Search Results

Search found 36369 results on 1455 pages for 'document write'.

Page 413/1455 | < Previous Page | 409 410 411 412 413 414 415 416 417 418 419 420  | Next Page >

• HP DL185 - very slow disk read speed

  - by fistameeny

  Hi, I have a HP DL185 G6 Server (12 disk model) with the following spec: Quad Core Xeon 2.27GHz 6GB RAM HP P212 RAID controller with battery backup 2 x 128GB 15K SAS 3.5" (RAID-1 for the operating system) 4 x 750GB 7.5K SAS 3.5" (RAID-5 for the data, 2TB usable space) The operating system is Ubuntu Server 9.10. Both drives have been formatted as EXT4. We are finding that read speed of the RAID-5 array is poor. Disk test results below: sudo hdparm -tT /dev/cciss/c0d1p1 /dev/cciss/c0d1p1: Timing cached reads: 15284 MB in 2.00 seconds = 7650.18 MB/sec Timing buffered disk reads: 74 MB in 3.02 seconds = 24.53 MB/sec For info, the RAID-1 array performs as follows: sudo hdparm -tT /dev/cciss/c0d0p1 /dev/cciss/c0d0p1: Timing cached reads: 15652 MB in 2.00 seconds = 7834.26 MB/sec Timing buffered disk reads: 492 MB in 3.01 seconds = 163.46 MB/sec We thought this was because with no battery, read/write cache is disabled. We have bought and installed the battery backup and have used the HP bootable CD to change the cache settings to 50% read / 50% write and check cache is enabled on the drives and the controller. Is there something I'm missing?

  Read the article

• Comparing 2 (or 3 Files If Possible) "Line By Line"

  - by PythEch

  I want to find out the differences of 2 (or 3 files if possible) line by line. Diff utils can do this, however it gives inaccurate results. Because, 2 files have exact number of lines which is "134". But diff gives me "Added Lines" and "Removed Lines". However this is wrong, they have exact the same number of lines, there is no added or removed lines. The text files which I want to find differences of them, have only numbers written, maybe that's why that algortihm fails. I couldn't find any option to prevent that, however I may be wrong, I mean there should be an option for that, but again, I couldn't find. This is what I get (5am.txt vs 6am.txt, there is a huge problem): This is what I want (6am.txt vs 7am.txt, still has problems): But, first the first image still has this problem, at the last lines. Edit: After I figured out that there is no utility to do this, I handled myself. I almost did the same thing as what RedGrittyBrick have done. This script imitates diff utility so I (or you) can use it with diff2html. To use it with diff2html, just change line diff_stdout = os.popen("diff %s" % string.join(argv[1:]), "r") to diff_stdout = os.popen("script.py %s" % string.join(argv[1:]), "r") and name this script whatever you want: import sys f1=open(sys.argv[1],"r") f1_read=f1.readlines() f1.close() f2=open(sys.argv[2],"r") f2_read=f2.readlines() f2.close() changed={} first_c = "" for n in range(len(f1_read)): if f1_read[n]!=f2_read[n]: if first_c == "": first_c=n+1 changed[first_c]=n+1 else: first_c="" #Let's imitate diff-utils... for (x, y) in changed.items(): print "%d,%dc%d,%d" % (x,y,x,y) for i in range(x,y+1): sys.stdout.write("< %s" % f1_read[i-1]) print "---" for i in range(x,y+1): sys.stdout.write("> %s" % f2_read[i-1]) Final results:

  Read the article

• Reading log files from web application

  - by Egorinsk

  I want to write a small PHP application for monitoring logs on a Debian server, including syslog logs and Apache/PHP messages. The problem here is that Apache user (www-data) has no access to /var/log directory. What would be the best way to grant an access to logs for PHP application? Let's assume that log files can be really large, like hundreds of megabytes. I have some ideas: Write a shell script that would be run via sudo and tail last 512 Kb of log into a separate file that can be read by application - that's ineffective, because of forking a new process and having to read data twice Add www-data to adm group (that can read logs) - that's insecure Start a PHP process via cron every minute to read logs — that's not very good, because it doesn't allow real-time monitoring. Also, this script will be started even when I don't read logs, and consume CPU time (server is in the cloud, and I'll have to pay for it) Create a hardlink for all log files with lowered permissions - I guess, that won't work because logrotate could recreate log files and they'll change inode number. Start a separate nginx/Apache server under privileged user that may read logs. Maybe anyone got a better solution?

  Read the article

• Apache Bench reports different result with same page

  - by Aspis

  I'm running into a little problem base-lining an Apache2/fcgi/php-fpm server I am setting up. 1) If I run: ab -n 15000 http://mysite.com/index.php. Apache Bench returns Time per request: 41ms but document length: 0 bytes and html transferred: 0 bytes. The Transfer rate: 7.9Kb/s. 2) If I run: ab -n 15000 http://mysite.com/ Apache Bench returns Time per request: 83ms along with the accurate document length and html transferred total. The APC cache status reports identical hit counts from both test. Also Apache Bench reports no errors in either case. Overall, no errors on any test sites and all logs are clean, etc. DocumentRoot is set to index.php so I would expect both of these test runs to produced a similar result. My 2 question(s) are: 1) why the discrepancy? 2) which is the correct result? I've seen plenty of results like test 1 posted (with out question) but frankly from my own experience and those of others, accurate testing is hard to come by. Even with out goofy issues like this.

  Read the article

• How can I move linked Word/Excel files without breaking the links under Windows 7?

  - by DOUG NEEDHAM

  I currently operate under Windows XP and have multiple links between my Word and Excel files. I have to upgrade to Windows 7. When the .doc and .xls files are converted to .docm and .xlsm, respectively, the links no longer work. The Word document is still attempting to point back to the old .xls file rather than the new file. Also, creating new links between Word and Excel within Office 2010 doesn't seem to work. I create the new link, switch it from "Auto" to "Manual" and everything works fine. But when I copy the files to another folder, the Word document is still trying to link to the file in the previous folder rather than the new folder. This always worked in Windows XP. I've been using linked Word/Excel documents for 10+ years and have never really had a problem. I'm very careful to maintain Word and Excel filenames when moving the files to a new folder. The process has always been to 1.) move the files, 2.) update the links, 3.) rename the files, and 4.) update the links again. It's my understanding that under Windows XP, links between Word and Excel are relative. But under Windows 7 (and Office 2010?), those same links become fixed.

  Read the article

• Windows 7 - All Icons Missing, Explorer Progress Bar Never Finishes, Libraries Gone

  - by Alex

  since yesterday i've had three issues which all arose at the same time. windows 7 x64, i7 2.8ghz 12gb ddr3 1 - my libraries, favorites, drives are missing...basically the entire sidebar is gone. http://i.imgur.com/m8pRQ.png. yet when i open a dialog, my libraries and drives are back to normal ONLY for the dialog. i tried Restore Default Libraries. it works one time, but when i open libraries again i go back to the empty mess. restarting the computer temporarily fixes the problem. 2 - in the explorer window that's showing libraries, when i navigate to a certain folder i get an unending progress bar (the kind that turns the address bar green). yesterday when the problem started, i was saving a file to this folder. the program writing the file crashed during the write and i believe that's what caused the problem. i have sugarsync backing up that folder and when i restarted the computer sugarsync informed me that its database was corrupted, so i had to uninstall and reinstall the software. 3 - icons are missing. the Rebuild Icon Cache did not fix this. http://i.imgur.com/r9pgo.png restarting the computer temporarily fixes these problems, but when i open the directory with the initial write problem, everything stops working. edit: i should note that i did a chkdsk /f and it repaired problems. i also did the thing that verifies then restores windows files (can't remember the command now), which reported that everything was normal.

  Read the article

• Permissions in OS X for iTunes library with multiple users

  - by John

  I currently have a lot of music on an external drive and my iTunes set up from there. However, periodically, when the external drive isn't connected, iTunes will default back to the library location of my home directory user path. I don't want to mess with an external drive, as my Mac's HD is large enough to house the music collection. However, I have 4 family members – all with their own logins – using this same gob of music. I don't want four copies of the library, only one with all libraries referencing it. So, what I want to do is: Move all music files to a shared directory at /Macintosh HD/users/music. I created this directory and adjusted permissions, so all four users can read and write to this directory. Get all four accounts to reference this library instead of the external or local home locations I am hoping I can just check the box to keep library organized in my account, which is the admin and let iTunes move it all. Then delete current libraries for each account and re-add from the new shared location. Will the iTunes organization process cause permissions issues either by setting permissions to all the files access to my account only or write permissions or any other 'gotcha'? I am having a hard time coming up with a smooth solution that won't break everything and cause me to have mega duplicates or access issues. I would prefer not to do any XML library file editing if possible. Am I dreaming?

  Read the article

• Can I use @import to import Kod's default style sheet into my own?

  - by Thomas Upton

  I understand that Kod is being actively developed and is prone to drastic changes in any area. I would like to modify some small things (like font face and size or certain colors) while still being able to benefit from any changes or updates to the default Kod stylesheet. I thought that I would be able to @import the default stylesheet into my own to achieve this. This is what ~/.kod/custom.css would look like, @import url("file:///Applications/Kod.app/Contents/Resources/style/default.css"); /* Change the default font face and color. */ body { font-family: Menlo, monospace; color: #efefef; } This stylesheet was set with the following defaults command, per the comments at the top of Kod's default CSS file: defaults write se.hunch.kod style/url ~/.kod/custom.css Unfortunately, this didn't work. When I first tried to reload the style, Kod crashed. It opened fine again, but the @import statement wasn't working, and Kod crashed every time I saved the custom.css file. Am I doing something wrong? Did I write my @import statement wrong? Is that not how @import is supposed to work? Did I miss some sort of documentation or Kod Google Groups post that mentions that Kod explicitly disallows this?

  Read the article

• How to go about rotating logs which are arbitrary named and placed in deeply nested directories?

  - by Roman Grazhdan

  I have a couple of hosts which are basically a playground for developers. On these hosts, each of them has a directory under /tmp where he is free to do all he wants - store files, write logs etc. Of course, the logs are to be rotated, or else the disc will be 100% full in a week. The files can be plenty, but I've dealt with it with paths like /tmp/[a-e]*/* and so on and lived happily for a while, but as they try new cool stuff on the machine logrotate rules grow ugly and unmanageable, and it's getting more difficult to understand which files hit the glob. Also, logrotate would segfault if asked to rotate a socket. I don't feel like trying to enforce some naming policies in that environment, I think it's going to take quite a lot of time and get people annoyed and still would fail at some point. And I still need to manage the logs, not just rm the dirs at night. So is it a good idea in circumstances like these to write a script which would handle these temporary files? I prefer sticking with standard utilities whenever possible, but here I think logrotate is getting less and less manageable. And probably someone heard of some logrotate alternatives which would work well in such an environment? I don't need emailing logs or some other advanced features, so theoretically some well commented find | xargs would do. P.S. I do have a log aggregator but this stuff is not going to touch my little cute logstash machine.

  Read the article

• I can't get my PC to start up by a normal way.

  - by ssice

  I couldn't write a more accurate title. I am just unable to start the computer by pressing the Power On button. I checked the Power Supply and it seems to give good voltage values in every pin. And this is not a BIOS malfunction because of bad overclocking or anything that may come to your mind. And I will tell you why. It happens that EPS (or any ATX-based) power supply has the ability to be powered-on by the Motherboard by jumping the 13th pin of the 24-pin-ATX-connector to COM/GND. I did it, after pushing the power on button (without any visual response) and, pwhaa! The machine turned on. I was able to read (and even write, if I wanted) BIOS values and then start any OS installed. Machine starts, so it's not any kind of misconfiguration. It seems some hardware related. I am able to power the machine on only if I already pushed the power on button. Though pushing it without jumping the 13th pin to ground for a second does not power the machine. Of course, jumping the pin without pushing the power on button does not tell the motherboard anything, so the computer would not start up either. It's as if the logic that connects the power button with the 13th pin derivation to GND was unable to be activated. What can be the issue? How can I solve it? My configuration is as follows: CPU: AMD Phenom 9850 X4 Black Edition MB: ASUS Formula II AM2 RAM: 2x2GB Corsair Dominator 5-5-5-15 2T @ 1066MHz DDR2 Tested also with only 1 module GPU: 2x XFX nVIDIA GeForce 9600 GT XxX Alpha Dog Edition @ Core: 540Mhz [SLi] Power Supply: Xilence 700W (ATX 12V 2.3 / EPS 12V 2.92 compatible) PS: I know the machine is like 2 years old. I hardly use it now, but my parents do.

  Read the article

• How do I prevent a tar pipe from causing swapping?

  - by Jeff Shattock

  I have a rather large filesystem that I need to transfer from one Linux server to another. I figured the best way to do this was via a tar/netcat pipe arrangment, something like tar c . | pv | nc blah blah blah And it works great, the network stays fairly saturated, life is good. Until the source machine starts swapping. The files are on a raid on the source system, so the read speed is much faster than the write speed on the other end. Since the dest machine hasnt picked up the data yet, the source machine needs to stick it somewhere, so into RAM it goes, until there is no more free RAM. It then starts swapping, which is horribly painful since that machine has its OS installed on a somewhat slow CF card. Both machines have 4GB of physical ram, 64 bit Ubuntu 9.04 server. GigE link between them. How do I prevent this swapping? Can I put a "speed-limit" on the tar or netcat process so that the transfer speed doesn't overwhelm the write throughput on the destination end? The man pages didn't list anything, but there might be something I'm overlooking.

  Read the article

• How to take search query and append modifers to the end of it

  - by Kimber

  This is a greasemonkey question. What I'm trying to do is modify an old google discussions script. What were wanting to do is be able to take the google search query and add modifiers to the end of it. Like this: search query: "superuser" modifiers: inurl:greasemonkey+question end result: "superuser" inurl:greasemonkey+question The old script creates a new div within the "hdtb_more_mn" element which is where you get the new discussions tab. However, since the "tbm=dsc" option to do a discussion search has died, this script no longer works. Hence the need to add modifiers to your searches. I tried to edit the script, but it appends the modifiers to the end of the url which includes "&client=firefox-a&hs=8uS&rls=org.mozilla:en-US:official". This means you're also searching for the above as well as your query, which doesn't work. I would like to be able to append the modifiers @ the end of the search querty, rather than the whole URL. I'm just not sure how to code it to where it adds the below "&tbm=" stuff within "discussionDiv.innerHTML" to the end of the query. The google search id seems to be, "gbqfq" for the search box, but I'm not sure how to add this id. Here is the old script // ==UserScript== // @name Add Back Google Discussions // @version 1.4 // @description Adds back the Discussion filters to Google Search // @include *://*.google.tld/search* // ==/UserScript== var url = location.href; if (url.indexOf('tbm=dsc') < 0) addFilterType('dsc', 'Discussions'); function addFilterType(val, name) { var searchType = document.getElementById('hdtb_more_mn'); var discussionDiv = document.createElement('DIV'); discussionDiv.className = 'hdtb_mitem'; discussionDiv.innerHTML = '<a class="q qs" href="'+ (url.replace(/&tbm=[^&]*/g,'') + '&tbm=' + val) +'">'+name+'</a>'; searchType.innerHTML += discussionDiv.outerHTML; } Thanks for any help, or suggestions on who to ask. Google Chrome has an extension for discussion searches, but FF doesn't seem to have one as of yet, which is why I'm trying to modify the above.

  Read the article

• Formula-based Excel page headers

  - by Jake Krohn

  I'm using the "Rows to repeat at top" function in Excel's "Page Setup" dialog to ensure that a multi-row header block appears on every printed page of my worksheet. However, I'd like to be able to change certain bits of the header based on the content of the current page. I would simply like to display the value of one cell in the first row that is printed on the page. If this is my header: Section: xx And the data looks like this (columns are Section and Name): 1 Foo 1 Bar 2 Baz I want the "xx" in the header to be "1". If, further down on the next page, the value in the Section column is "3", I want that printed in the header of the next page. I originally thought that using the "OFFSET" function might help, e.g. ="Section: "&OFFSET(A2, 1, 0) But it only shows the offset from the original placement of the header, thus only working on page 1. The end document is a PDF, so right now I'm able to go back in with the "TouchUp Text Tool" in Acrobat and add the numbers page by page. But it gets to be a tedious process with 70+ page reports. Anyone have any better ideas that don't require me mucking up the original Excel document with inserted headers every N lines? This is Excel 2008 for Mac, if it makes a difference.

  Read the article

• Custom Dreamweaver DocTypes

  - by Hugh Guiney

  Dreamweaver CS5 with Dreamweaver HTML5 Pack 1.2.7 Windows 7 x64 When I go to create a new document and select the HTML5 DocType, Dreamweaver gives me the legacy encoding/character set declaration: <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> I want to replace it with the new, abbreviated style: <meta charset="utf-8"> The relevant file seems to be %ProgramFiles(x86)%\Adobe\Adobe Dreamweaver CS5\configuration\DocumentTypes\NewDocuments\Default.html, which has a blank charset, that is then apparently replaced with the appropriate character set dynamically: <meta http-equiv="Content-Type" content="text/html; charset="> I changed it, but then new documents show up like this: <meta charset=""> <title>Untitled Document</title> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> It seems Dreamweaver added the legacy declaration back in after my modification—and as far as I can tell, there's no way to specify that the charset definition should go in-between the quotes, either. Additionally, any modifications to Default.html apply to every DocType, whereas I only want this change to apply to the HTML5 DocType. Is there anything in the configuration files that would allow me to make any of these customizations? If not, is there an extension that does it?

  Read the article

• Why is the `remove rows` button not always present in MySQL Workbench?

  - by Shawn

  I'm using MySQL Workbench to remove rows from a table in my database. Most of the time, I will simply write a select statement, then select the rows I want to erase and use the remove rows button (circled in the screenshot below). But sometimes (quite often actually), the remove rows button does not appear. Instead, I get something like the screenshot below: The remove rows button is not there and the remove rows option is grayed out in the context menu, so basically, I can't remove rows... The only way I've found of solving this issue is to run the select query many times until the button appears (it usually does after 3 of 4 times). Does anyone know why this is happening? UPDATE Today, I've been running a select query dozens of times and the button never appears. It seems my incomprehensible workaround no longer works... Help! btw: Using a delete statement does work, though I would rather not have to write one for each row I want to remove as this happens quite frequently during development...

  Read the article

• Is Ubuntu a viable replacement of Windows XP for small enterprise environments?

  - by Alex. S.

  Hi all, I'm a newbie systems administrator, so any advice would be great. I would like to setup ubuntu 8.04 lts in a small office of consulting in management (around 50 workstations) instead of Windows XP. I would install MS Office 2007 via WINE (*). It would be a fresh installation, so the migration would be less of a pain. The new setup would also include a small server as document repository and a backup server by now. Later, I would install another goodies like a IM server, a document management solution, and whatnot collaborative tool. What do you advice in this scenario? Do you think is viable? Should I try to convince my managers this is a good idea? I consider myself as a fair experienced user in both systems, and I'm the only guy in charge of everything. I need to cut costs down, and I think that antivirus and antimalware software are a waste of money and time. Is this good idea?, or should I resign and try to lock down the Windows systems and install AV software? Is there anything else in this setup I'm not foreseeing? (*) The only catch in my test machine until now had been that Office SmartArt doesn't work properly, the rest of Office 2007 may seem ok.

  Read the article

• 7ZIP - Command Line Compression | Can Never Keep it Simple

  - by OneTwoYou

  I've been Googleing for a few hours on how to just compress a file inside a directory and I can't find anything. I found how to just compress a folder in general. Now I wish to know how I can compress a folder in a folder with a file. Current code: 7zG.exe a -tzip "test.zip" dontcompressme/compressme/new.txt pause As you can see above, I don't want to compress the first folder, but only the second and what ever is within that folder. I have the 7zG.exe sitting in the main folder and I have some files that are three folders in, but I don't know how to only compress those. Here is my directory list: Folder One (don't compress) Folder Two (don't compress) Folder Three (okay to compress) Document One.txt (okay to compress) Document Two.txt (okay to compress) Index.html (okay to compress) Does anyone know how I can do this in the most simplest way ever invented by man? Cause whenever I go to a website using Google it goes throw all these methods on how to compress a folder, but not do it the way I wish it to do. It makes me kinda upset cause I can't get a simple and straight forward answer. Thank you if you answer my question.

  Read the article

• QR Codes Printing, but Not Printing Correctly - Any Ideas?

  - by SDS

  I am mail merging some QR codes via file paths stored in Excel into a label template in MS Word 2013. I have the whole process with the Ctrl+F9 working properly, but I am stumped on this: On the 30 label sheet I am trying to print I have 6 labels that are repeating information, and stored in duplicated rows in Excel for this print job. All of the labels have 2 images on them, one is a logo and the other one is a unique QR code for that person. For the first set of 6 labels that print out, everything works perfect. However, from the 2nd time the information is printed onward all of the merged fields and logo look correct, but the QR codes are printing strangely. Basically it's the QR code as I want it, but with a copy of itself covering the top left 25% of the QR code. Print preview doesn't show this happening, only once it's printed does it come out like this. I've been trying everything I can think of to fix this and don't know what to do. So far I've: Recreated the document several times, tried duplicating the images in the source folder and giving the links in the Excel document new file paths in case the mail merge feeding from the same .jpg was an issue (even though it's not a problem with the logo) Any help or insight is greatly appreciate because this is a test run for a larger batch run that I need to get done soon :( Thank you!

  Read the article

• Would an array of SSD drives be able to succesfully substitute the system memory?

  - by Florin Mircea

  I watched a few videos trying to answer this. This video (youtube.com/watch?v=eULFf6F5Ri8) shows a bunch of guys stacking 24 SSD's reaching a peak of around 2GBps r/w. That's under the limit of the worst DDR3 in this list (memorybenchmark.net/write_ddr3_amd.html) - that shows DDR3 memory performance varying from 2.78 to 6.55 Gb per second, but that video is over 3 years old. This video (youtube.com/watch?v=27GmBzQWwP0) shows a more optimistic situation, but for PCI-E SSD drives: 5 drives peaking at around 4Gb. And this other video shows that stacking up more than 3 SSD's doesn't realistically offer a substantial added performance. This and the fact that in all benchmarks the drives act quite poorly when dealing with small files (5k file read/write averaging from 10MB to around 30-40MBps) as opposed to how native memory handles such files, seems to indicate a definite NO to this question. Also, the write life cycle is indeed limited and the drives might wear out quickly, as kindly pointed out by paddy. However, I wanted to get more opinions on this. Would it be possible to at least obtain current memory performance with SSD's in RAID 0? And if so, in what circumstances? I am assuming using this configuration with a Windows OS that has a memory pagefile resident to that stack of SSD's, thus making it very fast to work with.

  Read the article

• Apache https is slsow

  - by raucous12

  Hey, I've set apache up to use SSL with a self signed certificate. With http (KeepAlive off), I can get over 5000 requests per second. However, with https, I can only get 13 requests per second. I know there is supposed to be a bit of an overhead, but this seems abnormal. Can anyone suggest how I might go about debugging this. Here is the ab log for https: Server Software: Apache/2.2.3 Server Hostname: 127.0.0.1 Server Port: 443 SSL/TLS Protocol: TLSv1/SSLv3,DHE-RSA-AES256-SHA,4096,256 Document Path: /hello.html Document Length: 29 bytes Concurrency Level: 5 Time taken for tests: 30.49425 seconds Complete requests: 411 Failed requests: 0 Write errors: 0 Total transferred: 119601 bytes HTML transferred: 11919 bytes Requests per second: 13.68 [#/sec] (mean) Time per request: 365.565 [ms] (mean) Time per request: 73.113 [ms] (mean, across all concurrent requests) Transfer rate: 3.86 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 190 347 74.3 333 716 Processing: 0 14 24.0 1 166 Waiting: 0 11 21.6 0 165 Total: 191 361 80.8 345 716 Percentage of the requests served within a certain time (ms) 50% 345 66% 377 75% 408 80% 421 90% 468 95% 521 98% 578 99% 596 100% 716 (longest request)

  Read the article

• How to add extensions to a lot of files using content of each file?

  - by v8media

  I've got over 10,000 files that don't have extensions from older versions of the Mac OS. They're extremely nested, and they also have all sorts of strange formatting and characters. They don't have file types or creator codes attached to them any longer. A great deal of these files have text in the file that will let me determine extensions (for example Word.Document.8 is in every file created by that version of Word, and Excel.Sheet.8 in every file created with that version of Excel). I found a script that looks like it would work for one of these file types at a time, but it erases parts of filenames after nefarious characters, which is not good. find . -type f -not -name "." -print0 |\ xargs -0 file |\ grep 'Word.Document.8' |\ sed 's/:.*//' |\ xargs -I % echo mv % %.doc So, two questions from that: One is, should I clean the characters in the filenames first, or programmatically deal with those in the script in order to leave them the same? As long as I lose no information from the filenames, I don't see a problem cleaning out slashes and other problem characters. Also, if I clean the filenames, there are likely to be duplicates, so any cleaning script would have to add something like "-1" before the extension to make sure nothing gets lost. 2nd question is how do I change the script so that it will look for more than one file type at the same time and give each the proper extension? I'm not tied to this script, but it is understandable, which is a pro. Mac OS X 10.6 is installed on this file server, but I've got access to any recent versions of OS X. Thanks, Ian

  Read the article

• proftpd initial directory for each user

  - by Dels

  After successfully setting up proftpd server, i want to add initial directory for each users, i have 2 user, webadmin that can access all folder and upload that can only access upload folder ... # Added config DefaultRoot ~ RequireValidShell off AuthUserFile /etc/proftpd/passwd # VALID LOGINS <Limit LOGIN> AllowUser webadmin, upload DenyALL </Limit> <Directory /home/webadmin> <Limit ALL> DenyAll </Limit> <Limit DIRS READ WRITE> AllowUser webadmin </Limit> </Directory> <Directory /home/webadmin/upload> <Limit ALL> DenyAll </Limit> <Limit DIRS READ WRITE> AllowUser upload </Limit> </Directory> All set ok, but i need to tell my ftp client initial directory for each user (otherwise it keep fail to retrieve directory), which i think it should be automatically set for each user (no need to type initial directory in ftp client)

  Read the article

• Office documents on intranet all requiring second login and can't pass auth? Disable webdav?

  - by DOTang

  I am not sure what is going on, but recently all the Office documents on our intranet get prompted a second time for login and according to the error logs it looks like it's trying to use webdav to open (an editable?) version of the document to save directly on the server? We have no sharepoint server setup or anything, but this shouldn't be happening. All I want is for the document to be saved or opened from a local copy in temp like normal. Here is the log: Line 57499: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 Line 57500: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 Line 57501: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 The log basically contains a bunch of these. How can I disable this behavior so that office documents that are downloaded aren't attempted to be used through webdav?? Edit: I should clarify behavior, it asks if you want to save or open it, upon choosing open open, it asks to re-authenicate, you put in the user information and the login box comes up 3 times acting like you entered the wrong password. For some users, after passing the login box the third time, it still opens up, for others their browser just locks up. It also doesn't even look like webdav is installed on our server, I see no config options in IIS for it as outlined on this page: http://learn.iis.net/page.aspx/350/installing-and-configuring-webdav-on-iis-7/#001

  Read the article

• How to simulate Apache [END] flag on a redirect?

  - by Javier Méndez

  For business-specific reasons I created the following rewrite rule for Apache 2.2.22 (mod_rewrite): RewriteRule /site/(\d+)/([^/]+)\.html /site/$2/$1 [R=301,L] Which if given an URL like: http://www.mydomain.com/site/0999/document.html Is translated to: http://www.mydomain.com/site/document/0999.html That's the expected scenario. However, there are documents which name are only numbers. So consider the following case: http://www.mydomain.com/site/0055/0666.html Gets translated to: http://www.mydomain.com/site/0666/0055.html Which also matches my rewrite rule pattern, so I end up with "The web page resulted in too many redirects" errors from browsers. I have researched for a long time, and haven't found "good" solutions. Things I tried: Use the [END] flag. Unfortunately is not available on my Apache version nor it works with redirects. Use %{ENV:REDIRECT_STATUS} on a RewriteCond clause to end the rewrite process (L). For some reason %{ENV:REDIRECT_STATUS} is empty all the times I tried. Add a response header with the Header clause if my rule matches and then check for that header (see: here for details). Seems that a) REDIRECT_addHeader is empty b) headers are can't be set on the 301 response explicitly. There is another alternative. I could set a query parameter to the redirect URL which indicates it comes from a redirect, but I don't like that solution as it seems to hacky. Is there a way to do exactly what the [END] flag does but in older Apache versions? Such as mine 2.2.22. Thanks!

  Read the article

• Manual Http error response code in non-existent folder via routing

  - by Slytherin

  Apache server running on ubuntu-like linux I am getting unexpected behaviour when i try to manually send error response. If my .htaccess is responsible for the error response , then appropriate error document is loaded and displayed , with according response code in browser console. However , if my router is origin of the response code , then i get blank screen , but correct response code. .htaccess looks like this RewriteEngine On # RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule !\.(css|js|icon|zip|rar|png|jpg|gif|pdf)$ index.php [L] ErrorDocument 404 /err/404.html ErrorDocument 403 /err/403.html ErrorDocument 500 /err/500.html part of my router that sends the response is the following header("HTTP/1.1 403 Forbidden"); trying this format didnt help either header("HTTP/1.1 403 Forbidden", TRUE, 403); I also tried HTTP/1.0. Furthermore i was thinking that maybe relative path to error page might be an issue , but discarded this idea after attempting to access a document that is forbidden via .htaccess EDIT I should also point out , this scenario happens when URL for not-existing article is requested. Is it possible that Server is looking for a .htaccess file in a folder based on URL ? Eg: domain/blog/non-existent , is server looking for blog folder ? I am specifically asking this because there is no blog folder

  Read the article

< Previous Page | 409 410 411 412 413 414 415 416 417 418 419 420  | Next Page >