Search Results

Search found 3028 results on 122 pages for 'steve dc tang'.

Page 42/122 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• Multi screens are not aligning properly

  - by Steve

  I am using (4) Samsung (SMB2230) screens. When I place my mouse on the first screen at the bottom right and pull it into the second screen the mouse jumps to the middle on the left of the second screen. Then it does the same on the 3rd and 4th screens. The biggest jump is between the 1st and 2nd then it tightens up between 2 and 3 then close between 3 and 4. This is a really pain because my mouse gets hung up and I have to move up and down to get it to change screens.I had (4) Dells screens before and this didn't happen. I'm using Windows 7

  Read the article

• computer and User Account Migrated using ADMT but not sending mail

  - by TJ

  I have successfully migrated a User and Computer account using ADMT. The user is able to login to the computer with the new account and is able to open outlook receive mail but is not able to send internal or external mail. The Exchange server is still in the Old domain. The bounce back message received was that the user doesn't have permissions to send to the recipient. When I migrated the user I did migrate the SID history so why is mail not being about to be sent? The body of the bounce back message is as follows: Your message did not reach some or all of the intended recipients. Subject: test Sent: 1/6/2010 4:17 PM The following recipient(s) could not be reached: User, user on 1/6/2010 4:17 PM You do not have permission to send to this recipient. For assistance, contact your system administrator. MSEXCH:MSExchangeIS:/DC=com/DC=DOMAIN:SERVER

  Read the article

• Looking for a free/cheap backup solution on OSX for NTFS external HDD [closed]

  - by Steve Middleton

  Hi, I'm looking for an incremental backup system on OSX that plays nice with USB NTFS-formatted external HDDs. I an currently using NTFS-3G (http://macntfs-3g.blogspot.com/) to work with the HDD, but since Time Machine doesn't work with NTFS drives, I have just been manually copying files from my HDD to back it up (ugh). I need to use an NTFS drive because I am going back and forth between Windows machines at my school and a mac at home. I have no permissions at my school to install any Windows software, so I am forced to find a OSX solution. Please -- any help you can give me would be greatly appreciated! Thanks!

  Read the article

• MX Record for SubDomains

  - by Steve Sloka

  I want to be able to send email to any subdomain I like and not have to configure A records and MX records for each subdomain. Ideally I could send an email to [email protected] and [email protected] and not have to configure anything other than my original domain.com. My current setup: I have a domain (domain.com) and want to have multiple subdomains. (a.domain.com, b.domain.com, c.domain.com, etc). I have an MX record setup to point to domain.com and all email works fine for that domain. I have NOT setup A records for all the subdomains (and really don't want to).

  Read the article

• Time Capsule Refuses to Connect After Interrupted File Transfer

  - by Steve Stifler

  I have a first generation Apple Time Capsule set up as a NAS on my network. I use the built-in hard drive for Time Machine backups, with a 1.5 TB external HDD attached to the Time Capsule over USB. Whenever I cancel a file transfer from the external drive to my Macbook (or quit a video I had been streaming from it, as was the most recent incident), I can no longer connect to the Time Capsule or the attached drive, and I have to unplug it to get it working again. How can I fix this? Is it a network error? Could the Time Capsule be at fault or could it be my computer?

  Read the article

• Sync Gmail, Google Contacts, Google Calendar with Microsoft Exchange

  - by Steve Dolan

  At my work we only use Microsoft Exchange. As I hate Outlook and much prefer Google's services, I'd like to be able to sync my email, calendar, and contacts to a Gmail account. It looks like Google shut down their Google Sync service for Gmail accounts earlier this year: http://support.google.com/a/bin/answer.py?hl=en&answer=2716936. They are recommending IMAP, CalDAV, and CardDAV. I'm having trouble even setting up IMAP to work with Exchange. Is this the best way to go or is there a better solution?

  Read the article

• Specify Credentials to run Powershell Script to Query AD

  - by Ben

  I want to run a powershell script to query AD from a machine that is NOT on the domain. Basically I want to query to see if there is computer account already on the domain for this machine and create it if there is not. Because this has to happen before the machine joins the domain I assume I will need to specify some credentials to enable it to run. (I'm pretty new to Powershell, so apologies if this is a newbie question!) The script I am using to check the account is below, and then once this has run it will join the domain using the computername specified. Can you tell me how to specify some domain credentials to run this section of the script as? Cheers, Ben $found=$false $thisComputer = <SERVICE TAG FROM BIOS> $ou = [ADSI]"LDAP://OU=My Computer OU,DC=myDomain,DC=com" foreach ($child in $ou.psbase.Children ) { if ($child.ObjectCategory -like '*computer*') { If ($child.Name -eq $thisComputer) { $found=$true } } } If ($found) { <DELETE THE EXISTING ACCOUNT> }

  Read the article

• kerberos5 unable to authenticate

  - by wolfgangsz

  We have a Debian file server, configured to serve up samba shares, using winbind and kerberos. This is configured to authenticate against a Windows2003 DC. All worked fine until recently when I did a maintenance update on all packages. Since then, all attempts to connect to any of the shares (and also to just log into the box) fail. The logs contain this message, which seems to be at the root of the evil: [2009/09/14 12:04:29, 10] libsmb/clikrb5.c:get_krb5_smb_session_key(685) Got KRB5 session key of length 16 [2009/09/14 12:04:29, 10] libsmb/clikrb5.c:unwrap_pac(280) authorization data is not a Windows PAC (type: 141) [2009/09/14 12:04:29, 3] libads/kerberos_verify.c:ads_verify_ticket(430) ads_verify_ticket: did not retrieve auth data. continuing without PAC From there on it fails to find the user account on the DC, subsequently remaps the user to user nobody and then (rightly) refuses to grant access to the share. However, the following works just fine: wbinfo -a user%password I was wondering whether anybody has had this problem and could provide some insight. I would be happy to provide neutralised config files.

  Read the article

• Entering data into AD LDS

  - by Robert Koritnik

  I need some help configuring AD LDS (Active Directory Lightweight Directory Services). I'm not an administrator, have never configured domains and I don't have a clue how to add new users to existing domains. The thing is I need to develop an app that must be connected to AD. I've chosen AD LDS because I can install it on Windows 7 and it acts as an active directory even though there's no dmain controller present in the network. What I've done so far: I've installed AD LDS I've added a new instance with appication directory partition name DN=Air,DC=Watanabe,DC=pri I can connect to it using ADSI Edit and see all kinds of strange But now I don't know what to do? When it opens I can see the window below, but where's next? Can anybody give me some guidelines, how can I add domain users, so I can use them in my app AD required app?

  Read the article

• OpenBSD logins via SSH seem to be ignoring my configured radius server

  - by Steve Kemp

  I've installed and configured a radius server upon my localhost - it is delegating auth to a remote LDAP server. Initially things look good: I can test via the console: # export user=skemp # export pass=xxx # radtest $user $pass localhost 1812 $secret Sending Access-Request of id 185 to 127.0.0.1 port 1812 User-Name = "skemp" User-Password = "xxx" NAS-IP-Address = 192.168.1.168 NAS-Port = 1812 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=185, Similarly I can use the login tool to do the same thing: bash-4.0# /usr/libexec/auth/login_radius -d -s login $user radius Password: $pass authorize However remote logins via SSH are failing, and so are invokations of "login" started by root. Looking at /var/log/radiusd.log I see no actual log of success/failure which I do see when using either of the previous tools. Instead sshd is just logging: sshd[23938]: Failed publickey for skemp from 192.168.1.9 sshd[23938]: Failed keyboard-interactive for skemp from 192.168.1.9 port 36259 ssh2 sshd[23938]: Failed password for skemp from 192.168.1.9 port 36259 ssh2 In /etc/login.conf I have this: # Default allowed authentication styles auth-defaults:auth=radius: ... radius:\ :auth=radius:\ :radius-server=localhost:\ :radius-port=1812:\ :radius-timeout=1:\ :radius-retries=5:

  Read the article

• How do I do a swing migration of Exchange 2007?

  - by Graeme Donaldson

  As per my previous question, I have an Exchange 2007 box which is also a DC. Since I can demote it while Exchange is installed, I need to a swing migration. Does anyone have any articles, tips or experiences to share on this? The last time I did a swing it was with Exchange 2003 and even that is a little rusty in my head. The setup is a single Exchange 2007 Hub/Edge/Mailbox/CAS server. Its currently on Windows Server 2008, I can migrate it to the same OS, or I can go to 2008 R2, I'm not really picky on that. We're running OWA/ActiveSync/POP3(S)/IMAP(S) for client access. I already have another fully functional DC/GC/DNS box in the same site and clients in the site are already using that for DNS. It's also the preferred site bridgehead for AD replication. Any tips?

  Read the article

• Surprising corruption and never-ending fsck after resizing a filesystem.

  - by Steve Kemp

  System in question has Debian Lenny installed, running a 2.65.27.38 kernel. System has 16Gb memory, and 8x1Tb drives running behind a 3Ware RAID card. The storage is managed via LVM. Short version: Running a KVM guest which had 1.7Tb storage allocated to it. The guest was reaching a full-disk. So we decided to resize the disk that it was running upon We're pretty familiar with LVM, and KVM, so we figured this would be a painless operation: Stop the KVM guest. Extend the size of the LVM partition: "lvextend -L+500Gb ..." Check the filesystem : "e2fsck -f /dev/mapper/..." Resize the filesystem: "resize2fs /dev/mapper/" Start the guest. The guest booted successfully, and running "df" showed the extra space, however a short time later the system decided to remount the filesystem read-only, without any explicit indication of error. Being paranoid we shut the guest down and ran the filesystem check again, given the new size of the filesystem we expected this to take a while, however it has now been running for 24 hours and there is no indication of how long it will take. Using strace I can see the fsck is "doing stuff", similarly running "vmstat 1" I can see that there are a lot of block input/output operations occurring. So now my question is threefold: Has anybody come across a similar situation? Generally we've done this kind of resize in the past with zero issues. What is the most likely cause? (3Ware card shows the RAID arrays of the backing stores as being A-OK, the host system hasn't rebooted and nothing in dmesg looks important/unusual) Ignoring brtfs + ext3 (not mature enough to trust) should we make our larger partitions in a different filesystem in the future to avoid either this corruption (whatever the cause) or reduce the fsck time? xfs seems like the obvious candidate?

  Read the article

• How can I disable the IR/Remote Control on an HP Laptop?

  - by Steve Rowe

  I've seen this happen on 2 different HP laptops now. If I try to use them in the same room as a Media Center, the MCE TV remote keeps sending commands to the laptop. This can do anything from wake it up and turn it on to just moving the selection around. There is no obvious way to disable the IR sensor or at least its response to the remote. Does anyone know how to do this?

  Read the article

• RoboCopy errors on Windows Server 2008

  - by Steve

  I am getting bizarre error with RoboCopy in Server 2008. It will randomly hang with "The specified network name is no longer available." error. Once that happens, it will continue to fail on the retries. But of course the remote server IS still available on the network and can be reached with other tools. I think it must be somehow permission related but I can't figure out what is wrong. Any ideas would be much appreciated. Other info: Options : *.* /S /E /COPY:DAT /NP /R:10 /W:30 If I turn on the /B option it will fail 100% of the time at the very beginning (that's why I think it has to be somehow permission-related) The two servers are standalone and I am doing a NET USE command prior to the robocopy It does not matter what user account on the remote server. Tried both Administrator and another user which was also a member of the local Administrators group UAC is turned off on both sides It is not always the same file that hangs. Sometimes it will get through half or more and sometimes it will fail on the first file

  Read the article

• Does SpinRite do what it claims to do?

  - by romandas

  I don't have any real (i.e. professional) experience with Steve Gibson's SpinRite so I'd like to put this to the SF community. Does SpinRite actually do what it claims? Is it a good product to use? With a proper backup solution and RAID fault tolerance, I've never found need for it, but I'm curious. There seems to be some conflicting messages regarding it, and no hard data to be found either way. On one hand, I've heard many home users claim it helped them, but I've heard home users say a lot of things -- most of the time they don't have the knowledge or experience to accurately describe what really happened. On the other hand, Steve's own description and documentation don't give me a warm fuzzy about it either. So what is the truth of the matter? Would you use it?

  Read the article

• At what point does Active Directory and Domain Services become necessary? [closed]

  - by user970638

  I see time and time again such services running in a business environment with only 10 users. Everyone in the office authenticates with the DC and interacts with a shared drive where files and documents are stored. I can't help but think...reeeeealy? But I don't know, that's why I'm asking. To me it seems like you need to reach a certain threshold of size and needs before you throw a DC into the mix. ie: a 20+ user business (and growing) with permission requirements that separate the sales team from accounting. Thoughts?

  Read the article

• Failure to create keytab file using msktutil on Centos to W2K8

  - by user49321

  I'm trying to setup a centos 5.5 squid server to authenticate against a windows 2008 DC. I have followed the tutorial: http://serverfault.com/questions/66556/getting-squid-to-authenticate-with-kerberos-and-windows-2008-2003-7-xp However I have run into an issue. When I run the command: (Obviously changed for my enviroment) # msktutil -c -b "CN=COMPUTERS" -s HTTP/centos.dom.local -h centos.dom.local -k /etc/HTTP.keytab --computer-name centos-http --upn HTTP/centos.dom.local --server server.dom.local --verbose --enctypes 28 I get the following error (The whole message is too long to post here): Error: Unable to set machine password for centos: (3) Authentication error Error: set_password failed kinit works fine and the computer is added to the DC under COMPUTERS and SRV records created except no keytab is created.

  Read the article

• How to create public html (apache2) with LDAP authentication?

  - by borjamf

  Im running Apache2 on Ubuntu 12.04 Server because I want to create a home directory for each ldap user. I'm using LDAP for authentication and it's working ok. Also I've done some tests with LDAP module for Apache2 and it's working ok. The problem with this LDAP authentication is that any success login can access to ~user/public_html, even if the user is not the owner of that home. I dont know how to control that, for example, userldap2 access to userldap1/public_html. I want that only the userldap1 access to userldap1. Could anybody tell me how to control that with LDAP authentication? I hope that you'll understand me. My config (auth_ldap.conf) <Directory /home/disco2/*/public_html> AuthName "Authentication" AuthType basic AuthBasicProvider ldap AuthzLDAPAuthoritative off AuthLDAPURL ldap://prueba.borja/dc=prueba,dc=borja?uid? Require ldap-filter objectClass=posixAccount </Directory>

  Read the article

• FTP in DMZ, TCP Ports for LDAP Auth

  - by sam

  szenario: (outside)---(ASA5510)---(inside) -Windows2008 DC .....................(dmz) ..........-Win2008 FTP Server Which Ports do I need to open from DMZ-Inside that FTP Users can authentificated on the Inside DC? I have allready opend 389 (Ldap), 636 (secure Ldap) and 53 (dns). But the ftp Client stucks allways after processing the credentials and the FTP Server gives you an eventlog "logon error". the error messages indicates that there could be an issue with closed ports. if I turn the ACL to "IP", that means all ports are open, everything is working fine.

  Read the article

• IPsec Policy Agent flip-flopping demand start/auto start in Windows Server 2008?

  - by Steve Wortham

  Looking through the event logs on my web server I noticed a strange pattern. The following events have been occurring over and over again, always back to back: The start type of the IPsec Policy Agent service was changed from demand start to auto start. The start type of the IPsec Policy Agent service was changed from auto start to demand start. Each one produces event id 7040 from the Service Control Manager. And sometimes this will happen 20 times in one minute. Any idea what would cause this? I've been trying to pinpoint an intermittent performance problem for the past several days and this is the most peculiar thing I've found so far. I'm running Windows Server 2008, SQL Server 2008, and ASP.NET 3.5 w/ MVC 1.

  Read the article

• Setup routing and iptables for new VPN connection to redirect **only** ports 80 and 443

  - by Steve

  I have a new VPN connection (using openvpn) to allow me to route around some ISP restrictions. Whilst it is working fine, it is taking all the traffic over the vpn. This is causing me issues for downloading (my internet connection is a lot faster than the vpn allows), and for remote access. I run an ssh server, and have a daemon running that allows me to schdule downloads via my phone. I have my existing ethernet connection on eth0, and the new VPN connection on tun0. I believe I need to setup the default route to use my existing eth0 connection on the 192.168.0.0/24 network, and set the default gateway to 192.168.0.1 (my knowledge is shaky as I haven't done this for a number of years). If that is correct, then I'm not exactly sure how to do it!. My current routing table is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface MSS Window irtt 0.0.0.0 10.51.0.169 0.0.0.0 UG 0 0 0 tun0 0 0 0 10.51.0.1 10.51.0.169 255.255.255.255 UGH 0 0 0 tun0 0 0 0 10.51.0.169 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 0 0 0 85.25.147.49 192.168.0.1 255.255.255.255 UGH 0 0 0 eth0 0 0 0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0 0 0 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 0 0 0 After fixing the routing, I believe I need to use iptables to configure prerouting or masquerading to force everything for destination port 80 or 443 over tun0. Again, I'm not exactly sure how to do this! Everything I've found on the internet is trying to do something far more complicated, and trying to sort the wood from the trees is proving difficult. Any help would be much appreciated. UPDATE So far, from the various sources, I've cobbled together the following: #!/bin/sh DEV1=eth0 IP1=`ifconfig|perl -nE'/dr:(\S+)/&&say$1'|grep 192.` GW1=192.168.0.1 TABLE1=internet TABLE2=vpn DEV2=tun0 IP2=`ifconfig|perl -nE'/dr:(\S+)/&&say$1'|grep 10.` GW2=`route -n | grep 'UG[ \t]' | awk '{print $2}'` ip route flush table $TABLE1 ip route flush table $TABLE2 ip route show table main | grep -Ev ^default | while read ROUTE ; do ip route add table $TABLE1 $ROUTE ip route add table $TABLE2 $ROUTE done ip route add table $TABLE1 $GW1 dev $DEV1 src $IP1 ip route add table $TABLE2 $GW2 dev $DEV2 src $IP2 ip route add table $TABLE1 default via $GW1 ip route add table $TABLE2 default via $GW2 echo "1" > /proc/sys/net/ipv4/ip_forward echo "1" > /proc/sys/net/ipv4/ip_dynaddr ip rule add from $IP1 lookup $TABLE1 ip rule add from $IP2 lookup $TABLE2 ip rule add fwmark 1 lookup $TABLE1 ip rule add fwmark 2 lookup $TABLE2 iptables -t nat -A POSTROUTING -o $DEV1 -j SNAT --to-source $IP1 iptables -t nat -A POSTROUTING -o $DEV2 -j SNAT --to-source $IP2 iptables -t nat -A PREROUTING -m state --state ESTABLISHED,RELATED -j CONNMARK --restore-mark iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j CONNMARK --restore-mark iptables -t nat -A PREROUTING -i $DEV1 -m state --state NEW -j CONNMARK --set-mark 1 iptables -t nat -A PREROUTING -i $DEV2 -m state --state NEW -j CONNMARK --set-mark 2 iptables -t nat -A PREROUTING -m connmark --mark 1 -j MARK --set-mark 1 iptables -t nat -A PREROUTING -m connmark --mark 2 -j MARK --set-mark 2 iptables -t nat -A PREROUTING -m state --state NEW -m connmark ! --mark 0 -j CONNMARK --save-mark iptables -t mangle -A PREROUTING -i $DEV2 -m state --state NEW -p tcp --dport 80 -j CONNMARK --set-mark 2 iptables -t mangle -A PREROUTING -i $DEV2 -m state --state NEW -p tcp --dport 443 -j CONNMARK --set-mark 2 route del default route add default gw 192.168.0.1 eth0 Now this seems to be working. Except it isn't! Connections to the blocked websites are going through, connections not on ports 80 and 443 are using the non-VPN connection. However port 80 and 443 connections that aren't to the blocked websites are using the non-VPN connection too! As the general goal has been reached, I'm relatively happy, but it would be nice to know why it isn't working exactly right. Any ideas? For reference, I now have 3 routing tables, main, internet, and vpn. The listing of them is as follows... Main: default via 192.168.0.1 dev eth0 10.38.0.1 via 10.38.0.205 dev tun0 10.38.0.205 dev tun0 proto kernel scope link src 10.38.0.206 85.removed via 192.168.0.1 dev eth0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.73 metric 1 Internet: default via 192.168.0.1 dev eth0 10.38.0.1 via 10.38.0.205 dev tun0 10.38.0.205 dev tun0 proto kernel scope link src 10.38.0.206 85.removed via 192.168.0.1 dev eth0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.73 metric 1 192.168.0.1 dev eth0 scope link src 192.168.0.73 VPN: default via 10.38.0.205 dev tun0 10.38.0.1 via 10.38.0.205 dev tun0 10.38.0.205 dev tun0 proto kernel scope link src 10.38.0.206 85.removed via 192.168.0.1 dev eth0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.73 metric 1

  Read the article

• How to egrep the first character in second column?

  - by Steve

  using egrep, how can i print all lastnames start with K or k ??? Jennifer Cowan:548-834-2348:583 Laurel Ave., Kingsville, TX 83745:10/1/35:58900 Lesley Kirstin:408-456-1234:4 Harvard Square, Boston, MA 02133:4/22/62:52600 Jennifer Cowan:548-834-2348:583 Laurel Ave., kingsville, TX 83745:10/1/35:58900 Lesley kirstin:408-456-1234:4 Harvard Square, Boston, MA 02133:4/22/62:52600 William Kopf:846-836-2837:6937 Ware Road, Milton, PA 93756:9/21/46:43500 Arthur Putie:923-835-8745:23 Wimp Lane, Kensington, DL 38758:8/31/69:126000

  Read the article

• LDAP (slapd) creating users with access to specific trees

  - by Josh

  I am setting up a CentOS server with Virtualmin and Postfix, and I am trying to use LDAP to store unix users, groups, Postfix aliases and virtual domains. I am following the instructions from Webmin's site. I have created an LDAP domain and configured Postfix to fetch Aliases and Virtual Domains from LDAP, but in order to do so I had to configure postfix to authenticate with the master LDAP account, cn=Manager,dc=mydomain,dc=com. This seems like a terrible idea because that account has access to the Users and Groups, which postfix does not need access to. How can I create a new LDAP account for Postfix which only has access to the LDAP trees Postfix needs?

  Read the article

• Bolding/underlining/strikethrough-ing text in mutt

  - by Steve K

  Is there any way to bold, strike, or underline text in mutt? For instance, I currently have a couple of lines in my muttrc to make URLs and email addresses blue text on white background: color body blue white regex but I'd rather have that be blueunderline on white background. Likewise, I'd like to be able to bold unread mails in the index. (dunno if it's relevant, but I'm using Ubuntu's mutt-patched, which is compiled with ncurses.)

  Read the article

• network topology including many services

  - by mete

  I know this is yet another question on how to setup network but I hope you are not bored of such questions yet. The site is also an office, so it includes windows dc, windows ad, exchange, sql, file sharing, development app servers and other pcs. In addition to office (internal) things, there are both test and prod environments consisting of a web server-app server-sql stack. There is also ftp service open to public. I consider: dmz1 - web server - exchange edge - ftp dmz2 - app server - sql for app server internal - dc and ad - exchange hub and transport - internal file sharing - sql for internal use - app servers for internal use - pcs public - dmz1, only web, ftp and smtp public - dmz2 not possible public - internal not possible dmz1 - dmz2 is possible from web servers to app servers by using http or ajp dmz1 - internal is only possible for exchange, otherwise not possible dmz2 - internal not possible Does this sound ok ? Any other recommendations ? It will be configured using either MS ISA or Jupiter SSG. Thank you.

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >