Search Results

Search found 26742 results on 1070 pages for 'linux kernel'.

Page 412/1070 | < Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >

  • IPtables: DNAT not working

    - by GetFree
    In a CentOS server I have, I want to forward port 8080 to a third-party webserver. So I added this rule: iptables -t nat -A PREROUTING -p tcp --dport 8080 -j DNAT --to-destination thirdparty_server_ip:80 But it doesn't seem to work. In an effort to debug the process, I added these two LOG rules: iptables -t mangle -A PREROUTING -p tcp --src my_laptop_ip --dport ! 22 -j LOG --log-level warning --log-prefix "[_REQUEST_COMING_FROM_CLIENT_] " iptables -t nat -A POSTROUTING -p tcp --dst thirdparty_server_ip -j LOG --log-level warning --log-prefix "[_REQUEST_BEING_FORWARDED_] " (the --dport ! 22 part is there just to filter out the SSH traffic so that my log file doesn't get flooded) According to this page the mangle/PREROUTING chain is the first one to process incomming packets and the nat/POSTROUTING chain is the last one to process outgoing packets. And since the nat/PREROUTING chain comes in the middle of the other two, the three rules should do this: the rule in mangle/PREROUTING logs the incomming packets the rule in nat/PREROUTING modifies the packets (it changes the dest IP and port) the rule in nat/POSTROUTING logs the modified packets about to be forwarded Although the first rule does log incomming packets comming from my laptop, the third rule doesn't log the packets which are supposed to be modified by the second rule. It does log, however, packets that are produced in the server, hence I know the two LOG rules are working properly. Why are the packets not being forwarded, or at least why are they not being logged by the third rule? PS: there are no more rules than those three. All other chains in all tables are empty and with policy ACCEPT.

    Read the article

  • Only One GPU Detected in the Nvidia Quadro NVS 450

    - by Kyle Brandt
    I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

    Read the article

  • How to organise storage for media content such as video and music?

    - by thor
    Currently, we have a single server hosting all content: music, video and software. This content is downloaded by users through HTTP. Now free space is coming to an end and we are exploring different ways of extending our storage capacity. We want to do it cheap, simple and reliable (protected from disk/ server faults). Currenly, we see two ways: Add a couple of cheap servers with 4 disks (RAID1 ?), run some distributed file-system on top, like GlusterFS. Pros: hopefully, we will see all our disks as single flat file system, just dump content into it and be done. Cons: could be tricky in configuration and handling of faults. Add a couple of cheap servers, all running HTTP servers. Each piece of content (be it a music file or video) is placed on randomly selected two servers. Pros: don't have to deal with RAID, as content is duplicated; single server failure does not bring down any part of content; doubled distribution capacity (as any signle file could be downloaded from any of two servers hosting it). Cons: requires some scripting on part of distribution of content, adding/ removing servers. Do we miss any other ways? Which of the aforementioned options seems to be the best?

    Read the article

  • Why does CPU processing time matter when compared to real wall clock time?

    - by PeanutsMonkey
    I am running the command time 7zr a -mx=9 sample.7z sample.log to gauge how long it takes to compress a file larger than 1GB. The results I get are as follows. real 10m40.156s user 17m38.862s sys 0m5.944s I have a basic understanding of the difference but don't understand how this plays a role in the time in takes to compress the file. For example should I be looking at real or user + sys?

    Read the article

  • mod_ntlm for RHEL 5.3

    - by vikasa
    I tried to compile mod_ntlm for Oracle HTTP Server but got all sorts of errors, can someone point me to a pre-compiled binary? Tried everything at http://wiki.bestpractical.com/view/NtlmAuthentication still no go Thanks

    Read the article

  • Install WAS 7.0 on RHEL 6

    - by Madhur Ahuja
    I am trying to install Websphere 7 x64 on RHEL 6 x64. I am using Developer edition. When I try to execute ./install on the command prompt, it waits for few seconds and then returns to prompt without any error. I have installed all the pre-requisites as listed in this article: http://pic.dhe.ibm.com/infocenter/wasinfo/v7r0/index.jsp?topic=%2Fcom.ibm.websphere.installation.base.doc%2Finfo%2Faes%2Fae%2Ftins_linuxsetup_rhel6.html Any idea how to troubleshoot this ?

    Read the article

  • When and Where does Wubi mount it's virtual disks

    - by TuxPotato
    My use of the wubi-new-virtual-disk made Wubi start mounting this new virtual home disk over my /home folder. After the use of the script failed, I am left with Wubi constantly remounting an empty virtual disk over my /home folder. I followed the instructions on the Ubuntu website to revert the change, but the mounting continues. Where did Wubi put the mount operation, and how can I remove it? Thanks in advance!

    Read the article

  • What are potential reasons a user could be connected to a home network, but not to the internet?

    - by Matthew
    I have a friend that recently started using Ubuntu, and I've been answering his questions via the internet. However, I'm stuck on this one. He bought Linksys WPC11 wireless card, and says he was able to create a network connection, but was unable to ping or use a browser. I'm not quite sure where to start in figuring this out--what are some common causes of this sort of problem?

    Read the article

  • Is one type of options to ps preferred?

    - by Jim
    GNU ps supports BSD-style options, UNIX-style options, and GNU long options. Is using one of these types (in scripts and at the command line) preferred over the others? I get the impression from the manpage that the functionality of the option styles does not overlap completely.

    Read the article

  • How to configure autofs5 timeout on per-filesystem basis?

    - by Norman Ramsey
    Because of a show-stopping bug in Debian autofs 4, I just upgraded to autofs5. It is not honoring the timeout option in my auto.master file: /var/autofs/removable /etc/auto.removable --timeout=2 I use this map for thumb drives and so on; I don't want a general default timeout of 2 seconds. I did some digging and although the --timeout option worked in autofs 4, and it appears in some examples on the Web, it is not actually sanctioned (or even mentioned) in the documentation for the auto.master file. So I don't feel I can report the problem as a bug. How can I get autofs5 to timeout after 2 seconds only on designated filesystems? Update: I am using a Debian-packaged autofs5, version 5.0.4-3.2.

    Read the article

  • Using fedora 17 commandline 'mail' program cannot send to hotmail

    - by Eric Leschinski
    I am trying to use the console in Fedora 17 to send an automated email to myself. I run this: echo "email content" | mail -s "blah" [email protected] It works fine, google treats it as a spam email, but when you mark it not spam everything is cool. For Hotmail there are policies to prevent the email from being sent. I do this: echo "email content" | mail -s "blah" [email protected] And the email returns as undeliverable, the email does not even appear in the spam folder and I get this as a response: ----- Transcript of session follows ----- ... while talking to mx3.hotmail.com.: >>> MAIL From:<[email protected]> SIZE=685 <<< 550 DY-001 (BAY0-MC3-F8) Unfortunately, messages from 184.90.101.28 weren't sent. Please contact your +Internet service provider. You can tell them that Hotmail does not relay dynamically-assigned IP ranges. +You can also refer your provider to http://mail.live.com/mail/troubleshooting.aspx#errors. 554 5.0.0 Service unavailable So apparently hotmail doesn't like spammers so much, they they are blocking anything with a dynamically assigned IP range. Google does not do this. What is the easiest way to just get around this and send an email to hotmail and end up in their spam folder to be unblocked later by the user?

    Read the article

  • How can I avoid a few seconds of blank video when using -vcodec copy?

    - by arlomedia
    I'm processing user-uploaded videos on a CentOS web server with ffmpeg. I need to convert each video to a standard size and format, then extract a 30-second sample clip from each video. I want to use the "-vcodec copy" flag in the extraction command to avoid encoding a second time. This command works for my initial conversion: ffmpeg -i uploaded.mov -f mp4 -vcodec libx264 -vpre medium -acodec libfaac -r 15 -b 360k -ab 48k -ar 22050 -s 480x320 formatted.mp4 And this sometimes works for the extraction: ffmpeg -i formatted.mp4 -vcodec copy -acodec copy -ss 0 -t 30 formatted_sample.mp4 However, when I run the extraction command on some videos, the extracted sample clip starts with several seconds of blank video. The audio starts right away but the video doesn't start for 3-6 seconds. To demonstrate the problem, I've uploaded two video clips and run the above commands on them. I created the first clip in Final Cut Express and encoded it with Handbrake before uploading to the web server: 1a) uploaded clip 1b) converted with first command 1c) extracted with second command, missing first six seconds By comparison, this second clip comes from Apple's website and does not show the problem: 2a) uploaded clip 2b) converted with first command 2c) extracted with second command, no problem Can anyone see what's different about the two source clips? And if so, is there anything I can do in my conversion command so that when the extraction command runs, the clip is set up to avoid the missing video? By the way, I initially had the problem with ffmpeg 0.6.1 installed from yum, but I upgraded to the latest git version and the problem remains.

    Read the article

  • Force gdm login screen to the primary monitor

    - by JIa3ep
    I have two monitors attached to my video card. Primary monitor has a resolution equal to 1280x1024 and second has 1920x1200. My gdm login screen always appears on the second monitor even if it is switched off. My question is how to force gdm to show login screen always on primary monitor with resolution 1280x1024? I use Ubuntu 10.04.

    Read the article

  • FreeNAS - how to "Exclude from file" in Rsyncd (GUI)

    - by user179181
    I am trying to set rsync tasks to Pull user profiles from 11 Windows machines running DeltaCopy Server and then configure ZFS periodic snapshot tasks for a backup solution. So far this has been working fine, although i would like to exclude certain file types like .DAT or NTUSER.DAT. My Exclusion file resides on the local ZFS Dataset (Receiving side) and is as follows: Temp Temporary Internet Files NTUSER.DAT NTUSER.DAT.LOG *.dat *.tmp *.DAT.log *.ost *.pst The command i typed under Auxiliary Parameters (Rsyncd Global Conf under services)is as follows: exclude from = /mnt/Storage/User_Profiles/exclude.txt Ive tried deleting the .DAT files from the receiving end and just as i start to get excited i click refresh and there they are again

    Read the article

  • How to get an inactive RAID device working again?

    - by Jonik
    After booting, my RAID1 device (/dev/md_d0 *) sometimes goes in some funny state and I cannot mount it. * Originally I created /dev/md0 but it has somehow changed itself into /dev/md_d0. # mount /opt mount: wrong fs type, bad option, bad superblock on /dev/md_d0, missing codepage or helper program, or other error (could this be the IDE device where you in fact use ide-scsi so that sr0 or sda or so is needed?) In some cases useful info is found in syslog - try dmesg | tail or so The RAID device appears to be inactive somehow: # cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md_d0 : inactive sda4[0](S) 241095104 blocks # mdadm --detail /dev/md_d0 mdadm: md device /dev/md_d0 does not appear to be active. Question is, how to make the device active again (using mdmadm, I presume)? (Other times it's alright (active) after boot, and I can mount it manually without problems. But it still won't mount automatically even though I have it in /etc/fstab: /dev/md_d0 /opt ext4 defaults 0 0 So a bonus question: what should I do to make the RAID device automatically mount at /opt at boot time?) This is an Ubuntu 9.10 workstation. Background info about my RAID setup in this question. Edit: My /etc/mdadm/mdadm.conf looks like this. I've never touched this file, at least by hand. # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR <my mail address> # definitions of existing MD arrays # This file was auto-generated on Wed, 27 Jan 2010 17:14:36 +0200 In /proc/partitions the last entry is md_d0 at least now, after reboot, when the device happens to be active again. (I'm not sure if it would be the same when it's inactive.) Resolution: as Jimmy Hedman suggested, I took the output of mdadm --examine --scan: ARRAY /dev/md0 level=raid1 num-devices=2 UUID=de8fbd92[...] and added it in /etc/mdadm/mdadm.conf, which seems to have fixed the main problem. After changing /etc/fstab to use /dev/md0 again (instead of /dev/md_d0), the RAID device also gets automatically mounted!

    Read the article

  • Rename/Move file only if destination does not exist

    - by mikeY
    I would like to know if there is any way a file can be moved only if the destination does not exist - in other words, move only if it does not lead to overwriting. mv --update seemed first to be the solution, however, if the timestamp of the source path is newer than the destination, move will overwrite it and all attempts to circumvent this by modifying the timestamp before the move will fail. I need this behaviour to implement a simple file based lock where existence of a 'lock' file indicates that the lock is acquired.

    Read the article

  • What's the issue with this Samba setup?

    - by Dan Nestor
    I asked this on superuser, but I realized that may be the wrong place. I am duplicating the question here, I hope this is allowed. I am trying to share a directory through samba. In smb.conf I have the following: [global] workgroup = WORKGROUP security = user passdb backend = tdbsam netbios name = <hostname> [share_name] path = </path/to/share> writable = yes valid users = <username> <username>, the user in question, is the owner of directory /path/to/share. Permissions on the directory are 755. If I try to connect from another computer, the connection attempt is unsuccessful (I assume it's an authentication error, because it re-prompts me for the password). The client requires a domain name for authentication, I tried both WORKGROUP and the hostname/netbios name of the samba server. Samba logs on the server have no mention of the failed connection attempt. Firewall on the server is down. What am I doing wrong? Update: have since run smbpasswd -a <username> and now I am getting a clear error message, "not enough permissions to view contents of share".

    Read the article

  • Why is my apache2, mod_fcgid, php configuration causing 100% cpu usage?

    - by Scott Lundgren
    Page load makes a quick initial connection, then hangs about 10 seconds before the page renders. When the server load goes up I start watching top & I see that both CPUs get pegged at times to 100% by between 4-8 processes of php-cgi. My theory is that since I never see RAM usage never go above 50%, that apache is able to handle the requests coming in, but is queueing them for PHP to process. What is wrong with my mod_fcgid/php configuration ? RHEL 5.4 2 Xeon E5420s @ 2.50 Ghz 4 Gb RAM Apache 2.2.3 Timeout 30 KeepAlive On MaxKeepAliveRequests 0 KeepAliveTimeout 5 <IfModule worker.c> StartServers 2 MaxClients 300 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> mod_fcgid 2.2.10 LoadModule fcgid_module modules/mod_fcgid.so <IfModule !mod_fastcgi.c> AddHandler fcgid-script fcg fcgi fpl php </IfModule> SocketPath run/mod_fcgid SharememPath run/mod_fcgid/fcgid_shm DefaultInitEnv PHPRC "/etc/" FCGIWrapper /usr/bin/php-cgi .php MaxRequestsPerProcess 1500 MaxProcessCount 20 IPCCommTimeout 240 IdleTimeout 240 APC 3.0.19 extension = apc.so apc.enabled=1 apc.shm_segments=1 apc.optimization=0 apc.shm_size=32 apc.ttl=7200 APC cache is 43% used with a 99% hit rate

    Read the article

  • Trixbox CentOS Default GW Problem (Multi-homed server)

    - by slashp
    I'm having an issue with a CentOS trixbox server which is dual-homed (one private facing NIC [eth1], one internet-facing NIC [eth0]). I can't seem to get the default gateway to set properly to our ISP's GW via eth0. I've modified the /etc/sysconfig/network to contain both a GATEWAY & GATEWAYDEV line and removed the GATEWAY line from /etc/sysconfig/network-scripts/ifcfg-eth1 (as well as /etc/sysconfig/network-scripts/ifcfg-eth0). No default GW shows up in the routing table unless it's specified in the ifcfg-eth1 file (which both the wrong interface and wrong gateway IP), otherwise, the routing table simply does not contain a default gateway..any ideas would be greatly appreciated! Thanks! EDIT Just realized when attempting to add the default gateway manually using the route add command, I receive an error stating: SIOCADDRT: Network is unreachable I know this error can occur when your default gateway and interface IP address are not on the same subnet..in this case, my public IP address of eth0 is a /29.

    Read the article

  • Can I enable discards on a LUKS-encrypted ssd drive in RHEL6 (and do I need to)?

    - by Dan Nestor
    I have a RHEL 6.4 workstation, running on a LUKS-encrypted LV residing on a SSD. I found RedHat documentation stating that dm_crypt does not currently support TRIM passthrough, however I also found other sources that state the opposite (albeit for other distributions) and even that discards are not needed for recent SSD drives which use some sort of automatic garbage collection. So: 1) Can I enable TRIM/discards with my setup? 2) Do I need to, for optimal disk performance? Thanks for your thoughts.

    Read the article

  • Disk space profiling in Unix

    - by user1677770
    I'm looking for a tool to summarize how disk space is being used on very large partitions. Our file system is around 950TB, mostly broken up into 20TB partitions. There are some really nice graphical tools for visualising these file spaces: http://www.disksavvy.com/disksavvy_screenshots.html http://methylblue.com/filelight/ But I'm really not sure how well they will scale. Does anybody have any experience of these tools and can make any recommendations? Even something that parses and summarises a really big du output would be a good start.

    Read the article

  • external disk suddenly unmounting

    - by hasen j
    Platform: Ubuntu 9.10 Disk Brand/model: WD My Book The external hard disk suddenly unmounts after a while. I suspect it's due to it "sleeping" to save power. I don't recall the problem having occurred before the upgrade to Karmic. How can this be fixed?

    Read the article

  • Apache availability with the two front-ends on diferent locations. Is it possible?

    - by marc.riera
    Hello, I have to locations (office and service providers). One DNS(bind) serving our domain as authoritative, and a service provider webserver with our corporate web on a private server. So.. Now we are planing to upgrade our server on the ISP to a new one, and I would like to use this situation to improve our service. Is it possible to mount a high availability apache/mysql/php within to different locations? I will install a bind slave on the same new server, so I hope it will make things easier, but I need some hints and tips on how to ride it. THanks.

    Read the article

< Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >