Search Results

Search found 37604 results on 1505 pages for 'build script'.

Page 412/1505 | < Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >

  • How to send current of line of code to terminal input in gedit 2013?

    - by Thomas Ng
    I just switched to ubuntu. I want to use R and I am using gedit to write R script. When I was using Mac, I was able to use run a R script line by line. However, I have no idea how to do this now in gedit. I notice someone said it was impossible to do so How can I send current line in gedit to terminal?, but that was 2 years ago. And recently, I saw people doing it on youtube. http://www.youtube.com/watch?v=4jJDkcEs5yw

    Read the article

  • memory and time intensive php task

    - by Goddard
    Sorry if this question has been asked before, but I couldn't find anything usable. I'm working on a project for a client and currently I have to loop through the users table which is about 3000 records and still growing. I have to do some calculations on a nightly basis which I am going to be using cron/php. The calculations script uses about 3.5mb of memory and takes about 1 second to run. When loading individual users my current php setup handles this fine, but if I try and loop through the user list my php script execution time runs out. I've read after doing some searching that I can make the page reload itself after each user calculation and just keep my previous place in the loop and this sounds like a good idea, but I wanted to hear some opinions from others that have handled similar situations and how you handled these types of tasks. Thanks.

    Read the article

  • Starting small custom development company, type of niches to target?

    - by Rick
    This is kind of a new years thing for me as I want to be more entrepreneurial going forward with programming and this is kind of a general question for anyone who may share the same ambitions as me. I have experience with web programming and, although I work full time for a company doing programming, I have some freelance programmers that I work with / employ for small projects. I want to see about taking things to the next level as far as building a small company doing custom development. I'm just not sure how to figure out what niches to target as far as what type of apps to build as demos, etc. I was thinking mobile (maybe Android or Iphone) but am just curious if anyone has any advice / resources. A lot of "web development" seems to end up being just using a CMS like Joomla or Wordpress, for smaller sites, so I want to figure a way to steer clear of this crowd and find some opportunity with companies / entrepreneurs who actually need real programming development done to build apps. Thanks for any advice

    Read the article

  • What "version naming convention" do you use?

    - by rjstelling
    Are different version naming conventions suited to different projects? What do you use and why? Personally, I prefer a build number in hexadecimal (e.g 11BCF), this should be incremented very regularly. And then for customers a simple 3 digit version number, i.e. 1.1.3. 1.2.3 (11BCF) <- Build number, should correspond with a revision in source control ^ ^ ^ | | | | | +--- Minor bugs, spelling mistakes, etc. | +----- Minor features, major bug fixes, etc. +------- Major version, UX changes, file format changes, etc.

    Read the article

  • Ask the Readers: How Do You Organize a Messy Music Collection?

    - by Jason Fitzpatrick
    What do you do when you’re faced with a massive pile of MP3s with mismatched tags, poor directory structure, or worse? This week we want to hear your best tips and tricks for getting out from under a mismanaged music collection. Whether iTunes went nuts and poorly tagged your existing collection on import, it was never very tidy to begin with, or you’ve got a hot mess of mismashed music from your internet travels, we want to hear how you’ve rectified the situation. What tools, tips, and tricks do you use to turn your messy pile of MP3s into a neatly organized music collection? Sound off in the comments and check back on Friday for the What You Said roundup! How to Sync Your Media Across Your Entire House with XBMC How to Own Your Own Website (Even If You Can’t Build One) Pt 2 How to Own Your Own Website (Even If You Can’t Build One) Pt 1

    Read the article

  • How can I prototype my app better?

    - by uber_llama
    A few weeks ago I saw a story about a master app designer showing how he worked with good old pen and paper to do effective prototyping before writing code. I'm unable to dig up that story (and I think it was a video) but if you could recommend any other useful resources I'd appreciate them. I know roughly what I want to build, but want a useful framework for thinking about how the screens should flow together. The app I want to build is for the iOS platform, but I think the video might have been about creating a web app. Thanks!

    Read the article

  • dpkg reports error on package icaclient

    - by Photonics1
    I installed the icaclient (it's a client for Citrix) a while back. I don't exactly remember what I did to get it working but it was enervating. I had to install some old packages not even avaiable for ubuntu (12.04) and in the end I used some stuff from old rpms. Anyway the client is more or less working now but I always get a dpkg error when installing or updating something. The (translated) error message is something like: dpkg: Error while processing icaclient:i386 (--configure): subprocess installed post-installation-script return errorcode 2 I just want to tell dpkg to ignore this or remove this post-install-script but I don't know how. Thanks!

    Read the article

  • Who makes laptops for Ubuntu?

    - by Tim Lytle
    I'm looking for a laptop and would like to avoid the whole 'is this [specific configuration of hardware] compatible with Ubuntu?' process by finding a laptop manufactured with Ubuntu in mind. I know of system76, but are there any other manufacturers making laptops built to run a standard build of Ubuntu? I'm not counting Dell, as - from my experience - their 'Ubuntu' laptops/netbooks require their build, and because of that have their own set of compatibility issues. UPDATE: And as mentioned in the comments, Dell is no longer selling systems with Ubuntu to consumers.

    Read the article

  • Fixing a bug while working on a different part of the code base

    - by imgx64
    This happened at least once to me. I'm working on some part of the code base and find a small bug in a different part, and the bug stops me from completing what I'm currently trying to do. Fixing the bug could be as simple as changing a single statement. What do you do in that situation? Fix the bug and commit it together with your current work Save your current work elsewhere, fix the bug in a separate commit, then continue your work [1] Continue what you're supposed to do, commit the code (even if it breaks the build fails some tests), then fix the bug (and the build make tests pass) in a separate commit [1] In practice, this would mean: clone the original repository elsewhere, fix the bug, commit/push the changes, pull the commit to the repository you're working on, merge the changes, and continue your work. Edit: I changed number three to reflect what I really meant.

    Read the article

  • How would I know if my OS is compromised?

    - by itsols
    I had opened a php folder from a friend's web host. I run it on mine to fix some bugs. Then I tried attaching the code to be emailed and GMAIL stated that the attachment was infected by a virus. Now I'm afraid if my Apache or OS (12.04) is infected. I checked the php files and found a base64 encoded set of code being 'eval'd at the top of each and every php file. Just reversing it (echo with htmlspecialchars) showed some clue that there were sockets in use and something to do with permissions. And also there were two websites referred having .ru extensions. Now I'm afraid if my Ubuntu system is affected or compromised. Any advice please! Here's my second run of rkhunter with the options: sudo rkhunter --check --rwo Warning: The command '/usr/bin/unhide.rb' has been replaced by a script: /usr/bin/unhide.rb: Ruby script, ASCII text Warning: Hidden directory found: /dev/.udev Warning: Hidden file found: /dev/.initramfs: symbolic link to `/run/initramfs'

    Read the article

  • problem in installing binutils

    - by user3667930
    when am trying to install mspgcc on ubuntu 14.04 version am getting an error at "make" during installation of binutils... following are the commands i used.. sir please help me in fixing this error.Thanks in advance.. wget http://ftpmirror.gnu.org/binutils/binutils-2.21.1a.tar.bz2 tar xvfj binutils-2.21.1a.tar.bz2 cd binutils-2.21.1 patch -p1 < ../mspgcc-20120406/msp430-binutils-2.21.1a-20120406.patch cd .. mkdir -p BUILD/binutils cd BUILD/binutils ../../binutils-2.21.1/configure --target=msp430 --program-prefix="msp430-" --with-mpfr-include=/usr/local/include -with-mpfr-lib=/usr/local/lib --with-gmp-include=/usr/local/include -with-gmp-lib=/usr/local/lib --with-mpc-include=/usr/local/include -with-mpc-lib=/usr/local/lib make -j 4 sudo make install cd ../..

    Read the article

  • How do I create a game that runs on Windows, iOS and Android?

    - by AspaApps
    I use C++ to create windows games and now I want to step into another other OS like Android or iOS. I'm totally familiar with C++ so I tried to create app for iOS using objective C it was working awesome. However, I also want to publish games for Android but not by using Java. I don't want to create a single game 5-6 times for other platforms. Is their any way that if I create game for Windows then it will work in Android and iOS ? Or should I use Action Script 3.0? If I use action script 3.0, will it require Flash player to run the game in Windows, Android, iOS?

    Read the article

  • Character equipment combinations

    - by JimFing
    I'm developing a 2d isometric game (typical Tolkien RPG) and wondering how to handle character/equipment combinations. So for example, the player wears leather boots with chain-mail and a wooden shield and a sword - but then picks up plate-armour instead of chain-mail. I'm using Blender3D to create objects, environments and characters in 3D, then a script runs to render all 3D meshes into 2D orthographic tile maps. So I can use this script to create all the combinations of character equipment for me, but there would be an explosion in terms of the combinations required.

    Read the article

  • Attempting to GREP details of a Java error

    - by BOMEz
    I'm running Ubuntu 11 and I'm having some issues with grep. I have a shell script (see below) which essentially checks if a certain Java program of mine is running, if not it runs it. That part works out great! If my Java application throws any kind of exception however I would like to capture that information and email it to myself. How can I go about checking to see if the call to java -jar /bin/MyApp.jar fails? I tried piping it to grep, but that doesn't seem to work. Below is the full script that I've written: #Check if MyApp.jar is running, if not run it. if [ $(ps aux | grep 'java' | grep -v grep | wc -l | tr -s "\n") -eq 0 ] then echo "PacketCapture Starting...\n" java -jar /bin/MyApp.jar echo "PacketCapture Started.\n" else echo "PacketCapture already running.\n" fi

    Read the article

  • grub2 update-grub puts wrong UUID in grub.cfg for system with separate /, /boot and /home partitions

    - by keepitsimpleengineer
    It is putting in the UUID for the boot partition and not the / (root) partition. It's grub2 (1.99-21ubuntu3.1) on Xubuntu 12.04. UPDATE: ? I ran Boot Info Script 0.60, here are results? The boot info script is too big for askubuntu, but is here. The system not booting is on /dev/sdh. The booted disk, Xubuntu 12.04, is /dev/sdb. /sdh2/etc/fstab is at line 1073. The incorrect UUIDs are at line 945 and 954. "blkid" putput is at line 318. It is putting the UUID for "boot" versus "root" in boot.cfg, line 937. I have noticed that the relationship between physical drives and names in /dev vary depending on which system is booted.

    Read the article

  • Where can I get fresh new Wine DLLs?

    - by SuperScript
    I was acting careless today and I accidentally deleted one of the .dlls in my Ubuntu Wine installation, ~/.wine/drive_c/windows/system32/ole32.dll to be exact, and need a new fresh copy of only this one .dll. I know that reinstalling will fix it, but I have installed quite a few programs and do not want to have to do such a drastic thing just to fix this one problem. So, I'm wondering if there is somewhere that I can download this original .dll as it came with my original Wine installation. I have found the SourceForge repository, but it only has .h and .c files and I do not know how to build them into a .dll. Can anyone give me a link to download, or instructions to build my missing .dlls?

    Read the article

  • Polipo dpkg failure problem [closed]

    - by ICXC
    Possible Duplicate: polipo E: Sub-process /usr/bin/dpkg returned an error code (1) This is the error I get each time I try to install polipo with the command apt-get install polipo or when I try to install it from Ubuntu software center: Starting polipo: Couldn't open config file /etc/polipo/config: 2. invoke-rc.d: initscript polipo, action "start" failed. dpkg: error processing polipo (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: polipo Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) Setting up polipo (1.0.4.1-1.1) ... Starting polipo: Couldn't open config file /etc/polipo/config: 2. invoke-rc.d: initscript polipo, action "start" failed. dpkg: error processing polipo (--configure): subprocess installed post-installation script returned error exit status 1 How can I solve this?

    Read the article

  • New CodePlex Project&ndash;SPDeployRetract

    - by PointsToShare
    I have just finished a new CodePlex project named SPDeployRetract. This is a sophisticated PowerShell script that allows you to to deploy solutions and InfoPath forms with ease. It is especially beneficial because once you set up the instructions in the xml input, you can repeat the process in farm after farm without error. The script also allows for easy retraction. You may always retract the last deployment by setting the instructions to do so. This is possible because every action taken is recorded and old versions of each WSP are backed up for redeployment. Look it up in: http://spdeployretract.codeplex.com/ That’s all Folks!!

    Read the article

  • Solaris 11.1 changes building of code past the point of __NORETURN

    - by alanc
    While Solaris 11.1 was under development, we started seeing some errors in the builds of the upstream X.Org git master sources, such as: "Display.c", line 65: Function has no return statement : x_io_error_handler "hostx.c", line 341: Function has no return statement : x_io_error_handler from functions that were defined to match a specific callback definition that declared them as returning an int if they did return, but these were calling exit() instead of returning so hadn't listed a return value. These had been generating warnings for years which we'd been ignoring, but X.Org has made enough progress in cleaning up code for compiler warnings and static analysis issues lately, that the community turned up the default error levels, including the gcc flag -Werror=return-type and the equivalent Solaris Studio cc flags -v -errwarn=E_FUNC_HAS_NO_RETURN_STMT, so now these became errors that stopped the build. Yet on Solaris, gcc built this code fine, while Studio errored out. Investigation showed this was due to the Solaris headers, which during Solaris 10 development added a number of annotations to the headers when gcc was being used for the amd64 kernel bringup before the Studio amd64 port was ready. Since Studio did not support the inline form of these annotations at the time, but instead used #pragma for them, the definitions were only present for gcc. To resolve this, I fixed both sides of the problem, so that it would work for building new X.Org sources on older Solaris releases or with older Studio compilers, as well as fixing the general problem before it broke more software building on Solaris. To the X.Org sources, I added the traditional Studio #pragma does_not_return to recognize that functions like exit() don't ever return, in patches such as this Xserver patch. Adding a dummy return statement was ruled out as that introduced unreachable code errors from compilers and analyzers that correctly realized you couldn't reach that code after a return statement. And on the Solaris 11.1 side, I updated the annotation definitions in <sys/ccompile.h> to enable for Studio 12.0 and later compilers the annotations already existing in a number of system headers for functions like exit() and abort(). If you look in that file you'll see the annotations we currently use, though the forms there haven't gone through review to become a Committed interface, so may change in the future. Actually getting this integrated into Solaris though took a bit more work than just editing one header file. Our ELF binary build comparison tool, wsdiff, actually showed a large number of differences in the resulting binaries due to the compiler using this information for branch prediction, code path analysis, and other possible optimizations, so after comparing enough of the disassembly output to be comfortable with the changes, we also made sure to get this in early enough in the release cycle so that it would get plenty of test exposure before the release. It also required updating quite a bit of code to avoid introducing new lint or compiler warnings or errors, and people building applications on top of Solaris 11.1 and later may need to make similar changes if they want to keep their build logs similarly clean. Previously, if you had a function that was declared with a non-void return type, lint and cc would warn if you didn't return a value, even if you called a function like exit() or panic() that ended execution. For instance: #include <stdlib.h> int callback(int status) { if (status == 0) return status; exit(status); } would previously require a never executed return 0; after the exit() to avoid lint warning "function falls off bottom without returning value". Now the compiler & lint will both issue "statement not reached" warnings for a return 0; after the final exit(), allowing (or in some cases, requiring) it to be removed. However, if there is no return statement anywhere in the function, lint will warn that you've declared a function returning a value that never does so, suggesting you can declare it as void. Unfortunately, if your function signature is required to match a certain form, such as in a callback, you not be able to do so, and will need to add a /* LINTED */ to the end of the function. If you need your code to build on both a newer and an older release, then you will either need to #ifdef these unreachable statements, or, to keep your sources common across releases, add to your sources the corresponding #pragma recognized by both current and older compiler versions, such as: #pragma does_not_return(exit) #pragma does_not_return(panic) Hopefully this little extra work is paid for by the compilers & code analyzers being able to better understand your code paths, giving you better optimizations and more accurate errors & warning messages.

    Read the article

  • HTML5 Game (Canvas) - UI Techniques?

    - by Jason L.
    Hi! I'm in the process of building a JavaScript / HTML5 game (using Canvas) for mobile (Android / iPhone/ WebOS) with PhoneGap. I'm currently trying to design out how the UI and playing board should be built and how they should interact but I'm not sure what the best solution is. Here's what I can think of - Build the UI right into the canvas using things like drawImage and fillText Build parts of the UI outside of the canvas using regular DOM objects and then float a div over the canvas when UI elements need to overlap the playing board canvas. Are there any other possible techniques I can use for building the game UI that I haven't thought of? Also, which of these would be considered the "standard" way (I know HTML5 games are not very popular so there probably isn't a "standard" way yet)? And finally, which way would YOU recommend / use? Many thanks in advance!

    Read the article

  • How should UI layer pass user input to BL layer?

    - by BornToCode
    I'm building an n-tier application, I have UI, BL, DAL & Entities (built from POCO) projects. (All projects have a reference to the Entities). My question is - how should I pass user input from the UI to the BL, as a bunch of strings passed to the BL method and the BL will build the object from the parameters, or should I build the objects inside the UI submit_function and send objects as parameters? EDIT: I wrote n-tier application, but what I actually meant was just layers.

    Read the article

  • How can I make Google show unit conversions by default?

    - by bUbUKid
    When I search for "4 inches in g" on my Windows Firefox I immediately get a unit conversion done by Google that shows up before the actual search results. On my Ubuntu 12.04 system this does not work though. I tried Firefox and Chromium and have no script blockers installed. I also switched off AdBlock Plus for testing but to no avail. I realize that this is not really Ubuntu doing something wrong but: Are there any settings I can modify to make Google show these results? I use them quite frequently and I believe (though I cannot test it anymore) that this used to work on my last Ubuntu System. Maybe there are some script sources that Ubuntu has disabled by default or something like that?

    Read the article

  • Is it possible to develop apps with Kendo UI to submit to iOS App Store?

    - by Farshid
    The number of platforms I have to develops apps for is increasing and It brings me lots of stress to learn new technologies for each target platform. I found out that Telerik's Kendo UI is very good to build websites that look and feel native on mobile platforms (e.g. iOS and Android). My question is, is it possible to build HTML5 apps to deploy them on iTunes App Store and Google Play? Please note that I am eager to know the possibility of creating apps (complete apps bundled in standard format of Apple and Google for distribution in their respective mobile app markets) but not websites.

    Read the article

< Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >