Search Results

Search found 22065 results on 883 pages for 'performance testing'.

Page 420/883 | < Previous Page | 416 417 418 419 420 421 422 423 424 425 426 427  | Next Page >

• Which are the RDBMS that minimize the server roundtrips? Which RDBMS are better (in this area) than

  - by user193655

  When the latency is high ("when pinging the server takes time") the server roundtrips make the difference. Now I don't want to focus on the roundtrips created in programming, but the roundtrips that occur "under the hood" in the DB engine, so the roundtrips that are 100% dependant on how the RDBMS is written itself. I have been told that FireBird has more roundtrips than MySQL. But this is the only information I know. I am currently supporting MS SQL but I'd like to change RDBMS (because I use Express Editions and in my scenario they are quite limiting from the performance point of view), so to make a wise choice I would like to include also this point into "my RDBMS comparison feature matrix" to understand which is the best RDBMS to choose as an alternative to MS SQL. So the bold sentence above would make me prefer MySQL to Firebird (for the roundtrips concept, not in general), but can anyone add informations? And MS SQL where is it located? Is someone able to "rank" the roundtrip performance of the main RDBMS, or at least: MS SQL, MySql, Postegresql, Firebird (I am not interested in Oracle since it is not free, and if I have to change I would change to a free RDBMS). Anyway MySql (as mentioned several times on stackoverflow) has a not clear future and a not 100% free license. So my final choice will probably dall on PostgreSQL or Firebird. Additional info: somehow you can answer my question by making a simple list like: MSSQL:3; MySQL:1; Firebird:2; Postgresql:2 (where 1 is good, 2 average, 3 bad). Of course if you can post some links where the roundtrips per RDBMSs are compared it would be great

  Read the article

• Assemblies mysteriously loaded into new AppDomains

  - by Eric

  I'm testing some code that does work whenever assemblies are loaded into an appdomain. For unit testing (in VS2k8's built-in test host) I spin up a new, uniquely-named appdomain prior to each test with the idea that it should be "clean": [TestInitialize()] public void CalledBeforeEachTestMethod() { AppDomainSetup appSetup = new AppDomainSetup(); appSetup.ApplicationBase = @"G:\<ProjectDir>\bin\Debug"; Evidence baseEvidence = AppDomain.CurrentDomain.Evidence; Evidence evidence = new Evidence( baseEvidence ); _testAppDomain = AppDomain.CreateDomain( "myAppDomain" + _appDomainCounter++, evidence, appSetup ); } [TestMethod] public void MissingFactoryCausesAppDomainUnload() { SupportingClass supportClassObj = (SupportingClass)_testAppDomain.CreateInstanceAndUnwrap( GetType().Assembly.GetName().Name, typeof( SupportingClass ).FullName ); try { supportClassObj.LoadMissingRegistrationAssembly(); Assert.Fail( "Should have nuked the app domain" ); } catch( AppDomainUnloadedException ) { } } [TestMethod] public void InvalidFactoryMethodCausesAppDomainUnload() { SupportingClass supportClassObj = (SupportingClass)_testAppDomain.CreateInstanceAndUnwrap( GetType().Assembly.GetName().Name, typeof( SupportingClass ).FullName ); try { supportClassObj.LoadInvalidFactoriesAssembly(); Assert.Fail( "Should have nuked the app domain" ); } catch( AppDomainUnloadedException ) { } } public class SupportingClass : MarshalByRefObject { public void LoadMissingRegistrationAssembly() { MissingRegistration.Main(); } public void LoadInvalidFactoriesAssembly() { InvalidFactories.Main(); } } If every test is run individually I find that it works correctly; the appdomain is created and has only the few intended assemblies loaded. However, if multiple tests are run in succession then each _testAppDomain already has assemblies loaded from all previous tests. Oddly enough, the two tests get appdomains with different names. The test assemblies that define MissingRegistration and InvalidFactories (two different assemblies) are never loaded into the unit test's default appdomain. Can anyone explain this behavior?

  Read the article

• Some optimization about the code (computing ranks of a vector)?

  - by user1748356

  The following code is a function (performance-critical) to compute tied ranks of a vector: mergeSort(x,inds,ci); //a sort function to sort vector x of length ci, also returns keys (inds) of x. int tj=0; double xi=x[0]; for (int j = 1; j < ci; ++j) { if (x[j] > xi) { double rankvalue = 0.5 * (j - 1 + tj); for (int k = tj; k < j; ++k) { ranks[inds[k]]=rankvalue; }; tj = j; xi = x[j]; }; }; double rankvalue = 0.5 * (ci - 1 + tj); for (int k = tj; k < ci; ++k) { ranks[inds[k]]=rankvalue; }; The problem is, the supposed performance bottleneck mergeSort(), which is O(NlogN) is several times faster than the other part of codes (which is O(N)), which suggests there is room for huge improvment with the other part of the codes, any advices?

  Read the article

• SQL Server stored procedure return code oddity

  - by gbn

  Hello The client that calls this code is restricted and can only deal with return codes from stored procs. So, we modified our usual contract to RETURN -1 on error and default to RETURN 0 if no error If the code hits the inner catch block, then the RETURN code default to -4. Where does this come from, does anyone know...? IF OBJECT_ID('dbo.foo') IS NOT NULL DROP TABLE dbo.foo GO CREATE TABLE dbo.foo ( KeyCol char(12) NOT NULL, ValueCol xml NOT NULL, Comment varchar(1000) NULL, CONSTRAINT PK_foo PRIMARY KEY CLUSTERED (KeyCol) ) GO IF OBJECT_ID('dbo.bar') IS NOT NULL DROP PROCEDURE dbo.bar GO CREATE PROCEDURE dbo.bar @Key char(12), @Value xml, @Comment varchar(1000) AS SET NOCOUNT ON DECLARE @StartTranCount tinyint; BEGIN TRY SELECT @StartTranCount = @@TRANCOUNT; IF @StartTranCount = 0 BEGIN TRAN; BEGIN TRY --SELECT @StartTranCount = 'fish' INSERT dbo.foo (KeyCol, ValueCol, Comment) VALUES (@Key, @Value, @Comment); END TRY BEGIN CATCH IF ERROR_NUMBER() = 2627 --PK violation UPDATE dbo.foo SET ValueCol = @Value, Comment = @Comment WHERE KeyCol = @Key; ELSE RAISERROR ('Tits up', 16, 1); END CATCH IF @StartTranCount = 0 COMMIT TRAN; END TRY BEGIN CATCH IF @StartTranCount = 0 AND XACT_STATE() <> 0 ROLLBACK TRAN; RETURN -1 END CATCH --Without this, we'll send -4 if we hit the UPDATE CATCH block above --RETURN 0 GO --Run with RETURN 0 and fish line commented out DECLARE @rtn int EXEC @rtn = dbo.bar 'abcdefghijkl', '<foobar />', 'testing' SELECT @rtn; SELECT * FROM dbo.foo DECLARE @rtn int EXEC @rtn = dbo.bar 'abcdefghijkl', '<foobar2 />', 'testing2' --updated OK but we get @rtn = -4 SELECT @rtn; SELECT * FROM dbo.foo --uncomment fish line DECLARE @rtn int EXEC @rtn = dbo.bar 'abcdefghijkl', '<foobar />', 'testing' --Hit outer CATCH, @rtn = -1 as expected SELECT @rtn; SELECT * FROM dbo.foo

  Read the article

• Creating a tar file with checksums included

  - by wazoox

  Here's my problem : I need to archive to tar files a lot ( up to 60 TB) of big files (usually 30 to 40 GB each). I would like to make checksums ( md5, sha1, whatever) of these files before archiving; however not reading every file twice (once for checksumming, twice for tar'ing) is more or less a necessity to achieve a very high archiving performance (LTO-4 wants 120 MB/s sustained, and the backup window is limited). So I'd need some way to read a file, feeding a checksumming tool on one side, and building a tar to tape on the other side, something along : tar cf - files | tee tarfile.tar | md5sum - Except that I don't want the checksum of the whole archive (this sample shell code does just this) but a checksum for each individual file in the archive. I've studied GNU tar, Pax, Star options. I've looked at the source from Archive::Tar. I see no obvious way to achieve this. It looks like I'll have to hand-build something in C or similar to achieve what I need. Perl/Python/etc simply won't cut it performance-wise, and the various tar programs miss the necessary "plugin architecture". Does anyone know of any existing solution to this before I start code-churning ?

  Read the article

• Wrapping unmanaged C++ with C++/CLI - a proper approach.

  - by Jamie

  Hi there, as stated in the title, I want to have my old C++ library working in managed .NET. I think of two possibilities: 1) I might try to compile the library with /clr and try "It Just Works" approach. 2) I might write a managed wrapper to the unmanaged library. First of all, I want to have my library working FAST, as it was in unmanaged environment. Thus, I am not sure if the first approach will not cause a large decrease in performance. However, it seems to be faster to implement (not a right word :-)) (assuming it will work for me). On the other hand, I think of some problems that might appear while writing a wrapper (e.g. how to wrap some STL collection (vector for instance)?) I think of writing a wrapper residing in the same project as the unmanaged C++ resides - is that a reasonable approach (e.g. MyUnmanagedClass and MyManagedClass in the same project, the second wrapping the other)? What would you suggest in that problem? Which solution is going to give me better performance of the resulting code? Thank you in advance for any suggestions and clues! Cheers

  Read the article

• export a JOGL applet and embedd into a html page

  - by nkint

  hi guys it is some time that i'm testing opengl with java and JOGL. now i have good result and i wanto to pubblish it on web. but i have some problem. i'm in eclipse, and i'm testing an Applet with JOGL. first of all i have this run time error (but the program works correctly): java.lang.IllegalArgumentException: adding a window to a container at java.awt.Container.checkNotAWindow(Container.java:431) at java.awt.Container.addImpl(Container.java:1039) at java.awt.Container.add(Container.java:365) at AppletHelloWorld.init(AppletHelloWorld.java:30) at sun.applet.AppletPanel.run(AppletPanel.java:424) at java.lang.Thread.run(Thread.java:619) then i found this incredibly clear page and i do what is said, i open html with the browser, the libs are downloaded but it stops at "Starting applet AppletHelloWorld" that is the name i gave to my applet. mayebe i miss something like main function or exporting well the jar? this is my main code: public class AppletHelloWorld extends Applet { public static void main(String[] args) { JFrame fr=new JFrame(); fr.setBounds(0,0,1015,600); fr.add(new AppletHelloWorld()); fr.setVisible(true); } public void init() { setLayout(null); MyJOGLProject canvas = new MyJOGLProject(); //MyJOGLProject extends JFrame canvas.run(); Container c = new Container(); c.add(canvas); add(c); } //....

  Read the article

• Achieving Thread-Safety

  - by Smasher

  Question How can I make sure my application is thread-safe? Are their any common practices, testing methods, things to avoid, things to look for? Background I'm currently developing a server application that performs a number of background tasks in different threads and communicates with clients using Indy (using another bunch of automatically generated threads for the communication). Since the application should be highly availabe, a program crash is a very bad thing and I want to make sure that the application is thread-safe. No matter what, from time to time I discover a piece of code that throws an exception that never occured before and in most cases I realize that it is some kind of synchronization bug, where I forgot to synchronize my objects properly. Hence my question concerning best practices, testing of thread-safety and things like that. mghie: Thanks for the answer! I should perhaps be a little bit more precise. Just to be clear, I know about the principles of multithreading, I use synchronization (monitors) throughout my program and I know how to differentiate threading problems from other implementation problems. But nevertheless, I keep forgetting to add proper synchronization from time to time. Just to give an example, I used the RTL sort function in my code. Looked something like FKeyList.Sort (CompareKeysFunc); Turns out, that I had to synchronize FKeyList while sorting. It just don't came to my mind when initially writing that simple line of code. It's these thins I wanna talk about. What are the places where one easily forgets to add synchronization code? How do YOU make sure that you added sync code in all important places?

  Read the article

• How does DateTime.Now affect query plan caching in SQL Server?

  - by Bill Paetzke

  Question: Does passing DateTime.Now as a parameter to a proc prevent SQL Server from caching the query plan? If so, then is the web app missing out on huge performance gains? Possible Solution: I thought DateTime.Today.AddDays(1) would be a possible solution. It would pass the same end-date to the sql proc (per day). And the user would still get the latest data. Please speak to this as well. Given Example: Let's say we have a stored procedure. It reports data back to a user on a webpage. The user can set a date range. If the user sets today's date as the "end date," which includes today's data, the web app passes DateTime.Now to the sql proc. Let's say that one user runs a report--5/1/2010 to now--over and over several times. On the webpage, the user sees 5/1/2010 to 5/4/2010. But the web app passes DateTime.Now to the sql proc as the end date. So, the end date in the proc will always be different, although the user is querying a similar date range. Assume the number of records in the table and number of users are large. So any performance gains matter. Hence the importance of the question. Example proc and execution (if that helps to understand): CREATE PROCEDURE GetFooData @StartDate datetime @EndDate datetime AS SELECT * FROM Foo WHERE LogDate >= @StartDate AND LogDate < @EndDate Here's a sample execution using DateTime.Now: EXEC GetFooData '2010-05-01', '2010-05-04 15:41:27' -- passed in DateTime.Now Here's a sample execution using DateTime.Today.AddDays(1) EXEC GetFooData '2010-05-01', '2010-05-05' -- passed in DateTime.Today.AddDays(1) The same data is returned for both procs, since the current time is: 2010-05-04 15:41:27.

  Read the article

• Other test cases for this openFile function?

  - by igor

  I am trying to figure out why my function to open a file is failing this autograder I submit my homework into. What type of input would fail here, I can't think of anything else? Code: bool openFile(ifstream& ins) { char fileName[256]; cout << "Enter board filename: "; cin.getline(fileName,256); cout << endl << fileName << endl; ins.open(fileName); if(!ins) { ins.clear(); cout<<"Error opening file"<<endl; return false; } return true; } Here is output from the 'Autograder' of what my program's output is, and what the correct output is supposed to be (and I do not know what is in the file they use for the input) Autograder output: ******************************************* ***** ***** ***** Your output is: ***** ***** ***** ******************************************* Testing function openFile Enter board filename: test.txt 1 Enter board filename: not a fileName Error opening file 0 ******************************************* ***** ***** ***** Correct Output ***** ***** ***** ******************************************* Testing function openFile Enter board filename: 1 Enter board filename: Error opening file 0

  Read the article

• How to read time from recorded surveillance camera video?

  - by stressed_geek

  I have a problem where I have to read the time of recording from the video recorded by a surveillance camera. The time shows up on the top-left area of the video. Below is a link to screen grab of the area which shows the time. Also, the digit color(white/black) keeps changing during the duration of the video. http://i55.tinypic.com/2j5gca8.png Please guide me in the direction to approach this problem. I am a Java programmer so would prefer an approach through Java. EDIT: Thanks unhillbilly for the comment. I had looked at the Ron Cemer OCR library and its performance is much below our requirement. Since the ocr performance is less than desired, I was planning to build a character set using the screen grabs for all the digits, and using some image/pixel comparison library to compare the frame time with the character-set which will show a probabilistic result after comparison. So I was looking for a good image comparison library(I would be OK with a non-java library which I can run using the command-line). Also any advice on the above approach would be really helpful.

  Read the article

• Where to store site settings: DB? XML? CONFIG? CLASS FILES?

  - by Emin

  I am re-building a news portal of which already have a large number of visits every day. One of the major concerns when re-building this site was to maximize performance and speed. Having said this, we have done many things from caching, to all sort of other measures to ensure speed. Now towards the end of the project, I am having a dilemma of where to store my site settings that would least affect performance. The site settings will include things such as: Domain, DefaultImgPath, Google Analytics code, default emails of editors as well as more dynamic design/display feature settings such as the background color of specific DIVs and default color for links etc.. As far as I know, I have 4 choices in storing all these info. Database: Storing general settings in the DB and caching them may be a solution however, I want to limit the access to the database for only necessary and essential functions of the project which generally are insert/update/delete news items, author articles etc.. XML: I can store these settings in an XML file but I have not done this sort of thing before so I don't know what kind of problems -if any- I might face in the future. CONFIG: I can also store these settings in web.config CLASS FILE: I can hard code all these settings in a SiteSettings class, but since the site admin himself will be able to edit these settings, It may not be the best solution. Currently, I am more close to choosing web.config but letting people fiddle with it too often is something I do not want. E.g. if somehow, I miss out a validation for something and it breaks the web.config, the whole site will go down. My concern basically is that, I cannot forsee any possible consequences of using any of the methods above (or is there any other?), I was hoping to get this question over to more experienced people out here who hopefully help make my decision.

  Read the article

• Array: Recursive problem cracked me up

  - by VaioIsBorn

  An array of integers A[i] (i 1) is defined in the following way: an element A[k] ( k 1) is the smallest number greater than A[k-1] such that the sum of its digits is equal to the sum of the digits of the number 4* A[k-1] . You need to write a program that calculates the N th number in this array based on the given first element A[1] . INPUT: In one line of standard input there are two numbers seperated with a single space: A[1] (1 <= A[1] <= 100) and N (1 <= N <= 10000). OUTPUT: The standard output should only contain a single integer A[N] , the Nth number of the defined sequence. Input: 7 4 Output: 79 Explanation: Elements of the array are as follows: 7, 19, 49, 79... and the 4th element is solution. I tried solving this by coding a separate function that for a given number A[k] calculates the sum of it's digits and finds the smallest number greater than A[k-1] as it says in the problem, but with no success. The first testing failed because of a memory limit, the second testing failed because of a time limit, and now i don't have any possible idea how to solve this. One friend suggested recursion, but i don't know how to set that. Anyone who can help me in any way please write, also suggest some ideas about using recursion/DP for solving this problem. Thanks.

  Read the article

• Fatal error with Custom Magento Module on one server but not the other

  - by Jack

  Hi, I am creating my own custom module in Magento and during testing on a Litespeed server (PHP v5.2.14) I am getting a Fatal Error: Call to a member function batch() on a non-object in ../../../BatchController.php on line 25 that was not appearing during testing on another linux server and a wamp server (PHP v5.2.11). This one has stumped me. I am guessing it has something to do with the server configuration rather than the code itself. But i am just guessing. I was hoping someone here could tell me. The only real major difference I could see, aside from the php versions and environment, is that the server that the error is on is using the Suhosin Patch. But would that be something that could cause this? The line in question is Mage::getModel('mymodule/mymodel')->batch(); which is enclosed in an IF statement. batch() is a public function located in my model file. If you need more code let me know. Thanks!

  Read the article

• Multi-reader IPC solution?

  - by gct

  I'm working on a framework in C++ (just for fun for now), that lets the user write plugins that use a standard API to stream data between each other. There's going to be three basic transport mechanisms for the data: files, sockets, and some kind of IPC piping system. The system is set up so that for the non-file transport, each stream can have multiple readers. IE once a server socket it setup, multiple computers can connect and stream the data. I'm a little stuck at the multi-reader IPC system though. All my plugins run in threads so they live in the same address space, so some kind of shared memory system would work fine, I was thinking I'd write my own circular buffer with a write pointer and read pointers chassing it around the buffer, but I have my doubts that I can achieve the same performance as something like linux pipes. I'm curious what people would suggest for a multi-reader solution to something like this? Is the overhead for pipes or domain sockets low enough that I could just open a connection to each reader and issue separate writes to each reader? This is intended to be significant volumes of data (tens of mega-samples/sec), so performance is a must.

  Read the article

• camera picturecallback intent not work

  - by Simon

  After I take the photo, the program automatically goes back like onBackPressed(). When I remove the putExtra, the intent runs. When I put startActivity() after takePicture(), it transfers null data.... I just want to put the image data to another activity to have other use. How can it be achieved? private PictureCallback picture = new PictureCallback(){ @Override public void onPictureTaken(byte[] data, Camera camera) { // TODO Auto-generated method stub Intent intent = new Intent(CameraFilming.this, PhotoPreview.class); intent.putExtra("imageByte", data); //Picture data transfer to next activity startActivity(intent); } }; //take photo by pressing button private class captureBtnListener implements View.OnClickListener{ @Override public void onClick(View v){ capture.setOnClickListener(null); CountDownTimer timer = new CountDownTimer(10000, 1000){ @Override public void onTick(long millisUntilFinished) { // TODO Auto-generated method stub countdown.setText(millisUntilFinished/1000+""); } @Override public void onFinish() { // TODO Auto-generated method stub countdown.setText("0"); camera.takePicture(null, null, picture); } }; timer.start(); } } public class PhotoPreview extends Activity{ private RelativeLayout layout; private ImageView overlay, texture, face1, face2; @Override public void onCreate (Bundle savedInstanceState){ super.onCreate(savedInstanceState); setContentView(R.layout.photo_preview); layout = (RelativeLayout)findViewById(R.id.preview_layout); byte[] data = getIntent().getByteArrayExtra("imageByte"); if (data == null){ Log.d("PhotoPreview", "no image data"); finish(); } Bitmap rawPhotoBitmap = BitmapFactory.decodeByteArray(data, 0, data.length); ImageProcess imgProcess = new ImageProcess(this); Bitmap resizedFace = imgProcess.scaleAccordingWidth(imgProcess.cropImage(rawPhotoBitmap, 840, 125, 440, 560), 77); face1 = new ImageView(this); face1.setImageBitmap(resizedFace); Log.d("testing", "testing"); } }

  Read the article

• Is memory allocation in linux non-blocking?

  - by Mark

  I am curious to know if the allocating memory using a default new operator is a non-blocking operation. e.g. struct Node { int a,b; }; ... Node foo = new Node(); If multiple threads tried to create a new Node and if one of them was suspended by the OS in the middle of allocation, would it block other threads from making progress? The reason why I ask is because I had a concurrent data structure that created new nodes. I then modified the algorithm to recycle the nodes. The throughput performance of the two algorithms was virtually identical on a 24 core machine. However, I then created an interference program that ran on all the system cores in order to create as much OS pre-emption as possible. The throughput performance of the algorithm that created new nodes decreased by a factor of 5 relative the the algorithm that recycled nodes. I'm curious to know why this would occur. Thanks. *Edit : pointing me to the code for the c++ memory allocator for linux would be helpful as well. I tried looking before posting this question, but had trouble finding it.

  Read the article

• HTML relative links with URL Rewrite

  - by Adam Kiss

  I have quickie: When you code/develop themes, how do you link to various files in your html/css code? Example: We at our firm use mostly <base target="http://whatever"> in our main template and then just <img src="./images/file.png"> in our html, "/category/page" as links and something alike in our css. However, when testing on different machines, we use ip address rather than localhost on main dev station of coder, so all base links don't work (because localhost goes to viewing machine, not coder's, in our network). Same thing happens when updating pages - on dev server, we have to edit base target, so browsing site won't take us to live site - this part is actually rather simple PHP (if ... echo else echo something else), but it still not solve problem of more coding-testing problems. So, my question is, how do YOU solve it? How do you use relative links, which basically don't care for what domain is the page on and don't care for url rewrite? (because ../images/ is different for / and different for /something/somethingElse/page)?

  Read the article

• PHP mail() function not delivering mail

  - by Ryan Jones

  Hi there, I have a slight problem. I am using a working script (works on my testing account - shared server) to send a mail through PHP using the mail() function. I just got a dedicated server, and I haven't been able to get the function to work. I've spent the last 10 or so hours reading various documentations on BIND (for the SPF record), dovecot, sendmail and postfix trying various things to get this to work. There is clearly something that I am missing. So we know the PHP code works fine. All the headers are fine everything. We know this as it's a direct copy from my testing account. So the problem must arise somewhere in the server config. The path to sendmail is correct, and sendmail is (apparently) working fine. I've set up the script to now deliver "Sent" or "Error" based on the boolean result from the PHP mail() function. That is: if(mail($blah,$blah,$blah,$blah,$blah)) { echo "Sent"; } else { echo "Error";} And the result ALWAYS comes up as "Sent" - however, the email never arrives. Can someone suggest things to check, as I'm completely new to this (24 hours or so!). Thanks in advance. Ryan

  Read the article

• Memcache error: Failed reading line from stream (0) Array

  - by daviddripps

  I get some variation of the following error when our server gets put under any significant load. I've Googled for hours about it and tried everything (including upgrading to the latest versions and clean installs). I've read all the posts about it here on SA, but can't figure it out. A lot of people are having the same problem, but no one seems to have a definitive answer. Any help would be greatly appreciated. Thanks in advance. Fatal error: Uncaught exception 'Zend_Session_Exception' with message 'Zend_Session::start() - /var/www/trunk/library/Zend/Cache/Backend/Memcached.php(Line:180): Error #8 Memcache::get() [memcache.get]: Server localhost (tcp 11211) failed with: Failed reading line from stream (0) Array We have a copy of our production environment for testing and everything works great until we start load-testing. I think the biggest object stored is about 170KB, but it will probably be about 500KB when all is said and done (well below the 1MB limit). Just FYI: Memcache gets hit about 10-20 times per page load. Here's the memcached settings: PORT="11211" USER="memcached" MAXCONN="1024" CACHESIZE="64" OPTIONS="" I'm running Memcache 1.4.5 with version 2.2.6 of the PHP-memcache module. PHP is version 5.2.6. memcache details from php -i: memcache memcache support = enabled Active persistent connections = 0 Version = 2.2.6 Revision = $Revision: 303962 $ Directive = Local Value = Master Value memcache.allow_failover = 1 = 1 memcache.chunk_size = 8192 = 8192 memcache.default_port = 11211 = 11211 memcache.default_timeout_ms = 1000 = 1000 memcache.hash_function = crc32 = crc32 memcache.hash_strategy = standard = standard memcache.max_failover_attempts = 20 = 20 Thanks everyone

  Read the article

• Partitioning data set in r based on multiple classes of observations

  - by Danny

  I'm trying to partition a data set that I have in R, 2/3 for training and 1/3 for testing. I have one classification variable, and seven numerical variables. Each observation is classified as either A, B, C, or D. For simplicity's sake, let's say that the classification variable, cl, is A for the first 100 observations, B for observations 101 to 200, C till 300, and D till 400. I'm trying to get a partition that has 2/3 of the observations for each of A, B, C, and D (as opposed to simply getting 2/3 of the observations for the entire data set since it will likely not have equal amounts of each classification). When I try to sample from a subset of the data, such as sample(subset(data, cl=='A')), the columns are reordered instead of the rows. To summarize, my goal is to have 67 random observations from each of A, B, C, and D as my training data, and store the remaining 33 observations for each of A, B, C, and D as testing data. I have found a very similar question to mine, but it did not factor in multiple variables. I feel silly asking this question because it seems so simple, but I'm stumped. Also, this is my first question on this site, so I apologize in advance for any faux pas on my part.

  Read the article

• ASP.NET - Accessing copied content

  - by James Kolpack

  I have a class library project which contains some content files configured with the "Copy if newer" copy build action. This results in the files being copied to a folder under ...\bin\ for every project in the solution. In this same solution, I've got a ASP.NET web project (which is MVC, by the way). In the library I have a static constructor load the files into data structures accessible by the web project. Previously I've been including the content as an embedded resource. I now need to be able to replace them without recompiling. I want to access the data in three different contexts: Unit testing the library assembly Debugging the web application Hosting the site in IIS For unit testing, Environment.CurrentDirectory points to a path containing the copied content. When debugging however, it points to C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE. I've also looked at Assembly.GetExecutingAssembly().Location which points to C:\Windows\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\root\c44f9da4\9238ccc\assembly\dl3\eb4c23b4\9bd39460_f7d4ca01\. What I need is to the physical location of the webroot \bin folder, but since I'm in a static constructor in the library project, I don't have access to a Request.PhysicalApplicationPath. Is there some other environment variable or structure where I can always find my "Copy if newer" files?

  Read the article

• Export large amount of data from Oracle 10G to SQL Server 2005

  - by uniball

  Dear all, I need to export 100 million data rows (avg row length ~ 100 bytes) from Oracle 10G database table into SQL server (over WAN/VLAN with 6MBits/sec capacity) on a regular basis. So far, these are the options that I have tried and a quick summary. Has anyone tried this before? Are there other better options? Which option would be the best in terms of performance and reliability? The time taken has been calculated using tests on smaller amounts of data and then extrapolating it to estimate the time required. Using data import wizard on the SQL server or SSIS packages to import the data. It will take around 150 hours to complete the task. Using Oracle batch job to spool data into a comma-delimited flat-file. Then using SSIS package to FTP this file to the SQL server and then load directly from the flat-file. The issue here is the size of the flat-file which is expected to run in GBs. Although this option is drastically different, I am even considering the option of using Linked Server to query the Oracle data directly at run-time to avoid bringing in data. Performance is a big problem and I have limited control over the Oracle database in terms of creating table indexes. Regards, Uniball

  Read the article

• Speed of QHash lookups using QStrings as keys.

  - by Ryan R.

  I need to draw a dynamic overlay on a QImage. The component parts of the overlay are defined in XML and parsed out to a QHash<QString, QPicture> where the QString is the name (such as "crosshairs") and the QPicture is the resolution independent drawing. I then draw components of the overlay as they are needed at a position determined during runtime. Example: I have 10 pictures in my QHash composing every possible element in a HUD. During a particular frame of video I need to draw 6 of them at different positions on the image. During the next frame something has changed and now I only need to draw 4 of them but 2 of those positions have changed. Now to my question: If I am trying to do this quickly, should I redefine my QHash as QHash<int, QPicture> and enumerate the keys to counteract the overhead caused by string comparisons; or are the comparisons not going to make a very big impact on performance? I can easily make the conversion to integer keys as the XML parser and overlay composer are completely separate classes; but I would like to use a consistent data structure across the application. Should I overcome my desire for consistency and re-usability in order to increase performance? Will it even matter very much if I do?

  Read the article

• Function Returning Negative Value

  - by Geowil

  I still have not run it through enough tests however for some reason, using certain non-negative values, this function will sometimes pass back a negative value. I have done a lot of manual testing in calculator with different values but I have yet to have it display this same behavior. I was wondering if someone would take a look at see if I am missing something. float calcPop(int popRand1, int popRand2, int popRand3, float pERand, float pSRand) { return ((((((23000 * popRand1) * popRand2) * pERand) * pSRand) * popRand3) / 8); } The variables are all contain randomly generated values: popRand1: between 1 and 30 popRand2: between 10 and 30 popRand3: between 50 and 100 pSRand: between 1 and 1000 pERand: between 1.0f and 5500.0f which is then multiplied by 0.001f before being passed to the function above Edit: Alright so after following the execution a bit more closely it is not the fault of this function directly. It produces an infinitely positive float which then flips negative when I use this code later on: pPMax = (int)pPStore; pPStore is a float that holds popCalc's return. So the question now is, how do I stop the formula from doing this? Testing even with very high values in Calculator has never displayed this behavior. Is there something in how the compiler processes the order of operations that is causing this or are my values simply just going too high? If the later I could just increase the division to 16 I think.

  Read the article

< Previous Page | 416 417 418 419 420 421 422 423 424 425 426 427  | Next Page >