Search Results

Search found 17856 results on 715 pages for 'setup py'.

Page 424/715 | < Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >

• aligning truecrypt partition on 1.5TB 4kB sector drive

  - by pQd

  hi, aligning partitions to start at real physical sector of ssds / stripped raids / 4kB drives is a 'good thing to do'. but i've run into a problems when trying to do it for a truecrypt partition that will contain ext3 on it. or so it seems. when drive is question is partitioned properly and formatted with ext3 i get very reasonable write speeds around 70-80MB/s, but when i put truecrypt and ext3 on the top of it write performance becomes very unstable and goes between 1-25MB/s with very high io-wait. on the same server i dont have any performance issues with ext3 on the top of truecrypt on regular 512B-sector 500GB sata disks. so my best guess is that iowaits are caused by misalignment but i cannot really find reliable information on how to calculate optimal partition beginning. i've tried to start it at 128 logical sector, i've also tried 8132 sector as suggested here but both gave me very bad and unstable performance. do you have any experience with similar setup? thanks!

  Read the article

• hung up troubleshooting packet discards

  - by Chris Satola

  I realize my question is generic, but hopefully someone may have some guidance for me. My network consists of Cisco switches. I am seeing a significant amount (upwards of millions of packets per day) transmit drops between two switches. One being a 3750 and the other a 3560. The peak throughput of this link is only upper 400Mbps, so it shouldn't be a bandwidth issue. At this point, I am sort of clueless where to look or what tools I can use to determine what packets are dropping and why. I can setup a SPAN port on that link and wireshark it, but I don't know if that could tell me anything. Does anyone have any suggestions? Thanks in advance.

  Read the article

• ArchBeat Top 20 for March 25-31, 2012

  - by Bob Rhubart

  The top 20 most-clicked links as shared via my social networks for the week of March 25-31, 2012. Oracle Cloud Conference: dates and locations worldwide The One Skill All Leaders Should Work On | Scott Edinger BPM in Retail Industry | Sanjeev Sharma Oracle VM: What if you have just 1 HDD system | @yvelikanov Solution for installing the ADF 11.1.1.6.0 Runtimes onto a standalone WLS 10.3.6 | @chriscmuir Beware the 'Facebook Effect' when service-orienting information technology | @JoeMcKendrick Using Oracle VM with Amazon EC2 | @pythianfielding Oracle BPM: Adding an attachment during the Human Task Initialization | Manh-Kiet Yap When Your Influence Is Ineffective | Chris Musselwhite and Tammie Plouffe Oracle Enterprise Pack for Eclipse 12.1.1 update on OTN  A surefire recipe for cloud failure | @DavidLinthicum  IT workers bore brunt of offshoring over past decade: analysis | @JoeMcKendrick Private cloud-public cloud schism is a meaningless distraction | @DavidLinthicum Oracle Systems and Solutions at OpenWorld Tokyo 2012 Dissing Architects, or "What's wrong with the coffee?" | Bob Rhubart Validating an Oracle IDM Environment (including a Fusion Apps build out) | @FusionSecExpert Cookbook: SES and UCM setup | George Maggessy Red Samurai Tool Announcement - MDS Cleaner V2.0 | @AndrejusB OSB/OSR/OER in One Domain - QName violates loader constraints | John Graves Spring to Java EE Migration, Part 3 | @ensode Thought for the Day "Inspire action amongst your comrades by being a model to avoid." — Leon Bambrick

  Read the article

• Sharing a wifi connection between different user profiles on Windows XP

  - by crowne

  I've set-up two separate user profiles on an old laptop running Windows-XP, and noted the following strange behaviour. When the wireless network is setup using WEP both user profiles can connect to the internet and I can switch between user profiles, without network connectivity issues. However when I changed the wireless security to WPA2, the first user to connect gets access to the internet, when switching to the second profile the connection fails. The behaviour is the same regardless of which of the two profiles logs on first. I also tried this with one user with admin rights and one without, and got the same result. I'm not too concerned about a fix for this other than forcing the users to log-off when sharing the laptop, but I'd be interested to know if anyone can corroborate my findings. The network config was done using Intel® PROSet/Wireless.

  Read the article

• Intel Rapid Storage Technology service always crashes

  - by Massimo

  I'm running Windows 7 x64 on a system based on an Asus Z87-Deluxe motherboard; the storage is configured for RAID mode; there is a single SSD drive for the O.S. and two 4-TB disks in a RAID 1 setup for the data. I've installed the latest version of Intel's Rapid Storage Technology drivers, 12.8.0.1016. The program complains about its service not being running, and the service is actually stopped; if I try to start it, it crashes. I've already tried reinstalling the package, but nothing changed. All the disks work correctly, but the RST program is unusable. How can I fix this?

  Read the article

• What is the best way to run ClamAV on Windows Server 2008 R2

  - by gabbsmo

  I'm hosting a Wordpress-site on Windows Server 2008 RS and want to scan all files that are uploaded by users for viruses using this plugin http://wordpress.org/extend/plugins/upload-scanner/. I'm on a really tight budget (no profit) so ClamAV seem like a good choice. What is the best way to run ClamAV under these circumstances? I'm concidering the following options: Just running the raw windows build from http://sourceforge.net/projects/clamav/ an setup definition updates with task scheduler. Any way to automate updates of the scanner (binaries)? Using a "distro" like ClamWin or Immunet (advertised on clamav.net). Any suggestions are welcome.

  Read the article

• FTP error 424 failed to establish connection

  - by cKK

  Getting "ftp error 425 failed to establish connection" when trying to connect to ftp server. Tried 2 ftp clients on 3 machines on same network and none work. However FTP works from home / mobile broadband. No ip blocks on ftp sever. Other ftp servers(differrent ip/hosts) work okay. firewall setup correct, no ports blocked. Is it possible to use a proxy for ftp a i think it's something with the ISP but taking too long to fix?

  Read the article

• Change order of monitors without changing fullscreen"size"

  - by user171489

  I have a dual monitor setup. My primary monitor is a 22" with a max resolution of 1680x1050 and my secondary is a 19" with a max resolution of 1280x1024. The secondary is standing on the left side of the primary one. My problem now is, that, if I change the order of the monitors in my nvidia x-server settings, so that my secondary is the first one (or the one on the left), the fullscreen mode in flash in scaled up to my secondary monitor, even if it´s displayed on my primary one. Meaning that i get a 1280x1024 "fullscreen" window on my bigger primary monitor. When I configure my x-server settings so the secondary monitor is the one on the right, I don´t have this problem. The only thing then is, that I have to scroll out on the right to get to my monitor on the right. I can´t move my secondary monitor on the right side of my primary due to lack of space and my belief that there must be a software solution. ;) Thanks in advance.

  Read the article

• 4 - 7 second delay accessing Mysql across the network

  - by Kristiaan

  Hello, our company has recently purchased a new server with the intention of replacing our aging database server. its a full 64bit 2008 enterprise system, i have got the basic server setup and configured and then installed the 64bit version of mysql on the server, this has then been configured to match where possible our existing server as much as it can. however i have noticed that when it was swapped with the production database server our software systems had an increased delay accessing the mysql database this was anything beween 4 - 7 seconds. i have tried disabling TOE, IPv6 and a few other suggested soultions to this but so far cannot find out where this slowdown is coming from. replacing the server with the production one and the delay goes away. in terms of software and hardware the servers are not very identical at all due to one being windows 2003 std with a 32bit server and the new one being windows 2008 enterprise with a 64bit server. thanks Kris

  Read the article

• ISPConfig - Unexisting subdomain address goes to an existing one

  - by xperator

  I am running Nginx/ISPConfig setup for about 6-7 months. Never had a problem and everything is smooth. But I just noticed that if browse to "blab.example.com", the page opens one of my wordpress blogs on the other domain. No matter what name I use for subdomain, Anything that I enter randomly "b53ks.example.com" still goes to that blog page. I have 3 or 4 different domain names and websites on the same server. But I think I misconfigured somewhere and that might be the cause of this. Lets say I have these domains: example-1.com, example-2.com, another-example.com If I go to anything.example-1.com or serverfault.example-2.com, or google.another-example.com the returned page is my blog at blog.example-1.com Note : I didn't set any subdomain in ISPConfig. Instead, I used "Add new website" for making a subdomain.

  Read the article

• Dirt Cheap Bi-Directional Antenna Wirelessly Extends Your LAN

  - by Jason Fitzpatrick

  If you’re looking for an effective way to link remote LANs without the hassle of laying cable, this DIY bi-directional antenna is a quick (and cheap) method for bringing internet access to outbuildings and other locations. Tinker Danilo Larizza needed to share internet access between apartments that are relatively close together but not hardwired–ruling out simply sharing the access via existing LAN infrastructure. His solution combines a simple scrap wire antenna array mounted inside a plastic food bin (seen here with the cover removed to show the antenna) and some coaxial cable to link the antenna to two routers. Our favorite part about his build is that he constructed the pair to establish if the antenna setup would even work in his location and intended to buy commercial antennas if it did; his Tupperware models worked so well, however, they’re now the permanent solution. Hit up the link below for more information about the project. 2.4 Ghz Directive Biquad Antenna [via Hack A Day] How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

  Read the article

• Configuring port forwarding on Fortigate 50B

  - by GomoX

  I can't for the life of me get port forwarding to work on my Fortigate 50B. I followed the setup tips described on this other SF thread with no success. The only specific difference I can find is we are using load balancing through 2 different internet uplinks. Is there any caveat specific to this scenario that I might be missing? If you need any specific additional information please ask because I think I have checked everything: Virtual IP mapping on external interface wan1 ACCEPT all from any on wan1 to the corresponding server on internal No seeming offending firewall rules (any specific pitfalls that I might want to check for?)

  Read the article

• Laptop stopped recognizing USB hard drive

  - by vahokif

  Hi, My Packard Bell EasyNote TX86 laptop stopped recognizing my 1 TB Toshiba Store Art hard drive. It worked fine until now, and it still works on other computers. Other USB devices (including storage) work, and I've tried plugging it in every port, to no avail. When I plug it in it spins up, but Windows doesn't react at all (it's not in disk management), Linux doesn't write anything in dmesg and I can't see it in BIOS setup. I didn't use it at all today, apart from plugging it into a freshly-installed Windows 7 machine once (where it worked). What can I do? Which device is to blame here? EDIT: One more thing. I unplugged the drive while the laptop was hibernated. Google says this might be the problem and it might have something to do with resetting the USB Host Controller.

  Read the article

• How can I make a vpn network login the default behavior for logging into Windows?

  - by Danny

  To login to the machine, I have to login to our domain. When I am at work, the unauthenticated wireless permits access to the domain. However, the internet is not available until I connect via the vpn. From home, I have to connect via the vpn first, then I can login to the domain. I have successfully setup a network logon with the vpn (following the directions found here). And for the most part it works correctly. (There is an issue with logout/login I haven't figured out just yet). As I currently have to Switch User and select the Network Login button, I'd like to know if it is possible to have the network login the default behavior when logging into the system. This is mostly a usability issue than anything else.

  Read the article

• UDP Reverse Proxy

  - by user180195

  I have found a way to make reverse-proxy to an external IP. Here is how someone making a request will see it's request being passed: Clients sends request Request reaches the Datacenter one in some place That datacenter, acting as a reverse proxy will redirect the same exact request to another datacenter. The datacenter will then process the request Although, this only works with TCP/HTTP (Looking currently at HaProxy). I am hosting game servers at the other datacenter (where the proxy is not) that are using UDP protocol. Do you know how can I setup a reverse proxy using the UDP protocol.

  Read the article

• Dealing with an Idiot [closed]

  - by inspectorG4dget

  I'm a 4th year University Computer Science student, and I have this problem, that I don't seem to be able to find a straight answer to: As a 4th year computer science student, I spend more time in the computer lab on campus, than even my own home. This means that getting along with everyone else here is very important to me. In most cases, this is not an issue because my interactions with almost all the people here fall into one of the following categories: Let me help you, junior Hi fellow student in a course I'm taking, I'm having trouble with this assignment question. Can you give me a hint as to how you solved it? Hi fellow student in a course I'm taking, This is how I solved the problem that you're stuck on. Hope it helps Hi fellow student, I noticed that you're working on a project, using a library that I'm interested in. Can we setup a time so I can learn about this library from you? This model of interaction works very well for me. However, there is one fellow student, who manages to make my life hell beyond all of this (his name is not important, let's just call him "Sam"). He seems to be always (pardon my crass description) high and completely unwilling to contribute to a constructive, academic conversation. He's a pretty smart guy, but just comes across as (I hate to say something like this about a fellow student, but) an imbecile. He also has ignorant opinions on important topics, some of which pertain to my specialization (AI, NLP, etc), and when I try to explain to him why he's wrong, all he does is insult me and put me in a foul mood. I have tried ignoring him (sitting somewhere else in the lab, headphones, etc), but he seems to like doing this because he approaches me and no amount of "leave me alone" seems to do the trick. Can anyone please suggest to me how to deal with this man in a civil way? Thank you

  Read the article

• Virtualmin Configuration

  - by Allen

  I am trying to get Virtualmin setup and have reached a point where my noobish sysadmin skills aren't getting the job done. This is the message I get now when I try and refresh the configuration of Virtualmin. BIND DNS server is installed, and the system is configured to use it. However, the default master DNS server XXXXXX is not a fully qualified domain name. Sendmail is only accepting SMTP connections on the following ports : 127.0.0.1 port smtp. Email from other systems on the Internet will not be accepted. This can be changed in the Sendmail Mail Server module. Please advise what I need to do to get Sendmail configured properly. Thanks!

  Read the article

• Copy-and-Pasted Test Code: How Bad is This?

  - by joshin4colours

  My current job is mostly writing GUI test code for various applications that we work on. However, I find that I tend to copy and paste a lot of code within tests. The reason for this is that the areas I'm testing tend to be similar enough to need repetition but not quite similar enough to encapsulate code into methods or objects. I find that when I try to use classes or methods more extensively, tests become more cumbersome to maintain and sometimes outright difficult to write in the first place. Instead, I usually copy a big chunk of test code from one section and paste it to another, and make any minor changes I need. I don't use more structured ways of coding, such as using more OO-principles or functions. Do other coders feel this way when writing test code? Obviously I want to follow DRY and YAGNI principles, but I find that test code (automated test code for GUI testing anyway) can make these principles tough to follow. Or do I just need more coding practice and a better overall system of doing things? EDIT: The tool I'm using is SilkTest, which is in a proprietary language called 4Test. As well, these tests are mostly for Windows desktop applications, but I also have tested web apps using this setup as well.

  Read the article

• What configuration management solutions exist in a non-networked environment?

  - by Rob Spieldenner

  My servers exist in an environment without outside network connectivity (this is a requirement), so when I deploy updates all packages, binaries, config files, etc. must be included on the delivered media. And of course I want some sort of configuration management so I can tell what has and hasn't been installed. So I was wondering if people had experience with chef, puppet, or another configuration management type tool for dealing with this type of environment. Worst case I deploy my updates as an RPM. EDIT: My setup has both Linux servers and Windows servers.

  Read the article

• Why doesn't Windows 7 allow me to format?

  - by hydroparadise

  Dell support can be fun to deal with right? Ultimately, I have been going back and forth with Dell on an issue and came to reinstalling Windows 7 32-Bit Pro. The problem is that Windows Setup will not let me format. I've read other posts that say Windows 7 must installed on first partition here. But now that confuses me because the computer came shipped with the installation on the third partion as shown in the picture below? Is there a real problem? Or is this a Microsoftism? Should I obliterate the "OEM" partition to make this work? Please note that the format, delete, new, and extend options are grayed out.

  Read the article

• How to back up a network volume to my Time Capsule?

  - by Mike

  I have a Time Capsule that I'm using for my backups. I have a network volume (coincidentally on the same time capsule) that I'd like to back up as well. How can I tell Time Machine to back up network volumes in addition to my main laptop hard drive? PS: yes, I know this setup isn't ideal. It'll incur 2x network overhead when backing up the network volume, plus my data won't be safe in the event of a drive failure since both copies will be on the same disk. However, it will give me some small amount of safety in the event I accidentally delete files on the network volume, among other things.

  Read the article

• Can't update scala on Gentoo

  - by xhochy

  As I wanted to test Scala 2.9.2 on my gentoo system I tried updated the package but ended up with this error. I can't figure out where the problem may be: Calculating dependencies ...... done! >>> Verifying ebuild manifests >>> Jobs: 0 of 1 complete, 1 running Load avg: 0.23, 0.16, 0.20 >>> Emerging (1 of 1) dev-lang/scala-2.9.2 >>> Jobs: 0 of 1 complete, 1 running Load avg: 0.23, 0.16, 0.20 >>> Failed to emerge dev-lang/scala-2.9.2, Log file: >>> Jobs: 0 of 1 complete, 1 running Load avg: 0.23, 0.16, 0.20 >>> '/var/tmp/portage/dev-lang/scala-2.9.2/temp/build.log' >>> Jobs: 0 of 1 complete, 1 running Load avg: 0.23, 0.16, 0.20 >>> Jobs: 0 of 1 complete, 1 running, 1 failed Load avg: 0.23, 0.16, 0.20 >>> Jobs: 0 of 1 complete, 1 failed Load avg: 0.23, 0.16, 0.20 * Package: dev-lang/scala-2.9.2 * Repository: gentoo * Maintainer: [email protected] * USE: amd64 elibc_glibc kernel_linux multilib userland_GNU * FEATURES: sandbox [01m[31;06m!!! ERROR: Couldn't find suitable VM. Possible invalid dependency string. Due to jdk-with-com-sun requiring a target of 1.7 but the virtual machines constrained by virtual/jdk-1.6 and/or this package requiring virtual(s) jdk-with-com-sun[0m * Unable to determine VM for building from dependencies: NV_DEPEND: virtual/jdk:1.6 java-virtuals/jdk-with-com-sun !binary? ( dev-java/ant-contrib:0 ) app-arch/xz-utils >=dev-java/java-config-2.1.9-r1 source? ( app-arch/zip ) >=dev-java/ant-core-1.7.0 dev-java/ant-nodeps >=dev-java/javatoolkit-0.3.0-r2 >=dev-lang/python-2.4 * ERROR: dev-lang/scala-2.9.2 failed (setup phase): * Failed to determine VM for building. * * Call stack: * ebuild.sh, line 93: Called pkg_setup * scala-2.9.2.ebuild, line 43: Called java-pkg-2_pkg_setup * java-pkg-2.eclass, line 53: Called java-pkg_init * java-utils-2.eclass, line 2187: Called java-pkg_switch-vm * java-utils-2.eclass, line 2674: Called die * The specific snippet of code: * die "Failed to determine VM for building." * * If you need support, post the output of `emerge --info '=dev-lang/scala-2.9.2'`, * the complete build log and the output of `emerge -pqv '=dev-lang/scala-2.9.2'`. !!! When you file a bug report, please include the following information: GENTOO_VM= CLASSPATH="" JAVA_HOME="" JAVACFLAGS="" COMPILER="" and of course, the output of emerge --info * The complete build log is located at '/var/tmp/portage/dev-lang/scala-2.9.2/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/dev-lang/scala-2.9.2/temp/die.env'. * Working directory: '/var/tmp/portage/dev-lang/scala-2.9.2' * S: '/var/tmp/portage/dev-lang/scala-2.9.2/work/scala-2.9.2-sources' * Messages for package dev-lang/scala-2.9.2: * Unable to determine VM for building from dependencies: * ERROR: dev-lang/scala-2.9.2 failed (setup phase): * Failed to determine VM for building. * * Call stack: * ebuild.sh, line 93: Called pkg_setup * scala-2.9.2.ebuild, line 43: Called java-pkg-2_pkg_setup * java-pkg-2.eclass, line 53: Called java-pkg_init * java-utils-2.eclass, line 2187: Called java-pkg_switch-vm * java-utils-2.eclass, line 2674: Called die * The specific snippet of code: * die "Failed to determine VM for building." * * If you need support, post the output of `emerge --info '=dev-lang/scala-2.9.2'`, * the complete build log and the output of `emerge -pqv '=dev-lang/scala-2.9.2'`. * The complete build log is located at '/var/tmp/portage/dev-lang/scala-2.9.2/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/dev-lang/scala-2.9.2/temp/die.env'. * Working directory: '/var/tmp/portage/dev-lang/scala-2.9.2' * S: '/var/tmp/portage/dev-lang/scala-2.9.2/work/scala-2.9.2-sources' The following eix output may help: % eix java-virtuals/jdk-with-com-sun [I] java-virtuals/jdk-with-com-sun Available versions: 20111111 {{ELIBC="FreeBSD"}} Installed versions: 20111111(16:08:51 18/04/12)(ELIBC="-FreeBSD") Homepage: http://www.gentoo.org Description: Virtual ebuilds that require internal com.sun classes from a JDK Both virtual jdks 1.6 and 1.7 are installed: % eix virtual/jdk [I] virtual/jdk Available versions: (1.4) ~1.4.2-r1[1] (1.5) 1.5.0 ~1.5.0-r3[1] (1.6) 1.6.0 1.6.0-r1 (1.7) (~)1.7.0 Installed versions: 1.6.0-r1(1.6)(23:22:48 10/11/12) 1.7.0(1.7)(23:21:09 10/11/12) Description: Virtual for JDK [1] "java-overlay" /var/lib/layman/java-overlay

  Read the article

• Creating CNAME to delegated domain

  - by Starsky

  We are trying to configure F5 to do load balancing on 4 sub domains similar to this article... http://support.f5.com/kb/en-us/solutions/public/0000/200/sol277.html For Example prod.wip.example.com. NS F5NS1.example.com. prod.wip.example.com. NS F5NS2.example.com. test.wip.example.com. NS F5NS1.example.com. test.wip.example.com. NS F5NS2.example.com. Then we want to make cnames instead of delegating individual sub-domains, e.g. myapp.example.com CNAME prod.wip.example.com Microsoft DNS gives an error when I attempt to make the CNAME... dnscmd ns1 /recordadd example.com myapp CNAME myapp.prod.wip.example.com. Command failed: DNS_ERROR_NOT_ALLOWED_UNDER_DELEGATION 9563 (0000255b) The error makes perfect sense, but does anyone know of a way around it? Or are my NS records incorrect for this setup? Thank you, -Steve

  Read the article

• Forwarding emails to nonexisting users/aliases to external mail server

  - by Niclas Lindqvist

  I'm in the works of installing a postfix mailserver on a machine currently being used as web server. As of right now, I've got it working as far as that I can send and receive emails using telnet through port 25. However, as my customer is concerned with downtime, I'd like to setup all the accounts one by one over time, and making sure it works, rather than just cutting the cord to the old mail server and start creating new accounts on the new system. How can I add the domain customer.com to my mail server and just add something like [email protected] to the users and aliases-lists without the web server trying to send all emails with the @customer.com domain to the new mail server? I'm running ubuntu, using postfix and postfix-mysql on the new machine, the old mail server is on a hosted environment somewhere else, where I don't have any control.

  Read the article

• Mysql replication, one database server process

  - by Jonny

  On my development box, I want to experiment with a replication setup. But I don't want to create several mysqld processes (is it even possible?). I figured I have the main database in the process - have this as the master, then in the same process create the slave databases, and have the master data replicated into the databases that exist in the same db server. Is this possible? Is there an easier way of achieving this without trying to set up replication? Maybe to put it more simply: I want my Mysql server to be both master and slave(s) at the same time.

  Read the article

< Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >