Search Results

Search found 12283 results on 492 pages for 'tcp port'.

Page 423/492 | < Previous Page | 419 420 421 422 423 424 425 426 427 428 429 430  | Next Page >

• Why does my DD-WRT not accept SSH connections from my laptop?

  - by Vlad Seghete

  So, here is my system: I have a 2Wire AT&T modem/router which I use for wireless and a Buffalo router flashed with DD-WRT which is physically attached to the 2Wire and set in the DMZ. I set everything up on the DD-WRT to be able to connect to it using ssh and also so that it forwards ssh requests on a different port to one of the servers behind it. Now, when I am physically connected to the DD-WRT all this works great and as I would want it to. I ssh into the two different ports using the WAN IP of my network, and I get where I expect to land. If, however, I am connected using wi-fi to the 2Wire, the same commands do not work. I do not get an error, simply a timeout. I have trouble understanding this, since the DD-WRT is set in the DMZ and everything should pass to it. To further complicate the problem, I tried connecting to the same IP using my phone (wireless disabled, so really from the WAN) and surprise, it works! If I go back on the local network by enabling the wifi, the ssh connection times out. To make this even stranger, my WAN IP address always responds to pings (meaning in all the above situations). What could be going on here? I know what I should do, completely disable the 2wire as a router and use it strictly as a modem and them use all the routing capabilities of the dd-wrt. It's what I will probably end up doing anyway, but my question remains, because I really want to know what is happening here.

  Read the article

• Why am I getting this error in the logs?

  - by Matt

  Ok so I just started a new ubuntu server 11.10 and i added the vhost and all seems ok ...I also restarted apache but when i visit the browser i get a blank page the server ip is http://23.21.197.126/ but when i tail the log tail -f /var/log/apache2/error.log [Wed Feb 01 02:19:20 2012] [error] [client 208.104.53.51] File does not exist: /etc/apache2/htdocs [Wed Feb 01 02:19:24 2012] [error] [client 208.104.53.51] File does not exist: /etc/apache2/htdocs but my only file in sites-enabled is this <VirtualHost 23.21.197.126:80> ServerAdmin [email protected] ServerName logicxl.com # ServerAlias DocumentRoot /srv/crm/current/public ErrorLog /srv/crm/logs/error.log <Directory "/srv/crm/current/public"> Order allow,deny Allow from all </Directory> </VirtualHost> is there something i am missing .....the document root should be /srv/crm/current/public and not /etc/apache2/htdocs as the error suggests Any ideas on how to fix this UPDATE sudo apache2ctl -S VirtualHost configuration: 23.21.197.126:80 is a NameVirtualHost default server logicxl.com (/etc/apache2/sites-enabled/crm:1) port 80 namevhost logicxl.com (/etc/apache2/sites-enabled/crm:1) Syntax OK UPDATE <VirtualHost *:80> ServerAdmin [email protected] ServerName logicxl.com DocumentRoot /srv/crm/current/public <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /srv/crm/current/public/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost>

  Read the article

• Docking Station Sound Doesn't Work on Dell D830 with Windows 7

  - by cisellis

  I have a Dell Latitude D830 laptop that is running Windows 7 Enterprise x64. I connect to a docking station during the day with multiple monitors, a keyboard and a mouse. Everything runs with no problems including most of the docking station ports (usb, monitors, etc.) However, the sound port from the docking station does not work since the upgrade to Windows-7. Even with the laptop plugged in, the sound always comes out of the laptop, not the headphones plugged into the docking station. Here's what I've tried: I've seen other issues like via Google this that seem to be mostly unanswered. I found one or two that referenced using the Vista x64 drivers, especially the Nvidia drivers. I do not have an Nvidia chipset but I've reinstalled the sound drivers and that has not helped. I don't have a support contract and considering the cost is usually high to call Dell, that's not an option. Dell's forums are pretty much a wasteland and I've found no help there. Since this is a docking station I thought I might need to try the SATA or Intel chipset drivers from the dell site instead, however I'm not really sure and I need to work on this laptop in the meantime. I can't really afford the downtime to experiment with random drivers all day in case they turn out to be incompatible (Dell still hasn't added Windows 7 to their support site as far as I can tell). Does anyone have any other ideas? Has anyone had this issue and solved it? If so, how? Thanks in advance for your help.

  Read the article

• Firefox will not remember local site cookie

  - by Campo

  This is a weird one. We have a production server (Server 2008) and two staging servers (Server 2008 and Server 2003) I have sites on all of these. They all use cookies. On the Production server when browsing to our site www.supernovainteractive.com there is a cookie that detects when you visted the site and it will not refresh the logo animation (top left hand side) on clicking to another page. This works for all browsers on the production server. I’m not sure what’s going on but for some reason cookies are not working on one site in the 2008 staging server only. This is when browsing using Firefox (3.6.3) they work fine on all other browsers (IE, Chrome, Safari, Opera) In addition, the 2003 staging server works fine. You can test on the Supernova Interactive site by noticing the logo in the top left corner. It uses a cookie to detect if you’ve already seen the animation. Once you’ve seen it once, it doesn’t animate again until tomorrow. Currently, it’s animating every time. I have opened an outside facing port so others can see the issue. Http://exchange.supernova.com:10009 Any ideas on this one? Firewalls are off on the server. Notice you do not get a cookie from Exchange.supernova.com.

  Read the article

• Prevent SSL certificate being returned for a specific domain

  - by jezmck

  Apologies for a long question: We've taken on a new client whose web hosting was previously on their in-house server which still has their Exchange/Outlook email. We now host their domain (and many others) on our server. They're complaining that they're getting errors in Outlook. I don't understand the AutoDiscover stuff at the root of the problem, but believe that I just need to stop the SSL certificate on our server being returned when requested at a particular domain: Yes it is, the issue lies with "{newclient}.com" being pointed to your server IP and that server has Port 443 open with an SSL certificate associated to it. So when Outlook/ActiveSync use autodiscover to find the mailbox settings it find your SSL (because 443 is open) and flags it as an error. The solution is to close 443 so its not discovered, Autodiscover will then proceed to mail.{newclient}.com via the MX / ServiceRecords and discover the correct SSL. I'm new here and there was no hand-over, so I don't know whether other currently hosted sites need to accept SSL connections, though I suspect some will, or may in future. This is a live server, so I can't risk trying loads of options in case I take the server offline! I feel like I should be adding something like the following to vhosts.conf. <VirtualHost *:443> ServerName {newclient}.com ServerAlias www.{newclient}.com SSLEngine Off SSLCertificateFile {NONE} SSLCertificateKeyFile {NONE} </VirtualHost> Apologies for the fact that I don't know enough about this subject to be able to ask the question more clearly!

  Read the article

• Solr startup script problem

  - by Camran

  I have installed solr and it works finally... I have now problems setting it up to start automatically with a start command. I have followed a tutorial and created a file called solr in the /etc/init.d/solr dir... Here is that file: #!/bin/sh -e # SOLR auto-start # # description: auto-starts solr engine # processname: solr-production # pidfile: /var/run/solr-production.pid NAME="solr" PIDFILE="/var/run/solr-production.pid" LOG_FILE="/var/log/solr-production.log" SOLR_DIR="/etc/jetty" JAVA_OPTIONS="-Xmx1024m -DSTOP.PORT=8079 -DSTOP.KEY=stopkey -jar start.jar" JAVA="/usr/bin/java" start() { echo -n "Starting $NAME... " if [ -f $PIDFILE ]; then echo "is already running!" else cd $SOLR_DIR $JAVA $JAVA_OPTIONS 2> $LOG_FILE & sleep 2 echo `ps -ef | grep -v grep | grep java | awk '{print $2}'` > $PIDFILE echo "(Done)" fi return 0 } stop() { echo -n "Stopping $NAME... " if [ -f $PIDFILE ]; then cd $SOLR_DIR $JAVA $JAVA_OPTIONS --stop sleep 2 rm $PIDFILE echo "(Done)" else echo "can not stop, it is not running!" fi return 0 } case "$1" in start) start ;; stop) stop ;; restart) stop sleep 5 start ;; *) echo "Usage: $0 (start | stop | restart)" exit 1 ;; esac Whenever I do solr -start I get this error: "Error occurred during initialization of VM Could not reserve enough space for object heap" I think this is because of the file above... Also here is where I have solr installed: var/www/solr and here is the start.jar file located: var/www/start.jar Help me out if you know whats causing this. Thanks BTW: OS is ubuntu 9.10

  Read the article

• How can I update generic non-pnp monitor?

  - by njk

  Background I've been running a KVM switch with my monitor at 1920 x 1080 over VGA for over a year. Did a Windows Update on 12/11/12 which did the following: Update for Windows 7 for x64-based Systems (KB2779562) Security Update for Windows 7 for x64-based Systems (KB2779030) Cumulative Security Update for Internet Explorer 8 for Windows 7 for x64-based Systems (KB2761465) Windows Malicious Software Removal Tool x64 - December 2012 (KB890830) Security Update for Windows 7 for x64-based Systems (KB2753842) Security Update for Windows 7 for x64-based Systems (KB2758857) Security Update for Windows 7 for x64-based Systems (KB2770660) After a restart, my extended monitor was dark. I attempted to reset the extended display configuration, and noticed my monitor was being detected as a Generic Non-PnP Monitor: I uninstalled, downloaded new, and re-installed display drivers. Nothing. I attempted to unplug my monitor from the power for 15 minutes. Nothing. I followed some of the suggestions on this thread; specifically DanM's which suggested to create a new *.inf file and replace that in Device Manager. Device Manager said the "best driver software for your device is already installed". The only thing that works is when the monitor is directly attached to the laptop. This obviously is not what I want. My thought is to somehow remove the Generic Non-PnP Monitor from registry. How would I accomplish this and would this help? Any other suggestions? Relevant Hardware ASUS VE276 Monitor TRENDnet 2-Port USB KVM Switch (TK-207K) HP Laptop w/ ATI Radeon HD 4200 Screens

  Read the article

• Diagnosing Logon Audit Failure event log entries

  - by Scott Mitchell

  I help a client manage a website that is run on a dedicated web server at a hosting company. Recently, we noticed that over the last two weeks there have been tens of thousands of Audit Failure entries in the Security Event Log with Task Category of Logon - these have been coming in about every two seconds, but interesting stopped altogether as of two days ago. In general, the event description looks like the following: An account failed to log on. Subject: Security ID: SYSTEM Account Name: ...The Hosting Account... Account Domain: ...The Domain... Logon ID: 0x3e7 Logon Type: 10 Account For Which Logon Failed: Security ID: NULL SID Account Name: david Account Domain: ...The Domain... Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x154c Caller Process Name: C:\Windows\System32\winlogon.exe Network Information: Workstation Name: ...The Domain... Source Network Address: 173.231.24.18 Source Port: 1605 The value in the Account Name field differs. Above you see "david" but there are ones with "john", "console", "sys", and even ones like "support83423" and whatnot. The Logon Type field indicates that the logon attempt was a remote interactive attempt via Terminal Services or Remote Desktop. My presumption is that these are some brute force attacks attempting to guess username/password combinations in order to log into our dedicated server. Are these presumptions correct? Are these types of attacks pretty common? Is there a way to help stop these types of attacks? We need to be able to access the desktop via Remote Desktop so simply turning off that service is not feasible. Thanks

  Read the article

• Can't Configure IBM 8275-416 Switch Via Serial

  - by Sean M

  I am attempting to configure an IBM 8275-416 switch (I found a manual here) via serial connection. However, when I connect with HyperTerminal, the output contains a lot of garbage characters. It's pretty much unusable, because there's enough layout-breaking text-gunk that it's very difficult to determine what's actually being displayed. . I was able to reset the switch to factory defaults via the terminal interface, so I know that it's not entirely broken. It also performs basic functions all right (i.e., you plug in clients and Ethernet cables - they can connect to clients plugged into other ports) - but I'd like it to do more than that (VLANs yay). I don't know if its in-band UI is operational or not, because I can't get the terminal interface to behave well enough to properly turn on the web/SNMP UI. So that's not available. Things I've tried: - Changing the encoding: HyperTerminal lets me choose between Standard JIS and Shift-JIS. Neither setting fixes the issue. - Checking emulation settings: The manual demands VT100, 19200 baud, 8 data bits, and such: I have faithfully applied these settings, both in HyperTerminal's settings and in the properties of the COM1 port in Device Manager (connecting from a Windows machine). - Restoring to factory defaults: See above. Things that it could be, but that seem unlikely: - Cabling: Couldn't find a proper null-modem cable, so used two 232-to-RJ45 adapters. But if it was a problem with the cable, wouldn't it be more likely to not connect or do input at all, rather than just garble the text? Since I was actually able to perform the reset-to-factory defaults operation, I don't think it's this. - Device as a whole broken: It is a decade and change old, so it's possible that it's just dying slowly. Again, though, it seems like there would be more symptoms than just garbled text in the terminal. What else can I try to get a sane interface to this switch?

  Read the article

• How to test nginx proxy timeouts

  - by mkorszun

  Target: I would like to test all Nginx proxy timeout parameters in very simple scenario. My first approach was to create really simple HTTP server and put some timeouts: Between listen and accept to test proxy_connect_timeout Between accept and read to test proxy_send_timeout Between read and send to test proxy_read_timeout Test: 1) Server code (python): import socket import os import time import threading def http_resp(conn): conn.send("HTTP/1.1 200 OK\r\n") conn.send("Content-Length: 0\r\n") conn.send("Content-Type: text/xml\r\n\r\n\r\n") def do(conn, addr): print 'Connected by', addr print 'Sleeping before reading data...' time.sleep(0) # Set to test proxy_send_timeout data = conn.recv(1024) print 'Sleeping before sending data...' time.sleep(0) # Set to test proxy_read_timeout http_resp(conn) print 'End of data stream, closing connection' conn.close() def main(): s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) s.bind(('', int(os.environ['PORT']))) s.listen(1) print 'Sleeping before accept...' time.sleep(130) # Set to test proxy_connect_timeout while 1: conn, addr = s.accept() t = threading.Thread(target=do, args=(conn, addr)) t.start() if __name__ == "__main__": main() 2) Nginx configuration: I have extended Nginx default configuration by setting explicitly proxy_connect_timeout and adding proxy_pass pointing to my local HTTP server: location / { proxy_pass http://localhost:8888; proxy_connect_timeout 200; } 3) Observation: proxy_connect_timeout - Even though setting it to 200s and sleeping only 130s between listen and accept Nginx returns 504 after ~60s which might be because of the default proxy_read_timeout value. I do not understand how proxy_read_timeout could affect connection at so early stage (before accept). I would expect 200 here. Please explain! proxy_send_timeout - I am not sure if my approach to test proxy_send_timeout is correct - i think i still do not understand this parameter correctly. After all, delay between accept and read does not force proxy_send_timeout. proxy_read_timeout - it seems to be pretty straightforward. Setting delay between read and write does the job. So I guess my assumptions are wrong and probably I do not understand proxy_connect and proxy_send timeouts properly. Can some explain them to me using above test if possible (or modifying if required).

  Read the article

• Tracking IP through a socks5 proxy + RDP ?

  - by piro

  Hi all. We were having some issues at work until we found that we are being attacked almost every day. The attacker seems pretty smart - at first he was always using proxy to hide his IP. With scanning I found that they were socks 5 proxy. The last week we had 11 attacks and every time i found the ip i scanned it with nmap. I found that ALL of the 11 different ip addresses were RDP (port 3389 open, and accept rdp connections, checked by myself on ALL of them). So here follow the questions: 1. Can we trace his real IP back through a socks5 proxy ? 2. Can we trace him if he is using some RDP server to hide his ip ? Please do not answer like "Call the owner of the proxy server/RDP..." etc. we already tried it and it didn't work, that's why I am writing here. Thank you very much.

  Read the article

• Where is my problem? The P6X58D Premium Mobo, Windows 7, or other?

  - by Dylan Yaga

  I was having problems with my USB devices for an hour last night, and I am unable to determine the root cause of the problem. The two symptoms are: At seemingly random times (not consistently spaced by time or caused by any detectable event) my USB devices become "detached". Windows will play the USB disconnect sound and then the reconnect sound. The devices disconnected and then reconnected. My USB Keyboard will "stick" on one key for several seconds before processing any other keystroke made. The mouse also does not respond to clicks. I do not lose mouse movement or USB device connectivity. And after a moment of this several beeps will be emitted from the speakers. Hardware Specs: GFX Card: EVGA GeForce GTX 470 Superclocked 1280MB DDR5 PCIe Motherboard: ASUS P6X58D Premium Intel X58 Socket LGA1366 MB Processor: Intel Core i7-920 2.66Ghz 8M LGA1366 CPU Memory: Corsair Dominator 6144MB PC12800 DDR3 Storage: Hitachi 1TB Serial ATA HD 1600MHz 7200/32MB/SATA-3G Cooling: Corsair Hydro H50 CPU Liquid Cooler Case: Corsair Obsidian 800D Full Tower Case Power Supply: Corsair HX1000W 1000W Modular Power Supply Steps I have taken to narrow down the problem: Restarted the computer. - No change Changed USB port the Hub was connected to on the CPU. - No change Removed all devices from USB Hub and connected directly to CPU. - No change Used a different USB keyboard both in USB Hub and directly to CPU. - No change Disconnected and reconnected all cables. - No change Disassembled the Tower and determined if the USB headers were firmly connected. - No change Checked device manager for errors. Checked all USB devices. - Nothing flagged After an hour of frustration trying to narrow down the problem it appeared to disappear. But I am torn between it being a Mobo problem or an OS problem. Is there anything else I can do to narrow down the problem before a reformat and then eventually exchanging the Mobo?

  Read the article

• Unable to login through varnish cache

  - by ArunS

  I am setting up Active Collab Site in my new server. The setup is like below Internet --- varnish ---- apache But i am not able to login to the site through varnish cache.. But i can login to site through apache. Here is my VCL file backend default { .host = "localhost"; .port = "8080"; } acl purge { "localhost"; } sub vcl_recv { if (req.request == "PURGE") { if (!client.ip ~ purge) { error 405 "Not allowed."; } return(lookup); } if (req.url ~ "^/$") { unset req.http.cookie; } } sub vcl_hit { if (req.request == "PURGE") { set obj.ttl = 0s; error 200 "Purged."; } } sub vcl_miss { if (req.request == "PURGE") { error 404 "Not in cache."; } if (!(req.url ~ "wp-(login|admin)")) { unset req.http.cookie; } if (req.url ~ "^/[^?]+.(jpeg|jpg|png|gif|ico|js|css|txt|gz|zip|lzma|bz2|tgz|tbz|html|htm)(\?.|)$") { unset req.http.cookie; set req.url = regsub(req.url, "\?.$", ""); } if (req.url ~ "^/$") { unset req.http.cookie; } } sub vcl_fetch { if (req.url ~ "^/$") { unset beresp.http.set-cookie; } if (!(req.url ~ "wp-(login|admin)")) { unset beresp.http.set-cookie; }} When i try to login through varnish i was redirect back to login page. If i enter wrong password, then it will ask for enter correct password.

  Read the article

• Ubuntu hard disk getting SATA errors

  - by Henadzy

  I am getting "UNC" errors on a hard disk on Ubuntu 9.10. It slows down my system, applications have not been responding for a long time. But when I mount the filesystem on another computer, it works properly. disk: SAMSUNG HD161HJ (SATA) syslog: Apr 25 00:28:25 vare6gin kernel: [ 885.773839] ata3.00: exception Emask 0x1 SAct 0x1e SErr 0x0 action 0x6 frozen Apr 25 00:28:25 vare6gin kernel: [ 885.773845] ata3.00: Ata error. fis:0x21 Apr 25 00:28:25 vare6gin kernel: [ 885.773861] ata3.00: cmd 60/08:08:3f:00:ad/00:00:10:00:00/40 tag 1 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773864] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773871] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773877] ata3.00: error: { UNC } [...snip 3 similar repeats of last 4 lines; see revision history for full log...] Apr 25 00:28:25 vare6gin kernel: [ 885.773970] ata3: hard resetting link Apr 25 00:28:25 vare6gin kernel: [ 885.773974] ata3: nv: skipping hardreset on occupied port Apr 25 00:28:25 vare6gin kernel: [ 886.240073] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 25 00:28:25 vare6gin kernel: [ 886.256277] ata3.00: configured for UDMA/133 Apr 25 00:28:25 vare6gin kernel: [ 886.256305] ata3: EH complete Apr 25 00:28:27 vare6gin kernel: [ 888.176088] ata3: EH in SWNCQ mode,QC:qc_active 0xF sactive 0xF Apr 25 00:28:27 vare6gin kernel: [ 888.176099] ata3: SWNCQ:qc_active 0xF defer_bits 0x0 last_issue_tag 0x3 Apr 25 00:28:27 vare6gin kernel: [ 888.176102] dhfis 0xF dmafis 0x1 sdbfis 0x0 Apr 25 00:28:27 vare6gin kernel: [ 888.176109] ata3: ATA_REG 0x51 ERR_REG 0x40 Apr 25 00:28:27 vare6gin kernel: [ 888.176113] ata3: tag : dhfis dmafis sdbfis sacitve Apr 25 00:28:27 vare6gin kernel: [ 888.176120] ata3: tag 0x0: 1 1 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176126] ata3: tag 0x1: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176131] ata3: tag 0x2: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176136] ata3: tag 0x3: 1 0 0 1

  Read the article

• What are problems and pitfalls with a public facing Active Directory

  - by Ralph Shillington

  The situation that i'm faced with is this: We plan on using a number of server applications hosted on Amazon EC2 machines, mainly Microsoft Team Foundation Server. These services rely heavily on Active Directory. Since our servers are in the Amazon cloud it should go without saying (but I will) that all our users are remote. It seems that we can't setup VPN on our EC2 instance -- so the users will have to join the domain, directly over the internet then they'll be able to authenticate and once authenticated, use that token for accessing resources such as TFS. on the DC instance, I can shut down all ports, except those needed for joining/authenicating to the domain. I can also filter the IP on that machine to just those address that we are expecting our users to be at (it's a small group) On the web based application servers, I imagine all we need to open is port 80 (or 8080 in the case of TFS) One of the problems that I'm faced with is what domain name to use for this Active directory. Should I go with "ourDomainName.com" or "OurDomainName.local" If I choose the latter, does that not mean that I'll have to get all our users to change their DNS address to point to our server, so it can resolve the domain name (I guess I could also distribute a host file) Perhaps there is another alternative that I'm completely missing.

  Read the article

• CUPS printer on Vritual Machine can be access via CUPS admin, but not by XP?

  - by SJaguar13

  I have a Zebra label printer connected to a Linux Mint virtual machine. It was set up with CUPS and a Windows XP computer can then print to it via http://192.168.1.76:632/printers/labelprinter. That was all fine and dandy I then hooked up a Fargo Pro L PVC card printer to a Windows XP virtual machine. I had to disconnect the label printer as the server that hosted both virtual machines only has 1 parallel port. Now I plugged in the Zebra again, and it cannot print from the Windows XP computer anymore. If I go to the CUPS admin panel on the Windows XP computer, I can see it, everything looks fine, and I can send it a test page to print which works. If I try to print from Windows, I get an error that the printer is not found/cannot connect to the server. The only other thing that changed was the firewall on the router to allow remote desktop to another computer from outside the network, but all the firewall stuff was for external use. Nothing affected the IP address of the internal network. The Linux Mint VM also had a PDF pritner that was shared with CUPS. That printer is also down. I tried setting up a new CUPS installation on another VM, and when I go to share it with XP, I get the same error. I don't know what to try. It has access, it can get to the admin from that computer, it seems to be up and ready, but when Windows tries to connect, the printer isn't found even though 4 days ago everything was fine. Any ideas?

  Read the article

• Computer sending data while turned off

  - by Nicklas Ansman

  I have a some what strange problem (which could have and easy and obvious solution for all I know). My problem is that when I've booted ubuntu (now 10.4 but same problem with 9.10) and turns it off it starts sending a HUGE amount of data via the ethernet cable, so much in fact that my router can't handle it and stops responding. As far as I can tell the computer is completely turned off with no fans spinning. I can add that if I boot windows I do not have this problem, just when exiting ubuntu. There are two "fixes" for my problem: Pull the ethernet cable until the next boot Turn off power to the PSU and wait for the capacitors to unload Is there anyone who knows what could be going on? I'd be happy to post some logs or conf-files. Currently I'm using the ethernet port on my motherboard which is a Asus P6T Deluxe V2 with an updated version of the BIOS (maybe not the latest but since it only happens when I've been in ubuntu I don't wanna mess with the BIOS too much). Regards Nicklas ---------Update 1---------- The router is a D-Link DIR 655 with the latest firmware. ---------Update 2---------- I've now reinstalled ubuntu (with 10.4) and I still experience the same problem.

  Read the article

• Live Screencast under Linux

  - by OmnipotentEntity

  I was having some difficulty with running a Live Screencast under Linux. I've found jtvlc and tried using that, but whenever I use it the stream comes out either blank or lagged with extremely high latency. I have a fast internet connection and a fast computer, but am I perhaps taxing it too much? Any ideas on what I could possibly be doing wrong? # 1. Get an account on http://www.justin.tv/ # 2. Copy streaming key from: http://www.justin.tv/broadcast/adv_other # 2. Install VLC: http://www.videolan.org/vlc/ # 3. Get Win/Mac/Lin Stream Client: \ # http://apiwiki.justin.tv/mediawiki/index.php/Linux_Broadcasting_API # 4. Adjust the vlc parameters to your liking and run VLC like this #!/bin/bash cvlc screen:// --input-slave=pulse:// \ --screen-width 1920 \ --screen-height 1080 \ --screen-fps 5 \ -v input_stream \ --sout='#duplicate{ dst="transcode{ scale=1, venc=x264{ keyint=60 }, vcodec=h264, vb=600, acodec=mp4a, ab=32, channels=2, samplerate=22050 } :rtp{dst=127.0.0.1,port=1234,sdp=file:///tmp/vlc.sdp} "}' \ --sout-transcode-threads=4 & sleep 2 # 5. Run JTVLC to stream like this: ./jtvlc/jtvlc omnipotententity censored /tmp/vlc.sdp # Notes: #- If you want to see what you're about to stream add 'dst=display, ' # before 'dst="transcode[' # More about the VLC parameters: http://wiki.videolan.org/Documentation:Modules/screen

  Read the article

• Require and Includes not Functioning Nginx Fpm/FastCGI

  - by Vince Kronlein

  I've split up my FPM pools so that php will run under each individual user and set the routing correctly in my vhost.conf files to pass the proper port number. But I must have something incorrect in my environment because on this new domain I set up, require, require_once, include, include_once do not function, or rather, they may not be getting passed up to the interpreter to be rendered as php. Since I already have a Wordpress install on this server that runs perfectly, I'm pretty sure the error is in my server block for nginx. server { server_name www.domain.com; rewrite ^(.*) http://domain.com$1 permanent; } server { listen 80; server_name domain.com; client_max_body_size 500M; index index.php index.html index.htm; root /home/username/public_html; location / { try_files $uri $uri/ index.php; } location ~ \.php$ { if (!-e $request_filename) { rewrite ^(.*)$ /index.php?name=$1 break; } fastcgi_pass 127.0.0.1:9002; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } location ~ /\.ht { deny all; } } The problem I'm finding I think is that there are dynamic calls to the doc root index file, while all calls to anything within a sub-folder should be routed as normal ie: NOT passed to index.php. I can't seem to find the right mix here. It should run like so: domain.com/cindy (file doesn't exist) --> index.php?name=$1 domain.com/admin/anyfile.php (files DO exist) --> admin/anyfile.php?$args

  Read the article

• How to point any *.mydomain variation to localhost (for development)?

  - by user41339

  Hi all. I am developing a site, which will make use of any given [variation of] subdomain name part (that is, the part prefixed before the host name and, optionally, the TLD part). I would imagine that in production, that would be an easy feat - make sure the DNS for second-level domain name part points to an IP, set up Apache2 virtual host to listen on that (or any) IP port 80, and just use PHP to make decisions based on the "Host" request header. However, currently the site is localhost, since I am developing it using my workstation, so first I patched the /etc/hosts to include: 127.0.0.1 mydomain I only used one name part (arguably a custom TLD) so as to not interfere with the Internet domain names. Then I set up a VirtualHost directive for Apache 2.2 like: <VirtualHost *:80> ServerName mydomain But now I can see that f.e. example.mydomain does not point to localhost, meaning the the /etc/hosts addition is not effective for "something.mydomain". It appears the rules are taken verbatim, and also I have checked that wildcards like *.mydomain are not allowed. Is there a solution for this?

  Read the article

• Default /server-status location not inheriting in Apache

  - by rmalayter

  I'm having a problem getting /server-status to work Apache 2.2.14 on Ubuntu Server 10.04.1. The default symlinks for status.load and status.conf are present in /etc/apache2/mods-enabled. The status.conf does include the location /server-status and appropriate allow/deny directives. However, the only vhost I have in sites-enabled looks like this. The idea is to proxy anything with a Tomcat URL to a cluster of tomcats, and anything else to an IIS box. However, this seems to result in requests to /server-status being sent to IIS. Copying the /server-status in explicitly to the Vhost configuration doesn't seem to help, no matter what order I use. Is it possible to include /server-status do this within a vhost configuration that has a "default" proxy rule?: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www Header add Set-Cookie "ROUTEID=.%{BALANCER_WORKER_ROUTE}e; path=/" env=BALANCER_ROUTE_CHANGED <Proxy balancer://tomcatCluster> BalancerMember ajp://qa-app1:8009 route=1 BalancerMember ajp://qa-app2:8009 route=2 ProxySet stickysession=ROUTEID </Proxy> <ProxyMatch "^/(mytomcatappA|mytomcatappB)/(.*)" > ProxyPassMatch balancer://tomcatCluster/$1/$2 </ProxyMatch> #proxy anything that's not a tomcat URL to IIS on port 80 <Proxy /> ProxyPass http://qa-web1/ </Proxy>

  Read the article

• Procurve Primary VLAN

  - by fukawi2

  I'm trying to depreciate usage of VLAN 1 on my ProCurve switches; 1 is unused. I understand that VLAN 1 must exist, but I want to remove it from all ports, especially trunks between switches. The problem I have is that stacking does not seem to work without VLAN 1. I have changed the primary VLAN and management VLAN on all the switches: (config)# primary-vlan 42 (config)# management-vlan 42 (config)# no vlan 1 untagged 25 Port 25 is the link between the 2 switches I'm testing with; the stack master and a member switch; I only want tagged traffic between the switches, no untagged frames. show stacking on the master shows all members as "UP" but I can not telnet any of them: Telnet failed: Connection timed out. All switches have manually assigned (static) IP addresses on VLAN 42, and all exist in the same /25 subnet, as does my desktop. I can telnet the switches directly from my desktop to the individual switch IP addresses, just not from the master switch. Do I need to reboot the switches to have the primary-vlan change take effect? Or is there something else I'm missing?

  Read the article

• Why does Windows Firewall want to block Google Chrome today?

  - by hippietrail

  I've been using the same public Wi-Fi (staying in a guesthouse) for over a week now. But this morning for the first time I got this puzzling warning from Windows Firewall: Why does Windows Firewall want to block one of the world's most popular web browsers today after being fine with it for years, and being fine with it on this connection for a week? Could it hinge on the words, some features? If so could it be something like a rare or new feature of Chrome that uses a different HTTP port? And if so why doesn't the security alert tell me any more about it? Or could it be a known bug in Windows Firewall? Or perhaps a known virus etc attaching itself to Google Chrome? Or is there a chance it's related to "Other browser makers follow Google's lead, revoke rogue certificates"? I haven't restarted Chrome for days and have downloaded but not installed a Windows update from a few days ago. So I'm not sure what may have managed to change on my machine since yesterday.

  Read the article

• Unable to logon using terminal server connection

  - by satch

  I have several W2K3 SP2 servers, admin TS enabled. I discovered this morning, I was unable to logon into some of them. I've a couple of Citrix servers in different farms, a SAP (IA64) app server and a cvs server. All of them show same sympthoms; remote connections are refused. I've been able to logon locally, and terminal server service is up, there are no users (so connections are not depleted). There are no errors in log in most servers. One of the Citrix ones, reported following errors: Event ID 50 Source TermDD Type Error Description The RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client. and Event ID 1006 Source TermService Type Error Description The terminal server received large number of incomplete connections. The system may be under attack. Anyway, I suppose these errors appear because server isn't working, and Citrix users try to logon massively. (I nmap'ed server and port seems up). I've solved this problem rebooting before, but with so many servers affected it seems like a crappy workaround. Any idea about troubleshooting it properly? Thanks in advance

  Read the article

• Two servers, two domains, one ip. mod_proxy beginner

  - by Gutsav

  I run two virtual web servers (both running apache2 on debian). I have just one external IP, but two domains, and I want a domain going to each of the servers. I've understood that I need a Reverse Proxy, and I enabled both the mod_proxy and the mod_proxy_http modules on the "primary server". Do I need to enable anything on the "secondary server"? I also understood that I need to write some things in a virtual host file, but what? On the primary server, I have a virtual host file for one of the domains, and some for subdomains. I want domain1.tld to go to the primary server (port 80 is forwarded to it, so that works) and domain2.tld to go to the other server (internal ip 192.168.0.x). No ports needs to be forwarded to it, right? So, what to add and in which virtual host file? Or a new one? Other questions suggest adding ProxyPass and ProxyPassReverse, but I'm lost anyway, and I just don't understand the apache documentation. Thanks in advance

  Read the article

< Previous Page | 419 420 421 422 423 424 425 426 427 428 429 430  | Next Page >