Search Results

Search found 11380 results on 456 pages for 'cpu speed'.

Page 426/456 | < Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >

• Windows 8.1 Update 1 Disk Usage 100%

  - by Gookjin Jeong

  Background Information / Computer Specs I have a 14-inch Samsung Series 5 Ultra. Core i5 CPU, 750GB HDD, 8GB RAM, Intel HD Graphics 4000. I've had the computer for about 1.5 years with no major problems. Problem The issue appeared at the beginning of April this year, when I updated the OS to Windows 8.1 Update 1 (not from 8 to 8.1). After being on continually (except for at night, when I put it on sleep mode) for about 48 hours, the disk usage as seen by Task Manager hits 100%. When this happens, everything from opening/closing applications to typing and even bringing up the start screen by pressing the Windows key becomes extremely slow. The only way to make the disk usage decrease is to restart the computer. Then the problem repeats. I've used my current laptop (as well as my previous laptops) this way -- putting it on sleep mode at night and restarting it only when Windows needs to install updates -- for a long time. So I know the 100% disk usage is not due to the way I use the computer. The thing that causes the spike varies. Sometimes it's System, sometimes it's one of the various applications I installed (e.g. Chrome, Evernote, Spotify, Wunderlist, iTunes, etc.), and sometimes it's Antimalware Service Executable, etc. Tried Solutions I think I tried almost every solution out there for this problem: Running the check disk command (chkdsk /b /f /v /scan c:) from Admin Command Prompt Running Windows Memory Diagnostic Disabling Superfetch and Windows Search from services.msc Running "Fix problems with Windows Update" from Control Panel -- Troubleshooting Updating and rolling back the graphics driver (Intel HD 4000) Disabling "Use hardware acceleration when available" from Chrome settings Disabling Intel Rapid Storage Technology Running the SFC /SCANNOW command as recommended here Running a quick scan & a full scan from Windows Defender (no threats found) Taking the hard drive out and putting it back Refreshing the computer, from the Update and recovery -- Recovery option in Windows settings NONE of the above worked for me. I was about to give up but then noticed that one of the main culprits of the disk usage spike, as shown in the "Disk Activity" section of the Resource Monitor, was C:\System (pagefile.sys). I googled around and found that one of the recommended solutions was to disable pagefile. I then went to **Control Panel -- System and Security -- System -- Advanced system settings -- Advanced tab -- Performance settings -- Advanced tab -- "Change" under Virtual memory and discovered that the number for "Currently allocated" at the bottom was 1280MB, although the number for "Recommended" was 4533MB. I immediately changed it to 4533MB and checked my family members' computers to see what the numbers were like. All of theirs had a currently allocated space that was only slightly smaller than the recommended space. See screenshot below: This might fix the problem. I'll have to wait a couple more days.But if it doesn't, what in the world should I do next? I'm guessing the hard drive isn't failing because This computer is less than 2 years old; and Speccy says that the status of the HDD is good. Update 5/27/2014 The "4533MB" solution did not work. I had to reboot the computer about 30 minutes ago because the disk usage again hit 100%. When I opened Resource Monitor the C:\System (pagefile.sys) again was shown to be the culprit. I have now disabled pagefile entirely via the same window shown above in the screenshot. The number for "currently allocated" is now 0MB. Will update again in a couple days, or if the problem occurs again, whichever comes sooner.

  Read the article

• File server share access intermittent/slow/machine unstable: win2k8r2

  - by Jack B.

  I have a file server running Win2k8R2 on an older HP DL380G4. It has nothing set up on it other than file sharing. All drivers/firmware/updates installed. The file server is used as a dump for a bunch of test machines - so essentially a lot of small files are being written to it. It was working fine until it started showing the following symptoms: Shares became either very slow/intermittent or could not access them at all. Logging in the the server, you could use it like normal but windows would start freezing and eventually you had to hard reboot it because nothing was responsive. After rebooting, it would work fine for 20min-2hours and then degrade into this broken state again. Some info after investigation: HP Raid Config utility shows the Raid array as functioning properly (RAID5 btw). Event log shows a bunch of DoS attacks from the test machines, saying it has disconnected the connection a. AFAIK (not part of my job) the test machines haven't changed the way they log information to this server or the amount of them hasn't increased. b. Nothing is infected, this server was scanned fully, and the test machines are re-imaged almost daily. Nothing in performance monitor shows as anything being pegged at maximum (CPU/HD/Network/RAM) I installed MS Network Monitor and it is showing a lot of traffic The server was using one gigabit Ethernet connection, I connected the second one as well with the same results. Forgot to add - one of the commonly written to dirs on the share has over 16k subdirs in it, with a crapton of small files within those dirs. Some of the OS instability was slow access to the drive which has this directory - perfmon doesn't show much activity on the HD though so I'm not sure if this crowded dir is the cause. Here is one important fact: I ran into this issue 2-3 months ago, couldn't figure it out, but I had a spare identical machine so I swapped them out (thought it was related to the machine), and now I have the same issue. Also, the computer will be stable if I turn off file sharing. So is the server just getting DoS'd by the test machines? I've never dealt with such an issue. Is instability in the server's OS common when getting DoS'd? Is there anything I can do to confirm this before telling the owners of the test machines to optimize their traffic? (I'm not sure what they'll be able to do). Is there something within Win2k8R2 that can balance the traffic across the two NICs? Any help would be appreciated. Update: Another thought - the drive with the share is RAID5 across 6 SCSI320 300GB HDs. They are near full capacity about 100GB from 1TB left. Could the amount of tiny files could be causing some weirdness with the parity in this array? I think I've read something about this in the past but I'm no expert on RAID.

  Read the article

• mySQL Optimization Suggestions

  - by Brian Schroeter

  I'm trying to optimize our mySQL configuration for our large Magento website. The reason I believe that mySQL needs to be configured further is because New Relic has shown that our SELECT queries are taking a long time (20,000+ ms) in some categories. I ran MySQLTuner 1.3.0 and got the following results... (Disclaimer: I restarted mySQL earlier after tweaking some settings, and so the results here may not be 100% accurate): >> MySQLTuner 1.3.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering [OK] Currently running supported MySQL version 5.5.37-35.0 [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: +ARCHIVE +BLACKHOLE +CSV -FEDERATED +InnoDB +MRG_MYISAM [--] Data in MyISAM tables: 7G (Tables: 332) [--] Data in InnoDB tables: 213G (Tables: 8714) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [--] Data in MEMORY tables: 0B (Tables: 353) [!!] Total fragmented tables: 5492 -------- Security Recommendations ------------------------------------------- [!!] User '@host5.server1.autopartsnetwork.com' has no password set. [!!] User '@localhost' has no password set. [!!] User 'root@%' has no password set. -------- Performance Metrics ------------------------------------------------- [--] Up for: 5h 3m 4s (5M q [317.443 qps], 42K conn, TX: 18B, RX: 2B) [--] Reads / Writes: 95% / 5% [--] Total buffers: 35.5G global + 184.5M per thread (1024 max threads) [!!] Maximum possible memory usage: 220.0G (174% of installed RAM) [OK] Slow queries: 0% (6K/5M) [OK] Highest usage of available connections: 5% (61/1024) [OK] Key buffer size / total MyISAM indexes: 512.0M/3.1G [OK] Key buffer hit rate: 100.0% (102M cached / 45K reads) [OK] Query cache efficiency: 66.9% (3M cached / 5M selects) [!!] Query cache prunes per day: 3486361 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 812K sorts) [!!] Joins performed without indexes: 1328 [OK] Temporary tables created on disk: 11% (126K on disk / 1M total) [OK] Thread cache hit rate: 99% (61 created / 42K connections) [!!] Table cache hit rate: 19% (9K open / 49K opened) [OK] Open file limit used: 2% (712/25K) [OK] Table locks acquired immediately: 100% (5M immediate / 5M locks) [!!] InnoDB buffer pool / data size: 32.0G/213.4G [OK] InnoDB log waits: 0 -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Reduce your overall MySQL memory footprint for system stability Enable the slow query log to troubleshoot bad queries Increasing the query_cache size over 128M may reduce performance Adjust your join queries to always utilize indexes Increase table_cache gradually to avoid file descriptor limits Read this before increasing table_cache over 64: http://bit.ly/1mi7c4C Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 512M) [see warning above] join_buffer_size (> 128.0M, or always use indexes with joins) table_cache (> 12288) innodb_buffer_pool_size (>= 213G) My my.cnf configuration is as follows... [client] port = 3306 [mysqld_safe] nice = 0 [mysqld] tmpdir = /var/lib/mysql/tmp user = mysql port = 3306 skip-external-locking character-set-server = utf8 collation-server = utf8_general_ci event_scheduler = 0 key_buffer = 512M max_allowed_packet = 64M thread_stack = 512K thread_cache_size = 512 sort_buffer_size = 24M read_buffer_size = 8M read_rnd_buffer_size = 24M join_buffer_size = 128M # for some nightly processes client sessions set the join buffer to 8 GB auto-increment-increment = 1 auto-increment-offset = 1 myisam-recover = BACKUP max_connections = 1024 # max connect errors artificially high to support behaviors of NetScaler monitors max_connect_errors = 999999 concurrent_insert = 2 connect_timeout = 5 wait_timeout = 180 net_read_timeout = 120 net_write_timeout = 120 back_log = 128 # this table_open_cache might be too low because of MySQL bugs #16244691 and #65384) table_open_cache = 12288 tmp_table_size = 512M max_heap_table_size = 512M bulk_insert_buffer_size = 512M open-files-limit = 8192 open-files = 1024 query_cache_type = 1 # large query limit supports SOAP and REST API integrations query_cache_limit = 4M # larger than 512 MB query cache size is problematic; this is typically ~60% full query_cache_size = 512M # set to true on read slaves read_only = false slow_query_log_file = /var/log/mysql/slow.log slow_query_log = 0 long_query_time = 0.2 expire_logs_days = 10 max_binlog_size = 1024M binlog_cache_size = 32K sync_binlog = 0 # SSD RAID10 technically has a write capacity of 10000 IOPS innodb_io_capacity = 400 innodb_file_per_table innodb_table_locks = true innodb_lock_wait_timeout = 30 # These servers have 80 CPU threads; match 1:1 innodb_thread_concurrency = 48 innodb_commit_concurrency = 2 innodb_support_xa = true innodb_buffer_pool_size = 32G innodb_file_per_table innodb_flush_log_at_trx_commit = 1 innodb_log_buffer_size = 2G skip-federated [mysqldump] quick quote-names single-transaction max_allowed_packet = 64M I have a monster of a server here to power our site because our catalog is very large (300,000 simple SKUs), and I'm just wondering if I'm missing anything that I can configure further. :-) Thanks!

  Read the article

• File server share access intermittent/slow/machine unstable: win2kr2

  - by Jack B.

  I have a file server running Win2k8R2 on an older HP DL380G4. It has nothing set up on it other than file sharing. All drivers/firmware/updates installed. The file server is used as a dump for a bunch of test machines - so essentially a lot of small files are being written to it. It was working fine until it started showing the following symptoms: Shares became either very slow/intermittent or could not access them at all. Logging in the the server, you could use it like normal but windows would start freezing and eventually you had to hard reboot it because nothing was responsive. After rebooting, it would work fine for 20min-2hours and then degrade into this broken state again. Some info after investigation: HP Raid Config utility shows the Raid array as functioning properly (RAID5 btw). Event log shows a bunch of DoS attacks from the test machines, saying it has disconnected the connection a. AFAIK (not part of my job) the test machines haven't changed the way they log information to this server or the amount of them hasn't increased. b. Nothing is infected, this server was scanned fully, and the test machines are re-imaged almost daily. Nothing in performance monitor shows as anything being pegged at maximum (CPU/HD/Network/RAM) I installed MS Network Monitor and it is showing a lot of traffic The server was using one gigabit Ethernet connection, I connected the second one as well with the same results. Forgot to add - one of the commonly written to dirs on the share has over 16k subdirs in it, with a crapton of small files within those dirs. Some of the OS instability was slow access to the drive which has this directory - perfmon doesn't show much activity on the HD though so I'm not sure if this crowded dir is the cause. Here is one important fact: I ran into this issue 2-3 months ago, couldn't figure it out, but I had a spare identical machine so I swapped them out (thought it was related to the machine), and now I have the same issue. Also, the computer will be stable if I turn off file sharing. So is the server just getting DoS'd by the test machines? I've never dealt with such an issue. Is instability in the server's OS common when getting DoS'd? Is there anything I can do to confirm this before telling the owners of the test machines to optimize their traffic? (I'm not sure what they'll be able to do). Is there something within Win2k8R2 that can balance the traffic across the two NICs? Any help would be appreciated. Update: Another thought - the drive with the share is RAID5 across 6 SCSI320 300GB HDs. They are near full capacity about 100GB from 1TB left. Could the amount of tiny files could be causing some weirdness with the parity in this array? I think I've read something about this in the past but I'm no expert on RAID.

  Read the article

• How to use iptables to forward all data from an IP to a Virtual Machine

  - by jro

  OK, in an attempt to get some response, a TL;DR version. I know that the following command: iptables -A PREROUTING -t nat -i eth0 --dport 80 --source 1.1.1.1 -j REDIRECT --to-port 8080 ... will redirect all traffic from port 80 to port 8080. The problem is that I have to do this for every port that is to be redirected. To be future-proof, I want all ports for an IP to be redirected to a different (internal) IP, so that if one might decide to enable SSH, they can directly connect without worrying about iptables. What is needed to reliable forward all traffic from an external IP, to an internal IP, and vice versa? Extended version I've scoured the internet for this, but I never got a solid answer. What I have is one physical server (HOST), with several virtual machines (VM) that need traffic redirected to them. Just getting it to work with a single machine is enough for now. The VM's run under VirtualBox, and are set to use a host-only adapter (vboxnet0). Everything seems to work, but it is greatly lagging. Both the host (CentOS 5.6) and the guest (Ubuntu 10.04) machine are running Linux. What I did was the following: Configure the VM to have a static IP in the network of the vboxnet0 adapter. Add an IP alias to the host, registering to the dedicated (outside) IP. Setup iptables to allow traffic to come through (via sysctl). Configure iptables to DNAT and SNAT data from a given IP address to the internal address. iptables commands: sudo iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT sudo iptables -A POSTROUTING -t nat -j MASQUERADE iptables -t nat -I PREROUTING -d $OUT_IP -I eth0 -j DNAT --to-destination $IN_IP iptables -t nat -I POSTROUTING -s $IN_IP -o eth0 -j SNAT --to-source $OUT_IP Now the site works, but is really, really slow. I'm hoping I missed something simple, but I'm out of ideas for now. Some background info: before this, the site was working with basic port forwarding. E.g. port 80 was mapped to port 8080 using iptables. In VirtualBox (having the network adapter configured as NAT), a port forwarding the other way around made things work beautifully. The problem was twofold: first, multiple ports needed to be forwarded (for admin interfaces, https, ssh, etc). Second, it only allowed one IP address to use port 80. To resolve things, multiple external IP addresses are used for different (sub)domains. Likewise, the "VirtualBox" network will contain the virtual machines: DNS Ext. IP Adapter VM "VirtalBox" IP ------------------------------------------------------------------ a.example.com 1.1.1.1 eth0:1 vm_guest_1 192.168.56.1 b.example.com 2.2.2.2 eth0:2 vm_guest_2 192.168.56.2 c.example.com 3.3.3.3 eth0:3 vm_guest_3 192.168.56.3 And so on. Put simply, the goal is to channel all traffic from a.example.com to vm_guest_1 (of put differently, from 1.1.1.1 to 192.168.56.1). And achieve this with an acceptable speed :).

  Read the article

• My 3D Games crashing in these scenarios

  - by desaivv

  I have a situation here which I am unable to solve. I bought a PC last year March, here are my specs: Intel Core i3 550 @ 3GHz 4 GB RAM @400 MHz XFX GeForce 9500 GT graphics card 1GB @550MHz 500 GB HDD Lately as soon as I load my save game of Skyrim, it crashes. I have been playing Skyrim since I joined Gaming.SE site. Crashes as in the entire scene gets red lines. I can not ALT + TAB back or even CTRL + ALT + DEL either. My only recourse is a hard reset via the power button. Can not take a screen shot either. I have the latest Forceware 296.10 drivers also. This has been happening since the last 2 weeks. I always use Driver Sweeper to clean my old drivers, since that is what XFXForce recommends before installing new drivers. I installed MSI Afterburner lately to see my GPU temperature. My GPU is default, never over-clocked it. In MSI's Afterburner, I can not adjust fan speed. It is greyed out. Also in settings there is no fan tab. With normal Internet browsing it stays at 51 C. Ran Memtest86 over night with level 11. Took about 13 hours, but no errors in my RAM. I even re-installed my OS, with just the 296 drivers. The fan for the GPU does come on. I can play Diablo 2. I can not get past Warcraft 3's menu selection. There WAS some dust in my machine, but I always try and keep everything clean, since in my home town dust is an issue. Always keep cool my entire PC cabinet. My friend came with his functioning graphics card, we bought our PCs at the same time with exact same specifications. His card did not work either. Same problem with the scene freezing with red lines. I did do my research before posting here. That is how I was able to learn about MSI Afterburner, Driver Sweeper, SpeedFan etc. I followed posts on Tom's Hardware too regarding people that had similar problems. One person suggested and was followed by worked as well the suggestion to "Bake the card in an oven". Since I bought it, played Diablo 2 for months, Starcraft 2 campaign for months and Skyrim recently for months. Bought ME3 also. I am at my wits end. I do not know what else to do. I can go out and buy a card, but my friend's card did not work either. I can use the machine for Eclipse or VS2010 development just fine. Just not with 3D gaming. I originally posted this question on Gaming.SE But I was directed here. I have browsed the SU database for my problem and found this, this, and this. But none of these cover my question. My machine is only one year old. Can some experienced superuser(s) shed some light on this scenario? Is it a 3D graphics card problem? Will a brand new card work? What else can I try to pin point the problem? Can it be the Motherboard? Thanks.

  Read the article

• Connecting PC to TV via HDMI/DVI: Windows XP doesn't allow the appropriate screen resolution

  - by Jørgen

  I have a computer that is connected to the living room TV (a Panasonic) via HDMI. There is no other monitor connected. My problem is that the computer, which is running Windows XP, does not allow me to set the proper resolution for the TV. Both the graphics adapter and the TV should support the 1280x720 resolution, but it cannot be selected - the only available options are 1280x600 and 800x600, both in the "native" Windows dialog box and the custom Intel graphics options dialog box. Do anyone have a suggestion for a solution for this? Things I've thought of: Setting the resolution directly in the registry (where?) Installing some "custom" monitor driver (the TV manufacturer does not appear to provide any, currently the "generic" one is used) Details on the setup: Connection: DVI output on the computer via a passive DVI-HDMI adapter to the HDMI input on the TV, audio is run on a separate link, the TV is able to combine video and audio without any problem, the problem is there regardless of whether or not the audio is connected. The connection is several meters long through some walls, for this reason using a VGA cable instead is not an option. Note that the report explicitly says that the TV supports 1280x720. Still, I am not allowed to select it in Graphics Options, only 1280x600 and 800x600 is available. For 800x600, there's a lot of black around the edges; for 1280x600, the screen is "zoomed" so the edges of the monitor image (like the taskbar) is not visible. Other: The computer is running Windows XP. More recent versions of Windows are not an option (I have no licence). Linux is probably not an option (some of the video streaming sites I plan to use do not support it, I think) I wrote the rest of the details below. Thanks for any help!! TV: Panasonic TX-L32X10Y, European version; a 720p 32" quite "regular" LCD TV. Allowed resolutions according to manual: Signal name: 640x480 @60HZ Horizontal frequency: 31.47 kHz Vertical frequency: 60Hz Signal name: 750/720) /60p Horizontal frequency: 45.00 kHz Vertical frequency: 60Hz Signal name: 1,125 (1,080) / 60p Horizontal frequency: 67.50 kHz Vertical frequency: 60Hz (this is exactly how the manual presents it. PC via D-SUB (VGA cable) and "regular" HDMI have more alternatives.) Messing with the "zoom" settings on the TV does not affect the available resolution options on the computer. Computer: The following is a printout from one of the graphics adapter option pages. I think it covers most of it. The computer is a Dell. INTEL(R) EXTREME GRAPHICS 2 REPORT Report Date: 04/17/2011 Report Time[hr:mm:ss]: 20:18:02 Driver Version: 6.14.10.4396 Operating System: Windows XP* Professional, Service Pack 3 (5.1.2600) Default Language: English DirectX* Version: 9.0 Physical Memory: 1021 MB Minimum Graphics Memory: 1 MB Maximum Graphics Memory: 96 MB Graphics Memory in Use: 6 MB Processor: x86 Processor Speed: 2593 MHZ Vendor ID: 8086 Device ID: 2572 Device Revision: 02 * Accelerator Information * Accelerator in Use: Intel(R) 82865G Graphics Controller Video BIOS: 2972 Current Graphics Mode: 1280 by 600 True Color (60 Hz) * Devices Connected to the Graphics Accelerator * Active Digital Displays: 1 * Digital Display * Monitor Name: Plug and Play Monitor Display Type: Digital Gamma Value: 2.20 DDC2 Protocol: Supported Maximum Image Size: Horizontal: Not Available Vertical: Not Available Monitor Supported Modes: 1280 by 720 (50 Hz) 1280 by 720 (60 Hz) Display Power Management Support: Standby Mode: Not Supported Suspend Mode: Not Supported Active Off Mode: Not Supported (disclaimer: this question was also asked at the Wikipedia Reference Desk some time ago and might show up in a Google search. I got no useful answers there.)

  Read the article

• Tips / techniques for high-performance C# server sockets

  - by McKenzieG1

  I have a .NET 2.0 server that seems to be running into scaling problems, probably due to poor design of the socket-handling code, and I am looking for guidance on how I might redesign it to improve performance. Usage scenario: 50 - 150 clients, high rate (up to 100s / second) of small messages (10s of bytes each) to / from each client. Client connections are long-lived - typically hours. (The server is part of a trading system. The client messages are aggregated into groups to send to an exchange over a smaller number of 'outbound' socket connections, and acknowledgment messages are sent back to the clients as each group is processed by the exchange.) OS is Windows Server 2003, hardware is 2 x 4-core X5355. Current client socket design: A TcpListener spawns a thread to read each client socket as clients connect. The threads block on Socket.Receive, parsing incoming messages and inserting them into a set of queues for processing by the core server logic. Acknowledgment messages are sent back out over the client sockets using async Socket.BeginSend calls from the threads that talk to the exchange side. Observed problems: As the client count has grown (now 60-70), we have started to see intermittent delays of up to 100s of milliseconds while sending and receiving data to/from the clients. (We log timestamps for each acknowledgment message, and we can see occasional long gaps in the timestamp sequence for bunches of acks from the same group that normally go out in a few ms total.) Overall system CPU usage is low (< 10%), there is plenty of free RAM, and the core logic and the outbound (exchange-facing) side are performing fine, so the problem seems to be isolated to the client-facing socket code. There is ample network bandwidth between the server and clients (gigabit LAN), and we have ruled out network or hardware-layer problems. Any suggestions or pointers to useful resources would be greatly appreciated. If anyone has any diagnostic or debugging tips for figuring out exactly what is going wrong, those would be great as well. Note: I have the MSDN Magazine article Winsock: Get Closer to the Wire with High-Performance Sockets in .NET, and I have glanced at the Kodart "XF.Server" component - it looks sketchy at best.

  Read the article

• <msbuild/> task fails while <devenv/> succeeds for MFC application in CruiseControl.NET?

  - by ee

  The Overview I am working on a Continuous Integration build of a MFC appliction via CruiseControl.net and VS2010. When building my .sln, a "Visual Studio" CCNet task (<devenv/>) works, but a simple MSBuild wrapper script (see below) run via the CCNet <msbuild/> task fails with errors like: error RC1015: cannot open include file 'winres.h'.. error C1083: Cannot open include file: 'afxwin.h': No such file or directory error C1083: Cannot open include file: 'afx.h': No such file or directory The Question How can I adjust the build environment of my msbuild wrapper so that the application builds correctly? (Pretty clearly the MFC paths aren't right for the msbuild environment, but how do i fix it for MSBuild+VS2010+MFC+CCNet?) Background Details We have successfully upgraded an MFC application (.exe with some MFC extension .dlls) to Visual Studio 2010 and can compile the application without issue on developer machines. Now I am working on compiling the application on the CI server environment I did a full installation of VS2010 (Professional) on the build server. In this way, I knew everything I needed would be on the machine (one way or another) and that this would be consistent with developer machines. VS2010 is correctly installed on the CI server, and the devenv task works as expected I now have a wrapper MSBuild script that does some extended version processing and then builds the .sln for the application via an MSBuild task. This wrapper script is run via CCNet's MSBuild task and fails with the above mentioned errors The Simple MSBuild Wrapper <?xml version="1.0" encoding="utf-8"?> <Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <Target Name="Build"> <!-- Doing some versioning stuff here--> <MSBuild Projects="target.sln" Properties="Configuration=ReleaseUnicode;Platform=Any CPU;..." /> </Target> </Project> My Assumptions This seems to be a missing/wrong configuration of include paths to standard header resources of the MFC persuasion I should be able to coerce the MSBuild environment to consider the relevant resource files from my VS2010 install and have this approach work. Given the vs2010 msbuild support for visual c++ projects (.vcxproj), shouldn't msbuilding a solution be pretty close to compiling via visual studio? But how do I do that? Am I setting Environment variables? Registry settings? I can see how one can inject additional directories in some cases, but this seems to need a more systemic configuration at the compiler defaults level. Update 1 This appears to only ever happen in two cases: resource compilation (rc.exe), and precompiled header (stdafx.h) compilation, and only for certain projects? I was thinking it was across the board, but indeed it appears only to be in these cases. I guess I will keep digging and hope someone has some insight they would be willing to share...

  Read the article

• Python Memory leak - Solved, but still puzzled

  - by disappearedng

  Dear everyone, I have successfully debugged my own memory leak problems. However, I have noticed some very strange occurence. for fid, fv in freqDic.iteritems(): outf.write(fid+"\t") #ID for i, term in enumerate(domain): #Vector tfidf = self.tf(term, fv) * self.idf( term, docFreqDic) if i == len(domain) - 1: outf.write("%f\n" % tfidf) else: outf.write("%f\t" % tfidf) outf.flush() print "Memory increased by", int(self.memory_mon.usage()) - startMemory outf.close() def tf(self, term, freqVector): total = freqVector[TOTAL] if total == 0: return 0 if term not in freqVector: ## When you don't have these lines memory leaks occurs return 0 ## return float(freqVector[term]) / freqVector[TOTAL] def idf(self, term, docFrequencyPerTerm): if term not in docFrequencyPerTerm: return 0 return math.log( float(docFrequencyPerTerm[TOTAL])/docFrequencyPerTerm[term]) Basically let me describe my problem: 1) I am doing tfidf calculations 2) I traced that the source of memory leaks is coming from defaultdict. 3) I am using the memory_mon from http://stackoverflow.com/questions/276052/how-to-get-current-cpu-and-ram-usage-in-python 4) The reason for my memory leaks is as follows: a) in self.tf, if the lines: if term not in freqVector: return 0 are not added that will cause the memory leak. (I verified this myself using memory_mon and noticed a sharp increase in memory that kept on increasing) The solution to my problem was 1) since fv is a defaultdict, any reference to it that are not found in fv will create an entry. Over a very large domain, this will cause memory leaks. I decided to use dict instead of default dict and the memory problem did go away. My only puzzle is: since fv is created in "for fid, fv in freqDic.iteritems():" shouldn't fv be destroyed at the end of every for loop? I tried putting gc.collect() at the end of the for loop but gc was not able to collect everything (returns 0). Yes, the hypothesis is right, but the memory should stay fairly consistent with ever for loop if for loops do destroy all temp variables. This is what it looks like with that two line in self.tf: Memory increased by 12 Memory increased by 948 Memory increased by 28 Memory increased by 36 Memory increased by 36 Memory increased by 32 Memory increased by 28 Memory increased by 32 Memory increased by 32 Memory increased by 32 Memory increased by 40 Memory increased by 32 Memory increased by 32 Memory increased by 28 and without the the two line: Memory increased by 1652 Memory increased by 3576 Memory increased by 4220 Memory increased by 5760 Memory increased by 7296 Memory increased by 8840 Memory increased by 10456 Memory increased by 12824 Memory increased by 13460 Memory increased by 15000 Memory increased by 17448 Memory increased by 18084 Memory increased by 19628 Memory increased by 22080 Memory increased by 22708 Memory increased by 24248 Memory increased by 26704 Memory increased by 27332 Memory increased by 28864 Memory increased by 30404 Memory increased by 32856 Memory increased by 33552 Memory increased by 35024 Memory increased by 36564 Memory increased by 39016 Memory increased by 39924 Memory increased by 42104 Memory increased by 42724 Memory increased by 44268 Memory increased by 46720 Memory increased by 47352 Memory increased by 48952 Memory increased by 50428 Memory increased by 51964 Memory increased by 53508 Memory increased by 55960 Memory increased by 56584 Memory increased by 58404 Memory increased by 59668 Memory increased by 61208 Memory increased by 62744 Memory increased by 64400 I look forward to your answer

  Read the article

• Android: OutofMemoryError: bitmap size exceeds VM budget with no reason I can see.

  - by Meymann

  Hi. I am having an OutOfMemory exception with a gallery over 600x800 pixels JPEG's. The environment I've been using Gallery with JPG images around 600x800 pixels. Since my content may be a bit more complex than just images, I have set each view to be a RelativeLayout that wraps ImageView with the JPG. In order to "speed up" the user experience I have a simple cache of 4 slots that prefetches (in a looper) about 1 image left and 1 image right to the displayed image and keeps them in a 4 slot HashMap. The platform I am using AVD of 256 RAM and 128 Heap Size, with a 600x800 screen. It also happens on an Entourage Edge target, except that with the device it's harder to debug. The problem I have been getting an exception: OutofMemoryError: bitmap size exceeds VM budget And it happens when fetching the fifth image. I have tried to change the size of my image cache, and it is still the same. The strange thing: There should not be a memory problem In order to make sure the heap limit is very far away from what I need, I have defined a dummy 8MB array in the beginning, and left it unreferenced so it's immediately dispatched. It is a member of the activity thread and is defined as following static { @SuppressWarnings("unused") byte dummy[] = new byte[ 8*1024*1024 ]; } The result is that the heap size is nearly 11MB and it's all free. Note I have added that trick after it began to crash. It makes OutOfMemory less frequent. Now, I am using DDMS. Just before the crash (does not change much after the crash), DDMS shows: ID Heap Size Allocated Free %Used #Objects 1 11.195 MB 2.428 MB 8.767 MB 21.69% 47,156 And in the detail table it shows: Type Count Total Size Smallest Largest Median Average free 1,536 8.739MB 16B 7.750MB 24B 5.825KB The largest block is 7.7MB. And yet the LogCat says: ERROR/dalvikvm-heap(1923): 925200-byte external allocation too large for this process. If you mind the relation of the median and the average, it is plausible to assume that most of the available blocks are very small. However, there is a block large enough for the bitmap, it's 7.7M. How come it is still not enough? Note: I recorded a heap trace. When looking at the amount of data allocated, it does not feel like more than 2M is allocated. It does match the free memory report by DDMS. Could it be that I experience some problem like heap-fragmentation? How do I solve/workaround the problem? Is the heap shared to all threads? Could it be that I interpret the DDMS readout in a wrong way, and there is really no 900K block to allocate? If so, can anybody please tell me where I can see that? Thanks a lot Meymann

  Read the article

• Build failing - VS2010 solution on TFS2008

  - by Nick

  I have migrated a VS2008 ASP.NET MVC solution to VS2010/MVC2/.NET 4.0 The solution builds locally and all unit tests pass. Our TFS server is still TFS2008 and I am having problems getting the CI build to pass. The projects all build successfully, the unit tests all run and pass but the Running Tests item fails. I followed this blog post on how to get the build working and I'm almost there. Combing the log file for failures I have found the following: Test Run Completed. Passed 1101 ------------ Total 1101 Results file: C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\TestResults\apptemetrybuild_ATT15DEV01 2010-04-27 09_09_59_Any CPU_Release.trx Test Settings: Default Test Settings Waiting to publish... Publishing results of test run apptemetrybuild@ATT15DEV01 2010-04-27 09:09:59_Any CPU_Release to http://att15tfs01:8080/... .....Publish completed successfully. Command: D:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\MSTest.exe /nologo /searchpathroot:"C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\Binaries\Release" /resultsfileroot:"C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\TestResults" /testcontainer:"C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\Binaries\Release\\Attenda.Stargate.Security.Tests.dll" /publish:"http://att15tfs01:8080/" /publishbuild:"vstfs:///Build/Build/149" /teamproject:"Client Portal 3" /platform:"Any CPU" /flavor:"Release" The "TestToolsTask" task is using "MSTest.exe" from "D:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\MSTest.exe". Loading C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\Binaries\Release\\Attenda.Stargate.Security.Tests.dll... C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\Binaries\Release\\Attenda.Stargate.Security.Tests.dll Could not load file or assembly 'file:///C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\Binaries\Release\Attenda.Stargate.Security.Tests.dll' or one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded. MSBUILD : warning MSB6006: "MSTest.exe" exited with code 1. [C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\BuildType\TFSBuild.proj] The previous error was converted to a warning because the task was called with ContinueOnError=true. Build continuing because "ContinueOnError" on the task "TestToolsTask" is set to "true". Done executing task "TestToolsTask" -- FAILED. It looks like it's trying to use the 2008 MSTest tool even though I have specified ToolsVersion="4.0" in the tfsbuild.proj and changed the MSBuildPath in the TfsBuildService.exe.config on the build server. Can anyone point me in the right direction to get this to build successfully? Many thanks, Nick

  Read the article

• Eventlet or gevent or Stackless + Twisted, Pylons, Django and SQL Alchemy

  - by Khorkrak

  We're using Twisted extensively for apps requiring a great deal of asynchronous io. There are some cases where stuff is cpu bound instead and for that we spawn a pool of processes to do the work and have a system for managing these across multiple servers as well - all done in Twisted. Works great. The problem is that it's hard to bring new team members up to speed. Writing asynchronous code in Twisted requires a near vertical learning curve. It's as if humans just don't think that way naturally. We're considering a mixed approach perhaps. Maybe do the xmlrpc server part and process management in Twisted still but the other stuff in code that at least looks synchronous while not being as such. Then again I like explicit over implicit so hmmm. Anyway onto greenlets - how well does that stuff work? So there's Stackless and as you can see from my Gallentean avatar I'm well aware of the tremendous success in it's use for CCP's flagship EVE Online game first hand. What about Eventlet or gevent? Well for now only Eventlet works with Twisted. However gevent claims to be faster since it's not a pure python implementation it instead uses libevent. It also has fewer idiosyncrasies and defects supposedly. The documentation there is minimal in comparison to Eventlet and it's maintained by 1 guy as far as I can tell. This makes me leery but all great projects start this way so... Then there's PyPy - I haven't even finished reading about that one yet - just saw it in this thread: Drawbacks of Stackless. So confusing - I'm wondering what the heck to do - sounds like Eventlet is probably the best bet but is it really stable enough? Anyone out there have any experience with it? Should we go with Stackless instead as it's been around and is proven technology - just like Twisted is as well - and they do work together nicely. But still I hate having to have a separate version of Python to do this. what to do.... This somewhat obnoxious blog entry hit the nail on the head for me though: Asynchronous IO for Grownups We're stuck using MySQL as well - I never knew how great PostgreSQL was until having had to work on a production OLTP system in MySQL instead - but that's another story. But if that monkey patch thing really works then wow. Just wow.

  Read the article

• Why is drawing to OnPaint graphics faster than image graphics?

  - by Tesserex

  I'm looking for a way to speed up the drawing of my game engine, which is currently the significant bottleneck, and is causing slowdowns. I'm on the verge of converting it over to XNA, but I just noticed something. Say I have a small image that I've loaded. Image img = Image.FromFile("mypict.png"); We have a picturebox on the screen we want to draw on. So we have a handler. pictureBox1.Paint += new PaintEventHandler(pictureBox1_Paint); I want our loaded image to be tiled on the picturebox (this is for a game, after all). Why on earth is this code: void pictureBox1_Paint(object sender, PaintEventArgs e) { for (int y = 0; y < 16; y++) for (int x = 0; x < 16; x++) e.Graphics.DrawImage(image, x * 16, y * 16, 16, 16); } over 25 TIMES FASTER than this code: Image buff = new Bitmap(256, 256, PixelFormat.Format32bppPArgb); // actually a form member void pictureBox1_Paint(object sender, PaintEventArgs e) { using (Graphics g = Graphics.FromImage(buff)) { for (int y = 0; y < 16; y++) for (int x = 0; x < 16; x++) g.DrawImage(image, x * 16, y * 16, 16, 16); } e.Graphics.DrawImage(buff, 0, 0, 256, 256); } To eliminate the obvious, I've tried commenting out the last e.Graphics.DrawImage (which means I don't see anything, but it gets rid a call that isn't in the first example). I've also left in the using block (needlessly) in the first example, but it's still just as blazingly fast. I've set properties of g to match e.Graphics - things like InterpolationMode, CompositingQuality, etc, but nothing I do bridges this incredible gap in performance. I can't find any difference between the two Graphics objects. What gives? My test with a System.Diagnostics.Stopwatch says that the first code snippet runs at about 7100 fps, while the second runs at a measly 280 fps. My reference image is VS2010ImageLibrary\Objects\png_format\WinVista\SecurityLock.png, which is 48x48 px, and which I modified to be 72 dpi instead of 96, but those made no difference either.

  Read the article

• C++ vs Matlab vs Python as a main language for Computer Vision Postgraduate

  - by Hough

  Hi all, Firstly, sorry for a somewhat long question but I think that many people are in the same situation as me and hopefully they can also gain some benefit from this. I'll be starting my PhD very soon which involve the fields of computer vision, pattern recognition and machine learning. Currently, I'm using opencv (2.1) C++ interface and I especially like its powerful Mat class and the overloaded operations available for matrix and image seamless operations and transformations. I've also tried (and implemented many small vision projects) using opencv python interface (new bindings; opencv 2.1) and I really enjoy python's ability to integrate opencv, numpy, scipy and matplotlib. But recently, I went back to opencv C++ interface because I felt that the official python new bindings were not stable enough and no overloaded operations are available for matrices and images, not to mention the lack of machine learning modules and slow speeds in certain operations. I've also used Matlab extensively in the past and although I've used mex files and other means to speed up the program, I just felt that Matlab's performance was inadequate for real-time vision tasks, be it for fast prototyping or not. When the project becomes larger and larger, many tasks have to be re-written in C and compiled into Mex files increasingly and Matlab becomes nothing more than a glue language. Here comes the sub-questions: For postgrad studies in these fields (machine learning, vision, pattern recognition), what is your main or ideal programming language for rapid prototyping of ideas and testing algorithms contained in papers? For postgrad studies, can you list down the pros and cons of using the following languages? C++ (with opencv + gsl + svmlib + other libraries) vs Matlab (with all its toolboxes) vs python (with the imcomplete opencv bindings + numpy + scipy + matplotlib). Are there computer vision PhD/postgrad students here who are using only C++ (with all its availabe libraries including opencv) without even needing to resort to Matlab or python? In other words, given the current existing computer vision or machine learning libraries, is C++ alone sufficient for fast prototyping of ideas? If you're currently using Java or C# for your postgrad work, can you list down the reasons why they should be used and how they compare to other languages in terms of available libraries? What is the de facto vision/machine learning programming language and its associated libraries used in your university research group? Thanks in advance.

  Read the article

• Intermittent PolicyException: Execution permission cannot be acquired.

  - by Aaron Maenpaa

  We are intermittently seeing the following exception shortly after an App Pool recycle in an ASP.NET application: System.Configuration.ConfigurationErrorsException: Could not load file or assembly 'Microsoft.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Failed to grant permission to execute. (Exception from HRESULT: 0x80131418) ---> System.IO.FileLoadException: Could not load file or assembly 'Microsoft.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Failed to grant permission to execute. (Exception from HRESULT: 0x80131418) File name: 'Microsoft.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' ---> System.Security.Policy.PolicyException: Execution permission cannot be acquired. at System.Security.SecurityManager.ResolvePolicy(Evidence evidence, PermissionSet reqdPset, PermissionSet optPset, PermissionSet denyPset, PermissionSet& denied, Boolean checkExecutionPermission) at System.Security.SecurityManager.ResolvePolicy(Evidence evidence, PermissionSet reqdPset, PermissionSet optPset, PermissionSet denyPset, PermissionSet& denied, Int32& securitySpecialFlags, Boolean checkExecutionPermission) at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.Reflection.Assembly.Load(String assemblyString) at System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) The specific DLL that fails to load varies from incident to incident, but is always one referenced by the main assembly. We're running on ASP.NET 3.5 on Windows Server 2008. This seems to happen in batches affecting some but not all of sites on the same App Pool. We have a large number of sites all running the same code. Once a site has failed to load a DLL it throws up a Yellow Screen of Death until the next App Pool recycle. We haven't been able to reproduce this behavior and the sites seem to work fine for days or weeks at a time (and many App Pool recycles) before failing. Has anybody else seen similar behavior? Update: We've tried reproducing the failure by setting up a few hundred sites and writing a script to hit them repeatedly while recycling the App Pool once every couple of minutes and were unable to accomplish much other than loading down the server's CPU for a few days straight. We then tried messing (locking one of the DLLs, changing the file permissions) with the copies of the DLLs that ASP.NET makes and managed to reproduce similar behavior but not the same exception. Does anybody have any ideas on how to adjust the security policy to get it to throw a System.Security.Policy.PolicyException: Execution permission cannot be acquired. when loading a specific DLL?

  Read the article

• "Bad binary signature" in ASP.NET MVC application

  - by David M

  We are getting the error above on some pages of an ASP.NET MVC application when it is deployed to a 64 bit Windows 2008 server box. It works fine on our development machines, though these are 32 bit XP. Just wondered if anyone had encountered this before, and has any suggestions? Details as follows: Bad binary signature. (Exception from HRESULT: 0x80131192) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: Bad binary signature. (Exception from HRESULT: 0x80131192) All projects are set to compile for Any CPU, and are compiled in Release mode. The ASP.NET site is precompiled, and the precompiled build is on a 64 bit Windows 2008 TeamCity build agent. Thanks in advance. EDIT We're still plagued by this. I have looked at all the binaries in the website's bin directory using corflags.exe. None has the 32BIT flag set, and all have a CorFlags value of 9 except for Antlr3.Runtime.dll which has a value of 1. The problem only affects certain pages, and it seems to be those which use FluentValidation (including FluentValidation.Mvc and FluentValidation.xValIntegration assemblies). None of these shows anything out of the ordinary when inspected with corflags.exe, and there are no odd looking dependencies revealed by ildasm. When built locally (32 bit Windows XP) the site deploys and runs fine. When built on the build agents (64 bit Windows 2008 Server) the site displays these errors. The site runs in Integrated Pipeline mode, and is not set to 32 bit. The stack trace is: [COMException (0x80131192): Bad binary signature. (Exception from HRESULT: 0x80131192)] ASP.views_user_newinternal_aspx.__RenderContent2(HtmlTextWriter __w, Control parameterContainer) in e:\TeamCity\buildAgent\work\605ee6b4a5d1dd36\...Admin.Mvc\Views\User\NewInternal.aspx:53 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115 ASP.views_shared_site_master.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in e:\TeamCity\buildAgent\work\605ee6b4a5d1dd36\...Admin.Mvc\Views\Shared\Site.Master:26 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.Page.Render(HtmlTextWriter writer) +38 System.Web.Mvc.ViewPage.Render(HtmlTextWriter writer) +94 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4240

  Read the article

• ffmpeg - How to determine if -movflags faststart is enabled? PHP

  - by IIIOXIII

  While I am able to encode an mp4 file which I can plan on my local windows machine, I am having trouble encoding files to mp4 which are readable when streaming by safari, etc. After a bit of reading, I believe my issue is that I must move the metadata from the end of the file to the beginning in order for the converted mp4 files to be streamable. To that end, I am trying to find out if the build of ffmpeg that I am currently using is able to use the -movflags faststart option through php - as my current outputted mp4 files are not working when streamed online. This is the way I am now echoing the -help, -formats, -codecs, but I am not seeing anything about -movflags faststart in any of the lists: exec($ffmpegPath." -help", $codecArr); for($ii=0;$ii<count($codecArr);$ii++){ echo $codecArr[$ii].'</br>'; } Is there a similar method of determining if -movflags fastart is available to my ffmpeg build? Any other way? Should it be listed with any of the previously suggested commands? -help/-formats? Can someone that knows it is enabled in their version of ffmpeg check to see if it is listed under -help or -formats, etc.? TIA. EDIT: COMPLETE CONSOLE OUTPUT FOR BOTH THE CONVERSION COMMAND AND -MOVFLAGS COMMAND BELOW: COMMAND: ffmpeg_new -i C:\vidtests\Wildlife.wmv -s 640x480 C:\vidtests\Wildlife.mp4 OUTPUT: ffmpeg version N-54207-ge59fb3f Copyright (c) 2000-2013 the FFmpeg developers built on Jun 25 2013 21:55:00 with gcc 4.7.3 (GCC) configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-av isynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enab le-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetyp e --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --ena ble-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-l ibopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libsp eex --enable-libtheora --enable-libtwolame --enable-libvo-aacenc --enable-libvo- amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs -- enable-libxvid --enable-zlib libavutil 52. 37.101 / 52. 37.101 libavcodec 55. 17.100 / 55. 17.100 libavformat 55. 10.100 / 55. 10.100 libavdevice 55. 2.100 / 55. 2.100 libavfilter 3. 77.101 / 3. 77.101 libswscale 2. 3.100 / 2. 3.100 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 3.100 / 52. 3.100 [asf @ 00000000002ed760] Stream #0: not enough frames to estimate rate; consider increasing probesize Guessed Channel Layout for Input Stream #0.0 : stereo Input #0, asf, from 'C:\vidtests\Wildlife.wmv' : Metadata: SfOriginalFPS : 299700 WMFSDKVersion : 11.0.6001.7000 WMFSDKNeeded : 0.0.0.0000 comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball title : Wildlife in HD copyright : -¬ 2008 Microsoft Corporation IsVBR : 0 DeviceConformanceTemplate: AP@L3 Duration: 00:00:30.09, start: 0.000000, bitrate: 6977 kb/s Stream #0:0(eng): Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz, stereo, fltp , 192 kb/s Stream #0:1(eng): Video: vc1 (Advanced) (WVC1 / 0x31435657), yuv420p, 1280x7 20, 5942 kb/s, 29.97 tbr, 1k tbn, 1k tbc [libx264 @ 00000000002e6980] using cpu capabilities: MMX2 SSE2Fast SSSE3 Cache64 [libx264 @ 00000000002e6980] profile High, level 3.0 [libx264 @ 00000000002e6980] 264 - core 133 r2334 a3ac64b - H.264/MPEG-4 AVC cod ec - Copyleft 2003-2013 - http://www.videolan.org/x264.html - options: cabac=1 r ef=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed _ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pski p=1 chroma_qp_offset=-2 threads=3 lookahead_threads=1 sliced_threads=0 nr=0 deci mate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_ adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=2 5 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.6 0 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'C:\vidtests\Wildlife.mp4': Metadata: SfOriginalFPS : 299700 WMFSDKVersion : 11.0.6001.7000 WMFSDKNeeded : 0.0.0.0000 comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball title : Wildlife in HD copyright : -¬ 2008 Microsoft Corporation IsVBR : 0 DeviceConformanceTemplate: AP@L3 encoder : Lavf55.10.100 Stream #0:0(eng): Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 6 40x480, q=-1--1, 30k tbn, 29.97 tbc Stream #0:1(eng): Audio: aac (libvo_aacenc) ([64][0][0][0] / 0x0040), 44100 Hz, stereo, s16, 128 kb/s Stream mapping: Stream #0:1 -> #0:0 (vc1 -> libx264) Stream #0:0 -> #0:1 (wmav2 -> libvo_aacenc) Press [q] to stop, [?] for help frame= 53 fps= 49 q=29.0 size= 0kB time=00:00:00.13 bitrate= 2.9kbits/ frame= 63 fps= 40 q=29.0 size= 0kB time=00:00:00.46 bitrate= 0.8kbits/ frame= 74 fps= 35 q=29.0 size= 0kB time=00:00:00.83 bitrate= 0.5kbits/ frame= 85 fps= 32 q=29.0 size= 0kB time=00:00:01.20 bitrate= 0.3kbits/ frame= 95 fps= 30 q=29.0 size= 0kB time=00:00:01.53 bitrate= 0.3kbits/ frame= 107 fps= 28 q=29.0 size= 0kB time=00:00:01.93 bitrate= 0.2kbits/ Queue input is backward in time [mp4 @ 00000000003ef800] Non-monotonous DTS in output stream 0:1; previous: 7616 , current: 7063; changing to 7617. This may result in incorrect timestamps in th e output file. frame= 118 fps= 28 q=29.0 size= 113kB time=00:00:02.30 bitrate= 402.6kbits/ frame= 129 fps= 26 q=29.0 size= 219kB time=00:00:02.66 bitrate= 670.7kbits/ frame= 141 fps= 26 q=29.0 size= 264kB time=00:00:03.06 bitrate= 704.2kbits/ frame= 152 fps= 25 q=29.0 size= 328kB time=00:00:03.43 bitrate= 782.2kbits/ frame= 163 fps= 25 q=29.0 size= 431kB time=00:00:03.80 bitrate= 928.1kbits/ frame= 174 fps= 24 q=29.0 size= 568kB time=00:00:04.17 bitrate=1116.3kbits/ frame= 190 fps= 25 q=29.0 size= 781kB time=00:00:04.70 bitrate=1359.9kbits/ frame= 204 fps= 25 q=29.0 size= 1006kB time=00:00:05.17 bitrate=1593.1kbits/ frame= 218 fps= 25 q=29.0 size= 1058kB time=00:00:05.63 bitrate=1536.8kbits/ frame= 229 fps= 25 q=29.0 size= 1093kB time=00:00:06.00 bitrate=1490.9kbits/ frame= 239 fps= 24 q=29.0 size= 1118kB time=00:00:06.33 bitrate=1444.4kbits/ frame= 251 fps= 24 q=29.0 size= 1150kB time=00:00:06.74 bitrate=1397.9kbits/ frame= 265 fps= 24 q=29.0 size= 1234kB time=00:00:07.20 bitrate=1402.3kbits/ frame= 278 fps= 25 q=29.0 size= 1332kB time=00:00:07.64 bitrate=1428.3kbits/ frame= 294 fps= 25 q=29.0 size= 1403kB time=00:00:08.17 bitrate=1405.7kbits/ frame= 308 fps= 25 q=29.0 size= 1547kB time=00:00:08.64 bitrate=1466.4kbits/ frame= 323 fps= 25 q=29.0 size= 1595kB time=00:00:09.14 bitrate=1429.5kbits/ frame= 337 fps= 25 q=29.0 size= 1702kB time=00:00:09.60 bitrate=1450.7kbits/ frame= 351 fps= 25 q=29.0 size= 1755kB time=00:00:10.07 bitrate=1427.1kbits/ frame= 365 fps= 25 q=29.0 size= 1820kB time=00:00:10.54 bitrate=1414.1kbits/ frame= 381 fps= 25 q=29.0 size= 1852kB time=00:00:11.07 bitrate=1369.6kbits/ frame= 396 fps= 26 q=29.0 size= 1893kB time=00:00:11.57 bitrate=1339.5kbits/ frame= 409 fps= 26 q=29.0 size= 1923kB time=00:00:12.01 bitrate=1311.8kbits/ frame= 421 fps= 25 q=29.0 size= 1967kB time=00:00:12.41 bitrate=1298.3kbits/ frame= 434 fps= 25 q=29.0 size= 1998kB time=00:00:12.84 bitrate=1274.0kbits/ frame= 445 fps= 25 q=29.0 size= 2018kB time=00:00:13.21 bitrate=1251.3kbits/ frame= 458 fps= 25 q=29.0 size= 2048kB time=00:00:13.64 bitrate=1229.5kbits/ frame= 471 fps= 25 q=29.0 size= 2067kB time=00:00:14.08 bitrate=1202.3kbits/ frame= 484 fps= 25 q=29.0 size= 2189kB time=00:00:14.51 bitrate=1235.5kbits/ frame= 497 fps= 25 q=29.0 size= 2260kB time=00:00:14.94 bitrate=1238.3kbits/ frame= 509 fps= 25 q=29.0 size= 2311kB time=00:00:15.34 bitrate=1233.3kbits/ frame= 523 fps= 25 q=29.0 size= 2429kB time=00:00:15.81 bitrate=1258.1kbits/ frame= 535 fps= 25 q=29.0 size= 2541kB time=00:00:16.21 bitrate=1283.5kbits/ frame= 548 fps= 25 q=29.0 size= 2718kB time=00:00:16.64 bitrate=1337.5kbits/ frame= 560 fps= 25 q=29.0 size= 2845kB time=00:00:17.05 bitrate=1367.1kbits/ frame= 571 fps= 25 q=29.0 size= 2965kB time=00:00:17.41 bitrate=1394.6kbits/ frame= 580 fps= 25 q=29.0 size= 3025kB time=00:00:17.71 bitrate=1398.7kbits/ frame= 588 fps= 25 q=29.0 size= 3098kB time=00:00:17.98 bitrate=1411.1kbits/ frame= 597 fps= 25 q=29.0 size= 3183kB time=00:00:18.28 bitrate=1426.1kbits/ frame= 606 fps= 24 q=29.0 size= 3279kB time=00:00:18.58 bitrate=1445.2kbits/ frame= 616 fps= 24 q=29.0 size= 3441kB time=00:00:18.91 bitrate=1489.9kbits/ frame= 626 fps= 24 q=29.0 size= 3650kB time=00:00:19.25 bitrate=1553.0kbits/ frame= 638 fps= 24 q=29.0 size= 3826kB time=00:00:19.65 bitrate=1594.7kbits/ frame= 649 fps= 24 q=29.0 size= 3950kB time=00:00:20.02 bitrate=1616.3kbits/ frame= 660 fps= 24 q=29.0 size= 4067kB time=00:00:20.38 bitrate=1634.1kbits/ frame= 669 fps= 24 q=29.0 size= 4121kB time=00:00:20.68 bitrate=1631.8kbits/ frame= 682 fps= 24 q=29.0 size= 4274kB time=00:00:21.12 bitrate=1657.9kbits/ frame= 696 fps= 24 q=29.0 size= 4446kB time=00:00:21.58 bitrate=1687.1kbits/ frame= 709 fps= 24 q=29.0 size= 4590kB time=00:00:22.02 bitrate=1707.3kbits/ frame= 719 fps= 24 q=29.0 size= 4772kB time=00:00:22.35 bitrate=1748.5kbits/ frame= 732 fps= 24 q=29.0 size= 4852kB time=00:00:22.78 bitrate=1744.3kbits/ frame= 744 fps= 24 q=29.0 size= 4973kB time=00:00:23.18 bitrate=1756.9kbits/ frame= 756 fps= 24 q=29.0 size= 5099kB time=00:00:23.59 bitrate=1770.8kbits/ frame= 768 fps= 24 q=29.0 size= 5149kB time=00:00:23.99 bitrate=1758.4kbits/ frame= 780 fps= 24 q=29.0 size= 5227kB time=00:00:24.39 bitrate=1755.7kbits/ frame= 797 fps= 24 q=29.0 size= 5377kB time=00:00:24.95 bitrate=1765.0kbits/ frame= 813 fps= 24 q=29.0 size= 5507kB time=00:00:25.49 bitrate=1769.5kbits/ frame= 828 fps= 24 q=29.0 size= 5634kB time=00:00:25.99 bitrate=1775.5kbits/ frame= 843 fps= 24 q=29.0 size= 5701kB time=00:00:26.49 bitrate=1762.9kbits/ frame= 859 fps= 24 q=29.0 size= 5830kB time=00:00:27.02 bitrate=1767.0kbits/ frame= 872 fps= 24 q=29.0 size= 5926kB time=00:00:27.46 bitrate=1767.7kbits/ frame= 888 fps= 24 q=29.0 size= 6014kB time=00:00:27.99 bitrate=1759.7kbits/ frame= 900 fps= 24 q=29.0 size= 6332kB time=00:00:28.39 bitrate=1826.9kbits/ frame= 901 fps= 24 q=-1.0 Lsize= 6717kB time=00:00:30.10 bitrate=1828.0kbits /s video:6211kB audio:472kB subtitle:0 global headers:0kB muxing overhead 0.513217% [libx264 @ 00000000002e6980] frame I:8 Avg QP:21.77 size: 39744 [libx264 @ 00000000002e6980] frame P:433 Avg QP:25.69 size: 11490 [libx264 @ 00000000002e6980] frame B:460 Avg QP:29.25 size: 2319 [libx264 @ 00000000002e6980] consecutive B-frames: 5.4% 78.6% 2.7% 13.3% [libx264 @ 00000000002e6980] mb I I16..4: 21.8% 48.8% 29.5% [libx264 @ 00000000002e6980] mb P I16..4: 0.7% 4.0% 1.3% P16..4: 37.1% 22.2 % 15.5% 0.0% 0.0% skip:19.2% [libx264 @ 00000000002e6980] mb B I16..4: 0.1% 0.5% 0.2% B16..8: 43.5% 7.0 % 2.1% direct: 2.2% skip:44.5% L0:36.4% L1:52.7% BI:10.9% [libx264 @ 00000000002e6980] 8x8 transform intra:62.8% inter:56.2% [libx264 @ 00000000002e6980] coded y,uvDC,uvAC intra: 74.2% 78.8% 44.0% inter: 2 3.6% 14.5% 1.0% [libx264 @ 00000000002e6980] i16 v,h,dc,p: 48% 24% 9% 20% [libx264 @ 00000000002e6980] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 16% 17% 15% 7% 8% 11% 8% 10% 8% [libx264 @ 00000000002e6980] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 19% 17% 15% 7% 10% 11% 8% 7% 7% [libx264 @ 00000000002e6980] i8c dc,h,v,p: 53% 21% 18% 7% [libx264 @ 00000000002e6980] Weighted P-Frames: Y:0.7% UV:0.0% [libx264 @ 00000000002e6980] ref P L0: 62.4% 19.0% 12.0% 6.6% 0.0% [libx264 @ 00000000002e6980] ref B L0: 90.5% 8.9% 0.7% [libx264 @ 00000000002e6980] ref B L1: 97.9% 2.1% [libx264 @ 00000000002e6980] kb/s:1692.37 AND THE –MOVFLAGS COMMAND: C:\XSITE\SITE>ffmpeg_new -i C:\vidtests\Wildlife.mp4 -movflags faststart C:\vidtests\Wildlife_fs.mp4 AND THE –MOVFLAGS OUTPUT ffmpeg version N-54207-ge59fb3f Copyright (c) 2000-2013 the FFmpeg developers built on Jun 25 2013 21:55:00 with gcc 4.7.3 (GCC) configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-av isynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enab le-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetyp e --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --ena ble-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-l ibopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libsp eex --enable-libtheora --enable-libtwolame --enable-libvo-aacenc --enable-libvo- amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs -- enable-libxvid --enable-zlib libavutil 52. 37.101 / 52. 37.101 libavcodec 55. 17.100 / 55. 17.100 libavformat 55. 10.100 / 55. 10.100 libavdevice 55. 2.100 / 55. 2.100 libavfilter 3. 77.101 / 3. 77.101 libswscale 2. 3.100 / 2. 3.100 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 3.100 / 52. 3.100 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'C:\vidtests\Wildlife.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 title : Wildlife in HD encoder : Lavf55.10.100 comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball copyright : -¬ 2008 Microsoft Corporation Duration: 00:00:30.13, start: 0.036281, bitrate: 1826 kb/s Stream #0:0(eng): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 640x480, 1692 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc Metadata: handler_name : VideoHandler Stream #0:1(eng): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 12 8 kb/s Metadata: handler_name : SoundHandler [libx264 @ 0000000004360620] using cpu capabilities: MMX2 SSE2Fast SSSE3 Cache64 [libx264 @ 0000000004360620] profile High, level 3.0 [libx264 @ 0000000004360620] 264 - core 133 r2334 a3ac64b - H.264/MPEG-4 AVC cod ec - Copyleft 2003-2013 - http://www.videolan.org/x264.html - options: cabac=1 r ef=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed _ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pski p=1 chroma_qp_offset=-2 threads=3 lookahead_threads=1 sliced_threads=0 nr=0 deci mate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_ adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=2 5 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.6 0 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'C:\vidtests\Wildlife_fs.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 title : Wildlife in HD copyright : -¬ 2008 Microsoft Corporation comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball encoder : Lavf55.10.100 Stream #0:0(eng): Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 6 40x480, q=-1--1, 30k tbn, 29.97 tbc Metadata: handler_name : VideoHandler Stream #0:1(eng): Audio: aac (libvo_aacenc) ([64][0][0][0] / 0x0040), 44100 Hz, stereo, s16, 128 kb/s Metadata: handler_name : SoundHandler Stream mapping: Stream #0:0 -> #0:0 (h264 -> libx264) Stream #0:1 -> #0:1 (aac -> libvo_aacenc) Press [q] to stop, [?] for help frame= 52 fps=0.0 q=29.0 size= 29kB time=00:00:01.76 bitrate= 133.9kbits/ frame= 63 fps= 60 q=29.0 size= 104kB time=00:00:02.14 bitrate= 397.2kbits/ frame= 74 fps= 47 q=29.0 size= 176kB time=00:00:02.51 bitrate= 573.2kbits/ frame= 87 fps= 41 q=29.0 size= 265kB time=00:00:02.93 bitrate= 741.2kbits/ frame= 101 fps= 37 q=29.0 size= 358kB time=00:00:03.39 bitrate= 862.8kbits/ frame= 113 fps= 34 q=29.0 size= 437kB time=00:00:03.79 bitrate= 943.7kbits/ frame= 125 fps= 33 q=29.0 size= 520kB time=00:00:04.20 bitrate=1012.2kbits/ frame= 138 fps= 32 q=29.0 size= 606kB time=00:00:04.64 bitrate=1069.8kbits/ frame= 151 fps= 31 q=29.0 size= 696kB time=00:00:05.06 bitrate=1124.3kbits/ frame= 163 fps= 30 q=29.0 size= 780kB time=00:00:05.47 bitrate=1166.4kbits/ frame= 176 fps= 30 q=29.0 size= 919kB time=00:00:05.90 bitrate=1273.9kbits/ frame= 196 fps= 31 q=29.0 size= 994kB time=00:00:06.57 bitrate=1237.4kbits/ frame= 213 fps= 31 q=29.0 size= 1097kB time=00:00:07.13 bitrate=1258.8kbits/ frame= 225 fps= 30 q=29.0 size= 1204kB time=00:00:07.53 bitrate=1309.8kbits/ frame= 236 fps= 30 q=29.0 size= 1323kB time=00:00:07.91 bitrate=1369.4kbits/ frame= 249 fps= 29 q=29.0 size= 1451kB time=00:00:08.34 bitrate=1424.6kbits/ frame= 263 fps= 29 q=29.0 size= 1574kB time=00:00:08.82 bitrate=1461.3kbits/ frame= 278 fps= 29 q=29.0 size= 1610kB time=00:00:09.30 bitrate=1416.9kbits/ frame= 296 fps= 30 q=29.0 size= 1655kB time=00:00:09.91 bitrate=1368.0kbits/ frame= 313 fps= 30 q=29.0 size= 1697kB time=00:00:10.48 bitrate=1326.4kbits/ frame= 330 fps= 30 q=29.0 size= 1737kB time=00:00:11.05 bitrate=1286.5kbits/ frame= 345 fps= 30 q=29.0 size= 1776kB time=00:00:11.54 bitrate=1260.4kbits/ frame= 361 fps= 30 q=29.0 size= 1813kB time=00:00:12.07 bitrate=1230.3kbits/ frame= 377 fps= 30 q=29.0 size= 1847kB time=00:00:12.59 bitrate=1201.4kbits/ frame= 395 fps= 30 q=29.0 size= 1880kB time=00:00:13.22 bitrate=1165.0kbits/ frame= 410 fps= 30 q=29.0 size= 1993kB time=00:00:13.72 bitrate=1190.2kbits/ frame= 424 fps= 30 q=29.0 size= 2080kB time=00:00:14.18 bitrate=1201.4kbits/ frame= 439 fps= 30 q=29.0 size= 2166kB time=00:00:14.67 bitrate=1209.4kbits/ frame= 455 fps= 30 q=29.0 size= 2262kB time=00:00:15.21 bitrate=1217.5kbits/ frame= 469 fps= 30 q=29.0 size= 2341kB time=00:00:15.68 bitrate=1223.0kbits/ frame= 484 fps= 30 q=29.0 size= 2430kB time=00:00:16.19 bitrate=1229.1kbits/ frame= 500 fps= 30 q=29.0 size= 2523kB time=00:00:16.71 bitrate=1236.3kbits/ frame= 515 fps= 30 q=29.0 size= 2607kB time=00:00:17.21 bitrate=1240.4kbits/ frame= 531 fps= 30 q=29.0 size= 2681kB time=00:00:17.73 bitrate=1238.2kbits/ frame= 546 fps= 30 q=29.0 size= 2758kB time=00:00:18.24 bitrate=1238.2kbits/ frame= 561 fps= 30 q=29.0 size= 2824kB time=00:00:18.75 bitrate=1233.4kbits/ frame= 576 fps= 30 q=29.0 size= 2955kB time=00:00:19.25 bitrate=1256.8kbits/ frame= 586 fps= 29 q=29.0 size= 3061kB time=00:00:19.59 bitrate=1279.6kbits/ frame= 598 fps= 29 q=29.0 size= 3217kB time=00:00:19.99 bitrate=1318.4kbits/ frame= 610 fps= 29 q=29.0 size= 3354kB time=00:00:20.39 bitrate=1347.2kbits/ frame= 622 fps= 29 q=29.0 size= 3483kB time=00:00:20.78 bitrate=1372.6kbits/ frame= 634 fps= 29 q=29.0 size= 3593kB time=00:00:21.19 bitrate=1388.6kbits/ frame= 648 fps= 29 q=29.0 size= 3708kB time=00:00:21.66 bitrate=1402.3kbits/ frame= 661 fps= 29 q=29.0 size= 3811kB time=00:00:22.08 bitrate=1413.5kbits/ frame= 674 fps= 29 q=29.0 size= 3978kB time=00:00:22.53 bitrate=1446.3kbits/ frame= 690 fps= 29 q=29.0 size= 4133kB time=00:00:23.05 bitrate=1468.4kbits/ frame= 706 fps= 29 q=29.0 size= 4263kB time=00:00:23.58 bitrate=1480.4kbits/ frame= 721 fps= 29 q=29.0 size= 4391kB time=00:00:24.08 bitrate=1493.8kbits/ frame= 735 fps= 29 q=29.0 size= 4524kB time=00:00:24.55 bitrate=1509.4kbits/ frame= 748 fps= 29 q=29.0 size= 4661kB time=00:00:24.98 bitrate=1528.2kbits/ frame= 763 fps= 29 q=29.0 size= 4835kB time=00:00:25.50 bitrate=1553.1kbits/ frame= 778 fps= 29 q=29.0 size= 4993kB time=00:00:25.99 bitrate=1573.6kbits/ frame= 795 fps= 29 q=29.0 size= 5149kB time=00:00:26.56 bitrate=1588.1kbits/ frame= 814 fps= 29 q=29.0 size= 5258kB time=00:00:27.18 bitrate=1584.4kbits/ frame= 833 fps= 29 q=29.0 size= 5368kB time=00:00:27.82 bitrate=1580.2kbits/ frame= 851 fps= 29 q=29.0 size= 5469kB time=00:00:28.43 bitrate=1575.9kbits/ frame= 870 fps= 29 q=29.0 size= 5567kB time=00:00:29.05 bitrate=1569.5kbits/ frame= 889 fps= 29 q=29.0 size= 5688kB time=00:00:29.70 bitrate=1568.4kbits/ Starting second pass: moving header on top of the file frame= 902 fps= 28 q=-1.0 Lsize= 6109kB time=00:00:30.14 bitrate=1659.8kbits /s dup=1 drop=0 video:5602kB audio:472kB subtitle:0 global headers:0kB muxing overhead 0.566600% [libx264 @ 0000000004360620] frame I:8 Avg QP:20.52 size: 39667 [libx264 @ 0000000004360620] frame P:419 Avg QP:25.06 size: 10524 [libx264 @ 0000000004360620] frame B:475 Avg QP:29.03 size: 2123 [libx264 @ 0000000004360620] consecutive B-frames: 3.2% 79.6% 0.3% 16.9% [libx264 @ 0000000004360620] mb I I16..4: 20.7% 52.3% 26.9% [libx264 @ 0000000004360620] mb P I16..4: 0.7% 4.2% 1.1% P16..4: 39.4% 21.4 % 13.8% 0.0% 0.0% skip:19.3% [libx264 @ 0000000004360620] mb B I16..4: 0.1% 0.9% 0.3% B16..8: 41.8% 6.4 % 1.7% direct: 1.7% skip:47.1% L0:36.4% L1:53.3% BI:10.3% [libx264 @ 0000000004360620] 8x8 transform intra:65.7% inter:58.8% [libx264 @ 0000000004360620] coded y,uvDC,uvAC intra: 71.2% 76.6% 35.7% inter: 2 0.7% 13.0% 0.5% [libx264 @ 0000000004360620] i16 v,h,dc,p: 48% 24% 8% 20% [libx264 @ 0000000004360620] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 17% 18% 15% 6% 8% 11% 8% 10% 8% [libx264 @ 0000000004360620] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 19% 16% 15% 7% 10% 11% 8% 8% 7% [libx264 @ 0000000004360620] i8c dc,h,v,p: 51% 22% 19% 9% [libx264 @ 0000000004360620] Weighted P-Frames: Y:0.7% UV:0.0% [libx264 @ 0000000004360620] ref P L0: 63.4% 19.7% 11.0% 5.9% 0.0% [libx264 @ 0000000004360620] ref B L0: 90.7% 8.7% 0.7% [libx264 @ 0000000004360620] ref B L1: 98.4% 1.6% [libx264 @ 0000000004360620] kb/s:1524.54

  Read the article

• Problem in linking an nasm code

  - by Stefano

  I'm using a computer with an Intel Core 2 CPU and 2GB of RAM. The SO is Ubuntu 9.04. When I try to compile this code: ;programma per la simulazione di un terminale su PC, ottenuto utilizzando l'8250 ;in condizione di loopback , cioè Tx=Rx section .code64 section .data TXDATA EQU 03F8H ;TRASMETTITORE RXDATA EQU 03F8H ;RICEVITORE BAUDLSB EQU 03F8H ;DIVISORE DI BAUD RATE IN LSB BAUDMSB EQU 03F9H ;DIVISORE DI BAUD RATE IN MSB INTENABLE EQU 03F9H ;REGISTRO DI ABILITAZIONE DELL'INTERRUZIONE INTIDENTIF EQU 03FAH ;REGISTRO DI IDENTIFICAZIONE DELL'INTERRUZIONE LINECTRL EQU 03FBH ;REGISTRO DI CONTROLLO DELLA LINEA MODEMCTRL EQU 03FCH ;REGISTRO DI CONTROLLO DEL MODEM LINESTATUS EQU 03FDH ;REGISTRO DI STATO DELLA LINEA MODEMSTATUS EQU 03FEH ;REGISTRO DI STATO DEL MODEM BAUDRATEDIV DW 0060H ;DIVISOR: LOW=60, HIGH=00 -BAUD =9600 COUNTERCHAR DB 0 ;CHARACTER COUNTER ;DW 256 DUP (?) section .text global _start _start: ;PROGRAMMAZIONE 8250 MOV DX,LINECTRL MOV AL,80H ;BIT 7=1 PER INDIRIZZARE IL BAUD RATE OUT DX,AL MOV DX,BAUDLSB MOV AX,BAUDRATEDIV ;DEFINISCO FATTORE DI DIVISIONE OUT DX,AL MOV DX,BAUDMSB MOV AL,AH OUT DX,AL ;MSB MOV DX,LINECTRL MOV AL,00000011B ;8 BIT DATO, 1 STOP, PARITA' NO OUT DX,AL MOV DX,MODEMCTRL MOV AL,00010011B ;BIT 4=0 PER NO LOOPBACK OUT DX,AL MOV DX,INTENABLE XOR AL,AL ;DISABILITO TUTTI GLI INTERRUPTS OUT DX,AL CICLO: MOV DX,LINESTATUS IN AL,DX ;LEGGO IL REGISTRO DI STATO DELLA LINEA TEST AL,00011110B ;VERIFICO GLI ERRORI (4 TIPI) JNE ERRORI TEST AL,01H ;VERIFICO Rx PRONTO JNE LEGGOCHAR TEST AL,20H ;VERIFICO Tx VUOTO JE CICLO ;SE SI ARRIVA A QUESTO PUNTO ALLORA L'8250 è PRONTO PER TRASMETTERE UN NUOVO CARATTERE MOV AH,1 INT 80H JE CICLO ;SE SI ARRIVA A QUESTO PUNTO SIGNIFICA CHE ESISTE UN CARATTERE DA TASTIERA MOV AH,0 INT 80H ;Al CONTIENE IL CARATTERE DELLA TASTIERA MOV DX,3F8H OUT DX,AL JMP CICLO LEGGOCHAR: MOV AL,[COUNTERCHAR] INC AL CMP AL,15 JE FINE MOV [COUNTERCHAR],AL MOV DX,TXDATA IN AL,DX ;AL CONTIENE IL CARATTERE RICEVUTO AND AL,7FH ;POICHè VI SONO 7 BIT DI DATO ;VISUALIZZAZIONE DEL CARATTERE MOV BX,0 MOV AH,14 INT 80H POP AX CMP AL,0DH ;CONTROLLO SE RETURN JNE CICLO ;CAMBIO RIGA DI VISUALIZZAZIONE MOV AL,0AH MOV BX,0 MOV AH,14 ;INT 10H INT 80H JMP CICLO ;GESTIONE ERRORI ERRORI: MOV DX,3F8H IN AL,DX MOV AL,'?' MOV BX,0 MOV AH,14 INT 80H JMP CICLO FINE: XOR AH,AH MOV AL,03 INT 80H When I compile this code "NASM -f bin UARTLOOP.asm", the compiler can create the UARTLOOP.o file without any error. When I try to link the .o file with "ld UARTLOOP.o" it tells: UARTLOOP.o: In function `_start': UARTLOOP.asm:(.text+0xd): relocation truncated to fit: R_X86_64_16 against `.data' Have u got some ideas to solve this problem? Thx =)

  Read the article

• Python performance: iteration and operations on nested lists

  - by J.J.

  Problem Hey folks. I'm looking for some advice on python performance. Some background on my problem: Given: A mesh of nodes of size (x,y) each with a value (0...255) starting at 0 A list of N input coordinates each at a specified location within the range (0...x, 0...y) Increment the value of the node at the input coordinate and the node's neighbors within range Z up to a maximum of 255. Neighbors beyond the mesh edge are ignored. (No wrapping) BASE CASE: A mesh of size 1024x1024 nodes, with 400 input coordinates and a range Z of 75 nodes. Processing should be O(x*y*Z*N). I expect x, y and Z to remain roughly around the values in the base case, but the number of input coordinates N could increase up to 100,000. My goal is to minimize processing time. Current results I have 2 current implementations: f1, f2 Running speed on my 2.26 GHz Intel Core 2 Duo with Python 2.6.1: f1: 2.9s f2: 1.8s f1 is the initial naive implementation: three nested for loops. f2 is replaces the inner for loop with a list comprehension. Code is included below for your perusal. Question How can I further reduce the processing time? I'd prefer sub-1.0s for the test parameters. Please, keep the recommendations to native Python. I know I can move to a third-party package such as numpy, but I'm trying to avoid any third party packages. Also, I've generated random input coordinates, and simplified the definition of the node value updates to keep our discussion simple. The specifics have to change slightly and are outside the scope of my question. thanks much! f1 is the initial naive implementation: three nested for loops. 2.9s def f1(x,y,n,z): rows = [] for i in range(x): rows.append([0 for i in xrange(y)]) for i in range(n): inputX, inputY = (int(x*random.random()), int(y*random.random())) topleft = (inputX - z, inputY - z) for i in xrange(max(0, topleft[0]), min(topleft[0]+(z*2), x)): for j in xrange(max(0, topleft[1]), min(topleft[1]+(z*2), y)): if rows[i][j] <= 255: rows[i][j] += 1 f2 is replaces the inner for loop with a list comprehension. 1.8s def f2(x,y,n,z): rows = [] for i in range(x): rows.append([0 for i in xrange(y)]) for i in range(n): inputX, inputY = (int(x*random.random()), int(y*random.random())) topleft = (inputX - z, inputY - z) for i in xrange(max(0, topleft[0]), min(topleft[0]+(z*2), x)): l = max(0, topleft[1]) r = min(topleft[1]+(z*2), y) rows[i][l:r] = [j+1 for j in rows[i][l:r] if j < 255]

  Read the article

• SQLiteOpenHelper.getWriteableDatabase() null pointer exception on Android

  - by Drew Dara-Abrams

  I've had fine luck using SQLite with straight, direct SQL in Android, but this is the first time I'm wrapping a DB in a ContentProvider. I keep getting a null pointer exception when calling getWritableDatabase() or getReadableDatabase(). Is this just a stupid mistake I've made with initializations in my code or is there a bigger issue? public class DatabaseProvider extends ContentProvider { ... private DatabaseHelper databaseHelper; private SQLiteDatabase db; ... @Override public boolean onCreate() { databaseHelper = new DatabaseProvider.DatabaseHelper(getContext()); return (databaseHelper == null) ? false : true; } ... @Override public Uri insert(Uri uri, ContentValues values) { db = databaseHelper.getWritableDatabase(); // NULL POINTER EXCEPTION HERE ... } private static class DatabaseHelper extends SQLiteOpenHelper { public static final String DATABASE_NAME = "cogsurv.db"; public static final int DATABASE_VERSION = 1; public static final String[] TABLES = { "people", "travel_logs", "travel_fixes", "landmarks", "landmark_visits", "direction_distance_estimates" }; // people._id does not AUTOINCREMENT, because it's set based on server's people.id public static final String[] CREATE_TABLE_SQL = { "CREATE TABLE people (_id INTEGER PRIMARY KEY," + "server_id INTEGER," + "name VARCHAR(255)," + "email_address VARCHAR(255))", "CREATE TABLE travel_logs (_id INTEGER PRIMARY KEY AUTOINCREMENT," + "server_id INTEGER," + "person_local_id INTEGER," + "person_server_id INTEGER," + "start DATE," + "stop DATE," + "type VARCHAR(15)," + "uploaded VARCHAR(1))", "CREATE TABLE travel_fixes (_id INTEGER PRIMARY KEY AUTOINCREMENT," + "datetime DATE, " + "latitude DOUBLE, " + "longitude DOUBLE, " + "altitude DOUBLE," + "speed DOUBLE," + "accuracy DOUBLE," + "travel_mode VARCHAR(50), " + "person_local_id INTEGER," + "person_server_id INTEGER," + "travel_log_local_id INTEGER," + "travel_log_server_id INTEGER," + "uploaded VARCHAR(1))", "CREATE TABLE landmarks (_id INTEGER PRIMARY KEY AUTOINCREMENT," + "server_id INTEGER," + "name VARCHAR(150)," + "latitude DOUBLE," + "longitude DOUBLE," + "person_local_id INTEGER," + "person_server_id INTEGER," + "uploaded VARCHAR(1))", "CREATE TABLE landmark_visits (_id INTEGER PRIMARY KEY AUTOINCREMENT," + "server_id INTEGER," + "person_local_id INTEGER," + "person_server_id INTEGER," + "landmark_local_id INTEGER," + "landmark_server_id INTEGER," + "travel_log_local_id INTEGER," + "travel_log_server_id INTEGER," + "datetime DATE," + "number_of_questions_asked INTEGER," + "uploaded VARCHAR(1))", "CREATE TABLE direction_distance_estimates (_id INTEGER PRIMARY KEY AUTOINCREMENT," + "server_id INTEGER," + "person_local_id INTEGER," + "person_server_id INTEGER," + "travel_log_local_id INTEGER," + "travel_log_server_id INTEGER," + "landmark_visit_local_id INTEGER," + "landmark_visit_server_id INTEGER," + "start_landmark_local_id INTEGER," + "start_landmark_server_id INTEGER," + "target_landmark_local_id INTEGER," + "target_landmark_server_id INTEGER," + "datetime DATE," + "direction_estimate DOUBLE," + "distance_estimate DOUBLE," + "uploaded VARCHAR(1))" }; public DatabaseHelper(Context context) { super(context, DATABASE_NAME, null, DATABASE_VERSION); Log.v(Constants.TAG, "DatabaseHelper()"); } @Override public void onCreate(SQLiteDatabase db) { Log.v(Constants.TAG, "DatabaseHelper.onCreate() starting"); // create the tables int length = CREATE_TABLE_SQL.length; for (int i = 0; i < length; i++) { db.execSQL(CREATE_TABLE_SQL[i]); } Log.v(Constants.TAG, "DatabaseHelper.onCreate() finished"); } @Override public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) { for (String tableName : TABLES) { db.execSQL("DROP TABLE IF EXISTS" + tableName); } onCreate(db); } } } As always, thanks for the assistance! -- Not sure if this detail helps, but here's LogCat showing the exception:

  Read the article

• Entrepreneur Needs Programmers, Architects, or Engineers?

  - by brand-newbie

  Hi guys (Ladies included). I posted on a related site, but THIS is the place to be. I want to build a specialized website. I am an entrepreneur and refining valuations now for venture capitalsists: i.e., determining how much cash I will need. I need help in understanding what human resources I need (i.e., Software Programmers, Architects, Engineers, etc.)??? Trust me, I have read most--if not all--of the threads here on the subject, and I can tell you I am no closer to the answer than ever. Here's my technology problem: The website will include (2) main components: a search engine (web crawler)...and a very large database. The search engine will not be a competitor to google, obviously; however, it "will" require bots to scour the web. The website will be, basically, a statistical database....where users should be able to pull up any statistic from "numerous" fields. Like any entrepreneur with a web-based vision, I'm "hoping" to get 100+ million registered users eventually. However, practically, we will start as small as feasible. As regards the technology (database architecture, servers, etc.), I do want quality, quality, quality. My priorities are speed, and the capaility to be scalable...so that if I "did" get globally large, we could do it without having to re-engineer anything. In other words, I want the back-end and the "infrastructure" to be scalable and professional....with emphasis on quality. I am not an IT professional. Although I've built several Joomla-based websites, I'm just a rookie who's only used minor javascript coding to modify a few plug-ins and components. The business I'm trying to create requires specialization and experts. I want to define the problem and let a capable team create the final product, and I will stay totally hands off. So who do you guys suggest I hire to run this thing? A software engineer? I was thinking I would need a "database engineer," a "systems security engineer", and maybe 2 or 3 "programmers" for the search engine. Also a web designer...and maybe a part-time graphic designer...everyone working under a single software engineer. What do you guys think? Who should I hire?...I REALLY need help from some people in the industry (YOU guys) on this. Is this project do-able in 6 months? If so, how many people will I need? Who exactly needs to head up this thing?...Senior software engineer, an embedded engineer, a CC++ engineer, a java engineer, a database engineer? And do I build this thing is Ruby or Java?

  Read the article

• TVirtualStringTree - resetting non-visual nodes and memory consumption

  - by Remy Lebeau - TeamB

  I have an app that loads records from a binary log file and displays them in a virtual TListView. There are potentially millions of records in a file, and the display can be filtered by the user, so I do not load all of the records in memory at one time, and the ListView item indexes are not a 1-to-1 relation with the file record offsets (List item 1 may be file record 100, for instance). I use the ListView's OnDataHint event to load records for just the items the ListView is actually interested in. As the user scrolls around, the range specified by OnDataHint changes, allowing me to free records that are not in the new range, and allocate new records as needed. This works fine, speed is tolerable, and the memory footprint is very low. I am currently evaluating TVirtualStringTree as a replacement for the TListView, mainly because I want to add the ability to expand/collapse records that span multiple lines (I can fudge it with the TListView by incrementing/decrementing the item count dynamically, but this is not as straight forward as using a real tree). For the most part, I have been able to port the TListView logic and have everything work as I need. I notice that TVirtualStringTree's virtual paradigm is vastly different, though. It does not have the same kind of OnDataHint functionality that TListView does (I can use the OnScroll event to fake it, which allows my memory buffer logic to continue working), and I can use the OnInitializeNode event to associate nodes with records that are allocated. However, once a tree node is initialized, it sees that it remains initialized for the lifetime of the tree. That is not good for me. As the user scrolls around and I remove records from memory, I need to reset those non-visual nodes without removing them from the tree completely, or losing their expand/collapse states. When the user scrolls them back into view, I can re-allocate the records and re-initialize the nodes. Basically, I want to make TVirtualStringTree act as much like TListView as possible, as far as its virtualization is concerned. I have seen that TVirtualStringTree has a ResetNode() method, but I encounter various errors whenever I try to use it. I must be using it wrong. I also thought of just storing a data pointer inside each node to my record buffers, and I allocate and free memory, update those pointers accordingly. The end effect does not work so well, either. Worse, my largest test log file has ~5 million records in it. If I initialize the TVirtualStringTree with that many nodes at one time (when the log display is unfiltered), the tree's internal overhead for its nodes takes up a whopping 260MB of memory (without any records being allocated yet). Whereas with the TListView, loading the same log file and all the memory logic behind it, I can get away with using just a few MBs. Any ideas?

  Read the article

• ASP.Net Web Farm Monitoring

  - by cisellis

  I am looking for suggestions on doing some simple monitoring of an ASP.Net web farm as close to real-time as possible. The objectives of this question are to: Identify the best way to monitor several Windows Server production boxes during short (minutes long) period of ridiculous load Receive near-real-time feedback on a few key metrics about each box. These are simple metrics available via WMI such as CPU, Memory and Disk Paging. I am defining my time constraints as soon as possible with 120 seconds delayed being the absolute upper limit. Monitor whether any given box is up (with "up" being defined as responding web requests in a reasonable amount of time) Here are more details, things I've tried, etc. I am not interested in logging. We have logging solutions in place. I have looked at solutions such as ELMAH which don't provide much in the way of hardware monitoring and are not visible across an entire web farm. ASP.Net Health Monitoring is too broad, focuses too much on logging and is not acceptable for deep analysis. We are on Amazon Web Services and we have looked into CloudWatch. It looks great but messages in the forum indicate that the metrics are often a few minutes behind, with one thread citing 2 minutes as the absolute soonest you could expect to receive the feedback. This would be good to have for later analysis but does not help us real-time Stuff like JetBrains profiler is good for testing but again, not helpful during real-time monitoring. The closest out-of-box solution I've seen is Nagios which is free and appears to measure key indicators on any kind of box, including Windows. However, it appears to require a Linux box to run itself on and a good deal of manual configuration. I'd prefer to not spend my time mining config files and then be up a creek when it fails in production since Linux is not my main (or even secondary) environment. Are there any out-of-box solutions that I am missing? Obviously a windows-based solution that is easy to setup is ideal. I don't require many bells and whistles. In the absence of an out-of-box solution, it seems easy for me to write something simple to handle what I need. I've been thinking a simple client-server setup where the server requests a few WMI metrics from each client over http and sticks them in a database. We could then monitor the metrics via a query or a dashboard or something. If the client doesn't respond, it's effectively down. Any problems with this, best practices, or other ideas? Thanks for any help/feedback.

  Read the article

• Segmentation fault when creating a Phonon MediaObject

  - by Luke Hansford

  I have music playing program made using PySide which uses Phonon to playback audio. I updated to MacOS X Mavericks a few days ago, which meant I needed to reinstall PySide. I'm not sure which of these actions has caused this, but now whenever I try to create a Phonon MediaObject I get a Segmentation Fault: 11 from Python. It's not just in my program, it happens when trying to create a MediaObject in Python without any other actions. I'm getting the following error message from my Mac whenever it crashes: Process: Python [13711] Path: /usr/local/Cellar/python/2.7.5/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/MacOS/Python Identifier: org.python.python Version: 2.7.5 (2.7.5) Code Type: X86-64 (Native) Parent Process: bash [13707] Responsible: Terminal [13704] User ID: 501 Date/Time: 2013-11-01 19:47:53.164 +1000 OS Version: Mac OS X 10.9 (13A603) Report Version: 11 Anonymous UUID: C2686854-18CA-9D37-26E9-60050E3C4DA6 Sleep/Wake UUID: BB983BF6-CCE2-44D1-82A0-1C73382DFFE4 Crashed Thread: 0 Dispatch queue: com.apple.main-thread Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000008 VM Regions Near 0x8: --> __TEXT 00000001082e8000-00000001082e9000 [ 4K] r-x/rwx SM=COW /usr/local/Cellar/python/2.7.5/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/MacOS/Python Thread 0 Crashed:: Dispatch queue: com.apple.main-thread 0 QtCore 0x000000010a1b34cb QObject::moveToThread(QThread*) + 17 1 QtDBus 0x000000010d55f98b QDBusDefaultConnection::QDBusDefaultConnection(QDBusConnection::BusType, char const*) + 171 2 QtDBus 0x000000010d55ebdf QDBusConnection::sessionBus() + 71 3 phonon 0x000000010d50228d Phonon::FactoryPrivate::FactoryPrivate() + 189 4 phonon 0x000000010d5024d5 Phonon::$_249::operator->() + 99 5 phonon 0x000000010d502991 Phonon::Factory::registerFrontendObject(Phonon::MediaNodePrivate*) + 17 6 phonon 0x000000010d50b27e Phonon::MediaNodePrivate::MediaNodePrivate(Phonon::MediaNodePrivate::CastId) + 80 7 phonon 0x000000010d50f570 Phonon::MediaObjectPrivate::MediaObjectPrivate() + 24 8 phonon 0x000000010d50be9d Phonon::MediaObject::MediaObject(QObject*) + 45 9 phonon.so 0x000000010d42f24a Sbk_Phonon_MediaObject_Init + 458 10 org.python.python 0x0000000108338707 type_call + 189 11 org.python.python 0x00000001082f74fd PyObject_Call + 101 12 org.python.python 0x00000001083714f0 PyEval_EvalFrameEx + 15525 13 org.python.python 0x0000000108373aaf fast_function + 182 14 org.python.python 0x0000000108370919 PyEval_EvalFrameEx + 12494 15 org.python.python 0x000000010836d721 PyEval_EvalCodeEx + 1638 16 org.python.python 0x000000010836d0b5 PyEval_EvalCode + 54 17 org.python.python 0x000000010838beb8 run_mod + 53 18 org.python.python 0x000000010838bf5f PyRun_FileExFlags + 137 19 org.python.python 0x000000010838baad PyRun_SimpleFileExFlags + 718 20 org.python.python 0x000000010839c58b Py_Main + 3039 21 libdyld.dylib 0x00007fff8e4fb5fd start + 1 Thread 1:: Dispatch queue: com.apple.libdispatch-manager 0 libsystem_kernel.dylib 0x00007fff8c938662 kevent64 + 10 1 libdispatch.dylib 0x00007fff923e743d _dispatch_mgr_invoke + 239 2 libdispatch.dylib 0x00007fff923e7152 _dispatch_mgr_thread + 52 Thread 2: 0 libsystem_kernel.dylib 0x00007fff8c937e6a __workq_kernreturn + 10 1 libsystem_pthread.dylib 0x00007fff90bd8f08 _pthread_wqthread + 330 2 libsystem_pthread.dylib 0x00007fff90bdbfb9 start_wqthread + 13 Thread 3: 0 libsystem_kernel.dylib 0x00007fff8c937e6a __workq_kernreturn + 10 1 libsystem_pthread.dylib 0x00007fff90bd8f08 _pthread_wqthread + 330 2 libsystem_pthread.dylib 0x00007fff90bdbfb9 start_wqthread + 13 Thread 4: 0 libsystem_kernel.dylib 0x00007fff8c937e6a __workq_kernreturn + 10 1 libsystem_pthread.dylib 0x00007fff90bd8f08 _pthread_wqthread + 330 2 libsystem_pthread.dylib 0x00007fff90bdbfb9 start_wqthread + 13 Thread 0 crashed with X86 Thread State (64-bit): rax: 0x00007feba0d19700 rbx: 0x000000010d5b7098 rcx: 0x00000000002f4180 rdx: 0x000000000012c040 rdi: 0x0000000000000000 rsi: 0x00007feba0d19700 rbp: 0x00007fff57917210 rsp: 0x00007fff579171d0 r8: 0x00007feba0fd5d10 r9: 0x00007feba0ff5310 r10: 0x0000000019c04cbe r11: 0x0000000070769b38 r12: 0x00007fff57917220 r13: 0x00007feba0c07190 r14: 0x0000000000000000 r15: 0x00007feba0fe1430 rip: 0x000000010a1b34cb rfl: 0x0000000000010202 cr2: 0x0000000000000008 Logical CPU: 0 Error Code: 0x00000004 Trap Number: 14 Anyone have any ideas about what is happening?

  Read the article

< Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >