Search Results

Search found 19969 results on 799 pages for 'nate bit'.

Page 433/799 | < Previous Page | 429 430 431 432 433 434 435 436 437 438 439 440  | Next Page >

• Problem with dual monitor

  - by Gernot

  I have a laptop with a nvidia optimus graka. I'm also useing a 23" external monitor. It never really worked... . After installation (it was a clean installation) the 23" monitor worked as it should, but the LCD from the laptop wasn't at the right resolution. And every time i tried to change this the PC crashed. Today i had a litle bit of time so i decided to solve this problem. I've tried a few things ( e.g. I've installed bumblebee with the nvidia driver and tested it. It's working...) but nothing solved my problem. Instead of getting any closer to the solution, it's gotten even more strange now... . Now, the display setting isn't recognizing a 2nd monitor at all. But I get on the 23" monitor (which is not shown in the display setting) a screen with the same resolution as the one on the laptop. The display settings looks so: Any help would be wonderful.

  Read the article

• b43 Firmware Error when trying to install Ubuuntu 14.04 on XP Laptop

  - by WizardNo.7

  I know I'm an Ubuntu and Linux n00b, but I've been browsing the web for a few days searching for a solution, and none of the other b43 posts etc solve my problem. I am trying to install Ubuntu 14.04 on a Fujitsu Siemens Amilo Pro laptop(It's quite old yes, has about 30GB Hard Drive and I think 192mb of RAM) which currently has Windows XP installed(which I'd like to keep for the time being). I have downloaded the 32-bit Desktop ISO and used unetbootin to create a Live USB for this laptop. When I boot from USB, I arrive at the unetbootin Grey and Blue menu and pick either "Try Ubuntu without installing", or "Install Ubuntu". The menu goes away and an Ubuntu loadscreen showing UBUNTU and four dots which progressively change between white and orange. At about the second color changing cycle a white underscore symbol appears next to the fourth dot and flickers, and then I get the usual: [ 95.514833] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 95.514847] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 95.514855] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all the instruction on this website. After this I have to hard reboot or shut-down. I don't have a previous Linux install so cannot do the apt-get from my previous install. I cannot access the boot options menu by using F6 or similar. Any ideas? Thanks beforehand!

  Read the article

• Safe to use high port numbers? (re: obscuring web services)

  - by sofakng

  I have a small home network and I'm trying to balance the need for security versus convenience. The safest way to secure internal web servers is to only connect using VPNs but this seems overkill to protect a DVRs remote web interface (for example). As a compromise, would it be better to use very large ports numbers? (eg. five digits up to 65531) I've read that port scanners typically only scan the first 10,000 ports so using very high port numbers is a bit more secure. Is this true? Are there better ways to protect web servers? (ie. web guis for applications)

  Read the article

• what do you use for storage discovery / storage management?

  - by lysdexic

  I am looking for some ideas on what would be the best way to discover and manage network storage. Discovery: Any good tools that will scan hosts and storage devices and report back their findings? Maybe using SNMP or WMI? Management: I'm currently looking at Storage Manager by Solar Winds, but it is a bit pricey. Any good open source projects like this? Just looking for ideas of how to get better visibility into the storage infrastructure on this network. It includes a HP Lefthand Iscsi san and EC VNX san. As well as individual hosts with local storage. Thanks for reading and thanks for any input.

  Read the article

• Amazon EC2 IPSEC

  - by John Qualis

  I have configured a ubuntu 12.04 64-bit server machine on Amazon AWS to act as a strongswan IPSEC server. I want to connect to it from my MAC OSX Lion's inbuilt IPSEC client. The OSX machine is in my home network. I log into the AWS machine using a ssh to ubuntu@public-ip and I provide the private RSA key in form of .pem file which I downloaded when the machine instance was created. The ssh connection works file but the IPSEC connection fails. What credentials/configurations should I provide for an IPSEC connection from my OSX client to AWS ubuntu server? My OSX machine is behind an ISP provided modem/router. Appreciate any help and thanks in advance

  Read the article

• Hide the ports in the url of a tomcat application

  - by S.M.09

  I have setup tomcat 6 on a server with several different instances which run on different ports For Eg: http://10.XXX.XXX.XXX:8080/myAPP1 http://10.XXX.XXX.XXX:8088/myAPP2 http://10.XXX.XXX.XXX:8082/myAPP3 and so on... These urls are available two the users using these and other applications Now I want to hide the ports on which each of the applications are running... So that the user could see only something like this http://10.XXX.XXX.XXX/myAPP1 http://10.XXX.XXX.XXX/myAPP2 http://10.XXX.XXX.XXX/myAPP3 What is needed to be done for this I have achieved this for one url (i.e. one port) using the firewall rules and redirect the request on HTTP 80 port to the port that tomcat is listening.. But I want such patter to appear for all the urls... How can I go about this? Specs HOST M/C : 64 bit OS: Linux Redhat Tomcat : 6.0

  Read the article

• What power cord does a WD16001032 hard drive use?

  - by llcf

  I have a Western Digital 160GB My Book USB external hard drive (WD16001032), but I can't find its power cord (or, at least, figure out which one it is in my box of cords). It might be that only one power cord would fit, but I'm a bit cautious since I just tried one of the cords with a router and could smell electronics burning when I used an incorrect one. What voltage/amps are needed for this drive? I can't find specs on Western Digital's site. I'm assuming this is due to it being an older drive.

  Read the article

• Web application access different between Domain Name and IP

  - by h82

  in our office, we have a web application running. When we access the application by the domain name, http://server.domain.com/application/name it will display the current version of application. However, when we go by the IP address, http://192.168.1.111/application/name it will display the old version of that application. One thing is that we can access that application either by http://server.domain.com/ (it will be redirected to the long URL automatically) or http://server.domain.com/application/name when we are using domain name. But only accessible via the exact URL when we use IP address. Why is it showing the old version and how can it be corrected? It is running JRun4, Apache on Red hat. I've checked in httpd.conf a bit but could not find any. Please advice what should be done to display the same (updated version) when we access using domain name or IP address. Thank you.

  Read the article

• Is Joerg Schilling’s “sdd” a full replacement for “dd”

  - by fishtoprecords

  I was directed to post here, I started on Stackoverflow.... I'm trying to use 'sdd' on my Debian system, and can't get one set of options to work. They do work in 'dd' so I am wondering if I am specifying them incorrectly, or if sdd didn't implement them, or something else. What I want to do is sdd if=/dev/hdh1 of=/bay5/imagebay1 bs=4096 conv=sync,noerror if I leave out the "conv=..." option, it works, or at least starts copying data. sdd if=/dev/hdh1 of=/bay5/imagebay1 bs=4096 Can you shed a bit of light?

  Read the article

• Starting Apache through XAMPP is not working

  - by nogamo

  I've checked the error logs for this particular problem and it seems no access can be made to port 80. (OS 10013)An attempt was made to access a socket in a way forbidden by its access permissions. : make_sock: could not bind to address [::]:80 Turning the Windows firewall off didn't work, so I'm a bit lost. All of this is running on my laptop so I don't have my own "server" per se but I was under the impression that this would work without the need for one independent of my own personal computer. How would I solve this?

  Read the article

• moving in the wrong direction

  - by Will

  Solution: To move a unit forward: forward = Quaternion(0,0,0,1) rotation.normalize() # ocassionally ... pos += ((rotation * forward) * rotation.conjugated()).xyz().normalized() * speed I think the trouble stemmed from how the Euclid math library was doing Quaternion*Vector3 multiplication, although I can't see it. I have a vec3 position, a quaternion for rotation and a speed. I compute the player position like this: rot *= Quaternion().rotate_euler(0.,roll_speed,pitch_speed) rot.normalize() pos += rot.conjugated() * Vector3(0.,0.,-speed) However, printing the pos to console, I can see that I only ever seem to travel on the x-axis. When I draw the scene using the rot quaternion to rotate my camera, it shows a proper orientation. What am I doing wrong? Here's an example: You start off with rotation being an identity quaternion: w=1,x=0,y=0,z=0 You move forward; the code correctly decrements the Z You then pitch right over to face the other way; if you spin only 175deg it'll go in right direction; you have to spin past 180deg. It doesn't matter which direction you spin in, up or down, though Your quaternion can then be something like: w=0.1,x=0.1,y=0,z=0 And moving forward, you actually move backward?! (I am using the euclid Python module, but its the same as every other conjulate) The code can be tried online at http://williame.github.com/ludum_dare_24_evolution/ The only key that adjusts the speed is W and S. The arrow keys only adjust the pitch/roll. At first you can fly ok, but after a bit of weaving around you end up getting sucked towards one of the sides. The code is https://github.com/williame/ludum_dare_24_evolution/blob/cbacf61a7159d2c83a2187af5f2015b2dde28687/tiny1web.py#L102

  Read the article

• sql server: losing identity column on export/import

  - by Y.G.J

  Recently I started dealing with SQL Server, my previous experience was in MS-Access. When I'm doing an import/export of a db, from the server to my computer or even in the server, all column with primary key loose the key. Identity is set to false and even bit is not set to the default. How can I can I use an import/export job to make an exact copy of the db and its data? I don't want to have to perform a backup and restore every time I want the same db somewhere else, for another project, etc. I have read about "edit mapping" and the checkbox but that did not helped with the identity specification... and what about the primary key of the tables and the rest of the things?

  Read the article

• Snapshot/Save GPU Drivers

  - by ashes999

  Since I'm running XP/32-bit, my GPU drivers are quite fragile. I've spent several hours trying to back up and restore from old versions, on at least two separate occasions. Writing down the device drivers is not enough. In the short term, I would like to somehow save, zip, backup, snapshot, or something so that if I need to reinstall my OS in the short-term, I have a reliable way to get the drivers. ATI's website doesn't have the install kit anymore, and I don't have it saved; I googled, but didn't find the exact same version. How can I backup/save my drivers so that I can reinstall them later?

  Read the article

• vmconvert exchange 2007

  - by user72950

  Has anyone tried to run vmconvert on a Windows 2008 64 bit server running Exchange 2007? Here is what I did. I stopped the Exchange processes and IIS and ran vmconvert. When I moved the new server to my vmware server 2.0 for windows and booted it. All seemed well except I could not send or receive email. All outbound was stuck in the queues. I was able to log in via OWA so that tells the network setup/NIC bindings were OK. Any ideas?

  Read the article

• WINAPI window management question

  - by gekod

  I'm learning to develop windows applications using WINAPI and plain C. Now I got a bit confused with all those handles and would like to ask if you guys could teach me some good practices to structure and handle controls and windows. Here's where I get confused: Using the IDs declared in the resources for each object, we can get their handles using GetDlgItem(). Now what if we don't know their parent, which is needed by this function. One example: We have the main window created at launch. Then we register two new window classes and create a window for each new class and we create a message function for each too. Now if inside one of the children windows I create a button and inside the other child window I create a text label. Now when we click the button inside of child window A the label in child window B shall be modified to whatever. The WM_COMMAND for the button is interpreted inside the message loop for child window A. Now what would be the best and more elegant way to access the text label inside the child window B? I am in the process of learning the WINAPI and just want to learn it right from the start instead of producing Hacked code that someday becomes unreadable and to later have to adapt to a new way of programing.

  Read the article

• xen 4.0 squeeze fails to start guests with: launch_vm: SETVCPUCONTEXT failed

  - by mcr

  As Chris Benninger says over at: http://www.benninger.ca/?p=58 lots and lots of people have the problem with Squeeze and xen4.0 telling them: launch_vm: SETVCPUCONTEXT failed (rc=-1) but nobody seems to know what the solution is. I don't know either, but at least here, a solution might get recorded. In my case, I can start one guest machine. An identical configuration for a second machine fails. Whichever one I start first, is the one that runs, the other gets the error. I've got at least a dozen other systems (at my work) running great with Squeeze and 64-bit XEN, but not this new machine at home.

  Read the article

• Restrict subversion to only allow certain functions

  - by Farseeker

  I'm in a bit of a situation. We have our private subversion server that we use for development, but one of our government clients is requesting access to our commit logs so that they can get an up-to-date picture of what we've been doing on the system. I don't have a problem with them reading our commit logs, but what I do have a problem with is them having access to our source code - they can't have read or write. The obvious solution is to do an svn log ourselves and give them an export, but they want direct SVN access as they apparently have an auditing solution that will import the svn log command automagically. So, is there a way I can set up access to a subversion repo and deny them access to everything except svn log? I don't care if I have to set up a virtualhost just for this, but it has to be done over http(s). We're also using LDAP for authentication if that makes any difference.

  Read the article

• Does searching a keyword on Google make the crawlers look harder in the future?

  - by Foo Bar

  Do the search requests made by the users influence the Google crawlers "attraction" by this keyword? Let's say Google has some hits on a specific keyword in the search index. And now I search for exactly this keyword. Will the Google crawlers react to the search and keep looking more intense for pages that could match this keyword? A reason why this could be important: Privacy when searching yourself. Assume you just want to know how much Google (and thus other people) can find out about you. If now any (statistical) additional search for your name trigger the crawlers even one step harder to find even more about you, it would have the negative effect that you would actually be found easier in the future, even though you had the intention and hope to find out how few Google finds about you. It's a bit like the dillema in quantum mechanis: Does observing the system automatically change the system?

  Read the article

• Does it make a difference to read from a file instead of from MySQL?

  - by Joe Huang

  My web server currently is quite loaded. And I have a PHP file that is accessed very often remotely. The PHP file basically makes a MySQL query and returns a JSON formatted string. I am thinking to use a Cron job to write the necessary data into a file every 15 mins, so the PHP file doesn't make a MySQL query, instead it reads from the file. Does it make a difference? I mean to alleviate the server loading (CPU/MySQL) a bit?

  Read the article

• Email Discovery from Fairly Large Mailbox (15gig) Exchange 2003.

  - by nysingh

  I have a request from our legal team to search a users' mailbox. the mailbox is 15gig and it is on exchange 2003. I am trying to run windows desktop search and google desktop. I have gotten them to index mailbox but getting the results into a folder to backup on cd is getting bit difficult. Windows desktop search and google desktop search does not allow you to copy results to another folder. Can anyone point me to right direction? What is the best way to index and copy the results of pst, mailbox or edb file? What is the best discovery methods? Thanks

  Read the article

• What makes an Apple hard drive special?

  - by Michael Shnitzer

  The Mac Pro has a specific hard drive for sale in the Apple Store for $549.00. The drive has the following specs: Serial ATA 3GB per second 7200 RPM Amazon has a hard drive with the same specs for $169.99. The only difference I can tell is that the Apple hard drive label says it has "Apple HDD Firmware". What exactly is the benefit of this firmware and is there something I am missing that make up for the price difference in these two drives? Update: My initial comparison between the two drive was unfair. Apparently 2TB drives that are 3 GB/S and 7200 RPM are quiet a bit more than $169.99. Dell has a 2 TB SATA Caviar Black from Western Digital that is $319.99, which is closer to Apple's price.

  Read the article

• Server Sizing Methodology

  - by adbrpc

  Our development environment consist of JBoss 5.0.1 DB Server, SQL Server 2008, Oracle IDM. Hardware is Win 2008 32 bit, 4GB RAM. We have reached stage where our environment can not handle application resulting in JBoss shut down throwing out of memory errors and CPU reaching to 90% usage. I am looking methodology to calculate correct server sizing where I input TPS, max number of concurrent users, max CPU utilization etc.. to give me number of servers, RAM size, number of cores. I am expecting application to grow 10% annually. Load Balancer and Failover should also be taken in account while sizing.

  Read the article

• Certificates compartments (certmgr.msc)?

  - by Royi Namir

  After reading a while , Im trying to understand what kind of certificates will be found at : Personal Other People Trusted Root Certicfiation Authorities will personal will contains only private keys ? I'm a bit confused. What about certificates which arent trusted and I manually trust them , where will they be ? Also , Why do I only have the CurrentUser Tab in my computer ? where is the local computer tab ? here is a picture from the internet. I only have the "current user" Node.... Thanks.

  Read the article

• Should I use my real name in my open source project?

  - by Jardo

  I developed a few freeware programs in the past which I had signed with my pseudonym Jardo. I'm now planning to release my first open source project and was thinking of using my full real name in the project files (as the "author"). I thought it would be good to use my name as my "trademark" so if someone (perhaps a future headhunter) googles my name, they'll find my projects. But on the other side, I feel a bit paranoid about disclosing my name (in the least case I could be getting a lot of spam to my email, its not that hard to guess your private email from your name). What do you think can be "dangerous" on disclosing your full name? What are the pros and cons? Do you use your real name or a pseudonym in your projects? I read this question: What are the advantages and disadvantages to using your real name online? but that doesn't apply to me bacause it's about using your real name online (internet discussions, profiles, etc.) where I personally see no reason to use my real name... And there is also this question: Copyrighting software, templates, etc. under real name or screen name? which deals with creating a business or a brand which also doesn't apply to me because I will never sell/give away my open source project and if someone else joins in, they can write their name as co-author without any problems...

  Read the article

• Cannot open mailbox

  - by AdamL

  Ive got a server running Windows Server 2012 and Exchange 2013 on my local domain. Ive got the mailboxes setup and can send/receive emails fine when using OWA. If i try to open the mailbox using Outlook 2010, I get the below error If i try to expand the folder, i get the same message but am still able to use OWA. When I try to run a send/receive, I get the below error: After a bit of researching on the web, people suggest that the profile is corrupt. I have recreated the profile and tried again but still same error. Another post has suggested that the issue is DNS and client PCs should be able to resolve autodiscover.domain.local and server.domain.local to the IP of the server. This is fine on my network. Every user has got the same issue and I am struggling to identify what is causing the fault. Advise appreciated.

  Read the article

< Previous Page | 429 430 431 432 433 434 435 436 437 438 439 440  | Next Page >