Search Results

Search found 13006 results on 521 pages for 'exception'.

Page 410/521 | < Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >

  • ASP.net file operations delay

    - by mtranda
    Ok, so here's the problem: I'm reading the stream from a FileUpload control, reading in chunks of n bytes and writing the array in a loop until I reach the stream's end. Now the reason I do this is because I need to check several things while the upload is still going on (rather than doing a Save(); which does the whole thing in one go). Here's the problem: when doing this from the local machine, I can see the file just fine as it's uploading and its size increases (had to add a Sleep(); clause in the loop to actually get to see the file being written). However, when I upload the file from a remote machine, I don't get to see it until the the file has completed uploading. Also, I've added another call to write the progress to a text file as the progress is going on, and I get the same thing. Local: the file updates as the upload goes on, remote: the token file only appears after the upload's done (which is somewhat useless since I need it while the upload's still happening). Is there some sort of security setting in (or ASP.net) that maybe saves files in a temporary location for remote machines as opposed to the local machine and then moves them to the specified destination? I would liken this with ASP.net displaying error messages when browsing from the local machine (even on the public hostname) as opposed to the generic compilation error page/generic exception page that is shown when browsing from a remote machine (and customErrors are not off) Any clues on this? Thanks in advance.

    Read the article

  • How can I write System preferences with Java? Can I invoke UAC?

    - by Jonas
    How can I write system preferences with Java, using Preferences.systemRoot()? I tried with: Preferences preferences = Preferences.systemRoot(); preferences.put("/myapplication/databasepath", pathToDatabase); But I got this error message: 2010-maj-29 19:02:50 java.util.prefs.WindowsPreferences openKey VARNING: Could not open windows registry node Software\JavaSoft\Prefs at root 0x80000002. Windows RegOpenKey(...) returned error code 5. Exception in thread "AWT-EventQueue-0" java.lang.SecurityException: Could not open windows registry node Software\JavaSoft\Prefs at root 0x80000002: Access denied at java.util.prefs.WindowsPreferences.openKey(Unknown Source) at java.util.prefs.WindowsPreferences.openKey(Unknown Source) at java.util.prefs.WindowsPreferences.openKey(Unknown Source) at java.util.prefs.WindowsPreferences.putSpi(Unknown Source) at java.util.prefs.AbstractPreferences.put(Unknown Source) at biz.accountia.pos.install.Setup$2.actionPerformed(Setup.java:43) I would like to do this, because I want to install an embedded JavaDB database, and let multiple users on the computer to use the same database with the application. How to solve this? Can I invoke UAC and do this as Administrator from Java? And if I log in as Administrator when writing, can I read the values with my Java application if I'm logged in as a User?

    Read the article

  • CommandBuilder and SqlTransaction to insert/update a row

    - by Jesse
    I can get this to work, but I feel as though I'm not doing it properly. The first time this runs, it works as intended, and a new row is inserted where "thisField" contains "doesntExist" However, if I run it a subsequent time, I get a run-time error that I can't insert a duplicate key as it violate the primary key "thisField". static void Main(string[] args) { using(var sqlConn = new SqlConnection(connString) ) { sqlConn.Open(); var dt = new DataTable(); var sqlda = new SqlDataAdapter("SELECT * FROM table WHERE thisField ='doesntExist'", sqlConn); sqlda.Fill(dt); DataRow dr = dt.NewRow(); dr["thisField"] = "doesntExist"; //Primary key dt.Rows.Add(dr); //dt.AcceptChanges(); //I thought this may fix the problem. It didn't. var sqlTrans = sqlConn.BeginTransaction(); try { sqlda.SelectCommand = new SqlCommand("SELECT * FROM table WITH (HOLDLOCK, ROWLOCK) WHERE thisField = 'doesntExist'", sqlConn, sqlTrans); SqlCommandBuilder sqlCb = new SqlCommandBuilder(sqlda); sqlda.InsertCommand = sqlCb.GetInsertCommand(); sqlda.InsertCommand.Transaction = sqlTrans; sqlda.DeleteCommand = sqlCb.GetDeleteCommand(); sqlda.DeleteCommand.Transaction = sqlTrans; sqlda.UpdateCommand = sqlCb.GetUpdateCommand(); sqlda.UpdateCommand.Transaction = sqlTrans; sqlda.Update(dt); sqlTrans.Commit(); } catch (Exception) { //... } } } Even when I can get that working through trial and error of moving AcceptChanges around, or encapsulating changes within Begin/EndEdit, then I begin to experience a "Concurrency violation" in which it won't update the changes, but rather tell me it failed to update 0 of 1 affected rows. Is there something crazy obvious I'm missing?

    Read the article

  • JPA2 Criteria API creates invalid SQL when using groupBy

    - by Stephan
    JPA2 with the Criteria API seems to generate invalid SQL for PostgreSQL. For this code: Root<DBObjectAccessCounter> from = query.from(DBObjectAccessCounter.class); Path<DBObject> object = from.get(DBObjectAccessCounter_.object); Expression<Long> sum = builder.sumAsLong(from.get(DBObjectAccessCounter_.count)); query.multiselect(object, sum).groupBy(object); I get the following exception: ERROR: column "dbobject1_.id" must appear in the GROUP BY clause or be used in an aggregate function The generated SQL is: select dbobjectac0_.object_id as col_0_0_, sum(dbobjectac0_.count) as col_1_0_, dbobject1_.id as id1001_, dbobject1_.name as name1013_, dbobject1_.lastChanged as lastChan2_1013_, dbobject1_.type_id as type3_1013_ from DBObjectAccessCounter dbobjectac0_ inner join DBObject dbobject1_ on dbobjectac0_.object_id=dbobject1_.id group by dbobjectac0_.object_id Obviously, the first item of the select statement (dbobjectac0_.object_id) does not match the group by clause. Simplified example It does not even work for this simple example: Root<DBObjectAccessCounter> from = query.from(DBObjectAccessCounter.class); Path<DBObject> object = from.get(DBObjectAccessCounter_.object); query.select(object).groupBy(object); which returns select dbobject1_.id as id924_, dbobject1_.name as name933_, dbobject1_.lastChanged as lastChan2_933_, dbobject1_.type_id as type3_933_ from DBObjectAccessCounter dbobjectac0_ inner join DBObject dbobject1_ on dbobjectac0_.object_id=dbobject1_.id group by dbobjectac0_.object_id Does anyone know how to fix this?

    Read the article

  • C++ boost.asio server and client connection undersanding

    - by Edgar Buchvalov
    i started learning boost.asio and i have some problems with undersanding tcp connections. There is example from official boost site: #include <ctime> #include <iostream> #include <string> #include <boost/asio.hpp> using boost::asio::ip::tcp; std::string make_daytime_string() { using namespace std; // For time_t, time and ctime; time_t now = time(0); return ctime(&now); } int main() { try { boost::asio::io_service io_service; tcp::acceptor acceptor(io_service, tcp::endpoint(tcp::v4(), 13)); for (;;) { tcp::socket socket(io_service); acceptor.accept(socket); std::string message = make_daytime_string(); boost::system::error_code ignored_error; boost::asio::write(socket, boost::asio::buffer(message), boost::asio::transfer_all(), ignored_error); } } catch (std::exception& e) { std::cerr << e.what() << std::endl; } return 0; } there is question, why if i want to connet to this server via client i have t write: boost::asio::io_service io_service; tcp::resolver resolver(io_service); tcp::resolver::query query(host_ip, "daytime"); //why daytime? tcp::resolver::iterator endpoint_iterator = resolver.resolve(query); tcp::resolver::iterator end; why daytime?, what it meant and where it is inicialized in server, or i just doesn't missed somefing? there is full client code : www.boost.org/doc/libs/1_39_0/doc/html/boost_asio/tutorial/tutdaytime1.html thanks for explanation in advance

    Read the article

  • Redirect to another action in an interceptor in struts 2

    - by user292662
    I am currently in the process of learning Struts 2 and I am currently building a simple application where unverified users are redirected to a login form. I have a login form and action functional which takes the users credentials, verifies them and stores a User object in the session however I am now trying to prevent access to pages before the login has taken place and I am trying to do this with an interceptor. My problem is that I have written an interceptor that checks whether the User object has been saved in the session but if it has not I want to redirect to the login page and can't find any way of doing this without bypassing struts and using the HttpServletResponse.sendRedirect method Configuration: <package name="mypackage" extends="struts-default" namespace="/admin"> <interceptors> <interceptor name="login" class="my.LoginInterceptor" /> </interceptors> <default-interceptor-ref name="login"/> <action name="login" class="my.LoginAction"> <result name="input">/admin/login.jsp</result> <result name="success" type="redirect">/admin</result> </action> <action name="private" class="my.PrivateAction"> <result>/admin/private.jsp</result> </action> </package> The interceptor code: @Override public String intercept(ActionInvocation inv) throws Exception { Map<String, Object> session = inv.getInvocationContext().getSession(); Object user = session.get("user"); if(user == null) { // redirect to the 'login' action here } else { return inv.invoke(); } }

    Read the article

  • Convert Form to UserControl

    - by Joe
    I have a 3rd party code library that I'm using; part of this library is a winforms application for editing the configuration files used by this library. I would like to embed their configuration editor app into my application. I have the source code to their library and the configuration editor is (as far as I can tell) a straight forward Winforms app using standard controls. I'm trying to convert the app's main form into a UserControl so that I can host it inside my application which is WPF (WPF's WindowsFormsHost won't host a Form object, I get an exception). I changed the form object to inherit from UserControl instead of Form and fixed all the compiler errors (there weren't many, just property initializations that don't exist on UserControls) but what's happening is my newly converted control is just blank. When I run my test app I don't see any of the controls that make up the original form, just a blank page. Any ideas? I really don't want to have to re-implement their app from scratch, that would suck. Edit: I forgot to mention I'm testing this in a WinForms application, not WPF, to just get the control working before trying to use it from WPF.

    Read the article

  • Getting identity from Ado.Net Update command

    - by rboarman
    My scenario is simple. I am trying to persist a DataSet and have the identity column filled in so I can add child records. Here's what I've got so far: using (SqlConnection connection = new SqlConnection(connStr)) { SqlDataAdapter adapter = new SqlDataAdapter("select * from assets where 0 = 1", connection); adapter.MissingMappingAction = MissingMappingAction.Passthrough; adapter.MissingSchemaAction = MissingSchemaAction.AddWithKey; SqlCommandBuilder cb = new SqlCommandBuilder(adapter); var insertCmd = cb.GetInsertCommand(true); insertCmd.Connection = connection; connection.Open(); adapter.InsertCommand = insertCmd; adapter.InsertCommand.CommandText += "; set ? = SCOPE_IDENTITY()"; adapter.InsertCommand.UpdatedRowSource = UpdateRowSource.OutputParameters; var param = new SqlParameter("RowId", SqlDbType.Int); param.SourceColumn = "RowId"; param.Direction = ParameterDirection.Output; adapter.InsertCommand.Parameters.Add(param); SqlTransaction transaction = connection.BeginTransaction(); insertCmd.Transaction = transaction; try { assetsImported = adapter.Update(dataSet.Tables["Assets"]); transaction.Commit(); } catch (Exception ex) { transaction.Rollback(); // Log an error } connection.Close(); } The first thing that I noticed, besides the fact that the identity value is not making its way back into the DataSet, is that my change to add the scope_identity select statement to the insert command is not being executed. Looking at the query using Profiler, I do not see my addition to the insert command. Questions: 1) Why is my addition to the insert command not making its way to the sql being executed on the database? 2) Is there a simpler way to have my DataSet refreshed with the identity values of the inserted rows? 3) Should I use the OnRowUpdated callback to add my child records? My plan was to loop through the rows after the Update() call and add children as needed. Thank you in advance. Rick

    Read the article

  • How to use a int2 database-field as a boolean in Java using JPA/Hibernate

    - by mg
    Hello... I write an application based on an already existing database (postgreSQL) using JPA and Hibernate. There is a int2-column (activeYN) in a table, which is used as a boolean (0 = false (inactive), not 0 = true (active)). In the Java application i want to use this attribute as a boolean. So i defined the attribute like this: @Entity public class ModelClass implements Serializable { /*..... some Code .... */ private boolean active; @Column(name="activeYN") public boolean isActive() { return this.active; } /* .... some other Code ... */ } But there ist an exception because Hibernate expects an boolean database-field and not an int2. Can i do this mapping i any way while using a boolean in java?? I have a possible solution for this, but i don't really like it: My "hacky"-solution is the following: @Entity public class ModelClass implements Serializable { /*..... some Code .... */ private short active_USED_BY_JPA; //short because i need int2 /** * @Deprecated this method is only used by JPA. Use the method isActive() */ @Column(name="activeYN") public short getActive_USED_BY_JPA() { return this.active_USED_BY_JPA; } /** * @Deprecated this method is only used by JPA. * Use the method setActive(boolean active) */ public void setActive_USED_BY_JPA(short active) { this.active_USED_BY_JPA = active; } @Transient //jpa will ignore transient marked methods public boolean isActive() { return getActive_USED_BY_JPA() != 0; } @Transient public void setActive(boolean active) { this.setActive_USED_BY_JPA = active ? -1 : 0; } /* .... some other Code ... */ } Are there any other solutions for this problem? The "hibernate.hbm2ddl.auto"-value in the hibernate configuration is set to "validate". (sorry, my english is not the best, i hope you understand it anyway)..

    Read the article

  • send email C# using smtp server with username password authentification

    - by KK
    I have a piece of code that sends email.. heres the code This is not working for me. This a remote smtp service ... and i double checked that email web access works fine .. i can login using the gui, recieve and send emails. But when i try to do it through code .. it fails with the message ... {System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.0 No AUTH command has been given. Can anybody advise ... and also they dont have EWS exposed ie.e exchange web service ./.. this is the way to go .. port is 25 and no SSL or TLS Button b = sender as Button; try { MailMessage msg = new MailMessage(senderEmail, recieverEmail, "afdasfas", "safasfa"); //MailMessage msg = new MailMessage(senderEmail, recieverEmail, subject, subject); System.Net.Mail.SmtpClient mailclient = new System.Net.Mail.SmtpClient(EmailSmtpServer, outgoingPort); System.Net.NetworkCredential auth = new System.Net.NetworkCredential(senderEmail, senderPassword); mailclient.Host = EmailSmtpServer; mailclient.UseDefaultCredentials = false; mailclient.Credentials = auth; mailclient.Send(msg); MessageBox.Show(b.Content + ":WORKED"); } catch (Exception e4) { MessageBox.Show(b.Content + ": " +e4.Message); MessageBox.Show(b.Content + ": " + e4.StackTrace); }

    Read the article

  • how to associate the activemq-core.xsd url with the activemq.xsd found in the jar file?

    - by livia
    Hello, Somebody knows how to associate the activemq-core.xsd url with the activemq.xsd found in the jar file (activemq-core-5.2.0.jar)? I dig some solution in internet but didn't work. I'm getting this error: Caused by: org.springframework.beans.factory.xml.XmlBeanDefinitionStoreException: Line 19 in XML document from class path resource [jms-context.xml] is invalid; nested exception is org.xml.sax.SAXParseException: cvc-complex-type.2.4.c: The matching wildcard is strict, but no declaration can be found for element 'amq:broker'. at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:404) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:342) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:310) at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:143) at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:178) at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:149) at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:212) at org.springframework.test.context.support.AbstractGenericContextLoader.loadContext(AbstractGenericContextLoader.java:81) at org.springframework.test.context.support.AbstractGenericContextLoader.loadContext(AbstractGenericContextLoader.java:42) at org.springframework.test.context.TestContext.loadApplicationContext(TestContext.java:173) at org.springframework.test.context.TestContext.getApplicationContext(TestContext.java:197) This shoud me hapening because we remove the URL from the schemaLocation (http://activemq.apache.org/schema/core classpath:activemq.xsd), and we are using localy. But I don't know why XML are not finding the activemq.xsd during the build process. I add the JAR file in the classpath, should not work like that?? Thanks in advance for any help

    Read the article

  • C# client to Java web service

    - by tomislavg
    I have received wsdl file from outside company. I'm using VS2005 c#. With wsdl.exe I have created class containing methods and types for the given web service. To connect to the service outside company requires that certificate from the smart card is inputed in the header. I think i have achieved this with service.ClientCertificates.Add("Path to exported cert" - at least for now, after probably later i will take it from Certificate Store When service is called there are three steps that are taken and visible by the Fidller(Web Debugging Proxy)). service is called on the url http://test.company.com/webservice.wsdl service redirects the request to certificate server and pin needs to be inputed to get cookie for the server service is again redirected to url http://test.company.com/webservice.wsdl At point 1. I can see that my request send to the server contains .... but at point 3. i can not see request` just a empty string. The exception is thrown Msg: Possible SOAP version mismatch: Envelope namespace http://schemas.xmlsoap.org/wsdl/ was unexpected. Expecting http://schemas.xmlsoap.org/soap/envelope/. Does somebody have an example how to connect to java web service with certificate and AlowRedirect enabled for the web service? Any ideas what i am doing wrong are more that welcome.

    Read the article

  • DataReader-DataSet Hybrid solution

    - by G33kKahuna
    My solution architects and I have exhausted both pure Dataset and Datareader solutions. Basically we have a Microsoft.NET 2.0 windows service application that pulls data based on a query and processes additional tasks per record; almost a poor mans workflow system. The recordsets are broader (in terms of the columns) and deeper (in terms of number of records). We observed that DataSet performs much better in terms of performance but runs into contraints as # of records increase say 100K+ we start seeing System.OutOfMemoryException on a 4G machine with processModel configured to run at memoryLimit set to 85. Since this is a multi-threaded app, there could be multiple threads processing different queries and building different DataSets, so we run into the exception sooner in that case DataReader on the other hand works but is a lot slower and hits other contraints; if there is some sort of disconnect it has to start over again or leaves open connections on the DB side and worst case takes down the service completely etc. So, we decided the best option would be some sort of hybrid solution. I'm open to guidance and suggestions. Are there any hybrid solutions available? Any other suggestions

    Read the article

  • Open PDF Content files in ASP.NET MVC 2

    - by mcbingo
    I want to provide simple href links to my PDF forms that reside in my Forms folder. I have a created a simple Index.aspx and FormController Index action that simple iterates through the list of PDF files using my FormMetaData.xml file. The links get created just fine but when you click on the links I get a 404 exception. That looks like this: Server Error in '/' Application. The resource cannot be found. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /Forms/ccindteamgolfform.pdf Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927 This seems like this should open up a new browser window with the PDF in it but perhaps I am making a bad assumption. The PDF content files have Build Action of Content and Copy to Output set to Copy Always. Here is an example output html for the link from my Index.aspx page: <span class="form"> <a href="Forms/ccindteamgolfform.pdf" target="_blank"> <span class="description">Entry Form</span></span> I must be missing something because this does not work. Do I need to add a MapRoute for these documents? Or am I missing something else with the routing? This seems like it should not be that difficult.

    Read the article

  • How can I get at the raw bytes of the request in WCF?

    - by Gregory Higley
    For logging purposes, I want to get at the raw request sent to my RESTful web service implemented in WCF. I have already implemented IDispatchMessageInspector. In my implementation of AfterReceiveRequest, I want to spit out the raw bytes of the message even (and especially) if the content of the message is invalid. This is for debugging purposes. My service works perfectly already, but it is often helpful when working through problems with clients who are trying to call the service to know what it was they sent, i.e., the raw bytes. For example, let's say that instead of sending a well-formed XML document, they post the string "your mama" to my service endpoint. I want to see that that's what they did. Unfortunately using MessageBuffer::CreateBufferedCopy() won't work unless the contents of the message are already well-formed XML. Here's (roughly) what I already have in my implementation of AfterReceiveRequest: // The immediately following line raises an exception if the message // does not contain valid XML. This is uncool because I want // the raw bytes regardless of whether they are valid or not. using (MessageBuffer buffer = request.CreateBufferedCopy(Int32.MaxValue)) { using (MemoryStream stream = new MemoryStream()) using (StreamReader reader = new StreamReader(stream)) { buffer.WriteMessage(stream); stream.Position = 0; Trace.TraceInformation(reader.ReadToEnd()); } request = buffer.CreateMessage(); } My guess here is that I need to get at the raw request before it becomes a Message. This will most likely have to be done at a lower level in the WCF stack than an IDispatchMessageInspector. Anyone know how to do this?

    Read the article

  • Fetching Core Data for Tableview on iPhone - Tutorial leaves me with crashes when adding items to a

    - by Gordon Fontenot
    Been following the Core Data tutorial on Apple's developer site, and all is good until I have to add something to the fetched store. I am getting this error after a successful build and load when I try to add a new item to the list: Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Invalid update: invalid number of rows in section 0. The number of rows contained in an existing section after the update (0) must be equal to the number of rows contained in that section before the update (0), plus or minus the number of rows inserted or deleted from that section (1 inserted, 0 deleted). Due to the fact that the fetch goes through fine, and that if I replace the fetching with eventList = [[NSMutableArray alloc] init] it works as expected (without persistance, of course), I am led to believe that the problem comes from not creating the Mutable Array correctly. Here's the problematic part of the code: NSFetchRequest *request = [[NSFetchRequest alloc] init]; NSEntityDescription *entity = [NSEntityDescription entityForName:@"Event" inManagedObjectContext:managedObjectContext]; [request setEntity:entity]; NSSortDescriptor *sortDescriptor = [[NSSortDescriptor alloc] initWithKey:@"creationDate" ascending:NO]; NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:sortDescriptor, nil]; [request setSortDescriptors:sortDescriptors]; [sortDescriptors release]; [sortDescriptor release]; NSError *error; NSMutableArray *mutableFetchResults = [[managedObjectContext executeFetchRequest:request error:&error] mutableCopy]; if (mutableFetchResults = nil) { //Handle the error } [self setEventList:mutableFetchResults]; [mutableFetchResults release]; [request release]; I have tried switching the NSArrays in the second chunk out with NSMutableArrays, but I still get the same error. For reference, the section of code that is throwing the error when I try adding an entry is here: [eventList insertObject:event atIndex:0]; NSIndexPath *indexPath = [NSIndexPath indexPathForRow:0 inSection:0]; [self.tableView insertRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationFade]; [self.tableView scrollToRowAtIndexPath:[NSIndexPath indexPathForRow:0 inSection:0] atScrollPosition:UITableViewScrollPositionTop animated:YES]; it errors out at the insertRowsAtIndexPaths call. Thanks in advance for any help

    Read the article

  • PHP Error handling in WordPress plugin

    - by AaronM
    I am a newbie to both PHP and Wordpress (but do ok in C#), and am struggling to understand the error handling in a custom plugin I am attempting to write. The basics of the plugin is to query an exsiting MSSQL database (note its not the standard MYSQL db...) and return the rows back to the screen. This was working well, but the hosting provider has taken my database offline, which led me to the error handling problem (which I thought was ok). The following code is failing to connect to the database (as expected), but puts an error onto the screen and stops the page processing. It does not even output the 'or die' error text. QUESTION: How can I just output a simple "Cant load data" message, and continue on normally? function generateData() { global $post; if ("$post->post_title" == "Home") { try { $myServer = "<servername>"; $myUser = "<username>"; $myPass = "<password>"; $myDB = "<dbName>"; //connection to the database $dbhandle = mssql_connect($myServer, $myUser, $myPass) or die("Couldn't open database $myDB"); //... query processing here... } catch (Exception $e) { echo "Cannot load data<br />"; } } return $content; } Error being generated: (line 31 is $dbhandle = mssql_connect...) Warning: mssql_connect() [function.mssql-connect]: Unable to connect to server: <servername> in <file path> on line 31 Fatal error: Maximum execution time of 30 seconds exceeded in <file path> on line 31

    Read the article

  • Loading a class file immediately AFTER startup

    - by Striker
    We have a few war files deployed inside an ear file. Some of the war files have a class that caches static data from our PLM system in singletons. Since some of the classes take several minutes to load we use the load-on-startup in the web.xml to load them ahead of time. This all works fine until we attempt to re-deploy the application on our production servers. (WebLogic 10.3) We get an exception from our PLM API about a dll already being loaded. Our PLM vendor has confirmed that this is a problem and stated that they don't support using the load-on-startup. This is also a huge problem on our development boxes where we have redeploy the app all the time. Most of us, when we're not working on one of the apps that uses a cache, have them commented out. Obviously we can't do that for the production servers. Right now we transfer the ear to the production server, deploy it in the console, wait for it to crash, shut the app server instance down and then start it up again. We need to find a way around this... One suggestion was to create a servlet that we can call after the server boots that will load the various caches. While this will work I'm looking for something a bit cleaner. Is there anyway to detect once the server started and then fire off the methods? Thanks.

    Read the article

  • Can't access annotation property of subclassed uibutton

    - by Tzur Gazit
    I have a mapView to which I add annotations. The pin's callout have a button (rightCalloutAccessoryView). In order to be able to display various information when the button is pushed, i've subclassed uibutton and added a class called "Annotation". @interface CustomButton : UIButton { NSIndexPath *indexPath; Annotation *mAnnotation; } @property (nonatomic, retain) NSIndexPath *indexPath; @property (nonatomic, copy) Annotation *mAnnotation; - (id) setAnnotation2:(Annotation *)annotation; @end Here is "Annotation": @interface Annotation : NSObject <MKAnnotation> { CLLocationCoordinate2D coordinate; NSString *mPhotoID; NSString *mPhotoUrl; NSString *mPhotoName; NSString *mOwner; NSString *mAddress; } @property (nonatomic, assign) CLLocationCoordinate2D coordinate; @property (nonatomic, copy) NSString *mPhotoID; @property (nonatomic, copy) NSString *mPhotoUrl; @property (nonatomic, copy) NSString *mPhotoName; @property (nonatomic, copy) NSString *mOwner; @property (nonatomic, copy) NSString *mAddress; - (id) initWithCoordinates:(CLLocationCoordinate2D)coordinate; - (id) setPhotoId:(NSString *)id url:(NSString *)url owner:(NSString *)owner address:(NSString *)address andName:(NSString *)name; @end I want to set the annotation property of the uibutton at - (MKAnnotationView *)mapView:(MKMapView *)pMapView viewForAnnotation:(id )annotation, in order to refer to it at the button push handler (-(IBAction) showDetails:(id)sender). The problem is that I can't set the annotation property of the button. I get the following message at run time: 2010-04-27 08:15:11.781 HotLocations[487:207] *** -[UIButton setMAnnotation:]: unrecognized selector sent to instance 0x5063400 2010-04-27 08:15:11.781 HotLocations[487:207] *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[UIButton setMAnnotation:]: unrecognized selector sent to instance 0x5063400' 2010-04-27 08:15:11.781 HotLocations[487:207] Stack: ( 32080987, 2472563977, 32462907, 32032374, 31884994, 55885, 30695992, 30679095, 30662137, 30514190, 30553882, 30481385, 30479684, 30496027, 30588515, 63333386, 31865536, 31861832, 40171029, 40171226, 2846639 ) I appreciate the help. Tzur.

    Read the article

  • Can an interface define the signature of a c#-constructor

    - by happyclicker
    I have a .net-app that provides a mechanism to extend the app with plugins. Each plugin must implement a plugin-interface and must provide furthermore a constructor that receives one parameter (a resource context). During the instantiation of the plugin-class I look via reflection, if the needed constructor exists and if yes, I instantiate the class (via Reflection). If the constructor does not exists, I throw an exception that says that the plugin not could be created, because the desired constructor is not available. My question is, if there is a way to declare the signature of a constructor in the plugin-interface so that everyone that implements the plugin-interface must also provide a constructor with the desired signature. This would ease the creation of plugins. I don’t think that such a possibility exists because I think such a feature falls not in the main purpose for what interfaces were designed for but perhaps someone knows a statement that does this, something like: public interface IPlugin { ctor(IResourceContext resourceContext); int AnotherPluginFunction(); } I want to add that I don't want to change the constructor to be parameterless and then set the resource-context through a property, because this will make the creation of plugins much more complicated. The persons that write plugins are not persons with deep programming experience. The plugins are used to calculate statistical data that will be visualized by the app.

    Read the article

  • How do I exclude data from local table schema_migrations from being pushed to Heroku DB?

    - by Thierry Lam
    I was able to push my Ruby on Rails app with MySQL(local dev) to the Heroku server along with migrating my model with the command heroku rake db:migrate. I have also read the documentation on Database Import/Export. Is that doc referring to pushing actual data from my local dev DB to whichever Heroku's DB? Do I need to modify anything in the file database.yml to make it happen? I ran the following command: heroku db:push and I am getting the error: Sending data 2 tables, 3 records !!! Caught Server Exception | ETA: --:--:-- Taps Server Error: PGError ERROR: duplicate key value violates unique constraint "unique_schema_migrations" I have 2 tables, one I create for my app and the other schema_migrations. The total number of entries among the 2 tables is 3. I'm also printing the number of entries I have in the table I have created and it's showing 0. Any ideas what I might be missing or what I am doing wrong? EDIT: I figured out the above, Heroku's DB already have schema_migrations the moment I ran migrate. New question: Does anyone know how I can exclude data from a specific table from being pushed to Heroku DB. The table to exclude in this case will be schema_migrations. Not so good solution: I googled around and someone else was having the same issue. He suggested naming the schema_migrations table to zschema_migrations. In this way data from the other tables will be pushed properly until it fails on the last table. It's a pretty bad solution but will do for the time being. A better solution will be to use an existing Rails command which can reset a specific table from a database. I don't think Rake can do that.

    Read the article

  • How to read/write high-resolution (24-bit, 8 channel) .wav files in Java?

    - by dB'
    I'm trying to write a Java application that manipulates high resolution .wav files. I'm having trouble importing the audio data, i.e. converting the .wav file into an array of doubles. When I use a standard approach an exception is thrown. AudioFileFormat as = AudioSystem.getAudioFileFormat(new File("orig.wav")); --> javax.sound.sampled.UnsupportedAudioFileException: file is not a supported file type Here's the file format info according to soxi: dB$ soxi orig.wav soxi WARN wav: wave header missing FmtExt chunk Input File : 'orig.wav' Channels : 8 Sample Rate : 96000 Precision : 24-bit Duration : 00:00:03.16 = 303526 samples ~ 237.13 CDDA sectors File Size : 9.71M Bit Rate : 24.6M Sample Encoding: 32-bit Floating Point PCM Can anyone suggest the simplest method for getting this audio into Java? I've tried using a few techniques. As stated above, I've experimented with the Java AudioSystem (on both Mac and Windows). I've also tried using Andrew Greensted's WavFile class, but this also fails (WavFileException: Compression Code 3 not supported). One workaround is to convert the audio to 16 bits using sox (with the -b 16 flag), but this is suboptimal since it increases the noise floor. Incidentally, I've noticed that the file CAN be read by libsndfile. Is my best bet to write a jni wrapper around libsndfile, or can you suggest something quicker? Note that I don't need to play the audio, I just need to analyze it, manipulate it, and then write it out to a new .wav file. * UPDATE * I solved this problem by modifying Andrew Greensted's WavFile class. His original version only read files encoded as integer values ("format code 1"); my files were encoded as floats ("format code 3"), and that's what was causing the problem. I'll post the modified version of Greensted's code when I get a chance. In the meantime, if anyone wants it, send me a message.

    Read the article

  • Hibernate JDBCConnectionException: Communications link failure and java.io.EOFException: Can not read response from server

    - by Marc
    I get a quite well-known using MySql jdbc driver : JDBCConnectionException: Communications link failure, java.io.EOFException: Can not read response from server. This is caused by the wait_timeout parameter in my.cnf. So I decided to use c3p0 pool connection along with Hibernate. Here is what I added to hibernate.cfg.xml : <property name="hibernate.connection.provider_class">org.hibernate.connection.C3P0ConnectionProvider</property> <property name="c3p0.min_size">10</property> <property name="c3p0.max_size">100</property> <property name="c3p0.timeout">1000</property> <property name="c3p0.preferredTestQuery">SELECT 1</property> <property name="c3p0.acquire_increment">1</property> <property name="c3p0.idle_test_period">2</property> <property name="c3p0.max_statements">50</property> idle_test_period is volontarily low for test purposes. Looking at the mysql logs I can see the "SELECT 1" request which is regularly sent to the mysql server so it works. Unfortunately I still get this EOF exception within my app if I wait longer than 'wait_timout' seconds (set to 10 for test purposes). I'm using Hibernate 4.1.1 and mysql-jdbc-connector 5.1.18. So what am I doing wrong? Thanks, Marc.

    Read the article

  • Bizarre Javascript JSON undefined error

    - by Nate C-K
    I'm experiencing an error that I haven't been able to find any mention of anywhere. I'm developing an AJAX-enabled WCF web service with ASP.NET. In my ASP.NET master page's , I included the json.js file, copied fresh from json.org. When I run the page, it fails (VS 2008 catches a Javascript exception) on the first line of code in json.js (following lots of comments), which is: JSON = JSON || {}; The error says that JSON is undefined: Microsoft JScript runtime error: 'JSON' is undefined Well, duh! That's why the line is testing if it's defined and if so setting it to an empty object! It is supposed to be undefined, right? Last I heard it was not an error in Javascript to perform such an operation on an undefined variable. Can anyone give me a clue as to what's going on here? I suspect it's something gone wrong elsewhere that's somehow causing this problem. I don't have deep experience with either Javascript or ASP.NET so it might be that I'm missing some common gotcha in the setup.

    Read the article

  • The process cannot access the file because it is being used by another process

    - by Xenon
    I have an asp.net website and I allready did .Dispose() here is my code below; try { MailMessage newMail = new MailMessage(MailFrom, MailTo, MailSubject, MailMsg); if (MailAttachment != "") { Attachment data = new Attachment(MailAttachment, MediaTypeNames.Application.Octet); newMail.Attachments.Add(data); } newMail.BodyEncoding = System.Text.Encoding.UTF8; newMail.IsBodyHtml = true; SmtpClient client = new SmtpClient("192.168.2.205"); client.Credentials = CredentialCache.DefaultNetworkCredentials; client.Send(newMail); newMail.Attachments.Dispose(); newMail.Dispose(); DeleteAttachment(MailAttachment); lblSuccess.Text = "Basvurunuz alinmistir tesekkürler."; lblSuccess.Visible = true; ClearForm(); } catch (Exception ex) { lblSuccess.Text = ex.Message; //lblSuccess.Text = "Bir sorun olustu bir daha deneyiniz."; lblSuccess.Visible = true; } But i' m getting the same error, it' s running fine in my localhost but in server i' m getting this error. How can i fix it?

    Read the article

< Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >