Search Results

Search found 31319 results on 1253 pages for 'source engine'.

Page 435/1253 | < Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >

• FreeBSD 8.1 unstable network connection

  - by frankcheong

  I have three FreeBSD 8.1 running on three different hardware and therefore consist of different network adapter as well (bce, bge and igb). I found that the network connection is kind of unstable which I have tried to scp some 10MB file and found that I cannot always get the files completed successfully. I have further checked with my network admin and he claim that the problem is being caused by the network driver which cannot support the load whereby he tried to ping using huge packet size (around 15k) and my server will drop packet consistently at a regular interval. I found that this statement may not be valid since the three server is using three different network drive and it would be quite impossible that the same problem is being caused by three different network adapter and thus different network driver. Since then I have tried to tune up the performance by playing around with the /etc/sysctl.conf figures with no luck. kern.ipc.somaxconn=1024 kern.ipc.shmall=3276800 kern.ipc.shmmax=1638400000 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Required by pf net.inet.ip.forwarding=1 #Network Performance Tuning kern.ipc.maxsockbuf=16777216 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.recvbuf_max=16777216 # Setting specifically for 1 or even 10Gbps network net.local.stream.sendspace=262144 net.local.stream.recvspace=262144 net.inet.tcp.local_slowstart_flightsize=10 net.inet.tcp.nolocaltimewait=1 net.inet.tcp.mssdflt=1460 net.inet.tcp.sendbuf_auto=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.sendspace=262144 net.inet.tcp.recvspace=262144 net.inet.udp.recvspace=262144 kern.ipc.maxsockbuf=16777216 kern.ipc.nmbclusters=32768 net.inet.tcp.delayed_ack=1 net.inet.tcp.delacktime=100 net.inet.tcp.slowstart_flightsize=179 net.inet.tcp.inflight.enable=1 net.inet.tcp.inflight.min=6144 # Reduce the cache size of slow start connection net.inet.tcp.hostcache.expire=1 Our network admin also claim that they see quite a lot of network up and down from their cisco switch log while I cannot find any up down message inside the dmesg. Have further checked the netstat -s but dont have concrete idea. tcp: 133695291 packets sent 39408539 data packets (3358837321 bytes) 61868 data packets (89472844 bytes) retransmitted 24 data packets unnecessarily retransmitted 0 resends initiated by MTU discovery 50756141 ack-only packets (2148 delayed) 0 URG only packets 0 window probe packets 4372385 window update packets 39781869 control packets 134898031 packets received 72339403 acks (for 3357601899 bytes) 190712 duplicate acks 0 acks for unsent data 59339201 packets (3647021974 bytes) received in-sequence 114 completely duplicate packets (135202 bytes) 27 old duplicate packets 0 packets with some dup. data (0 bytes duped) 42090 out-of-order packets (60817889 bytes) 0 packets (0 bytes) of data after window 0 window probes 3953896 window update packets 64181 packets received after close 0 discarded for bad checksums 0 discarded for bad header offset fields 0 discarded because packet too short 45192 discarded due to memory problems 19945391 connection requests 1323420 connection accepts 0 bad connection attempts 0 listen queue overflows 0 ignored RSTs in the windows 21133581 connections established (including accepts) 21268724 connections closed (including 32737 drops) 207874 connections updated cached RTT on close 207874 connections updated cached RTT variance on close 132439 connections updated cached ssthresh on close 42392 embryonic connections dropped 72339338 segments updated rtt (of 69477829 attempts) 390871 retransmit timeouts 0 connections dropped by rexmit timeout 0 persist timeouts 0 connections dropped by persist timeout 0 Connections (fin_wait_2) dropped because of timeout 13990 keepalive timeouts 2 keepalive probes sent 13988 connections dropped by keepalive 173044 correct ACK header predictions 36947371 correct data packet header predictions 1323420 syncache entries added 0 retransmitted 0 dupsyn 0 dropped 1323420 completed 0 bucket overflow 0 cache overflow 0 reset 0 stale 0 aborted 0 badack 0 unreach 0 zone failures 1323420 cookies sent 0 cookies received 1864 SACK recovery episodes 18005 segment rexmits in SACK recovery episodes 26066896 byte rexmits in SACK recovery episodes 147327 SACK options (SACK blocks) received 87473 SACK options (SACK blocks) sent 0 SACK scoreboard overflow 0 packets with ECN CE bit set 0 packets with ECN ECT(0) bit set 0 packets with ECN ECT(1) bit set 0 successful ECN handshakes 0 times ECN reduced the congestion window udp: 5141258 datagrams received 0 with incomplete header 0 with bad data length field 0 with bad checksum 1 with no checksum 0 dropped due to no socket 129616 broadcast/multicast datagrams undelivered 0 dropped due to full socket buffers 0 not for hashed pcb 5011642 delivered 5016050 datagrams output 0 times multicast source filter matched sctp: 0 input packets 0 datagrams 0 packets that had data 0 input SACK chunks 0 input DATA chunks 0 duplicate DATA chunks 0 input HB chunks 0 HB-ACK chunks 0 input ECNE chunks 0 input AUTH chunks 0 chunks missing AUTH 0 invalid HMAC ids received 0 invalid secret ids received 0 auth failed 0 fast path receives all one chunk 0 fast path multi-part data 0 output packets 0 output SACKs 0 output DATA chunks 0 retransmitted DATA chunks 0 fast retransmitted DATA chunks 0 FR's that happened more than once to same chunk 0 intput HB chunks 0 output ECNE chunks 0 output AUTH chunks 0 ip_output error counter Packet drop statistics: 0 from middle box 0 from end host 0 with data 0 non-data, non-endhost 0 non-endhost, bandwidth rep only 0 not enough for chunk header 0 not enough data to confirm 0 where process_chunk_drop said break 0 failed to find TSN 0 attempt reverse TSN lookup 0 e-host confirms zero-rwnd 0 midbox confirms no space 0 data did not match TSN 0 TSN's marked for Fast Retran Timeouts: 0 iterator timers fired 0 T3 data time outs 0 window probe (T3) timers fired 0 INIT timers fired 0 sack timers fired 0 shutdown timers fired 0 heartbeat timers fired 0 a cookie timeout fired 0 an endpoint changed its cookiesecret 0 PMTU timers fired 0 shutdown ack timers fired 0 shutdown guard timers fired 0 stream reset timers fired 0 early FR timers fired 0 an asconf timer fired 0 auto close timer fired 0 asoc free timers expired 0 inp free timers expired 0 packet shorter than header 0 checksum error 0 no endpoint for port 0 bad v-tag 0 bad SID 0 no memory 0 number of multiple FR in a RTT window 0 RFC813 allowed sending 0 RFC813 does not allow sending 0 times max burst prohibited sending 0 look ahead tells us no memory in interface 0 numbers of window probes sent 0 times an output error to clamp down on next user send 0 times sctp_senderrors were caused from a user 0 number of in data drops due to chunk limit reached 0 number of in data drops due to rwnd limit reached 0 times a ECN reduced the cwnd 0 used express lookup via vtag 0 collision in express lookup 0 times the sender ran dry of user data on primary 0 same for above 0 sacks the slow way 0 window update only sacks sent 0 sends with sinfo_flags !=0 0 unordered sends 0 sends with EOF flag set 0 sends with ABORT flag set 0 times protocol drain called 0 times we did a protocol drain 0 times recv was called with peek 0 cached chunks used 0 cached stream oq's used 0 unread messages abandonded by close 0 send burst avoidance, already max burst inflight to net 0 send cwnd full avoidance, already max burst inflight to net 0 number of map array over-runs via fwd-tsn's ip: 137814085 total packets received 0 bad header checksums 0 with size smaller than minimum 0 with data size < data length 0 with ip length > max ip packet size 0 with header length < data size 0 with data length < header length 0 with bad options 0 with incorrect version number 1200 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 300 packets reassembled ok 137813009 packets for this host 530 packets for unknown/unsupported protocol 0 packets forwarded (0 packets fast forwarded) 61 packets not forwardable 0 packets received for unknown multicast group 0 redirects sent 137234598 packets sent from this host 0 packets sent with fabricated ip header 685307 output packets dropped due to no bufs, etc. 52 output packets discarded due to no route 300 output datagrams fragmented 1200 fragments created 0 datagrams that can't be fragmented 0 tunneling packets that can't find gif 0 datagrams with bad address in header icmp: 0 calls to icmp_error 0 errors not generated in response to an icmp message Output histogram: echo reply: 305 0 messages with bad code fields 0 messages less than the minimum length 0 messages with bad checksum 0 messages with bad length 0 multicast echo requests ignored 0 multicast timestamp requests ignored Input histogram: destination unreachable: 530 echo: 305 305 message responses generated 0 invalid return addresses 0 no return routes ICMP address mask responses are disabled igmp: 0 messages received 0 messages received with too few bytes 0 messages received with wrong TTL 0 messages received with bad checksum 0 V1/V2 membership queries received 0 V3 membership queries received 0 membership queries received with invalid field(s) 0 general queries received 0 group queries received 0 group-source queries received 0 group-source queries dropped 0 membership reports received 0 membership reports received with invalid field(s) 0 membership reports received for groups to which we belong 0 V3 reports received without Router Alert 0 membership reports sent arp: 376748 ARP requests sent 3207 ARP replies sent 245245 ARP requests received 80845 ARP replies received 326090 ARP packets received 267712 total packets dropped due to no ARP entry 108876 ARP entrys timed out 0 Duplicate IPs seen ip6: 2226633 total packets received 0 with size smaller than minimum 0 with data size < data length 0 with bad options 0 with incorrect version number 0 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 0 fragments that exceeded limit 0 packets reassembled ok 2226633 packets for this host 0 packets forwarded 0 packets not forwardable 0 redirects sent 2226633 packets sent from this host 0 packets sent with fabricated ip header 0 output packets dropped due to no bufs, etc. 8 output packets discarded due to no route 0 output datagrams fragmented 0 fragments created 0 datagrams that can't be fragmented 0 packets that violated scope rules 0 multicast packets which we don't join Input histogram: UDP: 2226633 Mbuf statistics: 962679 one mbuf 1263954 one ext mbuf 0 two or more ext mbuf 0 packets whose headers are not continuous 0 tunneling packets that can't find gif 0 packets discarded because of too many headers 0 failures of source address selection Source addresses selection rule applied: icmp6: 0 calls to icmp6_error 0 errors not generated in response to an icmp6 message 0 errors not generated because of rate limitation 0 messages with bad code fields 0 messages < minimum length 0 bad checksums 0 messages with bad length Histogram of error messages to be generated: 0 no route 0 administratively prohibited 0 beyond scope 0 address unreachable 0 port unreachable 0 packet too big 0 time exceed transit 0 time exceed reassembly 0 erroneous header field 0 unrecognized next header 0 unrecognized option 0 redirect 0 unknown 0 message responses generated 0 messages with too many ND options 0 messages with bad ND options 0 bad neighbor solicitation messages 0 bad neighbor advertisement messages 0 bad router solicitation messages 0 bad router advertisement messages 0 bad redirect messages 0 path MTU changes rip6: 0 messages received 0 checksum calculations on inbound 0 messages with bad checksum 0 messages dropped due to no socket 0 multicast messages dropped due to no socket 0 messages dropped due to full socket buffers 0 delivered 0 datagrams output netstat -m 516/5124/5640 mbufs in use (current/cache/total) 512/1634/2146/32768 mbuf clusters in use (current/cache/total/max) 512/1536 mbuf+clusters out of packet secondary zone in use (current/cache) 0/1303/1303/12800 4k (page size) jumbo clusters in use (current/cache/total/max) 0/0/0/6400 9k jumbo clusters in use (current/cache/total/max) 0/0/0/3200 16k jumbo clusters in use (current/cache/total/max) 1153K/9761K/10914K bytes allocated to network (current/cache/total) 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) 0/0/0 requests for jumbo clusters denied (4k/9k/16k) 0/8/6656 sfbufs in use (current/peak/max) 0 requests for sfbufs denied 0 requests for sfbufs delayed 0 requests for I/O initiated by sendfile 0 calls to protocol drain routines Anyone got an idea what might be the possible cause?

  Read the article

• SEO?s Perception Gap

  Search engine optimization is a newly emerging industry that is still growing every day. Its close ties to the Internet and Google allows the service to ride the coat-tails of search into an ever-cha... [Author: Ethan Luke - Computers and Internet - April 09, 2010]

  Read the article

• array and array_view from amp.h

  - by Daniel Moth

  This is a very long post, but it also covers what are probably the classes (well, array_view at least) that you will use the most with C++ AMP, so I hope you enjoy it! Overview The concurrency::array and concurrency::array_view template classes represent multi-dimensional data of type T, of N dimensions, specified at compile time (and you can later access the number of dimensions via the rank property). If N is not specified, it is assumed that it is 1 (i.e. single-dimensional case). They are rectangular (not jagged). The difference between them is that array is a container of data, whereas array_view is a wrapper of a container of data. So in that respect, array behaves like an STL container, whereas the closest thing an array_view behaves like is an STL iterator (albeit with random access and allowing you to view more than one element at a time!). The data in the array (whether provided at creation time or added later) resides on an accelerator (which is specified at creation time either explicitly by the developer, or set to the default accelerator at creation time by the runtime) and is laid out contiguously in memory. The data provided to the array_view is not stored by/in the array_view, because the array_view is simply a view over the real source (which can reside on the CPU or other accelerator). The underlying data is copied on demand to wherever the array_view is accessed. Elements which differ by one in the least significant dimension of the array_view are adjacent in memory. array objects must be captured by reference into the lambda you pass to the parallel_for_each call, whereas array_view objects must be captured by value (into the lambda you pass to the parallel_for_each call). Creating array and array_view objects and relevant properties You can create array_view objects from other array_view objects of the same rank and element type (shallow copy, also possible via assignment operator) so they point to the same underlying data, and you can also create array_view objects over array objects of the same rank and element type e.g.   array_view<int,3> a(b); // b can be another array or array_view of ints with rank=3 Note: Unlike the constructors above which can be called anywhere, the ones in the rest of this section can only be called from CPU code. You can create array objects from other array objects of the same rank and element type (copy and move constructors) and from other array_view objects, e.g.   array<float,2> a(b); // b can be another array or array_view of floats with rank=2 To create an array from scratch, you need to at least specify an extent object, e.g. array<int,3> a(myExtent);. Note that instead of an explicit extent object, there are convenience overloads when N<=3 so you can specify 1-, 2-, 3- integers (dependent on the array's rank) and thus have the extent created for you under the covers. At any point, you can access the array's extent thought the extent property. The exact same thing applies to array_view (extent as constructor parameters, incl. convenience overloads, and property). While passing only an extent object to create an array is enough (it means that the array will be written to later), it is not enough for the array_view case which must always wrap over some other container (on which it relies for storage space and actual content). So in addition to the extent object (that describes the shape you'd like to be viewing/accessing that data through), to create an array_view from another container (e.g. std::vector) you must pass in the container itself (which must expose .data() and a .size() methods, e.g. like std::array does), e.g.   array_view<int,2> aaa(myExtent, myContainerOfInts); Similarly, you can create an array_view from a raw pointer of data plus an extent object. Back to the array case, to optionally initialize the array with data, you can pass an iterator pointing to the start (and optionally one pointing to the end of the source container) e.g.   array<double,1> a(5, myVector.begin(), myVector.end()); We saw that arrays are bound to an accelerator at creation time, so in case you don’t want the C++ AMP runtime to assign the array to the default accelerator, all array constructors have overloads that let you pass an accelerator_view object, which you can later access via the accelerator_view property. Note that at the point of initializing an array with data, a synchronous copy of the data takes place to the accelerator, and then to copy any data back we'll see that an explicit copy call is required. This does not happen with the array_view where copying is on demand... refresh and synchronize on array_view Note that in the previous section on constructors, unlike the array case, there was no overload that accepted an accelerator_view for array_view. That is because the array_view is simply a wrapper, so the allocation of the data has already taken place before you created the array_view. When you capture an array_view variable in your call to parallel_for_each, the copy of data between the non-CPU accelerator and the CPU takes place on demand (i.e. it is implicit, versus the explicit copy that has to happen with the array). There are some subtleties to the on-demand-copying that we cover next. The assumption when using an array_view is that you will continue to access the data through the array_view, and not through the original underlying source, e.g. the pointer to the data that you passed to the array_view's constructor. So if you modify the data through the array_view on the GPU, the original pointer on the CPU will not "know" that, unless one of two things happen: you access the data through the array_view on the CPU side, i.e. using indexing that we cover below you explicitly call the array_view's synchronize method on the CPU (this also gets called in the array_view's destructor for you) Conversely, if you make a change to the underlying data through the original source (e.g. the pointer), the array_view will not "know" about those changes, unless you call its refresh method. Finally, note that if you create an array_view of const T, then the data is copied to the accelerator on demand, but it does not get copied back, e.g.   array_view<const double, 5> myArrView(…); // myArrView will not get copied back from GPU There is also a similar mechanism to achieve the reverse, i.e. not to copy the data of an array_view to the GPU. copy_to, data, and global copy/copy_async functions Both array and array_view expose two copy_to overloads that allow copying them to another array, or to another array_view, and these operations can also be achieved with assignment (via the = operator overloads). Also both array and array_view expose a data method, to get a raw pointer to the underlying data of the array or array_view, e.g. float* f = myArr.data();. Note that for array_view, this only works when the rank is equal to 1, due to the data only being contiguous in one dimension as covered in the overview section. Finally, there are a bunch of global concurrency::copy functions returning void (and corresponding concurrency::copy_async functions returning a future) that allow copying between arrays and array_views and iterators etc. Just browse intellisense or amp.h directly for the full set. Note that for array, all copying described throughout this post is deep copying, as per other STL container expectations. You can never have two arrays point to the same data. indexing into array and array_view plus projection Reading or writing data elements of an array is only legal when the code executes on the same accelerator as where the array was bound to. In the array_view case, you can read/write on any accelerator, not just the one where the original data resides, and the data gets copied for you on demand. In both cases, the way you read and write individual elements is via indexing as described next. To access (or set the value of) an element, you can index into it by passing it an index object via the subscript operator. Furthermore, if the rank is 3 or less, you can use the function ( ) operator to pass integer values instead of having to use an index object. e.g. array<float,2> arr(someExtent, someIterator); //or array_view<float,2> arr(someExtent, someContainer); index<2> idx(5,4); float f1 = arr[idx]; float f2 = arr(5,4); //f2 ==f1 //and the reverse for assigning, e.g. arr(idx[0], 7) = 6.9; Note that for both array and array_view, regardless of rank, you can also pass a single integer to the subscript operator which results in a projection of the data, and (for both array and array_view) you get back an array_view of rank N-1 (or if the rank was 1, you get back just the element at that location). Not Covered In this already very long post, I am not going to cover three very cool methods (and related overloads) that both array and array_view expose: view_as, section, reinterpret_as. We'll revisit those at some point in the future, probably on the team blog. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• CodePlex Daily Summary for Tuesday, December 28, 2010

  CodePlex Daily Summary for Tuesday, December 28, 2010Popular ReleasesMonitorWang: MonitorWang v1.0.5 (Growler): What's new?Added Growl Notification Finalisers - these are interceptor components that work exclusively with the Growl Publisher. These allow you to modify the Growl Notification just prior to it being sent by the publisher. You can inject custom logic to precisely control how the Growl Notification will appear; this includes changing the Growl Priority level and message text. I've created to two Growl Notification Finalisers - one allows you to change the Growl Notification Priorty based on ...Catel - WPF and Silverlight MVVM library: 1.0.0: And there it is, the final release of Catel, and it is no longer a beta version!Multicore Task Framework: MTF 1.0.2: Release 1.0.2 of Multicore Task Framework.EnhSim: EnhSim 2.2.7 ALPHA: 2.2.7 ALPHAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Mongoose has bee...LINQ to Twitter: LINQ to Twitter Beta v2.0.19: Mono 2.8, Silverlight, OAuth, 100% Twitter API coverage, streaming, extensibility via Raw Queries, and added documentation. Bug fixes.Hammock for REST: Hammock v1.1.4: v1.1.4 ChangesOAuth fixes for post content handling, encoding, and url parameter doubling v1.1.3 ChangesAdded an event handler for use with retries Made improvements to OAuth for performance, plus additional fixes Added OAuth token refresh support Fixed memory leak in content streaming, and regression issue with async GET call response handling v1.1.2 ChangesAdded OAuth Echo native support and static helper methods on OAuthCredentials Fixes for multi-part stream writing and recovery...Rocket Framework (.Net 4.0): Rocket Framework for Windows V 1.0.0: Architecture is reviewed and adjusted in a way so that I can introduce the Web version and WPF version of this framework next. - Rocket.Core is introduced - Controller button functions revisited and updated - DB is renewed to suite the implemented features - Create New button functionality is changed - Add Question Handling featuresFxCop Integrator for Visual Studio 2010: FxCop Integrtor 1.1.0: New FeatureSearch violation information FxCop Integrator provides the violation search feature. You can find out specific violation information by simple search expression.Analyze with FxCop project file FxCop Integrator supports code analysis with FxCop project file. You can customize code analysis behavior (e.g. analyze specifid types only, use specific rules only, and so on). ImprovementImproved the code analysis result list to show more information (added Proejct and File column). Change...NoSimplerAccounting: NoSimplerAccounting 6.0: -Fixed a bug in expense category report.NHibernate Mapping Generator: NHibernate Mapping Generator 2.0: Added support for Postgres (Thanks to Angelo)NewLife XCode: XCode v6.5.2010.1223 ????（????v3.5??）: XCode v6.5.2010.1223 ????，??： NewLife.Core ??? NewLife.Net ??? XControl ??? XTemplate ????，??C#?????? XAgent ???? NewLife.CommonEnitty ??????（???，XCode??????） XCode?? ?????????，??????????????????，?????95% XCode v3.5.2009.0714 ??，?v3.5?v6.0???????????????，?????????。v3.5???????????，??????????????。 XCoder ??XTemplate?????????，????????XCode??? XCoder_Src ???????（????XTemplate????），??????????????????MiniTwitter: 1.64: MiniTwitter 1.64 ???? ?? 1.63 ??? URL ??????????????VivoSocial: VivoSocial 7.4.0: Please see changes: http://support.vivoware.com/project/ChangeLog.aspx?PROJID=48Umbraco CMS: Umbraco 4.6 Beta - codename JUNO: The Umbraco 4.6 beta (codename JUNO) release contains many new features focusing on an improved installation experience, a number of robust developer features, and contains more than 89 bug fixes since the 4.5.2 release. Improved installer experience Updated Starter Kits (Simple, Blog, Personal, Business) Beautiful, free, customizable skins included Skinning engine and Skin customization (see Skinning Documentation Kit) Default dashboards on install with hide option Updated Login t...SSH.NET Library: 2010.12.23: This release includes some bug fixes and few new fetures. Fixes Allow to retrieve big directory structures ssh-dss algorithm is fixed Populate sftp file attributes New Features Support for passhrase when private key is used Support added for diffie-hellman-group14-sha1,diffie-hellman-group-exchange-sha256 and diffie-hellman-group-exchange-sha1 key exchange algorithms Allow to provide multiple key files for authentication Add support for "keyboard-interactive" authentication method...ASP.NET MVC SiteMap provider: MvcSiteMapProvider 2.3.0: Using NuGet?MvcSiteMapProvider is also listed in the NuGet feed. Learn more... Like the project? Consider a donation!Donate via PayPal via PayPal. Release notesThis will be the last release targeting ASP.NET MVC 2 and .NET 3.5. MvcSiteMapProvider 3.0.0 will be targeting ASP.NET MVC 3 and .NET 4 Web.config setting skipAssemblyScanOn has been deprecated in favor of excludeAssembliesForScan and includeAssembliesForScan ISiteMapNodeUrlResolver is now completely responsible for generating th...Media Companion: Media Companion 3.400: Extract the entire archive to a folder which has user access rights, eg desktop, documents etc. A manual is included to get you startedWindows Media Player GNTP Plugin: WMP-GNTP v1.0.5: This is the installer for WMP-GNTP. Install it to get the plugin on your system.Google Geo Kit: Static Google Map WinForm Control Nightly Build: 12/22/2010 MD5sum - b8118c9970d6dc9480fe7c41f042537f add event OnGMapNotDefined. When anything went wrong in StaticGmap internally and return null stream, this event will be firedSilverlight Sockets Sample: No binaries: Whole source code in a ZIP. Shame 'Source Code' tab isn't working, so I'll just upload a ZIP.New ProjectsAsfMojo: AsfMojo is an open source .NET ASF parsing library, providing support for parsing WMA audio and WMV video files. It offers classes to create streams from packet data within a media file, gather file statistics and extract audio segments or frame accurate still frames.asp.net ajax file manager: Features : Full Ajax Support security View Image Create folder Delete file & folder Copy file & folder Move file & folder multiple selection ( Ctrl + Select ) Easy installation and configuration Open source. compatible IE7,IE8,FF,Safari,Chrome http://www.filemanager.3ntar.netBoxNet: BoxNet is a opensource library which will provide possibility for Windows Phone 7 developers to integrate with DropBox.C# Sqlite For WP7: C# Sqlite Port for Windows phone 7 and possibly Silverlight 3, 4. The core engine was slightly modified to be used with IsolatedStorage and SqliteClient were ported by using missing codes from Mono project in order to maximize usability and portability from desktop.Comparison of Managed Compression Algorithms: Visual Studio 2010 Console Test Harness with samples of MiniLZO, QuickLz, SharpZipLib, iRolz and other managed compression classes. Tests compression of a 2MB Word file and shows timings. Useful in deciding what type of compression to use. Developers can easily add their own.Cypher Bot 2011: Cypher Bot 2011 Brings the word cipher to a whole new level. You can now easily open, save, print, and send ciphers. Make a short message or completly encrypt a document. The cipher is impossible to figure out unless you have the keyword and algorithm to solve it! Try it out!Directed Graph for .NET: This project presents a simple directed graph implementation for the .NET framework using C# language.DynamicAccess: DynamicAccess is a library to aid connecting DLR languages such as ironpython and ironruby to non-dynamic languages like managed C++. It also fills in some gaps in the current C# support of dynamic objects, such as member access by string and deletion of members or indexes.Euro for Windows XP: A simple tool and sample to change Estonian currency from Estonian Krone (kr) to Euro (€). Applies to all versions of Windows and from .NET 2.0 which is default build. The sample creates a custom locale and updates existing users through Registry.Excel PowerShell Console: An Excel AddIn to enable using PowerShell for Excel automation.fantastic: fantasticGomarket Toolbar: GoMarket FireFox toolbarjs: jsLiving Agile's Common Framework: This project is a collection of commonly used routines here at Living Agile. There are a lot of helpful extension methods, logging, configuration and threading utilities. All other Living Agile projects have a dependency on this project.MapWindow 4: MapWindow4 is a free windows GIS application and uses an ActiveX control at it's core that can be embedded into many applications that don't support .Net such as excel, access, visual basic 6, or other pre-.Net languages.Mdelete API: Delete all files and directores in windows shell. Support long path (less then 32000 chars) and network path (eg. \\server\share or \\127.0.0.1\share)OP-Code SyntaxEditor: OP-Code SyntaxEditor is a Windows Forms Control, similar to a multi-line TextBox, which syntax highlights text and provides some features for code editing.passion: passionSharpHighlighter: SharpHighlighter is an extension for Visual Studio; a fairly simple code highlighter for C# I made it for anyone who wants to download and learn how to create is own parser or Syntax Highlighter. This sample will highlight only C# classes and structs but it's quite extensible.Test Center Locator: Test center locator makes it easier to find closest toefl or Ielts test center

  Read the article

• SPAN/Port mirroring on Linksys switch

  - by Bastien974

  Hi all, I'm trying to deploy a Snort box in my LAN. I have a Linksys SRW248G4 and trying to configure Port mirroring so that Snort can listen everything on the network in promiscuous mode. So in ADMIN / Port Mirroring, I have 3 things: Source Port (e1,...e48, g1...g4) Type (Rx, Tx, Both) Target (e1...e48, g1...g4) Last time I played with it, I killed all traffic on the switch, I had to reboot it several times... so now I'm asking question before: Do I need to configure each Source Port (from 1 to 48) to forward to the single promiscuous port ? 48 rules !? Is that correct ? Thanks !

  Read the article

• Summary of the Solaris 11 webcast's livechat QnA session

  - by Karoly Vegh

  This is a followup post to the previous summary on the "What's new with Solaris 11 since the launch" webcast. That webcast has had a chatroom for a live Questions and Answers session running. I went through the archive of those and compiled a list of some of the (IMHO) most relevant and most frequently asked questions, I'd like to share. This is the first part, covering the QnA of Session I and II of the webcast, in a followup post we can have a look of the rest of the sessions if required - let me know in the comments. Also, should you have questions, as usual, feel free to ask those there, too.  ...and here come the answered questions:  When will Exadata be based on Solaris in place of Oracle Enterprise Linux?Exadata offers both Solaris 11 or Oracle Enterprise Linux.  The choice can be made at deployment time based on your OS needs.What are all other benefits and futures avilable in solaris 11 (cloud O.S.) compared to cloud based Red Hat Linux and Windows?suggest you check out our cloud white paper for a view of this. Also the OTN Solaris 11 page has some good articles. Here are the links:  http://www.oracle.com/technetwork/server-storage/solaris11/documentation/o11-106-sol11-cloud-501066.pdf http://www.oracle.com/technetwork/server-storage/solaris11/overview/index.htmlWill 11.1 have a more complete IPS respository for Oracle and FOSS software?Yes, we are adding additional packages to the various package repositories. Since Solaris 11 was launched, both the Oracle Solaris Studio tools as well as Oracle Solaris Cluster have been made available along with numerous new FOSS packages. We will continue to be adding additional Oracle products and open source packages in the future. Will Exadata be based on Sparc in place of intel-amd x86 in next future ?We can't publically discuss futures, but we actually have a SPARC version of Exadata today, it's called SuperCluster, this is such a powerfull multipurpose system that it actually have multiple personalities built into one system: Exadata, Exalogic, and it can be a general purpose platform if you want. Have I understood this right? Livepatching KSplice-style is coming to Solaris 11 too?We're looking at that for certain types of Solaris patches in the future.Will there be a security framework like SST/JASS for Solaris 11?We can't talk about the future projects on a public forum, but we recognize the need for SST/JASS and want to address this as soon as possible. On the other side there are a whole bunch of "best practices" that are now embedded into Solaris 11 by default, so out of the box Solaris 11 should already address part of what SST/JASS gave you. (For example we did a lot of work on improving the auditing performance so that we can now have it turned on by default). On x86 can install VirtualBox in a Zone and use that to host other OSes.Yes, this was one of the first things we made sure would work when we acquired VirtualBox when we were still Sun Microsystems. If I have a Solaris 11 Control Domain on a T-series, can I run a Solaris 10 Ldom with Solaris 8 branded containers?Yes, you can.Is Oracle Solaris free or do we need to purchase?Solaris is free, the entitlement to run it comes either with a Sun system (new or historical) or for 3rd party systems the entitlement comes with a support contract. Note that for production use you will be expected to get a support contract. If you don't want to use the Solaris system (Sun or 3rd party) for production use (i.e. development) you can get an OTN license on the Oracle Technical Network website. Will encryption and deduplication both work on a share?This should work at the same time. What approaches does Solaris use to monitor usage?There are many different tools in Solaris to monitor usage. The main ones are the "stats" (vmstat, mpstat, prstat, ...), the kstat interface, and DTrace (to get details you couldn't see before). And then there are layered tools that can interface with these tools (Ops Center, BMC, CA, Tivoli, ...) Apart little-endian, big-endian how is it easy to port Solaris applications on Sparc to x86 and vice-versa ?Very easy. Except for certain hardware specific applications (those that utilize hardware specific drivers), all of the same Oracle Solaris APIs exist for all architectures. Is IPS based patching aware of the fact that zones can reside on ZFS and move from one physical server to another ?IPS is definitely aware of zones and uses ZFS to support boot environments for non-global zones in the same way that's used for the global zone. With respect to moving a zone from one physical server to another, Solaris 11 supports to the same zone attach/deattach method that was introduced in Solaris 10. Is vnic support in Ldoms planned?This is currently being investigated for a future LDOM release. Is it possible with the new patching system to build a system later with the same patch level as a system built a few months earlier?Yes, you can choose/define exactly which version should go to the system and it will always put the same bits in place. The technical answer is that you choose the version of the "entire" package you want on the system and the rest flows from there. Is it in the plans to allow zones to add/remove zpools to running zones dynamically in future updates?Work in this area is currently under investigation. Any plans to realese Solaris 11 source code? i.e. opensolaris?We currently can't comment on publicly releasing the source code. If you need/want this access please let your Oracle account team know. What about VirtualBox and Solaris11 for virtualization?Solaris 11 works great with VirtualBox, as both a client and a host system. Will Oracle DB software eventually be supplied as IPS packages? When?We don't have a date yet but this is actively being worked on. What are the new artifacts in Oracle Solaris 11 than the previous versions?There are quite a few actually. The best start is to look at our "Evaluate Solaris 11" page, and there you also can find a Transition Guide. http://www.oracle.com/technetwork/server-storage/solaris11/overview/evaluate-1530234.html So, this seems just like RedHat's YUM environment?IPS offers certain features beyond those in YUM or other packaging systems. For example, IPS works with ZFS and Solaris Boot Environments to provide a safe environment for software lifecycle management so that changes can be reverted by switching to an older boot environment. With Zones on solaris 11, can I do paravirtualitation?The great thing about zones is you don't *need* paravirtualization. You're making the same direct kernel calls that you would outside of a zone.  It's an incredibly significant performance win over hypervisor-based virtualization. Are zones/containers officially supported to run Oracle Databases?  EBIZ?Hi Calvin, the answer is yes, here is the support matrix for DB:  http://www.oracle.com/technetwork/database/virtualizationmatrix-172995.html I've found some nasty bugs in Solaris 11 (one of which today) that have been fixed in community forks (i.e., Illumos). Will Oracle ever restart collaboration with the community?We continue to work with the community, just not as open on all projects as we did before (For example IPS is an open project) and the source of more than half of the Solaris packages is posted on our opensource websites. I can't comment on what we will do in the future. And with regards to bugs please file them through the support organization and we will get them resolved. Is zpool vdev removal on-the fly now possible ?This issue is actively being investigated although we don't have a date for when this feature will be available. Is pgstat now the official replacement for corestat ?It's intended to provide similar functionality Where are the opensource website?For Oracle Solaris, visit http://www.oracle.com/technetwork/opensource/systems-solaris-1562786.html As a cloud-scale virtualization, is it going to be easier to move zones between machines? maybe even automatic in case of a hardware failure?Hi Gashaw, we already have customers that have implemented what they refer to as "flying zones" that they can move around very easily. They use Solaris Cluster to do this. What about VMware vMotion like feature?We have secure live migration with both Logical Domains on SPARC T series systems, and with Oracle VM on x86 systems. When running Solaris 10/11 on an enterprise server with a lot of zones, what are best practises commands to show the system is running fine? (has enough hardware resources). For example CPU / Memory / I/O / system load. What are the recommended values?For Solaris 11, look into the new zonestat(1M) command that provides a great deal of information about zone utilization. In addition, there is new work underway in providing additional observability in areas such as per-zone file system I/O. Java optimizations done with Solaris 11? For X86 platforms too? Where can I find more detail about this?There is lots of work that go into optimizing Java for Oracle Solaris 10 & 11 on both SPARC and x86. See http://www.oracle.com/technetwork/articles/servers-storage-dev/solarisforjavadevelop-168642.pdf What is meant by "ZFS Shadow Migration"?It's a way to migrate data from another file system to ZFS: http://docs.oracle.com/cd/E23824_01/html/E24456/filesystem-3.html Is flash archive available with S11?Flash archive is not.  There is a procedure for disaster recovery, and we're working on a modern archive-based deployment tool for a future update.  The disaster recovery tool is here: http://www.oracle.com/technetwork/articles/servers-storage-admin/o11-091-sol-dis-recovery-489183.html  You can also use Distribution Constructor to build common golden images. Will solaris 11 be available on the ODA soon?The idea's under evaluation -- we'll share your interest with the team. What steps can be taken to ensure that breaches of security are identified quickly?There are a number of tools, including the "bart" tool and "pkg verify" to ensure that software has not been compromised.  Solaris Audit can also be used to detect unauthorized access.  You can also use Immutable Zones to protect against compromise.  There are a wide variety of security tools, and I've covered only a few. What is the relation from solaris to java 7 speed optimization?There is constant work done between the Oracle Solaris and Java teams on performance optimizations. See http://docs.oracle.com/javase/7/docs/technotes/guides/vm/performance-enhancements-7.html for examples. What is the difference in the Solaris 11 installation compared to solaris 10 ? where i can find the document describing basic repository concepts ?The best place to start is: http://www.oracle.com/technetwork/server-storage/solaris11/index.html Hope you found the post useful. For questions, input, requests for the second half of the QnA, please find the comment section below.  -- charlie  

  Read the article

• Internet Business Coaching and Marketing For Travel Professionals - Highlighting SEO

  Search Engine Optimization is a well known strategy and most of the webmasters are familiar with it. There may be several techniques involved within this category that can facilitate in optimizing the rankings of a website.

  Read the article

• BizTalk: Dynamic SMTP Port: Unknown Error Description

  - by Leonid Ganeline

  Today I investigated one strange error working with Dynamic SMTP Port.   Event Type: Error Event Source: BizTalk Server 2006 Event Category: BizTalk Server 2006 Event ID: 5754 Date: ******** Time: ********AM User: N/A Computer: ******** Description: A message sent to adapter "SMTP" on send port "*********" with URI "mailto:********.com" is suspended. Error details: Unknown Error Description  MessageId:  {********} InstanceID: {********}   My code was pretty simple and the source of the error was hidden somewhere inside it.   msg_MyMessage(SMTP.CC) = var_CC; msg_MyMessage(SMTP.From) = var_From; msg_MyMessage(SMTP.Subject) = var_Subject; msg_MyMessage(SMTP.EmailBodyText) = var_Message;    // #1    msg_MyMessage(SMTP.SMTPHost) = " localhost "; msg_MyMessage(SMTP.SMTPAuthenticate) = 0; When I added line #2, this frustrating error disappeared.    msg_MyMessage(SMTP.EmailBodyTextCharset) = "UTF-8"; // #2 Conclusion: If we use the SMTP.EmailBodyText property, we must set up the SMTP.EmailBodyTextCharset property. To me it looks like a bug in BizTalk. [Maybe it is "by design", but in this case give us a useful error text!!!] And don't ask me how much time I've spent with this investigation.

  Read the article

• Why do non-working websites look like search indexes?

  - by Asaf

  An example of this could be shown on every .tk domain that doesn't exist, just write www.givemeacookie.tk or something, you get into a fake search engine/index Now these things are all over, I use to always ignore it because it was obvious just a fake template, but it's everywhere. I was wondering, where is it originated (here it's searchmagnified, but in their website it's also something generic) ? Is there a proper name for these type of websites?

  Read the article

• Why do none-working websites look like search indexes?

  - by Asaf

  An example of this could be shown on every .tk domain that doesn't exist, just write www.givemeacookie.tk or something, you get into a fake search engine/index Now these things are all over, I use to always ignore it because it was obvious just a fake template, but it's everywhere. I was wondering, where is it originated (here it's searchmagnified, but in their website it's also something generic) ? Is there a proper name for these type of websites?

  Read the article

• PostSharp deployment to build machine- use Setup installation, not NuGet package.

  - by Michael Freidgeim

  PostSharp has well documented different methods of installation. I've chosen installing NuGet packages, because according to  Deploying PostSharp into a Source Repository NuGet is the easiest way to add PostSharp to a project without installing the product on every machine. However it didn't work well for me. I've added PostSharp NuGet package to one project in the solution.  When I wanted to use PostSharp in other project, Visual Studio tab showed that PostSharp is not enabled for this project I've added the NuGet package to the new project, which installed a new version of the package in the new Packages subfolder. When I wanted to refer PostSharp from the third project, I've ended up with another version of PostSharp installed. Additionally multiple versions of Diagnostics were created. It definitely causes confusion and errors.   More problems we experienced on build server. According to Using PostSharp on a Build Server "If you chose to deploy PostSharp in the source repository, it does not need to be installed specifically on the build server. " It didn't work on our build server. I kept getting errors "The "AddIns" parameter is not supported by the "PostSharp21" task." and "The "DisableSystemBindingPolicies" parameter is not supported by the "PostSharp21" task."   From my experience the only way to have the latest version of PostSharp working on the build server is to install it using Setup as described in Deploying PostSharp with the Setup Program     Gael acknowledged the issues with possible version conflicts. see http://support.sharpcrafters.com/discussions/problems/388-the-postsharp21-task-failed-unexpectedly

  Read the article

• iptables blocking ssh communication

  - by Michal Sapsa

  I'm using this script for iptables: #!/bin/sh echo "1" > /proc/sys/net/ipv4/ip_forward iptables -F iptables -X iptables -F -t nat iptables -X -t nat iptables -F -t filter iptables -X -t filter iptables -t filter -P FORWARD DROP iptables -t filter -A FORWARD -s 192.168.0.0/255.255.0.0 -d 0/0 -j ACCEPT iptables -t filter -A FORWARD -s 0/0 -d 192.168.0.0/255.255.0.0 -j ACCEPT iptables -t nat -A POSTROUTING -s 10.8.0.1/255.255.255.0 -j MASQUERADE iptables -A FORWARD -s 10.8.0.1/255.255.255.0 -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -d 0/0 -j MASQUERADE iptables -I FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu iptables -t nat -A PREROUTING -i eth1 -p udp --dport 16161 -j DNAT --to 192.168.0.251:16161 iptables -t nat -A PREROUTING -i eth1 -p udp --sport 16161 -j DNAT --to 192.168.0.251:16161 #openvpn iptables -I INPUT -p tcp --dport 1194 -j ACCEPT iptables -I INPUT -p udp --dport 1194 -j ACCEPT I end up with some iptables rules that should work but don't work - probably because of me. # Generated by iptables-save v1.4.12 on Mon May 26 13:15:43 2014 *raw :PREROUTING ACCEPT [1657523:1357257330] :OUTPUT ACCEPT [36804:34834370] -A PREROUTING -p icmp -j TRACE -A PREROUTING -p tcp -j TRACE -A OUTPUT -p icmp -j TRACE -A OUTPUT -p tcp -j TRACE COMMIT # Completed on Mon May 26 13:15:43 2014 # Generated by iptables-save v1.4.12 on Mon May 26 13:15:43 2014 *nat :PREROUTING ACCEPT [5033:345623] :INPUT ACCEPT [154:34662] :OUTPUT ACCEPT [6:1968] :POSTROUTING ACCEPT [2:120] -A PREROUTING -i eth0 -p tcp -m tcp --dport 16161 -j DNAT --to-destination 192.168.0.251:22 -A PREROUTING -i eth1 -p tcp -m tcp --dport 16161 -j DNAT --to-destination 192.168.0.251:22 -A POSTROUTING -s 10.8.0.0/24 -j MASQUERADE -A POSTROUTING -s 192.168.0.0/24 -j MASQUERADE COMMIT # Completed on Mon May 26 13:15:44 2014 # Generated by iptables-save v1.4.12 on Mon May 26 13:15:44 2014 *filter :INPUT ACCEPT [548:69692] :FORWARD DROP [8:384] :OUTPUT ACCEPT [2120:1097479] -A INPUT -p udp -m udp --dport 1194 -j ACCEPT -A INPUT -p tcp -m tcp --dport 1194 -j ACCEPT -A FORWARD -p tcp -m tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu -A FORWARD -s 192.168.0.0/16 -j ACCEPT -A FORWARD -d 192.168.0.0/16 -j ACCEPT -A FORWARD -s 10.8.0.0/24 -j ACCEPT -A FORWARD -i eth0 -o eth1 -p tcp -m tcp --dport 22 -j ACCEPT -A FORWARD -i eth1 -o eth0 -p tcp -m tcp --dport 22 -j ACCEPT COMMIT TRACE at PREROUTEING AND OUTPUT are only for debuging this thing. When I ssh at public ip with port 16161 I don't get any message, only TimeOut so it looks like I don't get communication back to remote server. ETH0 is the world, ETH1 is LAN Any IPTABLES Masters willing to give a hand ? iptables -vL Chain INPUT (policy ACCEPT 20548 packets, 3198K bytes) pkts bytes target prot opt in out source destination 38822 7014K ACCEPT udp -- any any anywhere anywhere udp dpt:openvpn 0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:openvpn Chain FORWARD (policy DROP 1129 packets, 64390 bytes) pkts bytes target prot opt in out source destination 214K 11M TCPMSS tcp -- any any anywhere anywhere tcpflags: SYN,RST/SYN TCPMSS clamp to PMTU 4565K 1090M ACCEPT all -- any any 192.168.0.0/16 anywhere 5916K 7315M ACCEPT all -- any any anywhere 192.168.0.0/16 0 0 ACCEPT all -- any any 10.8.0.0/24 anywhere 0 0 ACCEPT tcp -- any any anywhere 192.168.0.251 tcp dpt:16161 Chain OUTPUT (policy ACCEPT 59462 packets, 19M bytes) pkts bytes target prot opt in out source destination

  Read the article

• Website Health Check - Keyword Blunders - Part 1

  Website Health Check provides a report on the components of a website. Keyword is one of the most important components. Let's start with it. Keywords are the starting point of Search Engine Optimization (SEO). So, when you make a mistake with the keywords, your whole optimization process becomes a waste of time.

  Read the article

• Force an LXC container to use its own IP address

  - by emma sculateur

  Sorry if this question has already been asked. I could not find it, I have this setup : +---------------------------------------------------------------------------------------------+ |HOST | | | | +-------------------------------------------------+ | | | UBUNTU-VM | | | | | | | | +-------------------+ | | | | |UBUNTU-LXC | | +------------------+ | | | | 10.0.0.3/24 | 10.0.0.1/24 | |OTHER VM | | | | | eth0-----lxcbr0----------eth0-----------br0----------eth0 | | | | | | 192.168.100.2/24| 192.168.100.1/24 |192.168.100.3/24 | | | | +-------------------+ | +------------------+ | | +-------------------------------------------------+ | +---------------------------------------------------------------------------------------------+ When I ping 192.168.100.3 from my UBUNTU-LXC, the source IP address is automatically changed to 192.168.100.2 by UBUNTU-VM. It's like having a NAT, whereas I really want my UBUNTU-LXC to talk with it own IP address. Is there any way to do this ? Edit : these info may be relevant : I am using KVM +libvirt to set up my VMs Here is how I create my interface in UBUNTU-VM : <interface type='bridge'> <mac address='52:54:00:cb:aa:74'/> <source bridge='br0'/> <model type='e1000'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> </interface>

  Read the article

• External routing for local interfaces in a virtualized network

  - by Arkaitz Jimenez

  Current setup: br0| |-- tun10 -pipe-tun0(192.240.240.1) |-- tun11 -pipe-tun1(192.240.240.2) |-- tun12 -pipe-tun2(192.240.240.3) The pipe program is a custom program that forwards data back2back between two tun interfaces. The idea is puting 2 programs in .2 and .3 while keeping .1 as the local interface in the current machine. The main problem is that I want to route packets to .2 and to .3 through .1 and br0, but as they are local interfaces, the kernel ignores any routing instruction, it just delivers the packet to the proper interface. Tried iptables, but the nat table doesn't even see ping packets to those ifaces. A "ping 192.240.240.2" delivers a icmp packet with source and dest .2 to tun1, ideally it should deliver a source .1 dest .2 at tun1 through tun0-br0-tun1 Any hint? Here the output of some commands: Output

  Read the article

• Web deploy (msdeploy), syncing everything but sites and pools (but include siteDefaults)

  - by jishi

  Today I do the following to sync two webservers but skip all site configuration: msdeploy -verb:sync -source:webServer -dest:webServer,computerName=web25:8080 -skip:objectName=section,absolutePath=system.applicationHost/sites -skip:objectName=section,absolutePath=system.applicationHost/applicationPools However, this effectively also skip the siteDefaults, which I do like to sync (system.applicationHost/sites/siteDefaults) There doesn't seem to be a way to "include" a section, to override the skip directive. And there doesn't seem to be a way to sync only the siteDefaults section from applicationHost either, since source appHostConfig only seem to sync a specified site, and not siteDefaults. Maybe it is possible to "skip" using an Xpath expression or similar, to only skip the nodes, but include , but I find the documentation a bit confusing and my Xpath is rusty.

  Read the article

• Can't (re)Install VLC (removed by update{again})

  - by David matthews

  I use VLC a lot, And When 2.0 came out Ubuntu did not update to that version, the REPO had the older version even months later, So I added the daily repo: http://ppa.launchpad.net/videolan/stable-daily/ubuntu and that worked for a while, after a few months later I received a 'Distribution upgrade' and when I installed it, it removed VLC. when I tried to re-install it gave me a bunch of unmet dependency's, so I disabled the source, ran apt-get update, and tried to install the older VLC, that did not work either. I eventually found a web page, and it helped me get it working, and I was also able to get the 'Stable Daily' working too But last night, I got another 'disto upgrade' and it uninstalled VLC again. when I try to reinstall from daily I get: The following packages have unmet dependencies: vlc : Depends: fonts-freefont-ttf but it is not installable Depends: vlc-nox (= 2.0.3+git20121005+r392-0~r42~precise1) but it is not going to be installed Depends: libvlccore5 (>= 2.0.0) but it is not going to be installed Recommends: vlc-plugin-notify (= 2.0.3+git20121005+r392-0~r42~precise1) but it is not going to be installed Recommends: vlc-plugin-pulse (= 2.0.3+git20121005+r392-0~r42~precise1) but it is not going to be installed E: Unable to correct problems, you have held broken packages. and from the default source: vlc : Depends: vlc-nox (= 2.0.3-0ubuntu0.12.04.1) but it is not going to be installed Depends: libvlccore5 (>= 2.0.0) but it is not going to be installed Recommends: vlc-plugin-notify (= 2.0.3-0ubuntu0.12.04.1) but it is not going to be installed vlc-plugin-pulse : Depends: vlc-nox (= 2.0.3-0ubuntu0.12.04.1) but it is not going to be installed Depends: libvlccore5 (>= 2.0.0) but it is not going to be installed E: Unable to correct problems, you have held broken packages. (and yes, I ran apt-get update after turning off daily) Any Ideas? (ubuntu 12.04 64bit)

  Read the article

• Implementing a multilanguage AI contest platform

  - by Alejandro Piad

  This is a followup to this question. To sum: I'm implementing an AI contest site, where each user may submit several AI implementations for different games. Think about Google AI Challenge but instead of just having a big event once a year, I would like it more on a league fashion, with all virtual players playing with each other every some close period of time. I want to support as many programming languages as possible. I've seen that contest sites (like codeforces) ask you to submit a source code and interact through stdin and stdout. The first question is: what is the best way of supporting multiple languages? As I see it, I can either ask people to upload some binary/script, and interact either through stdin/*stdout*, or sockets, or the file system; or ask people to submit source code, and wrap it with whatever is necessary for the interaction. I would like to skip the need to compile the code by myself (in the server, I mean), but I am willing to do it if its the "best" choice. I need to comunicate virtual players with each other, or even better, with some intermediary arbiter. The second question is regarding security. If I'm going to be running user code in my server, I want to ensure strict security conditions, like no file system access, no networking, etc. Otherwise it would be a safe heaven for hackers. I will be implementing the engine/arbiter in .NET. I would like to support at least C#, C++, Java and Python for the user's implementations. I'm willing to write interfaces for each of these languages to simplify the user interaction with the system. Thanks in advance.

  Read the article

• CodePlex Daily Summary for Thursday, March 08, 2012

  CodePlex Daily Summary for Thursday, March 08, 2012Popular ReleasesMetodología General Ajustada - MGA: 02.01.01: Cambios John: Se modifica el instalador para solucionar problema de restauración detectado en sistemas Windows Vista que hacen que el backup busque el mismo archivo de nombre de cuando se creó la copia de seguridad. Para el caso, como se creó con MGA_Distribucion, así mismo lo intentaba buscar al restaurar, cuando en realidad estaba solo MGA en SQL Express.EntitiesToDTOs - Entity Framework DTO Generator: EntitiesToDTOs.v2.1: Changelog Fixed template file access issue on Win7. Fix on configuration load when target project was not found and "Use project default namespace" was checked. Minor fix on loading latest configuration at startup. Minor fix in VisualStudioHelper class. DTO's properties accessors are now in one line. Improvements in PropertyHelper to get a cleaner and more performant code. Added Website project type as a not supported project type. Using Error List pane from VS IDE to show Enti...DotNetNuke® Community Edition CMS: 06.01.04: Major Highlights Fixed issue with loading the splash page skin in the login, privacy and terms of use pages Fixed issue when searching for words with special characters in them Fixed redirection issue when the user does not have permissions to access a resource Fixed issue when clearing the cache using the ClearHostCache() function Fixed issue when displaying the site structure in the link to page feature Fixed issue when inline editing the title of modules Fixed issue with ...Mayhem: Mayhem Developer Preview: This is the developer preview of Mayhem. Enjoy!Team Foundation Server Process Template Customization Guidance: v1 - For Visual Studio 11: Welcome to the BETA release of the Team Foundation Server Process Template Customization preview. As this is a BETA release and the quality bar for the final Release has not been achieved, we value your candid feedback and recommend that you do not use or deploy these BETA artifacts in a production environment. Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has not been through an independent technical review Documentation has not been rev...Magelia WebStore Open-source Ecommerce software: Magelia WebStore 1.2: Medium trust compliant lot of small change for medium trust compliance full refactoring of user management refactoring of Client Refactoring of user management Magelia.WebStore.Client no longer reference Magelia.WebStore.Services.Contract Refactoring page category multi parent category added copy category feature added Refactoring page catalog copy catalog feature added variant management improvement ability to define a default variant for a variable product ability to ord...StackBuilder: StackBuilder 1.0.5.0: + Added Collada/WebGL export to show 3D animation of pallet solutions...Delta Engine: Delta Engine Beta Preview v0.9.4: v0.9.4 is the release for February 2012, but it was delayed till 2012-03-07 until content generation worked much better for v0.9.4. The main improvements were done on the server side (content generation and improved build support for iOS and Android). v0.9.4 is also the first version everyone can use to deploy their application onto all supported platforms, see Marketplace Licensing for details: http://deltaengine.net/Marketplace Documentation for this version can be found at: http://help.de...PDFsharp - A .NET library for processing PDF: PDFsharp and MigraDoc Foundation 1.32: PDFsharp and MigraDoc Foundation 1.32 is a stable version that fixes a few bugs that were found with version 1.31. Version 1.32 includes solutions for Visual Studio 2010 only (but it should be possible to add the project files to existing solutions for VS 2005 or VS 2008). Users of VS 2005 or VS 2008 can still download version 1.31 with the solutions for those versions that allow them to easily try the samples that are included. While it may create smaller PDF files than version 1.30 because...Terminals: Version 2.0 - Release: Changes since version 1.9a:New art works New usability in Organize favorites window Improved usability of imports/exports and scans Large number of fixes Improvements in single instance mode Comparing November beta 4, this corrects: New application icons Doesn't show Logon error codes Fixed command line arguments exception for single instance mode Fixed detaching of tabs improved usability in detached window Fixed option settings for Capture manager Fixed system tray noti...AutoLoL: AutoLoL v2.1.5: Updated version of Autolol that works with the Fiora patch.MFCMAPI: March 2012 Release: Build: 15.0.0.1032 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeTortoiseHg: TortoiseHg 2.3.1: bugfix releaseCommonLibrary: Code: CodePowerGUI Visual Studio Extension: PowerGUI VSX 1.5.2: Added support for PowerGUI 3.2.VidCoder: 1.3.1: Updated HandBrake core to 0.9.6 release (svn 4472). Removed erroneous "None" container choice. Change some logic and help text to stop assuming you have to pick the VIDEO_TS folder for a DVD scan. This should make previewing DVD titles on the Queue Multiple Titles window possible when you've picked the root DVD directory.ExtAspNet: ExtAspNet v3.1.0: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ??????????。 ExtAspNet ??????? JavaScript，?? CSS，?? UpdatePanel，?? ViewState，?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????：Apache License 2.0 (Apache) ??：http://extasp.net/ ??：http://bbs.extasp.net/ ??：http://extaspnet.codeplex.com/ ??：http://sanshi.cnblogs.com/ ????： +2012-03-04 v3.1.0 -??Hidden???????（〓?〓）。 -?PageManager??...AcDown????? - Anime&Comic Downloader: AcDown????? v3.9.1: ?? ●AcDown??????????、??、??????，????1M，????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。??????AcPlay?????，??????、????????????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)，?????"?????????"??? ??????????????，??????????： ??"AcDo...Media Companion: MC 3.433b Release: General More GUI tweaks (mostly imperceptible!) Updates for mc_com.exe TV The 'Watched' button has been re-instigated Added TV Menu sub-option to search ALL for new Episodes (includes locked shows) Movies Added 'Source' field (eg DVD, Bluray, HDTV), customisable in Advanced Preferences (try it out, let us know how it works!) Added HTML <<format>> tag with optional parameters for video container, source, and resolution (updated HTML tags to be added to Documentation shortly) Known Issu...Picturethrill: Version 2.3.2.0: Release includes Self-Update feature for Picturethrill. What that means for users is that they are always guaranteed to have a fresh copy of Picturethrill on their computers with all latest fixes. When Picturethrill adds a new website to get pictures from, you will get it too!New Projects1906Ultras for Windows Phone: This is a supporters group applicationActivities.Web: WF4 ?????? web ????????????????? Activities library related web, available in WF4 Alternative ColorConverter: Alternative ColorConverter is just a little better ColorConverter which inherits from System.Drawing.ColorConverter. Alternative ColorConverter re-implements the ConvertFromString method to support more color formats such as "255, 11, 22, 33"(a,r,g,b), "11, 22, 33"(r,g,b), "#0056ef"(#rgb), "#05e"(#rgb), etc.Asp.Net development: asp.net MVC Jquery Javascript Silverlight web servicesBusQ: BusQ makes it easier for developers to work with Azure Service Bus Queues. You'll no longer have to create Topic or Queue receivers to listen for messages. It's developed in C#.Comarch Animation Framework: Code-based animation framework for Silverlight and WPFÐ? án môn l?p trình game: Game dàn tr?n theo lu?tMovieSort: MovieSort is in the early stage of development.MVC Bootstrap: A project that should help kick-start new MVC projects with basic, needed features - entity framework, dependency injection, asynchronously task handling, EF membership provider and lots more. OGrilsSellSys: sellPermutationGenerator: PermutationGeneratorSharePoint Database Information Integration Web Part Suite: The SharePoint Database Web Part Suite helps you to integrate your database information into SharePoint like any other ordinary SharePoint List. The Web Part Suite supports list views and detail dialogs to modify or to create new database entries. To bring data into the SharePoint Interface only three steps are necessary: 1. Put the Web Part onto a SharePoint Page 2. Configure the Database Connection settings 3. Setup the list view columns Ready. It is possible to define for each refere...Silverlight application using Arcgis Server 2010: Arcgis Server 10 , Silverlight , Asp.Net , Arcgis APItestingemail: testingemailTomSweet: this is a blog template ,welcome every one modify it ,make it strongerVirtual School: Escola virtual descentralizadaxCoder Project: xCoder Project is a solution for Auto-Generating project files, C# Code files from an existing DataBase. xConnected: Experts Connected NetworkXRDTech: XRDTech ProjectZomato API Managed Wrapper for .NET: Managed wrapper for the Zomato.com REST API, which can be used to retrieve restaurant information for the major cities in India. Available for both the .NET Framework and Silverlight for Windows Phone.

  Read the article

• Process Rules!

  - by Ajay Khanna

  One of the key components of a process is “Business Rule”. Business rule takes many forms inside your process definition and in a way is a manifestation of your company’s business policy. Business rules inside the process are used for policy enforcement, governance, decision management, operations efficiency etc. Following are some basic types of rules that can be a part of your process. 1. Process conditions:  These are defined as the process gateways that determine a path process will take depending on the process parameters. For Example, if discount >10% go to approval path : if discount < 10% auto-approve order. 2. Data rules: These business rules are defined as facts in decision table or knowledge base. The process captures all required parameters and submits those to RETE based rules engine. Rules engine processes the data and returns the result back. For example, rules determining your insurance eligibility. 3. Event rules: Here the system is monitoring the various events and events patterns that are emerging inside the process or external to the process. You can define actions or alerts to be triggered when a certain pattern of events emerges over a specified time period. Such types of rules need Complex Event Processing and are used in applications like Credit Card Fraud detection or Utility Demand Response. 4. User Interface Rules: In order to add dynamic behavior to UI or to keep users from making mistakes and enforcing policy, another mechanism available is UI rules. They are evaluated as the end user is filling out the web forms. These may include enabling and disabling of UI as per business policy. An example could be, if the age of a user is less than 13 years, disable credit card field and enable parental approval required checkbox. Your process may include many of such rule types. Oracle OpenWorld provides a unique opportunity to listen to Oracle Business Process Management Experts and Customers.  We will discuss business rules during various sessions in Oracle OpenWorld. Two of the sessions specifically focused on business rules are listed below: Accelerating an Implementation of Complex Worldwide Business Approval Rules Wednesday, Oct 3, 10:15 AM Moscone South – 305 Oracle Business Rules Use Cases Design and Testing Wednesday, Oct 3, 3:30 PM Marriott Marquis - Golden Gate C3   Oracle Business Process Management Track covers a variety of topics, and speakers covering technology, methodology and best practices. You can see the list of Business process Management sessions here. Come back to this blog for more coverage from Oracle OpenWorld!

  Read the article

• Java stored procedures in Oracle, a good idea?

  - by Scott A

  I'm considering using a Java stored procedure as a very small shim to allow UDP communication from a PL/SQL package. Oracle does not provide a UTL_UDP to match its UTL_TCP. There is a 3rd party XUTL_UDP that uses Java, but it's closed source (meaning I can't see how it's implemented, not that I don't want to use closed source). An important distinction between PL/SQL and Java stored procedures with regards to networking: PL/SQL sockets are closed when dbms_session.reset_package is called, but Java sockets are not. So if you want to keep a socket open to avoid the tear-down/reconnect costs, you can't do it in sessions that are using reset_package (like mod_plsql or mod_owa HTTP requests). I haven't used Java stored procedures in a production capacity in Oracle before. This is a very large, heavily-used database, and this particular shim would be heavily used as well (it serves as a UDP bridge between a PL/SQL RFC 5424 syslog client and the local rsyslog daemon). Am I opening myself up for woe and horror, or are Java stored procedures stable and robust enough for usage in 10g? I'm wondering about issues with the embedded JVM, the jit, garbage collection, or other things that might impact a heavily used database.

  Read the article

• What is a generic term for name/identifier? (as opposed to label)

  - by d3vid

  I need to refer to a number of things that have both an identifier value (used in code and configuration), and a human-readable label. These things include: database columns dropdown items subapplications objects stored in a dictionary I want two unambiguous terms. One to refer to the identifier/value/key. One to refer to the label. As you can see, I'm pretty settled on the latter :) For the former, identifier seems best (not everything is strictly a key, and value and name could refer to the label; although, identifier usually refers only to a variable name), but I would prefer to follow an established practice if there is one. Is there an established term for this? (Please provide a source.) If not, are there any examples of a choice from a significant source (Java APIs, MSDN, a big FLOSS project)? (I wasn't sure if this should be posted here or to English Language & Usage. I thought this was the more appropriate expert audience. Happy to migrate if not.)

  Read the article

• Can PHP be run in Apache via mod_php and mod_fcgi side by side?

  - by Mario Parris

  I have an existing installation of Apache (2.2.10 Windows x86) using mod_php and PHP 5.2.6. Can I run another site in a virtual host using FastCGI and a different version of PHP, while stilling running the main site in mod_php? I've made an attempt, but when I add my FCGI settings to the virtual host container, Apache is unable to restart. httpd.conf mod_php settings: LoadModule php5_module "C:\PHP\php-5.2.17-Win32-VC6-x86\php5apache2_2.dll" AddHandler application/x-httpd-php .php PHPIniDir "C:\PHP\php-5.2.17-Win32-VC6-x86" httpd-vhosts.conf fastcgi settings: <VirtualHost *:80> DocumentRoot "C:/Inetpub/wwwroot/site-b/source/public" ServerName local.siteb.com ServerAlias local.siteb.com SetEnv PHPRC "C:\PHP\php-5.3.5-nts-Win32-VC6-x86\php.ini" FcgidInitialEnv PHPRC "C:\PHP\php-5.3.5-nts-Win32-VC6-x86" FcgidWrapper "C:\PHP\php-5.3.5-nts-Win32-VC6-x86\php-cgi.exe" .php AddHandler fcgid-script .php </VirtualHost> <Directory "C:/Inetpub/wwwroot/site-b/source/public"> Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All Order allow,deny Allow from all </Directory>

  Read the article

• SEO Copywriting - Tips on Making Sense to Humans and Google

  This article covers a range of handy tips that you can implement to boost your search engine ratings. It deals with striking the balance between optimising for search engines like Google and making sense to your human visitors. You'll learn a whole range of writing techniques to boost your ranking, along with some behind the scenes tips.

  Read the article

• The Correct Use of Blogs For SEO Purposes

  Blogs can be used very effectively to aid the SEO process. Here we take a look at how they can be used to boost your presence and to create good back links to help your search engine optimisation effort.

  Read the article

< Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >