Search Results

Search found 18892 results on 756 pages for 'display'.

Page 432/756 | < Previous Page | 428 429 430 431 432 433 434 435 436 437 438 439  | Next Page >

• Why won't my graphics work in Ubuntu 12.04 LTS?

  - by user170974

  I'm very new to Ubuntu and to Linux in general, and took the leap and formatted my PC to Ubuntu 12.04 LTS very recently :) I seem to be having some trouble getting my graphics card to run properly, I looked over what information I could find but I still cannot get it up and running and figured this was a good place to ask for help. The information I can find on my graphics is as follows: (Terminal command) lspci outputs: 01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250] 02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M] I tried using a mixture of the following links: How do I fix my installation of ATI Catalyst Video Driver in 12.04 LTS? What is the correct way to install ATI Catalyst Video Drivers (fglrx)? Ubuntu Precise Installation Guide But it does not seem to work, since running fglrxinfo in terminal gives: display: :0.0 screen: 0 OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x301) OpenGL version string: 1.4 (2.1 Mesa 9.0.3) What am I doing wrong here? All help appreciated ;) Edit: I have tried the legacy driver from www2.ati.com/drivers/linux/amd-driver-installer-catalyst-13-4-linux-x86.x86_64.zip I also tried the guide at https://launchpad.net/~makson96/+archive/fglrx which caused the system to crash (blackscreen, no boot) Neither seemed to work. I did however reinstall ubuntu 12.04 LTS, and re-tried both with no success. Reintalling ubuntu did however fix the broken dependencies problems, etc.

  Read the article

• Nvidia GeForce Gt-520M-cn on intel dh61ww Ubuntu 12.04

  - by j goseeped

  hi people i hope you can help a little bit , i appreciate your time look: i have a this desktop i7 2600, 8gb ram ddr3, board intel dh61ww, Geforce Nvidia GT520-cn 2Gb ddr3, i just install ubuntu 64bits 12.04 kernel 3.2.0-23-generic , i want to setup two monitors samsung led 22" and get start mi video card 1) i download and installed nvidia driver 295.59 and also try with 302.17 to apt-update and upgrade, apt-get install build-essential linux-headers-$(uname -r), apt-get remove --purge nvidia*, apt-get remove --purge xserver-xorg-video-nouveau, vim /etc/modprobe.d/blacklist.conf blacklist vga16fb blacklist nouveau blacklist rivafb blacklist nvidiafb blacklist rivatv sh NVIDIA.run, sudo service lightdm start, reboot, nvidia-xorgconf 2)after reboot i get 800x600 and nvidia-settings say this. You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server. 3) i change a little bit xorg.conf to set up a resolution to work property 4) i dont have any image in the monito and i dont have any option on Nvidia X server settings lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 520] (rev a1) egrep -i 'glx|nvidia' /var/log/Xorg.0.log [ 12.005] (II) LoadModule: "glx" [ 12.005] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 12.575] (II) Module glx: vendor="NVIDIA Corporation" [ 12.585] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012 [ 12.585] (II) Loading extension GLX [ 13.037] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 13.044] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10) [ 13.044] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9) glxinfo | grep direct Xlib: extension "GLX" missing on display ":0.0". Error: couldn't find RGB GLX visual or fbconfig sorry my english is no very well. and thanks guys

  Read the article

• ubuntu 12.04 LTS hangs on boot when external monitor is connected

  - by vladeta

  I have a problem with my fresh installed Ubuntu 12.04 LTS on my Dell M4600: nVidia quadro 2000M i7-2860 16GB ram 128GB SSD Dell/Samsung 750GB HDD IPS RGB laptop display When it is connected via DP++ to the external Dell U2311H monitor, it hangs on boot or when wakening from suspend. If I detach the DP cable it boots normally. I have tried all combinations that I have found, as adding to grub: "no splash", "boot=pci", "acpi=off", etc... I have also changed in nVidia X settings that external monitor is the primary one and also tried to delete monitor.xml file. There is no change it hangs each time after grub. It starts to load daemons then both screens are blank and then completely hangs with beep sound. What I discovered is if I detach the cable and wait for about 2 sec after grub starts booting and then physically connect DP cable while the Ubuntu is still booting everything works normally and I have a picture on my external screen while the laptop screen is off, just as I wanted. Do you maybe know how to solve this issue? Thank You.

  Read the article

• how do I fix ati driver issue

  - by Michael

  I have little knowledge about ubuntu, but I am learning. Recently, my ubuntu 12.04 required that I update. I noticed that it was updating xorg and other things, after the update I was asked to reboot. I did. now when I start that computer up, it cannot detect any display and refuses to boot from usb. I have no idea how to recover my computer. It simply starts in what is akin to the terminal program and ask for my username and password. After that, I can enter commands. The problem may be because I manually installed drivers by copy pasting from some instructional that I now have no idea where they are, but what it amounts to is that I "built" the drivers. They were working GREAT until this update. I did this because otherwise I was unable to have sound through my hdmi. After I hand built the drivers, they worked great. After this update Ka-blam! nothing... Also, I had okay-ed lots of update sources (though all of them [xorg and such] were the stable versions, not the unstable update sources) Please help and thank you in advance. (if this is posted incorrectly or misplace, please let me know what to do)

  Read the article

• How to prevent Network Manager from auto creating network connection profiles with "available to everyone" by default

  - by airtonix

  We have several laptops at work which use Ubuntu 11.10 64bit. I have our Wifi Access Point requiring WPA2-EAP Authentication (backed by a LDAP server). I have the staff using these laptops when doing presentations by using the Guest Account. So by default when you have a wifi card, network manager will display available Wireless Access Points. So the logical course of action for a Novice(tm) user is to single left click the easy to use option in the Network Manager drop down list... At this point the Staff Member (who is logged in with the guest account) expects to just be able to connect and enter any authentication details if required. But because they are using the Guest account, they won't ever have admin permissions (nor do I want them to), and so PolKit kicks in with a request for admin authorisation. I solved this part by modifying the PolKit permissions required to allow all users to create System Network Connections... However, because these Staff members are logging onto the Wifi Access Point with Ldap Credentials and because the Network Manager is now saving those credentials as a System Connection, their password is available for the next guest user session (because system connection profiles are stored in /etc/NetworkManager/system-connections.d/* ). It creates system connections by default because "Available to all users" is ticked by default when you quickly connect to a new wifi access point. I want Network Manager to not tick this by default. This way I can revert the changes I made to Polkit and users network connection profiles will be purged when they log out.

  Read the article

• What's a good tool for checking from my own machine that my server is up?

  - by chico

  I'm looking for a good tool (web site or not) that I can use to do a simple check whether my web server is accessible from outside LAN (it's serving in a non-standard port). To give some context, I've gone through this problem: can't access my ip from outside. Even the tools I've found are not really working. Currently to fetch the html I serve with the online bash tool I do: curl <my ip>:<my port> \ | sed 's/&/\&amp;/g; s/</\&lt;/g; s/>/\&gt;/g; s/"/\&quot;/g; s/'"'"'/\&#39;/g' I'm looking for a simple tool that can display the html properly, or just show raw text without resorting to sed html escaping and curl.

  Read the article

• Changing size of window when testing Adobe AIR mobile applications

  - by Peter

  Im making a mobile phone Android application in Flash CS 5.5. I set the width/height of the stage to 480/800 px. When I hit CTRL+ENTER to test run the application I get a window that is 480/800 px. It cannot be resized. I want to change the size of that window WITHOUT changing the stage width/height. For example if I run the APK on a mobile phone with a 1000x1000 display the flash will scale automatically to fit the 480/800 stage to the 1000x1000 screen. So it should be possible to change the window size to 1000x1000 without having to change the stage width/height. But how?

  Read the article

• What is a good web interface for remote linux load monitoring?

  - by Jakobud

  I'm looking for some type of remote linux monitoring software that you can view using a web interface. And I'm not just looking for the basic load information. I'm also looking for process information, similar to the info that you get from TOP. Like I'd just like to be able to pop open this webpage to view whats going on with the server at a moments notice. For example, perhaps just a basic PHP page that is on the server that uses basic AJAX to display and refresh results from the TOP command in the page. I was thinking about writing something like this, but I don't want to reinvent the wheel.

  Read the article

• Firefox- How to change font size of items in bookmarks sidebar

  - by TheClamkinator

  In Windows. (I know I can open Desktop > Properties > Appearance > Advanced [and figure out which item determines it; probably Menu]. But, I don't want other things changed - just the bookmarks. This is because I have so many and I want more of them to display. I did see the question on changing font size of items in folder, on bookmarks toolbar, and sub-folders, etc; But, I'm talking sidebar on firefox, I don't have Google Chrome and I am not a developer.

  Read the article

• Is there a log showing why a Windows server did not restart SQL Server after a reboot?

  - by MerlinMags

  Our server was rebooted after a Windows Update scheduled for 1am, but after the restart SQL Server did not start up, so our websites were unable to display. Usually this process happens with no manual intervention. Is there a log somewhere which might indicate the reason why the Windows startup process did not call SQL Server to get going again? I've looked in the Event Viewer (Application Log) and SQL's own file E:\MSSQL\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG* but these only contain records of successful startup operations....nothing mentions a failed attempt to start a service or anything like that.

  Read the article

• Installed IE8 & SP3 on XP now I can't HTTPS from any browser

  - by Kevin

  The computer is Windows XP Professional SP3 with IE8. On the Tools Options Connections the "Settings" is GRAYED OUT (I am an admin on the machine) Any browsing of https:// addresses results in IE displaying the following: "this program cannot display the web page" After installing an alternate browser and trying the same https:// address I get a similar error message. I have tried using Compatibility View Settings to for all web pages and this has no effect on the problem. HTTP addresses work fine, I can PING sites such as google.com without issue. Question: What could be preventing me from getting at the settings to check to see if I'm using a proxy? What else could be preventing HTTPS access?

  Read the article

• Best practice to create an ftp administrator account on vsftpd

  - by jtd

  Background: My manager would like me to create an administration account for out FTP server. When logged in via ftp, it should instantly display all of the home directories of the users, and be able to modify any directory or file in any way possible. What would be the best way to go about this? I planned on chrooting this ftp admin to /home, but I don't know how to properly go about the permissions. Maybe make a group called ftp_admins, and chgrp the /home folder? But then wouldn't it affect the users accessing their folders? any help is appreciated.

  Read the article

• Lenovo tools for windows 7: can't re-enable wireless

  - by pcampbell

  Consider a netbook - Lenovo S10e with Windows 7 and the S10 Lenovo power management tools. Machine has factory BIOS. Fn+F5 is the key combo to toggle the wireless radio on/off. The tool allows the disabling fine; works as expected. The problem is that the re-enable doesn't work, or is confusing on how to re-enable. Previously tried without success: Fn-F5 Fn-Ctrl-F5 Fn-Shift-F5 Fn-Alt-F5 Here's the onscreen display: Question: How can you re-enable the wireless radio using the Function key on a Lenovo netbook?

  Read the article

• How do I make YouTube videos fill up an entire screen when using dual monitors?

  - by Jephir

  I am using a dual monitor setup on Ubuntu 9.10 using the TwinView configuration in NIVIDA X Server Settings. My total resolution is 2960x1050 pixels, and my individual monitors are 1680x1050 (primary) and 1280x1024 (secondary). When going into fullscreen mode on any video on YouTube, I only see a cropped version of the video on my primary display as seen below. This does not occur on any other video sharing website - they properly make the video to fill the entire screen on my primary monitor. To my knowledge this problem only happens on YouTube.

  Read the article

• How do I run vino-server without a monitor attached in Ubuntu 10.04

  - by Ole

  I just upgraded to Ubuntu 10.04 yesterday on a headless home server. I use the server for a variety of purposes, and what I don't know how to do via SSH I've alway been able to do through VNC. However, since the upgrade vino-server will no longer run if there isn't a monitor attached. Before it used to start up without a problem. Even by attempting to run the server via SSH gives me a "could not load display" error. Summary: I need to get vino-server running at boot time on a server with Ubuntu 10.04, without a monitor attached.

  Read the article

• Ubuntu server 11 showing weird characters on console

  - by andySF

  I've installed Ubuntu server 11 after my last hard drive failed to perform. The install process and GRUB screen are OK but I have a problem with the console. I attached two photos because it's difficult for me to describe this issue. I have little knowledge about Linux. My server is used for git, file server, print server. I played with this command dpkg-reconfigure console-setup but no effect. It's nothing physicality wrong with my display or my memory(it's on board). I have run a memtest, and besides that withe the previous version of Ubuntu I've had no problems. The problem.

  Read the article

• Installed IE8 & SP3 on XP now I can't HTTPS from any browser.

  - by Kevin

  The computer is Windows XP Professional SP3 with IE8. On the Tools Options Connections the "Settings" is GRAYED OUT (I am an admin on the machine) Any browsing of https:// addresses results in IE displaying the following: "this program cannot display the web page" After installing an alternate browser and trying the same https:// address I get a similar error message. I have tried using Compatibility View Settings to for all web pages and this has no effect on the problem. HTTP addresses work fine, I can PING sites such as google.com without issue. Question: What could be preventing me from getting at the settings to check to see if I'm using a proxy? What else could be preventing HTTPS access?

  Read the article

• Rendering a DOM across multiple displays

  - by meetamit

  I'm building a data-driven animation with HTML and javascript to run in a web browser. I would like to display it tiled across three 1080p monitors. This essentially yields a viewport that's 5760px wide and 1080px tall. Pretty large. Does anyone have experience setting up something like this? I have many questions below, but any tip would be appreciated: Is it reasonable to expect a DOM to render into such a large viewport size at close to 60fps? I might choose to use canvas, instead of SVG or HTML, but that would yield a giant canvas. Can a canvas with such high resolution be performant? Of course everything depends on the complexity of the graphics I want to render, but I'm looking to remove that factor from this question, so assume I'm asking about a canvas animation that can run at 60fps at 1920x1080 resolution. Would it run roughly as fast at 3 times the width? Would three.js and WebGL be a more proper approach at that resolution? How do you actually cause Chrome or FF to span 3 monitors at full screen? Do I need a 3rd party solution of any kind? Thanks!

  Read the article

• What is this video format, and how do I convert It

  - by OrangeRind

  Description I have a big (7.4G) .mkv file (1080p) which I want to convert to H.264 (using x264) Problem MediaCoder and GSpot are unable to detect the codec. They don't display anything. Just that the file is a matroska Container Video with a MIMEtype of video/x-matroska. No bitrate, profile etc. But the source tells me that is VC-1 encoded. Question So how do I encode this file. as in, using what encoding software, since MediaCoder has failed.

  Read the article

• Over-scan Issues when using HDTV through VGA

  - by RPG Master

  Right now all we can do is set the TV to 1280x768 instead of its native resolution of 1360x768. Setting it to its native resolution gives you a screen with a large portion of the left side of the screen cut off. We've tried everything with the TV so now we're turning to the innards of Ubuntu in hopes of fixing this. The computer is using an NVIDIA GeForce GT240. This is its current xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin # HorizSync 28.0 - 55.0 # VertRefresh 43.0 - 72.0 Identifier "Monitor0" VendorName "Unknown" ModelName "CRT-0" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 6600" EndSection Section "Screen" # Removed Option "metamodes" "1360x768 +0+0; 800x600 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1360x768 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Ubuntu 14.04 install fails with Via S3 UniChrome Pro graphics

  - by WizardNo.7

  I am trying to install Ubuntu 14.04 on a Fujitsu Siemens Amilo Pro laptop(it's quite old yes, has about 30GB Hard Drive and I think 192mb of RAM) which currently has Windows XP installed (which I'd like to keep for the time being). I have downloaded the 32-bit Desktop ISO and used unetbootin to create a Live USB for this laptop. When I boot from USB, I arrive at the unetbootin Grey and Blue menu and pick either "Try Ubuntu without installing", or "Install Ubuntu". The menu goes away and an Ubuntu loadscreen showing UBUNTU and four dots which progressively change between white and orange. At about the second color changing cycle a white underscore symbol appears next to the fourth dot and flickers. There is some leftover text from the kernel boot still visible, but there is no graphical desktop. After this I have to hard reboot or shut-down. $ lshw -c video *-display UNCLAIMED description: VGA compatible controller product: CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] Vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:01:00.0 version: 01 width: 32 bits clock: 66MHz capabilities: pm agp agp-2.0 vga_controller bus_master cap_list configuration: latency=64 mingnt=2 resources: memory:f0000000-f3ffffff memory:d1000000-d1ffffff

  Read the article

• VGA resolution with Sony Bravia TV

  - by prestomation

  I just bought Sony Bravia KDL40S5100 tv. The VGA input is acting weird. I have a Gateway desktop with Windows 7 and Intel 945 graphics. I also have a laptop running Ubuntu 9.04. The TV will not display the gateway when the resolution is over 1360x768, I have to wait for it to time out and bring me back. The Intel driver even urges me to switch to the "recommended" 1920x1080. I just installed Win7 using this tv as the monitor. When the orginial welcome screen started after setup, it started me at 1080. I had to start in safemode to set a res that would work! When I plug my laptop into the TV, 1920x1080 works just fine. Any ideas? This laptop also has Win7, which I am going to try, but I haven't gotten a chance yet.

  Read the article

• Excel chart: How to reverse the X axis of time series data

  - by JohnnyLambada

  In Excel 2003, I have a time series from a financial report that goes something like this: 2007 2006 2005 Amount 300 200 100 I want to create a graph of the time series that looks something like this (please excuse the ugly ascii graph): 300| .x | ... 200| .x.. | ... 100| x |____________________ 0 2005 2006 2007 But intead of getting an upward sloping graph, excel wants to put my time series in reverse (the way it actually appears in the spreadsheet). Is there any way to make excel display the x axis in reverse of the way it normally does? I've tried manually reversing the range in the chart dialog (changing a range of B1:D3 to D3:B1), but excel just puts it back.

  Read the article

• Excel 2010 started changing my numbers

  - by Going Crazy

  If I type in a 16 digit number (format: number, no decimals) it changes the number on me. Example: 1234567812345678 changes the view to 1234567812345670. If I type it in as a general format it changes the numbers above so it displays 1.23457E+15 but if you click on the cell, the display shows the last digit as a 0 instead of an 8 once again. I opened the file on a different computer and same issue now with it. I have changed the auto correcting and auto formating all to no avail. Help!

  Read the article

• Virtual Box - not filling entire screen

  - by jdavis

  I am new to VirtualBox and am trying to set up an instance of Windows 7 64. I have the virtual machine instance running with Windows 7 now installed, but it only fills up a small portion of my screen. Even when I go full screen, the window stays the same size and the rest of the screen is filled with gray space. I have installed VirtualBox Guest Additions, which allowed me to go from a resolution of 800x600 to 1024x768, but this still isn't satisfactory as my laptop display is 1600x900. Any help on this would be most appreciated. Thanks.

  Read the article

< Previous Page | 428 429 430 431 432 433 434 435 436 437 438 439  | Next Page >