Search Results

Search found 14013 results on 561 pages for 'remote backup'.

Page 415/561 | < Previous Page | 411 412 413 414 415 416 417 418 419 420 421 422  | Next Page >

• Why do most routers not include local DNS?

  - by user785194

  I need to change my firewall/router, and I'd prefer something with built-in DNS to resolve queries on the local subnets. I've got a mixed Linux/Windows system, often with only one computer turned on, and I frequently have problems resolving local names. I don't want to keep a Linux box permanently on just for DNS, and I'd prefer to have DNS in my router appliance, which is always on. I search Google for this occasionally but never find anything. You always get the obvious answers - it's not possible, put everything in /etc/hosts, NetBIOS, dedicated box, etc. So what am I missing? Why don't "cheap" routers let you do this? I'm pretty sure that Cisco kit does this. Almost all cheap routers will let you do MAC address reservation, to let them assign static IP addresses for DHCP. So why can't they simply do DNS as well for everything on the local subnets, just passing through remote domains to the ISP?

  Read the article

• how to connect virtual box os and local machine

  - by soul

  This question is in connection to this question asked by a user before: http://superuser.com/questions/73470/virtualbox-vdi-file-to-vmware On how to convert vdi to vmdk or vmx using vmware converter. How do I connect the windows xp that is in virtual box to the local computer (windows 7) in a network. Because I got this error while I tried following this instruction: Give the IP address, username and password of the remote machine that you would like to convert and then hit next I got this error in vmware converter: Unable to connect the specified host 10.0.2.15 which is the ip address of the xp machine inside virtual box. It also said that there is a network configuration problem. And when I inputted the ip address from whatismyip.com which should be the same as the ip address on local machine. I didn't get the previous error but I got another one, it said that: insufficient permissions to connect to "ip address" What solution can you suggest for this problem?

  Read the article

• "Unknown user name or bad password" when I launch ADUC

  - by Chris

  When I open up Active Directory Users and Computers from my workstation, I receive an error: Naming information cannot be located because: Logon failure: unknown user name or bad password. Contact your system administrator to verify that your domain is properly configured and is currently online. If I log in to my workstation as somebody else, it works. If I log into a different workstation using my account, it works. All the workstations in question are running Windows Vista (32 and 64 bit) or Windows Server 2008. The domain controller in question is running Windows Small Business Server 2008. Everything else (that I tried) in the Remote Server Administration Tools runs just fine. Any thoughts? Edit: I just tried reinstalling RSAT. No such luck.

  Read the article

• Recommend a Rackspace Cloud Server API Language Binding?

  - by Alex R

  Rackspace publishes only a hard-to-use HTTP and JSON/XML based "API" (they call it an API but it's really a non-standard Web Service without a WSDL). There are dozens of open-source language bindings to choose from. I have tried three of them so far and they're all horrible (incomplete, buggy, and/or undocumented). Can anybody recommend a language binding which is reasonably complete, well documented, and bug-free? I can use Perl, Python, PHP, or Java. My ultimate objective is to create a script/program that will provision a server, launch a process inside it, wait for the process to finish, copy the results to the local server, and destroy the remote server. What's the best choice for that? Thanks

  Read the article

• Problem running application on windows server 2008 instance using amazon ec2 service and WAMP

  - by Siddharth

  I have a basic (small type) windows server 2008 instance running on amazon ec2. I've installed WAMP server on to it, and have also loaded my application. I did this using Remote desktop Connection from my windows machine. I'm able to run my application locally on the instance, however when I try to access it using the public DNS given to it by amazon, from my browser, I'm unable to do so. My instance has a security group that is configured to allow HTTP, HTTPS, RDP, SSH and SMTP requests on different ports. In fact I have the exact same security group as the one used in this blog, http://howto.opml.org/dave/ec2/ I did almost everything same as the blog, except for using a different Amazon Machine Image. This is my first time using amazon ec2, and i can't figure out what I'm doing wrong here

  Read the article

• Can I associate my spare Elastic IP addresses to an Amazon EC2 instance started in an Autoscale group and Monitoring?

  - by undefined

  I want to know if I can reserve a number of Amazon Elastic IP addresses and assign them to instances started by Autoscale. So basically, when a new instance is started because a trigger has been triggered can I also set the API to look for a spare IP address and allocate it to the instance. I need to do this because the started instance will need to communicate to a server outside the cloud and get through a firewall which will only allow remote access from a predefined set of IP addresses. So i think i need to reserve some IPs, add them to my firewall settings then allocate them (automatically) when a new instance is started. Any ideas?

  Read the article

• Get the "source network address" in Event ID 529 audit entries on Windows XP

  - by Make it useful Keep it simple

  In windows server 2003 when an Event 529 (logon failure) occures with a logon type of 10 (remote logon), the source network IP address is recorded in the event log. On a windows XP machine, this (and some other details) are omitted. If a bot is trying a brute force over RDP (some of my XP machines are (and need to be) exposed with a public IP address), i cannot see the originating IP address so i don't know what to block (with a script i run every few minutes). The DC does not log this detail either when the logon attempt is to the client xp machine and the DC is only asked to authenticate the credentials. Any help getting this detail in the log would be appreciated.

  Read the article

• How to choose an open source, Asterisk friendly firewall?

  - by Lucas

  I'm in pain. We are moving to a SIP based VOIP system and for whatever reason, we could not get our hosted Asterisk solution to work with our Sonicwall. Our VOIP provider gave up and is recommending an open source vendor, pfSense. A little background: We have about 30 users in our network. We use a few IPSec VPN connections for remote networks. I would like, but don't need, application layer filtering. We're active internet users, so properly traffic shaping is probably a concern. How can I tell if an open source firewall will handle VOIP setup smoothly with a hosted Asterisk system?

  Read the article

• Can ping/nmap server, nothing else

  - by lowgain

  I was SSHed into our ubuntu LAMP server , and was just doing a svn update, which hung. I disconnected, and since then, I have not been able to SSH in or view any of our websites (neither from my network or through a remote machine). I would have just assumed the server went down, but I can ping the machine and get really quick responses. Using nmap on the box shows all the normal ports open, so I am confused This server is hosted remotely in a datacenter, do I have any remaining options except contacting them for support? Thanks!

  Read the article

• search nfs network volume from mac client

  - by user1440190

  Asked: how does a Mac OSX SL or Lion user search the cluster for a particular file (foo.txt) "From the cluster, you would need to run some form of recursive lookup for the file desired. As an example, using 'find'. RAM-1# find /ifs |grep test.txt /ifs/Elements/avid2test.txt /ifs/Elements/test.txt I would suggest contacting Apple support regarding their recommendation for searching for files on remote file systems from the Mac client itself" OK that's great, but I don't want users using CLI !!! Anyone know a good method (non-CLI)? Spotlight is not an option. BTW cluster is roughly 80TB

  Read the article

• Run a server and local wireless network off my laptop with no internet.

  - by greg

  I'm trying to run a wireless network from my computer so that people in range can connect to the network and hit a website running off my machine. I don't want to enable file sharing or remote access or anything else of that nature. I just want them to be able to connect to the network, type in an IP or domain name in a browser, and be taken to a locally hosted website. No broader internet access needed. Any ideas / links to good tutorials on the subject? Is this something i can achieve with just a wifi card or will need a router?

  Read the article

• Windows 7 is blocking ports

  - by Caleb1994

  I am trying to open port 80 and 3690 for HTTP and svnserve respectively. I have Windows Firewall off, and have tried temporarily disabling Mcafee VirusScan Enterprise, to no avail. According to http://www.yougetsignal.com/tools/open-ports/, both ports 80 and 3690 are still blocked. I can't think of what would be blocking them if Windows Firewall and my antivirus are disabled. Here is the output of netsh firewall show state Firewall status: ------------------------------------------------------------------- Profile = Standard Operational mode = Disable Exception mode = Enable Multicast/broadcast response mode = Enable Notification mode = Enable Group policy version = Windows Firewall Remote admin mode = Disable Ports currently open on all network interfaces: Port Protocol Version Program ------------------------------------------------------------------- 3690 TCP Any (null) 22 TCP Any (null) 80 TCP Any (null) 1900 UDP Any (null) 2869 TCP Any (null) Any help? I'm not sure what each item on the list of enabled/disabled items is, but "Operational Mode" is disabled, so I assume that one refers to me disabling Windows Firewall. I know that since Windows Firewall is off, this output might not be useful, but I figured I'd include it just in case, haha.

  Read the article

• Windows 7 is blocking ports

  - by Caleb1994

  I am trying to open port 80 and 3690 for HTTP and svnserve respectively. I have Windows Firewall off, and have tried temporarily disabling Mcafee VirusScan Enterprise, to no avail. According to http://www.yougetsignal.com/tools/open-ports/, both ports 80 and 3690 are still blocked. I can't think of what would be blocking them if Windows Firewall and my antivirus are disabled. Here is the output of netsh firewall show state Firewall status: ------------------------------------------------------------------- Profile = Standard Operational mode = Disable Exception mode = Enable Multicast/broadcast response mode = Enable Notification mode = Enable Group policy version = Windows Firewall Remote admin mode = Disable Ports currently open on all network interfaces: Port Protocol Version Program ------------------------------------------------------------------- 3690 TCP Any (null) 22 TCP Any (null) 80 TCP Any (null) 1900 UDP Any (null) 2869 TCP Any (null) Any help? I'm not sure what each item on the list of enabled/disabled items is, but "Operational Mode" is disabled, so I assume that one refers to me disabling Windows Firewall. I know that since Windows Firewall is off, this output might not be useful, but I figured I'd include it just in case, haha.

  Read the article

• Request Multiple Maya Floating Server Licenses for extra Satellite clients

  - by Rob

  Hello all: I am currently setting up a 'render farm' for Maya 2008 Unlimited. One Maya workstation license comes with the ability to render on eight satellite nodes. It works perfect, the remote rendering works like a charm. However, we have additional boxes to set up as satellite rendering nodes, and we have extra Maya workstation licenses. Ideally, the workstation can take two licenses and thus render on 16 nodes, but I haven't been able to figure it out, or determine if it is actually possible. It's a big project, where rendering the entire thing is in the scope of weeks, so the speed up would be worth it. Any thoughts?

  Read the article

• Mostly offsite asset management (laptops/smartphones) - what is a good SaaS based solution?

  - by Jack T

  Most of our company assets are offsite. Everyone either works at home or onsite at a customer. Most asset management/audit/remote control software concentrate on company LAN based assets. We don't need an NMS as we use OpenNMS in the internal network. I was thinking of something like Altiris Client Management Suite but since everything is connected to the internet a SaaS based solution sounds like the ways to go. LogMeIn Central looks ok but not that comprehensive. What do you guys use?

  Read the article

• VPN IPsec site 2 site and static routing

  - by Giacomo

  Hello everybody experts! My question is pretty simple, but I can't figure it out because I'm pretty noob with these network stuffs. I have a vpn IPsec site2site between 2 lan with different ip classes, LAN A is class C and LAN B is class A. The vpn presents the LAN A to LAN B with the 10.178.51.64/27 segment. The problem is that when I start the vpn connection I cant Ping any 10.174.0.0/24 address(LAN B remote segment) from my LAN A; I think I need some kind of static route. Could u help me out pls? Thx Regards

  Read the article

• Why has my Mac been running fsck_hfs for two days now?

  - by Nate

  I first noticed that fsck_hfs was running, taking up 50-75% of a CPU, yesterday. It continues to run today. ps shows that it is doing /sbin/fsck_hfs -f -n -x -E /dev/disk3. Only problem: I don’t think I have a /dev/disk3. Why is it running? Will it ever finish? Can I kill it? What is /dev/disk3? Could it be my Time Machine volume, which is not mounted at the moment? System Info: MacBook Pro (2008). It has two disks installed—the internal disk (/dev/disk1) and a PC Card SSD (/dev/disk0, surprisingly). It connects to a remote Time Machine volume attached to an Airport Extreme base station.

  Read the article

• Preferred method for allowing unprivileged UNIX/Linux users to view syslog information

  - by Joshua Hoblitt

  I have some non-privileged "role accounts" that need the ability to view [some of] the local syslogs (eg. /var/log/messages) for debugging purposes. This is explicitly local log data, not remote syslog, logstash, etc. Obviously, there's several ways to address this issue. What I'd like to know is if there is a fairly "standardized" way to solve this issue. Typically, I solve this problem with sudo but either POSIX groups or acls is attractive as it's few chars for the users to type and it removes entries from the sudo log. However, I don't believe I've ever seen that done before. What is your experience? How do large install base sites address this?

  Read the article

• How do I put back different SCSI hard drives into their original RAID arrays across different servers?

  - by Edgar

  I have potentially a big mess in my hands: I received today a box with several hard drives that used to be connected to different servers each one of them using an unknown - at least as of right now- RAID configuration. Regretfully, these are not marked and I'm not sure how to go about putting them back into their original servers. Currently I don't have much more information: I don't know what type of array was being used on each instance and I don't have any specifics about the RAID controller originally used on each one of the servers (currently these servers are at a remote location with no easy access). Is there a way to sort through this mess? What would be the consequences of using trial and error to go about it? This might be a very basic question but I don't have much experience dealing with RAID arrays.

  Read the article

• Monitor status while using VNC

  - by kumar

  So after connecting to a vnc server via vnc viewer to my desktop (remotely), Is it possible to know whether the monitor connected to the CPU is switched ON or not. Simply put, from command prompt how do you know whether monitor is ON/OFF from command line. Here, Basically I am bit worried about privacy as my monitor can be viewed by anyone while accessed remotely. Any solution? Obviously there is a option to switch off the monitor while starting the vnc server at remote side but I am looking for a better solution to control monitor(possible??) remotely. Thanks!

  Read the article

• Interactive mode of PSExec not working for console application

  - by Focker

  I am trying to use PSExec to kick off a console application on a remote computer in an interactive state. When I run something like this: PsExec.exe -s -d -i 1 \\MyServer notepad.exe It launches Notepad just fine. If I then run this: PsExec.exe -s -d -i 1 \\MyServer C:\Temp\MyConsoleApp.exe It launches the command windows but doesn't do anything as far as I can tell. As in, when I run my console application locally, it displays a "heartbeat" every 5 seconds, but when I run it remotely, nothing is displayed in the command window. The .exe does show up as a process in Task Manager. Any ideas?

  Read the article

• Setting WMI permissions remotely on windows server 2003

  - by user41507

  Hello. I am a programmer , I don know the server well. I made a simple program checking the service on the remote server is started or not. by using this(http://msdn.microsoft.com/en-us/library/dwd0y33x(v=VS.90).aspx) but the permission should be set. and I can't find any document via the internet. except one document. http://msdn.microsoft.com/en-us/library/aa393266(VS.85).aspx but the engineer say that 'tell me exactly what I do. there are many DCOM are they any nice document to show him? thanks in advance

  Read the article

• Tool to launch a script driven by modem activity

  - by Will M

  Can anyone suggest a software tool (preferably under Windows XP or later) that would launch an application or script in response to a phone call being received on a landline phone line connected to a data modem on the same PC? or, better, in response to a sequence of touch-tones being played over such a phone line. This would allow, for example, using the telephone to manipulate firewall settings so as to create another layer of security in connection with remote internet access to that computer. I seem to recall seeing tools to do this sort of thing in the days before broadband internet access, when there was more attention to various tips and tricks for the dial-up modem, but a few attempts at Google hasn't turned anything up.

  Read the article

• APF, IPTABLES, Fedora 15 - Not blocking correctly

  - by RichardW11

  I just got a new remote server which came with Fedora 15. I first tried to run APF but it gave me this error "apf(18031): {glob} unable to load iptables module (ip_tables), aborting.". Which I then set SET_MONOKERN="0" to SET_MONOKERN="1" to resolve the problem. However, with my config file showing BLK_P2P_PORTS="1214,2323,4660_4678,6257,6699,6346,6347,6881_6889,6346,7778" The ports show up as closed, instead of being filtered. Any idea why this would be happening? 22/tcp open ssh 80/tcp open http 443/tcp open https 2323/tcp closed 3d-nfsd 4662/tcp closed edonkey 6346/tcp closed gnutella 6699/tcp closed napster 6881/tcp closed bittorrent-tracker 7778/tcp closed interwise

  Read the article

• Error when I try to connect to a SQL Server 2005 from the internet

  - by Manish

  My SQL Server is on a local machine. I want to access it through internet. I created a website through I want to connect local SQL Server 2005. This is the error message: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Thanks for a reply!

  Read the article

< Previous Page | 411 412 413 414 415 416 417 418 419 420 421 422  | Next Page >