Search Results

Search found 37931 results on 1518 pages for 'computer case'.

Page 414/1518 | < Previous Page | 410 411 412 413 414 415 416 417 418 419 420 421  | Next Page >

• How can laptop keyboard keys be removed and replaced?

  - by Lord Torgamus

  I'm trying to fix a laptop keyboard that has issues with keys on its left side. Just by feel, it's clear that something sticky got under there. There could be something crunchy too, but that might just be the sound of the key's spring releasing itself from the sticky. I don't know the cause because it's not my computer and the owner isn't sure, but I'm guessing soda spill for now. The computer is an HP dv2500. I've removed the keyboard and blown under it but that hasn't helped. I didn't use compressed air because I just don't have any available, but I suspect it wouldn't help with sticky. So, I'd like to pop they keys off and clean with damp cotton swabs or similar. Is there a proper way to remove the keys? I've found some instructions via Google for non-laptop keyboards, but they don't seem like they'd work for me. Alternate solutions to the problem also welcome, but I've been curious about how to remove the keys for some time for other reasons.

  Read the article

• Windows media scaling/interpolation method

  - by MichaelH

  Usually in Windows, if videos or other media is upscaled from a certain resolution to a higher resolution (e.g. "monitor size"), a bilinear filtering algorithm or similar is used, such that the upscaled material doesn't look blocky. On my system however, the used interpolation algorithm changed from 'bilinear' to 'nearest neighbor' at some point, with the effect that upscaled videos (e.g. viewed in MPC or WMP, and also Skype video streams) and games (e.g. from PopCap) appear rather blocky. Not sure what the common factor between those is, could be DirectShow(?). I am not aware of having changed any setting that could have affected this state, in fact I am not even aware such a setting exists. I'm guesing that some installed software must have changed something on my computer. My computer is running Windows 7, but I had already experienced the same effect on an XP machine some while ago, where it changed back again to the more pleasing bilinear interpolation after a while, as magically as the first time. What could be wrong with this installation, and how can I change this upscaling interpolation behavior?

  Read the article

• what type of laptop do I need to run a amd64 or i386 VM?

  - by Frank Schwieterman

  I was running an amd64 build of Ubuntu on a VM on a Windows host which was also amd64. Later I found I could not run the same amd64 iso on my laptop, which is intel without hyper-V. I was confused I thought chipset mattered, but maybe it does not. When buying a PC or Apple, is there anything to check about the chipset to make sure it can run different types of VMs? In my case, I was trying to run ubuntu on a Thinkpad T520. Per answer below, I did need to enable some bios settings. I'm still having some issues. Running ubuntu on virtual box, when I try to use ubuntu-12.10-server-amd64.iso for the CD/DVD device to start a new VM, virtualbox complains "Failed to open the CD/DVD image . Could not get the storage format of the medium (VERR_NOT_SUPPORTED). When I try to use ubuntu-12.10-server-i386.iso the ISO is accepted, but then the VM complains "FATAL: No bootable medium found! System halted." I had been using an amd64 iso on my home PC which is amd64 and it works fine, which is why I suspected CPU mismatch was the problem at first. But it seems like I'm having issues, and maybe this superuser thread can be used to verify the cpu is irrelevant in this case.

  Read the article

• "Ethernet" doesn't have a valid IP configuration

  - by Xuzuno

  I'm using an ethernet cord to connect to my internet and it has been working well until Thursday morning when I turned on my laptop (Windows 8) to see a yellow triangle sign in the bottom right hand corner, in front of the ethernet connected symbol. Since then I haven't been able been able to access the internet from my computer. When I hover over it, it says that it is an "Unidentified network" and there is "No internet access". I've run the Windows 8 troubleshooting and it says that the problem found was ""Ethernet" doesn't have a valid IP configuration", but I'm unsure how to fix it. I'm thinking that the problem is to do with my computer rather than my network, because I've tried another laptop (Windows 7) through the same ethernet cable and connection and the internet works fine on the other laptop. I've tried so many fixes that I've found online, with none of them actually working. Yesterday I even tried a full system reset, where I re-installed Windows 8, re-partitioned and wiped everything off the hard drive, but it still appears have the exact same problem. Today I also purchased and tried a new ethernet cable which didn't work, so I then purchased a USB to Ethernet adapter, to make sure that it wasn't my ethernet port on my laptop that was faulty. That didn't work either, and the same problem still remains. I feel like I've tried everything, so can someone please help me?

  Read the article

• Mac dev folder missing, SSH not working

  - by SamGoody

  A few days ago, SSH stopped working. When I try logging in a get the following message: PTY allocation request failed on channel 0 stdin: is not a tty fatal: unrecognized command '' Connection to 74.52.61.194 closed. Web searches have shown me that there might be something wrong with /dev/std. But my computer lacks a /dev/ drive. There is an Alias to /dev/ [hidden, but I've revealed hidden files to do this search], but when I try to open it I am told that it cannot find the folder it is aliasing. Now, many a web search tells me that without a dev folder, the computer doesn't work, but it does seem to work, except the SSH. Also, are there any tools that can save my SSH preferences so that I don't have to, each time, type out the username@adrees, password, path all of which are long and complex? Not looking for a Filezilla type client, there are many of those. Looking for a command line like putty, that lets me use bash on the remote client. Am on Macbook Pro, latest version of Tiger.

  Read the article

• SQL Server Installation: Is it 32 or 64 bit?

  - by CapBBeard

  Hi, Recently I was performing an OS upgrade on one of our DB servers, moving from Server 2003 to Server 2008. The DBMS is SQL Server 2005. While reinstalling SQL on the new Windows installation, I went to another of our DB servers to verify a couple of settings. Now, I always thought this second server was Server 2003 x64 + SQL 2005 x64 (from what I'd been told), but I now have my doubts about this. I now suspect that it is in fact only 32 bit SQL, however I'd like to verify this. Here's some details: The OS is definitely 64 bit. xp_msver shows Platform as NT INTEL X86 SELECT @@VERSION shows Microsoft SQL Server 2005 - 9.00.4035.00 (Intel X86)... However sqlservr.exe is not shown with '* 32' in taskmgr, does anyone know why this is the case, if it is in fact 32 bit as claimed? Despite this, it does seem to be running out of the x86 program files folder. If I do the same checks on a confirmed 64 bit installation, it does give back the expected 64 bit readings, which can only prove that this server in question is only running in 32 bit. Now, that being the case, the question arises about how much memory this '32 bit' install can use. Task manager reports about 3.5GB memory usage for sqlservr.exe (The server has 16GB physical). I suspect that AWE has not been configured at all, and therefore the server will be significantly under-utilised (remembering that the OS is 64 bit) if SQL is simply using a 32bit address space. Is this assumption correct? I feel the server should have SQL reinstalled as 64 bit in order to fully utilise the hardware platform, however it is currently heavily in production; this will be no easy task. I suspect we may just have to configure AWE correctly and let it be for the time being (Unless this is a bad idea?). I apologise that this question is a little vague/lost; I'm no SQL expert, just trying to get a handle on what's going on here.

  Read the article

• Application Virtualization

  - by Peter Versnee

  I have been looking for a solution to virtualize my desktop application as a SaaS. After picking Citrix XenApp as the best solution for my case and trying for ever to get it to work (with some more experienced people) I can't help but to conclude that Citrix has too much problems for my case. Every time I fix one thing some other thing pops up. As I can't imagine Citrix XenApp is the only way to deliver my application to my clients, I'd like to ask you experienced guys if you think there is an other way to deliver it whilst meeting my requirements. I've got no money issues - time on the other hand... My requirements: My application must run on a windows server; The application should be virtualized with the application window only (no desktop); Content Redirection (my application is the only one virtualized, so PDF, DOC(X) etc. is on the users' system); Easy user management; SSO;* Cross platform (Windows, Linux, Mac OSX).* I truly hope I don't annoy you with another of the same question. I've tried to find the same question here and - obviously - didn't found it. *) these I can live without, however very much appreciated

  Read the article

• how do you view / access the contents of a mounted dmg drive through TERMINAL hdiutil diskmount

  - by A. O.

  My external USB drive failed. I made a .dmg image file of the drive using disk utility. Later I was not able to mount the .dmg image. I used terminal hdiutil attach -noverify -nomount name.dmg diskutil list diskutil mountDisk /dev/disk4 then received the following message: Volume(s) mounted successfully However, I cant see the drive or access its contents through Finder. DUtility shows the drive as ghost but I still cant mount it using diskutility. Terminal tells me that the drive is mounted and constantly shows it in the diskutil list. pwd is not the mounted .dmg image. I dont know how to enter into the mounted image drive to see its contents. So in case what I said sounds like I see the files in the mounted image no this is not the case. I do not know how to access or even change the pwd within Terminal. I was hoping to see the mounted drive tru finder but I do not see that. So I need help as to how to find a way to access the mounted image drive if it was really mounted. Terminal says that it was and it shows it under diskutil list as a /dev/disk4. Can someone please help me access the files on this drive?

  Read the article

• Strange Behaviour with Unicode Characters in Windows

  - by open_sourse

  Ok, I do not know if this is a programming question, but it certainly is a technical one so I am asking it here. I was working on some internationalization stuff in my PHP code, and in order to ensure that my generated HTML shows up Unicode correctly based on the encoding and stuff I decided to add some Chinese text to my PHP page, which then echoes it into the browser to complete my test case. So I went into google and typed "Chinese", copied the first Chinese text that the search returned (which was ??/??). I then copied it into Notepad++ which is my editor, and to my surprise showed up as boxes similar to [][]/[][]. So I thought the encoding in Notepad++ was messed up and I changed the encoding to UTF-8 and UCS, neither worked. I did it fresh in a newly encoded file, still I got the boxes. The same content when I paste into Google and StackOverFlow (like I did in this posting) shows up correct Chinese! I even opened up Windows Clipboard Viewer and the content is represented in the Clipboard as boxes! I tried pasting it into Windows Explorer address bar and using to rename a file to, but I still get boxes. But it shows up correctly when pasted into my Chrome Browser address bar! Is this a Windows issue? Since I am able to paste it correctly in SO, the data in memory should be encoded correctly right? But if that is the case why does it show up as boxes in the Clipboard Viewer? I am confused here...By the way I am using Windows XP with SP3. (I am asking this question here, even if it is not programmatic, because it is preventing me from running my programming test cases..)

  Read the article

• No boot device found. Press any key to continue

  - by Andrew Banks

  I took out the hard drive from my Dell Latitude E5420 notebook, put in an ADATA S599 solid state drive, and installed Ubuntu 11.10. When I boot, the Dell BIOS splash screen appears with a progress bar, which quickly fills up, and the screen goes black. All of this is like it was before. At this point, the OS splash screen should fade in. Instead, I was dismayed to see simply the following, in white text on a black screen: No boot device found. Press any key to continue After looking around for the Any key (just kidding) I press a key, and the Dell BIOS splash screen appears again with a progress bar, which quickly fills up, and the screen goes black. This time, however, the Ubuntu splash screen shows up, Ubuntu opens up, and all is normal. Every time I shut down, however, this happens again. It's like a game the computer and I play together. The computer has never started up without first saying: No boot device found. Press any key to continue and it has always started up after I press any key to continue. It also starts up fine if I click Restart instead of Shut Down. Thoughts?

  Read the article

• Microsoft Mouse and Keyboard Center - Slow response for App-specific shortcuts

  - by Darrel Hoffman

  So a few months ago, I bought a new MS mouse, and was surprised that they'd discontinued Intellipoint in favor of this Microsoft Mouse and Keyboard Center. It seems to have the same functionality underneath all the bloat, but there's a very serious drawback - when I set up application-specific functions for the extra buttons on the mouse, they work, but sometimes with a very long delay, like up to a minute or more. For example, I often set up the left side button as an "Undo" in various programs for convenience. But sometimes, when I try to use that Undo button, nothing happens, so I'm forced to use the standard Ctrl-Z or whatever. But then, a minute or so later, it suddenly remembers that I hit that button a while back, and calls the Undo unexpectedly on something entirely different. It's infuriating. No modern computer function should be this slow. It's not the software or the computer itself, because doing an Undo via Ctrl-Z or the menu still works instantly. It's very definitely a side-effect of delayed response to the mouse button. Usually after it delays the first time, it'll work quickly after that, but if you haven't used a given shortcut in several minutes, it "forgets" again and you get another inexplicably long delay. Intellipoint never had this problem, but it's not supported any more, and not compatible with the newer mice. Has anyone else noticed slow-downs with MS M&K C and app-specific shortcuts? Any ideas how to get around this? I use these shortcuts extensively in my workflow and it's just entirely unacceptable to have such a long delay in what should be a pretty basic feature.

  Read the article

• lenovo x1 carbon windows 8 frequent wifi disconnect issue

  - by hIpPy

  I'm having frequent wifi disconnects on my Lenovo X1 Carbon Touch laptop. I got this laptop 2 months back and it has been happening ever since about 3-5 times a day and 10 times a week on average. I've Frontier Fios internet. Power connected or not does not matter. Once I get disconnected, I try below to connect again in that order: turn Airplane mode on and off, troubleshoot network problems windows troubleshooter), restart the laptop I'd find that the WiFi adapter would get disabled and sometimes windows troubleshooting would help but more than often I'd end up restarting the laptop. A week back, I upgraded my wifi network adapter drivers (now Intel, version 15.5.6.48, 10/3/2012). I still get disconnected frequently but turning Airplane mode on and off gets me connected again. So the driver update did help. Windows 8 is updated. None of the other devices (nexus, iphone phones, nexus7, ipad tablets) would have wifi issues when my laptop would get disconnected. config: Intel(R) Centrino(R) Advanced-N 6205 (WiFi network adapter) Microsoft Windows 8 Pro Microsoft Windows [Version 6.2.9200] x64-based PC LENOVO System Model: 3443CTO X1 Carbon Touch I recently noticed this log message When I got disconnected in event viewer: Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x[XXXXXXXXXXXX]. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server. Any idea?

  Read the article

• Can a non-redundant RAID5 cause any serious problems (compared to RAID0)?

  - by leemes

  I used to have a three-disc RAID5 (mdadm) in my computer for personal media storage (music, videos, photos, programs, games, ...). It had three discs with 750 GB each, resulting in an array capacity of 1.5 TB. One day (one year ago), I needed one of those discs to install another operating system. I thought, I don't need the redundancy anymore since I backup the most important stuff (personal photos e.g.) on an external disc anyway. So I decided to remove one of the three discs without converting the RAID to RAID0 or even two separate discs, because I had no temporary storage (since one cannot simply convert the RAID5 to RAID0 AFAIK). So now, for about one year, I have a non-redundant RAID5 with 2 of 3 discs running. Sometimes, one of the discs has a defective contact at the power cable or something similar causing the drive to stop working temporarily (I don't know exactly what it is). Since it still works when rebooting the computer and in most cases by calling some mdadm commands, it wasn't that problematic. Note that the data is not very critical, since I still have a backup of the most important stuff. But in the last few weeks, one of the drives fails very frequently (every few hours), so it gets really annoying to manage this. My questions are: Is there any disadvantage (apart from the annoying management) of a non-redundant RAID5 (with one drive less than typical) over a RAID0? If I understand it correctly, both have no redundancy and the same capacity. On a temporary drive failure, I can restart the array in both cases, assuming that the drive itself still works after the failure. Can it happen that the drive contents alter on a drive failure, making the array inconsistent? If so, can I tell mdadm to check the array for failures (without a file system level checking tool)? Since the drive most probably only has a defective contact causing it to fail for a second only, can I tell mdadm to automatically restart the array, so I will not even notice the failure if no application wanted to access the file system during the failure?

  Read the article

• How to access original files from before a symlink gets updated, which have since been moved to another dir

  - by Luke Cousins

  We have a website and our deployment process goes somewhat like the following (with lots of irrelevant steps excluded) echo "Remove previous, if it exists, we don't need that anymore" rm -rf /home/[XXX]/php_code/previous echo "Create the current dir if it doesn't exist (just in case this is the first deploy to this server)" mkdir -p /home/[XXX]/php_code/current echo "Create the var_www dir if it doesn't exist (just in case this is the first deploy to this server)" mkdir -p /home/[XXX]/var_www echo "Copy current to previous so we can use temporarily" cp -R /home/[XXX]/php_code/current/* /home/[XXX]/php_code/previous/ echo "Atomically swap the symbolic link to use previous instead of current" ln -s /home/[XXX]/php_code/previous /home/[XXX]/var_www/live_tmp && mv -Tf /home/[XXX]/var_www/live_tmp /home/[XXX]/var_www/live # Rsync latest code into the current dir, code not shown here echo "Atomically swap the symbolic link to use current instead of previous" ln -s /home/[XXX]/php_code/current /home/[XXX]/var_www/live_tmp && mv -Tf /home/[XXX]/var_www/live_tmp /home/[XXX]/var_www/live The problem we are having and would like help with is that, the first thing any website page load does is work out the base dir of the application and define it as a constant (we use PHP). If then during that page load a deployment occurs, the system tries to include() a file using the original full path and will get the new version of that file. We need it to get the old one from the old dir which has now moved as in: System starts page load and determines SYSTEM_ROOT_PATH constant to be /home/[XXX]/var_www/live or by using PHP's realpath() it could be /home/[XXX]/php_code/current. Symlink for /home/[XXX]/var_www/live get updated to point to /home/[XXX]/php_code/previous instead of /home/[XXX]/php_code/current where it did originally. System tries to load /home/[XXX]/var_www/live/something.php and gets /home/[XXX]/php_code/current/something.php instead of /home/[XXX]/php_code/previous/something.php I'm sorry if that is not explained very well. I'd really appreciate some ideas on how to get around this problem if someone can. Thank you.

  Read the article

• win 7 something is causing excessive disk usage, maybe chrome?

  - by camcam

  On my Win 7 computer, this happens: I work for several hours without problems, also using Chrome Suddenly, just after refreshing a page in Chrome, disk starts being used excessively (here I can close Chrome or not, no matter, the disk won't stop) Disk diod is on all the time and I hear it running like crazy, all computer is a little slowed down It last 5-10 minutes In the meantime, I go to Windows Task Manager and observe what processes are using disk and turn them off one by one - but no success in stopping the excessive disk usage After approximately 10 minutes everything stops I go to Chrome (or re-open it) and refresh the page with mixed results - sometimes the whole process repeats immediately, sometimes not Basically, it is almost always Chrome refreshing random page that starts the excessive disk usage, but killing Chrome process does not stop the disk. Going to the same page in Firefox is not causing problems. Windows Search is turned off. I would like to know what is really happening. Perhaps there is a utility which would allow me to see which process is really using the disk, so that I can disable the service ? (not chrome, because killing chrome does not change anything) or even better, perhaps there is a way to fix it?

  Read the article

• How can laptop keyboard keys be removed and replaced?

  - by Lord Torgamus

  I'm trying to fix a laptop keyboard that has issues with keys on its left side. Just by feel, it's clear that something sticky got under there. There could be something crunchy too, but that might just be the sound of the key's spring releasing itself from the sticky. I don't know the cause because it's not my computer and the owner isn't sure, but I'm guessing soda spill for now. The computer is an HP dv2500. I've removed the keyboard and blown under it but that hasn't helped. I didn't use compressed air because I just don't have any available, but I suspect it wouldn't help with sticky. So, I'd like to pop they keys off and clean with damp cotton swabs or similar. Is there a proper way to remove the keys? I've found some instructions via Google for non-laptop keyboards, but they don't seem like they'd work for me. Alternate solutions to the problem also welcome, but I've been curious about how to remove the keys for some time for other reasons.

  Read the article

• CPU not working on a specific motherboard

  - by Shaman

  I'm making a computer for someone and I met a weird problem. The CPU that I have doesn't work on this motherboard. The CPU is an Intel Pentium D 925 and the motherboard is an ECS G41T-M6, which in theory should work together. The only thing reused is the power source(400W). When I start the computer, the fans start, and that's it. The BIOS doesn't boot. I tried my own power source (600W Corsair) and nothing. Removed the RAM, no warning. In desperation I tried the last thing, swaped my own CPU with this one (Core2Duo E7200). Lo and behold, it worked. Both. The Core2Duo worked on the ECS with the old power source and the RAM that I used in the first place, and the Pentium D worked on my Gigabyte G31M-ES2L. What I discovered was that the Pentium D didn't receive power on the ECS, because I tried running it without the cooler and it remained at room temperature. On a side note, I also removed the HDDs just in case. So, in conclusion, any ideas? I can't return it, and I can still use it to upgrade another PC, but I would really prefer not to buy another CPU if possible.

  Read the article

• iTunes copy just metadata (song and album ratings, playlists) from iPod

  - by Jared Updike

  I have an iPod touch that I synched with my Windows computer (iTunes 9.0 I think) until my harddrive failed and I lost my entire library. I rebuilt the library (songs) from a year old backup (and various other source for songs) but my playlists and ratings are of course a year old. My iPod itself has most of the playlists and ratings I care most about (favorite songs and albums, rated 4 and 5, for example). I have a catch 22 situation where I feel nervous that I haven't backed up my iPod in around 4 months (when my drive failed) so I'd like to back it up as soon as possible... but if I back it up I have to clear all the songs and playlists and copy them back, which I can't really do since I need to rebuild my playlists on my computer first (using the data only available on my iPod!) The question: is there a better way to READ the information off my iPod than doing it manually, song by song and album by album and playlist by playlist (XML, text dump, database, spreadsheet, anything). In other words, mostly I want the information (metadata like ratings and playlists, not songs) copied off the iPod so I can more quickly get my iTunes library ratings and playlists re-built (manually) so I can finally wipe the music and back up my apps, etc. Then I'd like to copy the music back immediately. The part I'd like to avoid is manually navigating everything on my iPod to read through all the playlists and ratings (50 GB, 6,000+ songs) as I re-enter all of that data by hand. I've done a few dozen albums and it's pretty time consuming having to tap around on the iPod. Reading from a spreadsheet (for example, or XML which I could write a script to get into spreadsheet form) would probably help tremendously, plus then I'd have a backup of that information somewhere besides just my iPod.

  Read the article

• The plugin of munin is always timed out

  - by haoX

  I want to use munin to make a graph of ttyACM0 in Linux, but munin can not create the graph. I found some information in "munin-node.log". it shows that "Service 'temperature' timed out". So I changed timeout to 60 or 120 in /munin/plugin-conf.d/munin-node, but it does not work. It's also timed out. Here is part of my code: if [ "$1" = "config" ]; then echo 'graph_title Temperature of board' echo 'graph_args --base 1000 -l 0' echo 'graph_vlabel temperature(°C)' echo 'graph_category temperature' echo 'graph_scale no' echo 'graph_info This graph shows the temperature of board' for i in 1 2 3 4 5; do case $i in 1) TYPE="Under PCB" ;; 2) TYPE="HDD" ;; 3) TYPE="PHY" ;; 4) TYPE="CPU" ;; 5) TYPE="Ambience" ;; esac name=$(clean_name $TYPE) if [ "$TYPE" != "NA" ]; then echo "temp_$name.label $TYPE"; fi done exit 0 fi for i in 1 2 3 4 5; do case $i in 1) TYPE="Under PCB" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $1}') ;; 2) TYPE="HDD" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $2}') ;; 3) TYPE="PHY" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $3}') ;; 4) TYPE="CPU" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $4}') ;; 5) TYPE="Ambience" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $5}') ;; esac name=$(clean_name $TYPE) if [ "$TYPE" != "NA" ]; then echo "temp_$name.value $VALUE" fi

  Read the article

• I can't get my PC to start up by a normal way.

  - by ssice

  I couldn't write a more accurate title. I am just unable to start the computer by pressing the Power On button. I checked the Power Supply and it seems to give good voltage values in every pin. And this is not a BIOS malfunction because of bad overclocking or anything that may come to your mind. And I will tell you why. It happens that EPS (or any ATX-based) power supply has the ability to be powered-on by the Motherboard by jumping the 13th pin of the 24-pin-ATX-connector to COM/GND. I did it, after pushing the power on button (without any visual response) and, pwhaa! The machine turned on. I was able to read (and even write, if I wanted) BIOS values and then start any OS installed. Machine starts, so it's not any kind of misconfiguration. It seems some hardware related. I am able to power the machine on only if I already pushed the power on button. Though pushing it without jumping the 13th pin to ground for a second does not power the machine. Of course, jumping the pin without pushing the power on button does not tell the motherboard anything, so the computer would not start up either. It's as if the logic that connects the power button with the 13th pin derivation to GND was unable to be activated. What can be the issue? How can I solve it? My configuration is as follows: CPU: AMD Phenom 9850 X4 Black Edition MB: ASUS Formula II AM2 RAM: 2x2GB Corsair Dominator 5-5-5-15 2T @ 1066MHz DDR2 Tested also with only 1 module GPU: 2x XFX nVIDIA GeForce 9600 GT XxX Alpha Dog Edition @ Core: 540Mhz [SLi] Power Supply: Xilence 700W (ATX 12V 2.3 / EPS 12V 2.92 compatible) PS: I know the machine is like 2 years old. I hardly use it now, but my parents do.

  Read the article

• My bios datetime is resetting to 2002, what should I do?

  - by Thierry Lam

  I bought my PC brand new in mid-2006. I'm currently dual booting Win XP 32 bits and Ubuntu Karmic Desktop. Over the last few days, when I boot up my computer, it tells me that my bios time is not set. I now have 2 choices for booting in: Windows first: I can safely get into Windows but the date now shows 2002/01/01 at 00:00. From there, Windows will not sync its time to its servers, I have to manually advance the date myself. I can also advance the date from the bios at startup. Ubuntu first: Since the time date is still set at 2002, the boot system cannot find my linux partition. I can fix that issue by booting to Windows, set the date properly and the linux issue will be fixed automatically. The above two issues can also be fixed if I manually set the bios date/time manually when I turn on my computer. It's annoying to do that every single day since I shut down my PC daily. Am I having an OS issue or a hardware issue? How can I resolve this problem?

  Read the article

• Starting programs from terminal then exiting terminal exits started programs?

  - by sherrellbc

  I really was unsure how to phrase the question title. What I mean is that when I use the terminal to start a program, most of the time when the terminal is closed it also exits the programs started from it. Now this makes sense if we look at it from a hierarchical standpoint of the terminal being the parent process which spawns child processes, and any halt of the parent causes subsequent halting of the children as well. However, I've noticed this to not always be the case. For example, I downloaded Sublime Text Editor and created a symlink in PATH. I can start this program by issuing a sublime command from the terminal, but subsequent closure of the terminal program does nothing to sublime. However, other times either the child process that was started it also closed or it hangs up and causes problems. tl;dr: Is it always the case that programs started from a closed parent process will be closed when the parent is exited? And if so, is there way to start a program from the terminal and then close the terminal without exiting the started process? The whole point here is to start programs from the terminal so I do not overly-populate my desktop with symlinks.

  Read the article

• iTunes Home Sharing only works one way between 2 Windows XP PC's on the same LAN

  - by scunliffe

  Both PC's have the latest iTunes installed. PC (A) can "see" that there is a shared library "B library" but attempts to connect to it return this error message: The shared library "{Username}'s Library" is not responding (-3259) Check that any firewall software running on either the shared computer or this computer has been set to allow communication on port 3689. however the reverse works fine. e.g. PC (B) can "see" shared library "A library" and can access all content. Notes: Both PC's have Home Sharing enabled (turned off/on several times to verify). Both PC's have Windows Firewall turned on, but in the exceptions tab, iTunes is allowed, and Port 3689 is also added as a firewall exception (just in case) Both iTunes accounts have been "authorized" on both PC's Both PC's connect via LAN via D-Link DIR-615 router. In the advanced application rules, iTunes has also been added to allow traffic on port 3689 un-hindered. Is there any other magical setting/configuration option that I should be aware of and set in order to get this to work? I could care less about sharing apps etc. I just want the music sharing to work. Update: Solved! It turns out on PC (B) there were multiple accounts set up. 1 of the accounts had the checkbox checked under the Windows firewall "On" option which states "No exceptions" thus even though it was added to the exception list on the main user account, this other account was blocking access.

  Read the article

• glusterfs mounts get unmounted when 1 of the 2 bricks goes offline

  - by Shiquemano

  I have an odd case where 1 of the 2 replicated glusterfs bricks will go offline and take all of the client mounts down with it. As I understand it, this should not be happening. It should fail over to the brick that is still online, but this hasn't been the case. I suspect that this is due to configuration issue. Here is a description of the system: 2 gluster servers on dedicated hardware (gfs0, gfs1) 8 client servers on vms (client1, client2, client3, ... , client8) Half of the client servers are mounted with gfs0 as the primary, and the other half are pointed at gfs1. Each of the clients are mounted with the following entry in /etc/fstab: /etc/glusterfs/datavol.vol /data glusterfs defaults 0 0 Here is the content of /etc/glusterfs/datavol.vol: volume datavol-client-0 type protocol/client option transport-type tcp option remote-subvolume /data/datavol option remote-host gfs0 end-volume volume datavol-client-1 type protocol/client option transport-type tcp option remote-subvolume /data/datavol option remote-host gfs1 end-volume volume datavol-replicate-0 type cluster/replicate subvolumes datavol-client-0 datavol-client-1 end-volume volume datavol-dht type cluster/distribute subvolumes datavol-replicate-0 end-volume volume datavol-write-behind type performance/write-behind subvolumes datavol-dht end-volume volume datavol-read-ahead type performance/read-ahead subvolumes datavol-write-behind end-volume volume datavol-io-cache type performance/io-cache subvolumes datavol-read-ahead end-volume volume datavol-quick-read type performance/quick-read subvolumes datavol-io-cache end-volume volume datavol-md-cache type performance/md-cache subvolumes datavol-quick-read end-volume volume datavol type debug/io-stats option count-fop-hits on option latency-measurement on subvolumes datavol-md-cache end-volume The config above is the latest attempt at making this behave properly. I have also tried the following entry in /etc/fstab: gfs0:/datavol /data glusterfs defaults,backupvolfile-server=gfs1 0 0 This was the entry for half of the clients, while the other half had: gfs1:/datavol /data glusterfs defaults,backupvolfile-server=gfs0 0 0 The results were exactly the same as the above configuration. Both configs connect everything just fine, they just don't fail over. Any help would be appreciated.

  Read the article

• Is there a standard method for assigning nameservers to servers in a Windows domain?

  - by HopelessN00b

  As the title asks, I'm wondering if there's any standard or "best practice" for how to actually assign nameservers (DNS) and manage the nameserver configuration for client servers on a Windows domain. I'm talking about the setting circled in the below image, in case the language of the question is not clear enough: This is for a large, multi-site environment, where ideally/hopefully all servers point at their site's Domain Controller as the primary DNS server, and a DNS server at a different site as the secondary DNS server. For simplicity's sake, we can say that the secondary server would be the Domain Controller at the home site for everyone, and there are no tertiary DNS servers (even though that's not actually the case). Try as I might, I can't seem to find a GPO setting for this (at least on FL 2003 R2, the Computer Configuration - Administrative Templates - Network - DNS Client - DNS Servers GPO is Supported on: Windows XP Professional only), and I find it rather hard to believe that the "best"/"standard" solution would therefore be either scripting up something to apply the DNS settings per site, or using a DHCP server to push those configurations out to the other servers via the DHCP Scope Options. So, is there a standard way of managing this configuration? (That's hopefully not "a script" or "DHCP Scope Option.)

  Read the article

< Previous Page | 410 411 412 413 414 415 416 417 418 419 420 421  | Next Page >