Search Results

Search found 14924 results on 597 pages for 'kernel mode'.

Page 417/597 | < Previous Page | 413 414 415 416 417 418 419 420 421 422 423 424  | Next Page >

  • swapping or trashing with vast amounts of unmapped pagecache

    - by Marco
    I'm using kubuntu jaunty (i386 32bit), kernel 2.6.28-13-generic. I've 4Gb of RAM, of which only 3317Mb are seen by the system (I guess because of the 32bit system). I'm seeing that the pagecache utilization is continually growing, up to the point that the system is unusable (after a few days). This happens also when I don't do anything (all user applications closed and the bare minimum of services enabled). If enabled, the system starts to use swap space (using it all in the end). Even if swap is disabled, disk activity becomes continuous, with the system unresponsive. For example, right now the system is working (albeit a tad slow), with only firefox and wing ide running, and I have 2Gb cached with only 45Mb mapped: $ free total used free shared buffers cached Mem: 3346388 3247328 99060 0 8416 2117980 -/+ buffers/cache: 1120932 2225456 Swap: 2144668 519448 1625220 $ cat /proc/meminfo MemTotal: 3346388 kB MemFree: 97128 kB Buffers: 7872 kB Cached: 2120224 kB SwapCached: 413860 kB Active: 2304596 kB Inactive: 865984 kB Active(anon): 2279168 kB Inactive(anon): 830236 kB Active(file): 25428 kB Inactive(file): 35748 kB Unevictable: 32 kB Mlocked: 32 kB HighTotal: 2492940 kB HighFree: 5456 kB LowTotal: 853448 kB LowFree: 91672 kB SwapTotal: 2144668 kB SwapFree: 1625244 kB Dirty: 84 kB Writeback: 0 kB AnonPages: 629304 kB Mapped: 45768 kB Slab: 45600 kB SReclaimable: 21756 kB SUnreclaim: 23844 kB PageTables: 4468 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 3817860 kB Committed_AS: 3735020 kB VmallocTotal: 122880 kB VmallocUsed: 9352 kB VmallocChunk: 66600 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 888832 kB If I try to drop the caches, little happes: # sync ; echo 3 > /proc/sys/vm/drop_caches ; free total used free shared buffers cached Mem: 3346388 3220580 125808 0 3020 2100600 -/+ buffers/cache: 1116960 2229428 Swap: 2144668 519356 1625312 Right now I've vm.swappiness = 5, but I've tried also with 0 and 1 (without noticeable differences). I've also tried vm.vfs_cache_pressure = 50 and 150 (again, no differences). As I said the pagecache eats all memory even with swapping turned off. What is happening? How to avoid this? TIA, Marco

    Read the article

  • How to troubleshoot web server lock-up (Debian Squeeze)

    - by Ryan
    Every once in a while, my web server slows so significantly, it seems locked up. Can't SSH in, no sites being served. It's a VPS that started out as Debian 5 which I upgraded to testing (squeeze). It's a typical LAMP set-up with the sole purpose of running a couple of wordpress sites. One time when it locked up, I got to one of the sites, but it was wordpress complaining it couldn't establish a database connection. So it seemed as if something was really chewing up the CPU and mysqld either timed out, or possibly failed and couldn't restart. But since I couldn't SSH in I feel more inclined to attribute it to CPU. But the only processes running now, aside from OS and kernel stuff: apache mysqld python (for fail2ban) sshd exim4 It has 512M of RAM and 1.5 GB of swap. Every time I check on it, it has plenty of free memory and is using virtually no swap (usually 2-3M). And since I am running fail2ban I don't think I'm getting ddosed. I did find this in my logwatch email this morning (it locked up late last night, when there would have been very little traffic): 6 Time(s): [<ffffffff810a0ebc>] ? oom_kill_process+0x7e/0x23d 6 Time(s): [<ffffffff810a1505>] ? __out_of_memory+0x12a/0x141 6 Time(s): [<ffffffff810a1586>] ? out_of_memory+0x6a/0x94 I didn't find anything else suspicious. It can't be my provider's host because I can SSH in and restart the VM, and everything seems fine. Anybody know which logs I should start poring through to find the core of my problem? Thanks guys.

    Read the article

  • mod_perl loses STDOUT in middle of request

    - by puzzled72
    Hi, I have been having this weird issue where mod_perl seems to lose STDOUT in the middle of the request. So far I have eliminated everything I could think of. You might have seen this bug related to the following errors in error_log : Apache2 IO flush: (103) Apache2::RequestIO::read: (104) Software caused connection abort They are all the same error. It happens when the perl script running under mod_perl loses STDOUT when trying to print the result back to apache. I only notice this error on my servers running the following: (centos5.4) Perl 5.8.8-27 mod_perl 2.0.4-6 httpd 2.2.3-31 kernel-2.6.18-164.15.1 It's not the code This code has been working for months It's not network related The browser gets the error response from apache. It's not time related I get the error 15 or so seconds after I restart httpd It's not idle httpd related I have tried reducing the min/max SpareServers to 1 It's not load related I get the error even if there are only 10 sessions on httpd It's not related to the "fd < PERLIO_MAX_REFCOUNTABLE_FD" perl 5.8.8 bug I recompiled perl-5.8.8 with the patch mentioned here : https://bugzilla.redhat.com/show_bug.cgi?id=559832, same error. It appeared sometime between December 2009 and February 2010 sorry I cannot be more specific Anyone has any idea ? Anything that I have not tested ? Really Puzzled!

    Read the article

  • CloneZilla PXE Boot Without NFS

    - by John
    I am trying to setup CloneZilla to be bootable via PXE without using NFS. I do not have NFS running on our PXE server and would like to keep it that way. However, most of the information that I have found online indicates that you need to setup NFS in order to PXE boot CloneZilla. I believe that I am pretty close in getting it to work, but am not sure where to go next. Listed below are the different PXE menu option configurations that I have used so far. LABEL Clonezilla Live MENU LABEL Clonezilla Live KERNEL utilities/clonezilla/vmlinuz APPEND initrd=utilities/clonezilla/initrd.img boot=live live-config noswap nolocales edd=on nomodeset ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_keymap="" ocs_live_batch="no" o$ I have also tried the following append lines, without success: APPEND initrd=utilities/clonezilla/initrd.img boot=live union=aufs noswap noprompt vga=788 fetch=tftp://10.130.155.23/filesystem.squashfs APPEND initrd=utilities/clonezilla/initrd.img boot=live union=aufs noswap noprompt vga=normal nomodeset nosplash fetch=tftp://10.130.155.23/filesystem.squashfs Each of them have resulted in a no go with the following error: "Unable to find a live file system on the network". It looks like it gets to the point of trying to load the filesystem.squashfs file, hangs, and then throws the error. Any help would be greatly appreciated.

    Read the article

  • Webmin / Virtualmin running php as www-data, is locked out of viewing .htaccess and writing

    - by Kirill
    I've asked this on the virtualmin forums, but haven't had any help from there. Recently, "something" happened and it seems that the apache service has gone a bit weird. What it does: it runs all apache traffic as www-data and sometimes spawns the php5-cgi process as www-data, this is a problem because all the domain users own their directories and default permissions don't let www-data write to these folders (file uploads are dead) or read .htaccess (permalinks are broken in wordpress). I've googled this for about a week straight now, tried pretty much everything I could find and achieved nothing. The only thing that I think might actually be the cause of all this is this page: http:// - i.imgur.com/NYW3x.png (got shut down by the spam filter) So I figured if I set it to "default", this might magically start working again, but all it does is "crash" apache (all websites timeout). I figure it's something to do with the "mpm" module or something, but I can't find anything relevant in the settings to modify for it to work. Can someone please point me in the right direction? System info: Webmin version 1.580 Kernel and CPU Linux 2.6.35.4-rscloud on x86_64 Virtualmin version 3.90.gpl GPL Ubuntu 10.04 LTS (Lucid) A couple screenshots of top http://i.imgur.com/U2DTK.png http://i.imgur.com/sNPKs.png

    Read the article

  • USB To Serial under OpenSuse 11.3

    - by Lars
    I have a LogiLink USB-To-Serial adapter. This has the PL2303 chip inside. When I insert the device: [26064.927083] usb 7-1: new full speed USB device using uhci_hcd and address 9 [26065.076090] usb 7-1: New USB device found, idVendor=067b, idProduct=2303 [26065.076099] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [26065.076105] usb 7-1: Product: USB-Serial Controller [26065.076110] usb 7-1: Manufacturer: Prolific Technology Inc. [26065.079181] pl2303 7-1:1.0: pl2303 converter detected [26065.091296] usb 7-1: pl2303 converter now attached to ttyUSB0 So the device is recognized and the converter is attached to ttyUSB0. When I do screen /dev/ttyUSB0 9600 I get the error: bash: /dev/ttyUSB0: Permission denied So I went looking in the file permissions. ls -l from the /dev folder reports: crw-rw---- 1 root dialout 188, 0 2011-04-26 15:47 ttyUSB0 I added my user lars to the dialout group. When I use the commands groups under lars it shows that I'm in the group. Though I still recieve the permissions denied error, as lars, and as root. I'm trying to connect to a console cable to configure some Cisco switches. My OS is OpenSuse 11.3 x86_64 with kernel version 2.6.34.7-0.7-desktop.

    Read the article

  • APC + FPM memory fragmentation without a reason

    - by palmic
    My setup @ debian 6-testing is: nginx 1.1.8 + php 5.3.8 + php-fpm + APC 3.1.9 Because i use automatic deployment with apc_clear_cache() after deploy, my target is to set up APC to cache all my project (up to 612 php files smaller than 1MB) without files changes checking. My confs: FPM: pm.max_children = 25 pm.start_servers = 4 pm.min_spare_servers = 2 pm.max_spare_servers = 10 pm.max_requests = 500 APC: pc.enabled="1" apc.shm_segments = 1 apc.shm_size="64M" apc.num_files_hint = 640 apc.user_entries_hint = 0 apc.ttl="7200" apc.user_ttl="7200" apc.gc_ttl="600" apc.cache_by_default="1" apc.filters = "apc\.php$,apc_clear.php$" apc.canonicalize="0" apc.slam_defense="1" apc.localcache="1" apc.localcache.size="512M" apc.mmap_file_mask="/tmp/apc-php5.XXXXXX" apc.enable_cli="0" apc.max_file_size = 2M apc.write_lock="1" apc.localcache = 1 apc.localcache.size = 512 apc.report_autofilter="0" apc.include_once_override="0" apc.coredump_unmap="0" apc.stat="0" apc.stat_ctime="0" The problem is i have my APC memory fragmented into 5 pieces at 14,5MB loaded into memory which capacity is 64M. My system memory is 640MB, used about 270MB at most. The http responses lasts about 300ms - 5s. When i switch on apc.stat="1", the responses are about 50ms - 80ms which is quite good, but i cannot understand why is apc.stat="0" so much whorse. The APC diagnostic tool shows "1 Segment(s) with 64.0 MBytes (mmap memory, pthread mutex Locks locking)" in general cache information window so i hope i am right that it's mmap setup which allows tweaking APC shm onto upper values than shows system limit in /proc/sys/kernel/shmmax (my shows 33MB).

    Read the article

  • ICMP Redirect Theory VS. Application

    - by joeqwerty
    I'm trying to watch ICMP redirects in a lab using Cisco Packet Tracer (version 5.3.2) and I'm not seeing them, which leads me to believe that either my lab configuration isn't correct or my understanding of ICMP redirects isn't correct or that Packet Tracer doesn't support/use ICMP redirects. Here's what I believe to be true regarding ICMP redirects: Routers send ICMP redirects when all of these conditions are met: The interface on which the packet comes into the router is the same interface on which the packet gets routed out. The subnet or network of the source IP address is on the same subnet or network of the next-hop IP address of the routed packet. The datagram is not source-routed. The router kernel is configured to send redirects. I have the lab set up in Cisco Packet Tracer as displayed in the image and would expect to see an ICMP redirect from Router1 when pinging from PC1 to PC3. I'm not seeing the ICMP redirect and it looks like Router1 is actually routing all of the packets via Router2. I have IP ICMP debugging enabled on Router1 (and Router2) and I'm not seeing any ICMP redirect activity in either console. I'm also not seeing a route to the PC3 network in the routing table on PC1, which I think confirms that the ICMP redirect is not occurring. I'm using only static routing on Routers 1 and 2. Is my understanding of ICMP redirects incorrect, or is there a problem with my lab configuration or does Packet Tracer not support/use ICMP redirects?

    Read the article

  • Is anyone using KVM in production?

    - by Andy Shellam
    I've been trying to set up a pair of servers utilising KVM on Ubuntu 9.10 to host 8 virtual machines between them and ended up with various issues from the VMs freezing, to not powering on. I had one virtual server set up and running and was setting up a second, when any operation involving OpenSSL would cause the VM to lock up in a weird way - all network traffic would cease, it wouldn't process logins on the console, but it wasn't taking any CPU time off the host. The first virtual server was identical and worked perfectly. Another VM I tried to setup had installed Ubuntu fine then refused to reboot, throwing kernel exceptions to do with XFS. I've now installed Citrix XenServer 5.5 on both hosts, and am now setting up my third VM with absolutely no issues. I also had the same experience when I tried VMware, but I preferred Xen as it appears to give more features on the free license. My question is am I just unlucky with KVM, or is KVM as unstable as it appears? Are you using, or planning on using, KVM in production, and how successful have you been?

    Read the article

  • Ext3 fs: Block bitmap for group 1 not in group (block 0). is fs dead?

    - by ip
    Hi, My company has a server with one big partition with Mysql database and php files. Now this partition seems to be corrupted, as reported from kernel messages when I tried to mount it manually: [329862.817837] EXT3-fs error (device loop1): ext3_check_descriptors: Block bitmap for group 1 not in group (block 0)! [329862.817846] EXT3-fs: group descriptors corrupted! I've tried to recovery it running tools from a PLD livecd. These are the tools I have tested: - e2retrieve - testdisk - photorec - dd_rescue/dd_rhelp - ddrescue - fsck.ext2 - e2salvage without any success. dumpe2fs 1.41.3 (12-Oct-2008) Filesystem volume name: /dev/sda3 Last mounted on: <not available> Filesystem UUID: dd51610b-6de0-4392-a6f3-67160dbc0343 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal filetype sparse_super Default mount options: (none) Filesystem state: not clean with errors Errors behavior: Continue Filesystem OS type: Linux Inode count: 9502720 Block count: 18987570 Reserved block count: 949378 Free blocks: 11555345 Free inodes: 11858398 First block: 0 Block size: 4096 Fragment size: 4096 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 16384 Inode blocks per group: 512 Last mount time: Wed Mar 24 09:31:03 2010 Last write time: Mon Apr 12 11:46:32 2010 Mount count: 10 Maximum mount count: 30 Last checked: Thu Jan 1 01:00:00 1970 Check interval: 0 (<none>) Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 128 Journal inode: 8 Journal backup: inode blocks dumpe2fs: A block group is missing an inode table while reading journal inode There's any other tools I have to test before considering these disk definitely unrecoverable? Many thanks, ip

    Read the article

  • Understanding Linux SCSI queue depths

    - by Troels Arvin
    I'm experimenting with the effects of different SCSI queue depth values on a Dell server running CentOS Linux 5.4 (x86_64). The server has two QLogic QLE2560 FC HBAs connected via multipathing to a storage system. The storage system has allocated two LUNs to the server, each connected through four paths in an active-active-active-active round-robin configuration. All in all, the two LUNs exist as eight /dev/sdX devices, represented by two devices in /dev/mpath. I currently adjust the queue depth values in /etc/modprobe.conf and check the result (after rebooting) by looking in the seventh column of /proc/scsi/sg/devices. Two questions related to that: Is there a way to adjust queue depths without rebooting or unloading the qla2xxx kernel module? E.g., can I echo a new queue depth value into some /proc or /sys-like file to update the queue depth? If I set the queue depth to 128, is that 128 in total for all devices handled by the qla2xxx module?, or 128 for each HBA? (256 in total), or 128 for each of the eight /dev/sdX devices (1024 in toal)?, or 128 for each of the two /dev/mpath/... devices (256 in total)? This is important for me to know so that my server doesn't flood the storage system, affecting other servers connected to it.

    Read the article

  • X11 performance problem after upgrading from Centos3 to Centos5 with an ATI Rage XL

    - by Marcelo Santos
    After upgrading a computer from Centos3 to Centos5 an application that does a lot of scrolling took a very high performance hit. top tells me that X is using a lot of CPU and that was not happening before. The machine has an ATI Rage XL with 8MB and X is using the ati driver as there is no proprietary ATI driver for this board on linux. The xorg.conf: Section "Device" Identifier "Videocard0" Driver "ati" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection A similar machine that still has Centos3 installed is able to start DRI on the X server while this one is not, this is the Xorg.0.log for the Centos5 machine: drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed [drm] failed to load kernel module "mach64" (II) ATI(0): [drm] drmOpen failed (EE) ATI(0): [dri] DRIScreenInit Failed (II) ATI(0): Largest offscreen areas (with overlaps): (II) ATI(0): 1024 x 1279 rectangle at 0,768 (II) ATI(0): 768 x 1280 rectangle at 0,768 (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots (==) ATI(0): Backing store disabled (==) ATI(0): Silken mouse enabled (II) ATI(0): Direct rendering disabled (==) RandR enabled I also tried using EXA instead of XAA and setting: Option "AccelMethod" "XAA" Option "XAANoOffscreenPixmaps" "true" uname -a Linux sir5.erg.inpe.br 2.6.18-128.7.1.el5 #1 SMP Mon Aug 24 08:20:55 EDT 2009 i686 i686 i386 GNU/Linux rpm -qa | grep xorg-x11-server xorg-x11-server-utils-7.1-4.fc6 xorg-x11-server-sdk-1.1.1-48.52.el5 xorg-x11-server-Xvfb-1.1.1-48.52.el5 xorg-x11-server-Xnest-1.1.1-48.52.el5 xorg-x11-server-Xorg-1.1.1-48.52.el5 The drmOpenDevice error continues when using the suggested Option "AIGLX" "true".

    Read the article

  • How to run some commands after booting from ArchLinux disk? Or how to change some settings in .iso before booting?

    - by Alexander Ovchinnikov
    How to install Arch Linux with traditional installer with only ssh-access to server? There is nice guide: https://wiki.archlinux.org/index.php/Install_from_SSH I try test this on my home vps: Start VPS with any linux bootable cd and login to remote server (vps) wget http://mirrors.kernel.org/archlinux/iso/latest/archlinux-2010.05-netinstall-x86_64.iso dd if=archlinux-2010.05-netinstall-x86_64.iso of=/dev/sda reboot ... I see, it works but without ssh connection... I need make script, which will send this commands after reboot: aif -p partial-configure-network (and write some information about my server ip etc.) /etc/rc.d/sshd start (need to start sshd) echo "sshd: ALL" /etc/hosts.allow (to allow me login to server, by default deny all) passwd (by default its empty, can't login via ssh with empty password) Can I edit .iso or may be /dev/sda? May be I need write script, which will start after system boot and do this things or may be I can set this settings by default and system will start with correct settings (i think its possible at least in 2. and 3.). Thank you!

    Read the article

  • SATA drives or chipset throwing DRDY ERR and ICRC ABRT

    - by Matt
    I have an SD-VIA-1A2S PCI card with 2 sata ports (and one ATA-133 that isn't used). Two new Western Digital Caviar Green drives (WD10EARS 1TB) throw repeated errors in kern.log (removed date/time/host info for brevity): [ 7.376475] ata2.00: exception Emask 0x12 SAct 0x0 SErr 0x1000500 action 0x6 [ 7.376480] ata2.00: BMDMA stat 0x5 [ 7.376483] ata2: SError: { UnrecovData Proto TrStaTrns } [ 7.376489] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 7.376490] res 51/84:2f:20:00:00/00:00:00:00:00/e0 Emask 0x12 (ATA bus error) [ 7.376493] ata2.00: status: { DRDY ERR } [ 7.376495] ata2.00: error: { ICRC ABRT } [ 7.376504] ata2: hard resetting link I'm using Ubuntu 9.04 - 2.6.28-18-generic, though I have tried live cds of Ubuntu 9.10, Fedora 12 and OpenSUSE 11.2 - all running various 2.6.31 kernels - and all received the same error. Based on testing these drives and this card in two other machines and combos of connecting the drives directly to the motherboard or the add-in card, I'm relatively convinced that it's the VIA chipset that is the problem. Another computer that also has an onboard VIA SATA chipset (like the add-in card) produces the same errors when the drives are directly on that motherboard. I have been able to verify that the drives are perfectly good, and I tried everything I can think of in terms of swapping cables, psu isn't overloaded, etc. The error happens on boot once or twice, after using fdisk on the drive once or twice, and constantly when attempting to sync a new mdadm raid 1 array created on the two drives. Any thoughts on where to go from here - driver/kernel wise? I'm completely open to buying a new PCI add-in card if someone can recommend one with 2 internal sata ports that works well in Debian/Ubuntu. Thanks!

    Read the article

  • Crash dump analysis

    - by Ryan Ries
    I hope this isn't a stupid question, and if it is, then I want to at least get it over with so I don't feel so dumb in the future. Here we are, loading up a Windows crash dump with Windbg. Here are the first few lines of the debugger output: 0: kd> .dumpdebug ----- 64 bit Kernel Summary Dump Analysis DUMP_HEADER64: MajorVersion 0000000f MinorVersion 00001db1 ... The MinorVersion I mostly understand. It's hexadecimal and it translates to 7601 in decimal. Windows admins would already be able to tell from that that this must be either a Win7 x64 machine or a 2k8 R2 machine with SP1. But isn't 7601 the build number? It's supposed to be Major.Minor.Build/Revision... right? Also I don't understand the MajorVersion. It should be 6. This version of Windows is 6. But isn't 0000000f in hexadecimal 15 in decimal? The full version string of this version of Windows, when you launch the Command Prompt for instance, is 6.1.7601. If 7601 is the MinorVersion, then what is 1 and what is 6? And why does the crash dump say 0F?

    Read the article

  • Boot ISO image from GRUB4DOS on EFI machines

    - by Vladimir Tikhomirov
    I failed with loading ISO image (non-distro) from GRUB2 from USB stick, but found the way how I can boot the GRUB4DOS and then load the image from there. However, it doesn't work all the time and the questions is WHY it doesn't? Environment and loading process: We need to have EFI machine, USB stick, booting ISO, GRUB2 and GRUB4DOS. Last 3 on USB stick. Boot: USB - EFI loader - GRUB2 - GRUB4DOS - ISO image Configuration files To boot GRUB4DOS I use this from grub.cfg: menuentry "image.iso" { linux /syslinux/grub.exe --config-file="/menu.lst" } My menu.lst is here: timeout 20 default 0 title image.iso find --set-root --ignore-floppies --ignore-cd //image.iso map --heads=0 --sectors-per-track=0 //image.iso (hd32) map --hook chainloader (hd32) This works perfectly with Legacy machines. However, when I come to GRUB4DOS, I don't see the menu with image.iso, I see only GRUB command line. That means that my menu.lst didn't load. Why is it like this? Background and ideas I have an idea that GRUB4DOS doesn't recognize my USB stick as a device. I tried the command find and got (hd0,0), (hd0,1), (hd0,2), (rd). When I tried to set root to any of these devices I don't see fat file system, how it was with Legacy machines. The root device is (hd0,0), which has ntfs file system which should be partition with Windows. EFI machines support only GRUB2, so I can't boot GRUB4DOS straight away. Please, don't suggest anything like this, because my image doesn't have kernel. You can imagine that you load HDAT2 or Hiren's boot cd, for example. menuentry "Blancco Blancco5.iso" { set isofile="/image.iso" loopback loop $isofile set root=(loop) linux /isolinux/vmlinuz isofile=$isofile splash quiet initrd /isolinux/initrd }

    Read the article

  • DNAT to 127.0.0.1 with iptables / Destination access control for transparent SOCKS proxy

    - by cdauth
    I have a server running on my local network that acts as a router for the computers in my network. I want to achieve now that outgoing TCP requests to certain IP addresses are tunnelled through an SSH connection, without giving the people from my network the possibility to use that SSH tunnel to connect to arbitrary hosts. The approach I had in mind until now was to have an instance of redsocks listening on localhost and to redirect all outgoing requests to the IP addresses I want to divert to that redsocks instance. I added the following iptables rule: iptables -t nat -A PREROUTING -p tcp -d 1.2.3.4 -j DNAT --to-destination 127.0.0.1:12345 Apparently, the Linux kernel considers packets coming from a non-127.0.0.0/8 address to an 127.0.0.0/8 address as “Martian packets” and drops them. What worked, though, was to have redsocks listen on eth0 instead of lo and then have iptables DNAT the packets to the eth0 address instead (or using a REDIRECT rule). The problem about this is that then every computer on my network can use the redsocks instance to connect to every host on the internet, but I want to limit its usage to a certain set of IP addresses only. Is there any way to make iptables DNAT packets to 127.0.0.1? Otherwise, does anyone have an idea how I could achieve my goal without opening up the tunnel to everyone? Update: I have also tried to change the source of the packets, without any success: iptables -t nat -A POSTROUTING -p tcp -s 192.168.1.0/24 -d 1.2.3.4 -j SNAT --to-source 127.0.0.1 iptables -t nat -A POSTROUTING -p tcp -s 192.168.1.0/24 -d 127.0.0.1 -j SNAT --to-source 127.0.0.1

    Read the article

  • How can I make my PCI-E graphics card visible to Ubuntu when the motherboard has integrated graphics

    - by Norman Ramsey
    I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first: Integrated graphics PCI graphics PCI-Express graphics (PEG) I set the BIOS on PEG, but I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.) I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one. Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says Current usage: Unknown There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset! Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power. It gets all its power from the PCI-E slot; there is no external power connector. The BIOS is an AMI Award BIOS. My question: how can I make the PCI Express graphics card visible to Ubuntu?

    Read the article

  • Ingress filtering in Linux traffic control: Redirect traffic to IFB device

    - by Dani Camps
    I have an openwrt router and I want to shape incoming traffic in order to classify all the traffic addressed to a certain IP address in my home network as low priority. For that purpose I want to redirect all traffic incoming to the eth1 interface, the one connected to the DSL modem, to an IFB device where I will do the shaping. These are the details of my system: Linux OpenWrt 2.6.32.27 #7 Fri Jul 15 02:43:34 CEST 2011 mips GNU/Linux Here is the script I am using where the last instruction is failing: # Variable definition ETH=eth1 IFB=ifb1 IP_LP="192.168.1.22/32" DL_RATE="900kbps" HP_RATE="890kbps" LP_RATE="10kbps" TC="tc" # Configuring the ifbX interface insmod ifb insmod sch_htb insmod sch_ingress ifconfig $IFB up # Adding the HTB scheduler to the ingress interface $TC qdisc add dev $IFB root handle 1: htb default 11 # Set the maximum bandwidth that each priority class can get, and the maximum borrowing they can do $TC class add dev $IFB parent 1:1 classid 1:10 htb rate $LP_RATE ceil $DL_RATE $TC class add dev $IFB parent 1:1 classid 1:11 htb rate $HP_RATE ceil $DL_RATE # Redirect all ingress traffic arriving at $ETH to $IFB $TC qdisc del dev $ETH ingress 2>/dev/null $TC qdisc add dev $ETH ingress $TC filter add dev $ETH parent ffff: protocol ip prio 1 u32 \ match u32 0 0 flowid 1:1 \ action mirred egress redirect dev $IFB The last instruction fails with: Action 4 device ifb1 ifindex 9 RTNETLINK answers: No such file or directory We have an error talking to the kernel Does anyone know what am I doing wrong ? Best Regards Daniel

    Read the article

  • IPMI not fucntioning with Network Bonding

    - by muhammed sameer
    Hey, I am having problems with running IPMI on my servers that have network bonding enabled. Platform: CentOS release 5.3 (Final) Kernel: 2.6.18-92.el5 64bit Dell PowerEdge 1950 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet I have bonded the interface eth0 and eth1 as active passive, with eth0 as the active interface, below is conf description from /proc Bonding Mode: fault-tolerance (active-backup) Primary Slave: eth0 Currently Active Slave: eth0 MII Status: up MII Polling Interval (ms): 30 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:22:19:56:b9:cd Slave Interface: eth1 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:22:19:56:b9:cf My IPMI device is as follows IPMI Device Information Interface Type: KCS (Keyboard Control Style) Specification Version: 2.0 I2C Slave Address: 0x10 NV Storage Device: Not Present Base Address: 0x0000000000000CA8 (I/O) Register Spacing: 32-bit Boundaries I Have used openIPMI as well as freeipmi both to control the chassis via the IPMI card, but on servers which have bonding enabled, the command times out, below is the full run of the command with debug info. ipmi_lan_send_cmd:opened=[0], open=[4482848] IPMI LAN host 70.87.28.115 port 623 Sending IPMI/RMCP presence ping packet ipmi_lan_send_cmd:opened=[1], open=[4482848] No response from remote controller Get Auth Capabilities command failed ipmi_lan_send_cmd:opened=[1], open=[4482848] No response from remote controller Get Auth Capabilities command failed Error: Unable to establish LAN session Failed to open LAN interface Unable to get Chassis Power Status On the other hand I configured IPMI on a box with the same specs as mentioned above without bonding and IPMI works perfectly. Has anyone faced this problem with IPMI + Bonding ? I would be thankful is someone helps circumvent this issue. Muhammed Sameer

    Read the article

  • Ubuntu Hardy : Testing for environment variables in udev rules doesn't seem to work

    - by Fred
    I have a Ubuntu 8.04 LTS (server edition), and I need to write a udev rule for it to act upon plugging a USB thumb drive. However, I need a different action depending on the filesystem of the drive. I know I can use the ID_FS_TYPE environment variable to check for the filesystem on the drive. Following instructions found here, I try a dummy udev rule as such : KERNEL!="sd[a-z][0-9]", GOTO="my_udev_rule_end" ACTION=="add", RUN+="/usr/bin/touch /tmp/test_udev_%E{ID_FS_TYPE}" ACTION=="add", ENV{ID_FS_TYPE}=="vfat", RUN+="/usr/bin/touch /tmp/test_udev_it_works" LABEL="my_udev_rule_end" However, when I plug in a thumb drive with a vfat filesystem (which should trigger both rules), I end up with a file called /tmp/test_udev_vfat, meaning the first rule was triggered successfully, and that the ID_FS_TYPE environment variable is "vfat", but I don't have the other file, meaning that although I know the ID_FS_TYPE env variable is "vfat", I can't seem to check against it for a match. I tried googling the thing, but pretty much every result seems to assume ENV{ID_FS_TYPE}=="vfat" works. I also tested the exact same udev rule on Ubuntu 10.04 LTS server, and I have the same result. I'm probably missing something very simple, but I just don't get it. Does anyone see what is wrong with my udev rule that would prevent it from matching on ENV{ID_FS_TYPE}? Thanks.

    Read the article

  • Ubuntu NBR karmic boot freezes at fsck from util-linux-ng 2.16

    - by BlueBill
    Hi all, I have a netbook (emachine e250 - equivalent to an acer aspire one) and I have Ubunutu NBR 9.10 installed on it. Every other cold boot freezes at the following error message: "fsck from util-linux-ng 2.16" There is no disk activity, no activity what so ever. I have left the machine sit for over an hour and nothing. It takes a couple of hard resets to be able to boot properly. Once it boots everything works great (wireless, suspend/resume, etc.)! I have spent the last couple of weeks researching the problem and the only thing that seems to work is setting nolapic in the boot string in grub - it boots every time. Unfortunately, nolapic disables the second core and causes problems with suspend resume. At first I thought it was an fsck problem with the first partition on the hard disk as it is a hidden ntfs partition containing the windows xp recover information. So in /etc/fstab I set the partition so that it would be ignored by fsck. This didn't seem to do anything. I have these partitions: /dev/sda1 - an ntfs recovery partition /dev/sda2 - /boot /dev/sda3 - swap /dev/sda5 - / /dev/sda6 - /home I am running kernel version 2.6.31-19-generic and have all the patches (as indicated by update manager). I also have no splash screen so I can see the boot progress. I have only been using NBR since January, I have been using Ubuntu on my desktop since last June (2009-06). What logs should I be looking at? Is there a log for failed boots? Thanks, Troy

    Read the article

  • Windows 7 BSOD with Service Exception Error and Randomly Reboots

    - by Jason Shultz
    I've got a windows 7 laptop that BSOD with a Service Exception Error when I connect to a wireless network. It also does it when it's just sitting still doing nothing. I ran bluescreenview and here are the last four BSOD's from today: ================================================== Dump File : 051210-18642-01.dmp Crash Time : 5/12/2010 8:36:14 AM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`06fda160 Parameter 4 : 00000000`00000000 Caused By Driver : Ntfs.sys Caused By Address : Ntfs.sys+7f030 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-18642-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== ================================================== Dump File : 051210-16551-01.dmp Crash Time : 5/12/2010 8:41:04 AM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`06f40160 Parameter 4 : 00000000`00000000 Caused By Driver : ntoskrnl.exe Caused By Address : ntoskrnl.exe+70600 File Description : NT Kernel & System Product Name : Microsoft® Windows® Operating System Company : Microsoft Corporation File Version : 6.1.7600.16539 (win7_gdr.100226-1909) Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-16551-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== ================================================== Dump File : 051210-17269-01.dmp Crash Time : 5/12/2010 8:45:51 AM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`07db1160 Parameter 4 : 00000000`00000000 Caused By Driver : Ntfs.sys Caused By Address : Ntfs.sys+7f030 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-17269-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== ================================================== Dump File : 051210-19453-01.dmp Crash Time : 5/12/2010 5:46:25 PM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`02625160 Parameter 4 : 00000000`00000000 Caused By Driver : win32k.sys Caused By Address : win32k.sys+2d4201 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-19453-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ==================================================  

    Read the article

  • Linux Distro for Beginners

    - by XLR3204S
    Well... I know that's the question arising all over the Internet, but I couldn't find an answer to suit me after googling for quite some time. I'd like to get a Linux distribution, and start learning using the CLI. I'm looking for a distribution already having GNOME installed, as I'll be using Linux-Command.org as my learning resource, and I'm not very familiar with CLI-based web browsers. I'd mainly like to get to know my way around a UNIX-based system, and then I think I'd like to pick up a CLI-only distribution, and start doing more complex stuff. I've tried Ubuntu, Fedora Core, OpenSolaris and FreeBSD (the last two aren't linux distros, I know). Ubuntu and FC are fine, they do come with Firefox, but I'm not really sure they're meant for learning purposes. OpenSolaris was OK as well, but I haven't got to play with it enough. FreeBSD 7.2 did not want to install itself on my 13" MacBook Pro, it generated a kernel panic everytime while copying the files to the disk. So to sum this up, I'm trying to learn Linux, and I'm willing to invest time into this (that is, not giving up when the first problems arise). I also have intermediate knowledge of C++, if it helps, and I'm also using the CLI-vim to write small C++ CLI-based programs, so text editing should be any problem. And... speaking of Macs, how am I going to be limited if I try to learn how to use UNIX-based systems using the OS X Terminal? It uses bash 3.2, isn't this the same shell as the one found on most of the Linux machines? How does the fact that OS X is based on FreeBSD 4.4, if I'm not mistaking, affect this? Thanks in advance, and hopefully, I'll have a starting point ASAP.

    Read the article

  • Can't start Bind9 on Ubuntu 10.04 + Plesk 10.1 - "named: no process found"

    - by bradley.ayers
    I've installed a fresh version of Ubuntu 10.04 64bit, I didn't install bind when choosing what packages should be installed in the Ubuntu installer. I downloaded the auto installer for Plesk 10.1 and installed it successfully. When I logged into the Plesk control panel and tried to change the password, it failed because it couldn't restart bind. I SSH'd into the box and tried a sudo /etc/init.d/bind9 restart and get the following: brad@ws01:/root# sudo /etc/init.d/bind9 restart * Stopping domain name service... bind9 WARNING: key file (/etc/bind/rndc.key) exists, but using default configuration file (/etc/bind/rndc.conf) rndc: connect failed: 127.0.0.1#953: connection refused named: no process found [ OK ] * Starting domain name service... bind9 [fail] Looking at tail /var/log/messages reveals a whole bunch of: Feb 23 16:08:21 ws01 kernel: [ 3840.065851] type=1503 audit(1298441301.831:31): operation="open" pid=5565 parent=5563 profile="/usr/sbin/named" requested_mask="::r" denied_mask="::r" fsuid=108 ouid=0 name="/var/named/run-root/etc/named.conf" Edit: After following ooshro's advice, bind runs, however I still get the named: no process found error: brad@ws01:/etc/apparmor.d$ sudo /etc/init.d/bind9 restart * Stopping domain name service... bind9 WARNING: key file (/etc/bind/rndc.key) exists, but using default configuration file (/etc/bind/rndc.conf) named: no process found [ OK ] * Starting domain name service... bind9 [ OK ]

    Read the article

< Previous Page | 413 414 415 416 417 418 419 420 421 422 423 424  | Next Page >