Search Results

Search found 22191 results on 888 pages for 'internet sharing'.

Page 419/888 | < Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >

• Use two networks at the same time?

  - by Christopher

  I want to use Ubuntu 10.10 Server in a classroom, a computer lab whose bandwidth is provided by a local cable ISP. That's no problem, though the school network has an IP printer that I want to use. I cannot reach the printer through the cable Internet. But, I have two network cards. How is it possible to use both networks at once? eth0 (static 192.168.1.254) is plugged into a four-port router, 192.168.1.1. On the public side of the four-port router is Internet provided by the cable company. I also have the classroom workstations plugged into a switch. The switch is plugged into the four-port router. The whole classroom is wired into the cable Internet. The other NIC, eth1, could it be plugged into an Ethernet jack in the wall? It uses the school network, and I might receive by DHCP an IP address like 10.140.10.100, with the printer on maybe 10.120.50.10. I was thinking about installing the printer on the server so that it could be shared with the workstations. But how does this work? Can I just plug eth1 into the school network and access both LANs? Thanks for any insight

  Read the article

• NAT rules betweek 2 network interfaces (with iptables)

  - by Simone Falcini

  this is the current network that I have: UBUNTU: eth0: ip: 212.83.10.10 bcast: 212.83.10.10 netmask 255.255.255.255 gateway 62.x.x.x eth1: ip: 192.168.1.1 bcast: 192.168.1.255 netmask: 255.255.255.0 gateway ? CENTOS: eth0: ip: 192.168.1.2 bcast: 192.168.1.255 netmask 255.255.255.0 gateway 192.168.1.1 I basically want this: Make specific NAT rules from the internet to specific internal servers depending on the port: Connections incoming to port 80 must be redirected to 192.168.1.2:80 Connections incoming to port 3306 must be redirected to 192.168.1.3:3306 and so on... I also need one NAT rule to allow the servers in the subnet 192.168.1.x to browse the internet. I need to route the requests on eth0 to eth1 to be able to exit to internet. Can I do this on the UBUNTU machine with iptables? Thanks!

  Read the article

• if an outdated, vulnerable but clean Windows machine is connected to network behind router, can it be detected and attacked?

  - by EndangeringSpecies

  suppose the machine is clean of all malware but not in any sense updated, patched, secured etc. Suppose I connect it to the internet from behind wireless router with the intent of using it only on a few trusted sites and only there. Or, for the sake of argument, maybe I wouldn't do any browsing at all, just let it sit there connected to the network. This is all happening in a residential situation with cable internet. In this situation can a remote attacker somehow detect the fact that the machine is connected to the internet and try connecting to do an exploit?

  Read the article

• Wired connection problem through router

  - by tommypincha

  I'm having trouble to connect my Ubuntu 11.10 to internet through ethernet. I installed a router to get Wi-Fi and now (by a wired connection) I can't have internet with ubuntu (but I can with Windows 7). I see several attempts per minute of the network-manager to get a connection, but after a minute it stops trying. Here are a couple of outputs from key files: cat /etc/network/interfaces auto lo iface lo inet loopback and ifconfig -a eth0 Link encap:Ethernet HWaddr 00:16:76:e4:a6:e8 inet6 addr: fe80::216:76ff:fee4:a6e8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:117 dropped:0 overruns:0 frame:117 TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:12221 (12.2 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:582 errors:0 dropped:0 overruns:0 frame:0 TX packets:582 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:46024 (46.0 KB) TX bytes:46024 (46.0 KB) I tried reconnecting the modem and the router and reconnecting the ethernet cable but nothing... I tried other solutions from other posts (this one has a similar issue Wired connection not working) but again nothing. My IP is dynamic. A couple of things I see and did: I see no inet addr, only inet6. I ignored ipv6 from the internet connections, and restarted the network-manager service and nothing. A difference with the post I mentioned is the RX packets with errors I have, is this a clue of the problem? Any help would be appreciated, Thanks!

  Read the article

• iCal4j ics file not importing to Outlook 2010

  - by user1770475

  I'm having trouble importing an ics file via the 'internet calendars' option in Outlook. The file is produced, I believe, by a Java applet. When I open the ics file directly within Outlook 2010 it works fine, i.e. click on the link and open the downloaded file with Outlook. I've also validated it online with the validator mentioned in some Stack Overflow posts. However when I subscribe to the link via internet calendars I get the following error: The file "calendar" is not a valid Internet Calendar file I haven't been able to work out what's going wrong here and the error message isn't particularly helpful. Does anyone have any ideas why this isn't working?

  Read the article

• How to connect Android phone to a Wifi network using PPPoE?

  - by Slavo

  I have an ISP at home, which provides me with a PPPoE connection. My router supports that and I've configured it to autoconnect periodically, so I don't have to type my username and password each time. When I connect to the Wireless router from the PC, I have internet and everything works fine. However, when I do so using my Android phone, there's no internet connection on the phone. It connects to the router, but I cannot open any web page. How can I enable internet access from such an ISP on my phone? Is it something in the router setup? The router is Linksys WRT54GL.

  Read the article

• Black screen with thinkpad edge e525, AMD radeon HD before and after installation, plymouth?

  - by carolien

  I have a new thinkpad edge e525 (which should work) and wanted to try ubuntu (first linux experience). With the ubuntu desktop-cd I had a blackscreen before installation, I could fix that with nomodeset. After the installation, when rebooting I got the black screen again. First I see some ubuntu colour with a green busted stripe. I have the same problem with the live boot, also tried mint live, the stripe gets pink. I installed xubuntu 64bit from an alternate cd and I didnt have problems until de reboot after the installation. Same problem, just a black screen with the green stripe than blackscreen. I tried several things: adding nomodeset to the bootmenu, but than I get: No connection to plymouth and it is stuck at checking the battery status. I tried to replace quiet splash with text. Didnt work either. actually one time I saw a blue booting image before that. I managed to get a root command though via the recovery boot. I didnt dare to just remove the plymouth package. Can I just delete plymouth or do I have to deinstall it as described in several ways. (Problem is, right now the notebook doesnt have a internet connection. And I dont know how to manage it with a usb stick?) Or do I have to install the AMD catalyst driver manually? (Again, how can I do that with an usb stick) I also tried this: Ubuntu hits a black screen after boot. Is there any solution without internet? And if I need internet which is the right one? Please explain step by step what I have to write and so on! Thank you! also tried: set gfxpayload=text and: just remove splash and adding vesafb.nonsense=1 to the grub editor, because I couldnt find it anywhere

  Read the article

• Social Engagement: One Size Doesn't Fit Anyone

  - by Mike Stiles

  The key to achieving meaningful social engagement is to know who you’re talking to, know what they like, and consistently deliver that kind of material to them. Every magazine for women knows this. When you read the article titles promoted on their covers, there’s no mistaking for whom that magazine is intended. And yet, confusion still reigns at many brands as to exactly whom they want to talk to, what those people want to hear, and what kind of content they should be creating for them. In most instances, the root problem is brands want to be all things to all people. Their target audience…the world! Good luck with that. It’s 2012, the age of aggregation and custom content delivery. To cope with the modern day barrage of information, people have constructed technological filters so that content they regard as being “for them” is mostly what gets through. Even if your brand is for men and women, young and old, you may want to consider social properties that divide men from women, and young from old. Yes, a man might find something in a women’s magazine that interests him. But that doesn’t mean he’s going to subscribe to it, or buy even one issue. In fact he’ll probably never see the article he’d otherwise be interested in, because in his mind, “This isn’t for me.” It wasn’t packaged for him. News Flash: men and women are different. So it’s a tall order to craft your Facebook Page or Twitter handle to simultaneously exude the motivators for both. The Harris Interactive study “2012 Connecting and Communicating Online: State of Social Media” sheds light on the differing social behaviors and drivers. -65% of women (vs. 59% of men) stay glued to social because they don’t want to miss anything. -25% of women check social when they wake up, before they check email. Only 18% of men check social before e-mail. -95% of women surveyed belong to Facebook vs. 86% of men. -67% of women log in to Facebook once a day or more vs. 54% of men. -Conventional wisdom is Pinterest is mostly a woman-thing, right? That may be true for viewing, but not true for sharing. Men are actually more likely to share on Pinterest than women, 23% to 10%. -The sharing divide extends to YouTube. 68% of women use it mainly for consumption, as opposed to 52% of men. -Women are as likely to have a Twitter account as men, but they’re much less likely to check it often. 54% of women check it once a week compared to 2/3 of men. Obviously, there are some takeaways from this depending on your target. Women don’t want to miss out on anything, so serialized content might be a good idea, right? Promotional posts that lead to a big payoff could keep them hooked. Posts for women might be better served first thing in the morning. If sharing is your goal, maybe male-targeted content is more likely to get those desired shares. And maybe Twitter is a better place to aim your male-targeted content than Facebook. Some grocery stores started experimenting with male-only aisles. The results have been impressive. Why? Because while it’s true men were finding those same items in the store just fine before, now something has been created just for them. They have a place in the store where they belong. Each brand’s strategy and targets are going to differ. The point is…know who you’re talking to, know how they behave, know what they like, and deliver content using any number of social relationship management targeting tools that meets their expectations. If, however, you’re committed to a one-size-fits-all, “our content is for everybody” strategy (or even worse, a “this is what we want to put out and we expect everybody to love it” strategy), your content will miss the mark for more often than it hits. @mikestilesPhoto via stock.schng

  Read the article

• How to connect MTS MBlaze on ubuntu 11.04

  - by murali_ma

  i have installed ubuntu 11.04 inside the windows xp. i have MTS Mblaze USB Modem. (my service provider is MTS MBlaze,india) i want to use Mblaze into ubuntu so that i did the following steps for make connecting the device. from the task bar->edit connections->mobile broadband->choose country->mts mblaze and ok i give username and password ([email protected] and password MTS. ok now i enable mobile broadband , MTS MBlaze connection1(connection name) from task bar. steps followed from "http://randomshandom.wordpress.com/2010/12/20/how-to-connect-mts-mblaze-device-in-ubuntu-10-10-11-04/#more-3" for the first time it successfully connected and browse the internet. after i restart the system i connect it. it does not connected. it shows Modem network disconnected. i accessed many times and delete the connection and recreated but i does not help me. if i try to connect device i think it the search the network, i saw the wave signal. img Image for showing problem:

  Read the article

• Configuring Wireless Network

  - by Vinod K

  I have vyataa router on VMware with 2 interfaces eth0 and eth1 eth0 is facing the internet eth0 is in Nat mode with dhcp on eth1 is in bridged mode with my ethernet with ip 10.0.2.34/24 The ethernet card is at ip 10.0.2.95/24 i have defined the nat rule. Hence internet is available at eth1 too. Now i am connecting a wireless router at "eth1" iball router, I have connected the router using a cable to the ethernet interface of my laptop. I have configured the WAN connection type as "Static IP" and given "10.0.2.34/24" All the clients that connect using wireless router cannot connect to the internet though. Could anyone provide me a solution for this.. Thank You!!

  Read the article

• Facebook shared links not opening (Redirecting correctly) [on hold]

  - by Hammad

  I have been in a problem and after hours of searching find nothing useful to counter it. I have a website, and that website has RSS feed attached to facebook page. As I post the content to website it also appears on facebook page. But I have people complaining on my page that my posts don't open when they click the link to read the details. Since I am a Chrome user and didn't notice this happening for months. But as I checked it through firefox and Internet Explorer, I found the links shared actually don't open with these browswers. They only work in Chrome, means they are properly redirected in chrome browser and not in firefox and IE. Whenever I click on links of posts on my page through IE or firefox the url does not simply redirect to my website and I get to see nothing as if I am not connecting to Internet. When examining URL I see this: http://www.facebook.com/l.php?u=http%3A%2F%2Fbit.ly%2F112NVO9&h=EAQHDgTUv&s=1 Which shows that facebook is not redirecting the links properly. Moreover I also use link shortening service bit.ly to shorten my shared links. I have checked same problem exists even if I don't shorten my links. And I checked I am not alone, even the tech giant website mashable.com links also don't open in IE and FF from facebook, they only open in Chrome. From mobile phone the links don't open (redirected properly) even in chrome. Can anyone tell me what is the issue? Nothing much is written about it on Internet as no once has faced this problem. P.S: I have checked from different systems, the problem persists.

  Read the article

• Access my router's gateway network?

  - by Danpe

  I have 2 routers in my place. Main Router (Connected to the Internet) - 192.168.1.1 Secondery Router (Connected to the Main Router) - 192.168.0.1 I have a Network Storage Device and few Shared Directorys connected to the Main Router. (Network Storage - 192.168.1.16) How can i acces one of them using a PC connected to the Secondery Router? Home Network Diagram: I currently have access to the internet using both laptop and Main PC. But i want to get access from my laptop to the Storage and to ym shared directorys. The problem is the my Main router always forwards all packets stright to the WAN.. (Internet)

  Read the article

• Why can't my networks reach each other?

  - by HOLOGRAPHICpizza

  We have two Buffalo WZR-HP-G300NH2 routers, with the default firmware, DD-WRT v24SP2-MULTI (10/31/11) std - build 17798. Each has a separate cable internet connection with a public static IP address. They are both in the 24.123.68.0/24 space. Both of them can contact pretty much the whole internet, and they can both be accessed out on the internet with no problem, but for some reason they can't talk to each other! When I try to ping one from the other I always get "Destination Host Unreachable". There are no strange routing or firewall rules in place. And they are both set to respond to pings, I can ping them from outside. Our main IT guy is going to call our ISP on Monday, but I'm impatient, so does anyone have any ideas?

  Read the article

• Routing using Linux with 2 NIC cards

  - by Kevin Parker

  Configured Clear OS to be in Gateway mode on a machine with two NIC cards. eth0:192.168.2.0/24 with ip 192.168.2.27 which is connected to a modem and thus have internet connectivity. eth1:192.168.122.0/24 with ip 192.168.122.10 which is connected to other machines in LAN through switch. LAN machines with network 192.168.122.0 is not getting internet.How can they get internet Through Clear OS gateway.I have enabled packet forwarding in clear os using "ip_forward=1" What am i missing?.Can you please help me in this. Following are the static routing i have added: on LAN machine1 with ip address 192.168.122.11 ip route add 192.168.2.0/24 via 192.168.122.10 dev eth0 ip route show 192.168.2.0/24 via 192.168.122.10 dev eth0 192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.11 But still 192.168.2.0/24 network is not reachable.Where can be the problem??

  Read the article

• Getting around broken DNS

  - by Haedrian

  I have someone who's trying to connect to the internet from a connection where the DNS server seems to be down. They can connect if I give them an ip address, but it can't resolve normal names. I tried getting them to change the DNS used from the internet options (setting it to use Google's) - however that didn't work - apparently the isp captures all dns requests. I also tried with a proxy but that didn't work either. Is there another solution to the problem? This isn't a case of censorship or anything, so there's no need to remain anonymous or whatever - I just need a way of 'forcing' the use of another dns server or routing the internet using something else.

  Read the article

• pptp VPN, routing

  - by Adrian

  Details: eth0 = current internet port pptp1 = VPN connection, if I connect to my provider, he give me an IP address, which is accessible from the internet. This is what I need. I want to connect through this IP back to my PC. I want to keep my primary internet connection (eth0) on my PC for all traffic, but route traffic to VPN for specified application/or port, to access application/port from the IP, which I given from the pptp provider. Huhh? Difficult but, it is possible? If yes, how? Incoming port will be always: 33340 Outgoing port can be change, but usually it is 33330

  Read the article

• How to connect ethernet on ubuntu (with auto-detection by Ubuntu)

  - by user12285

  Do I need to post another thread for the same? If so, sorry. Yes, I saw that it's been well over six months but I have the same router SmartAX MT880d with ethernet, and the exact same problem, that is no internet even though I can successfully reach the modem settings page by entering 192.168.1.1 in Firefox. Sorry if I don't use the right (technical) terminology to express my issue. English is not my mother tongue. I'm a total beginner with ubuntu. My internet works great in Windows but does not work in Ubuntu. For 2 weeks, I've kept reading on the web and forums and the ubuntuguide.org to name a few but to no avail. Now I see no other solution but to ask for help. My problem is that as a beginner, I can't find a way to put the right digits in the right place because I don't know what numbers I need to put in what files (eg: do I need to use DHCP? or a static IP address? No clue whatsoever. I'm confused between putting figures in the wrong spaces. For example, is the modem/router's IP exactly 192.168.1.1 for Huawei Smart AXMT880d modem?? Is the subnet 255.255.255.0? Gateway 192.168.1.1. I'm confused as I can also see a different IP starting with 155131*** (is it an account number? no clue again) on my contract with Huawei (a Chinese ISP). Apart from calling 911, what other numbers do I need to put in and where? How do I check that all the numbers have been entered correctly in every appropriate space before trying to connect the Internet?

  Read the article

• Bridging two connections in windows 7

  - by Serban Razvan

  I have recently bought an Samsung UE32ES5500 and I want to connect it to the internet. Not wanting to buy an expensive Samsung wireless adapter for the TV, I've decided to use an ethernet cable. Because the Internet cable passes through underground to the bedroom and the TV is located in the living room, i decided to put a router in the bedroom, and receive it's signal in the living room using a windows 7 laptop. Afterwards I connected the laptop to the TV through an ethernet cable, and bridged the two connections in Network Connections in Control Panel on the laptop. The TV successfully finds the laptop (and the router I think) but still cannot connect to the internet. Does anyone knows a solution to this problem? (the connections must be bridged because I want to have only one network in the house)

  Read the article

• Wired connection to windows ISC stopped working

  - by cmpickle

  I have had my Linux box connected to the internet through a Windows computer by wiring them together with a cat5 cable then the Windows is connected wireless to a router. This setup has worked since I got the Linux box but just yesterday stopped working. The changes that occurred were: I changed networking so that I was connecting the Linux box and Windows computer through a second router so during that time the Linux box went through a router to connect to the Windows computer that was still connected wireless to the first router. The Internet didn't work on the Linux box at the time they second router was involved when I removed it and directly connected the Linux box and Windows the Internet worked again. Another thing that changed was that I had disconnected my Windows computer from all network connections and deleted them to make my Ethernet work better. Also at that time my dad had I connect the Windows to a third router and changed some settings in it. After reconnecting this time the connection between the router and the windows would not establish. If anyone has any ideas as to why this is I would greatly appreciate it!

  Read the article

• Is there a way to stream wirelessly from a laptop to a TV?

  - by Robsta

  I heard of such a thing like a box or a media player such thing that can connect wirelessly to stream movies from my laptop? Is there such a thing that can do it? How is the latency on it? I have fast internet so that's not an issue, or is there such a box that connects with Bluetooth for better connection? I need these box to also be able to browse the internet because I'd like to stream movies from YouTube. I have heard of a thing called boxee, but is that what I'm looking for? I have windows 7 as my os, with an HDMI out and a GPU with a 555m. My laptop is powerful enough and my internet is 25mbps with a cap of 150GB. All i would really like to know is what this device is called? A media box?

  Read the article

• How to clear unshown OSD notifications

  - by Avatar Parto

  I am a webmaster of 2 active websites. Every time I start Thunderbird, it downloads all the new messages from the admin mail addresses of these sites - [email protected], [email protected], [email protected], etc. There are about 20 of them - this includes my personal email accounts. Now, am not always connected to the internet and there arises cases where I need to access already downloaded mails. Thunderbird then tries to connect to the internet, which it can't coz am offline, and then displays about twenty OSD notifications, one after the other, telling me that connection for each email address has failed. That's frustrating and it really eating me up. Am looking for a way, either: 1. To tell Thunderbird NOT to connect to the internet when am offline, or 2. To clear all these notifications after like the first one shows. And if it will help, am using ubuntu 13.04 and Thunderbird 24.0 and I always keep my computer fully updated. Any help is welcome. Thanxs.

  Read the article

• VPN service for 4in6

  - by Deshene

  I have a local network with internet access. But unfortunately IPv4 internet connection speed is limited to 1mbps, which is realy sad. Fortunately I have a native IPv6, and there is no connection speed limit over IPv6. So, in order to get a good internet connection I made a plan: connect to the VPN-service over IPv6, and pass all IPv4 traffic through IPv6 tunnel, or something like that, I think you get the idea. I suggested to use service like HideMyAss.com, but unfortunately they don't support IPv6. The question is: Is there any existing VPN service that will make my dreams come true, and is easy to use, which I could connect over PPTP or OpenVPN (I want to set up connection to VPN in my router settings).

  Read the article

• How can I join two simple home networks together using an ethernet cable?

  - by Ilia Jerebtsov

  I want to join two different home networks together like so: PC A1 PC A2 PC B1 PC B2 \ / \ / Gateway A <----- ethr. cable -----> Gateway B | | ADSL modem A ADSL modem B Both networks are of the basic residential type with identical configuration, with all PCs running Vista/7. The point is to temporarily join two apartments in a building for gaming and file sharing, and the holy grail would be: PCs on network A can access PCs on network B and vice-versa (file shares and gaming). Each network uses its own internet connection. Data between networks shouldn't take a trip through the internet (broadband upload speeds are severely capped) A network's internet access should continue working if the joining cable is disconnected with minimal configuration changes. How closely can this be achieved?

  Read the article

• Remote connection to dynamic public ip & private ip addresses

  - by user51737

  Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

  Read the article

• Running a program causes everything afterwards to minimize

  - by Xitcod13

  I just installed LoL (league of legends) on my computer. The problem is that almost every time after I play the game, it minimizes all my windows which is really annoying. What is worse however is that afterwards other programs do this as well. Is there any way to fix this? What can cause such a strange behavior?? I recently installed the internet driver. Hopefully that is not the problem because this is the third internet card for this computer. I have noticed that my internet is messing up as well.

  Read the article

< Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >