Search Results

Search found 16174 results on 647 pages for 'disk space'.

Page 413/647 | < Previous Page | 409 410 411 412 413 414 415 416 417 418 419 420  | Next Page >

• Why does my drive show as 180GB used, but copies only 40GB?

  - by Manuel

  My computer crashed, so I removed the drive (with Windows XP Professional 32-Bit) and put this drive in another computer running Windows 7 64-bit. Booting with Win7, when going to My Computer it is showing the XP drive as more than 180GB used. So as a quick backup, I'm trying to copy all the disk's content to a folder, but when I start copying, it's showing only 40 GB as the total size of the files to copy. I enabled showing system and hidden files in View options. What could be the problem?

  Read the article

• Emulate a USB port as a USB flash drive?

  - by Wilco

  Does anyone know of any software that can emulate a USB flash drive through an available USB port in OS X? Perhaps some way to map a directory to a USB port that could then be connected to another device that supports reading USB storage devices? I'd love to connect my laptop to my car's USB port and access files as if it were a USB drive. I know about the target disk mode with firewire (not sure if this is also supported over USB), but I was hoping for something that doesn't require booting outside of the OS (I want to retain use of the machine). Any ideas?

  Read the article

• Use Windows 7 offline sync with external usb hd

  - by René

  Yeah, truly the whole question in the header. Is there a way to use Windows 7 offline sync (which we know from network mapped drives) with a external usb hd? When not, are there similar built in tools or good third party tools? My scenario: I want to buy a ultrabook with SSD which is mostly limited in space. So I'm going to put all files to a external HD and only store current projects on the local SSD. Let's say I have to change project. It would be easy just change sync folders and have the second project synced to my hd too. With network mapped drives it's such easy. Paths do not differ if the drive is offline so in most situations you don't take notice if the folder is offline. And you only have to activate offline file for the folders you courrently need for work. So is there a similar solution for usb hard drives?

  Read the article

• how did my laptop lose daylight savings time on power loss?

  - by EndangeringSpecies

  it was an old laptop that may or may not have dead CMOS battery (at least it had time reset to 0 when I dusted it off). So, it was plugged into power for awhile without the main battery and the clock was correct. Then there was a power outage. When I subsequently turned it on, surprise-surprise, it had one hour off correct time. So the clock apparently kept running during the outage, but daylight savings time info vanished (from disk? where is it stored?) How come?

  Read the article

• Options to Reformat USB Drive

  - by user8783

  I have a 64GB usb thumb drive. When I plug it into a Windows system (I have tried several machines with both Windows 7 and 8), the system attempts to read it and never completes. The drive does not show up in the device manager, nor does it appear in Computer Management - Disk Management. If I click on the "Safely Remove Hardware" icon, however, I do get an option for "Eject Mass Storage Media", although it never accomplishes anything. Also, as long as the USB drive is connected, I cannot access other USB drives or even restart my computer. It seems as though it locks up Windows Explorer. Is there any option to reformat this drive? It was a great drive up until all this craziness began and I would hate to throw it out because it was rather pricey.

  Read the article

• Can expire_logs_days be less than 1 day in MySQL?

  - by Scott

  So... yesterday I received an "after the fact email" about a campaign that has started for one of the services that I run. Now the DB server is getting hammered, hard, to the tune of about 300mb/min in binary logging for the replicate. As you could imagine, this is chewing up space at a fairly tremendous rate. My normal 7 day expiry of binary logs just isn't cutting it. I've resorted to truncating logs to just the last for 4 hours with(I'm verifying that replication is up to date with mk-heartbeat): PURGE MASTER LOGS BEFORE DATE_SUB( NOW(), INTERVAL 4 HOUR); I'm just running that from cron every few hours to weather the storm, but it made me question the minimum value for expire_logs_days. I haven't come across a value that is less than 1, but that doesn't mean that it isn't possible. http://dev.mysql.com/doc/refman/5.0/en/server-system-variables.html#sysvar_expire_logs_days gives the type as being numeric, but doesn't indicate if it's expecting integers.

  Read the article

• How to find what is written to filesystem under linux

  - by bardiir

  How can i find out what processes write to a specific disc over time? In my particular case I got a little homeserver running 24/7 and I included a script in the crontab to shutdown all drives that are not used (no change in /proc/diskstats for 15 minutes). But my system disc won't come down at all. I'm suspecting logs but it's probably not only logs writing to the filesystem on the system disk and I don't want to go all the way moving the logfiles to something else just to find out the disc still doesn't spin down and there's nothing i can do against it.

  Read the article

• FreeBSD 9 (amd64) reboot/shutdown process is very slow

  - by nbari

  I have a Dell Poweredge 2900 III with FreeBSD 9 (amd64), the server uses mfi wich handles a raid10, I had to reboot the server, but notice that either when rebooting or shutting down the server, something is going wrong, besides taking to much time to reboot/shutdown, after rebooting I notice that that some ldap instances within some jails could'nt start and this was because the database was corrupted. This make me think that probably something was wrong with the disks or mfi card, but checking the disk array / logs everything seems to be working fine. My set up is something like this: Host server has the minimum base of FreeBSD 9 amd64, within I create some jails, the ones contain services like mysql, email, and some others ldap. With FreeBSD 7 and 8 I didn't notice this behavior but with FreeBSD 9 something is not working well. I did a clean installation of FreeBSD 9 and root filesystem is using ZFS. Attached is an image hoping some one can give me a hint of what to check or any kind of advice. reboot capture screen image

  Read the article

• ZFS Configuration advice

  - by rbarrette

  I need some advice on configuring ZFS. Here is what I have: Physical Disks: 4x 3 TB 2x 2 TB 2x 1 TB What is the best configuration for my Vdevs and storage pool. I want to maximaze space but still maintain redundancy. Should I just get 2 more 3TB's and just create 2x 3-3TB raid2z storage pools? Create a 1x 4-3TB raidz2 vdev? Can I put redundancy at the pool level and create individual vdevs for each drive and then add 2x 1TB+2TB striped vdevs to keep all vdevs the same size. Keep in mind I do need to migrate data from the smaller drives and am planning on adding more 3tb drives later on. What do you think?

  Read the article

• kvm process has too large a memory footprint on host

  - by gucki

  I'm using latest ubuntu quantal and start a kvm guest which should have 2048 MB of memory. Now after a few hours I can see that the kvm process of this guest is around 2700 MB, so 700 MB more than the guest should be able to consume. I mean a small overhead like 1% would be ok, but not 30%?! root 8631 74.0 22.2 4767484 2752336 ? Sl Nov07 512:58 kvm -cpu kvm64 -smp sockets=1,cores=2 -cpu kvm64 -m 2048 -device virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100 -drive file=rbd:data/vm-disk-1,if=none,id=drive-virtio0,cache=writeback,aio=native -device virtio-net-pci,netdev=net0,bus=pci.0,addr=0x12,id=net0,mac=02:7a:86:e6:1a:6c,bootindex=200 -netdev type=tap,id=net0,vhost=on -usbdevice tablet -nodefaults -enable-kvm -daemonize -boot menu=on -vga cirrus root 8694 0.0 0.0 0 0 ? S Nov07 0:00 [kvm-pit/8631] How is this possible and how to prevent it?

  Read the article

• Windows XP computer reboots at start

  - by Jonas

  I have trouble with a Windows XP computer. After Windows is started and I can see the desktop background (sometimes I can use the system a few seconds), then the system is rebooted before I can do anything. I have used a Windows XP CD and runned chkdsk /r from the repair console. But it didn't help. I have also tried booting in "safe mode" but it didn't help. The C:\Windows\Minidump directory is empty. What can I do to solve this? UPDATE: I have now placed the harddrive in another computer and I have access to all data. Except from copying all data, is there anything I can make with the system so I can boot from the harddrive again? Is it "safe" to install windows on the same disk and directory - so I can access the data but not run the applications?

  Read the article

• Bootmgr is missing for windows xp

  - by user1167074

  I know that there are so many posts on this subject but none of them worked for me. I have Ubuntu on my machine and I would like to install windows xp. As my cd/dvd reader does not work, I made a bootable usb from iso image using UNETBOOTIN, but when I try to boot in through USB it says "BOOTMGR is Missing". I have searched a lot but could not find any solution to it. Please note that my hard disk uses ext4 format and my bootable drive uses NTFS. I have set the Boot Sequence as USB Drive in BIOS. Please let me know if you need any additional information to fix this. Thanks

  Read the article

• Late Model 2011 Macbook Pro with SSD appears to be off somehow

  - by chris

  Ok, I just got a SSD for my Macbook Pro Late-2011. The specs from what I read are that the laptop is capable of 6gbps, so I got myself a OZC Agility 240gb 6gbps SSD. Decided to join the club and speed test it with Blackmagic Disk Speed Test.. and the results are equivilent to that of a 3gbps setup. So.. I am wondering overall is there a configuration setting somewhere I can tweak? The original HD was a 500gb HDD the spinning kind. So I'm figuring maybe thats why there may be a setting somewhere hidden I dunno about that I can tweak, just wanna see if anyone else knows if this is the case. edit should also mention did a fresh factory install, nothing carried over from original hd

  Read the article

• Is it possible to use software raid in Windows 7 on the boot partition?

  - by DoctaJonez

  I want to use RAID 1 on my workstation configuration at work, and I've been looking at using the build in mirror functionality in Windows 7. When you click on the add mirror option it presents you with the following warning. I've done some Google searching and the consensus seems to be that you cannot boot from a dynamic volume, but some forum posts seem to indicate that people have tried this with success (e.g. here). With Google searches producing contradictory information I thought I'd ask you guys for an authoritative answer. Can I use the inbuilt Windows 7 mirroring for my boot partition? Or as I suspect, will it make it unbootable due to it being converted to a dynamic disk?

  Read the article

• Installing windows 8 into a new partition

  - by ACarter

  I've just gone through the Windows 8 upgrade process, and I am at the "Install now/Install by creating media/Install later from your desktop" stage. I've already got a sufficiantly big, empty partition, so can someone explain in fairly simple terms how to install onto the new partition? I would prefer not to burn the ISO onto a disk, it would be a lot easier if I could use a USB drive. (I've done quite a bit of googling, but all that I can find goes into endless detain about the partitioning, and spends very little time on putting the ISO on a booteable drive. How do I do this? Do I need to empty the drive? etc?)

  Read the article

• System stuttering caused by hard drive

  - by LukLed

  My system keeps freezing for about 1-2 second every time I try to do something. For example, when I enter URL in browser, it freezes and starts working after few seconds. It is probably related to hard drive. I installed HD tune and when benchmark is in progress, causing constant disk use, everything works fine in background, there are no lags. What can be the reason of this issue? My hardware is Acer Aspire 7740G-6969 running on Windows 7.

  Read the article

• How do I install yum on Redhat Enterprise 4?

  - by Bob Cross

  For historical reasons, one of the machines that I manage has a Redhat Enterprise 4 boot disk (among others). Every now and then, we have to boot into RHEL4 to bring up some of the legacy software that we support and connect to. Since it's a fringe system, the Redhat support has long since lapsed and I can't convince myself that it would be worth paying just to get RPMs that I can go and get for myself. That said, the default RHEL tools are heavily biased against letting you do exactly that. I would like to install yum and use that as my package discovery and installation. So, is there an installation guide to integrating yum with an older RHEL 4 system?

  Read the article

• Can I move my Picasa data from one machine to another?

  - by Stuart Hemming

  I have lots of photos stored on an external hard disk. I have Picasa installed on my Windows 7 laptop and have spent a lot of time cataloging the collection, put names to faces and the like. I now have a new machine and I want all the hard work I did on my laptop to be available when I plug my external HD in to the new machine. Is there a magic spell I need to cast to make this happen? Or is all the data I need stored with the photos?

  Read the article

• Strange ports on default install of W7

  - by Sabre

  I have a base new install of windows 7, and when I went to look for something else I saw the attached netstat output. What concerns me is that this is Windows + Truecrypt + drivers, nothing else installed. The sequential high ranged ports belonging to several different seemingly not out of place services seemed odd. So I torched the install, used Active@ to scrub the disk, re-downloaded the ISO from MSDN, and did a fresh reinstall, viola, they are there again. It just seems out of place, I have seen a many netstats over the years, this one just strikes me as odd, so I started thinking rootkit? (JUst FYI, when I reloaded I named the machine "Error" so that is why the task manager reads the computer name as such.) So I would like to know if anyone else could explain it, and therefore is may be normal, or would they be worried as well, and should I start considering I have some very strange thing occuring on my network?

  Read the article

• Strange zsh autocomplete behaviour.

  - by Leda

  Every time I use tab autocompletion with zsh instead of completing the current string, it gives me a new string + options to complete. It's hard to explane, so here is an example. This is what would happen if I type 'ls Nue' and hit tab. [me@mbp:/Volumes/hdd/music]: ls Neu ls Neu Neuraxis/ Neurosis/ Neutral\ Milk\ Hotel/ If I delete the second `ls Nue', I am unable to delete the white space and the first. If I hit return, it is as if I have just entered a blank line. Does anyone know what is going on.

  Read the article

• df-h command in ubuntu

  - by Esha Sharma

  I am a new user of Ubuntu. When I type df -h in terminal , it gives me list of all storage devices and space usage. In my system I get this. Filesystem Size Used Avail Use% Mounted on /cow 934M 173M 761M 19% / udev 925M 4.0K 925M 1% /dev tmpfs 374M 856K 373M 1% /run /dev/sdb1 7.5G 2.8G 4.8G 37% /cdrom /dev/loop0 1.5G 1.5G 0 100% /rofs tmpfs 934M 16K 934M 1% /tmp none 5.0M 0 5.0M 0% /run/lock none 934M 76K 934M 1% /run/shm /dev/sda 299G 74M 299G 1% /media/q I understand that /dev/sda is my hard drive which is 320 gb(in gib it is 299 and hopefully that is what is being displayed) and /dev/sdb1 is pendrive of 8gb from which I am running the live cd. My question is what are the other folders and what is the physical location of these folders if complete memory is taken by the device dev/sda?

  Read the article

• ASP Fails with 500 Error

  - by VinceM

  We have a server setup as an IIS box and have some static pages with a few asp pages that handle the form submissions. The asp is really vbscript that sends a CDO message. When moving these pages to the new server the form will not submit, it gives a 500 error and the following shows in Event Viewer: Error: The Template Persistent Cache initialization failed for Application Pool 'DefaultAppPool' because of the following error: Could not create a Disk Cache Sub-directory for the Application Pool. The data may have additional error codes.. I can't seem to find any info on this anywhere... I was thinking it may have something to do with the fact that we created this server from an image of another server. Thanks for your help in advance... Vince

  Read the article

• Windows 7 pagefile size with large RAM and SSD

  - by Avi

  I've just upgraded my Windows 7 machine from 12GB to 24GB - both for running more VMs and for future proofing. My C driver is an SSD with 129GB formatted size. I was surprised to find out that the SSD only has 68GB free (most of my files are on D: to G:). Researching I found 24GB of my precious C: SSD are taken for virtual memory. So - do I need such large amounts of virtual memory when I have 24GB or RAM? I bought this size of memory so I"d not have to go to disk...

  Read the article

• Minimize writes to SSD disks with Windows 7

  - by mark

  Most people use their SSD as their primary system installation disk with Windows 7. W7 already has a lot of optimizations for SSDs, both in terms of performance and lifetime. Minimizing writes increases the lifetime of SSDs, so post each suggestion as an answer and let others vote on them. Update: I'm not sure anymore that minimizing writes is a good thing [tm], hard facts that SSDs will degrade within a noticeable time are missing and it seems this it can create a bit FUD about the functionality of the SSD. In other words: I question the usefulness of my wiki question.

  Read the article

• How to print new line character with echo?

  - by Summer_More_More_Tea

  I dump a string with hexdump like this 2031 3334 2e30 0a32 2032 3331 302e 000a. It is clear that 0x0a is new line character, however, when I try to echo this string out, I always got 1 430.2 2 13.0 -- the new line is replaced with a space, even I use the -e flag. What may be the problem? Does the tailing \0 ruin the output? Is there any alternatives to print 0x0a a new line? Thanks and Best regards.

  Read the article

< Previous Page | 409 410 411 412 413 414 415 416 417 418 419 420  | Next Page >