Search Results

Search found 14588 results on 584 pages for 'usb drive'.

Page 41/584 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

  • BIOS not detecting working SATA hard drive

    - by user28927
    Some time ago my power supply died. It's a long story from then till now, but the important bit is that I ended up with a new hard drive and a new power supply. I tested to see if my original hard drive was still alive, and it booted and worked perfectly until I turned it off. When I started it again it would not boot. I bought new SATA cables, assuming that the one I had was not seating properly (it was cheap and wobbly), but no dice. Upon start-up I am presented with a message telling me to insert boot media into the selected drive or add a drive and restart. Neither the new or the old drive is detected by BIOS, my Vista install disk, or from my bootable Linux USB drive. When I remove all of the RAM the computer ceases outputting visual information, and upon reinstalling the ram and starting up again gives me a "failed overclock" error. So, does anyone have an idea as to what might be going on? I'm completely lost at this point.

    Read the article

  • SATA DVD drive refuses to read movie DVDs

    - by poke
    Hey, I have a problem with my DVD Drive (Asus DRW-2014L1T, most current firmware installed) on Windows 7 x64. When I insert a DVD movie and Windows starts to access the drive (for autoplay, or when I manually click on the drive icon), my computer hangs up in a particular way, while trying to read the disk. Explorer stops reacting and several programs won't run or their launch is horribly delayed (like the device manager). In th end, I can't access the movie and can't even eject the disk (probably because Windows is still trying to access it). To get the disk out of the drive I then have to reboot (which sometimes doesn't work either) and eject the disk before Windows boots. BIOS recognizes the drive just fine, and Windows is also able to read data disks (tried it with some software disks), but just refuses any movies. I have checked the region code in the device manager, but it is correct. My notebook is reading the disks just fine btw.. I remember having the same problem with an older drive as well, but I don't remember what I did to make it work again (maybe I didn't even fix the problem back then). I do remember however that booting with the disk inserted made Windows recognize the disk, however this doesn't work in this situation either. Do you have any idea what to do to fix that problem?

    Read the article

  • Recover data from hard drive with partitions (but not most data) overwritten

    - by Macha
    I have a 500GB hard drive I've been keeping around to recover data from that I removed from a failing NAS drive that got sort of... erratic at the end. I finally got rid of the NAS when during a firmware update it removed the partition table. Fast forward to a week ago, when I was building a new PC, and a mixup resulted in me placing the hard drive in question in the new PC and installing Windows XP on the first 100GB. I'm presuming any data on that first 100GB is now gone, but for the rest of it, is there any way I can recover it at home, as professional data recovery is currently too expensive? I have a blank 1TB HDD if I can store any images of that hard drive on. The problem was definitely with the NAS and not the hard drive, as the hard drive had a successful install of Windows when mistakenly place in the new PC, and there were capacitors in the NAS's circuitry clearly broken. The data I want to recover (in order of priority) is: High: Some jpgs of family photos. Medium: Some RAW files. (There are also jpg versions of all of these) Low: Some mp3s, avis and ISOs, I can re-rip most of these if need be, but it'd be handy not to have to. (I don't need a backup lecture, and if you can hold it in from nagging Jeff Atwood for it, you can hold it in from nagging me for it) In short: The partition tables are gone and overwritten. The data is not overwritten, except for an amount equal to the size of a Windows XP SP3 installation.

    Read the article

  • Replacing Failing RAID 1 Drive

    - by mrduclaw
    I hope this is a simple question, but I simply don't know anything about RAID. Some time ago I received a machine that, as I understand it, has two drives in it under RAID 1 (or so that one drive is mirrored on the other and appears as just 1 drive to the OS). Recently, one of these drives has started marking a clicking noise and I would like to replace it. I believe the machine has a hardware RAID controller on the motherboard that handles the RAID stuff, but if it matters the Operating System is Windows XP 32-bit. Is the solution to my problem as simple as buying another drive that is of the same capacity and plugging it in where the clicking drive is currently? Or could I possibly lose everything if the drive that's clicking is the one being mirrored on to the other drive? Is there some menu I need to find before unhooking things? Any best practices out there? I'm sure I'm leaving out some required information, so please just tell me what I'm missing. Thanks!

    Read the article

  • how can i safely remove an external hard drive?

    - by Edmond Condillac
    Two of the three icons of the drive's partitions show on the desktop. One has disappeared and the contents are not accessible. Right clicking on the desktop icon of the partition gives the option to eject. Then the error message shows that the drive is busy and cannot be shut down. The drive is continually pinning. Kindly advise if possible how to safely remove the drive. Can the lost icon of the third drive and the datd contained in it be found, please? Kind regards

    Read the article

  • How do I create a LiveUSB that lets me install any Ubuntu version?

    - by Dariopnc
    What I'd like to do: have Ubuntu installed on a USB drive and from there install any ubuntu version on a hdd. This is kinda different from using usb-creator because I'd like to have a persistent ubuntu install on the USB drive and not upgrade it every 6 months. From there I'd like to be able to install the most recent ubuntu version. I think it's just a matter of configuring ubiquity, but don't know if this is the case and how exactly do this. EDIT: Let's clarify the persistent thing: suppose I have my USB with ubuntu precise on it suppose quantal is out in the wild suppose that I want to install quantal on the hdd of a computer suppose that I want/can use only the USB drive with precise on it I should erase/upgrade precise on the USB drive to quantal and then install it on the hard drive I don't want to touch my ubuntu install on the USB drive, I'd like to be able to install the newer ubuntu version (quantal) on a hdd from another one (precise) on a USB drive I'd better avoid upgrading the installation on the hdd Hope this helps

    Read the article

  • 'unknown filesystem' grub rescue prompt; trying to wipe drive and boot 10.10 live

    - by Patrick
    Im currently running Win7, and want to wipe the drive and install 10.10. I have 10.10 loaded on a USB thumbdrive and it sees the device in BIOS but it only reaches a screen saying; Unknown Filesystem grub rescue> Ive read several results from google and a couple here where people are trying to dual boot and i assume save the data on the drive, but i dont care about doing that, and would prefer to just wipe the drive and start fresh. What steps can i take to get the drive to a point where i can load 10.10 live and get it installed?

    Read the article

  • Nautilus won't browse my USB hard drive unless I double click it twice.

    - by agnul
    On my laptop, running 10.10, whenever I plug in a thumb drive Nautilus will add an icon on the desktop and open a file manager window with the drive contents. This does not work for my 250Mb external hard drive: the icon is added on the desktop, but no file manager window pops up. Double clicking on the icon just causes some disk activity (on the system drive) and nothing else. Double clicking another time on the icon the file manager eventually opens. At first I thought this was related to nautilus-elementary, but after removing nothing has changed. How do I even start debugging this?

    Read the article

  • Ubuntu in USB.. Boot from fixed HDD?

    - by Z9iT
    I am having Ubuntu 12.04 minimal installed on my USB pen-drive; which I use on several systems as portable OS. I was thinking to edit the boot parameters so that before the main Ubuntu OS is loaded, it shows an option to Boot from Hard Drive for 5 seconds, and then boots to Ubuntu. This way i'll be able to have an option to boot to the OS installed on the Hard-Drive, without removing or unplugging my ubuntu USB stick. How do I edit the boot parameters to achieve this?

    Read the article

  • Wireless USB keyboard and mouse can wake system, but then receiver is inactive

    - by BlueMonkMN
    I have a Microsoft brand USB device that acts as a receiver for a wireless Microsoft Keyboard and a wireless Mouse. When it's operating normally, there are LEDs on the device indicating Caps Lock, Num Lock and Function Lock, of which the latter 2 are usually lit. It is plugged into a Dell Isnpiron 531 with Windows 7 32-bit running on an AMD Athlon 64 X2 Dual Core processor 5000+. When the computer goes to sleep (the power indicator on the main box is flashing), I can wake it by moving the mouse. So far all is good. However, something changed in, I think, the past couple weeks (I suspect due to a Microsoft driver update problem). Before the change, after waking the computer, everything would operate normally as far as I could tell, but now after waking the computer, the receiver has no lights on, and the keyboard and mouse are completely unresponsive (which is odd, considering the mouse woke up the computer). There is a button on the receiver that's supposed to reset the wireless connection and flash the lights while it does so, but it has no effect in this state. It's like the receiver doesn't have power (but how would the system know I moved the mouse, unless the power was on until it woke up?). I have checked the BIOS/CMOS settings or whatever you call them, and did not see anything related to USB in the power management section. I have checked Windows 7 device manager and ensured that all the USB Root Hub devices have the setting unchecked for allowing the USB power to be turned off. Like I said, this was working before, and the only thing I can think of that's changed is applying Windows Updates.

    Read the article

  • Windows 7 64bits installation via USB asks for drivers

    - by Shikiryu
    I just bought a new config ( ASUS p8z68-v lx, i5-2500k + ram and new graphic card ). Coming back and installing it in my old computer, I just saw that my DVD player was on IDE (yup…). So, I needed to install windows 7 64bits from my usb key. Fine, I made my usb key bootable and copy the official DVD on it (the same version that was on my old computer), set BIOS to boot on it first and started the computer up. It worked fine until it asks me for cd/dvd drivers (which is funny since, I do it via USB because I can't plug in my DVD player :D) I have 3 SATA HDD plugged in and that's it. I made a small google search and found that it could be SATA or RAID drivers. Fine, I took another USB KEY and put all my motherboard drivers on it (from the CD sold with the MB) and none of those drivers seemed to work. I tried downloading new drivers from ASUS website and same effect. Any idea but no "buy a new DVD player", I'm now broke for the month :) ?

    Read the article

  • Toshiba Satellite P755D USB 3.0 Drivers Missing - Windows 7 Professional

    - by nicorellius
    I bought a Toshiba Satellite P755D recently and installed Windows 7 Professional on the machine. It runs great. But I noticed the exclamation point in the yellow triangle icon in the Device Manager next to the Universal Serial Buss (USB) Controller (I'm assuming this is the USB 3.0 controller because mine doesn't recognize devices). Normally, when this kind of thing happens I go to the manufacturer's website and download appropriate drivers and call it a day. But not this time... I browsed to my model and found no driver for the USB 3.0 controller. I tried other HW and Utility drivers, thinking they would be bundled. No luck. I tried looking up the motherboard in my machine. Generic name, no luck. I then called Toshiba technical support and they tried basic troubleshooting, eg, uninstall device, reboot, for auto-installation; no luck. I popped the Windows 7 disk back in and tried to get information that way, no luck. Finally, the technical support guy said he would look into the engineer's system to see if there was a specific driver available and that's where I'm at. The technician told me that these USB 3.0 drivers come within the native driver pack in windows but that doesn't seem to be the case. Any ideas? EDIT - See attached screen shots.

    Read the article

  • USB question (how durable is it, how should I workaround this)

    - by Shiki
    The plot is quite simple. Got a Razer mouse. If I plug it in, it works. After a shutdown/hibernation, I have to replug it entirely at the back of the PC. (It works in my laptop even after severel shutdown, etc, so yes I guess it's my motherboard.. but it still got 2 years of warranty and it comes with quad SLI, its not an old motherboard at all. (MSI P7N SLI FI (bought it after a hungarian guy's recommendation)). So. I only could come up with one "solution". Get 3 USB cable (you know, USB-USB). If its possible the shortest ones (don't know if the responsibility/anything will worsen), AND replug only the middle+closest to the USB port junction, since those are replaceable. What do you think? Any other idea? (BIOS is updated, mouse driver ... doesn't really matter, the mouse won't even blink a bit after this happens. It lights up and goes totally dead.)

    Read the article

  • Problem with ubuntu 10.10 running from USB drive

    - by Surjya Narayana Padhi
    Hi Geeks, I recently downloaded Ubuntu 10.10 and created an USB drive with that. I started to run the Ubuntu from that USB drive. But I am facing so much problem. I am thinking why its not so much easy like Windows to do all my job in ubuntu. Always I get some error message or to install something. This time I am getting the following errors. I am trying to download and install Aircrack-ng. So used the command sudo apt-get install aircrack-ng. But the installation stops with the following error : update-initramfs: deferring update (trigger activated) cp: cannot stat `/vmlinuz': No such file or directory dpkg: error processing bcmwl-kernel-source (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: initramfs-tools bcmwl-kernel-source E: Sub-process /usr/bin/dpkg returned an error code (1) I don't even have the aptitude command installed till now. Are all these errors because of I am running the ubuntu from USB drive? Is there any simple and easy way to go to Ubuntu Software Center and download all the required essentials at one shot and then Aircrack-ng? I could not find the Aircrack-ng in Ubuntu Software Center Can anybody give me detail steps to solve all my problems above. I am frustrated searching for updates and installations. When something works and something does not work. Can anybody suggest me how I should proceed after installing ubuntu to run on a USB drive. So that I can use the OS like Windows. Like software download,wireless driver, sound, video, documents, C:, D: all things should be there. Please somebody help.

    Read the article

  • Problem with ubuntu 10.10 running from USB drive

    - by Surjya Narayana Padhi
    I recently downloaded Ubuntu 10.10 and created an USB drive with that. I started to run the Ubuntu from that USB drive. But I am facing so much problem. I am thinking why its not so much easy like Windows to do all my job in ubuntu. Always I get some error message or to install something. This time I am getting the following errors. I am trying to download and install Aircrack-ng. So used the command sudo apt-get install aircrack-ng. But the installation stops with the following error : update-initramfs: deferring update (trigger activated) cp: cannot stat `/vmlinuz': No such file or directory dpkg: error processing bcmwl-kernel-source (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: initramfs-tools bcmwl-kernel-source E: Sub-process /usr/bin/dpkg returned an error code (1) I don't even have the aptitude command installed till now. Are all these errors because of I am running the ubuntu from USB drive? Is there any simple and easy way to go to Ubuntu Software Center and download all the required essentials at one shot and then Aircrack-ng? I could not find the Aircrack-ng in Ubuntu Software Center Can anybody give me detail steps to solve all my problems above. I am frustrated searching for updates and installations. When something works and something does not work. Can anybody suggest me how I should proceed after installing ubuntu to run on a USB drive. So that I can use the OS like Windows. Like software download,wireless driver, sound, video, documents, C:, D: all things should be there. Please somebody help.

    Read the article

  • USB-to-Serial showing gibberish at 115200 Baud

    - by Mose
    I've got a serious problem which drives me crazy because I tried everything I could think of. First of all, I made a video: http://youtu.be/boghkuq7L_s but please read the following text for more information, not only view the video! When using a USB-to-Serial interface everything works as long as I don't go beyond 57600 Baud. At higher rates I only get giberish like this: év.­b0JNLYÆÿ¿iëd0U²(kßÞb! ú]/xscB!ï¯!BoXûÿ1ïâÖCÿ6ÌAnè*íÌC)º¿BíÞØ.C.@ÆÃwHJÂs "YE:ñ.èFðÌCÊ÷ÞÄ !x H w6@BtbHJ ̪ Ì6ì H¾a¿bH.">îvy®;f<ßBÌ p­L¨fæH­E ­þ¼MBÞI What makes the problem so strange is, I exchanged every component and the problem still presists. I tried differtent OSes (Ubuntu, WinXP, Win7, OSX 10.7) with 32 and 64 Bit. I tried USB-to-Serial interface from FTDI and Prolific. I tried reading the output from my Raspberry PI and from an Asterisk Appliance. I changed the cables and the wiring. Nothing helped. In the video I made a example with a old Notebook with native COM and put the USB-to-Serial to the same connection as "sniffer" (only Rx and GND connected) to make sure the output and everything is ok as one can see on the native port. The voltage is ok. Settings for both are 115200 Baud, 8 Bit with 1 Stop and no flow control. Native is ok. USB is messed up. I used the newest drivers and double checked all connections. I have no idea what is wrong here. As I couldn't find anyone describing problems like this I question my long experiance in computer science and think I'm doing some completly wrong... Please help :-/

    Read the article

  • USB to USB CD ROM emulator

    - by JohnnyLambada
    I'm wondering if anyone knows of a CDROM emulator that runs on Linux. I want to emulate this configuration: [CDROM DRIVE]----USB CABLE----[COMPUTER UNDER TEST] Where [COMPUTER UNDER TEST] is a computer that boots from a physical CD inserted into the [CDROM DRIVE]. Only instead of the [CDROM DRIVE] I want the following configuration: [CD IMAGE BUILD MACHINE]-----USB CABLE-----[COMPUTER UNDER TEST]. I want to build an ISO image on the [CD IMAGE BUILD MACHINE] and have some sort of USB CDROM emulator running on it to serve up the ISO image to the [COMPUTER UNDER TEST] as though it was talking to the [CDROM DRIVE]. Does this exist? If it does, I can't find it. I want to do this so I can test out bootable CDs without burning a lot of coasters.

    Read the article

  • I accidentally made my new hard drive (the non system drive) my primary partition

    - by qwerty2
    Hi all, When installing a new hard drive, I accidentally formatted it using 'Disk Management' and set it up as my primary active partition, even though it isn't the system drive. Then, when I restarted my machine, Windows wouldn't boot, citing a missing or corrupt SYSTEM folder. Can anyone help me re-enable the system hard drive as my primary active partition? Any help would be greatly appreciated.

    Read the article

  • Deleting old system folders from a drive that is no longer the windows installation drive

    - by grenade
    I dropped my laptop and was no longer able to boot. There were error messages about a corrupt boot record. Replacing the hard drive and reinstalling Win 7 was how I dealt with it. The old drive still appears to be good and I can read and write to it when I connect it as a second drive and mount as D:. However, if I try to recover the space being used by the windows, programdata, program files & program files(x86) folders, by deleting them I get error messages about needing permission from trustedinstaller. If I set myself as the owner of the folders and retry the delete I get error messages about needing permission from myself! Since I'm pretty sure that I have permission from myself to delete the folders, I can only assume that the OS or file system has gotten its panties twisted. I have tried shift, right click, delete from explorer and also if I run "del /f /s /q D:\Windows" from an admin command prompt, I get a succession of Access is denied messages as well. How do I delete D:\Windows, D:\ProgramData, D:\Program Files & D:\Program Files(x86) from a drive that is not the Windows installation drive?

    Read the article

  • Can&rsquo;t eject external USB or Firewire drive in Windows 7

    - by Kelly Jones
    As a SharePoint developer, I work a lot with Virtual Machines (presently using Windows Virtual PC, with Windows 7).  I’m using these VMs with my laptop, and in order to get better performance, I’ve moved them to external hard drives.  (These drives have faster RPMs, larger caches, and a larger capacity, than the internal drive.)  I have one large external drive at home, another similar drive at the office, and a small, slow portable drive that I carry with me. So, at the end of each day at the office, I copy the files from the external drive to my portable drive and then once I get home, I copy them from the portable to the larger external drive I leave at home.  I do this for a couple of reasons: so I can work at home and secondly, so I have backup copies.  (Often, I feel like I’m in the movie “Office Space” when copying the files before I leave the office). Anyway, after the files are copied, I safely eject the external drives, and then hibernate my laptop.  I’ve been doing this for over a year now, but within the last couple of months I started to have issues disconnecting the drives.  Intermittently, some application/process would have a lock on some file on the drive that would keep Windows from safely ejecting it. After looking into it, I found that it was actually the Windows search service that was accessing the drive! Since I wasn’t using Windows search to look for stuff on these drives, I removed them as locations to index. To do this in Windows 7, you need to go to Indexing Options (just type “Indexing” into the search box in the Start menu…).  One of the choices displayed will then be Indexing Options, so click on it and you should then see a window similar to this:   Click on the Modify button and you’ll see this window: Notice the different drives listed above.  My “FreeAgent XTreme (F:)” drive was checked for some reason, which was causing the indexing service to scan the drive looking for new files to make available in the search results.  Ever since I unchecked this box, I’ve been able to safely eject the drive.

    Read the article

  • iPhone tethering via USB not working

    - by arneevertsson
    I can't get USB tethering to work. My setup: iMac with Mac OS 10.6.2 iPhone 3G, Sofware version 3.1.2 (Build 7D11) The phone shows up in iTunes and syncing works as it should. I went to System Preferences / Network and added the iPhone as a Network Service. To the right there is a status message for the selected service. With the iPhone not plugged in, the status message reads: Either the cable for iPhone is not plugged in or the device is not responding. With the iPhone plugged in, the status message reads: Either the cable for iPhone USB is not plugged in or the device is not responding. Almost identical messages, the only difference is "USB". Any clues?

    Read the article

  • System Rescue CD on multiboot usb not working

    - by darkfeline
    I have a multiboot usb with System Rescue CD and GRUB2 on it. When I try to boot it, it tries to find systemrescuecd/sysrcd.dat, attempts to mount /dev/sr0 and all the partitions on /dev/sda before declaring cannot find systemrescuecd/sysrcd.dat on devices and dumping me onto a primitive shell. The relevant entries in grub.cfg: menuentry "SystemRescueCd 32bit" { linux /systemrescuecd/isolinux/rescuecd rootfs=/systemrescuecd subdir=systemrescuecd dostartx setkmap=us initrd /systemrescuecd/isolinux/initram.igz } menuentry "SystemRescueCd 64bit" { linux /systemrescuecd/isolinux/rescue64 rootfs=/systemrescuecd subdir=systemrescuecd dostartx setkmap=us initrd /systemrescuecd/isolinux/initram.igz } I think the problem is that System Rescue CD cannot see /dev/sdb, which is my usb, but I don't know where to begin to fix it. If it helps, I set up my USB with a utility called MultiSystem, which is like MultiISO for Linux.

    Read the article

  • Mechanical mouse using USB-to-PS/2 Adapter freezes occasionally

    - by izn
    I am using an AOpen PS/2 mechanical mouse in Ubuntu 11.10 with a Staples USB-to-PS/2 Adapter with my Intel DP67DE motherboard. The mouse is more comfortable for my hand as it has a lower height than optical mouses. Occasionally the mouse cursor freezes and often I have to unplug it from the USB port and plug it back in to unfreeze it. This happens with all the USB ports. I've been using the adapter for a few weeks now and this seems to be happening more often recently. What might be happening and is there anything that can be done to fix this?

    Read the article

  • WinXP How to Tunnel LPT over USB

    - by Michael Pruitt
    I have a windows program that accesses a device connected to a LPT (1-3) 25 pin port. The communication is bidirectional, and I suspected the control lines are also accessed directly. I would like to migrate the device to a machine that does not have a LPT port. I saw the dos2usb software, but that takes the output (from a DOS program) and 'prints' it formatted for a specific printer. I need a raw LPT connection, and a cable that provides access to all the control signals. I do have a USB to 36-pin Centronics that may have the extra signals. I use it with a vinyl cutter that doesn't like most of the USB dongles. It comes up as USB001. Would adding and sharing a generic printer, then mapping LPT1 to the share get me closer? Would that work for a parallel port scanner? My preferred solution is a USB cable with a driver that will map it to LPT1, LPT2, or LPT3.

    Read the article

  • Ubuntu 9.10 desktop installation via USB (boot)

    - by user277980
    I have made a live boot USB using the UnetBootIn tool for Ubuntu 9.10. I have Windows XP SP2 installed as the primary OS, and I want to make a partition for Ubuntu. But when I try to boot it via USB, it just goes to boot menu of Ubuntu, then I enter the default type for installation. After that nothing happens, just the Ubuntu logo shows up and just that nothing happens after that. I can try the simpler task also i.e. install via CD but I want to know what's not working with this USB boot method. Thanks in advance.

    Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >