Search Results

Search found 11671 results on 467 pages for 'man pages'.

Page 429/467 | < Previous Page | 425 426 427 428 429 430 431 432 433 434 435 436  | Next Page >

• Windows 7 extremely slow login, exchange performance, printer enumeration, etc...

  - by Jeff

  Background: I have a fresh copy of Windows 7 Professional x64 on a Dell Latitude E6500. The laptop has 8GB RAM, 250GB drive, and all Intel peripherals (net/wifi/graphics). All available Windows updates, as well as hardware drivers are installed. The IT folks where I work joined the computer to our Windows 2003-based Active Directory domain. There are no errors in any logs that we've looked at, and Group Policy templates appear to have applied properly. Problem: Every time I turn on or reboot the computer, it takes between 2 to 10 (all times are actual) minutes after successfully typing my username/password to get to my desktop. My login script does not always run. Sometimes I get a black screen, and a couple of minutes later the login script will pop up and take up to 10 minutes to complete. I can get around this by hitting cntrl-shift-esc and running explorer.exe from the Task Manager. The login script continues to hang, but I can minimize it and go on about my business. Either way, it generally throws errors prior to completing. I often get slow or failed connectivity to Exchange via Outlook. When I bring up printer dialogs, they take several minutes to populate, and block the calling app while doing so. Copies to SMB shares are very slow. On my home network, everything works fine. On both the work network and home network, I can use remote internet resources just fine. Web pages pull up, remote VPN's are fine, I can max out bandwidth on SpeakEasy Speed Test. I can get almost max bandwidth transferring FTP/HTTP over a LAN. Another symptom of the problem is that when I first log in, the work network shows as "Identifying" for a long time in the Network and Sharing Center, and will often then change to the name of the work domain, but say "Unauthenticated Network". Note that this computer previously ran Windows Vista with none of these problems. Attempts to Fix: Installed the Win7 admin pack Uninstalled/reinstalled all hardware drivers Verified Active Directory DNS settings (Vista works relatively well on the same network) Reset all TCP/IP settings on all adapters using the netsh commands to do so Disabled ipv6 on all adapters Disable wifi adapter while on work network Locked the network card to 100/Full, 1000/Full; also tried Auto Added various important addresses to hosts file (exchange, dns, ad) -- removed when didn't help My background is a jpeg (sounds unrelated but there is apparently a win7 login bug related to solid color background) More I have forgotten The IT staff at my company indicated they believe this is due to having Windows 2003 AD servers and not having any Windows 2008 R2 AD servers. Other than that, they have no advice or assistance to offer other than a rebuild (already tried that once with similar symptoms), or downgrade to Vista. Any thoughts out there?

  Read the article

• High CPU from httpd process

  - by KHWeb

  I am currently getting high CPU on a server that is just running a couple of sites with very low traffic. One of the sites is in still development going live soon. However, this site is very very slow...When browsing through its pages I can see that the CPU goes from 30% to 100% for httpd (see top output below). I have tuned httpd & MySQL, Apache Solr, Tomcat for high performance, and I am using APC. Not sure what to do from here or how to find the culprit as I have a bunch of messages on the httpd log and have been chasing dead ends for some time...any help is greatly appreciated. Server: AuthenticAMD, Quad-Core AMD Opteron(tm) Processor 2352, RAM 16GB Linux 2.6.27 64-bit, Centos 5.5 Plesk 9.5.4, MySQL 5.1.48, PHP 5.2.17 Apache/2.2.3 (CentOS) DAV/2 mod_jk/1.2.15 mod_ssl/2.2.3 OpenSSL/0.9.8e-fips-rhel5 PHP/5.2.17 mod_perl/2.0.4 Perl/v5.8.8 Tomcat6-6.0.29-1.jpp5, Tomcat-native-1.1.20-1.el5, Apache Solr top 17595 apache 20 0 1825m 507m 10m R 100.4 3.2 0:17.50 httpd 17596 apache 20 0 1565m 247m 9936 R 83.1 1.5 0:10.86 httpd 17598 apache 20 0 1430m 110m 6472 S 54.5 0.7 0:08.66 httpd 17599 apache 20 0 1438m 124m 12m S 37.2 0.8 0:11.20 httpd 16197 mysql 20 0 13.0g 2.0g 5440 S 9.6 12.6 297:12.79 mysqld 17617 root 20 0 12748 1172 812 R 0.7 0.0 0:00.88 top 8169 tomcat 20 0 4613m 268m 6056 S 0.3 1.7 6:40.56 java httpd error_log [debug] prefork.c(991): AcceptMutex: sysvsem (default: sysvsem) [info] mod_fcgid: Process manager 17593 started [debug] proxy_util.c(1854): proxy: grabbed scoreboard slot 0 in child 17594 for worker proxy:reverse [debug] proxy_util.c(1967): proxy: initialized single connection worker 0 in child 17594 for (*) [debug] proxy_util.c(1854): proxy: grabbed scoreboard slot 0 in child 17595 for worker proxy:reverse [debug] proxy_util.c(1873): proxy: worker proxy:reverse already initialized [notice] child pid 22782 exit signal Segmentation fault (11) [error] (43)Identifier removed: apr_global_mutex_lock(jk_log_lock) failed [debug] util_ldap.c(2021): LDAP merging Shared Cache conf: shm=0x7fd29a5478c0 rmm=0x7fd29a547918 for VHOST: example.com [info] APR LDAP: Built with OpenLDAP LDAP SDK [info] LDAP: SSL support available [info] Init: Seeding PRNG with 256 bytes of entropy [info] Init: Generating temporary RSA private keys (512/1024 bits) [info] Init: Generating temporary DH parameters (512/1024 bits) [debug] ssl_scache_shmcb.c(374): shmcb_init allocated 512000 bytes of shared memory [debug] ssl_scache_shmcb.c(554): entered shmcb_init_memory() [debug] ssl_scache_shmcb.c(576): for 512000 bytes, recommending 4265 indexes [debug] ssl_scache_shmcb.c(619): shmcb_init_memory choices follow [debug] ssl_scache_shmcb.c(621): division_mask = 0x1F [debug] ssl_scache_shmcb.c(623): division_offset = 96 [debug] ssl_scache_shmcb.c(625): division_size = 15997 [debug] ssl_scache_shmcb.c(627): queue_size = 2136 [debug] ssl_scache_shmcb.c(629): index_num = 133 [debug] ssl_scache_shmcb.c(631): index_offset = 8 [debug] ssl_scache_shmcb.c(633): index_size = 16 [debug] ssl_scache_shmcb.c(635): cache_data_offset = 8 [debug] ssl_scache_shmcb.c(637): cache_data_size = 13853 [debug] ssl_scache_shmcb.c(650): leaving shmcb_init_memory()

  Read the article

• openstack, bridging, netfilter and dnat

  - by Craig Sanders

  In a recent upgrade (from Openstack Diablo on Ubuntu Lucid to Openstack Essex on Ubuntu Precise), we found that DNS packets were frequently (almost always) dropped on the bridge interface (br100). For our compute-node hosts, that's a Mellanox MT26428 using the mlx4_en driver module. We've found two workarounds for this: Use an old lucid kernel (e.g. 2.6.32-41-generic). This causes other problems, in particular the lack of cgroups and the old version of the kvm and kvm_amd modules (we suspect the kvm module version is the source of a bug we're seeing where occasionally a VM will use 100% CPU). We've been running with this for the last few months, but can't stay here forever. With the newer Ubuntu Precise kernels (3.2.x), we've found that if we use sysctl to disable netfilter on bridge (see sysctl settings below) that DNS started working perfectly again. We thought this was the solution to our problem until we realised that turning off netfilter on the bridge interface will, of course, mean that the DNAT rule to redirect VM requests for the nova-api-metadata server (i.e. redirect packets destined for 169.254.169.254:80 to compute-node's-IP:8775) will be completely bypassed. Long-story short: with 3.x kernels, we can have reliable networking and broken metadata service or we can have broken networking and a metadata service that would work fine if there were any VMs to service. We haven't yet found a way to have both. Anyone seen this problem or anything like it before? got a fix? or a pointer in the right direction? Our suspicion is that it's specific to the Mellanox driver, but we're not sure of that (we've tried several different versions of the mlx4_en driver, starting with the version built-in to the 3.2.x kernels all the way up to the latest 1.5.8.3 driver from the mellanox web site. The mlx4_en driver in the 3.5.x kernel from Quantal doesn't work at all) BTW, our compute nodes have supermicro H8DGT motherboards with built-in mellanox NIC: 02:00.0 InfiniBand: Mellanox Technologies MT26428 [ConnectX VPI PCIe 2.0 5GT/s - IB QDR / 10GigE] (rev b0) we're not using the other two NICs in the system, only the Mellanox and the IPMI card are connected. Bridge netfilter sysctl settings: net.bridge.bridge-nf-call-arptables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-ip6tables = 0 Since discovering this bridge-nf sysctl workaround, we've found a few pages on the net recommending exactly this (including Openstack's latest network troubleshooting page and a launchpad bug report that linked to this blog-post that has a great description of the problem and the solution)....it's easier to find stuff when you know what to search for :), but we haven't found anything on the DNAT issue that it causes.

  Read the article

• Why I am getting "Problem loading the page" after enabling HTTPS for Apache on Windows 7?

  - by Anish

  I enabled HTTPS on the Apache server (2.2.15) Windows 7 Enterprise by uncommenting: Include /private/etc/apache2/extra/httpd-ssl.conf in C:\Program Files (x86)\Apache Software Foundation\Apache2.2\conf\httpd.conf and modifying C:\Program Files (x86)\Apache Software Foundation\Apache2.2\conf\httpd-ssl.conf to include: DocumentRoot "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/htdocs" ServerName myserver.com:443 ServerAdmin [email protected] ... SSLCertificateFile "SSLCertificateFile "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/cert.pem SSLCertificateKeyFile "SSLCertificateFile "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/key.pem" Then I restart apache (going to start-All Progranms-Apache Server 2.2-Control-restart) and go to localhost on port 443 in Firefox , where I get: <<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> <html> <head> <title>Index of /</title> </head> <body> <h1>Index of /</h1> <ul><li><a href="MyPageLinks/"> Links/</a></li> ..... .... </ul> </body></html> But on Display of WebPage I see: Unable to connect Firefox can't establish a connection to the server at localhost. *The site could be temporarily unavailable or too busy. Try again in a few moments. *If you are unable to load any pages, check your computer's network onnection. *If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. I read: Why am I getting 403 Forbidden after enabling HTTPS for Apache on Mac OS X? and added default web server configuration block to match my DocumentRoot The error Log C:\Program Files (x86)\Apache Software Foundation\Apache2.2\logs\error.log gives following error: The Apache2.2 service is running. (OS 5)Access is denied. : Init: Can't open server certificate file C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/cert.pem I checked the permissions for cert.pem and it indicates: All the permissions (Full control, Read, Read and modify, execute, Write) are marked for Admin and I am currently logged in as Admin. I tried using oldcert.pem and oldkey.pem on the same server and it works fine. Is there anything that I missed?

  Read the article

• Virtual Network Interface and NAT disables localhost access for MySQL and Apache

  - by Interarticle

  I'm running an Ubuntu Server 12.04, and recently I configured it to do NAT for my laptop. Since the server has only one NIC, I followed instructions online to create a virtual network device (eth0:0) that has a LAN IP address, then further configured iptables and UFW to allow internet sharing. However, just a few days ago, I discovered that one of the PHP pages hosted on the server failed for no apparent reason. A little digging revealed that the MySQL server started refusing connections from localhost. The same happened with a page (PhpMyAdmin) that was configured to be accessible only from localhost (in Apache2). The error, as shown by $mysql --protocol=tcp -u root -p looks like ERROR 1130 (HY000): Host '<host name of eth0>' is not allowed to connect to this MySQL server However, the funny thing is, I configured the mysql server to allow root access from localhost (only). Moreover, the mysql server listens only on 127.0.0.1:3306, as shown by: sudo netstat -npa | head Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 1029/mysqld which means that the connection could have only come from 127.0.0.1 (Note that MySQL is working because I can still connect to it via unix domain sockets) In effect, it seems that all tcp connections originating from 127.0.0.1 to 127.0.0.1 appear to any local daemon to come from the eth0 IP address. Indeed, apache2 allowed me to access PhpMyAdmin after I added allow <eth0 IP address>. The following are my network configurations (redacted): /etc/hosts: 127.0.0.1 localhost 211.x.x.x <host name of eth0> <server name> #IPv6 Defaults follows .... /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 211.x.x.x netmask 255.255.255.0 gateway 211.x.x.x dns-nameservers 8.8.8.8 # dns-* options are implemented by the resolvconf package, if installed dns-search xxxxxxx.com hwaddress ether xx:xx:xx:xx:xx:xx auto eth0:0 iface eth0:0 inet static address 192.168.57.254 netmask 255.255.254.0 broadcast 192.168.57.255 network 192.168.57.0 /etc/ufw/sysctl.conf: #Uncommented the following lines net/ipv4/ip_forward=1 net/ipv6/conf/default/forwarding=1 /etc/default/ufw: DEFAULT_FORWARD_POLICY="ACCEPT" #Changed DROP to ACCEPT /etc/init/internet-sharing.conf (upstart script I wrote), section pre-start script: iptables -A FORWARD -o eth0 -i eth0:0 -s 192.168.57.22 -m conntrack --ctstate NEW -j ACCEPT iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT iptables -A POSTROUTING -t nat -j MASQUERADE Note again that my problem here is that programs cannot access localhost tcp services, from the server itself, and that access is blocked because the services have access control allowing only 127.0.0.1. I have no problem connecting (as in TCP connections) to services via tcp, even if the services listen only on 127.0.0.1. I do NOT want to connect to the services from another computer.

  Read the article

• MySQL daemon keeps terminating unexpectedly

  - by Yehia A.Salam

  The MySQL daemon on my CentOS server keeps crashing, i got the logs from /var/logs/mysqld but still i am not sure how to fix this: 121114 16:22:56 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended 121114 21:55:11 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 121114 21:55:11 [Note] Plugin 'FEDERATED' is disabled. 121114 21:55:11 InnoDB: The InnoDB memory heap is disabled 121114 21:55:11 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121114 21:55:11 InnoDB: Compressed tables use zlib 1.2.3 121114 21:55:11 InnoDB: Using Linux native AIO 121114 21:55:11 InnoDB: Initializing buffer pool, size = 128.0M 121114 21:55:11 InnoDB: Completed initialization of buffer pool 121114 21:55:11 InnoDB: highest supported file format is Barracuda. InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 121114 21:55:11 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 121114 21:55:12 InnoDB: Waiting for the background threads to start 121114 21:55:13 InnoDB: 1.1.6 started; log sequence number 77177262 121114 21:55:13 [Note] Event Scheduler: Loaded 0 events 121114 21:55:13 [Note] /usr/libexec/mysqld: ready for connections. Version: '5.5.12' socket: '/var/lib/mysql/mysql.sock' port: 3306 MySQL Community Server (GPL) by Remi 121115 00:19:44 mysqld_safe Number of processes running now: 0 121115 00:19:44 mysqld_safe mysqld restarted 121115 0:19:47 [Note] Plugin 'FEDERATED' is disabled. 121115 0:19:47 InnoDB: The InnoDB memory heap is disabled 121115 0:19:47 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121115 0:19:47 InnoDB: Compressed tables use zlib 1.2.3 121115 0:19:47 InnoDB: Using Linux native AIO 121115 0:19:47 InnoDB: Initializing buffer pool, size = 128.0M InnoDB: mmap(137363456 bytes) failed; errno 12 121115 0:19:47 InnoDB: Completed initialization of buffer pool 121115 0:19:47 InnoDB: Fatal error: cannot allocate memory for the buffer pool 121115 0:19:47 [ERROR] Plugin 'InnoDB' init function returned error. 121115 0:19:47 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 121115 0:19:47 [ERROR] Unknown/unsupported storage engine: InnoDB 121115 0:19:47 [ERROR] Aborting Edit #1 total used free shared buffers cached Mem: 496 370 126 0 24 110 -/+ buffers/cache: 234 261 Swap: 1023 9 1014 Edit #2 Also, largest table in my mysql is 20MB, so my the memory used should be pretty moderate. SELECT CONCAT(table_schema, '.', table_name), CONCAT(ROUND(table_rows / 1000000, 2), 'M') rows, CONCAT(ROUND(data_length / ( 1024 * 1024 * 1024 ), 2), 'G') DATA, CONCAT(ROUND(index_length / ( 1024 * 1024 * 1024 ), 2), 'G') idx, CONCAT(ROUND(( data_length + index_length ) / ( 1024 * 1024 * 1024 ), 2), 'G') total_size, ROUND(index_length / data_length, 2) idxfrac FROM information_schema.TABLES ORDER BY data_length + index_length DESC LIMIT 10;

  Read the article

• Nginx phpmyadmin redirecting to / instead of /phpmyadmin upon login

  - by Frederik Nielsen

  I am having issues with my phpmyadmin on my nginx install. When I enter <ServerIP>/phpmyadmin and logs in, I get redirected to <ServerIP>/index.php?<tokenstuff> instead of <ServerIP>/phpmyadmin/index.php?<tokenstuff> Nginx config file: user nginx; worker_processes 5; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; keepalive_timeout 2; #gzip on; include /etc/nginx/conf.d/*.conf; } Default.conf: server { listen 80; server_name _; #charset koi8-r; #access_log /var/log/nginx/log/host.access.log main; location / { root /usr/share/nginx/html; index index.php index.html index.htm; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root /usr/share/nginx/html; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { root /usr/share/nginx/html; try_files $uri =404; fastcgi_pass unix:/tmp/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # location ~ /\.ht { deny all; } location /phpmyadmin { root /usr/share/; index index.php index.html index.htm; location ~ ^/phpmyadmin/(.+\.php)$ { try_files $uri =404; root /usr/share/; fastcgi_pass unix:/tmp/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $request_filename; include fastcgi_params; fastcgi_param PATH_INFO $fastcgi_script_name; } location ~* ^/phpmyadmin/(.+\.(jpg|jpeg|gif|css|png|js|ico|html|xml|txt))$ { root /usr/share/; } } } (Any general tips on tidying op those config files are accepted too)

  Read the article

• apache mod_cache in v2.2 - enable cache based on url

  - by Janning

  We are using apache2.2 as a front-end server with application servers as reverse proxies behind apache. We are using mod_cache for some images and enabled it like this: <IfModule mod_disk_cache.c> CacheEnable disk / CacheRoot /var/cache/apache2/mod_disk_cache CacheIgnoreCacheControl On CacheMaxFileSize 2500000 CacheIgnoreURLSessionIdentifiers jsessionid CacheIgnoreHeaders Set-Cookie </IfModule> The image urls vary completely and have no common start pattern, but they all end in ".png". Thats why we used the root in CacheEnable / If not served from the cache, the request is forwarded to an application server via reverse proxy. So far so good, cache is working fine. But I really only need to cache all image request ending in ".png". My above configuration still works as my application server send an appropriate Cache-Control: no-cache header on the way back to apache. So most pages send a no-cache header back and they get not cached at all. My ".png" responses doesn't send a Cache-Control header so apache is only going to cache all urls with ".png". Fine. But when a new request enters apache, apache does not know that only .png requests should be considered, so every request is checking a file on disk (recorded with strace -e trace=file -p pid): [pid 19063] open("/var/cache/apache2/mod_disk_cache/zK/q8/Kd/g6OIv@woJRC_ba_A.header", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) I don't want to have apache going to disk every request, as the majority of requests are not cached at all. And we have up to 10.000 request/s at peak time. Sometimes our read IO wait spikes. It is not getting really slow, but we try to tweak it for better performance. In apache 2.4 you can say: <LocationMatch .png$> CacheEnable disk </LocationMatch> This is not possible in 2.2 and as I see no backports for debian I am not going to upgrade. So I tried to tweak apache2.2 to follow my rules: <IfModule mod_disk_cache.c> SetEnvIf Request_URI "\.png$" image RequestHeader unset Cache-Control RequestHeader append Cache-Control no-cache env=!image CacheEnable disk / CacheRoot /var/cache/apache2/mod_disk_cache #CacheIgnoreCacheControl on CacheMaxFileSize 2500000 CacheIgnoreURLSessionIdentifiers jsessionid CacheIgnoreHeaders Set-Cookie </IfModule> The idea is to let apache decide to serve request from cache based on Cache-control header (CacheIgnoreCacheControl default to off). And before simply set a RequestHeader based on the request. If it is not an image request, set a Cache-control header, so it should bypass the cache at all. This does not work, I guess because of late processing of RequestHeader directive, see https://httpd.apache.org/docs/2.2/mod/mod_headers.html#early I can't add early processing as "early" keyword can't be used together with a conditional "env=!image" I can't change the url requesting the images and I know there are of course other solutions. But I am only interested in configuring apache2.2 to reach my goal. Does anybody has an idea how to achieve my goal?

  Read the article

• Postfix configuration - Uing virtual min but server is bouncing back my mail.

  - by brodiebrodie

  I have no experience in setting up postfix, and thought virtualmin minght do the legwork for me. Appears not. When I try to send mail to the domain (either [email protected] [email protected] or [email protected]) I get the following message returned This is the mail system at host dedq239.localdomain. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to <postmaster> If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system <[email protected]> (expanded from <[email protected]>): User unknown in virtual alias table Final-Recipient: rfc822; [email protected] Original-Recipient: rfc822;[email protected] Action: failed Status: 5.0.0 Diagnostic-Code: X-Postfix; User unknown in virtual alias table How can I diagnose the problem here? It seems that the mail gets to my server but the server fails to locally deliver the message to the correct user. (This is a guess, truthfully I have no idea what is happening). I have checked my virtual alias table and it seems to be set up correctly (I can post if this would be helpful). Can anyone give me a clue as to the next step? Thanks alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 html_directory = no local_recipient_maps = $virtual_mailbox_maps mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = permit_mynetworks reject_unauth_destination smtpd_sasl_auth_enable = yes soft_bounce = no unknown_local_recipient_reject_code = 550 virtual_alias_maps = hash:/etc/postfix/virtual My mail log file (the last entry) Sep 30 15:13:47 dedq239 postfix/cleanup[7237]: 207C6B18158: message-id=<[email protected]> Sep 30 15:13:47 dedq239 postfix/qmgr[7177]: 207C6B18158: from=<[email protected]>, size=1805, nrcpt=1 (queue active) Sep 30 15:13:47 dedq239 postfix/error[7238]: 207C6B18158: to=<[email protected]>, orig_to=<[email protected]>, relay=none, delay=0.64, delays=0.61/0.01/0/0.02, dsn=5.0.0, status=bounced (User unknown in virtual alias table) Sep 30 15:13:47 dedq239 postfix/cleanup[7237]: 8DC13B18169: message-id=<[email protected]> Sep 30 15:13:47 dedq239 postfix/qmgr[7177]: 8DC13B18169: from=<>, size=3691, nrcpt=1 (queue active) Sep 30 15:13:47 dedq239 postfix/bounce[7239]: 207C6B18158: sender non-delivery notification: 8DC13B18169 Sep 30 15:13:47 dedq239 postfix/qmgr[7177]: 207C6B18158: removed Sep 30 15:13:48 dedq239 postfix/smtp[7240]: 8DC13B18169: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[209.85.216.55]:25, delay=1.3, delays=0.02/0.01/0.58/0.75, dsn=2.0.0, status=sent (250 2.0.0 OK 1254348828 36si15082901pxi.91) Sep 30 15:13:48 dedq239 postfix/qmgr[7177]: 8DC13B18169: removed Sep 30 15:14:17 dedq239 postfix/smtpd[7233]: disconnect from mail-bw0-f228.google.com[209.85.218.228] etc.aliases file below I have not touched this file - myvirtualdomain is a replacement for my real domain name # Aliases in this file will NOT be expanded in the header from # Mail, but WILL be visible over networks or from /bin/mail. # # >>>>>>>>>> The program "newaliases" must be run after # >> NOTE >> this file is updated for any changes to # >>>>>>>>>> show through to sendmail. # # Basic system aliases -- these MUST be present. mailer-daemon: postmaster postmaster: root # General redirections for pseudo accounts. bin: root daemon: root adm: root lp: root sync: root shutdown: root halt: root mail: root news: root uucp: root operator: root games: root gopher: root ftp: root nobody: root radiusd: root nut: root dbus: root vcsa: root canna: root wnn: root rpm: root nscd: root pcap: root apache: root webalizer: root dovecot: root fax: root quagga: root radvd: root pvm: root amanda: root privoxy: root ident: root named: root xfs: root gdm: root mailnull: root postgres: root sshd: root smmsp: root postfix: root netdump: root ldap: root squid: root ntp: root mysql: root desktop: root rpcuser: root rpc: root nfsnobody: root ingres: root system: root toor: root manager: root dumper: root abuse: root newsadm: news newsadmin: news usenet: news ftpadm: ftp ftpadmin: ftp ftp-adm: ftp ftp-admin: ftp www: webmaster webmaster: root noc: root security: root hostmaster: root info: postmaster marketing: postmaster sales: postmaster support: postmaster # trap decode to catch security attacks decode: root # Person who should get root's mail #root: marc abuse-myvirtualdomain.com: [email protected] My etc/postfix/virtual file is below - again myvirtualdomain is a replacement. I think this file was generated by Virtualmin and I have tried messing around with is with no success... This is the version without my changes. myunixusername@myvirtualdomain .com myunixusername myvirtualdomain .com myvirtualdomain.com [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected]

  Read the article

• OpenBSD pf 'match in all scrub (no-df)' causes HTTPS to be unreachable on mobile network

  - by Frank ter V.

  First of all: excuse me for my poor usage of the English language. For several years I'm experiencing problems with the 'match in all scrub (no-df)' rule in pf. I can't find out what's happening here. I'll try to be clear and simple. The pf.conf has been extremely shortened for this forum posting. Here is my pf.conf: set skip on lo0 match in all scrub (no-df) block all block in quick from urpf-failed pass in on em0 proto tcp from any to 213.125.xxx.xxx port 80 synproxy state pass in on em0 proto tcp from any to 213.125.xxx.xxx port 443 synproxy state pass out on em0 from 213.125.xxx.xxx to any modulate state HTTP and HTTPS are working fine. Until the moment a customer in France (Wanadoo DSL) couldn't view HTTPS pages! I blamed his provider and did no investigation on that problem. But then... I bought an Android Samsung Galaxy SII (Vodafone) to monitor my servers. Hours after I walked out of the telephone store: no HTTPS-connections on my server! I thought my servers were down, drove back to the office very fast. But they were up. I discovered that disabling the rule match in all scrub (no-df) solves the problem. Android phone (Vodafone NL) and Wanadoo DSL FR are now OK on HTTPS. But now I don't have any scrubbing anymore. This is not what I want. Does anyone here understand what is going on? I don't. Enabling scrubbing causes HTTPS webpages not to be loaded on SOME ISP's, but not all. In systat, I strangely DO see a state created and packets received from those ISP's... Still confused. I'm using OpenBSD 5.1/amd64 and OpenBSD 5.0/i386. I have two ISP's at my office (one DSL and one cable). Affects both. This can be reproduced quite easily. I hope someone has experience with this problem. Greetings, Frank

  Read the article

• Configure Postfix to Port other than 25

  - by bwheeler96

  I've done quite a bit of googling on how to reconfigure postfix to work on a different port, but I still can't fond the line(s) people keep talking about in my master.cf. I'm using OS X Mountain Lion, and my ISP blocks traffic both ways on port 25. people have said to look for a line that says smtp inet n - n - - smtpd I can't find it. This is (what I believe to be) unmodified # ==== Begin auto-generated section ======================================== # This section of the master.cf file is auto-generated by the Server Admin # Mail backend plugin whenever mails settings are modified. smtp inet n - n - 1 postscreen smtpd pass - - n - - smtpd dnsblog unix - - n - 0 dnsblog tlsproxy unix - - n - 0 tlsproxy submission inet n - n - - smtpd -o smtpd_tls_security_level=encrypt smtp unix - - n - - smtp # === End auto-generated section =========================================== # Modern SMTP clients communicate securely over port 25 using the STARTTLS command. # Some older clients, such as Outlook 2000 and its predecessors, do not properly # support this command and instead assume a preconfigured secure connection # on port 465. This was sometimes called "smtps", but such usage was never # approved by the IANA and therefore conflicts with another, legitimate assignment. # For more details about managing secure SMTP connections with postfix, please see: # http://www.postfix.org/TLS_README.html # To read more about configuring secure connections with Outlook 2000, please read: # http://support.microsoft.com/default.aspx?scid=kb;en-us;Q307772 # Apple does not support the use of port 465 for this purpose. # After determining that connecting clients do require this behavior, you may choose # to manually enable support for these older clients by uncommenting the following # four lines. #465 inet n - n - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - n - - smtp pickup fifo n - n 60 1 pickup cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify sacl-cache unix - - n - 1 sacl-cache flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - n - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - n - - showq error unix - - n - - error retry unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants.

  Read the article

• What do you use to store all of your personal data?

  - by codeflunky

  I have been on a quest for years to find the perfect tool to store all "my stuff". You know... personal information, code snippets, software keys, people's birthdays, whatever. There are lots of tools out there for this sort of thing, but I've never found any of them quite what I need. Ideally, I would just be able to type some notes, tag them (I don't like the idea of folder organization... too cumbersome) and then easily search and retrieve what I need later. It seems so simple, but for some reason I just can't find it. I currently use Backpack (sometimes), which is OK, but I hate the fact that you always have to create "pages" to store things. I don't want to have to do that. I want to just type some notes, tag it and save. That's it. And Backpack didn't even have search for a long time. What I do like about Backpack is that it's fast and it's web based. I've tried some desktop apps, which probably came closer to the functionality I want, but I just hate being tied to a single machine. I want to be able to get to my stuff anywhere, so the web based thing is a definite requirement. Anyway, I'm thinking about writing my own thing for this if I can't find anything, but before I make the attempt, I was wondering if anyone has any suggestions? I've used Backpack, Zoho Planner, Stikkit and Google Notes so far, and they are not quite to my liking. Anyone? (Sorry if this is off-topic, but I figured you guys might be legitimately into this kind of thing... you know, storing code snippets and such.) UPDATE: I've been using Evernote for a few days, and it is exactly what I've been looking for. It is totally tag based and allows both online and offline usage. The desktop app sits in your system tray and allows you to add whatever you want on the fly either as text notes or clippings from the browser. It also syncs it to the web (if you want) where you can get to it from anywhere using their web client. They even have a mobile client which I haven't used, but I will try it soon. Thanks again 18hrs. I wish I could give you 10 upvotes.

  Read the article

• Secondary DHCP server won't start on Centos 6.2

  - by Slowjoe

  I'm trying to create a backup DHCP server. Server times are in sync. Primary server starts fine. Secondary server won't start. Error from /var/log/messages is: Sep 15 14:47:45 stream dhcpd: Copyright 2004-2010 Internet Systems Consortium. Sep 15 14:47:45 stream dhcpd: All rights reserved. Sep 15 14:47:45 stream dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 25: invalid statement in peer declaration Sep 15 14:47:45 stream dhcpd: #011max-response-default Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 41: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 49: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: WARNING: Host declarations are global. They are not limited to the scope you declared them in. Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 70: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 78: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: Configuration file errors encountered -- exiting Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: This version of ISC DHCP is based on the release available Sep 15 14:47:45 stream dhcpd: on ftp.isc.org. Features have been added and other changes Sep 15 14:47:45 stream dhcpd: have been made to the base software release in order to make Sep 15 14:47:45 stream dhcpd: it work better with this distribution. Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: Please report for this software via the CentOS Bugs Database: Sep 15 14:47:45 stream dhcpd: http://bugs.centos.org/ Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: exiting. Config file contents: # DHCP Server Configuration file. # see /usr/share/doc/dhcp*/dhcpd.conf.sample # see 'man 5 dhcpd.conf' # option domain-name "eng.foo.com"; option domain-name-servers ns0.eng.foo.com, ns1.eng.foo.com; option ntp-servers ntp.eng.foo.com; #option time-servers ntp.eng.foo.com; default-lease-time 3600; max-lease-time 7200; authoritative; log-facility local7; failover peer "dhcp-failover" { secondary; address 10.0.1.70; port 647; peer address 10.0.1.11; peer port 647; max-response-default 30; max-unacked-updates 10; load balance max seconds 3; } # # Management subnet # subnet 10.0.0.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; option broadcast-address 10.0.0.255; option routers 10.0.0.1; option domain-search "eng.foo.com", "foo.com"; # Unknown clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 300; range 10.0.0.240 10.0.0.249; allow unknown-clients; } # Known clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 28800; range 10.0.0.150 10.0.0.199; deny unknown-clients; } include "/etc/dhcp/dhcpd.conf-engmgmt"; } # # Data subnet # subnet 10.0.1.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; option broadcast-address 10.0.1.255; option routers 10.0.1.1; option domain-search "eng.foo.com", "foo.com"; # Unknown clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 300; range 10.0.1.240 10.0.1.249; allow unknown-clients; } # Known clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 28800; range 10.0.1.150 10.0.1.199; deny unknown-clients; } # For centos network installs if substring (option vendor-class-identifier, 0, 8) = "anaconda" { filename "/autohome/distro/ks/"; next-server eng-data.eng.foo.com; } # For PXE network installs if substring (option vendor-class-identifier, 0, 9) = "PXEClient" { filename "pxelinux.0"; next-server eng-data.eng.foo.com; } # For KVM PXE network installs if substring (option vendor-class-identifier, 0, 9) = "Etherboot" { filename "pxelinux.0"; next-server eng-data.eng.foo.com; } include "/etc/dhcp/dhcpd.conf-engdata"; }

  Read the article

• Trailing dots in url result in empty 404 page on IIS

  - by Peter Hahndorf

  I have an ASP.NET site on IIS8, but IIS7.5 behaves exactly the same. When I enter a URL like: mysite.com/foo/bar.. I get the following error with a '500 Internal Server Error' status code: even though I have custom error pages set up for 500 and 404 and I don't see anything wrong with my custom error page. In my web.config system.web node I have the following: <customErrors mode="On"> <error statusCode="404" redirect="/404.aspx" /> </customErrors> If I remove that section, I get a 404.0 response back but the page itself is blank. In web.config system.webServer I have: <httpErrors errorMode="DetailedLocalOnly"> <remove statusCode="404" subStatusCode="-1" /> <error statusCode="404" prefixLanguageFilePath="" path="404.html" responseMode="File" /> </httpErrors> But whether that is there or not, I get the same blank 404.0 page rather than my expected custom error page, or at least an internal IIS message. So first of all why is the asp.net handler picking up a request for '..' (also works with one or more trailing dots) If I remove the following handler from applicacationHost.config: <add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="GET,HEAD,POST,DEBUG" type="System.Web.Handlers.TransferRequestHandler" preCondition="integratedMode,runtimeVersionv4.0" responseBufferLimit="0" /> I get my expected custom 404 page, but of course removing that handler breaks routing in asp.net among other things. Looking at the failure trace I see: Windows Authentication is disabled for the site, so why is that module even in the request pipeline? For now my fix is to use the URL Rewrite module with the following rule: <rewrite> <rules> <rule name="Trailing Dots" stopProcessing="true"> <match url="\.+$" /> <action type="Rewrite" url="/404.html" appendQueryString="false" /> </rule> </rules> </rewrite> This works okay, but I wonder why IIS/ASP.NET behaves this way?

  Read the article

• postfix 5.7.1 Relay access denied when sending mail with cron

  - by zensys

  Reluctant to ask because there is so much here about 'postfix relay access denied' but I cannot find my case: I use php (Zend Framework) to send emails outside my network using the Google mail server because I could not send mail outside my server (user: web). However when I sent out an email via cron (user: root, I believe), still using ZF, using the same mail config/credentials, I get the message: '5.7.1 Relay access denied' I guess I need to know one of two things: 1. How can I use the google smtp server from cron 2. What do I need to change in my config to send mail using my own server instead of google Though the answer to 2. is the more structural solution I assume, I am quite happy with an answer to 1. as well because I think Google is better at server maintaince (security/spam) than I am. Below my ZF application.ini mail section, main.cf and master.cf: application.ini: resources.mail.transport.type = smtp resources.mail.transport.auth = login resources.mail.transport.host = "smtp.gmail.com" resources.mail.transport.ssl = tls resources.mail.transport.port = 587 resources.mail.transport.username = [email protected] resources.mail.transport.password = xxxxxxx resources.mail.defaultFrom.email = [email protected] resources.mail.defaultFrom.name = "my company" main.cf: # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = /usr/share/doc/postfix # TLS parameters smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = mail.second-start.nl mydomain = second-start.nl alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all html_directory = /usr/share/doc/postfix/html message_size_limit = 30720000 virtual_alias_domains = virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /home/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_authenticated_header = yes # see under Spam smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps virtual_transport = dovecot dovecot_destination_recipient_limit = 1 # Spam disable_vrfy_command = yes smtpd_delay_reject = yes smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, check_helo_access hash:/etc/postfix/helo_access, reject_non_fqdn_hostname, reject_invalid_hostname, permit smtpd_recipient_restrictions = permit_sasl_authenticated, reject_unauth_destination, reject_invalid_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unknown_sender_domain, reject_unknown_recipient_domain, permit_mynetworks, reject_non_fqdn_hostname, reject_rbl_client sbl.spamhaus.org, reject_rbl_client zen.spamhaus.org, reject_rbl_client cbl.abuseat.org, reject_rbl_client bl.spamcop.net, permit smtpd_error_sleep_time = 1s smtpd_soft_error_limit = 10 smtpd_hard_error_limit = 20 master.cf: # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - - - - smtpd #smtp inet n - - - 1 postscreen #smtpd pass - - - - - smtpd #dnsblog unix - - - - 0 dnsblog #tlsproxy unix - - - - 0 tlsproxy #submission inet n - - - - smtpd # -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - - - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - - - - qmqpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - - 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - - - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - - - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - - - - showq error unix - - - - - error retry unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient} # # ==================================================================== # # Recent Cyrus versions can use the existing "lmtp" master.cf entry. # # Specify in cyrus.conf: # lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4 # # Specify in main.cf one or more of the following: # mailbox_transport = lmtp:inet:localhost # virtual_transport = lmtp:inet:localhost # # ==================================================================== # # Cyrus 2.1.5 (Amos Gouaux) # Also specify in main.cf: cyrus_destination_recipient_limit=1 # #cyrus unix - n n - - pipe # user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} # # ==================================================================== # Old example of delivery via Cyrus. # #old-cyrus unix - n n - - pipe # flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user} # # ==================================================================== # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -d ${recipient}

  Read the article

• nginx proxypath https redirect fails without trailing slash

  - by Thermionix

  I'm trying to setup Nginx to forward requests to several backend services using proxy_pass. The links on the pages that lack trailing slashes do have https:// in front, but get redirected to a http request with a trailing slash - which ends in connection refused - I only want these services to be available through https. So if a link is too https://example.com/internal/errorlogs in a browser when loaded https://example.com/internal/errorlogs gives Error Code 10061: Connection refused (it redirects to http://example.com/internal/errorlogs/) If I manually append the trialing slash https://example.com/internal/errorlogs/ it loads I've tried with varied trailing forward slashes appended to the proxypath and location in proxy.conf to no effect, have also added server_name_in_redirect off; This happens on more than one app under nginx, and works in apache reverse proxy Config files; proxy.conf location /internal { proxy_pass http://localhost:8081/internal; include proxy.inc; } .... more entries .... sites-enabled/main server { listen 443; server_name example.com; server_name_in_redirect off; include proxy.conf; ssl on; } proxy.inc proxy_connect_timeout 59s; proxy_send_timeout 600; proxy_read_timeout 600; proxy_buffer_size 64k; proxy_buffers 16 32k; proxy_pass_header Set-Cookie; proxy_redirect off; proxy_hide_header Vary; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; proxy_set_header Accept-Encoding ''; proxy_ignore_headers Cache-Control Expires; proxy_set_header Referer $http_referer; proxy_set_header Host $host; proxy_set_header Cookie $http_cookie; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-Host $host; proxy_set_header X-Forwarded-Server $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Ssl on; proxy_set_header X-Forwarded-Proto https; curl output -$ curl -I -k https://example.com/internal/errorlogs/ HTTP/1.1 200 OK Server: nginx/1.0.5 Date: Thu, 24 Nov 2011 23:32:07 GMT Content-Type: text/html;charset=utf-8 Connection: keep-alive Content-Length: 14327 -$ curl -I -k https://example.com/internal/errorlogs HTTP/1.1 301 Moved Permanently Server: nginx/1.0.5 Date: Thu, 24 Nov 2011 23:32:11 GMT Content-Type: text/html;charset=utf-8 Connection: keep-alive Content-Length: 127 Location: http://example.com/internal/errorlogs/

  Read the article

• Lync server 2010 Active Directory Preparation with a Windows Server 2003 DC

  - by juFo

  I'm trying to install Lync server 2010 but i'm stuck for a while now with the "Active Directory Preparation" part of the Lync server 2010 installation. The "Prepare Schema" fails with the following error: "Step 1: Prepare Schema Run once per deployment. Extends the schema for Lync Server. Not Available: Failure occurred while attempting to check the schema state. Please ensure Active Directory is reachable." screenshot: https://skydrive.live.com/#cid=CB15F1A932B364BE&id=CB15F1A932B364BE%211742 The situation: 1 server with Windows Server 2003 (x86), which is the only Domain Controller (DC) 1 server with Windows Server 2008 R2 (x64) where Lync should be installed. First I have found that the DFL/FFL were not correct: On the DC (server2003) I have changed the Domain Functional Level to Windows Server 2003 and also the Forest Functional Level to Windows Server 2003. If I check these settings on the Server2008 with Active Directory Domains and Trusts, I see indeed that the DFL and FFL are being set to Windows Server 2003. (Windows Server 2003 is the minimum required for Lync server 2010) I tried the Lync AD Preparation again but still got the same message: https://skydrive.live.com/#cid=CB15F1A932B364BE&id=CB15F1A932B364BE%211742 I'm logged in on the Server2008 and Server2003 with the domain administrator account. If I check "Active Directory Users and Computers" and go to the directory Users and watch the properties from the Administrator User then it is also a Member of: Domain Admins Domain Users Enterprise Admins Schema Admins Group Policy Creator Owners The firewall on the server2008 is turned off, still nog working So now my question is: what should I do to make the Lync setup (Active Directory Preparation) work? (I would appreciate clear step-by-step suggestions to check.) Thanks in advance. Update 1: Now I've extended AD successfully on the 2003 DC, using this link: http://blogs.pointbridge.com/Blogs/sloan_jason/Pages/Post.aspx?_ID=2 but when I check the Active Directory Preparation again on the Lync install, it still gives me the same error as in the screenshot I've provided. Update 2: I found out that there is a log on "C:\Users\\AppData\Local\Temp\ with this: Get-CSDomainState Get Domain State Error: An error occurred: "Microsoft.Rtc.Management.ADConnect.NoSuitableServerFoundException" "No suitable domain controller was found in domain "OurDomain.LOCAL". Errors:\r\n"OurDCserver.OurDomain.LOCAL5.2 (3790)5.2 (3790) Service Pack1OurDCserver.OurDomain.LOCAL5.2 (3790)5.2 (3790)Service Pack 1"" I thought Lync could be installed with a Windows Server 2003 (according to the documentation on technet) and it doesn't require a SP. :s

  Read the article

• How can I centralise MySQL data between 3 or more geographically separate servers?

  - by Andy Castles

  To explain the background to the question: We have a home-grown PHP application (for running online language-learning courses) running on a Linux server and using MySQL on localhost for saving user data (e.g. results of tests taken, marks of submitted work, time spent on different pages in the courses, etc). As we have students from different geographic locations we currently have 3 virtual servers hosted close to those locations (Spain, UK and Hong Kong) and users are added to the server closest to them (they access via different URLs, e.g. europe.domain.com, uk.domain.com and asia.domain.com). This works but is an administrative nightmare as we have to remember which server a particular user is on, and users can only connect to one server. We would like to somehow centralise the information so that all users are visible on any of the servers and users could connect to any of the 3 servers. The question is, what method should we use to implement this. It must be an issue that that lots of people have encountered but I haven't found anything conclusive after a fair bit of Googling around. The closest I have seen to solutions are: something like master-master replication, but I have read so many posts suggesting that this is not a good idea as things like auto_increment fields can break. circular replication, this sounded perfect but to quote from O'Reilly's High Performance MySQL, "In general, rings are brittle and best avoided" We're not against rewriting code in the application to make it work with whatever solution is required but I am not sure if replication is the correct thing to use. Thanks, Andy P.S. I should add that we experimented with writes to a central database and then using reads from a local database but the response time between the different servers for writing was pretty bad and it's also important that written data is available immediately for reading so if replication is too slow this could cause out-of-date data to be returned. Edit: I have been thinking about writing my own rudimentary replication script which would involve something like having each user given a server ID to say which is his "home server", e.g. users in asia would be marked as having the Hong Kong server as their own server. Then the replication scripts (which would be a PHP script set to run as a cron job reasonably frequently, e.g. every 15 minutes or so) would run independently on each of the servers in the system. They would go through the database and distribute any information about users with the "home server" set to the server that the script is running on to all of the other databases in the system. They would also need to suck new information which has been added to any of the other databases on the system where the "home server" flag is the server where the script is running. I would need to work out the details and build in the logic to deal with conflicts but I think it would be possible, however I wanted to make sure that there is not a correct solution for this already out there as it seems like it must be a problem that many people have already come across.

  Read the article

• Stop squid caching 302 and 307 with deny_info

  - by 0xception

  TLDR: 302, 307 and Error pages are being cached. Need to force a refresh of the content. Long version: I've setup a very minimal squid instance running on a gateway which shouldn't not cache ANYTHING but needs to be solely used as a domain based web filter. I'm using another application which redirects un-authenticated users to the proxy which then uses the deny_info option redirects any non-whitelisted request to the login page. After the user has authenticated the firewall rule gets placed so they no longer get sent to the proxy. The problem is that when a user hits a website (xkcd.com) they are unauthenticated so they get redirected via the firewall: iptables -A unknown-user -t nat -p tcp --dport 80 -j REDIRECT --to-port 39135 to the proxy at this point squid redirects the user to the login page using a 302 (i've also tried 307, and i've also make sure the headers are set to no-cache and/or no-store for Cache-Control and Pragma). Then when the user logs into the system they get firewall rule which no longer directs them to the squid proxy. But if they go to xkcd.com again they will have the original redirection page cached and will once again get the login page. Any idea how to force these redirects to NOT be cached by the browser? Perhaps this is a problem w/ the browsers and not squid, but not sure how to get around it. Full squid config below. # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 acl localnet src 192.168.182.0/23 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl https port 443 acl http port 80 acl CONNECT method CONNECT # # Disable Cache # cache deny all via off negative_ttl 0 seconds refresh_all_ims on #error_default_language en # Allow manager access only from localhost http_access allow manager localhost http_access deny manager # Deny access to anything other then http http_access deny !http # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !https visible_hostname gate.ovatn.net # Disable memory pooling memory_pools off # Never use neigh cache objects for cgi-bin scripts hierarchy_stoplist cgi-bin ? # # URL rewrite Test Settings # #acl whitelist dstdomain "/etc/squid/domains-pre.lst" #url_rewrite_program /usr/lib/squid/redirector #url_rewrite_access allow !whitelist #url_rewrite_children 5 startup=0 idle=1 concurrency=0 #http_access allow all # # Deny Info Error Test # acl whitelist dstdomain "/etc/squid/domains-pre.lst" deny_info http://login.domain.com/ whitelist #deny_info ERR_ACCESS_DENIED whitelist http_access deny !whitelist http_access allow whitelist http_port 39135 transparent ## Debug Values access_log /var/log/squid/access-pre.log cache_log /var/log/squid/cache-pre.log # Production Values #access_log /dev/null #cache_log /dev/null # Set PID file pid_filename /var/run/gatekeeper-pre.pid SOLUTION: I believe I might have found a solution to this. After days and days trying to figure it out, only through a random stumble I found client_persistent_connections off server_persistent_connections off This did the trick. So it wasn't so much cache as it was a single persistent connection messing things up. W000T!

  Read the article

• web services access not being reached thru the web browser

  - by Tony

  I am trying to reference my .asmx webservices in .NET but my server is not exposed to the internet. When I put on the following address I get the message mentioned below. What's the reason for not being able to see the directory? Am I missing something in my IIS configuraction? Am I missing anything in my permissions? Just as reference I have other folders with webservices and I have the same issue. When I login to the server I am doing it with my windows user and password (I am using windows authentication). It's necessary to mention that when I put the URL I am getting a popup screen to put in my userid and password but it seems that's not able to validate since keeps asking me a couple of times. Let me know if you need more information to address this issue . http://appsvr02/Inetpub/wwwroot/DevWebApi/ Internet Explorer cannot display the webpage What you can try: It appears you are connected to the Internet, but you might want to try to reconnect to the Internet. Retype the address. Go back to the previous page. Most likely causes: •You are not connected to the Internet. •The website is encountering problems. •There might be a typing error in the address. More information This problem can be caused by a variety of issues, including: •Internet connectivity has been lost. •The website is temporarily unavailable. •The Domain Name Server (DNS) is not reachable. •The Domain Name Server (DNS) does not have a listing for the website's domain. •If this is an HTTPS (secure) address, click tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For offline users You can still view subscribed feeds and some recently viewed webpages. To view subscribed feeds 1.Click the Favorites Center button , click Feeds, and then click the feed you want to view. To view recently visited webpages (might not work on all pages) 1.Click Tools , and then click Work Offline. 2.Click the Favorites Center button , click History, and then click the page you want to view.

  Read the article

• prevent filesystem from entering read-only mode

  - by user788171

  I have found that my server's filesystem is continuously entering read-only mode. There have been some issues with the raid1 array, but I have removed the bad disk from the array. However, it is still physically plugged into the system because I haven't had a chance to go over to the datacentre, I suspect udev and the system kernel is still picking up the bad disk and throwing errors. In /var/log/messages, there are errors like this: Mar 2 06:53:14 nocloud kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen Mar 2 06:53:14 nocloud kernel: ata1: irq_stat 0x00400040, connection status changed Mar 2 06:53:14 nocloud kernel: ata1: SError: { PHYRdyChg DevExch } Mar 2 06:53:14 nocloud kernel: ata1: hard resetting link Mar 2 06:53:20 nocloud kernel: ata1: link is slow to respond, please be patient (ready=0) Mar 2 06:53:21 nocloud kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 2 06:53:21 nocloud kernel: ata1.00: configured for UDMA/133 Mar 2 06:53:21 nocloud kernel: ata1: EH complete This happens fairly randomly throughout the day until eventually the filesystem becomes read-only. When this happens, my system becomes non-operational which kind of defeats the purpose of having a raid1. Note, ata1 is the bad disk (I think ata1 corresponds to /dev/sda because they are both first in line). Under mdadm, /dev/sda1,2 is no longer being used, but I can't prevent the system kernel from continuing to query that disk when I am no longer using it and throwing these errors. Is there a way to prevent my filesystem from automatically going into read-only mode? Furthermore, is it safe to do so? Thanks in advance. EDIT: Additional information: output from cat /proc/mdstat md1 : active raid1 sdb2[1] 976554876 blocks super 1.1 [2/1] [_U] bitmap: 5/8 pages [20KB], 65536KB chunk md0 : active raid1 sdb1[1] 204788 blocks super 1.0 [2/1] [_U] Output from mount: /dev/mapper/VolGroup-LogVol00 on / type ext4 (rw,noatime) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0") /dev/md0 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) EDIT2: pvdisplay output: --- Physical volume --- PV Name /dev/md1 VG Name VolGroup PV Size 931.32 GiB / not usable 2.87 MiB Allocatable yes (but full) PE Size 16.00 MiB Total PE 59604 Free PE 0 Allocated PE 59604

  Read the article

• What the hell was THAT?!?

  - by Massimo

  My system is Windows XP SP3, updated with the latest patches. The PC is connected to a Cisco 877 ADSL router, which does NAT from the internal network to its single static public IP address. There are no forwarded ports, and the router's management console can only be accessed from the inside. I was doing two things: working on a remote office machine via VPN and browsing some web pages on the Cisco web site. The remote network is absolutely safe (it's a lab network, four virtual servers, no publicly accessible services and no users at all; also, none of what I'm going to describe ever happened there). The Cisco web site... well, I suppose is quite safe, too. Suddenly, something happened. Strange popups appears anywhere; programs claiming they're "antimalware", "antispyware" et so on begins autoinstalling; fake Windows Update and Security Center icons pop up in the system tray. svchost.exe began crashing repeatedly. Then, finally, after some minutes of this... BSOD. And, upon rebooting, BSOD again. Even in safe mode. Ok, that was obviously some virus/trojan/whatever. I had to install a new copy of Windows on another partition to clean things up. I found strange executables, services and DLLs almost anywhere. Amongst the other things, user32.dll and ndis.sys had been replaced. A fake software called "Antimalware Doctor" had been installed. There were services with completely random names or even GUIDs (!), and also ones called "IpSect" and "Darkness". There were executable files without an .exe extension. There were even two boot-class drivers, which I'm quite sure are the ones that finally caused the system to crash. A true massacre. Ok, now the questions: What the hell was that?!? It was something more than a simple virus! How did it manage to attack my computer, as I am behind a firewall and was not doing anything even only potentially harmful on the web at the time?

  Read the article

• Making application behind reverse proxy aware of https

  - by akaIDIOT

  https in tomcat being the hassel it is, I've been trying to get an Axis2 webapp to work behind a reverse proxy for ages now, can't seem to get it to work. The proxying itself works like a charm, but the app fails to generate 'links' (or ports as it concerns SOAP) using https. It would seem I need some way to let Axis2 know it is being accessed through https, even though the actual transport to it is done over http (proxied from localhost). The nginx config that proxies https to localhost:8080: server { listen 443; server_name localhost; ssl on; ssl_certificate /path/to/.pem ssl_certificate_key /path/to/.key; ssl_session_timeout 5m; ssl_protocols SSLv3 TLSv1; ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv3:+EXP; ssl_prefer_server_ciphers on; location / { # force some http-headers (avoid confusing tomcat) proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto https; # pass requests to local tomcat server listening on default port 8080 proxy_pass http://localhost:8080; } } The proxy itself works fine, the info pages of the webapp work. The problem lies in the ports generated in the .wsdl: <wsdl:service name="WebService"> <wsdl:port name="WebServiceHttpSoap11Endpoint" binding="ns:WebServiceSoap11Binding"> <soap:address location="http://10.10.3.96/axis2/services/WebService.WebServiceHttpSoap11Endpoint/"/> </wsdl:port> <wsdl:port name="WebServiceHttpSoap12Endpoint" binding="ns:WebServiceSoap12Binding"> <soap12:address location="http://10.10.3.96/axis2/services/WebService.WebServiceHttpSoap12Endpoint/"/> </wsdl:port> <wsdl:port name="WebServiceHttpEndpoint" binding="ns:WebServiceHttpBinding"> <http:address location="http://10.10.3.96/axis2/services/WebService.WebServiceHttpEndpoint/"/> </wsdl:port> </wsdl:service> The Host header does its job; it shows 10.10.3.96 in stead of localhost, but as the snippet shows: it says http:// in front of it in stead of https://. My client app can't deal with this... Adding proxyPort and proxyName to the tomcat6 server.xml in the default <Connector> doesn't help; I'm at a loss on how to get this to work properly.

  Read the article

• Has the hardware in my modem gone bad?

  - by Tyler Scott

  I contacted CenturyLink about my modem recently and received useless and unrelated information. The problem seems to be that the modem will no longer save settings, the web interface is unusable except in internet explorer for some reason, and the modem keeps resetting. CenturyLink claimed it had to do with signal strength but I checked and it is currently between good and outstanding according to this. All of the lights remain green even when it starts acting up and I lose internet and shortly before it crashes and reboots. Does anyone have any idea what is going on or what I can do to fix it? (Asking CenturyLink again is obviously not going to help.) Update 1: Accessing the syslog from the web interface causes a crash. After it reboots, the log looks like as follows: 01/01/1970 12:01:29 AM Ethernet Ethernet client connected ,ip(192.168.0.2), mac(1c:6f:65:4c:6d:3b) 01/01/1970 12:01:38 AM Wireless 802.11 client connected ,ip(192.168.0.18), mac(d0:df:c7:c2:73:ca) 01/01/1970 12:01:41 AM System Event Line 0: VDSL2 link up, Bearer 0, us=20128, ds=40127 01/01/1970 12:01:43 AM dhcp6s[2028] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 01/01/1970 12:01:50 AM dhcp6s[2469] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 01/01/1970 12:01:52 AM radvd[2306] poll error: Interrupted system call 01/01/1970 12:01:56 AM PPP Link PPP server detected. 01/01/1970 12:01:56 AM PPP Link PPP session established. 01/01/1970 12:01:56 AM PPP Link PPP LCP UP. 01/01/1970 12:01:56 AM System Event Received valid IP address from server. Connection UP. 06/05/2014 08:16:01 AM radvd[2511] poll error: Interrupted system call 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:04 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:04 AM dhcp6s[3236] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 06/05/2014 08:16:08 AM Wireless 802.11 client connected ,ip(192.168.0.7), mac(44:6d:57:c4:d7:08) I also get it to crash on various other pages. I am guessing the web server is unstable.

  Read the article

• 401 - Unauthorized On Server 2008 R2 IIS 7.5

  - by mxmissile

  I have a web application deployed to Server 2008 IIS 7.5 box. From remote it gives this error: 401 - Unauthorized: Access is denied due to invalid credentials. (remote = desktops on the same LAN) Have tried several remote clients using different browsers, all the same result. (IE, FF, and Chrome) Hitting the application from the desktop of the server itself works flawlessly. However I have not tried Firebug on the server desktop. I would assume it's still issuing a 401 status code yet returning the content anyway. See Update #2. The application is using Anonymous Authentication. The application is written in .NET 4.0 Asp.Net using the MVC framework. Static content works fine, example: http://server.com/content/image.jpg Sysinternals procmon returns these 2 results for each request: FAST IO DISALLOWED and PATH NOT FOUND. I have 2 other MVC apps running fine on the same server. I have checked the security on the folders and they all match. App runs fine on a Server 2008 IIS 7.0 box. Nothing shows up in the Event log on the server related to this. Pulling my hair out here, any troubleshooting tips? UPDATE #1: This just get's more WTF as I dig. If I click on the Application in IIS Manager - Error Pages - Edit Feature Settings select Detailed Errors, the app works remotely. Not leaving this on, so problem is not solved yet, its just more confusing. UPDATE #2: Using Firebug, I see that the Status is still 401 Unauthorized, but the Response is returning the application's correct HTML. UPDATE #3 Playing around with Failed Request Tracing, here is the WARNING Request Trace that is causing the 401: ModuleName ManagedPipelineHandler Notification 128 HttpStatus 401 HttpReason Unauthorized HttpSubStatus 0 ErrorCode 0 ConfigExceptionInfo Notification EXECUTE_REQUEST_HANDLER ErrorCode The operation completed successfully. (0x0) Update #4 Regular IIS log is showing this: #Software: Microsoft Internet Information Services 7.5 #Version: 1.0 #Date: 2010-07-20 19:17:22 #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status time-taken 2010-07-20 19:17:22 10.10.1.10 GET /Purchasing/Home - 80 - 10.10.1.12 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US;+rv:1.9.2.6)+Gecko/20100625+Firefox/3.6.6 401 0 0 4414

  Read the article

< Previous Page | 425 426 427 428 429 430 431 432 433 434 435 436  | Next Page >