Search Results

Search found 19768 results on 791 pages for 'hardware programming'.

Page 413/791 | < Previous Page | 409 410 411 412 413 414 415 416 417 418 419 420  | Next Page >

  • Repair BAD Sectors or Buy a new HDD?

    - by Nehal J. Wani
    I have a Seagate internal hard disk drive. I recently opened up my laptop [Dell Inspiron N5010] [Warranty has expired], cleaned it and it worked normally after waking up from hibernation. However, when I restarted it, it stuck on windows loading screen, then tried to boot from Dell recovery partition but failed. It gave the error: Windows has encounter a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred. While cleaning, I had mistakenly touched the round silvery thing at the bottom of the HDD. I don't know whether this has caused the problem or not. Since I have Fedora also installed in the same HDD, I can boot from it but it shows weird read errors when I ask it to mount Windows partitions. The disk utility also says that the Hard Disk has many bad sectors and needs to be replaced. I downloaded Seatools from Seagate website and used it. In the long test, I gave it permission to repair the first 100 errors which it did successfully. Now I am confused at what I should do. Internal Hard Disk Costs: a. Internal HDD 500GB Costs: Rs3518 b.1 External HDD 500GB Costs: Rs3472 b.2 External HDD 1TB Costs: Rs5500 c. Internal to External Converter Costs: Rs650 I have the following options: (i) Buy an External HDD, backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to buy another internal HDD and replace the damaged one. OR break the seal of the external one and put it inside my laptop as internal. Breaking the case involves risks. (ii) Buy a Internal HDD and an Internal to External Converter Case [Not very reliable], backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to just put in the new internal HDD I just bought. Experts, please guide me as to what will be the most VFM option? Also, if a HDD is failing, is it that I shouldn't read from it too otherwise there is a chance of other sectors failing? What I mean is, is it wrong to read from the HDD without taking backup first?

    Read the article

  • Creating rescue / install USB flash disk for CentOS

    - by wwwpanda
    For CentOS installation CDs, you can install OS, as well as booting into "rescue" mode so that you can do a chroot mount on the system partition for problem solving, even the system is installed in hardware RAID drives. How can we create a similar thing but on usb flash drive? I tried to do it with unetbootin, but when booting into the USB, eventually the CentOS setup still requires presence of CDs. Ultimately, I want to use this usb flash drive for remote disaster recovery through say HP iLo remote console / Dell iDrac etc.

    Read the article

  • How can I see a visual overlay of shortcut keys I've pressed?

    - by lyricsboy
    I've seen several screencasts (recorded on Mac OS X) which show a nice little "toast" indicating which shortcut key is being pressed by the screencaster, typically in the middle of the screen. Is this a feature of the screencasting software? Is there an app that does this that stands alone? I regularly do presentations for programming classes, and I want a way to show my audience what shortcuts I'm activating.

    Read the article

  • I am getting unmountable_boot_volume STOP 0x000000ED

    - by waterfalrain
    I read somewhere that the Ultimate Boot CD can diagnose computer problems. In this case would this program help me get my Windows XP back? When I turn on the screen and hit "Start Windows Normally" or go to Safe Mode I get a flash of the WinXP logo and then it goes to this error page. Can you tell from this message is it a hardware or software issue?

    Read the article

  • Windows 7 Virtual PC + Linux Ubuntu

    - by Daniel Henry
    I've installed Ubuntu inside a virtual machine running on Windows 7's Virtual PC. One thing I've noticed right away is that it has to capture the mouse and not all the hardware works as expected. I didn't have such problems in my virtual Windows XP. Is there anything I need to do to either Virtual PC or within Ubuntu that will get them to cooperate as well as Windows XP seems to?

    Read the article

  • Maximum number of hard drives in a build-your-own NAS solution [closed]

    - by groovehunter
    My IT department has a bunch of older 160/320GB Drives. I'd like to use them in a build-your-own NAS device. What limitations exist in regards to the maximum number of drives that can be connected to typical commodity hardware that might be used in a situation like this? EDIT okay I like to specify my question is what to search for to find a storage controller which can handle many drives. I simply cannot find the right search terms.

    Read the article

  • Runs perfect but I can't reinstall my OS.

    - by Kravlin
    hey, I have a computer that seems to have faulty hardware. I can run operating systems off of the computer and it runs perfectly, however, whenever i boot from CD to try and install a different operating system the thing tells me that the system never responds. Linux hangs after 30 seconds, windows just freaks out. I think it's a problem with how it's connecting to the hard drive. Is it possible it's just the IDE cable or do you think it's something else?

    Read the article

  • How to figure out disks performance in Xen?

    - by cpt.Buggy
    So, I have a Dell R710 with PERC 6/i Integrated and 6 450Gb Seagate 15k SAS disks in RAID10, I have 30 Xen vps working on it. Now I need to deploy second server with same hardware for same tasks and I want to figure out maybe it's a good idea to use RAID5 instead of RAID10 because we have a lot of "free" memory on first server and not so much "free space". How do I find out disks performance on first server and find out could I move it to RAID5 without slowing down of whole system?

    Read the article

  • Verizon FiOS Speed concerns

    - by Josh K
    I'm working on getting a separate internet connection to run out and I was looking into available options. FiOS claims to offer 25Mb up / 25 Mb down as a maximum rate. Do they have listed minimum rates? Is there anything with fiber I should be concerned about? Special hardware, special routers, availability concerns?

    Read the article

  • Recovering from backup without original install media

    - by KGendron
    A machine from my old job had a complete hard drive failure. I have backups but I'm running into severe problems restoring from them. The only install media was a secondary restore partition on the system's hard drive. I hate whoever came up with that idea more than i can possibly express with words. I spent several days trying to recover the disk - it is pretty well shot and none of my best tricks could even get it to show up in the bios/ The machine that broke is an hp with xp media center edition on it (I don't know why either). The backups were created using the default windows backup tool - I have .bfk file on an external hardrive that i am trying to restore from. I've replaced the hard drive. My home machine is running windows 7 64bit and i'm trying to use it as a platform to restore to the other disk. I downloaded the window 7 nt-restore utility, however no matter what i do it restores to my C drive rather than the specified drive. Fortunately win7 security settings prevented it from being a complete disaster - but still not a happy thing. I tried firing up the xp virtual machine. I can browse to the backups but it says they are invalid and refuse to let me view/ continue with the restore. I tried installing XP to an extra harddrive on my machine - however it bluescreens on me during the install process and I cry. I tried installing xp pro to the new drive and attempted to restore over it, it of course blackscreened on me as that was a stupid idea. I made two partitions on the new hard drive (Apparently the bios on this accursed piece of junk doesn't allow hd partitions larger than 200G anyways and thus fails 40 minutes into the install with an ever-descriptive "Disk Read Error". Guess how i spent last weekend? My last idea was to install xp pro to the second partition and then use it to restore from backup to the first. After the first restart it gives me the error "Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware". My brain made one of those bad hard drive clicky noises. I've tried several boot disks but they don't seem to work. If anyone has a link to a good one it would be greatly appreciated. Anyone have any more ideas? - I really hate asking on what seems like such a simple issue but i am quite literally at my wit's end. Thanks - and sorry for the really long post.

    Read the article

  • Easy way to switch default sound output device

    - by robertpateii
    I want an easier way to change my default sound device from my sound card to my usb headset. Currently it takes a very precise right click, a left click, another right click, and two more left clicks. Ideally i could just have it swap with a shortcut key. (it was a little easier in XP but not by much.) A software solution is preferred, but I am open to suggestions that use hardware. I am running Windows 7 currently.

    Read the article

  • How do I program the Sparkfun Arduino Pro Micro with Linux?

    - by zeldarulez
    Sparkfun's Arduino Pro Micro was the ideal choice for me (in size and price), but I cannot figure out how to program it on anything other than Windows. Sparkfun doesn't provide any resources on how to program the Arduino Pro Micro on Linux, and there aren't any direct resources on the Internet for installing drivers/ programming it. Hoow do I program the Arduino Pro Micro with Linux? Thanks! Note: My OS is Ubuntu

    Read the article

  • How can I find which drivers are the correct ones for my machine?

    - by tombull89
    I'm currently installing Windows 7 onto a new laptop before imaging it to deploy. I need to install the Wireless and Graphics drivers, but the HP site is offering me both ATI and Intel graphics drivers (at 102MB and 470(!)MB) a pop, as well as Intel, Broadcomm, RealTek and Atheros wireless drivers. Is there a bit of software that will tell me what devices are in the machine so I don't have to go through, trial-and-error and find which is the right driver for the hardware?

    Read the article

  • How to limit a process to a single CPU core?

    - by Jonathan
    How do you limit a single process program run in a Windows environment to run only on a single CPU on a multi-core machine? Is it the same between a windowed program and a command line program? UPDATE: Reason for doing this: benchmarking various programming languages aspects I need something that would work from the very start of the process, therefore @akseli's answer, although great for other cases, doesn't solve my case

    Read the article

  • Could not load drivers - Code 31

    - by alexander7567
    I get this error when installing any network adapter on my computer: The device is not working properly because Windows cannot load the drivers required for this device. (Code 31) I have tried many different adapters and many different drivers. Any ideas? OS: Windows XP Home SP3 Here is the Hardware IDs for the onboard NIC: PCI\VEN_8086&DEV_1050&SUBSYS_2019107B&REV_02 PCI\VEN_8086&DEV_1050&SUBSYS_2019107B PCI\VEN_8086&DEV_1050&CC_020000 PCI\VEN_8086&DEV_1050&CC_0200 Device Manager Screenshot

    Read the article

  • How to move partition with Users to a new SATA controller?

    - by Al Kepp
    Our current situation: X79 chipset. Windows 7 installed on SATA SSD running on Marvell controller. C:\Users contains just Public and computer-name folders, all the other users are created in E:\Users. That partition is on two HDD's running on an Intel RAID controller. (The motherboard has got two SATA/RAID onboard controllers.) The goal is: Without reinstallation, I want to move SSD to a standard SATA controller. Then I want to get rid of RAID1, and move one HDD to the same internal Intel SATA controller and the current E:\Users move to that new place. I want it to stay as E:\users, but I need to reinstall the HDD to let it work in SATA mode without RAID. So I face several problems. I am sure all are solvable with free software utilities, but I don't know how exactly to do it. I can see the particular problems: I have got all users at E:\Users. When I turn off that E:\ disk, I won't be able to login to Windows. I need at least one admin account to be placed back at C:\users. The current C: runs on standard 120 GB SSD, but it is connected to a Marvell SATA/RAID controller. I am affraid the Windows won't let me put it to Intel SATA controller due to hardware/licence check, and I won't be able to use standard W7 recovery disk either, because there probably isn't marvel SATA/RAID driver on it. I haven't tried anything yet, because I am affraid I can end up with computer not working at all. (I want to move it to a standard ICH10 Intel SATA controller to let us have no problems in future with it. I think it is not very safe when we use any nonstandard hardware to boot the computer.) I need to somehow backup current E:\ disk and restore it to a new E:. I hope this will be the easy part (as long as the admin account will reside on C:). The E: RAID array is very large, but it is almost empty (less than 100 GB of data.) So I can make the partition smaller so it can easily fit to a single SATA HDD.

    Read the article

  • How to link processing power of old computers together?

    - by redIago
    Hey all, I'm sitting on 8 old computers of varied sorts that are more or less useless at this point for any other purpose really. Is there a way I could link their hardware or processing power or whatever together over wifi and use one as like a central computer? Like it would be cool to distribute the processing of some video game or encryption generating program over the collective computers. Any way to do all this? Thanks.

    Read the article

  • Websites that introducing new stuff

    - by user33929
    Is there any blog/website that introducing new funny/fancy websites or new tech (software/hardware)? I am talking about the site that may introduce digg.com, superuser.com, mint.com or delicious.com when these site first come out. Also, introducing new handy/useful 3rd party applications/tools. Thanks.

    Read the article

  • How to fix winlogon.exe randomly crashing/hanging my computer?

    - by Neeb
    I've got these problems: 1) sometimes winlogon.exe crashes at boot-up and my whole computer shuts off once i click "no" to visual-studio-2008 just-in-time-debugger window, takes about 30 secs until my harddrives starts up again, its really scary, i am afraid it is causing hardware malfunctions in long term. this has happened dozen of time now. 2) sometimes i leave the computer alone a while, i come back and i notice ctrl+alt+del doesnt work and winlogon.exe is using 100% of one of my 4 cores.

    Read the article

  • Using Lan Management port - which kind of switch for remote control?

    - by zephyrus
    Hello everyone, I have no expertize in server hardware, however i have some IBM X3550 7978 and HP DL 160/G6 servers with 2 Lan ports, and a management port (that seem to be another Lan port). Have anyone tried to use the management to control remotely the low level functions of the servers (reboots for example) ? Which kind of switch or other devices have you used for this? thank you Massimiliano

    Read the article

  • easiest way to automate all software installations for new users/computers?

    - by sorrrydoctorforlove
    Basically, for every new user we have about 30 different installers that all need to be run manually after an install of windows which is tedious/time consuming. We can't simply ghost/image the computers as they come because of the wide variety of hardware being used (all laptops). What would you suggest to run through all the installers automatically without requiring me to sit and click 'next'.. 'next'.. 'continue'.. 'no dont install msn toolbar please'?

    Read the article

  • Removing raid 1 (mirroring) and leaving data on both drives

    - by ajma
    Hello, I have two drives in a raid 1 (mirroring) array. Hardware raid using whatever is built into an Intel motherboard. (asus P5BE) I'd like to remove one drive but keep the data in both (I want to put one of the drives into another machine). Can I go into the raid configuration and remove the array and have the data remain?

    Read the article

< Previous Page | 409 410 411 412 413 414 415 416 417 418 419 420  | Next Page >