Search Results

Search found 23182 results on 928 pages for 'worst case'.

Page 424/928 | < Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >

  • Static IP Address on Ubuntu 12.04 Virtual Machine

    - by chrisnankervis
    I've setup a VM running Ubuntu 12.04 specifically for local web development and am having some problems ensuring it has a static IP address. A static IP address is important as I'm using the IP address in my hosts file to assign a .local suffix to addresses used both in browser and to connect to the correct database on the VM. Currently, every time I connect to a new network or my VM is assigned a new IP address I need to reconfigure my whole environment which is becoming quite a pain. It also probably doesn't help that the default-lease-time on the Ubuntu VM is set to 1800 by default. At the moment I'm using VMWare Fusion and the Network Adapter is enabled and set to "Autodetect" under Bridged Networking. I've tried to set a static IP address within the dhcpd.conf using the code below: host ubuntu { hardware ethernet 00:50:56:35:0f:f1; fixed-address: 192.168.100.100; } The fixed-address that I've used is also outside the range specified in the subnet block (which in this case is 192.168.100.128 to 192.168.100.254). I've tried adding and removing the network adapter and restarting my Mac after each time to no avail. Below is an ifconfig of the VM that might be of some help: eth0 Link encap:Ethernet HWaddr 00:50:56:35:0f:f1 inet addr:192.168.0.25 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fe35:ff1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1624 errors:0 dropped:0 overruns:0 frame:0 TX packets:416 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:147348 (147.3 KB) TX bytes:41756 (41.7 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Are there any specific issues with 12.04 that I'm missing? Otherwise has anyone else got any ideas? Thanks in advance.

    Read the article

  • Cinnamon is broken after upgrade to 13.10

    - by user2306488
    I see reports of people with Unity broken after upgrading to 13.10. In my case Unity works fine but cinnamon is broken. It opens the startup applications but no window manager, no menus and the keyboad shortcuts won't work. As a consequence I can't even log out or shut down cleanly. The logs say: Oct 19 10:32:42 Aveline colord: Profile added: icc-1727cc5030c477b20ad75593e757248d Oct 19 10:32:43 Aveline gnome-session[9157]: WARNING: App 'cinnamon.desktop' exited with code 1 Oct 19 10:32:43 Aveline gnome-session[9157]: WARNING: App 'cinnamon.desktop' respawning too quickly Oct 19 10:32:43 Aveline gnome-session[9157]: CRITICAL: We failed, but the fail whale is dead. Sorry.... Oct 19 10:32:43 Aveline gnome-session[9157]: WARNING: App 'cinnamon.desktop' exited with code 1 Oct 19 10:32:46 Aveline whoopsie[1054]: online Oct 19 10:32:53 whoopsie[1054]: last message repeated 12 times Oct 19 10:32:53 Aveline kernel: [ 1982.637049] python[9626]: segfault at 1511 ip b6c9e850 sp bf8d0980 error 4 in libglib-2.0.so.0.3800.0[b6c5b000+102000] Oct 19 10:32:53 Aveline kernel: [ 1982.837527] python[9631]: segfault at 0 ip b6eb13fa sp b69ff848 error 6 in libdbus-1.so.3.7.4[b6e89000+49000] Oct 19 10:32:54 Aveline kernel: [ 1983.030271] python[9634]: segfault at a6f4098b ip b6e52389 sp bfcdad68 error 4 in libdbus-1.so.3.7.4[b6e34000+49000] Oct 19 10:32:54 Aveline kernel: [ 1983.253259] python[9639]: segfault at 4 ip b6e710f4 sp b69c1bfc error 6 in libdbus-1.so.3.7.4[b6e4b000+49000] Oct 19 10:32:54 Aveline kernel: [ 1983.501771] python[9642]: segfault at b4 ip b6e0f076 sp bf82524c error 4 in libdbus-1.so.3.7.4[b6dfd000+49000] Oct 19 10:32:54 Aveline kernel: [ 1983.721334] python[9647]: segfault at 4 ip b6eab0f4 sp b69fbbfc error 6 in libdbus-1.so.3.7.4[b6e85000+49000] Any idea?

    Read the article

  • Custom daemon script: works, but does not run at boot / startup

    - by pearjoint
    this is Ubuntu 10.10 Maverick. I have the following shell script in init.d that I want to run as a "daemon" (background service with start/stop/restart really) at system startup. There is a symlink in rc3.d. I tried 4 and 5 too. (Ideally this would initialize before graphical login happens and before a user logs in.) IMPORTANT: the script works 100% as expected and required when testing this with service MetaLeapDaemon start and service MetaLeapDaemon stop. (This shell script calls a Python program which makes sure the appropriate .pid files are both created at startup and deleted at exit.) So generally it works fine but now my only issue is why it will not be run at any of the run-levels I tried. I know for sure it isn't run because the log file it normally creates does not get created. As you can see (by the lack of any uid:gid args in the start-stop-daemon commands) this would currently run only under root, is this forbidden in a default setup? Here's the script, pretty much your run-off-the-mill daemon script really: #! /bin/sh DAEMON=/opt/metaleap/_core/daemon/MetaLeapDaemon.py NAME=MetaLeapDaemon DESC="MetaLeapDaemon" test -f $DAEMON || exit 0 set -e case "$1" in start) start-stop-daemon --start --pidfile /var/run/$NAME.pid --exec $DAEMON ;; stop) start-stop-daemon --stop --pidfile /var/run/$NAME.pid ;; restart) start-stop-daemon --stop --pidfile /var/run/$NAME.pid sleep 1 start-stop-daemon --start --pidfile /var/run/$NAME.pid --exec $DAEMON ;; *) N=/etc/init.d/$NAME echo "Usage: $N {start|stop|restart}" >&2 exit 1 ;; esac exit 0

    Read the article

  • Which window manager do you use?

    - by Stephan202
    Combining "What is your default web browser?" and "What are the differences between Linux Window Managers", I ask you: which window manager do you use, and why? Myself I prefer a minimal window manager on the one hand (in the past I used Fluxbox), but on the other hand wish to go with the main stream, to ease finding (Googling) solutions in case of problems. Hence I stick with Gnome as it is shipped with Ubuntu. Why do you use the window manager which you use? I understand some reasons may be subjective, but please try to cite technical reasons where possible.

    Read the article

  • backface culling error (in world space)

    - by acrilige
    I write simple software renderer. In my pipeline i have stage of backface culling. But looks like it has some error (see picture). I perform culling right after world transformation (is it correct?). (i can't insert picture in post coz i don't have enough points, so i just upload it (cube model): http://imageshack.us/photo/my-images/705/bcerror.png/) Vector3F view_dir(0.0f, 0.0f, 1.0f); std::vector<Triangle> to_remove; for (Triangle &t : m_triangles) { Vector4F e1 = t.v2 - t.v1; Vector4F e2 = t.v3 - t.v1; Vector3F normal( e1.y * e2.z - e1.z * e2.y, e1.z * e2.x - e1.x * e2.z, e1.x * e2.y - e1.y * e2.x ); normal.Normalize(); float dot = Dot(view_dir, normal); if (dot <= 0) to_remove.push_back(t); } for (Triangle& t : to_remove) m_triangles.erase(std::remove(m_triangles.begin(), m_triangles.end(), t), m_triangles.end()); Camera sits in origin and points in screen (RH). What is the reason? For better explanation i upload picture with cube rotation screenshots: http://imageshack.us/photo/my-images/842/bcmove.png/ UPDATED: The error occurs only when triangle has non-zero offset from origin UPDATED 2: If i process backface culling in clip space (after transforming all vertices with view and projection matrix), and just check z coordinate of triangle normal - it works perfect... Can i perform culing RIGHT BEFORE view/proj transforms? In this case looks like culling will not depends of projection and it's not right?.. UPDATED 3: I found answer and will post it in two hours - again coz of reputation lack.

    Read the article

  • Have both domain and non-domain users use NetApp CIFS storage

    - by zladuric
    My specific use case is that I have a NetApp CIFS storage that's in the domain, say, intranet. But I also have one hyper-v host that's not in the domain. I can't allow it into the domain, but I need to create guests whose VHD is on the storage. How can I achieve this? When I simply connect to a CIFS share and create a VHD there, it works, but when I try to add that VHD to the virtual machine, I get a "Failed to set folder permissions" error - probably due to folder ownership being in the domain admin. Is there a way around this? So both domain and non-domain users use the same directory?

    Read the article

  • Developer momentum on open source projects

    - by sashang
    Hi I've been struggling to develop momentum contributing to open source projects. I have in the past tried with gcc and contributed a fix to libstdc++ but it was a once off and even though I spent months in my spare time on the dev mailing list and reading through things I just never seemed to develop any momentum with the code. Eventually I unsubscribed and got my free time back and uncluttered my mailbox. Like a lot of people I have some little open source defunct projects lying around on the net, but they're not large and I'm the only contributor. At the moment I'm more interested in contributing to a large open source project and want to know how people got started because I find it difficult while working full time to develop any momentum with the code base. Other more regular contributors, who are on the project full-time, are able to make changes at will and as result enter that positive feedback cycle where they understand the code and also know where it's heading. It makes the barrier to entry higher for those that come along later. My questions are to people who actively contribute to large opensource projects, like the Linux kernel, or gcc or clang/llvm or anything else with say a developer head count of more than 10. How did you get started? Was there a large chunk of time in your life that you just could dedicate to working on the project? I know in Linus's case he had a chunk of time (6 months) to get it started. What barriers to entry did you encounter? Can you describe the initial stages of the time spent with the project, from when you had little understanding of the code to when you understood enough to commit regularly. Thanks

    Read the article

  • How to hold payment in paygate for a while?

    - by Fero
    Hi all, I have a query regarding holding the payment in PAYGATE PAYMENT GATEWAY. Here is the problem in brief. I am doing a website where the payment should be made only a certain members buy the product. For Example if there is an iPhone in my site, then that particular phone must be buy by certain quantities which given by admin. It may be done one by one user or a single user can buy all the quantities at a single time. In this case i need to hold the payment here.Because i don't want to receive the payments until the certain quantities bought. Because if certain quantities were not buy i need to refund the money to their account. We don't like to do this process. That's why we are looking for holding the payment. Is it possible or what is the best way to solve this problem? Please let me know what is you professional opinion? thanks in advance...

    Read the article

  • virtual install from ISO not getting virtual kernel

    - by Pete
    I have a KVM host (12.04.5) that I have been installing guests on in variety of ways. I just noticed recently one of my guests was running a generic kernel when I'm fairly certain I specified minimum virtual machine during install from a 12.04.2 server iso. From what I understand it should be running a stripped down kernel "optimized" for VMs. I set up another server to test, this time using a 14.04.1, and sure enough I ended up with uname -r returning 3.13.0-32-generic. It seems that if I use an .iso to install, I end up with generic regardless. However building with the vmbuilder ... --flavour virtual --suite precise ... (I don't have trusty available yet) script gives me an ubuntu 12.04.5 LTS system running kernel 3.2.0-67-virtual. The server FAQ mentions I should be getting the virtual kernel. What are practical advantages of using linux-image-virtual kernel? gives me the impression that it doesn't really matter functionally (in my case I only have a couple VMs running). I first thought was maybe I was somehow not applying the correct options because the installer F4 menu doesn't really give great feedback if the mode has been selected or not. Looking in the log /var/log/installers/syslog I see Command line: file=/cdrom/preceed/ubuntu-server-minimalvm.seed ... I know that I can install the virtual kernel package down the road, but why am I not, or should I be getting the virtual flavor of kernel from an ISO install when doing an minimum VM install?

    Read the article

  • Windows 7 can ping but can't see device on other subnet

    - by user192702
    I have 2 Windows 7 on 2 different subnets but 1 of them is unable to reach a NAS. The topology is as follow. Any idea why this is the case? Is there some Windows settings I need to apply? Subnet 1 - PC 1 - NAS Subnet 2 - PC 2 PC 1 is able to do the following: - Load the admin page on the browser. - Show the NAS under Windows Explorer - Network. - Access the NAS when typed in \\ in Windows Explorer. PC 2 is unable to do any of the above 3. It can however ping the NAS and get a response.

    Read the article

  • Ubuntu 12.04 LTS won't install - never finishes please help

    - by Richard Higgins
    Want to try Ubuntu after using Windows for 30 years. Tried to install it 5 times on a Lenovo X120e notebook and twice on a Lenovo M57 desktop. No luck, worse than what Microsoft puts you through. I burned 12.04 LTS to disc. It installs up to the "Who Are You?" screen, then stops. Accepted the recommended computer name and lower case user name. I chose "log me in automatically." After that there is no progress bar, no rotating or pulsing button, nothing to indicate the Ubuntu has not died or fallen asleep. Is that how it is written? Never heard of a program that would take a long time to install while a user looked at a locked, dead screen. I just bought the M57 desktop for my son. It came with Ubuntu 10 something. I wanted to upgrade to 12.04 but it crashed, twice, to a DOS screen saying the pc lacked a certain "init" file. Various help screen commands did not help. On the X120e, I thought a partial-failed Ubuntu install was causing the problem, so I removed the drive and deleted the Ubuntu partition and replaced it. But same result. After I fill in my name, accept computer and user name, the "continue" button does not appear to work. I can go "back" but not forward. I have waited torturous hours. It doesn't take more than two hours to install, does it?any It is my own fault because of the high expectations I had for a sensible, hassle-free installation, but I am immensely disappointed. Thank you for any response

    Read the article

  • Disable CD eject button on Windows laptop

    - by Marc Gravell
    Most laptops have a CD eject that is very sensitive, and placed such that it regularly gets triggered when handling the laptop. This is in particular a problem (for clumsy-handed me) when picking up the laptop to stow in in a laptop bag; I've lost count of the number of times it has ejected just as I am lowering it into the case! I rarely use a CD, but I am wondering whether some crafty software hack (or other trick) might be possible to make it less vulnerable. Perhaps trying to fool it into thinking it is busy (but ideally without destroying my battery). Otherwise, I might as well bow to the inevitable and snap the darned thing off. I'm not making this brand-specific, as I've seen this problem on a range of both branded and re-badged laptops. I am, however, mainly interested in windows-friendly solutions.

    Read the article

  • EMEA Engineered Systems Partner Update Call&ndash;October 30th 2013

    - by JuergenKress
    EMEA Engineered Systems Partner Update Call: Engineered Systems (Including Exalogic) updates from Oracle OpenWorld on 30th October, 2013 at 15:00 CET (UTC/GMT +1 Hour) We are pleased to invite you to the next Webcast from our Engineered Systems Partner Update Series. This time it will be all around "Engineered Systems updates from Oracle OpenWorld – all the news from Exalogic included" on Wednesday 30th October, 2013 at 15:00 CET (UTC/GMT +1 Hour). One more year, San Francisco hosted the Oracle OpenWorld, in the month of September. Every year, thousands of partners and customers attend this event to discover new products and solutions, improve their technical proficiency and knowledge, learn tips and tricks for currently installed products and understand where the industry is headed. In case you could not make it to San Francisco this time, we want to provide you with the key updates announced at Oracle OpenWorld around Engineered Systems. Please mark your diaries. You can also attend Larry’s keynote around the Oracle Database 12c In-Memory Database and M6 Big Memory Machine and many more on the Oracle OpenWorld On Demand website. Agenda: Overview of latest Engineered Systems including Exalogic and how Oracle Fusion Middleware performs on the machine How to articulate their value to customers Webcast Joining details: To Join the webcast CLICK HERE For audio reception please use the following details: Global Dial-in Numbers Session/Conference ID: 595 534 979 Password: 12385 WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Engineered Systems,Exalogic,OOW,Oracle OpenWorld,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • Generated Methods with Type Hints

    - by Ondrej Brejla
    Hi all! Today we would like to introduce you just another feature from upcoming NetBeans 7.3. It's about generating setters, constructors and type hints of their parameters. For years, you can use Insert Code action to generate setters, getters, constructors and such. Nothing new. But from NetBeans 7.3 you can generate Fluent Setters! What does it mean? Simply that $this is returned from a generated setter. This is how it looks like: But that's not everything :) As you know, before a method is generated, you have to choose a field, which will be associated with that method (in case of constructors, you choose fileds which should be initialized by that constructor). And from NetBeans 7.3, type hints are generated automatically for these parameters! But only if a proper PHPDoc is used in a corresponding field declaration, of course. Here is how it looks like. And that's all for today and as usual, please test it and if you find something strange, don't hesitate to file a new issue (product php, component Editor). Thanks a lot!

    Read the article

  • Why does 301 redirect work for http but not for https?

    - by Tom G
    Through my domain registrar I have set up a domain, essayme.co.uk, to automatically forward to https://google.com. If I go to http://essayme.co.uk it works as expected and redirects me to https://google.com. $curl -i http://essayme.co.uk HTTP/1.1 301 Moved Permanently Cache-Control: max-age=900 Content-Type: text/html Location: https://google.com Server: Microsoft-IIS/7.5 X-AspNet-Version: 4.0.30319 X-Powered-By: ASP.NET Date: Sat, 07 Jun 2014 11:14:16 GMT Content-Length: 0 Age: 0 Connection: keep-alive However, if I go to https://essayme.co.uk it just freezes and times out. $curl -i https://essayme.co.uk curl: (7) Failed connect to essayme.co.uk:443; Operation timed out What is happening in the second case? (and, if possible, how can I get the redirect to work for https?) Problem background/clarification: I don't have an SSL certificate for the essayme.co.uk domain above, but I do for my live domain (let's call it mywebsite.com), and I was seeing the exact same problem on this domain (hence why I'm trying to debug the problem). Unfortunately I can't experiment with the live domain (as it's live) and I would like to avoid having to buy a second certificate for essayme.co.uk just for debugging (unless absolutely necessary). The problem I was seeing: my live domain, mywebsite.com (not its real name), has a valid SSL certificate. Visiting https://www.mywebsite.com displayed the webpage as expected. I had set up forwarding (like in the question above) from the naked domain (mywebsite.com) to https://www.mywebsite.com) Visiting http://mywebsite.com redirected to https://www.mywebsite.com as expected. However, visiting https://mywebsite.com would freeze and time out (as in the question above). I also tried forwarding it to http://www.otherwebsite.com as an experiment (i.e. forwarding to another site that does not use SSL), but the result was the same: Visiting http://mywebsite.com redirected to http://www.otherwebsite.com as expected. Visiting https://mywebsite.com would freeze and time out again. So I set up essayme.co.uk as an experiment to try and understand why it doesn't work.

    Read the article

  • Finding header files

    - by rwallace
    A C or C++ compiler looks for header files using a strict set of rules: relative to the directory of the including file (if "" was used), then along the specified and default include paths, fail if still not found. An ancillary tool such as a code analyzer (which I'm currently working on) has different requirements: it may for a number of reasons not have the benefit of the setup performed by a complex build process, and have to make the best of what it is given. In other words, it may find a header file not present in the include paths it knows, and have to take its best shot at finding the file itself. I'm currently thinking of using the following algorithm: Start in the directory of the including file. Is the header file found in the current directory or any subdirectory thereof? If so, done. If we are at the root directory, the file doesn't seem to be present on this machine, so skip it. Otherwise move to the parent of the current directory and go to step 2. Is this the best algorithm to use? In particular, does anyone know of any case where a different algorithm would work better?

    Read the article

  • Recover a deleted webpage

    - by rc
    Suppose, a blog or a nice article was hosted on a website and it got deleted or worse the website was brought down. How do you view that web page? I tried searching for the cached version in Google. But, looks like the content was deleted long ago and is not listed in the search results directly. There are annotations to the link from many other sites, but still the actual content is not fully available. Now, can anybody help me see this page... I am actually looking for http://effectize.com/become-coolest-programmer :) And, moreover, in addition to bookmarking a favorite link, is it possible to cache the content of the link as well for later reference in case it gets deleted? EDIT: Looks like a URL can be cached for future reference. Try: http://backupurl.com/

    Read the article

  • How do I perform an action if the upstart respawn limit is hit?

    - by Daniel Huckstep
    I have an upstart job: description "foreman" start on runlevel [2345] stop on runlevel [06] respawn respawn limit 3 60 chdir /home/deploy/app/current env RAILS_ENV=production exec sudo -u deploy bundle exec foreman start We ran into a case where a rogue character in an app file caused one of the background workers to fail but the app ran normally (weird). The app worked fine, but the workers were never working. I'd like upstart to do something (send an email) if it can't start this job, since it's not entirely obvious if everything went alright. Is there something built into upstart to handle this, or do I have to get creative?

    Read the article

  • .NET and SMTP Configuration

    - by koevoeter
    Sometimes I feel stupid about discovering .NET features that have been there since an old release (2.0 in this case)... Apparently you can just use this configSecion “mailSettings” and never have to configure your SmtpClient instance in code again (no, not hard-coded): <system.net>     <mailSettings>         <smtp deliveryMethod="Network" from="My Display Name &lt;[email protected]&gt;">             <network host="mail.server.com" />         </smtp>     </mailSettings> </system.net> Now you can go all like: new SmtpClient().Send(mailMessage); …and everything is configured for you, even the from address (which you can obviously override).

    Read the article

  • Backup and restore.

    - by Xavierjazz
    I have a Thinkpad T60 with a 150GIg internal hard drive. XP Pro SP3. I also have a similar hard drive that used to be in another laptop connected via USB. It contains only data. I have cleared out a lot of duplicate files and now would like to back both up. I have Retrospect and a brand new 1Tbyte drive for this purpose. Can I back up the whole computer (both drives) but, in case only one fails, can I just restore that drive or do I have to restore both drives at the same time? I don't understand how partitions work so might I be able to partition the 1T drive and restore each smaller drive independently? Thanks.

    Read the article

  • CodePlex Daily Summary for Sunday, May 11, 2014

    CodePlex Daily Summary for Sunday, May 11, 2014Popular ReleasesGMare: GMare Beta 1.0: Features Added: Overhauled interface Re-wrote most controls and forms Automatic room creation on application open Room properties bar to change various room properties Now able to use a background from a supported Game Maker project file Block instances implemented More instance editing features like multi-Select, cherry pick select, replace, and set position More instance options on the instance list Flexible XML based .gmpx human readable project file format Game...Readable Passphrase Generator: KeePass Plugin 0.13.0: Version 0.13.0 Added "mutators" which add uppercase and numbers to passphrases (to help complying with upper, lower, number complexity rules). Additional API methods which help consuming the generator from 3rd party c# projects. 13,160 words in the default dictionary (~600 more than previous release).CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.25.0: Release v1.0.25.0 MemberInfo/MethodInfo popup is now positioned properly to fit the screen In MethodInfo popup method signatures are word-wrapped Implemented Debug text value visualizer Pining sub-values from Watch PanelxFunc: xFunc 2.15.3: Added #53TerraMap (Terraria World Map Viewer): TerraMap 1.0.3.14652: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles The setup file will make sure .NET 4 is installed, install TerraMap, create desktop and start menu shortcuts, add a .wld file association, and launch TerraMap. If you prefer the zip file, make sure you have .NET Framework v4.5 installed, then just download and extract the ZIP file, and run TerraMap.exe.R.NET: R.NET 1.5.12: R.NET 1.5.12 is a beta release towards R.NET 1.6. You are encouraged to use 1.5.12 now and give feedback. See the documentation for setup and usage instructions. Main changes for R.NET 1.5.12: The C stack limit was not disabled on Windows. For reasons possibly peculiar to R, this means that non-concurrent access to R from multiple threads was not stable. This is now fixed, with the fix validated with a unit test. Thanks to Odugen, skyguy94, and previously others (evolvedmicrobe, tomasp) fo...CTI Text Encryption: CTI Text Encryption 5.2: Change log: 5.2 - Remove Cut button. - Fixed Reset All button does not reset encrypted text column. - Switch button location between Copy and Paste. - Enable users to use local fonts to display characters of their language correctly. (A font settings file will be saved at the same folder of this program.) 5.1 - Improve encryption process. - Minor UI update. - Version 5.1 is not compatible with older version. 5.0 - Improve encryption algorithm. - Simply inner non-encryption related mec...Aspose for Apache POI: Missing Features of Apache POI SS - v 1.1: Release contain the Missing Features in Apache POI SS SDK in comparison with Aspose.Cells What's New ?Following Examples: Set Print Titles Create Pivot Table Convert Charts to images Formula Calculation Engine Import Data to Worksheets Export Data from Worksheets Tracing Precedents and Dependents Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.SEToolbox: SEToolbox 01.029.006 Release 1: Fix to allow keyboard search on load dialog. (type the first few letters of your save) Fixed check for new release. Changed the way ship details are loaded to alleviate load time for worlds with very large ships (100,000+ blocks). Fixed Image importer, was incorrectly listing 'Asteroid' as import option. Minor changes to menus (text and appearance) for clarity and OS consistency. Added in reading of world palette for color dialog editor. WIP on subsystem editor. Can now multiselec...Danmu2Ass —— ??xml/json?Ass: Danmu2Ass 1.1: ????Danmu2Ass?????????xml/json???????ASS????????。?????????????。 ?????.NET Framework 4.0??,??????Niconvert??,????????IronPython 2.7。 1.1????????python????,?????????。 ??????python?????????????,?????”niconvert.py“????exe???????,?????????。 ?????????????????????”niconvert.py“??,??ASS HEADER TPL????????。 ??????.NET 4.0!QuickMon: Version 3.9: First official release of the PowerShell script Collector. Corrective script can now also be PowerShell scripts! There are a couple of internal bugfixes to the core components as well. e.g. Overriding remote host setting now applies to ALL child collectors Main UI app now indicates (in Window title) if there are changes that needs to be saved. Polling frequency can be adjusted by 'slide bar' Note: If you have issues with the new PowerShell script collector please see my post about issu...Tiny Wifi Host: Tiny Wifi Host 3.0.0.0: Tiny Wifi Hotspot Creator (Portable) v3 size: 50KB-140KB New Features: Friendly name for connected devices instead of Mac-Address (Double click selected device to enter friendly name) Saves device names to devices.xml Better error reporting+solutions Warning sound when number of connected devices exceed a certain number. (useful when only certain number of devices must be connected at a time) Many Bug Fixes. NoAudio files does not include connect, disconnect and warning audio to dec...Media Companion: Media Companion MC3.597b: Thank you for being patient, againThere are a number of fixes in place with this release. and some new features added. Most are self explanatory, so check out the options in Preferences. Couple of new Features:* Movie - Allow save Title and Sort Title in Title Case format. * Movie - Allow save fanart.jpg if movie in folder. * TV - display episode source. Get episode source from episode filename. Fixed:* Movie - Added Fill Tags from plot keywords to Batch Rescraper. * Movie - Fixed TMDB s...SimCityPak: SimCityPak 0.3.0.0: Contains several bugfixes, newly identified properties and some UI improvements. Main new features UI overhaul for the main index list: Icons for each different index, including icons for different property files Tooltips for all relevant fields Removed clutter Identified hundreds of additional properties (thanks to MaxisGuillaume) - this should make modding gameplay easierMagick.NET: Magick.NET 6.8.9.002: Magick.NET linked with ImageMagick 6.8.9.0.VidCoder: 1.5.22 Beta: Added ability to burn SRT subtitles. Updated to HandBrake SVN 6169. Added checks to prevent VidCoder from running with a database version newer than it expects. Tooltips in the Advanced Video panel now trigger on the field labels as well as the fields themselves. Fixed updating preset/profile/tune/level settings on changing video encoder. This should resolve some problems with QSV encoding. Fixed tunes and profiles getting set to blank when switching between x264 and x265. Fixed co...NuGet: NuGet 2.8.2: We will be releasing a 2.8.2 version of our own NuGet packages and the NuGet.exe command-line tool. The 2.8.2 release will not include updated VS or WebMatrix extensions. NuGet.Server.Extensions.dll needs to be used alongside NuGet-Signed.exe to provide the NuGet.exe mirror functionality.SmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 2.0.2: SmartStore.NET 2.0.2 is primarily a maintenance release for version 2.0.0, which has been released on April 04 2014. It contains several improvements & important fixes. BugfixesIMPORTANT FIX: Memory leak leads to OutOfMemoryException in application after a while Installation fix: some varchar(MAX) columns get created as varchar(4000). Added a migration to fix the column specs. Installation fix: Setup fails with exception Value cannot be null. Parameter name: stream Bugfix for stock iss...Channel9's Absolute Beginner Series: Windows Phone 8.1: Entire source code for Windows Phone 8.1 Absolute Beginner Series.BIDS Helper: BIDS Helper 1.6.6: This BIDS Helper beta release brings support for SQL Server 2014 and SSDTBI for Visual Studio 2013. (Note that SSDTBI for Visual Studio 2013 is currently unavailable to download from Microsoft. We are releasing BIDS Helper support to help those who downloaded it before it became unavailable, and we will recheck BIDS Helper 2014 is compatible after SSDTBI becomes available to download again.) BIDS Helper 2014 Beta Limitations: SQL Server 2014 support for Biml is still in progress, so this bet...New ProjectsAcutype: Simple program that enables you to practice typing by copying out passages from books.Bass Guitar Trainer: Bass Guitar Trainer is a free application for mastering a bass guitar. Application contains also metronome and drum machineCareer Tools: Career Tools - Track your contacts when searching for a new job A simple tool built in ASP.Net MVC 5EmptyWallGallery: Test EmptyWallGalleryGames Case Project: Final year project at Northumbria University. LINQ To OWIN: LINQ to OWIN is middleware that allows you to code your Katana/OWIN web applications as a set of reactive queries using Rx (Reactive Extensions) for .NET.Orchard ContentExtension: The ContentExtension module, extends the core of the Orchard framework in order to provide a better performance. P4 Compiler: P4 ftwRevolioReader: Browse, read and download books and magazines from Revolio.Sync Email to SharePoint list: This use to sync the exchange mail box to SharePoint listVirtual Radar Server: A .NET/Mono web server that decodes Mode-S & ADS-B messages and displays the location of aircraft on a Google Maps map.??????-??????【??】??????????: ???????????????????,????,????,????,???????,?????,?????.??????。 ?????-?????【??】???????: ???????????????、??,??,??,??,??? ?,??,,??,??,??,??,??,??,????????,??????! ?????-?????【??】?????????: ???????????????????????????:???????,??????,????,????,????,?????! ???????-???????【??】???????????: ??????????,??????????????????????,???????????????,?????????????! ???????-???????【??】???????????: ???????????????????????,?????, ... ????????????,????,????,?????,???????。 ?????-?????【??】?????????: ?????????????,????????,?????,???,???????????,???????????,?????,??????!??????-??????【??】????????: ???????????????????,?????????/?,,???????????,??????????????!??????-??????【??】??????????: ?????????????????????,?????????、??、??、????,??????????,?????????????!??????-??????【??】??????????: ???????????、????、????、??????????,???,?????,???????????????. ??????-??????【??】??????????: ????????????????、?????,????????????????????,????,????,??????。 ??????-??????【??】??????????: ????????????????,?????????????? ??。??????????、????、????、?????????? ???????。 ??????-??????【??】??????????: ??????????????????,???、???!???????,????????????????,????????????,???! ????-????【??】????????: ?????????????,????,???????、???????????,???????????,????,?????,???????。 ?????-?????【??】?????????: ?????????????????、?????、?????、?????、?????、????,???????????,?????,??????!

    Read the article

  • How can I make results of a formula values that can be filtered or use vlookup with Excel

    - by Burt
    I am having an issue in that I am using various formulas to move, split data, etc from various sources. The problem is when my final results post to the final destination that I want, I still need to either run advanced filters, or a vlookup with the results. I can’t do this because as an example if cell A1 shows a value of: A127 the actual cell content is: =RIGHT(A2,FIND(" ",A2&" ")-2) Everything I read said to copy and paste special values, but this doesn’t work for me as the idea is to have the formulas/macros run everything and eliminating cutting and pasting. In the case above I have a formula that pulls that info from a spreadsheet that is saved every week. Once it is pulled part of it is cut out in another column. I then need to run a vlookup on those results for data already contained on another tab.

    Read the article

  • Virtual Machine files on ramdisk doesn't run faster than on physical disk

    - by Landy
    I installed total 36G memory (4x8G + 2x2G) in the host (Windows 7) and I used ImDisk to create a 32G ramdisk and format it to NTFS file system. Then I copied the virtual machine (in VMware Workstation format) folder, including vmx, vmdk, etc... to the new created ram disk. Then I tried to power on it in VMware Workstation. What made me surprised is that the performance is not better than before. It cost almost the same time to power on the Windows 7 VM. I check the Resource Monitor in the Windows 7 host, and the statistics of CPU, disk, network are rather normal. The memory has reported 3000+ hard fault/sec when guest OS boot then drop to 0 after the guest powered on. Any idea about this issue? I had thought the performance of ramdisk will be better than physical disk in this case. Am I wrong? Thanks.

    Read the article

  • Using PDO with MVC

    - by mister martin
    I asked this question at stackoverflow and received no response (closed as duplicate with no answer). I'm experimenting with OOP and I have the following basic MVC layout: class Model { // do database stuff } class View { public function load($filename, $data = array()) { if(!empty($data)) { extract($data); } require_once('views/header.php'); require_once("views/$filename"); require_once('views/footer.php'); } } class Controller { public $model; public $view; function __construct() { $this->model = new Model(); $this->view = new View(); // determine what page we're on $page = isset($_GET['view']) ? $_GET['view'] : 'home'; $this->display($page); } public function display($page) { switch($page) { case 'home': $this->view->load('home.php'); break; } } } These classes are brought together in my setup file: // start session session_start(); require_once('Model.php'); require_once('View.php'); require_once('Controller.php'); new Controller(); Now where do I place my database connection code and how do I pass the connection onto the model? try { $db = new PDO('mysql:host='.DB_HOST.';dbname='.DB_DATABASE.'', DB_USERNAME, DB_PASSWORD); $db->setAttribute(PDO::ATTR_ERRMODE, PDO::ERRMODE_EXCEPTION); } catch(PDOException $err) { die($err->getMessage()); } I've read about Dependency Injection, factories and miscellaneous other design patterns talking about keeping SQL out of the model, but it's all over my head using abstract examples. Can someone please just show me a straight-forward practical example?

    Read the article

  • "Play on another device" function not working with Samsung Allshare

    - by Tural Teyyuboglu
    Briefly I can't get work "Play on another device" function More detailed My Samsung TV (which support network) and PC are in the same network. The problem is, I can play PC contents from TV. But when I try to control TV remotely from Allshare software (PC), it shows TV only as connected device: But not as remote player in "players" list The result Tried to turn off firewall completely, reset router, re-install software. No success. Please help. BTW. On this link they kinda explained how to do it, but I software doesn' detect the TV as player in my case: http://www.samsung.com/global/allshare/pcsw/quickguide.html

    Read the article

< Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >