50 InnoDB: highest supported file format is Barracuda. 111120 21:37:50 InnoDB: Waiting for the background threads to start 111120 21:37:51 InnoDB: 1.1.5 started; log sequence number 1595675 111120 21:37:51 [ERROR] /Applications/MAMP/Library/bin/mysqld: unknown option '--skip-locking' 111120 21:37:51 [ERROR] Aborting 111120 21:37:51 InnoDB: Starting shutdown... 111120 21:37:51 InnoDB: Shutdown completed; log sequence number 1595675 111120 21:37:51 [Note] /Applications/MAMP/Library/bin/mysqld: Shutdown complete 111120 21:37:51 mysqld_safe mysqld from pid file /Applications/MAMP/tmp/mysql/mysql.pid ended I've no clue why this is happening. I googled around and made sure that no instance of MySQL is running. Nothing seems to help.

  Read the article

• Xen domain migration locking problem

  - by brodie

  I am trying to live migrate a VM (domain) between two Xen servers. I have xen locking (xend-domain-lock = yes) configured with a ocfs2 shared storage between them. This locking is working fine. If I try to start up the VM on the secondary server it refuses to start (which is correct). The problem I am having is when trying to do live migration, it seems like it is trying to remove the lock twice. The first lock it removes is for "domain test", the second is for "migrating-test" which does not exist. Should their be a lock for this "migrating-test" VM? These are the relevant options in the xen config file: (xend-relocation-server yes) (xend-relocation-port 8002) (xend-relocation-address '') (xend-relocation-hosts-allow '') (xend-domain-lock yes) (xend-domain-lock-path /var/lib/xen/lock) This is the section of the log: [2010-06-10 10:45:57 14488] DEBUG (XendDomainInfo:4054) Releasing lock for domain test [2010-06-10 10:45:57 14488] INFO (XendCheckpoint:474) SUSPEND shinfo 000c6ceb [2010-06-10 10:45:57 14488] INFO (XendCheckpoint:474) delta 21ms, dom0 95%, target 0%, sent 57Mb/s, dirtied 173Mb/s 111 pages 4: sent 111, skipped 0, delta 6ms, dom0 100%, target 0%, sent 606Mb/s, dirtied 606Mb/s 111 pages [2010-06-10 10:45:57 14488] INFO (XendCheckpoint:474) Total pages sent= 131295 (0.99x) [2010-06-10 10:45:57 14488] INFO (XendCheckpoint:474) (of which 0 were fixups) [2010-06-10 10:45:57 14488] INFO (XendCheckpoint:474) All memory is saved [2010-06-10 10:45:57 14488] INFO (XendCheckpoint:474) Save exit rc=0 [2010-06-10 10:45:57 14488] INFO (XendCheckpoint:123) Domain 22 suspended. [2010-06-10 10:45:57 14488] DEBUG (XendDomainInfo:2757) XendDomainInfo.destroy: domid=22 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:2227) Destroying device model [2010-06-10 10:45:58 14488] INFO (image:567) migrating-test device model terminated [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:2234) Releasing devices [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:2247) Removing vif/0 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:1137) XendDomainInfo.destroyDevice: deviceClass = vif, device = vif/0 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:2247) Removing vkbd/0 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:1137) XendDomainInfo.destroyDevice: deviceClass = vkbd, device = vkbd/0 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:2247) Removing console/0 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:1137) XendDomainInfo.destroyDevice: deviceClass = console, device = console/0 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:2247) Removing vbd/51712 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:1137) XendDomainInfo.destroyDevice: deviceClass = vbd, device = vbd/51712 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:2247) Removing vfb/0 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:1137) XendDomainInfo.destroyDevice: deviceClass = vfb, device = vfb/0 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:4054) Releasing lock for domain migrating-test [2010-06-10 10:45:59 14488] ERROR (XendDomainInfo:4070) Failed to remove unmanaged directory /var/lib/xen/lock/b01515ae-9173-03cb-0cb7-06f3dfbede8b.

  Read the article

• Are These Parts compatible?

  - by ell

  I have never assembled a PC before, although I have taken an old one apart and replaced a few parts in others here and there so I have (very) limited experience. I have been looking to make a pc and here are the parts I might buy: Foxconn P45AL Intel P45 (Socket 775) DDR2 Motherboard (with onboard sound I believe) Gigabyte GeForce GTX 460 OC 768MB GDDR5 PCI-Express Graphics Card Already have 2 1gb sticks of dual channel DDR2 memory Intel Core 2 Quad Q8400 LGA775 'Yorkfield' 2.66GHz 4MB-cache Processor Samsung SpinPoint F3 1TB SATA-II 32MB Cache Hard Drive Antec Dark Fleet Series DF10 Gaming Enclosure – Black I already have monitor, mouse, keyboard and DVD/CD drive Akasa Freedom Power 1000W Modular Power Supply I have never done this before so feel free to laugh at me for getting something obvious wrong, forgetting a vital component etc. but is all of this compatible? And have I gone overkill on the PSU, if so, please recommend one. Thanks in advance, ell. EDIT: Added PSU which I forgot to mention EDIT: I would be using this to surf the internet, write e-mails, chat, word process, play games such as team fortress 2 & spring rts (at highest graphics hopefully), some 3d modelling in blender, some opengl programming, and image editing in GIMP.

  Read the article

• What is the best way to create a failover cluster for my IIS website?

  - by ObligatoryMoniker

  Our eCommerce website www.tervis.com currently runs on two servers: SQL server: 2005 x 86 on Windows Server 2003 Standard x86 with a single dual core processor and 4 gb of memeory IIS server: Windows Server 2008 Web edition x64 with dual quad core hyper threaded processors and 32 gb of memory Tervis.com's revenue has steadily grown to the point where we need to have redundant servers deployed with a fail over mechanism so that we do not have any down time. Because the SQL server is so underpowered compared to the web server my thought was to purchase: 2 x SQL Server 2008 R2 web edition x64 single processor license 2 x Windows Server 2008 R2 Web Edition Licenses 1 x New Physical dual quad core 32 GB server 1 x F5 Load Balancer I need the Windows Server 2008 R2 Web Edition licenses so that I can run SQL and IIS on the same box for both of these servers. The thought is to run this as an active/passive fail over cluster that could be upgraded to an active/active cluster if we purchased the additional SQL licensing. The F5 load balancer would serve as the device that monitors the two servers and if the current active one stops responding then fails over to using the other server. To be clear this is not windows clustering but simply using a load balancer to fail over between two computers so that you now have a cluster in the general sense. Is this really the best way to accomplish what I need? Is there some way to leverage the old server 2003 SQL server to function as the devices that funnels http requests to the appropriate active server and then fails over if a problem occurs? Is there any third party clustering software that might help me accomplish this in a simpler fashion?

  Read the article

• Varnish returning 503, FetchError (could not get storage)

  - by Archan

  On the current setup we're running into a problem with Varnish, we're running a CentOS 5.7 x86_64 xenpv, with Cpanel WHM, hosted at VPS.net. Sometimes we will recieve a Guru Meditation from Varnish, and when we look in the varnishlog with the following command varnishlog -d -c -m TxStatus:503 it returns output similar to the following: 15 VCL_call c recv 15 VCL_acl c NO_MATCH devs 15 VCL_return c pass 15 VCL_call c hash 15 Hash c **** 15 Hash c ************* 15 VCL_return c hash 15 VCL_call c pass pass 15 Backend c 12 default default 15 TTL c 1835862523 RFC 0 -1 -1 1332454056 0 1332454055 375007920 0 15 VCL_call c fetch hit_for_pass 15 ObjProtocol c HTTP/1.1 15 ObjResponse c OK 15 ObjHeader c Date: Thu, 22 Mar 2012 22:07:35 GMT 15 ObjHeader c Server: Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 mod_fcgid/2.3.6 15 ObjHeader c X-Powered-By: PHP/5.3.9 15 ObjHeader c Expires: Thu, 19 Nov 1981 08:52:00 GMT 15 ObjHeader c Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 15 ObjHeader c Pragma: no-cache 15 ObjHeader c Content-Type: text/html; charset=utf-8 15 ObjHeader c X-Cacheable: NO:Cache-Control=private 15 FetchError c chunked read_error: 12 (Could not get storage) 15 VCL_call c error deliver 15 VCL_call c deliver deliver As far as I have could gather, we could try increasing the nuke_limit, but currently we have a nuke_limit of 500, and when running varnishstat -1 -f n_lru_nuked we "only" get a total of 1031, even though we have seen the error happen on several pages. When we then run top to see how much memory Varnish is using, it only shows that it is using 763m, although we've set it to be allowed to use 1200m. Any ideas of what the problem can be?

  Read the article

< Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >