Search Results

Search found 24646 results on 986 pages for 'linux vserver'.

Page 421/986 | < Previous Page | 417 418 419 420 421 422 423 424 425 426 427 428  | Next Page >

• NFS host is not exporting the "share"

  - by user1345260

  I have a NFS Server: usanfsd01 And a remote machine: usafssd01 I tried mounting a directory from usafssd01 onto usanfsd01 by adding the following line to /etc/fstab as root usanfsdo1:/home/dblogs /home/data/dblogs nfs rw 0 0 And when I run the following command to see if NFS is exporting the share, it's not shown showmount -e usanfsdo1 Can someone please help? Also, a point of interest would be there is another mount that works on the same servers and thats defined as below in the /etc/fstab usanfsdo1:/home/files /home/data/files nfs rw 0 0 /etc/exports /nfs/home/dblogs 'IPADDRESS'(rw,no_root_squash)

  Read the article

• How to make a non-root user to use chown for any user group files?

  - by user1877716

  I would like to make a user super powerful, with almost all root rights but unable to touch a the root user (to change the password of the root). My goal is to user "B" to manage my web server. The problem is user B need to able to run the chown and chmod commands on some files belonging to other users. I tried to put B in root group or use visudo, but it's not enough. I'm working an Centos 6 system. If some body have ideas!

  Read the article

• Lost Root and other user passwords

  - by Webnet

  This isn't a huge deal, because there's very little on the server (literally a file or two) that we actually need off of it. But we disabled root logins as a security measure and can't remember any of our other user passwords. I'm assuming that there's nothing we can do at this point to get into the server? I'm sitting next to the box... Update Oops... actually, I need to export an SVN off of this server. So yeah, there's stuff I need.

  Read the article

• Use both OpenVPN & eth0 together

  - by shadyabhi

  I connect to a VPN using openVPN. Now, after the connection is established, all my traffic goes through tun0. My LAN gateway is 10.100.98.4... So, for apps to use my direct internet connnection I did sudo route add default gw 10.100.98.4 But, I cant use tun0 now. I know this because curl --interface tun0 google.com doesnt give me anything.. How do I go about using both connections simultaneously. How can I achieve that? ROUTING TABLES:- Without VPN running:- Destination Gateway Genmask Flags Metric Ref Use Iface 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 default 10.100.98.4 0.0.0.0 UG 0 0 0 eth0 With VPN:- Destination Gateway Genmask Flags Metric Ref Use Iface 10.10.0.1 10.10.54.230 255.255.255.255 UGH 0 0 0 tun0 10.10.54.230 * 255.255.255.255 UH 0 0 0 tun0 free-vpn.torvpn 10.100.98.4 255.255.255.255 UGH 0 0 0 eth0 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 default 10.10.54.230 0.0.0.0 UG 0 0 0 tun0 After the route command- Destination Gateway Genmask Flags Metric Ref Use Iface 10.10.0.1 10.10.54.230 255.255.255.255 UGH 0 0 0 tun0 10.10.54.230 * 255.255.255.255 UH 0 0 0 tun0 free-vpn.torvpn 10.100.98.4 255.255.255.255 UGH 0 0 0 eth0 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 default 10.100.98.4 0.0.0.0 UG 0 0 0 eth0 default 10.10.54.230 0.0.0.0 UG 0 0 0 tun0

  Read the article

• rdisk value in boot.ini maps to which disk?

  - by MA1

  Hi All Following are the contents of a sample boot.ini: [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /NOEXECUTE=OPTIN /FASTDETECT multi(0)disk(0)rdisk(0)partition(2)\WINNT="Windows 2000 Professional" /fastdetect multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /NOEXECUTE=OPTIN /FASTDETECT rdisk value tells the physical disk number. so, if i have three hard disks say: /dev/sda /dev/sdb /dev/sdc than how to know which disk(/dev/sda or /dev/sdb or /dev/sdc) is rdisk(0) and which disk is rdisk(1) etc Regards,

  Read the article

• How to use grep to search for multiple options

  - by michael

  Hi, How can I use grep to search for line with either 'res' or 'rep'? i try "grep -e res|rep" or gre -e "rep|rep" but that does not work.

  Read the article

• Determine Configured Location of MySQL's data directory OR all loaded *.cfn Locations

  - by alanstorm

  I'm not a sys-admin, but sometimes I play one at work. I've inherited a virtual server that had MySQL installed from source. I'm gathering as much information about the install as I can (original people who installed it are, of course, not a resource). How can I find The default/current location of the MySQL binary files (often stored in a directory named data?) Any default or custom loaded cnf files? Looking for solutions that are a bit more sophisticated than a find / -iname '*.cnf' :)

  Read the article

• stat and ls show wrong file size (terabytes wrong)

  - by WolleTD

  Ok, I have a bunch of vCard files, all about 200 to 300 Bytes in size. While trying to get them archived, I wondered why that takes so long and discovered that there is one file with a wrong size. Both ls and stat are showing a size of about 8.1 Terabytes. That's amazing because my SSD is only about 250 Gigabytes in size. There are some other files with wrong sizes, too, but this is clearly the biggest one. I already gave it a fsck, but there seem to be no errors in the (ext4) filesystem. How can I get rid of this wrong size? Thanks, Wolle

  Read the article

• How may I start a process without having network access and later allow network access?

  - by Eduardo

  I want to run a process without network access but at a later time give access to the network.

  Read the article

• Remote file copy util (like rsync) but that will take account of data already copied (in this sessio

  - by Rory McCann

  Let's say I have a directory with 2 files, both are identical and quite large (e.g. 2GB ea.) I want to rsync that directory to a remote host. As I understand it (and I could be wrong), rsync calculates checksums of files. Surely if it sees 2 files with the same checksum it can just copy the first file, then do a local copy on the remote host for the 2nd file? That would make it faster, no? On a similar note, doesn't rsync hash all the remote files before copying? If it saw a different file with the same hash as a file that was to transfered, it could do a local copy on the remote host. Does rsync support this sort of thing? Is there some way to turn it on? Is there a tool similar to rsync that will do this sort of 'hash based' local copies?

  Read the article

• XenServer 5.6.1-fp1. Can't get network working

  - by casey_miller

  I have a PC where XenServer 5.6.1 fp-1 has been successfully installed. I've manually set the network settings: 192.168.1.50 255.255.255.0 192.168.1.1 but it's set to xenbr0 iface. While eth0 is empty. When I click on "Configure Management Inteface" it shows that eth0 is connected. But when I ping a default gateway (which is 100% should be accessible) it fails. I used to another shell (Alt+F3) and logged as root. I also failed to ping. with both: ping -I eth0 192.168.1.1 and ping -I xenbr0 192.168.1.1 Be assured that: Cable works Ethernet adapter is 100% functional (prev OS was Ubuntu it was working) There is no firewall rule to deny anything. (everything is allowed) So the question is: What is a problem???

  Read the article

• eAccelerator problems. Please help

  - by Hakzona

  I just recently installed eaccelerator and switched php to dso everything was fine on server Server load was about 1-2 (4 cpus) and after some time server got overloaded (Server load increased to 250) and server stopped. In suphp mode server was overloading by traffic so i decided to switch it to eaccelerator and now i am lost... Can someone explain that?

  Read the article

• A way to auto cycle (close) through all screen sessions

  - by JBWhitmore

  I frequently use screen when I log into the interactive nodes to a supercomputer that I have access to -- and I often run things and move on. There are about 20 separate nodes that I can log into; and if I check any one of them I'll have something like 4 detached sessions. Each of those sessions will have maybe 5 screen sessions within that. Is there a quick way to cycle through all of these and close them down if they are not running any processes? My current process is to screen -ls and then screen -r #### then type exit until I'm back to the base screen.

  Read the article

• Configure New Server for .htaccess

  - by Phil T

  I have a new LAMP CENTOS 5 server I am setting up and trying to copy the configuration from another web server I have. I am stuck with what I think is a mod_rewrite problem. If I go to http://old-server.com/any_page_name.php it correctly routes through some handling code in index.php and shows me a graceful "Page Cannot Be Displayed" message. But if I go to http://new-server.com/any_page_name.php I get an ugly Apache 404 Not Found error message. I looked in both httpd.conf files and they both have only one reference to mod_rewrite. LoadModule rewrite_module modules/mod_rewrite.so So it seems like that should be fine. At the bottom of httpd.conf I have the code: <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html ServerName new-server.com ErrorLog logs/new-server.com-error_log CustomLog logs/new-server.com-access_log common </VirtualHost> Then in the root of /var/www/html I have the exact same .htaccess file that looks like this: RewriteEngine on Options +FollowSymlinks RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . index.php [L] ErrorDocument 404 /page-unavailable/ <files ~ "\.tpl$"> order deny,allow allow from none deny from all </files> So I don't see why the page load at old-server.com works fine while new-server.com doesn't route through index.php like I want it to do. Thanks.

  Read the article

• slow software raid

  - by Jure1873

  I've got software raid 1 for / and /home and it seems I'm not getting the right speed out of it. Reading from md0 I get around 100 MB/sec Reading from sda or sdb I get around 95-105 MB/sec I thought I would get more speed (while reading data) from two drives. I don't know what is the problem. I'm using kernel 2.6.31-18 hdparm -tT /dev/md0 /dev/md0: Timing cached reads: 2078 MB in 2.00 seconds = 1039.72 MB/sec Timing buffered disk reads: 304 MB in 3.01 seconds = 100.96 MB/sec hdparm -tT /dev/sda /dev/sda: Timing cached reads: 2084 MB in 2.00 seconds = 1041.93 MB/sec Timing buffered disk reads: 316 MB in 3.02 seconds = 104.77 MB/sec hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 2150 MB in 2.00 seconds = 1075.94 MB/sec Timing buffered disk reads: 302 MB in 3.01 seconds = 100.47 MB/sec Edit: Raid 1

  Read the article

• How to configure sendmail to relay through a specific server

  - by ErebusBat

  I have a tiny home server setup behind my cable modem (bresnan communications). I want to be able for this box to send out email (not receive) for notifications and whatnot. What I have already done: I have installed and configured sendmail. I have added mail.bresnan.net as my SMART_HOST directive. What I belive the problem is When I attempt to send an email I get the following in my mail log: Dec 22 10:24:17 batcave sendmail[1530]: oBMHOHrs001530: from=aburns, size=140, class=0, nrcpts=1, msgid=<[email protected]>, relay=aburns@localhost Dec 22 10:24:17 batcave sm-mta[1531]: oBMHOHWZ001531: from=<[email protected]>, size=397, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Dec 22 10:24:17 batcave sendmail[1530]: oBMHOHrs001530: to=<[email protected]>, ctladdr=aburns (1000/1000), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30140, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (oBMHOHWZ001531 Message accepted for delivery) Dec 22 10:24:18 batcave sm-mta[1517]: oBMH9mVv001357: to=<[email protected]>, ctladdr=<[email protected]> (1000/1000), delay=00:14:30, xdelay=00:00:42, mailer=relay, pri=300339, relay=pmx0.bresnan.net. [69.145.248.1], dsn=4.0.0, stat=Deferred: Connection timed out with pmx0.bresnan.net. You can see where the message is accepted for delivery by my sendmail server, then where it attempts to hand off to bresnan's server and it timesout. This is where my question is. Asstute readers will notice that pmx0.bresnan.net is not what I have my SMART_HOST directive set as. This is the (outside?) MX server for the bresnan.com/net domain. Apparently bresnan has their network configured so that you can not access this server from within their own network and instead must use the mail.bresnan.net server (which I can connect to). The problem is that I don't know how to tell sendmail to use this server and not the domain. What I have tried Setting a hosts entry so that the pmx0 server points to the mail IP address. This doesn't work, which makes sense as sendmail is obviously doing an MX query to find the server which returns the IP so there is never a need to do a 'normal' DNS resolve so the hosts file never gets involved.

  Read the article

• Linux : Ubuntu n'est plus la distribution la plus populaire d'après DistroWatch, la faute à Unity ? Montée fulgurante de Mint

  Linux : Ubuntu n'est plus la distribution la plus populaire d'après DistroWatch La faute à Unity ? Montée fulgurante pour Mint La distribution Linux Ubuntu perd du terrain selon le rapport annuel de DistroWatch mis à jour cette semaine. Sur les 12 derniers mois, c'est Mint Linux qui domine le tableau des distributions les plus populaires. Ubuntu y arrive deuxième, mais son déclin s'accélère au dernier mois pour se classer quatrième derrière Fedora,

  Read the article

• SVN - Server sent unexpected return value (500 Internal Server Error)

  - by person

  I'm using RabbitVCS to work with Google Code, and I just recently started having problems with trying to commit. Whenever I try to commit, it says... Commit failed Server sent unexpected return value (500 Internal Server Error) in response to Checkout request for (some file that is involved in the commit. The file it fails on isn't consistent). I have no idea what is wrong, any help is appreciated, thanks.

  Read the article

• Why do certain replied emails missing threading when replied back in Mutt?

  - by yarun can

  I use Mutt for emails. I have threads enabled and I can see that most of the emails are threaded in Mutt. So that is all good. But sometimes I reply to an email and the answer(from other person) to my replied email wont be part of any threads. The thing is that when I reply in Mutt (which I use Vim to edit them), the subject parts keeps getting longer and longer with many "Re"s. That is the case with those emails with missing threads. I have: set strict_threads="yes" set sort="threads" set edit_headers=yes I am wondering if this has anything to do with Mutt or the person I am communicating over email. Could this one be the culprit? set metoo=yes Any suggestions?

  Read the article

• I have a perl script that is supposed to run indefinitely. It's being killed... how do I determine who or what kills it?

  - by John O

  I run the perl script in screen (I can log in and check debug output). Nothing in the logic of the script should be capable of killing it quite this dead. I'm one of only two people with access to the server, and the other guy swears that it isn't him (and we both have quite a bit of money riding on it continuing to run without a hitch). I have no reason to believe that some hacker has managed to get a shell or anything like that. I have very little reason to suspect the admins of the host operation (bandwidth/cpu-wise, this script is pretty lightweight). Screen continues to run, but at the end of the output of the perl script I see "Killed" and it has dropped back to a prompt. How do I go about testing what is whacking the damn thing? I've checked crontab, nothing in there that would kill random/non-random processes. Nothing in any of the log files gives any hint. It will run from 2 to 8 hours, it would seem (and on my mac at home, it will run well over 24 hours without a problem). The server is running Ubuntu version something or other, I can look that up if it matters.

  Read the article

• Primary/secondary ethernet interfaces in Ubuntu 9.10

  - by Josh

  I have an Ubuntu 9.10 machine with three ethernet interfaces, eth0, eth1 and eth2. eth2 is connected to a private network. eth0 and eth2 are connected to two different LANs. Either one will provide access to the internet. All three networks have DHCP servers. Using Ubuntu's the default settings (And Gnome), when I boot up all the interfaces are active and my system gets three IP addresses. However any attempt to access the internet results in connection timeouts and other weirdness. I suspect that traffic is going out on one NIC (like eth0) and coming back in on another (like eth1). I'm not sure what's going on. The only way I can access the internet at the moment is to bring two of the devices down with ifdown. How can I configure eth0 as my primary interface so all trafic goes out by default on that interface, while keeping the other two active? Also, I want to make sure Avahi broadcasts properly on all three IPs so that the computers on the LAN of eth1 can still connect to myHostname.local...

  Read the article

• How can I measure TCP timeout limit on NAT firewall for setting keepalive interval?

  - by jmanning2k

  A new (NAT) firewall appliance was recently installed at $WORK. Since then, I'm getting many network timeouts and interruptions, especially for operations which would require the server to think for a bit without a response (svn update, rsync, etc.). Inbound SSH sessions over VPN also timeout frequently. That clearly suggests I need to adjust the TCP (and ssh) keepalive time on the servers in question in order to reduce these errors. But what is the appropriate value I should use? Assuming I have machines on both sides of the firewall between which I can make a connection, is there a way to measure what the time limit on TCP connections might be for this firewall? In theory, I would send a packet with gradually increasing intervals until the connection is lost. Any tools that might help (free or open source would be best, but I'm open to other suggestions)? The appliance is not under my control, so I can't just get the value, though I am attempting to ask what it currently is and if I can get it increased.

  Read the article

• PHP unable to allocate memory.

  - by AlReece45

  On my way to the office this morning, every website on our shared VPS started giving the same error (several times, not the typical memory_limit error which is fatal): Warning: Unknown: Unable to allocate memory for pool. in Unknown on line 0 The shared server is a 64-bit OpenVZ container running cPanel. There are only ~6 VPSes on the host-- this is the largest one at only 4GB. The host itself has 24GB RAM. As the below graphs show, the memory usage on the host and VPS are both rather low. CPU Usage/Disk/Host all seem to be normal. RlimitMem was set to 583653034, yet the memory usage is about the same as it usually is. Apache 2.2, PHP 5.2 (mod_php) Restarting Apache has corrected the problem for now. However, I'd like to prevent it from happening again and I'm not sure what was limiting the memory. RlimitMem was set to 583653034, yet the memory usage is about the same as it usually is. There's seems to be plenty of memory: what caused this error? VPS Memory Usage Host Memory Usage APC Information apc.ttl=0 apc.shm_size=0 apc.mmap_file_mask=(blank) 1 Segment(s) with 32.0 MBytes (mmap memory, pthread mutex locking)

  Read the article

• VFS and FS i-node difference

  - by gaffcz

  What is the difference between VFS i-node and FS (e.g. EXT) i-node? Is it possible that EXT i-node is persistent (contains/points to data blocks), but VFS i-node is created just in i-node cache after read/use of EXT i-node? Or the VFS i-node is just an image of FS i-node (it's the same) and i-nodes in those systems, which are not working with i-nodes (e.g. FAT, NTFS) has to be emulated (HOW?) to allow VFS work with those FS like they would support i-nodes?

  Read the article

• Debian Wheezy: installing from sources or repositories? upgrading to new software release?

  - by user269842

  a. I'm wondering for some software if it is wiser to install them from sources or from official repositories when available like: glpi inventory fusion inventory monitoring tools like nagios I tried both for glpi: compiled from sources and installing from repositories. I also installed zabbix from sources. b. What about new software releases providing enhancements: is it better to keep the release installed from the repositories /compiled or is their a 'best practice' like downloading the new software release and compiling it again (I really have no clue)? Could someone make it more clear for me? Thanks!

  Read the article

< Previous Page | 417 418 419 420 421 422 423 424 425 426 427 428  | Next Page >