Search Results

Search found 23576 results on 944 pages for 'case study'.

Page 411/944 | < Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >

• HP dv6000 laptop powers on only if plugged in

  - by Ben

  My HP dv6000 laptop will not run on battery power. It will only run while plugged into the wall. I have already replaced the battery, but it still will not operate on battery power. The problem began slowly. The original battery's life got shorter and shorter, until eventually it would only last ~45 seconds before going into hibernation. Finally, the battery would not work at all, so I threw it out and just used it without a battery. I bought a replacement recently.... but the problem persists. When I connect the new battery to the system, the "charging" light turns on for about 30 seconds, then goes dark. I'm assuming there's something wrong with the internal charging circuitry? If this is the case, how would I go about fixing this, short of buying a new motherboard? If anyone could give me some assistance in confirming/rejecting my diagnosis I'd be very appreciative! :)

  Read the article

• Best way to transfer files across unstable LAN?

  - by JamesTheAwesomeDude

  This is very similar to Question 326211, but in this case, the LAN is an unstable Wi-Fi connection. I need to transfer about 11 GiB of files between two computers, both running Linux (although one may be rebooted into Windows.) Their connection is both slow and unstable (due to Linux's awful Wi-Fi support,) but removable media (such as a flash drive or external hard drive) is not an option at this time. Right now, I'm slowly transferring the files, one by one, across SFTP, but I have to reconnect each computer approximately every 90 seconds, and the computers are not very close to each other, so this is not feasible. This is not a duplicate of Question 30186; that one specifically concerns Windows 7, and all the proposed solutions involve closed-source, Windows-only programs (which are all spyware IMHO, and are all off the table even if I trusted them - one of the computers is Linux-only.)

  Read the article

• how to find a text string which may be present in some unknown file in entire filesystem

  - by Registered User

  I am stuck up with a problem I have a line 'something' in some file. In which file is this line that I have forgotten. In the entire root file system I would like to find out which file and where is this line. So how can I go for this.I have used find but when I used find then I knew the name of file in this case I do not know name of file also. It is a Ubuntu server 10.04 So what can I do to find out which file has this string.

  Read the article

• Unit test SHA256 wrapper queries

  - by Sam Leach

  I am just beginning to write unit tests. So please bear with me. I have the following SHA256 wrapper. public static string SHA256(string plainText) { StringBuilder sb = new StringBuilder(); SHA256CryptoServiceProvider provider = new SHA256CryptoServiceProvider(); var hashedBytes = provider.ComputeHash(Encoding.UTF8.GetBytes(plainText)); for (int i = 0; i < hashedBytes.Length; i++) { sb.Append(hashedBytes[i].ToString("x2").ToLower()); } return sb.ToString(); } Do I want to be testing it? If so, what do you recommend? My thought process is as follows: What logic is there here. The answer is my for loop and ToString("x2") so from my understanding I want to be testing this part? I can assume Encoding.UTF8.GetBytes(plainText) works. Correct assumption? I can assume SHA256CryptoServiceProvider.ComputeHash() works. Correct assumption? I want to be only testing my logic. In this case is limited to the printing of hex encoded hash. Correct? Thanks.

  Read the article

• What solutions do I have to enforce memory limit on PHP server?

  - by Zulgrib

  I would like to enforce memory limit on a folder basis (and have it applied on subfolders) but I don't want the user able to change the memory limit. I know I can disable ini_set and I know I can enforce a hard limit or deny ini_set with Suhosin. With the first one, I doubt it will block changing it from the user.ini file, for the second, the user may still be able to change it to the hard limit I enforce with Suhosin. In both cases, I would prefer to not entierly block ini_set because it may have a legit use for other settings. In case it is important, I'm using PHP version 5.4.4 with nginx (PHP in FPM mode)

  Read the article

• can anyone help me through the preparation of Eclipse IDE for android developer in ubuntu 12.04?

  - by csbl

  I'm new to to Linux, in this particular case, to Ubuntu. I have a small android project I have to finnish until this Friday and I'm still stuck with the install and preparing of the development envrironment. The only thing I did was install the Eclipse IDE. I'm still missing the SDK, JAVA and anything else that might be needed. Can someone help me through this? It's only because I'm running out of time to develop, or else I would embarc on a deeper investigation of this OS. I tried the step to install android platforms, through Eclispe-Help-Install New Software, and I got the follwoing error messages, at the end of the process: [2012-06-06 17:35:56 - adb] /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] 'adb version' failed! /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] Failed to parse the output of 'adb version': Standard Output was: Error Output was: /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] 'adb version' failed! /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-06-06 17:35:56 - adb] Failed to parse the output of 'adb version': Standard Output was: Error Output was: /home/catia/android-sdks/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory Can anyone help, please??

  Read the article

• Using Exception Handler in an ADF Task Flow

  - by anmprs

  Problem Statement: Exception thrown in a task flow gets wrapped in an exception that gives an unintelligible error message to the user. Figure 1 Solution 1. Over-writing the error message with a user-friendly error message. Figure 2 Steps to code 1. Generating an exception: Write a method that throws an exception and drop it in the task flow.2. Adding an Exception Handler: Write a method (example below) to overwrite the Error in the bean or data control and drop the method in the task flow. Figure 3 This method is marked as the Exception Handler by Right-Click on method > Mark Activity> Exception Handler or by the button that is displayed in this screenshot Figure 4 The Final task flow should look like this. This will overwrite the exception with the error message in figure 2. Note: There is no need for a control flow between the two method calls (as shown below). Figure 5 Solution 2: Re-Routing the task flow to display an error page Figure 6 Steps to code 1. This is the same as step 1 of solution 1.2. Adding an Exception Handler: The Exception handler is not always a method; in this case it is implemented on a task flow return.  The task flow looks like this. Figure 7 In the figure below you will notice that the task flow return points to a control flow ‘error’ in the calling task flow. Figure 8 This control flow in turn goes to a view ‘error.jsff’ which contains the error message that one wishes to display.  This can be seen in the figure below. (‘withErrorHandling’ is a  call to the task flow in figure 7) Figure 9

  Read the article

• Needs free/ opensource network monitoring tool for office LAN

  - by Amit Ranjan

  I know there must be a lot similar questions on SU. Let me explain my setup first. I have 4-5 PC, Laptops and Few Android Phones in my office. To get them on a network , I have a UTStarCom, WA3002G1 ADSL2+ router with a landline broadband connection which has nothing to do with any PC except the configuration settings. Broadband channel is always on, we need to switch on the router and the internet is ready for us. No Internet Connection sharing is done via any PC. I have a limited 20GB monthly plan, which is consumed in 10-20 days, depending upon the download requirements. So in the above case, i need some suggestions from you: How do I monitor my Internet Bandwidth along-with the connected systems, realtime? Any free opensource tool available? Tweaks / Changes in PC to save bandwidth as my ISP do not have any Unlimited plan. PC and Laptops are Windows XP and/Or windows 7. Either of the platform tools are welcome.

  Read the article

• unknown module in my server to get PHP errors in HTML tables

  - by Javier Novoa C.

  Sorry to ask this... I manage Apache and PHP in my computer. But having installed a lot of things, I've lost track of some of them. (Things I find really useful to have at my job, or to restore in case of emergency). The problem is that I have installed this thing which displays PHP errors in a nice and colored html table, but can't remember what I have installed or configured to get it work like it. Can you give me a hint about it? I'm using Debian Lenny, Apache 2.2 and PHP 5.2 Here's a screenshot: Thank you very much for reading. Javier

  Read the article

• Generating Deep Arrays: Shallow to Deep, Deep to Shallow or Bad idea?

  - by MobyD

  I'm working on an array structure that will be used as the data source for a report template in a web app. The data comes from relatively complex SQL queries that return one or many rows as one dimensional associative arrays. In the case of many, they are turned into two dimensional indexed array. The data is complex and in some cases there is a lot of it. To save trips to the database (which are extremely expensive in this scenario) I'm attempting to get all of the basic arrays (1 and 2 dimension raw database data) and put them, conditionally, into a single, five level deep array. Organizing the data in PHP seems like a better idea than by using where statements in the SQL. Array Structure Array of years( year => array of types( types => array of information( total => value, table => array of data( index => db array ) ) ) ) My first question is, is this a bad idea. Are arrays like this appropriate for this situation? If this would work, how should I go about populating it? My initial thought was shallow to deep, but the more I work on this, the more I realize that it'd be very difficult to abstract out the conditionals that determine where each item goes in the array. So it seems that starting from the most deeply nested data may be the approach I should take. If this is array abuse, what alternatives exist?

  Read the article

• How to edit semi-plaintext file and maintaining character structure?

  - by Raul

  I am using a software (Groupmail from Infacta) that uses exact / absolute %PATHS% for saving some settings in specific semi-plaintext file. This is a really bad idea because you can't move to USER folder, or like my case it does not work after migrating to a new computer with different language. For example: C:\Documents and Settings\USER\Local Settings\Application Data\Infacta is different than C:\Documents and Settings\USER\Configuración local\Datos de programa\Infacta Obviously, the software does not work well. I tried to solve this using Find/Replace the new PATH with Notepad++. While the Groupmail software loads well and shows settings correctly, the software fails when trying to save data on that file. I guess this is because length or number of replaced characters is different and also it corrupt the file. Please could you help me to edit this file maintaining file integrity / structure?

  Read the article

• Help with IPTables - Masquerading + Forwarding, 1-to-1?

  - by Artiom Chilaru

  I've got a clean Ubuntu Server 10.10 with OpenSSH, OpenVPN and vsFTPd installed. The server is running as a VM on the Hyper-V server (hypervisor), has two network interfaces mapped to physical adapters (eth0 and eth1), and a virtual interface with a direct connection to the hypervisor (eth2). The VPN will create a tun0 interface when a client connects. What I want is the remote user, connecting over VPN to be able to connect to the hypervisor (all ports, ping etc). The initial idea was to make the VPN create a tap0 interface, and bridge eth2 to tap0, but this didn't work, unfortunately, as it seems that the adapters don't want to go into promiscuous mode (partially confirmed by MS) At the same time, both the hypervisor and the remove client over VPN can successfully ping/connect to the ubuntu server with no problems. So my plan right now is to try doing some 1-1 masquerading, if possible. Basically, I want every request sent from the VPN client to the ubuntu server to be redurected to the hypervisor instead (with IP translation ofc), and every request from the hypervisor to the ubuntu machine sent to the VPN client (IP translated too). Only 1 client will be connected at a time to the VPN, so I can force limit it to a single IP at all times, if necessary. Is this the right way to go, and if true, how can this be achieved? It's almost like a special case of port-forwarding, except every single port on tun0 is forwarded to a machine in eth2, and every port on the eth2 side forwards to an ip on tun0 I guess it could be done with iptables, but I'm rather new in linux, so I can't do it myself... help? :(

  Read the article

• Using an Apt Repository for Paid Software Updates

  - by Scott Warren

  I'm trying to determine a way to distribute software updates for a hosted/on-site web application that may have weekly and/or monthly updates. I don't want the customers who use the on-site product to have to worry about updating it manually I just want it to download and install automatically ala Google Chrome. I'm planning on providing an OVF file with Ubuntu and the software installed and configured. My first thought on how to distributed software is to create six Apt repositories/channels (not sure which would be better at this point) that will be accessed through SSH using keys so if a customer doesn't renew their subscription we can disable their account: Beta - Used internally on test data to check the package for major defects. Internal - Used internally on live data to check the package for defects (dog fooding stage). External 1 - Deployed to 1% of our user base (randomly selected) to check for defects. External 9 - Deployed to 9% of our user base (randomly selected) to check for defects. External 90 - Deployed to the remaining 90% of users. Hosted - Deployed to the hosted environment. It will take a sign off at each stage to move into the next repository in case problems are reported. My questions to the community are: Has anyone tried something like this before? Can anyone see a downside to this type of a procedure? Is there a better way?

  Read the article

• What is the best practice for when to check if something needs to be done?

  - by changokun

  Let's say I have a function that does x. I pass it a variable, and if the variable is not null, it does some action. And I have an array of variables and I'm going to run this function on each one. Inside the function, it seems like a good practice is to check if the argument is null before proceeding. A null argument is not an error, it just causes an early return. I could loop through the array and pass each value to the function, and the function will work great. Is there any value to checking if the var is null and only calling the function if it is not null during the loop? This doubles up on the checking for null, but: Is there any gained value? Is there any gain on not calling a function? Any readability gain on the loop in the parent code? For the sake of my question, let's assume that checking for null will always be the case. I can see how checking for some object property might change over time, which makes the first check a bad idea. Pseudo code example: for(thing in array) { x(thing) } Versus: for(thing in array) { if(thing not null) x(thing) } If there are language-specific concerns, I'm a web developer working in PHP and JavaScript.

  Read the article

• Mac Disk-Utility input/output error

  - by Michelle

  a couple of other people have posted about this but my specific problem has not been addressed. For months I have been backing up DVDs and home movies with no problem then all of a sudden I get an "input/output" error. Yes I have cleaned the disks. Actually I have tried 8 different ones - they are not all bad so its obviously my computer. I have done a scan and cleaned up the HD a bit just in case but nothing is helping. I don't want to download other programs since this one works but seems to be having a problem. Any ideas?

  Read the article

• Is this kind of Design by Contract useless?

  - by Charlie Pigarelli

  I've just started informatics university and I'm attending a programming course about C(++). The programming professor prefers to teach very few things (in 3 month we have just reached the functions topic) and connect every topic with a type of programming design that somehow is similar to the Design by Contract design. Basically what he ask us to do is to write every exercise with comments Pre-conditions, Post-conditions and Invariants that should prove the correctness of each program we write. But this doesn't make any sense to me. I mean, ok: maybe writing down your thoughts prevent you from doing some mistakes, but if this is all an abstract thing, then if your program intuition is wrong you'll write your program wrong and then you'll also write pre and post conditions wrong probably auto convincing your self about its correctness. Most of the time, both me and other students have written programs that seemed ok and that had correct pre and post condition too. But at the moment of testing it was just completely wrong. I had some experience before this course of programming and I had written a lot of line of code before and I found myself comfortably with just writing a program and unit test it. It take less time to accomplish and is less "abstract" than just thinking about what every single piece of your program should do in every case (which is kinda like mentally testing it). Finally, all this pre and post conditions takes me like 80% of the total time of the exercise. It's harder to think about putting down this pre and post correct than to write the program itself. Since we are like the only course of the only university probably in the entire world that makes this things, could someone please tell me how should I manage this thing? Am I right thinking that this doesn't worth anything? Should I change university? (there are like double of the people attending that course and it seems that usually very few people passes the exam the first year). Should I convince myself it's method is right?

  Read the article

• Disable laptop's display on boot when used with external display

  - by Ryan

  I keep my laptop tucked away and solely use an external display with it via HDMI. In Windows 7 display settings, I have it set up to "Show desktop only on 2 [my external display]" This works fine in all cases except when I boot the laptop when the external display is already connected. In that case, the laptop's display stays on and sticks at the Windows 7 boot logo unless I manually shut the display off. (I should mention that while the laptop's display is stuck at the boot logo, the external monitor and computer are running just fine.) The laptop is an Asus N56VZ with Nvidia 650m graphics and the latest drivers. I've checked Nvidia's control panel as well as the BIOS and nothing looked very promising. Any ideas as to how I can get my laptop screen to shut itself off after booting into Windows?

  Read the article

• Qualcomm Gobi WWAN modem no longer appears in Network Manager

  - by Andy E

  Not sure what happened here. I installed Cinnamon on my Ubuntu 12.10 environment yesterday, rebooted when finished and everything was working fine. I even used my WWAN modem after my fixed line broadband went down. However, after starting my machine this morning and seeing that my fixed line is still having problems (intermittently), I clicked the network applet and my WWAN device wasn't listed. It's not in the main network manager window either. It is still present on the system, however: $ lsusb Bus 001 Device 003: ID 05ca:18b0 Ricoh Co., Ltd Sony Vaio Integrated Webcam Bus 001 Device 004: ID 05c6:9221 Qualcomm, Inc. Gobi Wireless Modem (QDL mode) Bus 002 Device 005: ID 04e8:6865 Samsung Electronics Co., Ltd Bus 002 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub Bus 003 Device 002: ID 147e:1000 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 008 Device 002: ID 044e:3017 Alps Electric Co., Ltd BCM2046 Bluetooth Device Debug output from modem-manager, refers to a device that is blacklisted: modem-manager[10186]: [1355478137.024491] [mm-manager.c:866] device_added(): (tty/ttyUSB0): port's parent device is blacklisted modem-manager[10186]: [1355478137.024607] [mm-manager.c:875] device_added(): (tty/ttyS0): port's parent platform driver is not whitelisted modem-manager[10186]: [1355478137.024700] [mm-manager.c:875] device_added(): (tty/ttyS1): port's parent platform driver is not whitelisted ... I couldn't see anything relevant in the debug output for network-manager, but I've created a paste for it just in case. In /lib/udev/rules.d/77-mm-qdl-device-blacklist.rules, I found the following line that matches the device IDs from the lsusb output: # Generic Gobi QDL device ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9221", ENV{ID_MM_DEVICE_IGNORE}="1" I tried commenting out the second line and restarting network-manager/modem-manager but it didn't help. I've no idea where to go from here, does anyone else have any ideas?

  Read the article

• Are very short or abbreviated method/function names that don't use full words bad practice or a matter of style.

  - by Alb

  Is there nowadays any case for brevity over clarity with method names? Tonight I came across the Python method repr() which seems like a bad name for a method to me. It's not an English word. It apparently is an abbreviation of 'representation' and even if you can deduce that, it still doesn't tell you what the method does. A good method name is subjective to a certain degree, but I had assumed that modern best practices agreed that names should be at least full words and descriptive enough to reveal enough about the method that you would easily find one when looking for it. Method names made from words help let your code read like English. repr() seems to have no advantages as a name other than being short and IDE auto-complete makes this a non-issue. An additional reason given in an answer is that python names are brief so that you can do many things on one line. Surely the better way is to just extract the many things to their own function, and repeat until lines are not too long. Are these just a hangover from the unix way of doing things? Commands with names like ls, rm, ps and du (if you could call those names) were hard to find and hard to remember. I know that the everyday usage of commands such as these is different than methods in code so the matter of whether those are bad names is a different matter.

  Read the article

• How to create per-vertex normals when reusing vertex data?

  - by Chris Smith

  I am displaying a cube using a vertex buffer object (gl.ELEMENT_ARRAY_BUFFER). This allows me to specify vertex indicies, rather than having duplicate vertexes. In the case of displaying a simple cube, this means I only need to have eight vertices total. Opposed to needing three vertices per triangle, times two triangles per face, times six faces. Sound correct so far? My question is, how do I now deal with vertex attribute data such as color, texture coordinates, and normals when reusing vertices using the vertex buffer object? If I am reusing the same vertex data in my indexed vertex buffer, how can I differentiate when vertex X is used as part of the cube's front face versus the cube's left face? In both cases I would like the surface normal and texture coordinates to be different. I understand I could average the surface normal, however I would like to render a cube. Also, this still doesn't work for texture coordinates. Is there a way to save memory using a vertex buffer object while being able to provide different vertex attribute data based on context? (Per-triangle would be idea.) Or should I just duplicate each vertex for each context in which it gets rendered. (So there is a one-to-one mapping between vertex, normal, color, etc.) Note: I'm using OpenGL ES.

  Read the article

• Looking for a software to keep track of backup media

  - by Tarnschaf

  Hi, I am looking for a software that allows me to enter my used backup media (e.g. DVD1, DVD2) my backed-up assets in high-level (such as "family-photos from 2003", "laptop drivers") details of the assets ("Ninas Birthday 2003") where the backup media is currently stored when the media has been burned (to re-burn in case of media degeneration) Of course it should be possible to navigate from media to assets and backwards. I also thought about marking assets as "deprecated". If all assets on a media are deprecated, the program should tell me so I don't have to keep it any more. Does anybody know a program with this feature-set or will I have to start my own in say Access?

  Read the article

• How to install SIP+PyQt with apt-get + pip + virtualenv?

  - by kjo

  [I originally posted this question, under a different title, in StackOverflow (here), but later I realized that my problem is very specific to apt-get, hence I am re-posting it here. Sorry for the duplication.] I'm trying to install PyQt on Ubuntu (and within a virtualenv). The list of obstacles I'm dealing with is far too long to include here, but the one I'm currently trying to get past is this: % workon myvenv (myvenv)% cd ~/.virtualenvs/myvenv/build/pyqt (myvenv)% python ./configure.py Traceback (most recent call last): File "./configure.py", line 32, in <module> import sipconfig OK, so let's install sipconfig... (myvenv)% pip install SIP Downloading/unpacking SIP Downloading sip-4.14.8-snapshot-02bdf6cc32c1.zip (848Kb): 848Kb downloaded Running setup.py egg_info for package SIP Traceback (most recent call last): File "<string>", line 14, in <module> IOError: [Errno 2] No such file or directory: '/home/yt/.virtualenvs/myvenv/build/SIP/setup.py' Complete output from command python setup.py egg_info: Traceback (most recent call last): File "<string>", line 14, in <module> IOError: [Errno 2] No such file or directory: '/home/yt/.virtualenvs/myvenv/build/SIP/setup.py' ---------------------------------------- Command python setup.py egg_info failed with error code 1 in /home/yt/.virtualenvs/myvenv/build/SIP Storing complete log in /home/yt/.pip/pip.log The only recipe I've found so far installing SIP is this % python configure.py % make % sudo make install ...but this recipe goes against my policy of doing all my Ubuntu installations either through apt-get (or through pip in the case of Python modules). Is there some way that I can install SIP with apt-get (and possibly pip)?

  Read the article

• Tuning B2B Server Engine Threads in SOA Suite 11g

  - by Shub Lahiri, A-Team

  Background B2B 11g has a number of parameters that can be tweaked to tune the engine for handling high volumes of messages. These parameters are also known as B2B server properties and managed via the EM console.  This note highlights one aspect of the tuning exercise and describes the different threads, that can be configured to tune the performance of a B2B server. Symptoms The most common indicator of a B2B engine in need of a tuning is reflected in the constant build-up of messages in an internal JMS queue within the B2B server. It is called B2B_EVENT_QUEUE and can be monitored via the Weblogic server console. Whenever such a behaviour is seen, it usually results in general degradation of performance. Remedy There could be many contributing factors behind a B2B server's degradation of performance. However, one of the first places to tune the server from the out-of-the-box, default configuration is to change the number of internal engine threads allocated within the B2B server. Usually the default configuration for the B2B server engine threads is not suitable for high-volume of messaging loads. So, it is necessary to increase the counts for 3 types of such threads, by specifying the appropriate B2B server properties via the EM console, namely, Inbound - b2b.inboundThreadCount Outbound - b2b.outboundThreadCount Default - b2b.defaultThreadCount The function of these threads are fairly self-explanatory. In other words, the inbound threads process the inbound messages that are coming into the B2B server from an external endpoint. Similarly, the outbound threads processes the messages that are sent out from the B2B server. The default threads are responsible for certain B2B server-specific special tasks. In case the inbound and outbound thread counts are not specified, the default thread count also dictates the total number of inbound and outbound threads. As found in any tuning exercise, the optimisation of these threads is usually reached via an iterative process. The best working combination of the thread counts are directly related to the system infrastructure, traffic load and several other environmental factors.

  Read the article

• rkhunter: right way to handle warnings further?

  - by zuba

  I googled some and checked out two first links it found: http://www.skullbox.net/rkhunter.php http://www.techerator.com/2011/07/how-to-detect-rootkits-in-linux-with-rkhunter/ They don't mention what shall I do in case of such warnings: Warning: The command '/bin/which' has been replaced by a script: /bin/which: POSIX shell script text executable Warning: The command '/usr/sbin/adduser' has been replaced by a script: /usr/sbin/adduser: a /usr/bin/perl script text executable Warning: The command '/usr/bin/ldd' has been replaced by a script: /usr/bin/ldd: Bourne-Again shell script text executable Warning: The file properties have changed: File: /usr/bin/lynx Current hash: 95e81c36428c9d955e8915a7b551b1ffed2c3f28 Stored hash : a46af7e4154a96d926a0f32790181eabf02c60a4 Q1: Is there more extended HowTos which explain how to deal with different kind warnings? And the second question. Were my actions sufficient to resolve these warnings? a) To find the package which contains the suspicious file, e.g. it is debianutils for the file /bin/which ~ > dpkg -S /bin/which debianutils: /bin/which b) To check the debianutils package checksums: ~ > debsums debianutils /bin/run-parts OK /bin/tempfile OK /bin/which OK /sbin/installkernel OK /usr/bin/savelog OK /usr/sbin/add-shell OK /usr/sbin/remove-shell OK /usr/share/man/man1/which.1.gz OK /usr/share/man/man1/tempfile.1.gz OK /usr/share/man/man8/savelog.8.gz OK /usr/share/man/man8/add-shell.8.gz OK /usr/share/man/man8/remove-shell.8.gz OK /usr/share/man/man8/run-parts.8.gz OK /usr/share/man/man8/installkernel.8.gz OK /usr/share/man/fr/man1/which.1.gz OK /usr/share/man/fr/man1/tempfile.1.gz OK /usr/share/man/fr/man8/remove-shell.8.gz OK /usr/share/man/fr/man8/run-parts.8.gz OK /usr/share/man/fr/man8/savelog.8.gz OK /usr/share/man/fr/man8/add-shell.8.gz OK /usr/share/man/fr/man8/installkernel.8.gz OK /usr/share/doc/debianutils/copyright OK /usr/share/doc/debianutils/changelog.gz OK /usr/share/doc/debianutils/README.shells.gz OK /usr/share/debianutils/shells OK c) To relax about /bin/which as I see OK /bin/which OK d) To put the file /bin/which to /etc/rkhunter.conf as SCRIPTWHITELIST="/bin/which" e) For warnings as for the file /usr/bin/lynx I update checksum with rkhunter --propupd /usr/bin/lynx.cur Q2: Do I resolve such warnings right way?

  Read the article

• Which shopping cart / ecommerce platform to choose?

  - by fabien7474

  I need to build an ecommerce website within a tight budget and schedule. Of course, I have never done that before, so I have googled out what my solutions are and I have concluded that the following were not valid candidates anymore : Magento : Steep learning curve osCommerce : old, bad design, buggy and not user-friendly Zencart, CRE Loaded, CubeCart : based on osCommerce Virtuemart, uberCart, eCart : based on CMS (Joomal, Drupal, WordPress) that is not necessary for my use-case So I finally narrowed down my choices to these solutions : PrestaShop : easy-to-use, great templating engine (smarty) but many modules are not free buy yet indispensable OpenCart : security issues and not a great support from the main developer. See here and here. So, as you can see, I am a little bit confused and if you can help me choosing an easy-to-use, lightweight and cheap (not-necessarily free) ecommerce solution, I would really appreciate. By the way, I am a Java/Grails programmer but I am also familiar with PHP and .NET. (not with Python or Ruby/Rails) EDIT: It seems that this question is more appropriate for the Webmaster StackExchange site. So please move this question to where it belongs (I cannot do that) instead of downvoting it. BTW, I have found out a question quite similar on SO (http://stackoverflow.com/questions/3315638/php-ecommerce-system-which-one-is-easiest-to-modify) which is quite popular.

  Read the article

< Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >