Search Results

Search found 11146 results on 446 pages for 'dynamic queries'.

Page 424/446 | < Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >

• Simplifying Human Capital Management with Mobile Applications

  - by HCM-Oracle

  By Aaron Green If you're starting to think 'mobility' is a recurring theme in your reading, you'd be right. For those who haven't started to build organisational capabilities to leverage it, it's fair to say you're late to the party. The good news: better late than never. Research firm eMarketer says the worldwide smartphone audience will total 1.75 billion this year, while communications technology and services provider Ericsson suggests smartphones will triple to 5.6 billion globally by 2019. It should be no surprise, smart phone adoption is reaching the farthest corners of the globe; the subsequent impact of enterprise applications enabled by these devices is driving business performance improvement and will continue to do so. Companies using advanced workforce analytics can add significantly to the bottom line, while impacting customer satisfaction, quality and productivity. It's a statement that makes most business leaders sit forward in their chairs. Achieving these three standards is like sipping The Golden Elixir for the business world. No-one would argue their importance. So what are 'advanced workforce analytics?' Simply, they're unprecedented access to workforce trends and performance markers. Many are made possible by a mobile world and the enterprise applications that come with it on smart devices. Some refer to it as 'the consumerisation of IT'. As this phenomenon has matured and become more widely appreciated it has impacted the spectrum of functional units within an enterprise differently, but powerfully. Whether it's sales, HR, marketing, IT, or operations, all have benefited from a more mobile approach. It has been the catalyst for improvement in, and management of, the employee experience. The net result of which is happier customers. The obvious benefits but the lesser realised impact Most people understand that mobility allows for greater efficiency and productivity, collaboration and flexibility, but how that translates into business outcomes within the various functional groups is lesser known. In actuality mobility has helped galvanise partnerships between cross-functional groups within the enterprise. Where in some quarters it was once feared mobility could fragment a workforce, its rallying cry of support is coming from what you might describe as an unlikely source - HR. As the bedrock of an enterprise, it is conceivable HR might contemplate the possible negative impact of a mobile workforce that no-longer sits in an office, at the same desks every day. After all, who would know what they were doing or saying? How would they collaborate? It's reasonable to see why HR might have a legitimate claim to try and retain as much 'perceived control' as possible. The reality however is mobility has emancipated human capital and its management. Mobility and enterprise applications are expediting decision making. Google calls it Zero Moment of Truth, or ZMOT. It enables smoother operation and can contribute to faster growth. From a collaborative perspective, with the growing use of enterprise social media, which in many cases is being driven by HR, workforce planning and the tangible impact of change is much easier to map. This in turn provides a platform from which individuals and teams can thrive. With more agility and ability to anticipate, staff satisfaction and retention is higher, and real time feedback constant. The management team can save time, energy and costs with more accurate data, which is then intelligently applied across the workforce to truly engage with staff, customers and partners. From a human capital management (HCM) perspective, mobility can help you close the loop on true talent management. It can enhance what managers can offer and what employees can provide in return. It can create nested relationships and powerful partnerships. IT and HR - partners and stewards of mobility One effect of enterprise mobility is an evolution in the nature of the relationship between HR and IT from one of service provision to partnership. The reason for the dynamic shift is largely due to the 'bring your own device' (BYOD) movement, which is transitioning to a 'bring your own application' (BYOA) scenario. As enterprise technology has in some ways reverse-engineered its solutions to help manage this situation, the partnership between IT (the functional owner) and HR (the strategic enabler) is deeply entrenched. And it has to be. The CIO and the HR leader are faced with compliance and regulatory issues and concerns around information security and personal privacy on a daily basis, complicated by global reach and varied domestic legislation. There are tens of thousands of new mobile apps entering the market each month and, unlike many consumer applications which get downloaded but are often never opened again after initial perusal, enterprise applications are being relied upon by functional groups, not least by HR to enhance people management. It requires a systematic approach across all applications in use within the enterprise in order to ensure they're used to best effect. No turning back, and no desire to With real time analytics on performance and the ability for immediate feedback, there is no turning back for managers. In my experience with Oracle, our customers' operational efficiency is at record levels. It's clear as a result of the combination of individual KPIs and organisational goals, CIOs have been able to give HR leaders the ability to build predictive models that feed into an enterprise organisations' evolving strategy. It also helps them ensure regulatory compliance much more easily. Once an arduous task, with mobile enabled automation and quality data, compliance is simpler. Their world has changed for the better. For the CIO, mobility also assists them to optimise performance. While it doesn't come without challenges, mobile-enabled applications and the native experience users have with them means employees don't need high-level technical expertise to train users. It reduces the training and engagement required from the IT team so they can focus on other things that deliver value to the bottom line; all the while lowering the cost of assets and related maintenance work by simplifying processes. Rewards of a mobile enterprise outweigh risks With mobile tools allowing us to increasingly integrate our personal and professional lives, terms like "office hours" are becoming irrelevant, so work/life balance is a cultural must. Enterprises are expected to offer tools that enable workers to access information from anywhere, at any time, from any device. Employees want simplicity and convenience but it doesn't stop at private enterprise. This is a societal shift. Governments, which traditionally have been known to be slower to adopt newer technology, are also offering support for local businesses to go mobile. Several state government websites have advice on how to create mobile apps and more. And as recently as last week the Victorian Minister for Technology Gordon Rich-Phillips unveiled his State government's ICT roadmap for the next two years, which details an increased use of the public cloud, as well as mobile communications, and improved access to online data-sets. Tech giants are investing significantly in solutions designed to simplify mobile deployment and enablement. The mobility trend is creating a wave of change in the industry and driving transformation in the enterprise. If you're not on that wave, the business risk continues to rise as your competitiveness drops. Aaron is the Vice President of HCM Strategy at Oracle Corporation where he is responsible for researching and identifying emerging trends in the practice of Human Resources and works to deliver industry-leading technology solutions. Other responsibilities include, ownership of Oracle's innovative HCM solutions across JAPAC and enabling organisations to transform and modernise their workforce tools. Follow him on Twitter @aaronjgreen

  Read the article

• Online ALTER TABLE in MySQL 5.6

  - by Marko Mäkelä

  This is the low-level view of data dictionary language (DDL) operations in the InnoDB storage engine in MySQL 5.6. John Russell gave a more high-level view in his blog post April 2012 Labs Release – Online DDL Improvements. MySQL before the InnoDB Plugin Traditionally, the MySQL storage engine interface has taken a minimalistic approach to data definition language. The only natively supported operations were CREATE TABLE, DROP TABLE and RENAME TABLE. Consider the following example: CREATE TABLE t(a INT); INSERT INTO t VALUES (1),(2),(3); CREATE INDEX a ON t(a); DROP TABLE t; The CREATE INDEX statement would be executed roughly as follows: CREATE TABLE temp(a INT, INDEX(a)); INSERT INTO temp SELECT * FROM t; RENAME TABLE t TO temp2; RENAME TABLE temp TO t; DROP TABLE temp2; You could imagine that the database could crash when copying all rows from the original table to the new one. For example, it could run out of file space. Then, on restart, InnoDB would roll back the huge INSERT transaction. To fix things a little, a hack was added to ha_innobase::write_row for committing the transaction every 10,000 rows. Still, it was frustrating that even a simple DROP INDEX would make the table unavailable for modifications for a long time. Fast Index Creation in the InnoDB Plugin of MySQL 5.1 MySQL 5.1 introduced a new interface for CREATE INDEX and DROP INDEX. The old table-copying approach can still be forced by SET old_alter_table=0. This interface is used in MySQL 5.5 and in the InnoDB Plugin for MySQL 5.1. Apart from the ability to do a quick DROP INDEX, the main advantage is that InnoDB will execute a merge-sort algorithm before inserting the index records into each index that is being created. This should speed up the insert into the secondary index B-trees and potentially result in a better B-tree fill factor. The 5.1 ALTER TABLE interface was not perfect. For example, DROP FOREIGN KEY still invoked the table copy. Renaming columns could conflict with InnoDB foreign key constraints. Combining ADD KEY and DROP KEY in ALTER TABLE was problematic and not atomic inside the storage engine. The ALTER TABLE interface in MySQL 5.6 The ALTER TABLE storage engine interface was completely rewritten in MySQL 5.6. Instead of introducing a method call for every conceivable operation, MySQL 5.6 introduced a handful of methods, and data structures that keep track of the requested changes. In MySQL 5.6, online ALTER TABLE operation can be requested by specifying LOCK=NONE. Also LOCK=SHARED and LOCK=EXCLUSIVE are available. The old-style table copying can be requested by ALGORITHM=COPY. That one will require at least LOCK=SHARED. From the InnoDB point of view, anything that is possible with LOCK=EXCLUSIVE is also possible with LOCK=SHARED. Most ALGORITHM=INPLACE operations inside InnoDB can be executed online (LOCK=NONE). InnoDB will always require an exclusive table lock in two phases of the operation. The execution phases are tied to a number of methods: handler::check_if_supported_inplace_alter Checks if the storage engine can perform all requested operations, and if so, what kind of locking is needed. handler::prepare_inplace_alter_table InnoDB uses this method to set up the data dictionary cache for upcoming CREATE INDEX operation. We need stubs for the new indexes, so that we can keep track of changes to the table during online index creation. Also, crash recovery would drop any indexes that were incomplete at the time of the crash. handler::inplace_alter_table In InnoDB, this method is used for creating secondary indexes or for rebuilding the table. This is the ‘main’ phase that can be executed online (with concurrent writes to the table). handler::commit_inplace_alter_table This is where the operation is committed or rolled back. Here, InnoDB would drop any indexes, rename any columns, drop or add foreign keys, and finalize a table rebuild or index creation. It would also discard any logs that were set up for online index creation or table rebuild. The prepare and commit phases require an exclusive lock, blocking all access to the table. If MySQL times out while upgrading the table meta-data lock for the commit phase, it will roll back the ALTER TABLE operation. In MySQL 5.6, data definition language operations are still not fully atomic, because the data dictionary is split. Part of it is inside InnoDB data dictionary tables. Part of the information is only available in the *.frm file, which is not covered by any crash recovery log. But, there is a single commit phase inside the storage engine. Online Secondary Index Creation It may occur that an index needs to be created on a new column to speed up queries. But, it may be unacceptable to block modifications on the table while creating the index. It turns out that it is conceptually not so hard to support online index creation. All we need is some more execution phases: Set up a stub for the index, for logging changes. Scan the table for index records. Sort the index records. Bulk load the index records. Apply the logged changes. Replace the stub with the actual index. Threads that modify the table will log the operations to the logs of each index that is being created. Errors, such as log overflow or uniqueness violations, will only be flagged by the ALTER TABLE thread. The log is conceptually similar to the InnoDB change buffer. The bulk load of index records will bypass record locking. We still generate redo log for writing the index pages. It would suffice to log page allocations only, and to flush the index pages from the buffer pool to the file system upon completion. Native ALTER TABLE Starting with MySQL 5.6, InnoDB supports most ALTER TABLE operations natively. The notable exceptions are changes to the column type, ADD FOREIGN KEY except when foreign_key_checks=0, and changes to tables that contain FULLTEXT indexes. The keyword ALGORITHM=INPLACE is somewhat misleading, because certain operations cannot be performed in-place. For example, changing the ROW_FORMAT of a table requires a rebuild. Online operation (LOCK=NONE) is not allowed in the following cases: when adding an AUTO_INCREMENT column, when the table contains FULLTEXT indexes or a hidden FTS_DOC_ID column, or when there are FOREIGN KEY constraints referring to the table, with ON…CASCADE or ON…SET NULL option. The FOREIGN KEY limitations are needed, because MySQL does not acquire meta-data locks on the child or parent tables when executing SQL statements. Theoretically, InnoDB could support operations like ADD COLUMN and DROP COLUMN in-place, by lazily converting the table to a newer format. This would require that the data dictionary keep multiple versions of the table definition. For simplicity, we will copy the entire table, even for DROP COLUMN. The bulk copying of the table will bypass record locking and undo logging. For facilitating online operation, a temporary log will be associated with the clustered index of table. Threads that modify the table will also write the changes to the log. When altering the table, we skip all records that have been marked for deletion. In this way, we can simply discard any undo log records that were not yet purged from the original table. Off-page columns, or BLOBs, are an important consideration. We suspend the purge of delete-marked records if it would free any off-page columns from the old table. This is because the BLOBs can be needed when applying changes from the log. We have special logging for handling the ROLLBACK of an INSERT that inserted new off-page columns. This is because the columns will be freed at rollback.

  Read the article

• Resolving data redundancy up front

  - by okeofs

  Introduction As all of us do when confronted with a problem, the resource of choice is to ‘Google it’. This is where the plot thickens. Recently I was asked to stage data from numerous databases which were to be loaded into a data warehouse. To make a long story short, I was looking for a manner in which to obtain the table names from each database, to ascertain potential overlap.   As the source data comes from a SQL database created from dumps of a third party product,  one could say that there were +/- 95 tables for each database.   Yes I know that first instinct is to use the system stored procedure “exec sp_msforeachdb 'select "?" AS db, * from [?].sys.tables'”. However, if one stops to think about this, it would be nice to have all the results in a temporary or disc based  table; which in itself , implies additional labour. This said,  I decided to ‘re-invent’ the wheel. The full code sample may be found at the bottom of this article.   Define a few temporary tables and variables   declare @SQL varchar(max); declare @databasename varchar(75) /* drop table ##rawdata3 drop table #rawdata1 drop table #rawdata11 */ -- A temp table to hold the names of my databases CREATE TABLE #rawdata1 (    database_name varchar(50) ,    database_size varchar(50),    remarks Varchar(50) )     --A temp table with the same database names as above, HOWEVER using an --Identity number (recNO) as a loop variable. --You will note below that I loop through until I reach 25 (see below) as at --that point the system databases, the reporting server database etc begin. --1- 24 are user databases. These are really what I was looking for. --Whilst NOT the best solution,it works and the code was meant as a quick --and dirty. CREATE TABLE #rawdata11 (    recNo int identity(1,1),    database_name varchar(50) ,    database_size varchar(50),    remarks Varchar(50) )   --My output table showing the database name and table name CREATE TABLE ##rawdata3 (    database_name varchar(75) ,    table_name varchar(75), )   Insert the database names into a temporary table I pull the database names using the system stored procedure sp_databases   INSERT INTO #rawdata1 EXEC sp_databases Go   Insert the results from #rawdata1 into a table containing a record number  #rawdata11 so that I can LOOP through the extract   INSERT into #rawdata11 select * from  #rawdata1   We now declare 3 more variables:  @kounter is used to keep track of our position within the loop. @databasename is used to keep track of the’ current ‘ database name being used in the current pass of the loop;  as inorder to obtain the tables for that database we  need to issue a ‘USE’ statement, an insert command and other related code parts. This is the challenging part. @sql is a varchar(max) variable used to contain the ‘USE’ statement PLUS the’ insert ‘ code statements. We now initalize @kounter to 1 .   declare @kounter int; declare @databasename varchar(75); declare @sql varchar(max); set @kounter = 1   The Loop The astute reader will remember that the temporary table #rawdata11 contains our  database names  and each ‘database row’ has a record number (recNo). I am only interested in record numbers under 25. I now set the value of the temporary variable @DatabaseName (see below) .Note that I used the row number as a part of the predicate. Now, knowing the database name, I can create dynamic T-SQL to be executed using the sp_sqlexec stored procedure (see the code in red below). Finally, after all the tables for that given database have been placed in temporary table ##rawdata3, I increment the counter and continue on. Note that I used a global temporary table to ensure that the result set persists after the termination of the run. At some stage, I plan to redo this part of the code, as global temporary tables are not really an ideal solution.    WHILE (@kounter < 25)  BEGIN  select @DatabaseName = database_name from #rawdata11 where recNo = @kounter  set @SQL = 'Use ' + @DatabaseName + ' Insert into ##rawdata3 ' + + ' SELECT table_catalog,Table_name FROM information_schema.tables' exec sp_sqlexec  @Sql  SET @kounter  = @kounter + 1  END   The full code extract   Here is the full code sample.   declare @SQL varchar(max); declare @databasename varchar(75) /* drop table ##rawdata3 drop table #rawdata1 drop table #rawdata11 */ CREATE TABLE #rawdata1 (    database_name varchar(50) ,    database_size varchar(50),    remarks Varchar(50) ) CREATE TABLE #rawdata11 (    recNo int identity(1,1),    database_name varchar(50) ,    database_size varchar(50),    remarks Varchar(50) ) CREATE TABLE ##rawdata3 (    database_name varchar(75) ,    table_name varchar(75), )   INSERT INTO #rawdata1 EXEC sp_databases go INSERT into #rawdata11 select * from  #rawdata1 declare @kounter int; declare @databasename varchar(75); declare @sql varchar(max); set @kounter = 1 WHILE (@kounter < 25)  BEGIN  select @databasename = database_name from #rawdata11 where recNo = @kounter  set @SQL = 'Use ' + @DatabaseName + ' Insert into ##rawdata3 ' + + ' SELECT table_catalog,Table_name FROM information_schema.tables' exec sp_sqlexec  @Sql  SET @kounter  = @kounter + 1  END    select * from ##rawdata3  where table_name like '%SalesOrderHeader%'

  Read the article

• Azure Task Scheduling Options

  - by charlie.mott

  Currently, the Azure PaaS does not offer a distributed\resilient task scheduling service.  If you do want to host a task scheduling product\solution off-premise (and ideally use Azure), what are your options? PaaS Option 1: Worker Roles Use a worker role to schedule and execute actions at specific time periods.  There are a few frameworks available to assist with this: http://azuretoolkit.codeplex.com https://github.com/Lokad/lokad-cloud/wiki/TaskScheduler http://blog.smarx.com/posts/building-a-task-scheduler-in-windows-azure - This addresses a slightly different set of requirements. It’s a more dynamic approach for queuing up tasks, but not repeatable tasks (e.g. daily). I found the Azure Toolkit option the most simple to implement.  Step 1 : Create a domain entity implementing IJob for each job to schedule.  In this sample, I asynchronously call a WCF service method. 1: namespace Acme.WorkerRole.Jobs 2: { 3: using AzureToolkit; 4: using ScheduledTasksService; 5: 6: public class UploadEmployeesJob : IJob 7: { 8: public void Run() 9: { 10: // Call Tasks Service 11: var client = new ScheduledTasksServiceClient("BasicHttpBinding_IScheduledTasksService"); 12: client.UploadEmployees(); 13: client.Close(); 14: } 15: } 16: } Step 2 : In the worker role run method, add the jobs to the toolkit engine. 1: namespace Acme.WorkerRole 2: { 3: using AzureToolkit.Engine; 4: using Jobs; 5:   6: public class WorkerRole : WorkerRoleEntryPoint 7: { 8: public override void Run() 9: { 10: var engine = new CloudEngine(); 11:   12: // Add Scheduled Jobs (using CronJob syntax - see http://www.adminschoice.com/crontab-quick-reference). 13:   14: // 1. Upload Employee job - 8.00 PM every weekday (Mon-Fri) 15: engine.WithJobScheduler().ScheduleJob<UploadEmployeesJob>(c => { c.CronSchedule = "0 20 * * 1-5"; }); 16: // 2. Purge Data job - 10 AM every Saturday 17: engine.WithJobScheduler().ScheduleJob<PurgeDataJob>(c => { c.CronSchedule = "0 10 * * 6"; }); 18: // 3. Process Exceptions job - Every 5 minutes 19: engine.WithJobScheduler().ScheduleJob<ProcessExceptionsJob>(c => { c.CronSchedule = "*/5 * * * *"; }); 20:   21: engine.Run(); 22: base.Run(); 23: } 24: } 25: } Pros Cons Azure Toolkit option is simple to implement. For the AzureToolkit option, you are limited to a single worker role.  Otherwise, the jobs will be executed multiple times, once for each worker role instance.   Paying for a continuously running worker role, even if it just processes a single job once a week.  If you only have a few scheduled tasks to run calling asynchronous services hosted in different web roles, an extra small worker role likely to be sufficient.  However, for an extra small worker role this still costs $14.40/month (03/09/2012). Option 2: Use Scheduled Task on Azure Web Role calling a console app Setup a Windows Scheduled Task on the Azure Web Role. This calls a console application that calls the WCF service methods that run the task actions. This design is described here: http://www.ronaldwidha.net/2011/02/23/cron-job-on-azure-using-scheduled-task-on-a-web-role-to-replace-azure-worker-role-for-background-job/ http://www.voiceoftech.com/swhitley/index.php/2011/07/windows-azure-task-scheduler/ http://devlicio.us/blogs/vinull/archive/2011/10/23/moving-to-azure-worker-roles-for-nothing-and-tasks-for-free.aspx Pros Cons Fairly easy to implement. Supportability - I RDC’ed onto the Azure server and stopped the scheduled task. I then rebooted the machine and the task was re-started. I also tried deleting the task and rebooting, the same thing occurred. The only way to permanently guarantee that a task is disabled is to do a fresh deployment. I think this is a major supportability concern.   Saleability - multiple instances would trigger multiple tasks. You can only have one instance for the scheduled task web role. The guidance implements setup of the scheduled task as part of a web role instance. But if you have more than one instance in a web role, the task will be triggered multiple times for each scheduled action (once per machine). Workaround: If we wanted to use scheduled tasks for another client with a saleable WCF service, then we could include the console & tasks scripts in a separate web role (e.g. a empty WCF service with no real purpose to it). SaaS Option 3: Azure Marketplace I thought that someone might be offering this type of service via the Azure marketplace. At the point of writing this blog post, I did not find anyone doing so. https://datamarket.azure.com/ Pros Cons   Nobody currently offers this on the Azure Marketplace. Option 4: Online Job Scheduling Service Provider There are plenty of online providers that offer this type of service on a pay-as-you-go approach.  Some of these are free for small usage.   Many of these providers are listed here: http://en.wikipedia.org/wiki/Webcron Pros Cons No bespoke development for scheduler. Reliance on third party. IaaS Option 5: Setup Scheduling Software on Azure IaaS VM’s One of job scheduling software offerings could be installed and configured on Azure VM’s.  A list of software options is listed here: http://en.wikipedia.org/wiki/List_of_job_scheduler_software Pros Cons Enterprise distributed\resilient task scheduling service VM Setup and maintenance   Software Licence Costs Option 6: VM Gallery A the time of writing this blog post, I did not spot a VM in the gallery that included pre-installation of any of the above software options. Pros Cons   No current VM template. Summary For my current project that had a small handful of tasks to schedule with a limited project budget I chose option 1 (a worker role using the Azure Toolkit to schedule tasks).  If I was building an enterprise scale solution for the future, options 4 and 5 are currently worthy of consideration. Hopefully, Microsoft will include tasks scheduling in the future as part of their PaaS offerings.

  Read the article

• Clouds Everywhere But not a Drop of Rain – Part 3

  - by sxkumar

  I was sharing with you how a broad-based transformation such as cloud will increase agility and efficiency of an organization if process re-engineering is part of the plan.  I have also stressed on the key enterprise requirements such as “broad and deep solutions, “running your mission critical applications” and “automated and integrated set of capabilities”. Let me walk you through some key cloud attributes such as “elasticity” and “self-service” and what they mean for an enterprise class cloud. I will also talk about how we at Oracle have taken a very enterprise centric view to developing cloud solutions and how our products have been specifically engineered to address enterprise cloud needs. Cloud Elasticity and Enterprise Applications Requirements Easy and quick scalability for a short-period of time is the signature of cloud based solutions. It is this elasticity that allows you to dynamically redistribute your resources according to business priorities, helps increase your overall resource utilization, and reduces operational costs by allowing you to get the most out of your existing investment. Most public clouds are offering a instant provisioning mechanism of compute power (CPU, RAM, Disk), customer pay for the instance-hours(and bandwidth) they use, adding computing resources at peak times and removing them when they are no longer needed. This type of “just-in-time” serving of compute resources is well known for mid-tiers “state less” servers such as web application servers and web servers that just need another machine to start and run on it but what does it really mean for an enterprise application and its underlying data? Most enterprise applications are not as quite as “state less” and justifiably so. As such, how do you take advantage of cloud elasticity and make it relevant for your enterprise apps? This is where Cloud meets Grid Computing. At Oracle, we have invested enormous amount of time, energy and resources in creating enterprise grid solutions. All our technology products offer built-in elasticity via clustering and dynamic scaling. With products like Real Application Clusters (RAC), Automatic Storage Management, WebLogic Clustering, and Coherence In-Memory Grid, we allow all your enterprise applications to benefit from Cloud elasticity –both vertically and horizontally - without requiring any application changes. A number of technology vendors take a rather simplistic route of starting up additional or removing unneeded VM as the "Cloud Scale-Out" solution. While this may work for stateless mid-tier servers where load balancers can handle the addition and remove of instances transparently but following a similar approach for the database tier - often called as "database sharding" - requires significant application modification and typically does not work with off the shelf packaged applications. Technologies like Oracle Database Real Application Clusters, Automatic Storage Management, etc. on the other hand bring the benefits of incremental scalability and on-demand elasticity to ANY application by providing a simplified abstraction layers where the application does not need deal with data spread over multiple database instances. Rather they just talk to a single database and the database software takes care of aggregating resources across multiple hardware components. It is the technologies like these that truly make a cloud solution relevant for enterprises.  For customers who are looking for a next generation hardware consolidation platform, our engineered systems (e.g. Exadata, Exalogic) not only provide incredible amount of performance and capacity, they also reduce the data center complexity and simplify operations. Assemble, Deploy and Manage Enterprise Applications for Cloud Products like Oracle Virtual assembly builder (OVAB) resolve the complex problem of bringing the cloud speed to complex multi-tier applications. With assemblies, you can not only provision all components of a multi-tier application and wire them together by push of a button, other aspects of application lifecycle, such as real-time application testing, scale-up/scale-down, performance and availability monitoring, etc., are also automated using Oracle Enterprise Manager.  An essential criteria for an enterprise cloud to succeed is the ability to ensure business service levels especially when business users have either full visibility on the usage cost with a “show back” or a “charge back”. With Oracle Enterprise Manager 12c, we have created the most comprehensive cloud management solution in the industry that is capable of managing business service levels “applications-to-disk” in a enterprise private cloud – all from a single console. It is the only cloud management platform in the industry that allows you to deliver infrastructure, platform and application cloud services out of the box. Moreover, it offers integrated and complete lifecycle management of the cloud - including planning and set up, service delivery, operations management, metering and chargeback, etc .  Sounds unbelievable? Well, just watch this space for more details on how Oracle Enterprise Manager 12c is the nerve center of Oracle Cloud! Our cloud solution portfolio is also the broadest and most deep in the industry  - covering public, private, hybrid, Infrastructure, platform and applications clouds. It is no coincidence therefore that the Oracle Cloud today offers the most comprehensive set of public cloud services in the industry.  And to a large part, this has been made possible thanks to our years on investment in creating cloud enabling technologies.  Summary  But the intent of this blog post isn't to dwell on how great our solutions are (these are just some examples to illustrate how we at Oracle have approached this problem space). Rather it is to help you ask the right questions before you embark on your cloud journey.  So to summarize, here are the key takeaways.       It is critical that you are clear on why you are building the cloud. Successful organizations keep business benefits as the first and foremost cloud objective. On the other hand, those who approach this purely as a technology project are more likely to fail. Think about where you want to be in 3-5 years before you get started. Your long terms objectives should determine what your first step ought to be. As obvious as it may seem, more people than not make the first move without knowing where they are headed.  Don’t make the mistake of equating cloud to virtualization and Infrastructure-as-a-Service (IaaS). Spinning a VM on-demand will give some short term relief to your IT staff but is unlikely to solve your larger business problems. As such, even if IaaS is your first step towards a more comprehensive cloud, plan the roadmap around those higher level services before you begin. And ask your vendors on how they are going to be your partners in this journey. Capabilities like self-service access and chargeback/showback are absolutely critical if you really expect your cloud to be transformational. Your business won't see the full benefits of the cloud until it empowers them with same kind of control and transparency that they are used to while using a public cloud service.  Evaluate the benefits of integration, as opposed to blindly following the best-of-breed strategy. Integration is a huge challenge and more so in a cloud environment. There are enormous costs associated with stitching a solution out of disparate components and even more in maintaining it. Hope you found these ideas helpful. Looking forward to hearing your thoughts and experiences.

  Read the article

• SOA Implementation Challenges

  Why do companies think that if they put up a web service that they are doing Service-Oriented Architecture (SOA)? Unfortunately, the IT and business world love to run on the latest hype or buzz words of which very few even understand the meaning. One of the largest issues companies have today as they consider going down the path of SOA, is the lack of knowledge regarding the architectural style and the over usage of the term SOA. So how do we solve this issue?I am sure most of you are thinking by now that you know what SOA is because you developed a few web services.  Isn’t that SOA, right? No, that is not SOA, but instead Just Another Web Service (JAWS). For us to better understand what SOA is let’s look at a few definitions.Douglas K. Bary defines service-oriented architecture as a collection of services. These services are enabled to communicate with each other in order to pass data or coordinating some activity with other services.If you look at this definition closely you will notice that Bary states that services communicate with each other. Let us compare this statement with my first statement regarding companies that claim to be doing SOA when they have just a collection of web services. In order for these web services to for an SOA application they need to be interdependent on one another forming some sort of architectural hierarchy. Just because a company has a few web services does not mean that they are all interconnected.SearchSOA from TechTarget.com states that SOA defines how two computing entities work collectively to enable one entity to perform a unit of work on behalf of another. Once again, just because a company has a few web services does not guarantee that they are even working together let alone if they are performing work for each other.SearchSOA also points out service interactions should be self-contained and loosely-coupled so that all interactions operate independent of each other.Of all the definitions regarding SOA Thomas Erl’s seems to shed the most light on this concept. He states that “SOA establishes an architectural model that aims to enhance the efficiency, agility, and productivity of an enterprise by positioning services as the primary means through which solution logic is represented in support of the realization of the strategic goals associated with service-oriented computing.” (Erl, 2011) Once again this definition proves that a collection of web services does not mean that a company is doing SOA. However, it does mean that a company has a collection of web services, and that is it.In order for a company to start to go down the path of SOA, they must take  a hard look at their existing business process while abstracting away any technology so that they can define what is they really want to accomplish. Once a company has done this, they can begin to factor out common sub business process like credit card process, user authentication or system notifications in to small components that can be built independent of each other and then reassembled to form new and dynamic services that are loosely coupled and agile in that they can change as a business grows.Another key pitfall of companies doing SOA is the fact that they let vendors drive their architecture. Why do companies do this? Vendors’ do not hold your company’s success as their top priority; in fact they hold their own success as their top priority by selling you as much stuff as you are willing to buy. In my experience companies tend to strive for the maximum amount of benefits with a minimal amount of cost. Does anyone else see any conflicts between this and the driving force behind vendors.Mike Kavis recommends in an article written in CIO.com that companies need to figure out what they need before they talk to a vendor or at least have some idea of what they need. It is important to thoroughly evaluate each vendor and watch them perform a live demo of their system so that you as the company fully understand what kind of product or service the vendor is actually offering. In addition, do research on each vendor that you are considering, check out blog posts, online reviews, and any information you can find on the vendor through various search engines.Finally he recommends companies to verify any recommendations supplied by a vendor. From personal experience this is very important. I can remember when the company I worked for purchased a $200,000 add-on to their phone system that never actually worked as it was intended. In fact, just after my departure from the company started the process of attempting to get their money back from the vendor. This potentially could have been avoided if the company had done the research before selecting this vendor to ensure that their product and vendor would live up to their claims. I know that some SOA vendor offer free training regarding SOA because they know that there are a lot of misconceptions about the topic. Superficially this is a great thing for companies to take part in especially if the company is starting to implement SOA architecture and are still unsure about some topics or are looking for some guidance regarding the topic. However beware that some companies will focus on their product line only regarding the training. As an example, InfoWorld.com claims that companies providing deep seminars disguised as training, focusing more about ESBs and SOA governance technology, and less on how to approach and solve the architectural issues of the attendees.In short, it is important to remember that we as software professionals are responsible for guiding a business’s technology sections should be well informed and fully understand any new concepts that may be considered for implementation. As I have demonstrated already a company that has a few web services does not mean that they are doing SOA.  Additionally, we must not let the new buzz word of the day drive our technology, but instead our technology decisions should be driven from research and proven experience. Finally, it is important to rely on vendors when necessary, however, always take what they say with a grain of salt while cross checking any claims that they may make because we have to live with the aftermath of a system after the vendors are gone.   References: Barry, D. K. (2011). Service-oriented architecture (SOA) definition. Retrieved 12 12, 2011, from Service-Architecture.com: http://www.service-architecture.com/web-services/articles/service-oriented_architecture_soa_definition.html Connell, B. (2003, 9). service-oriented architecture (SOA). Retrieved 12 12, 2011, from SearchSOA: http://searchsoa.techtarget.com/definition/service-oriented-architecture Erl, T. (2011, 12 12). Service-Oriented Architecture. Retrieved 12 12, 2011, from WhatIsSOA: http://www.whatissoa.com/p10.php InfoWorld. (2008, 6 1). Should you get your SOA knowledge from SOA vendors? . Retrieved 12 12, 2011, from InfoWorld.com: http://www.infoworld.com/d/architecture/should-you-get-your-soa-knowledge-soa-vendors-453 Kavis, M. (2008, 6 18). Top 10 Reasons Why People are Making SOA Fail. Retrieved 12 13, 2011, from CIO.com: http://www.cio.com/article/438413/Top_10_Reasons_Why_People_are_Making_SOA_Fail?page=5&taxonomyId=3016  

  Read the article

• Entity Framework 6: Alpha2 Now Available

  - by ScottGu

  The Entity Framework team recently announced the 2nd alpha release of EF6.   The alpha 2 package is available for download from NuGet. Since this is a pre-release package make sure to select “Include Prereleases” in the NuGet package manager, or execute the following from the package manager console to install it: PM> Install-Package EntityFramework -Pre This week’s alpha release includes a bunch of great improvements in the following areas: Async language support is now available for queries and updates when running on .NET 4.5. Custom conventions now provide the ability to override the default conventions that Code First uses for mapping types, properties, etc. to your database. Multi-tenant migrations allow the same database to be used by multiple contexts with full Code First Migrations support for independently evolving the model backing each context. Using Enumerable.Contains in a LINQ query is now handled much more efficiently by EF and the SQL Server provider resulting greatly improved performance. All features of EF6 (except async) are available on both .NET 4 and .NET 4.5. This includes support for enums and spatial types and the performance improvements that were previously only available when using .NET 4.5. Start-up time for many large models has been dramatically improved thanks to improved view generation performance. Below are some additional details about a few of the improvements above: Async Support .NET 4.5 introduced the Task-Based Asynchronous Pattern that uses the async and await keywords to help make writing asynchronous code easier. EF 6 now supports this pattern. This is great for ASP.NET applications as database calls made through EF can now be processed asynchronously – avoiding any blocking of worker threads. This can increase scalability on the server by allowing more requests to be processed while waiting for the database to respond. The following code shows an MVC controller that is querying a database for a list of location entities:     public class HomeController : Controller     {         LocationContext db = new LocationContext();           public async Task<ActionResult> Index()         {             var locations = await db.Locations.ToListAsync();               return View(locations);         }     } Notice above the call to the new ToListAsync method with the await keyword. When the web server reaches this code it initiates the database request, but rather than blocking while waiting for the results to come back, the thread that is processing the request returns to the thread pool, allowing ASP.NET to process another incoming request with the same thread. In other words, a thread is only consumed when there is actual processing work to do, allowing the web server to handle more concurrent requests with the same resources. A more detailed walkthrough covering async in EF is available with additional information and examples. Also a walkthrough is available showing how to use async in an ASP.NET MVC application. Custom Conventions When working with EF Code First, the default behavior is to map .NET classes to tables using a set of conventions baked into EF. For example, Code First will detect properties that end with “ID” and configure them automatically as primary keys. However, sometimes you cannot or do not want to follow those conventions and would rather provide your own. For example, maybe your primary key properties all end in “Key” instead of “Id”. Custom conventions allow the default conventions to be overridden or new conventions to be added so that Code First can map by convention using whatever rules make sense for your project. The following code demonstrates using custom conventions to set the precision of all decimals to 5. As with other Code First configuration, this code is placed in the OnModelCreating method which is overridden on your derived DbContext class:         protected override void OnModelCreating(DbModelBuilder modelBuilder)         {             modelBuilder.Properties<decimal>()                 .Configure(x => x.HasPrecision(5));           } But what if there are a couple of places where a decimal property should have a different precision? Just as with all the existing Code First conventions, this new convention can be overridden for a particular property simply by explicitly configuring that property using either the fluent API or a data annotation. A more detailed description of custom code first conventions is available here. Community Involvement I blogged a while ago about EF being released under an open source license.  Since then a number of community members have made contributions and these are included in EF6 alpha 2. Two examples of community contributions are: AlirezaHaghshenas contributed a change that increases the startup performance of EF for larger models by improving the performance of view generation. The change means that it is less often necessary to use of pre-generated views. UnaiZorrilla contributed the first community feature to EF: the ability to load all Code First configuration classes in an assembly with a single method call like the following: protected override void OnModelCreating(DbModelBuilder modelBuilder) {        modelBuilder.Configurations            .AddFromAssembly(typeof(LocationContext).Assembly); } This code will find and load all the classes that inherit from EntityTypeConfiguration<T> or ComplexTypeConfiguration<T> in the assembly where LocationContext is defined. This reduces the amount of coupling between the context and Code First configuration classes, and is also a very convenient shortcut for large models. Other upcoming features coming in EF 6 Lots of information about the development of EF6 can be found on the EF CodePlex site, including a roadmap showing the other features that are planned for EF6. One of of the nice upcoming features is connection resiliency, which will automate the process of retying database operations on transient failures common in cloud environments and with databases such as the Windows Azure SQL Database. Another often requested feature that will be included in EF6 is the ability to map stored procedures to query and update operations on entities when using Code First. Summary EF6 is the first open source release of Entity Framework being developed in CodePlex. The alpha 2 preview release of EF6 is now available on NuGet, and contains some really great features for you to try. The EF team are always looking for feedback from developers - especially on the new features such as custom Code First conventions and async support. To provide feedback you can post a comment on the EF6 alpha 2 announcement post, start a discussion or file a bug on the CodePlex site. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• Why JSF Matters (to You)

  - by reza_rahman

        "Those who have knowledge, don’t predict. Those who predict, don’t have knowledge."                                                                                                    – Lao Tzu You may have noticed Thoughtworks recently crowned the likes AngularJS, etc imminent successors to server-side web frameworks. They apparently also deemed it necessary to single out JSF for righteous scorn. I have to say as I was reading the analysis I couldn't help but remember they also promptly jumped on the Ruby, Rails, Clojure, etc bandwagon a good few years ago seemingly similarly crowing these dynamic languages imminent successors to Java. I remember thinking then as I do now whether the folks at Thoughtworks are really that much smarter than me or if they are simply more prone to the Hipster buzz of the day. I'll let you make the final call on that one. I also noticed mention of "J2EE" in the context of JSF and had to wonder how up-to-date or knowledgeable the person writing the analysis actually was given that the term was basically retired almost a decade ago. There's one thing that I am absolutely sure about though - as a long time pretty happy user of JSF, I had no choice but to speak up on what I believe JSF offers. If you feel the same way, I would encourage you to support the team behind JSF whose hard work you may have benefited from over the years. True to his outspoken character PrimeFaces lead Cagatay Civici certainly did not mince words making the case for the JSF ecosystem - his excellent write-up is well worth a read. He specifically pointed out the practical problems in going whole hog with bare metal JavaScript, CSS, HTML for many development teams. I'll admit I had to smile when I read his closing sentence as well as the rather cheerful comments to the post from actual current JSF/PrimeFaces users that are apparently supposed to be on a gloomy death march. In a similar vein, OmniFaces developer Arjan Tijms did a great job pointing out the fact that despite the extremely competitive server-side Java Web UI space, JSF seems to manage to always consistently come out in either the number one or number two spot over many years and many data sources - do give his well-written message in the JAX-RS user forum a careful read. I don't think it's really reasonable to expect this to be the case for so many years if JSF was not at least a capable if not outstanding technology. If fact if you've ever wondered, Oracle itself is one of the largest JSF users on the planet. As Oracle's Shay Shmeltzer explains in a recent JSF Central interview, many of Oracle's strategic products such as ADF, ADF Mobile and Fusion Applications itself is built on JSF. There are well over 3,000 active developers working on these codebases. I don't think anyone can think of a more compelling reason to make sure that a technology is as effective as possible for practical development under real world conditions. Standing on the shoulders of the above giants, I feel like I can be pretty brief in making my own case for JSF: JSF is a powerful abstraction that brings the original Smalltalk MVC pattern to web development. This means cutting down boilerplate code to the bare minimum such that you really can think of just writing your view markup and then simply wire up some properties and event handlers on a POJO. The best way to see what this really means is to compare JSF code for a pretty small case to other approaches. You should then multiply the additional work for the typical enterprise project to try to understand what the productivity trade-offs are. This is reason alone for me to personally never take any other approach seriously as my primary web UI solution unless it can match the sheer productivity of JSF. Thanks to JSF's focus on components from the ground-up JSF has an extremely strong ecosystem that includes projects like PrimeFaces, RichFaces, OmniFaces, ICEFaces and of course ADF Faces/Mobile. These component libraries taken together constitute perhaps the largest widget set ever developed and optimized for a single web UI technology. To begin to grasp what this really means, just briefly browse the excellent PrimeFaces showcase and think about the fact that you can readily use the widgets on that showcase by just using some simple markup and knowing near to nothing about AJAX, JavaScript or CSS. JSF has the fair and legitimate advantage of being an open vendor neutral standard. This means that no single company, individual or insular clique controls JSF - openness, transparency, accountability, plurality, collaboration and inclusiveness is virtually guaranteed by the standards process itself. You have the option to choose between compatible implementations, escape any form of lock-in or even create your own compatible implementation! As you might gather from the quote at the top of the post, I am not a fan of crystal ball gazing and certainly don't want to engage in it myself. Who knows? However far-fetched it may seem maybe AngularJS is the only future we all have after all. If that is the case, so be it. Unlike what you might have been told, Java EE is about choice at heart and it can certainly work extremely well as a back-end for AngularJS. Likewise, you are also most certainly not limited to just JSF for working with Java EE - you have a rich set of choices like Struts 2, Vaadin, Errai, VRaptor 4, Wicket or perhaps even the new action-oriented web framework being considered for Java EE 8 based on the work in Jersey MVC... Please note that any views expressed here are my own only and certainly does not reflect the position of Oracle as a company.

  Read the article

• FOUR questions to ask if you are implementing DATABASE-AS-A-SERVICE

  - by Sudip Datta

  During my ongoing tenure at Oracle, I have met all types of DBAs. Happy DBAs, unhappy DBAs, proud DBAs, risk-loving DBAs, cautious DBAs. These days, as Database-as-a-Service (DBaaS) becomes more mainstream, I find some complacent DBAs who are basking in their achievement of having implemented DBaaS. Some others, however, are not that happy. They grudgingly complain that they did not have much of a say in the implementation, they simply had to follow what their cloud architects (mostly infrastructure admins) offered them. In most cases it would be a database wrapped inside a VM that would be labeled as “Database as a Service”. In other cases, it would be existing brute-force automation simply exposed in a portal. As much as I think that there is more to DBaaS than those approaches and often get tempted to propose Enterprise Manager 12c, I try to be objective. Neither do I want to dampen the spirit of the happy ones, nor do I want to stoke the pain of the unhappy ones. As I mentioned in my previous post, I don’t deny vanilla automation could be useful. I like virtualization too for what it has helped us accomplish in terms of resource management, but we need to scrutinize its merit on a case-by-case basis and apply it meaningfully. For DBAs who either claim to have implemented DBaaS or are planning to do so, I simply want to provide four key questions to ponder about: 1. Does it make life easier for your end users? Database-as-a-Service can have several types of end users. Junior DBAs, QA Engineers, Developers- each having their own skillset. The objective of DBaaS is to make their life simple, so that they can focus on their core responsibilities without having to worry about additional stuff. For example, if you are a Developer using Oracle Application Express (APEX), you want to deal with schema, objects and PL/SQL code and not with datafiles or listener configuration. If you are a QA Engineer needing database copies for functional testing, you do not want to deal with underlying operating system patching and compliance issues. The question to ask, therefore, is, whether DBaaS makes life easier for those users. It is often convenient to give them VM shells to deal with a la Amazon EC2 IaaS, but is that what they really want? Is it a productive use of a developer's time if he needs to apply RPM errata to his Linux operating system. Asking him to keep the underlying operating system current is like making a guest responsible for a restaurant's decor. 2. Does it make life easier for your administrators? Cloud, in general, is supposed to free administrators from attending to mundane tasks like provisioning services for every single end user request. It is supposed to enable a readily consumable platform and enforce standardization in the process. For example, if a Service Catalog exposes DBaaS of specific database versions and configurations, it, by its very nature, enforces certain discipline and standardization within the IT environment. What if, instead of specific database configurations, cloud allowed each end user to create databases of their liking resulting in hundreds of version and patch levels and thousands of individual databases. Therefore the right question to ask is whether the unwanted consequence of DBaaS is OS and database sprawl. And if so, who is responsible for tracking them, backing them up, administering them? Studies have shown that these administrative overheads increase exponentially with new targets, and it could result in a management nightmare. That leads us to our next question. 3. Does it satisfy your Security Officers and Compliance Auditors? Compliance Auditors need to know who did what and when. They also want the cloud platform to be secure, so that end users have little freedom in tampering with it. Dealing with VM sprawl is not the easiest of challenges, let alone dealing with them as they keep getting reconfigured and moved around. This leads to the proverbial needle in the haystack problem, and all it needs is one needle to cause a serious compliance issue in the enterprise. Bottomline is, flexibility and agility should not come at the expense of compliance and it is very important to get the balance right. Can we have security and isolation without creating compliance challenges? Instead of a ‘one size fits all approach’ i.e. OS level isolation, can we think smartly about database isolation or schema based isolation? This is where the appropriate resource modeling needs to be applied. The usual systems management vendors out there with heterogeneous common-denominator approach have compromised on these semantics. If you follow Enterprise Manager’s DBaaS solution, you will see that we have considered different models, not precluding virtualization, for different customer use cases. The judgment to use virtual assemblies versus databases on physical RAC versus Schema-as-a-Service in a single database, should be governed by the need of the applications and not by putting compliance considerations in the backburner. 4. Does it satisfy your CIO? Finally, does it satisfy your higher ups? As the sponsor of cloud initiative, the CIO is expected to lead an IT transformation project, not merely a run-of-the-mill IT operations. Simply virtualizing server resources and delivering them through self-service is a good start, but hardly transformational. CIOs may appreciate the instant benefit from server consolidation, but studies have revealed that the ROI from consolidation would flatten out at 20-25%. The question would be: what next? As we go higher up in the stack, the need to virtualize, segregate and optimize shifts to those layers that are more palpable to the business users. As Sushil Kumar noted in his blog post, " the most important thing to note here is the enterprise private cloud is not just an IT project, rather it is a business initiative to create an IT setup that is more aligned with the needs of today's dynamic and highly competitive business environment." Business users could not care less about infrastructure consolidation or virtualization - they care about business agility and service level assurance. Last but not the least, lot of CIOs get miffed if we ask them to throw away their existing hardware investments for implementing DBaaS. In Oracle, we always emphasize on freedom of choosing a platform; hence Enterprise Manager’s DBaaS solution is platform neutral. It can work on any Operating System (that the agent is certified on) Oracle’s hardware as well as 3rd party hardware. As a parting note, I urge you to remember these 4 questions. Remember that your satisfaction as an implementer lies in the satisfaction of others.

  Read the article

• Using xsl:variable in a xsl:foreach select statment

  - by Nefariousity

  I'm trying to iterate through an xml document using xsl:foreach but I need the select=" " to be dynamic so I'm using a variable as the source. Here's what I've tried: ... <xsl:template name="SetDataPath"> <xsl:param name="Type" /> <xsl:variable name="Path_1">/Rating/Path1/*</xsl:variable> <xsl:variable name="Path_2">/Rating/Path2/*</xsl:variable> <xsl:if test="$Type='1'"> <xsl:value-of select="$Path_1"/> </xsl:if> <xsl:if test="$Type='2'"> <xsl:value-of select="$Path_2"/> </xsl:if> <xsl:template> ... <!-- Set Data Path according to Type --> <xsl:variable name="DataPath"> <xsl:call-template name="SetDataPath"> <xsl:with-param name="Type" select="/Rating/Type" /> </xsl:call-template> </xsl:variable> ... <xsl:for-each select="$DataPath"> ... The foreach threw an error stating: "XslTransformException - To use a result tree fragment in a path expression, first convert it to a node-set using the msxsl:node-set() function." When I use the msxsl:node-set() function though, my results are blank. I'm aware that I'm setting $DataPath to a string, but shouldn't the node-set() function be creating a node set from it? Am I missing something? When I don't use a variable: <xsl:for-each select="/Rating/Path1/*"> I get the proper results. Here's the XML data file I'm using: <Rating> <Type>1</Type> <Path1> <sarah> <dob>1-3-86</dob> <user>Sarah</user> </sarah> <joe> <dob>11-12-85</dob> <user>Joe</user> </joe> </Path1> <Path2> <jeff> <dob>11-3-84</dob> <user>Jeff</user> </jeff> <shawn> <dob>3-5-81</dob> <user>Shawn</user> </shawn> </Path2> </Rating> My question is simple, how do you run a foreach on 2 different paths?

  Read the article

• WPF Styles and Tooltips Question

  - by A.R.

  I have a style that I am using to make dynamic tooltips on certain text boxes like so. <Style TargetType="{x:Type TextBox}"> <Setter Property="MinWidth" Value="100"/> <Style.Triggers> <Trigger Property="Validation.HasError" Value="True"> <!-- item of interest --> <Setter Property="ToolTip"> <Setter.Value> <MultiBinding Converter="{StaticResource ErrorMessageConverter}"> <Binding RelativeSource="{RelativeSource Self}" Path="Tag"/> </MultiBinding> </Setter.Value> </Setter> </Trigger> </Style.Triggers> </Style> This works very well, but if I want to use a more complex tooltip I can't figure out how to bind to 'Tag' anymore for the converter value. For example; ... <Setter Property="ToolTip"> <Setter.Value> <StackPanel> <TextBlock> <TextBlock.Text> <MultiBinding Converter="{StaticResource ErrorMessageConverter}"> <!-- item of interest --> <Binding RelativeSource=" what goes here?? "/> </MultiBinding> </TextBlock.Text> </TextBlock> <Image/> </StackPanel> </Setter.Value> </Setter> ... I have tried several flavors of 'FindAncestor' and what not for the relative source, but I can't get anything to work. Any ideas?? UPDATE: 12-29-2010 : Here is the correct code, answer provided by our friend Goblin below. Works perfectly! ... <Setter Property="ToolTip"> <Setter.Value> <!-- Item of interest --> <ToolTip DataContext="{Binding Path=PlacementTarget, RelativeSource={x:Static RelativeSource.Self}}"> <StackPanel> <Image/> <TextBlock> <TextBlock.Text> <MultiBinding Converter="{StaticResource ErrorMessageConverter}"> <Binding Path="Tag"/> </MultiBinding> </TextBlock.Text> </TextBlock> </StackPanel> </ToolTip> </Setter.Value> </Setter> ...

  Read the article

• Complex SQL query help on aggregating values for nested subquery

  - by François Beausoleil

  Hi! I have people, companies, employees, events and event kinds. I'm making a report/followup sheet where people, companies and employees are the rows, and the columns are event kinds. Event kinds are simple values describing: "Promised Donation", "Received Donation", "Phoned", "Followed up" and such. Event kinds are ordered: CREATE TABLE event_kinds ( id, name, position); Events hold the actual reference to the event: CREATE TABLE events ( id, person_id, company_id, referrer_id, event_kind_id, created_at); referrer_id is another reference to people. It is the person which sent the information/tip along, and is an optional field, although I sometimes want to filter on an event_kind that has a specific referrer, while I don't for other event kinds. Notice I don't have an employee ID reference. The reference exists, but is implied. I have application code to validate that person_id and company_id really reference an employee record. The other tables are pretty basic: CREATE TABLE people ( id, name); CREATE TABLE companies ( id, name); CREATE TABLE employees ( id, person_id, company_id); I'm trying to achieve the following report: Referrer Phoned Promised Donated Francois Feb 16th Feb 20th Mar 1st Apple (Steve Jobs) Steve Ballmer Mar 3rd IBM Bill Gates Mar 7th The first row is a people record, the 2nd is an employee, and the 3rd is a company. If I asked for referrer Bill Gates for Phoned event kinds, I'd only see the 3rd row, while asking for Steve and Phoned would return no rows. Right now, I do 3 queries, one for companies, one for people and a last one for employees. I want the event kind columns to be ordered, but I do that in application code and show it properly there. Here's where I'm at so far: SELECT companies.id, companies.name, (SELECT events.id FROM events WHERE events.referrer_id = 1470 AND events.company_id = companies.id AND events.person_id IS NULL AND events.event_kind_id = 9 ORDER BY created_at DESC LIMIT 1) event_kind_9, (SELECT events.id FROM events WHERE events.company_id = companies.id AND events.person_id IS NULL AND events.event_kind_id = 10 ORDER BY created_at DESC LIMIT 1) event_kind_10, (SELECT events.created_at FROM events WHERE events.referrer_id = 1470 AND events.company_id = companies.id AND events.person_id IS NULL AND events.event_kind_id = 9 ORDER BY created_at DESC LIMIT 1) event_kind_9_order FROM "companies" SELECT people.id, people.name, (SELECT events.id FROM events WHERE events.referrer_id = 1470 AND events.company_id IS NULL AND events.person_id = people.id AND events.event_kind_id = 9 ORDER BY created_at DESC LIMIT 1) event_kind_9, (SELECT events.id FROM events WHERE events.company_id IS NULL AND events.person_id = people.id AND events.event_kind_id = 10 ORDER BY created_at DESC LIMIT 1) event_kind_10, (SELECT events.created_at FROM events WHERE events.referrer_id = 1470 AND events.company_id IS NULL AND events.person_id = people.id AND events.event_kind_id = 9 ORDER BY created_at DESC LIMIT 1) event_kind_9_order FROM "people" SELECT employees.id, employees.company_id, employees.person_id, (SELECT events.id FROM events WHERE events.referrer_id = 1470 AND events.company_id = employees.company_id AND events.person_id = employees.person_id AND events.event_kind_id = 9 ORDER BY created_at DESC LIMIT 1) event_kind_9, (SELECT events.id FROM events WHERE events.company_id = employees.company_id AND events.person_id = employees.person_id AND events.event_kind_id = 10 ORDER BY created_at DESC LIMIT 1) event_kind_10, (SELECT events.created_at FROM events WHERE events.referrer_id = 1470 AND events.company_id = employees.company_id AND events.person_id = employees.person_id AND events.event_kind_id = 9 ORDER BY created_at DESC LIMIT 1) event_kind_9_order FROM "employees" I rather suspect I'm doing this wrong. There should be an "easier" way to do it. One other filter criteria would be to filter on people/company names: WHERE LOWER(companies.name) LIKE '%apple%'. Note that I'm ordering by the dates of event_kind_9 here, and a secondary sort is by person/company name. To summarize: I want to paginate the result set, find the latest event for each cell, order the result set by the date of the latest event, and by company/person name, filter by referrer in some event kinds, but not others. For reference, I'm using PostgreSQL, from Ruby, ActiveRecord/Rails. The solution is pure SQL though.

  Read the article

• Migrate from MySQL to PostgreSQL on Linux (Kubuntu)

  - by Dave Jarvis

  A long time ago in a galaxy far, far away... Trying to migrate a database from MySQL to PostgreSQL. All the documentation I have read covers, in great detail, how to migrate the structure. I have found very little documentation on migrating the data. The schema has 13 tables (which have been migrated successfully) and 9 GB of data. MySQL version: 5.1.x PostgreSQL version: 8.4.x I want to use the R programming language to analyze the data using SQL select statements; PostgreSQL has PL/R, but MySQL has nothing (as far as I can tell). A New Hope Create the database location (/var has insufficient space; also dislike having the PostgreSQL version number everywhere -- upgrading would break scripts!): sudo mkdir -p /home/postgres/main sudo cp -Rp /var/lib/postgresql/8.4/main /home/postgres sudo chown -R postgres.postgres /home/postgres sudo chmod -R 700 /home/postgres sudo usermod -d /home/postgres/ postgres All good to here. Next, restart the server and configure the database using these installation instructions: sudo apt-get install postgresql pgadmin3 sudo /etc/init.d/postgresql-8.4 stop sudo vi /etc/postgresql/8.4/main/postgresql.conf Change data_directory to /home/postgres/main sudo /etc/init.d/postgresql-8.4 start sudo -u postgres psql postgres \password postgres sudo -u postgres createdb climate pgadmin3 Use pgadmin3 to configure the database and create a schema. The episode continues in a remote shell known as bash, with both databases running, and the installation of a set of tools with a rather unusual logo: SQL Fairy. perl Makefile.PL sudo make install sudo apt-get install perl-doc (strangely, it is not called perldoc) perldoc SQL::Translator::Manual Extract a PostgreSQL-friendly DDL and all the MySQL data: sqlt -f DBI --dsn dbi:mysql:climate --db-user user --db-password password -t PostgreSQL > climate-pg-ddl.sql mysqldump --skip-add-locks --complete-insert --no-create-db --no-create-info --quick --result-file="climate-my.sql" --databases climate --skip-comments -u root -p The Database Strikes Back Recreate the structure in PostgreSQL as follows: pgadmin3 (switch to it) Click the Execute arbitrary SQL queries icon Open climate-pg-ddl.sql Search for TABLE " replace with TABLE climate." (insert the schema name climate) Search for on " replace with on climate." (insert the schema name climate) Press F5 to execute This results in: Query returned successfully with no result in 122 ms. Replies of the Jedi At this point I am stumped. Where do I go from here (what are the steps) to convert climate-my.sql to climate-pg.sql so that they can be executed against PostgreSQL? How to I make sure the indexes are copied over correctly (to maintain referential integrity; I don't have constraints at the moment to ease the transition)? How do I ensure that adding new rows in PostgreSQL will start enumerating from the index of the last row inserted (and not conflict with an existing primary key from the sequence)? How do you ensure the schema name comes through when transforming the data from MySQL to PostgreSQL inserts? Resources A fair bit of information was needed to get this far: https://help.ubuntu.com/community/PostgreSQL http://articles.sitepoint.com/article/site-mysql-postgresql-1 http://wiki.postgresql.org/wiki/Converting_from_other_Databases_to_PostgreSQL#MySQL http://pgfoundry.org/frs/shownotes.php?release_id=810 http://sqlfairy.sourceforge.net/ Thank you!

  Read the article

• NHibernate which cache to use for WinForms application

  - by chiccodoro

  I have a C# WinForms application with a database backend (oracle) and use NHibernate for O/R mapping. I would like to reduce communication to the database as much as possible since the network in here is quite slow, so I read about second level caching. I found this quite good introduction, which lists the following available cache implementations. I'm wondering which implementation I should use for my application. The caching should be simple, it should not significantly slow down the first occurrence of a query, and it should not take much memory to load the implementing assemblies. (With NHibernate and Castle, the application already takes up to 80 MB of RAM!) Velocity: uses Microsoft Velocity which is a highly scalable in-memory application cache for all kinds of data. Prevalence: uses Bamboo.Prevalence as the cache provider. Bamboo.Prevalence is a .NET implementation of the object prevalence concept brought to life by Klaus Wuestefeld in Prevayler. Bamboo.Prevalence provides transparent object persistence to deterministic systems targeting the CLR. It offers persistent caching for smart client applications. SysCache: Uses System.Web.Caching.Cache as the cache provider. This means that you can rely on ASP.NET caching feature to understand how it works. SysCache2: Similar to NHibernate.Caches.SysCache, uses ASP.NET cache. This provider also supports SQL dependency-based expiration, meaning that it is possible to configure certain cache regions to automatically expire when the relevant data in the database changes. MemCache: uses memcached; memcached is a high-performance, distributed memory object caching system, generic in nature, but intended for use in speeding up dynamic web applications by alleviating database load. Basically a distributed hash table. SharedCache: high-performance, distributed and replicated memory object caching system. See here and here for more info My considerations so far were: Velocity seems quite heavyweight and overkill (the files totally take 467 KB of disk space, haven't measured the RAM it takes so far because I didn't manage to make it run, see below) Prevalence, at least in my first attempt, slowed down my query from ~0.5 secs to ~5 secs, and caching didn't work (see below) SysCache seems to be for ASP.NET, not for winforms. MemCache and SharedCache seem to be for distributed scenarios. Which one would you suggest me to use? There would also be a built-in implementation, which of course is very lightweight, but the referenced article tells me that I "(...) should never use this cache provider for production code but only for testing." Besides the question which fits best into my situation I also faced problems with applying them: Velocity complained that "dcacheClient" tag not specified in the application configuration file. Specify valid tag in configuration file," although I created an app.config file for the assembly and pasted the example from this article. Prevalence, as mentioned above, heavily slowed down my first query, and the next time the exact same query was executed, another select was sent to the database. Maybe I should "externalize" this topic into another post. I will do that if someone tells me it is absolutely unusual that a query is slowed down so much and he needs further details to help me.

  Read the article

• VS2010 Assembly Load Error

  - by Nate

  I am getting the following error when I try to build an ASP.NET 4 project in Visual Studio 2010: "Could not load file or assembly 'file:///C:\Dev\project\trunk\bin\Elmah.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515)". I have verified that the dll does, in fact, exist, and is getting copied to the bin folder correctly. I have also tried removing and then re-adding the reference to the project. The build only fails when I switch the Solution Configuration to "Release". It does not fail when the Solution Configuration is set to "Debug". The only difference between the two configurations (that I know of) is shown in the following Web.config transform, Web.Release.config: <?xml version="1.0"?> <configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform"> <connectionStrings> <add name="SqlServer" connectionString="" providerName="System.Data.SqlClient" xdt:Transform="SetAttributes" xdt:Locator="Match(name)"/> </connectionStrings> <system.web> <compilation xdt:Transform="RemoveAttributes(debug)" /> <customErrors mode="On" xdt:Transform="Replace"> <error statusCode="404" redirect="lost.htm" /> <error statusCode="500" redirect="uhoh.htm" /> </customErrors> </system.web> </configuration> I have tried using Fusion Log Viewer to track down the assembly binding issue, but it looks like it is finding and loading the assembly correctly. Here is the log: *** Assembly Binder Log Entry (6/8/2010 @ 10:01:54 AM) *** The operation was successful. Bind result: hr = 0x0. The operation completed successfully. Assembly manager loaded from: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll Running under executable c:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\bin\NETFX 4.0 Tools\sgen.exe --- A detailed error log follows. === Pre-bind state information === LOG: User = User LOG: Where-ref bind. Location = C:\Dev\project\trunk\bin\Elmah.dll LOG: Appbase = file:///c:/Program Files (x86)/Microsoft SDKs/Windows/v7.0A/bin/NETFX 4.0 Tools/ LOG: Initial PrivatePath = NULL LOG: Dynamic Base = NULL LOG: Cache Base = NULL LOG: AppName = sgen.exe Calling assembly : (Unknown). === LOG: This bind starts in LoadFrom load context. WRN: Native image will not be probed in LoadFrom context. Native image will only be probed in default load context, like with Assembly.Load(). LOG: No application configuration file found. LOG: Using host configuration file: LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config. LOG: Attempting download of new URL file:///C:/Dev/project/trunk/bin/Elmah.dll. LOG: Assembly download was successful. Attempting setup of file: C:\Dev\project\trunk\bin\Elmah.dll LOG: Entering run-from-source setup phase. LOG: Assembly Name is: Elmah, Version=1.1.11517.0, Culture=neutral, PublicKeyToken=null LOG: Re-apply policy for where-ref bind. LOG: Where-ref bind Codebase does not match what is found in default context. Keep the result in LoadFrom context. LOG: Binding succeeds. Returns assembly from C:\Dev\project\trunk\bin\Elmah.dll. LOG: Assembly is loaded in LoadFrom load context. I feel like there is a fundamental lack of understanding on my part as to what exactly is going on here. Any explanation/help is much appreciated!

  Read the article

• Facebook require_login() in iFrame App

  - by LapKom

  Hi, I have serious problem with iframe application. I need to use many external JS libraries and other dynamic stuuf so FMBL application can't be done. When I call require_login() I get applicaition installing dialog when app is not already installed, which is ok. But then after authorization application enters an endless redirect loop with parameters like auth_token, installed and so. Yesterday I managed to fix this, but today it's broken again... What the heck is happening with FB? It's driving me crazy to find a sollution, none of ones found on net doesn't seem to be working. So far I tried: http://abhirama.wordpress.com/2010/03/07/facebook-iframe-xfbml-app/ (7th march 2010!) http://forum.developers.facebook.com/viewtopic.php?pid=156092 http://www.keywordintellect.com/facebook-development/how-to-set-up-a-facebook-iframe-application-in-php-in-5-minutes/ http://www.markdeepwell.com/2010/02/validating-a-facebook-session-within-an-iframe/ http://forum.developers.facebook.com/viewtopic.php?pid=210449 http://www.ajaxlines.com/ajax/stuff/article/facebook_fbml_rendering_in_iframe_application.php http://www.aratide.com/php/solving-the-break-out-issue-in-iframe-facebook-applications/ None of the above worked... According to those and some FB docs: http://wiki.developers.facebook.com/index.php/FB_RequireFeatures http://wiki.developers.facebook.com/index.php/Cross_Domain_Communication_Channel My example test files look as follow: <?php //Link in library. require_once '../application/vendor/Facebook/facebook.php'; //Authentication Keys $appapikey = 'XXXX'; $appsecret = 'XXXX'; //Construct the class $facebook = new Facebook($appapikey, $appsecret); //Require login $user_id = $facebook->require_login(); ?> <html xmlns="http://www.w3.org/1999/xhtml" xmlns:fb="http://www.facebook.com/2008/fbml"> <head> <title></title> </head> <body> <script src="http://static.ak.facebook.com/js/api_lib/v0.4/FeatureLoader.js.php" type="text/javascript"></script> This is you: <fb:name uid="<?php echo $user_id?>"></fb:name> <?php var_dump($facebook->$this->facebook->api_client->friends_get())?> <script type="text/javascript"> FB_RequireFeatures(["XFBML"], function(){ FB.Facebook.init("<?=$appapikey?>", "xd_receiver.html"); }); </script> </body> </html> And cross-domain file xd_receiver.html is: <!doctype html public "-//w3c//dtd xhtml 1.0 strict//en" "http://www.w3.org/tr/xhtml1/dtd/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head> <title>cross-domain receiver page</title> </head> <body> <script src="http://static.ak.facebook.com/js/api_lib/v0.4/XdCommReceiver.js" type="text/javascript"></script> </body> </html> How do I get it working? I'm using Kohana framework to do this and already replaced header('Location') with url::redirect() in facebook php library.

  Read the article

• Why does my sharepoint web part event handler lose the sender value on postback?

  - by vishal shah

  I have a web part which is going to be a part of pair of connected web parts. For simplicity, I am just describing the consumer web part. This web part has 10 link buttons on it. And they are rendered in the Render method instead ofCreateChildControls as this webpart will be receiving values based on input from the provider web part. Each Link Button has a text which is decided dynamically based on the input from provider web part. When I click on any of the Link Buttons, the event handler is triggered but the text on the Link Button shows up as the one set in CreateChildControls. When I trace the code, I see that the CreateChildControls gets called before the event handler (and i think that resets my Link Buttons). How do I get the event handler to show me the dynamic text instead? Here is the code... public class consWebPart : Microsoft.SharePoint.WebPartPages.WebPart { private bool _error = false; private LinkButton[] lkDocument = null; public consWebPart() { this.ExportMode = WebPartExportMode.All; } protected override void CreateChildControls() { if (!_error) { try { base.CreateChildControls(); lkDocument = new LinkButton[101]; for (int i = 0; i < 10; i++) { lkDocument[i] = new LinkButton(); lkDocument[i].ID = "lkDocument" + i; lkDocument[i].Text = "Initial Text"; lkDocument[i].Style.Add("margin", "10 10 10 10px"); this.Controls.Add(lkDocument[i]); lkDocument[i].Click += new EventHandler(lkDocument_Click); } } catch (Exception ex) { HandleException(ex); } } } protected override void Render(HtmlTextWriter writer) { writer.Write("<table><tr>"); for (int i = 0; i < 10; i++) { writer.Write("<tr>"); lkDocument[i].Text = "LinkButton" + i; writer.Write("<td>"); lkDocument[i].RenderControl(writer); writer.Write("</td>"); writer.Write("</tr>"); } writer.Write("</table>"); } protected void lkDocument_Click(object sender, EventArgs e) { string strsender = sender.ToString(); LinkButton lk = (LinkButton)sender; } protected override void OnLoad(EventArgs e) { if (!_error) { try { base.OnLoad(e); this.EnsureChildControls(); } catch (Exception ex) { HandleException(ex); } } } private void HandleException(Exception ex) { this._error = true; this.Controls.Clear(); this.Controls.Add(new LiteralControl(ex.Message)); } }

  Read the article

• Cisco PIX 8.0.4, static address mapping not working?

  - by Bill

  upgrading a working Pix running 5.3.1 to 8.0.4. The memory/IOS upgrade went fine, but the 8.0.4 configuration is not quite working 100%. The 5.3.1 config on which it was based is working fine. Basically, I have three networks (inside, outside, dmz) with some addresses on the dmz statically mapped to outside addresses. The problem seems to be that those addresses can't send or receive traffic from the outside (Internet.) Stuff on the DMZ that does not have a static mapping seems to work fine. So, basically: Inside - outside: works Inside - DMZ: works DMZ - inside: works, where the rules allow it DMZ (non-static) - outside: works But: DMZ (static) - outside: fails Outside - DMZ: fails (So, say, udp 1194 traffic to .102, http to .104) I suspect there's something I'm missing with the nat/global section of the config, but can't for the life of me figure out what. Help, anyone? The complete configuration is below. Thanks for any thoughts! ! PIX Version 8.0(4) ! hostname firewall domain-name asasdkpaskdspakdpoak.com enable password xxxxxxxx encrypted passwd xxxxxxxx encrypted names ! interface Ethernet0 nameif outside security-level 0 ip address XX.XX.XX.100 255.255.255.224 ! interface Ethernet1 nameif inside security-level 100 ip address 192.168.68.1 255.255.255.0 ! interface Ethernet2 nameif dmz security-level 10 ip address 192.168.69.1 255.255.255.0 ! boot system flash:/image.bin ftp mode passive dns server-group DefaultDNS domain-name asasdkpaskdspakdpoak.com access-list acl_out extended permit udp any host XX.XX.XX.102 eq 1194 access-list acl_out extended permit tcp any host XX.XX.XX.104 eq www access-list acl_dmz extended permit tcp host 192.168.69.10 host 192.168.68.17 eq ssh access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 192.168.68.0 255.255.255.0 eq ssh access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 192.168.68.0 255.255.255.0 eq 5901 access-list acl_dmz extended permit udp host 192.168.69.103 any eq ntp access-list acl_dmz extended permit udp host 192.168.69.103 any eq domain access-list acl_dmz extended permit tcp host 192.168.69.103 any eq www access-list acl_dmz extended permit tcp host 192.168.69.100 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.100 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.101 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.101 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.104 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.104 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.69.104 eq 8080 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.69.104 eq 8099 access-list acl_dmz extended permit tcp host 192.168.69.105 any eq www access-list acl_dmz extended permit tcp host 192.168.69.103 any eq smtp access-list acl_dmz extended permit tcp host 192.168.69.105 host 192.168.68.103 eq ssh access-list acl_dmz extended permit tcp host 192.168.69.104 any eq www access-list acl_dmz extended permit tcp host 192.168.69.100 any eq www access-list acl_dmz extended permit tcp host 192.168.69.100 any eq https pager lines 24 mtu outside 1500 mtu inside 1500 mtu dmz 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 static (dmz,outside) XX.XX.XX.103 192.168.69.11 netmask 255.255.255.255 static (inside,dmz) 192.168.68.17 192.168.68.17 netmask 255.255.255.255 static (inside,dmz) 192.168.68.100 192.168.68.100 netmask 255.255.255.255 static (inside,dmz) 192.168.68.101 192.168.68.101 netmask 255.255.255.255 static (inside,dmz) 192.168.68.102 192.168.68.102 netmask 255.255.255.255 static (inside,dmz) 192.168.68.103 192.168.68.103 netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.104 192.168.69.100 netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.105 192.168.69.105 netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.102 192.168.69.10 netmask 255.255.255.255 access-group acl_out in interface outside access-group acl_dmz in interface dmz route outside 0.0.0.0 0.0.0.0 XX.XX.XX.97 1 route dmz 10.71.83.0 255.255.255.0 192.168.69.10 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute dynamic-access-policy-record DfltAccessPolicy no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 192.168.68.17 255.255.255.255 inside telnet timeout 5 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! service-policy global_policy global prompt hostname context Cryptochecksum:2d1bb2dee2d7a3e45db63a489102d7de

  Read the article

• pdfptable format problem?

  - by raj

  Hi, I am using the code below to convert Html string to PDF.I notice that at times, it does print the tables in PDF but no styles(no border, color etc..).Below is the html string: Can anyone suggest me where am I missing something? Hi userThe Message ID 56456 has been assigned to you for Edition. AUTO VERIFY FOR CONGROUP cccccccc FAILEDSSID ssss message, RPTD BY rrrrSSID ssss RLD ll message, RPTD BY rrrrSSID ssss DEV ddd message, RPTD BY rrrr Table 12 EMC9998W message format <table style="border: medium solid #00FF00; width:100%; table-layout: auto; visibility: visible;" title="EMC9998W message format"> <tr> <td> <b>Exception code</b></td> <td> <b>Meaning</b></td> <td> <b>Message format</b></td> </tr> <tr> <td > 1460 </td> <td> DYNAMIC SPARING INVOKED</td> <td> 1</td> </tr> <tr> <td > 147D REMOTE </td> <td > LINK DIRECTOR PROBLEM/FAILURE</td> <td> 2</td> </tr> </table> Where MSG FORMAT 1 EMC9998W SSID ssss message, RPTD BY rrrr MSG FORMAT 2 EMC9998W SSID ssss message, RPTD BY rrrr MSG FORMAT 3 EMC9998W SSID ssss message, RPTD BY rrrr private void HtmltoPdf(string s, Paragraph p,Document doc) { string strLine = s; byte[] byteArray = Encoding.ASCII.GetBytes(strLine); MemoryStream stream = new MemoryStream(byteArray); StreamReader reader2 = new StreamReader(stream); StringReader sr2 = new StringReader(reader2.ReadToEnd()); iTextSharp.text.html.simpleparser.HTMLWorker worker = new HTMLWorker(doc); ArrayList elementlist = HTMLWorker.ParseToList(sr2, null); Phrase ph = new Phrase(); for (int k = 0; k < elementlist.Count; ++k) { IElement ielement = (IElement)elementlist[k]; ArrayList chunks = ielement.Chunks; if (ielement.Type == Element.PTABLE) { PdfPTable pt = (PdfPTable)ielement; pt.DefaultCell.Border = 2; PdfPTable t = new PdfPTable(1);//(new float[] {1f,1f,1f}); ph.Add(t); PdfPCell pcell = new PdfPCell(new Paragraph(ph)); t.AddCell(pcell); p.Add(t); foreach (PdfPRow row in t.Rows) { } } else if (ielement.Type == Element.LIST) { } else { ph.Clear(); ph.Add((IElement)elementlist[k]); p.Add(new Paragraph(ph)); } } sr2.Close(); reader2.Close(); stream.Close(); }

  Read the article

• MySQL is hogging my server resources

  - by Reacen

  Does anyone have any idea of what can cause this weird behaviour and how I go about fixing it? This is all coming from MySQL only (both RAM and CPU usage), for about 10 minutes after I reboot my Java game server (that has a pool of 256 connections). There are not that many queries and I think it may be more of a MySQL misconfiguration problem. My server: 3.20 GHz * 6 core / 24 GB RAM / 64 bit Windows Server 2003. My game server: Java server, with 256 MySQL connections pool (MyISAM engine), about 500,000 accounts, and 9 million rows of game items in database and about 3,000 players are connected. After about 15 minutes of the game server reboot, the server resumes its stability and CPU usage drop down to 1% ~ 5% and memory to 6 GB. Here is a copy of my MySQL configuration. Also, any advice about my MySQL configuration will be appreciated. I really set it up almost at random. # Example MySQL config file for very large systems. # # This is for a large system with memory of 1G-2G where the system runs mainly # MySQL. # # You can copy this file to # /etc/my.cnf to set global options, # mysql-data-dir/my.cnf to set server-specific options (in this # installation this directory is C:\mysql\data) or # ~/.my.cnf to set user-specific options. # # In this file, you can use all long options that a program supports. # If you want to know which options a program supports, run the program # with the "--help" option. # The following options will be passed to all MySQL clients [client] #password = your_password port = 3306 socket = /tmp/mysql.sock # Here follows entries for some specific programs # The MySQL server [mysqld] #log=c:\mysql.log port = 3306 socket = /tmp/mysql.sock skip-locking key_buffer_size = 2572M max_allowed_packet = 64M table_open_cache = 512 sort_buffer_size = 128M read_buffer_size = 128M read_rnd_buffer_size = 128M myisam_sort_buffer_size = 500M thread_cache_size = 32 query_cache_size = 1948M # Try number of CPU's*2 for thread_concurrency thread_concurrency = 12 max_connections = 5000 # Don't listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (via the "enable-named-pipe" option) will render mysqld useless! # #skip-networking # Replication Master Server (default) # binary logging is required for replication log-bin=mysql-bin # required unique id between 1 and 2^32 - 1 # defaults to 1 if master-host is not set # but will not function as a master if omitted server-id = 1 # Replication Slave (comment out master section to use this) # # To configure this host as a replication slave, you can choose between # two methods : # # 1) Use the CHANGE MASTER TO command (fully described in our manual) - # the syntax is: # # CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>, # MASTER_USER=<user>, MASTER_PASSWORD=<password> ; # # where you replace <host>, <user>, <password> by quoted strings and # <port> by the master's port number (3306 by default). # # Example: # # CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306, # MASTER_USER='joe', MASTER_PASSWORD='secret'; # # OR # # 2) Set the variables below. However, in case you choose this method, then # start replication for the first time (even unsuccessfully, for example # if you mistyped the password in master-password and the slave fails to # connect), the slave will create a master.info file, and any later # change in this file to the variables' values below will be ignored and # overridden by the content of the master.info file, unless you shutdown # the slave server, delete master.info and restart the slaver server. # For that reason, you may want to leave the lines below untouched # (commented) and instead use CHANGE MASTER TO (see above) # # required unique id between 2 and 2^32 - 1 # (and different from the master) # defaults to 2 if master-host is set # but will not function as a slave if omitted #server-id = 2 # # The replication master for this slave - required #master-host = <hostname> # # The username the slave will use for authentication when connecting # to the master - required #master-user = <username> # # The password the slave will authenticate with when connecting to # the master - required #master-password = <password> # # The port the master is listening on. # optional - defaults to 3306 #master-port = <port> # # binary logging - not required for slaves, but recommended #log-bin=mysql-bin # # binary logging format - mixed recommended #binlog_format=mixed # Point the following paths to different dedicated disks #tmpdir = /tmp/ #log-update = /path-to-dedicated-directory/hostname # Uncomment the following if you are using InnoDB tables #innodb_data_home_dir = C:\mysql\data/ #innodb_data_file_path = ibdata1:2000M;ibdata2:10M:autoextend #innodb_log_group_home_dir = C:\mysql\data/ # You can set .._buffer_pool_size up to 50 - 80 % # of RAM but beware of setting memory usage too high #innodb_buffer_pool_size = 384M #innodb_additional_mem_pool_size = 20M # Set .._log_file_size to 25 % of buffer pool size #innodb_log_file_size = 100M #innodb_log_buffer_size = 8M #innodb_flush_log_at_trx_commit = 1 #innodb_lock_wait_timeout = 50 [mysqldump] quick max_allowed_packet = 64M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [myisamchk] key_buffer_size = 256M sort_buffer_size = 256M read_buffer = 8M write_buffer = 8M [mysqlhotcopy] interactive-timeout

  Read the article

• ModalPopupExtender z-index value decreases after every show

  - by ryanulit

  This is a new one I have never seen before. I have a gridview containing a bunch of categories that can be edited by clicking on the respective "Edit" link within the gridview. The modalpopupextender is then shown programmatically (.show() method) and the user is allowed to edit the category. Then the modal popup is programmtically hidden (.hide() method) when the user presses "Update" or "Cancel". For some reason after every new show of the modal popup, the z-index is decreasing by 1000 until it is hidden behind everything on my page. It starts at 7000 for the very first show. Therefore the user would not be able to edit an infinite number of categories if they wanted to. Any ideas why this is happening? Css class used on modalpopupextender: DIV.box-pop { border: #95aab9 1px solid; background-color: #ECF1F5; display: block; position: relative; margin: -6px 6px 6px -6px; padding: 4px; z-index: 10000; } Panel used for popup: <asp:Panel ID="PanelModify" runat="server" Width="250px" CssClass="box-pop"> <asp:UpdatePanel ID="UpdatePanelModify" runat="server" UpdateMode="Conditional"> <ContentTemplate> <table width="100%" cellpadding="3" cellspacing="3"> <tr> <td> <div class="box"> <h1> <span><strong> <asp:Literal ID="LiteralModalTitle" runat="server" /></strong></span> </h1> <table border="0" width="100%"> <tr> <td> <asp:TextBox ID="TextBoxModifiedText" runat="server" Width="173px" ValidationGroup="Modify"></asp:TextBox> <asp:RequiredFieldValidator ID="RequiredFieldValidatorModifiedText" runat="server" ValidationGroup="Modify" ErrorMessage="*" ControlToValidate="TextBoxModifiedText" Display="Dynamic"> </asp:RequiredFieldValidator> </td> </tr> <tr> <td> <asp:Button ID="ButtonUpdate" runat="server" Text="Update" ValidationGroup="Modify" /><asp:Button ID="ButtonInsert" runat="server" Text="Insert" ValidationGroup="Modify" /> &nbsp; <asp:Button ID="ButtonCancel" runat="server" Text="Cancel" CausesValidation="false" /> </td> </tr> </table> </div> </td> </tr> </table> </ContentTemplate> </asp:UpdatePanel> </asp:Panel> <ajaxToolkit:ModalPopupExtender ID="ModalPopupExtenderModify" runat="server" PopupControlID="PanelModify" TargetControlID="ButtonHideModify" BackgroundCssClass="modalBackground"> </ajaxToolkit:ModalPopupExtender> <asp:Button ID="ButtonHideModify" runat="server" Style="display: none;" />

  Read the article

• Ninject 2 and MVC 2.0

  - by theouteredge

  I've updated a project to VS2010 and MVC2 from VS2008 and MVC1. I'm having problems with Ninject not finding controllers within Areas Here is my global.asax.cs file: namespace Website { // Note: For instructions on enabling IIS6 or IIS7 classic mode, // visit http://go.microsoft.com/?LinkId=9394801 public class MvcApplication : NinjectHttpApplication { public static StandardKernel NinjectKernel; public static void RegisterRoutes(RouteCollection routes) { routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.MapRoute( "Balance", "Balance/{action}/{month}/{year}", new { controller = "Balance", action = "Index", month = DateTime.Now.Month, year = DateTime.Now.Year } ); routes.MapRoute( "Default", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Login", action = "Index", id = "" } // Parameter defaults ); } /* protected void Application_Start() { AreaRegistration.RegisterAllAreas(); RegisterRoutes(RouteTable.Routes); // initializes the NHProfiler so you can see what is going on with your queries HibernatingRhinos.Profiler.Appender.NHibernate.NHibernateProfiler.Initialize(); } */ protected override void OnApplicationStarted() { RegisterRoutes(RouteTable.Routes); AreaRegistration.RegisterAllAreas(); RegisterAllControllersIn(Assembly.GetExecutingAssembly()); } protected void Application_Error(object sender, EventArgs e) { var errorService = NinjectKernel.Get<IErrorLogService>(); errorService.LogError(HttpContext.Current.Server.GetLastError().GetBaseException(), "AppSite"); } protected override IKernel CreateKernel() { if (NinjectKernel == null) { NinjectKernel = new StandardKernel(new ServiceModule()); } return NinjectKernel; } } public class ServiceModule : NinjectModule { public override void Load() { Bind<IHelper>().To<Helper>().InRequestScope(); Bind<IErrorLogService>().To<ErrorLogService>(); Bind<INHSessionFactory>().To<NHSessionFactory>().InSingletonScope(); Bind<ISessionFactory>().ToMethod(ctx => ctx.Kernel.Get<INHSessionFactory>().GetSessionFactory()) .InSingletonScope(); Bind<INHSession>().To<NHSession>(); Bind<ISession>().ToMethod(ctx => ctx.Kernel.Get<INHSession>().GetSession()); } } } Accessing controllers within the /Controllers folder works OK, but accessing controllers within a /Areas/Member/Controller throws the following error: Server Error in '/' Application. Cannot be null Parameter name: service Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.ArgumentNullException: Cannot be null Parameter name: service Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [ArgumentNullException: Cannot be null Parameter name: service] Ninject.ResolutionExtensions.GetResolutionIterator(IResolutionRoot root, Type service, Func`2 constraint, IEnumerable`1 parameters, Boolean isOptional, Boolean isUnique) +193 Ninject.Web.Mvc.NinjectControllerFactory.GetControllerInstance(RequestContext requestContext, Type controllerType) +41 System.Web.Mvc.DefaultControllerFactory.CreateController(RequestContext requestContext, String controllerName) +66 System.Web.Mvc.MvcHandler.ProcessRequestInit(HttpContextBase httpContext, IController& controller, IControllerFactory& factory) +124 System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContextBase httpContext, AsyncCallback callback, Object state) +50 System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContext httpContext, AsyncCallback callback, Object state) +48 System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) +16 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8771488 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +184 Version Information: Microsoft .NET Framework Version:4.0.30128; ASP.NET Version:4.0.30128.1 The Url for this request is /Member/Controller/, If I change the Url too /Controller the controller fires but I get an error that the system cannot find the View in the path /Views When it should be looking in /Area/Members/Views I have either done something wrong in the upgrade or I'm missing something bt I just can't figure out what. I've been trying to figure this out for 3 days...

  Read the article

• Propel Single Table Inheritance Issue

  - by lo_fye

  I have a table called "talk", which is defined as abstract in my schema.xml file. It generates 4 objects (1 per classkey): Comment, Rating, Review, Checkin It also generates TalkPeer, but I couldn't get it to generate the other 4 peers (CommentPeer, RatingPeer, ReviewPeer, CheckinPeer), so I created them by hand, and made them inherit from TalkPeer.php, which inherits from BaseTalkPeer. I then implemented getOMClass() in each of those peers. The problem is that when I do queries using the 4 peers, they return all 4 types of objects. That is, ReviewPeer will return Visits, Ratings, Comments, AND Reviews. Example: $c = new Criteria(); $c->add(RatingPeer::VALUE, 5, Criteria::GREATER_THAN); $positive_ratings = RatingPeer::doSelect($c); This returns all comments, ratings, reviews, & checkins that have a value 5. ReviewPeer should only return Review objects, and can't figure out how to do this. Do I actually have to go through and change all my criteria to manually specify the classkey? That seems a little pointless, since the Peer name already distinct. I don't want to have to customize each Peer. I should be able to customize JUST the TalkPeer, since they all inherit from it... I just can't figure out how. I tried changing doSelectStmt just in TalkPeer so that it automatically adds the CLASSKEY restriction to the Criteria. It almost works, but I get a: Fatal error: Cannot instantiate abstract class Talk in /models/om/BaseTalkPeer.php on line 503. Line 503 is in BaseTalkPeer::populateObjects(), and is the 3rd line below: $cls = TalkPeer::getOMClass($row, 0); $cls = substr('.'.$cls, strrpos('.'.$cls, '.') + 1); $obj = new $cls(); The docs talked about overriding BaseTalkPeer::populateObject(). I have a feeling that's my problem, but even after reading the source code, I still couldn't figure out how to get it to work. Here is what I tried in TalkPeer::doSelectStmt: public static function doSelectStmt(Criteria $criteria, PropelPDO $con = null) { $keys = array('models.Visit'=>1,'models.Comment'=>2,'models.Rating'=>3,'models.Review'=>4); $class_name = self::getOMClass(); if(isset($keys[$class_name])) { //Talk itself is not a returnable type, so we must check $class_key = $keys[$class_name]; $criteria->add(TalkPeer::CLASS_KEY, $class_key); } return parent::doSelectStmt($criteria, $con = null); } Here is an example of my getOMClass method from ReviewPeer: public static function getOMClass() { return self::CLASSNAME_4; //aka 'talk.Review'; } Here is the relevant bit of my schema: <table name="talk" idMethod="native" abstract="true"> <column name="talk_pk" type="INTEGER" required="true" autoIncrement="true" primaryKey="true" /> <column name="class_key" type="INTEGER" required="true" default="" inheritance="single"> <inheritance key="1" class="Visit" extends="models.Talk" /> <inheritance key="2" class="Comment" extends="models.Talk" /> <inheritance key="3" class="Rating" extends="models.Talk" /> <inheritance key="4" class="Review" extends="models.Rating" /> </column> </table> P.S. - No, I can't upgrade from 1.3 to 1.4. There's just too much code that would need to be re-tested

  Read the article

• Partial view links not working in Fire Fox

  - by user329540

  I have a MVC4 asp.net application, I have two layouts a main layout for the main page and a second layout for the nested pages. The problem I have is with the second layout, on this layout I call a partial view which has my navigation links. In IE the navigation menu displays fine and when each item is clicked it navigates as expected. However in FF when the page renders the navigation bar is displayed but it has no 'click functionality' if you will its as if its simply text. My layout of nested page: <header> <img src="../../Images/fronttop.png" id="nestedPageheader" alt="Background Img"/> <div class="content-wrapper"> <section > <nav> <div id="navcontainer"> </div> </nav> </section> <div> </header> The script to retreive partial view and information for dynamic links on layout page. <script type="text/javascript"> var menuLoaded = false; $(document).ready(function () { if($('#navcontainer')[0].innerHTML.trim() == "") { $.ajax({ url: "@Url.Content("~/Home/MenuLayout")", type: "GET", success: function (response, status, xhr) { var nvContainer = $('#navcontainer'); nvContainer.html(response); menuLoaded = true; }, error: function (XMLHttpRequest, textStatus, errorThrown) { var nvContainer = $('#navcontainer'); nvContainer.html(errorThrown); } }); } }); </script> May partial view: @model Mscl.OpCost.Web.Models.stuffmodel <div class="menu"> <ul> <li><a>@Html.ActionLink("Home", "Index", "Home")</a></li> <li><a>@Html.ActionLink("some stuff", "stuffs", "stuff")</a></li> <li> <h5><a><span>somestuff</span></a></h5> <ul> <li><a>stuffs1s</a> <ul> @foreach (var image in Model.stuffs.Where(g => g.Grouping == 1)) { <li> <a>@Html.ActionLink(image.Title, "stuffs", "stuff", new { Id = image.CategoryId }, null)</a> </li> } </ul> </li> </ul> </il> </ul> </div> I need to know why this works fine in IE but why its not working in FF(all versions). Any assistance would be appreciated.

  Read the article

• Blocking a distributed, consistent spam attack? Could it be something more serious?

  - by mattmcmanus

  I will do my best to try and explain this as it's strange and confusing to me. I posted a little while ago about a sustained spike in mysql queries on a VPS I had recently setup. It turned out to be a single post on a site I was developmenting. The post had over 30,000 spam comments! Since the site was one I was slowly building I hadn't configured the anti-spam comment software yet. I've since deleted the particular post which has given the server a break but the post's url keeps on getting hit. The frustrating thing is every hit is from a different IP. How do I even start to block/prevent this? Is this even something I need to worry about? Here are some more specific details about my setup, just to give some context: Ubuntu 8.10 server with ufw setup The site I'm building is in Drupal which now has Mollom setup for spam control. It wasn't configured before. The requests happen inconsistently. Sometimes it's every couple seconds and other times it's a an or so between hits. However it's been going on pretty much constantly like that for over a week. Here is a sample of my apache access log from the last 15 minutes just for the page in question: dev.domain-name.com:80 97.87.97.169 - - [28/Mar/2010:06:47:40 +0000] "POST http://dev.domain-name.com/comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 202.149.24.193 - - [28/Mar/2010:06:50:37 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 193.106.92.77 - - [28/Mar/2010:06:50:39 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 194.85.136.187 - - [28/Mar/2010:06:52:03 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 220.255.7.13 - - [28/Mar/2010:06:52:14 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 195.70.55.151 - - [28/Mar/2010:06:53:41 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 71.91.4.31 - - [28/Mar/2010:06:56:07 +0000] "POST http://dev.domain-name.com/comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 98.209.203.170 - - [28/Mar/2010:06:56:10 +0000] "POST http://dev.domain-name.com/comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 24.255.137.159 - - [28/Mar/2010:06:56:19 +0000] "POST http://dev.domain-name.com/comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 77.242.20.18 - - [28/Mar/2010:07:00:15 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 94.75.215.42 - - [28/Mar/2010:07:01:34 +0000] "POST /comment/reply/3 HTTP/1.0" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 89.115.2.128 - - [28/Mar/2010:07:03:20 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 75.65.230.252 - - [28/Mar/2010:07:05:05 +0000] "POST http://dev.domain-name.com/comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 206.251.255.61 - - [28/Mar/2010:07:06:46 +0000] "POST /comment/reply/3 HTTP/1.0" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 213.194.120.14 - - [28/Mar/2010:07:07:22 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" I understand this is an open ended question, but any help or insight you could give would be much appreciated.

  Read the article

< Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >