Search Results

Search found 15913 results on 637 pages for 'screen'.

Page 430/637 | < Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >

• Why would my mouse pointer be jerky when it can't get a signal from my router?

  - by izb

  I've got a fairly new PC but when moving the mouse across the screen, the pointer jerks as if the PC is freezing momentarily every second or so. Strangely, this only seems to happen if the signal from the wifi router is bad. If I move the PC closer to the router to get a full signal, it's fine. It also seems to affect the keyboard; Opening notepad and holding down a key shows the same momentary freezes. -- Update: It's a logitech wireless mouse, and a wired USB logitech keyboard.

  Read the article

• 13.10 doesn't boot on Vaio Pro 13

  - by vaioonbuntu

  I just installed Ubuntu 13.10 on my new Vaio Pro 13, disabled safe mode, but used UEFI and not legacy mode. I did an encrypted LVM installation and erased the complete SSD. It booted just fine from USB, but after installation it doesn't boot. The Vaio failed boot screen appears. I then tried this advice here: 13.10 on vaio pro with UEFI sadly it fails for me with "/usr/sbin/grub-probe: error: failed to get canonical path of /cow." I then tried mounted the encrypted partition with Nautilus and tried this: Cannot update grub with paramters on live USB With /dev/sda2 and then to install GRUB to /dev/sda. Didn't succeed and warned me that the "GPT partition label contains no BIOS Boot Partition; embedding won't be possible" What do i have to do, go fix GRUB and be able to boot my finished install? Here's my Boot Repair Log: http://paste.ubuntu.com/6386598/ I would really appreciate any help, I'm so happy to finally be able to ditch my big fat Macbook Pro and use Ubuntu on my new, light Vaio Pro, if only I could fix GRUB. best, x

  Read the article

• Refining an AutoHotkey script

  - by roy2012

  The purpose of this script is: The first two rows of hotkeys always effective. The remaining hotkeys work at NO TEXT INPUT Status only. In other words, when the small vertical lines are flashing anywhere on the screen and waiting for input text / digital, press zxasq, the effect is equal to the normal original letters. How can I do that? Rwin::^space AppsKey::^w CapsLock::MButton z::PgUp x::PgDn *a up::send {shift up}{ctrl up}{LButton up} *a:: GetKeyState, LButtonState, LButton ; if LButtonState = U ; send {shift down}{ctrl down}{LButton down} ; return *s up::send {shift up}{ctrl up}{RButton up} *s:: GetKeyState, RButtonState, RButton ; if RButtonState = U ; send {shift down}{ctrl down}{RButton down} ; return *q up::send {shift up}{ctrl up}{MButton up} *q:: GetKeyState, MButtonState, MButton ; if MButtonState = U ; send {shift down}{ctrl down}{MButton down} ; return

  Read the article

• Network connectivity issues with Windows Store

  - by Duy Tran

  I have my Windows 8 Pro build 9200 installed on my Dell laptop. I want to install some new apps and updates from the Store but there might be some network problem that caused the downloading gauge showing up but not really running at all. I followed some instructions that switched from local user to my Microsoft account, but this "Please wait" screen keeps showing and I don't really know why. I still have internet access and can use some apps like People, Mail, etc. with my account logged in, I can surf the net using Firefox, Chrome and Internet Explorer. I did another test using cmd with ping -t google.com and it showed that my laptop has internet access. Anybody knows a solution to make the Store working properly? Or is there any workaround to switch to the Microsoft account instead of a local user account?

  Read the article

• Windows 7 unresponsive after hibernate.

  - by Simon Verbeke

  The last few days, when I get Windows out of hibernate, Windows itself gets unresponsive. I can use any of my programs that were already opened before hibernating, but the window functions (closing, changing the size etc) aren't reacting. I can't open any new programs, except for the Task Manager. Also, I don't get an Internet connection. When I use Ctrl + Alt + Del, I get either a black screen, or the regular background. Then it hangs and after a while shows me a message that Windows failed starting up that "thing"(don't know what it's called in English, something with safety, etc). I have Windows 7 Ultimate installed.

  Read the article

• Massive Xubuntu desktop malfunction

  - by viktiglemma

  I'm using Xubuntu 11.04. Before everything worked fine, but when booting today the following happened: 1) Window focus does not leave the first-opened program. This means that if I keep Firefox open, and open a terminal, window focus will never be transferred to the terminal. (EDIT: if I open a terminal first, and then open Firefox, Firefox steals focus) 2) Window menus have disappeared. The maximize, minimize, etc., buttons and menu are gone. 3) In Xfce Settings Manager, the "Window Manager" settings window is empty. There is just a gray screen there, so I cannot modify any window settings. 4) The keyboard shortcuts I had previously defined using the Settings Manager do no longer work. Further, ALT-TAB no longer works for cycling between windows. 5) The mouse pointer does not show when I first log in. I have to log out and log in again (with an invisible pointer) before the mouse shows itself. EDIT: 6) I cannot resize or move the Thunderbird window, but I can move the Firefox window What can I do to troubleshoot this?

  Read the article

• Setting up JDK 7 for IntelliJ on the Mac

  - by Fergal

  I installed the JDK by downloading the dmg from the Oracle website here: http://www.oracle.com/technetwork/java/javase/downloads/jdk7u9-downloads-1859576.html After installation I tried to setup the JDK in IntelliJ but when I set the location to the JDK in the Project Structure-SDKs screen, only a few libraries were loaded and many (including all libraries from Content/Classes/) were missing. How can I add all of the necessary libraries libraries? The install location for the JDK is /Library/Java/JavaVirtualMachines/jdk1.7.0_07.jdk/Contents/Home I've tried looking in /System/Library/Frameworks/JavaVM.framework/Versions/ to no avail.

  Read the article

• Computers "applying computer settings" for a long time on start-up...why?

  - by tombull89

  Hello. Might be a bit of a slong shot but I'm stumped, along with the ICT Manager for the school I'm working it. In one of the IT rooms when you switch a computer on it will boot through BIOS fine, but when it gets to "applying computer settings" it can hang for a long time (~15 minutes). If you unplug the computer from the network it starts up fine, gets to the login screen, then you can plug the network cable in and it will work fine. I don't think it's anything to do with the fact we've been coming close to running out of IP addresses or a problem with our DHCP. Microsoft KB says apply the latest service pack, which we've done, and check a service. Servers and domian controllers are S2003, Computers and Desktops are XP. Does anybody have any thoughts on what to try?

  Read the article

• Red Samurai Performance Audit Tool – OOW 2013 release (v 1.1)

  - by JuergenKress

  We are running our Red Samurai Performance Audit tool and monitoring ADF performance in various projects already for about one year and the half. It helps us a lot to understand ADF performance bottlenecks and tune slow ADF BC View Objects or optimise large ADF BC fetches from DB. There is special update implemented for OOW'13 - advanced ADF BC statistics are collected directly from your application ADF BC runtime and later displayed as graphical information in the dashboard. I will be attending OOW'13 in San Francisco, feel free to stop me and ask about this tool - I will be happy to give it away and explain how to use it in your project. Original audit screen with ADF BC performance issues, this is part of our Audit console application: Audit console v1.1 is improved with one more tab - Statistics. This tab displays all SQL Selects statements produced by ADF BC over time, logged users, AM access load distribution and number of AM activations along with user sessions. Available graphs: Daily Queries  - total number of SQL selects per day Hourly Queries - Last 48 Hours Logged Users - total number of user sessions per day SQL Selects per Application Module - workload per Application Module Number of Activations and User sessions - last 48 hours - displays stress load Read the complete article here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Red Samurai,ADF performance,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Jittery Movement, Uncontrollably Rotating + Front of Sprite?

  - by Vipar

  So I've been looking around to try and figure out how I make my sprite face my mouse. So far the sprite moves to where my mouse is by some vector math. Now I'd like it to rotate and face the mouse as it moves. From what I've found this calculation seems to be what keeps reappearing: Sprite Rotation = Atan2(Direction Vectors Y Position, Direction Vectors X Position) I express it like so: sp.Rotation = (float)Math.Atan2(directionV.Y, directionV.X); If I just go with the above, the sprite seems to jitter left and right ever so slightly but never rotate out of that position. Seeing as Atan2 returns the rotation in radians I found another piece of calculation to add to the above which turns it into degrees: sp.Rotation = (float)Math.Atan2(directionV.Y, directionV.X) * 180 / PI; Now the sprite rotates. Problem is that it spins uncontrollably the closer it comes to the mouse. One of the problems with the above calculation is that it assumes that +y goes up rather than down on the screen. As I recorded in these two videos, the first part is the slightly jittery movement (A lot more visible when not recording) and then with the added rotation: Jittery Movement So my questions are: How do I fix that weird Jittery movement when the sprite stands still? Some have suggested to make some kind of "snap" where I set the position of the sprite directly to the mouse position when it's really close. But no matter what I do the snapping is noticeable. How do I make the sprite stop spinning uncontrollably? Is it possible to simply define the front of the sprite and use that to make it "face" the right way?

  Read the article

• How do i get Safari to ignore the SSL Certificate error?

  - by Tangopop

  In IE 6, 7, 8 and Firefox 3.6.3 and 3.0.5 i have installed a local SSL Certificate on the machine i am testing on and i have gotten the browser to igonre the SSL error (which is off one of my Web Test servers) Now i am tryin to do the same thing within safari 4 and with no luck. Basically i am running some automated scripts to test my website before they go live and i need to be able to ignore these errors as they will all run autonomosly. This is the error screen i am trying to avoid: http://library.bowdoin.edu/news/images/ezproxy-err/safari.jpg As i say i have installed the certificate locally and the IE 7 browser on the same machine works fine.

  Read the article

• Changing ati graphics setting into a batch file

  - by FrozenKing

  I want to change my saturation level to zero and again to default but I can do it manually by going to ati catalyst center. Since, I want to do it regularly I need some batch file code or program to alter this settings in a click or using shortcut keys. The reason I am doing this because I want to change my screen to black and white from color since b/w will make my eyes less tired then a colored display. I came to know about this saturation from my previously asked question : Changing display color from B/W to color (vice-versa)using a program.

  Read the article

• Monitor turns off about 1 second after turning it on

  - by r0ca

  Hi all! I have a hardware issue with some of the LCD monitors we have in our office. My problems is not related to video cards or anything else with the computer itself. I have 2 Dell 17" LCD screens that goes off (blank) after 1 or 2 seconds. The light remains green so it's not idling or sleeping. Just this morning, I had to replace one that goes off on 2 workstations and also on my laptop. Nothing to do with it. I tried the VGA and DVI connection w/out luck. I strongly think that this is something with a capacitor or something inside the screen but I can't figure out what it is... Is anybody heard of that kind of issue before? Regards, David.

  Read the article

• Shortcut Keys for external monitor with XP

  - by Rhys

  Last night my laptop (samsung nc20 running XP) fell off the table and the screen cracked leaving me unable to see anything. I have arranged for a it to be repaired but want to make a back up of several folders before it gets sent away. I was planning to use my parents LG LCD tv as an external monitor so I can see what I am doing when copying things to but after plugging it in nothing seems to happen (works instantly on another laptop running vista) and hotkeys seem to be of no use at all. Does anyone know the series of shortcut keys I will need to do to get XP to use an external monitor? Thanks in advance

  Read the article

• Install wireless router with cable modem - need authentication server?

  - by Paul

  I've bought a wireless router which I'm installing with a Telstra BigPond cable modem for a friend. As part of the setup I've got to a screen requesting username / password / authentication server for the cable modem They have contacted Telstra who supply the username / password and say that is all they need. They dont know anything about an authentication server. There are a couple of answers up on Whirlpool forum found through google but those answers are 4 years old. http://forums.whirlpool.net.au/forum-replies-archive.cfm/475258.html http://forums.whirlpool.net.au/forum-replies-archive.cfm/479615.html I havent tried them yet as I hoped to get actual answers before trundling over to my friends house again. Can anyone suggest, How to get information from Telstra support? (I realise this question maybe impossible to answer) What is the authentication server for Telstra BigPond for a user in Sydney Australia Are those whirlpool forum answers still valid? I guess if I dont get anything more here I'll try what it says on whirlpool and see what happens.

  Read the article

• Alternative to the tee command whitout STDOUT

  - by aef

  I'm using | sudo tee FILENAME to be able to write or append to a file for which superuser permissions are required quite often. Although I understand why it is helpful in some situation, that tee also sends its input to STDOUT again, I never ever actually used that part of tee for anything useful. In most situations, this feature only causes my screen to be filled with unwanted jitter, if I don't go the extra step and manually silence it with tee 1> /dev/null. My question: Is there is a command arround, which does exactly the same thing as tee, but does by default not output anything to STDOUT?

  Read the article

• Remote Desktop fails with no error

  - by Duane

  Recently, I've been having problems connecting to a remote machine via RDP. I can connect fine exactly once, but all subsequent attempts fail until the remote machine is rebooted. I seem to authenticate properly, but the RDP logon dialog disappears after showing, "Configuring remote session..." for a few seconds. No errors or other useful info is written either to my screen or the Event Logs of the two machines involved. I've tried disabling remote sound as others have suggested, with no success. I'm still investigating a solution, but would appreciate any thoughts. Fortunately, I can reboot the box remotely w/o causing any problems, but this is a less than ideal workaround.

  Read the article

• ATI Radeon Drivers works with which linux distribution and version?

  - by amit.codename13

  I have ATI Mobility Radeon HD 5850 graphics card. Almost every new linux distribution seems to have an issue with it, when i install the drivers. Working without utilizing the graphics card leaves me so unproductive. So i made a plan to use older versions of linux, any distribution suitable as a desktop distribution. UPDATE: The kind of problems that i am facing are, 1) After installing drivers the system boots and hangs, 2) There are unusual lines over the screen 3) After upgrade system doesn't start properly(hangs the usual old way) The kind of answers i am looking for is, distribution X(the newer the version the better) doesn't have the above problem after installing drivers for ATI Mobility Radeon HD 5850 graphics card. UPDATE: The new drivers released by AMD seems to fix all the issues, although they are still beta Thanks

  Read the article

• Slideshow screensaver in Win-7 vs. XP

  - by daveh551

  Since I skipped Vista, this may be an old question, I don't know. In XP, the built-in SlideShow (Photos) screensaver would randomly rotate among images not just in the directory specified in the settings, but also in any sub-directories (and on down) of that directory. When I use the Photos screensaver in Win-7, it seems to use only images in the directory I specify, ignoring the rest of the tree below that. Is there a way to get the XP behavior? Alternatively, is there some other public domain/open source Screen Saver with that or similar behavior that I can install?

  Read the article

• Ubuntu 12.04 using b43-fwcutter

  - by Nathan

  I have used 10.04 with the b43-fwcutter driver to drive my BCM4318 Broadcom card (a Linksys WPC54G v3) on my old Dell Inspiron 8100 for two years+ with no troubles. I just upgraded to 12.04 and although everything worked fine after install, before I added the b43-fwcutter driver, once I installed the driver, the system refuses to boot. Even before I install the Linksys card!! It just hangs on boot with graphical garbage on the screen. I tried several attempts to recover the system using the live CD, and finally reinstalled completely. I have been thru the cycle, install fresh system, verify everything works, then install b43-fwcutter and it is hung, several times. Consistent hard fail. The system runs fine on hardwire Ethernet, and wireless was fine on 10.04. But I cannot get there with 12.04. So after several attempts, I am now ready to admit defeat and ask for help. I have read every thread that search turned up, and either the advice is to do what I did, i.e. install fwcutter, or does not apply (Different Broadcom, STA, legacy, whatever) So what do I need to do to fix it? Or is the B43-fwcutter driver broken for 12.04? Thoughts? Tips? Log files needed??

  Read the article

• Updating sprite location with controls

  - by iQue

  So ive got a character in a 2D game using surfaceView that I want to be able to move using a button(eventually a joystick), but my game crashes as soon as I try to move my sprite. This is my onTouch-method for my steering button: public void handleActionDown(int eventX, int eventY) { if (eventX >= (x - bitmap.getWidth() / 2) && (eventX <= (x + bitmap.getWidth()/2))) { if (eventY >= (y - bitmap.getHeight() / 2) && (y <= (y + bitmap.getHeight() / 2))) { setTouched(true); } else { setTouched(false); } } else { setTouched(false); } and if I try to put this in my update-method: public void update() { x += (speed.getXv() * speed.getxDirection()); y += (speed.getYv() * speed.getyDirection()); } the sprite moves on its own just fine, but as soon as I add: public void update() { if(steering.isTouched()){ x += (speed.getXv() * speed.getxDirection()); y += (speed.getYv() * speed.getyDirection()); } the game crashes. Does any1 know why this is or how to fix it? I cannot figure it out. Im using MotionEvent.ACTION_DOWN to check if the user if pressing the screen. }

  Read the article

• Simple multi-seat

  - by Oli

  I've asked about multiseat before. The answer (for 10.04) involved doing it the proper way (eg through gdm, multiple server layouts). The problem was that gdm needs to be patched or reverted to 2.20 for multiseat. It's an ugly hack that, worse than anything, will hold up future updates. As a result, I didn't do anything. I still have a spare video card. I still have the monitor, keyboard and mouse all sitting waiting to jump into action. And I still want to be able to turn that into a simple desktop. My needs don't seem complicated. I have a second video card, a USB hub and anything connected to that USB hub that I want to be dedicated to another X server. I don't need a login screen (I'm happy hard-coding in a auto-login and I'd be happy with the user starting the X server if that's possible). This is so simple in my head that I only need two questions: How can I explicitly start an X server from the command line on an unused video adapter (by passing it whatever configuration I need to)? Can I have this new X session load a desktop environment on load? This seems like something you should be able to write in a little upstart script within 10 minutes. That would be perfect for me as then I'd have a nice start/stop control over the secondary desktop from the main desktop (that I want to leave unscathed!) I'm thinking something as simple as this for the payload: su -u other_user -c "startx -- localhost hardware-information" And use .xinitrc to load openbox or something...

  Read the article

• Could today's windows update have caused boot problems?

  - by gjvdkamp

  I have a 64 bit box that is dual boot Windows 7 64bit and Ubuntu. I booted into windows today and saw the 'updates ready' sign on the shutdown button so I clicked to let it install. It took a while to install 2 updates. Then I rebooted but now it doesn't get past the motherboard splash screen. So I don't even get the disks found messages or let alone the prompt to choose windows or Linux. Cold this be caused by the updates? Seems weird for a windows patch to have consequences beyond the windows os, but it seems unlikely to be a coincidence Thanks, Gert-jan

  Read the article

• New entries on the GRUB

  - by Kiewic

  Hello. I updated my Ubuntu, and after that there were two new lines on my GRUB screen. Ubuntu 9.04, kernel 2.6.28-16-generic Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode) Ubuntu 9.04, kernel 2.6.28-11-generic Ubuntu 9.04, kernel 2.6.28-11-generic (recovey mode) Ubuntu 9.04, memtest86+ Other operating systems: Microsoft Windows XP Home Edition Do I have two kernels installed? Do the old entries are still useful? Each kernel takes up space? :P And that's not all, when a get into the old version of Ubuntu, the wireless card stops working on any Ubuntu version until I get into Windows and then go back to Ubuntu. Thanks for your help.

  Read the article

• Collision checking problem on a Tiled map

  - by nosferat

  I'm working on a pacman styled dungeon crawler, using the free oryx sprites. I've created the map using Tiled, separating the floor, walls and treasure in three different layers. After importing the map in libGDX, it renders fine. I also added the player character, for now it just moves into one direction, the player cannot control it yet. I wanted to add collision and I was planning to do this by checking if the player's new position is on a wall tile. Therefore as you can see in the following code snippet, I get the tile type of the appropriate tile and if it is not zero (since on that layer there is nothing except the wall tile) it is a collision and the player cannot move further: final Vector2 newPos = charController.move(warrior.getX(), warrior.getY()); if(!collided(newPos)) { warrior.setPosition(newPos.x, newPos.y); warrior.flip(charController.flipX(), charController.flipY()); } [..] private boolean collided(Vector2 newPos) { int row = (int) Math.floor((newPos.x / 32)); int col = (int) Math.floor((newPos.y / 32)); int tileType = tiledMap.layers.get(1).tiles[row][col]; if (tileType == 0) { return false; } return true; } The character only moves one tile with this code: If I reduce the col value by two it two more tiles. I think the problem will be around indexing, but I'm totally confused because the zero in the coordinate system of libGDX is in the bottom left corner of the screen, and I don't know the tiles array's indexing is similair or not. The size of the map is 19x21 tiles and looks like the following (the starting position of the player is marked with blue:

  Read the article

< Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >