Search Results

Search found 14154 results on 567 pages for 'sp send dbmail'.

Page 435/567 | < Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >

• How to transfer files via infrared on Linux?

  - by arielnmz

  I know this is a way too old technology but I've got some files inside a very old cellphone that I need to transfer to a very old computer. So far my Infrared USB device works well, it's detected by the machine (lsusb output): Bus 002 Device 002: ID 0df7:0620 Mobile Action Technology, Inc. MA-620 Infrared Adapter I've tried to send the file over MMS and even email (it lacks bluetooth, not to mention USB). But this cellphones's firmware doesn't let me attach the files. The file was originally transfered via IrDA, and it only has an internal memory (a whole 2 million bytes! whoa!). I found a package called irda-utils, but it seems that there are only two executables: irdaping and irdadump. I think the dump utility might do the job (which as far as I can see it's kind of a version of tcpdump but for IrDA), but I don't even know how to process the received frames. Could this question may be what I'm looking for? EDIT While reading through the Linux Infrared HOWTO I found about the OpenObex project, which may be what I'm looking for...

  Read the article

• Vyatta masquerade out bridge interface

  - by miquella

  We have set up a Vyatta Core 6.1 gateway on our network with three interfaces: eth0 - 1.1.1.1 - public gateway/router IP (to public upstream router) eth1 - 2.2.2.1/24 - public subnet (connected to a second firewall 2.2.2.2) eth2 - 10.10.0.1/24 - private subnet Our ISP provided the 1.1.1.1 address for us to use as our gateway. The 2.2.2.1 address is so the other firewall (2.2.2.2) can communicate to this gateway which then routes the traffic out through the eth0 interface. Here is our current configuration: interfaces { bridge br100 { address 2.2.2.1/24 } ethernet eth0 { address 1.1.1.1/30 vif 100 { bridge-group { bridge br100 } } } ethernet eth1 { bridge-group { bridge br100 } } ethernet eth2 { address 10.10.0.1/24 } loopback lo { } } service { nat { rule 100 { outbound-interface eth0 source { address 10.10.0.1/24 } type masquerade } } } With this configuration, it routes everything, but the source address after masquerading is 1.1.1.1, which is correct, because that's the interface it's bound to. But because of some of our requirements here, we need it to source from the 2.2.2.1 address instead (what's the point of paying for a class C public subnet if the only address we can send from is our gateway!?). I've tried binding to br100 instead of eth0, but it doesn't seem to route anything if I do that. I imagine I'm just missing something simple. Any thoughts?

  Read the article

• How can I set Thunderbird's "Recipient" column to display my email address rather than a friendly na

  - by Howiecamp

  After configuring a single, unified Inbox within Outlook 2007 to unify multiple email accounts, I found Thunderbird 3's Smart Folder feature. It works great, providing individual inboxes for each of your email accounts and a unified inbox which provides a unified, virtual view of those other inboxes. Thunderbird is smart enough so what when I reply to an email addressed to a specific email account, the reply is "From" that email address. In order to know which inbound email was to which of my accounts, I added the "Recipient" column to the inbox Smart Folder: What's displayed in the Recipient column depends on how the sender/sender's email client addresses the email. If they send it to just "[email protected]" without specifying a friendly name, the Recipient column displays "[email protected]" and there's no ambiguity about which account the email was sent to. However, if the sender has me in their address book (likely stored with a friendly name), it will be addressed as "Howard Camp [[email protected]]" and then show in the Recipient column as "Howard Camp". The problem is that if someone emails me with a friendly name at another of my email accounts (e.g. "Howard Camp [[email protected]]", the Recipient column will also display "Howard Camp" and I can't tell which account it's to until I open the message and/or look at the details. How can I configure Thunderbird to always display my email address rather than the sender-specified friendly name in the Recipient column?

  Read the article

• Emails going to Junk for Hotmail recipients

  - by David George

  We send daily mass emails to our customers (~30,000+ emails per day). We have problems with Hotmail users receiving our emails. Sometimes the email goes to the Junk folder, but often it will got to their inbox, but the content is blocked so the user sees a message saying "This email was blocked and may be dangerous". If an email is sent to GMAIL it is usually not blocked, but it does show up as from "Uknown" instead of the company. Please be advised I've done the following: 1. No RBLs Checked on - http://multirbl.valli.org/ 2. We do have SPF records published 3. We do have reverse DNS setup 4. Our company even signed up for the Junk Mail Reports Program at Hotmail Here is a sample header, I've noticed the X-SID-Result and the X-AUTH-Result both FAIL every time at Hotmail: X-Message-Delivery: Vj0xLjE7dXM9MDtsPTA7YT0wO0Q9MTtTQ0w9MQ== X-Message-Status: n:0 X-SID-Result: Fail X-AUTH-Result: FAIL X-Message-Info: JGTYoYF78jFqAaC29fBlDlD/ZI36+S6WoFmkQN10UxWFe1xLHhP+rDthGRZM87uHYM926hUBS+s0q46Yx9y6jdurhN6fx0bK Received: from privatecompany.com ([WanIPAddress]) by col0-mc3-f30.Col0.hotmail.com with Microsoft SMTPSVC(6.0.3790.4675); Wed, 5 May 2010 08:41:27 -0700 X-AuditID: ac10fe93-000013bc00000534-46-4be191a1618e Received: from INTERNAL-Email-SERVER([InternalIPAddress]) by privatecompany.com with Microsoft SMTPSVC(6.0.3790.4675); Wed, 5 May 2010 11:41:21 -0400 From: Private Company, Inc.<[email protected]> To: [email protected] Message-Id: <[email protected]> Subject: Date: Wed, 5 May 2010 11:42:46 -0400 MIME-Version: 1.0 Reply-To: [email protected] Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 8bit X-Brightmail-Tracker: AAAAAA== Return-Path: [email protected] X-OriginalArrivalTime: 05 May 2010 15:41:27.0837 (UTC) FILETIME=[6D06E4D0:01CAEC69]

  Read the article

• Will having 2 MX records pointing to different mail server types cause delivery issues?

  - by Lyken

  I've inherited a setup where the mail server is exchange 2010. For some reason, I'm not sure why there is 2 MX records setup. One being the exchange server which is the higher priority while the external (non-exchange) server is the secondary mx record. I don't believe this was done for redundancy reasons as the other mail server is not set to route mail back to the exchange server (it's just the webhosts email for their hosting) The client has been experiencing disappearing email, however after my investigations its not actually disappearing, but exchange is successfully receiving the mail and then passing it on to the external server. It isn't happening all the time, just with some email messages from some domains. My question: Is exchange passing the mail on because it can see the secondary MX record and is configured (somewhere) to send mail out? If so, how do I stop it? Is it as easy as just removing the second MX record pointing to the external mail server and exchange will stop passing mail on? I'm not exchange expert so I'm kinda stumped. Exchange MX tools are saying everything is setup and configured correctly from an external point of view.

  Read the article

• Email test deferred (mail transport unavailable) with ClamAV

  - by dirt

  I'm trying to set up a simple new mail server; when I send a test email to the server the email is getting hung up during delivery (user mapping is found) and the email is never found in /home/user/Maildir/new Here is my maillog after a fresh reboot and test email, there are a few warnings I am unfamiliar with. Can you please point me in the right direction? Oct 25 14:54:57 loki dovecot: master: Dovecot v2.0.9 starting up (core dumps disabled) Oct 25 14:54:58 loki postfix/postfix-script[1369]: starting the Postfix mail system Oct 25 14:54:58 loki postfix/master[1370]: daemon started -- version 2.6.6, configuration /etc/postfix Oct 25 14:56:00 loki postfix/tlsmgr[1457]: warning: request to update table btree:/etc/postfix/smtpd_scache in non-postfix directory /etc/postfix Oct 25 14:56:00 loki postfix/tlsmgr[1457]: warning: redirecting the request to postfix-owned data_directory /var/lib/postfix Oct 25 14:56:00 loki postfix/smtpd[1455]: connect from mail-ob0-f180.google.com[209.85.214.180] Oct 25 14:56:01 loki postfix/smtpd[1455]: 1CF5E20A8B: client=mail-ob0-f180.google.com[209.85.214.180] Oct 25 14:56:01 loki postfix/cleanup[1461]: 1CF5E20A8B: message-id= Oct 25 14:56:01 loki postfix/qmgr[1379]: 1CF5E20A8B: from=, size=1788, nrcpt=1 (queue active) Oct 25 14:56:01 loki postfix/qmgr[1379]: warning: connect to transport private/scan: No such file or directory Oct 25 14:56:01 loki postfix/error[1462]: 1CF5E20A8B: to=, orig_to=, relay=none, delay=0.18, delays=0.15/0.02/0/0.01, dsn=4.3.0, status=deferred (mail transport unavailable) Oct 25 14:56:01 loki postfix/smtpd[1455]: disconnect from mail-ob0-f180.google.com[209.85.214.180] master.cf snippets: # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - n - - smtpd submission inet n - n - - smtpd -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING smtps inet n - n - - smtpd -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING scan unix - - n - 16 smtp -o smtp_data_done_timeout=1200 -o smtp_send_xforward_command=yes -o disable_dns_lookups=yes 127.0.0.1:10026 inet n - n - 16 smtpd -o content_filter= -o local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks_style=host -o smtpd_authorized_xforward_hosts=127.0.0.0/8

  Read the article

• 1 document pending in printer queue in System Tray that won't go away

  - by White Phoenix

  Edit: I didn't want to do it, but I restarted my computer - cleared the problem right away. Though if I were running a Windows 2003/2008 server, I would hate to have to restart the domain controller just to get rid of this irritating problem. If I run into this problem again, I'm going to try that remove printer/reinstall printer thing. Thanks for your help @Psychogeek. Points for your attempt. Running Windows 7, 32-bit Professional. My printer is an HP OfficeJet Wireless 8500. It's connected to my network wirelessly through TCP/IP as a standalone device. I was having some print problems awhile back and had to do some print spooler stuff as part of my troubleshooting (stopping the Print Spooler service, clearing the print spooler files from C:\Windows\System32\spool\PRINTERS and then restarting the service). I've finally narrowed it down to it being application specific, so that's that. However, as a leftover from all that troubleshooting, my printer icon is stuck in the tray - when I mouseover the icon, Windows says that there is 1 document(s) pending for my username. However, when I open up that printer's queue, there's nothing in there. I restarted the Printer Spooler service and also checked C:\Windows\System32\spool\PRINTERS if there's anything in there - nothing. I did a quick Google search and an answer from one of those "reps" at the Microsoft Socialnet site says for me to uninstall and reinstall the printer. The funny thing is, when I send print jobs, they print just fine - that 1 mystery document stuck in queue isn't stopping anything from happening. Short of having to do that, are there any other quick troubleshooting steps I may be missing?

  Read the article

• Will Parallel-port dongle work on USB-to-Parallel Adapter?

  - by Gary M. Mugford

  We have a niche program running on a Win2K laptop that uses a security dongle connected to a parallel port for authentication. The laptop is getting creaky and I spent a frustrating night last night shopping various websites for a new laptop that had a parallel port. Seems I'm about three years late [G]. The question I have, is, if I buy a new(ish) laptop and use a USB-to-Parallel Port adapter, will the security dongle work? I know I'm not being specific about the app, but it's one most people wouldn't have heard of anyways. I've been guessing the answer to my question is no, since the app won't know to send a request out to the non-existent port. But, if the process actually is that the dongle sends a message INTO the computer every now and then, then it might work. And, I'm not sure whether the dongle is only needed at program startup time or randomly. The dongle is a 'permanent' addition to the old laptop. This is all about the money. We can have a newly-updated version of the program (which won't add any features we need) for the princely sum of $2700. Or we can spend $500 on a refurbed laptop still running WinXP, add a 30 buck adapter and keep the same solid, stolid performance we've come to appreciate. But it all comes down to the dongle behaviour. Oh, and a dock won't work. The whole laptop issue is about moving about the various nooks and crannies of the building with laptop in hand. Thanks for any suggestions/guidance. GM

  Read the article

• DNS lookup of GTLD servers using dig

  - by iamrohitbanga

  I ran the following command on linux >> dig . I got the following response ;; AUTHORITY SECTION: . 281 IN SOA A.ROOT-SERVERS.NET. NSTLD.VERISIGN-GRS.COM. 2010032400 1800 900 604800 86400 why does the response not contain the IP address of the root server? what do the numbers at the end of the reply mean. one of them is probably (definitely) the date. why does it report 2 root servers a.root and nstld.verisign? when i send the following queries dig com. ;; AUTHORITY SECTION:com. 51 IN SOA a.gtld-servers.net. nstld.verisign-grs.com. 1269425283 1800 900 604800 86400 again i do not get the ip addresses. when i query for the gtld server specified i can get the ip address. why is the response of dig net. same as that of dig com. except that instead of 51 we have 19 in the response.

  Read the article

• exim4 redirect mail sent to *@domain1.example.com to *@domain2.example.com

  - by nightcoder

  Current situation: We have a VPS that hosts a website example.org. Exim is configured to work as a smarthost. All emails sent through exim are successfully relayed to another mail server (that is working on example.com). Goal: To forward mail sent to *@example.org to *@example.com, i.e. change the recipient's address from *@example.org to *@example.com. Problem: If I send email to address *@example.org, then it seems exim doesn't change the address, it still relays the message to another mail server but recipient is still *@example.org. Maybe the redirect is not applied for some reason. Configuration and logs: /etc/exim4/update-exim4.conf.conf: dc_eximconfig_configtype='smarthost' dc_other_hostnames='' dc_local_interfaces='' dc_readhost='example.org' dc_relay_domains='example.org' dc_minimaldns='false' dc_relay_nets='0.0.0.0/32' dc_smarthost='example.com::26' CFILEMODE='644' dc_use_split_config='false' dc_hide_mailname='true' dc_mailname_in_oh='true' dc_localdelivery='maildir_home' /etc/exim4/conf.d/router/999_exim4-config_redirect (created by me): domain_redirect: debug_print = "R: forward for $local_part@$domain" driver = redirect domains = example.org data = [email protected] (for now data is set to a specific address for simplicity and testing) exim log when sending email to [email protected] (should be redirected to [email protected]): 2012-03-20 19:40:07 1SA4ud-0005Dw-7k <= [email protected] U=www-data P=local S=657 2012-03-20 19:40:08 1SA4ud-0005Dw-7k => [email protected] R=smarthost T=remote_smtp_smarthost H=domain2.com [184.172.146.66] X=TLS1.0:RSA_AES_256_CBC_SHA1:32 DN="C=US,2.5.4.17=#13053737303932,ST=TX,L=Houston,STREET=Suite 400,STREET=11251 Northwest Freeway,O=HostGator.com,OU=HostGator.com,OU=Comodo PremiumSSL Wildcard,CN=*.hostgator.com" 2012-03-20 19:40:08 1SA4ud-0005Dw-7k Completed So, the address is not changed :( Please help! I'm trying to make it work for half a day already :(

  Read the article

• If spambots are filling out forms on my website, should I mark the mail as spam?

  - by rob

  Apparently spambots have discovered the contact forms my website. I'm considering adding a CAPTCHA, but in the meantime I've been getting dozens of completed website forms in my Gmail account each day. I know I can configure a filter to always allow e-mails from my website to be delivered (i.e., "never send to spam"), but I'm wondering whether there are also larger implications. At first, I was marking the spam forms as spam because I figured it would block the sender's e-mail address from getting through again. But since then, I've given it some more thought. I know many spam filters use Bayesian filters and other techniques to identify spam based on its content. If I mark all these e-mails as spam, will legitimate e-mails from my website be marked as spam? Even if I stop marking the messages as spam, I can see another potential problem. My form is pretty standard (in fact, it's probably very similar to other online forms). If I mark my spambot-submitted website forms as spam, will Gmail begin to mark other people's similar-looking messages as spam?

  Read the article

• How to disable TLS in postfix?

  - by Hamlet

  Hi, How can I disable TLS in postfix? I have problems sending email to a specific host, they said I should disable TLS as I am not using it. Emails are not arriving to indamail.hu ever. Apr 6 16:21:15 server postfix/smtp[12059]: < mail13.indamail.hu[91.83.45.53]: 220 mail13.indamail.hu ESMTP Apr 6 16:21:15 server postfix/smtp[12059]: > mail13.indamail.hu[91.83.45.53]: EHLO server.xxx.hu Apr 6 16:21:15 server postfix/smtp[12059]: < mail13.indamail.hu[91.83.45.53]: 250-mail13.indamail.hu Apr 6 16:21:15 server postfix/smtp[12059]: < mail13.indamail.hu[91.83.45.53]: 250-STARTTLS Apr 6 16:21:15 server postfix/smtp[12059]: < mail13.indamail.hu[91.83.45.53]: 250-PIPELINING Apr 6 16:21:15 server postfix/smtp[12059]: < mail13.indamail.hu[91.83.45.53]: 250-8BITMIME Apr 6 16:21:15 server postfix/smtp[12059]: < mail13.indamail.hu[91.83.45.53]: 250-SIZE 10485760 Apr 6 16:21:15 server postfix/smtp[12059]: < mail13.indamail.hu[91.83.45.53]: 250 AUTH LOGIN PLAIN CRAM-MD5 Apr 6 16:21:15 server postfix/smtp[12059]: > mail13.indamail.hu[91.83.45.53]: MAIL FROM:<[email protected]> SIZE=2365 BODY=8BITMIME Apr 6 16:21:15 server postfix/smtp[12059]: > mail13.indamail.hu[91.83.45.53]: RCPT TO:<[email protected]> Apr 6 16:21:15 server postfix/smtp[12059]: > mail13.indamail.hu[91.83.45.53]: DATA Apr 6 16:21:15 server postfix/smtp[12059]: send attr reason = lost connection with mail13.indamail.hu[91.83.45.53] while sending MAIL FROM Apr 6 16:21:15 server postfix/smtp[12059]: 70B132188649: to=<[email protected]>, relay=mail13.indamail.hu[91.83.45.53]:25, delay=163321, delays=163319/0.02/1.4/0.04, dsn=4.4.2, status=deferred (lost connection with mail13.indamail.hu[91.83.45.53] while sending MAIL FROM) main.cf contains smtp_use_tls = no smtpd_use_tls = no Thanks, hamlet

  Read the article

• Mysql server won't start - no logs

  - by Owen

  After a restart, mysql won't start. sudo service mysql start gives start: Job failed to start and the logs are empty, so I have no idea where to start. I'm pretty sure permissions problems are taken care of. Edit: All disks have at least 1G of space and sh -x /etc/init.d/mysql start gives me: + set -e + basename /etc/init.d/mysql + INITSCRIPT=mysql + JOB=mysql + [ mysql = upstart-job ] + [ -z start ] + COMMAND=start + shift + [ -z ] + ECHO=echo + echo Rather than invoking init scripts through /etc/init.d, use the service(8) Rather than invoking init scripts through /etc/init.d, use the service(8) + echo utility, e.g. service mysql start utility, e.g. service mysql start + echo + echo Since the script you are attempting to invoke has been converted to an Since the script you are attempting to invoke has been converted to an + echo Upstart job, you may also use the start(8) utility, e.g. start mysql Upstart job, you may also use the start(8) utility, e.g. start mysql + grep -q start/ + status mysql + [ -z ] + [ start = stop ] + [ -n ] + start mysql start: Rejected send message, 1 matched rules; type="method_call", sender=":1.105" (uid=1000 pid=3208 comm="start mysql ") interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply="0" destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init")

  Read the article

• Bugzilla email issue

  - by xian

  My bugzilla system keep hit the following error: There was an error sending mail from '[email protected]' to '[email protected]':Can't send data I think that is some problem with my setting and configuration. First is the urlbase I have tried setting it to bugzilla.example.com, and http://127.0.0.1:81/, and http://10.0.0.236/ (My laptop IP address, I use this laptop to set up bugzilla) but the error still persists. Actually what should I put in the urlbase field? Parameter = Email Under mail_delivery_method, i choose SMTP. Under mailfrom, I put bugzilla-daemon. smtpserver, I tried leaving it blank, or setting it to 220.181.12.12 before, but could not solve my problem For my sql, the following is the data and command I used: C:\mysql\bin>mysql --user=root -p mysql Enter password: 1234 (When I install mysql into my laptop, it ask me to key an username and password, i have key in username as 'cvuser' and password as '1234', but here never ask me to key in any username) Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 1 Server version: 5.5.15 MySQL Community Server (GPL) mysql> GRANT ALL PRIVILEGES ON bugs.* TO 'bugs'@'localhost' IDENTIFIED BY '123456'; Query OK, 0 rows affected (0.03 sec) In C:\Bugzilla\localconfig, I put the following info: # # How to access the SQL database: # $db_host = "localhost"; # where is the database? $db_port = 3306; # which port to use $db_name = "bugs"; # name of the MySQL database $db_user = "bugs"; # user to attach to the MySQL database # # Enter your database password here. It's normally advisable to specify # a password for your bugzilla database user. # If you use apostrophe (') or a backslash (\) in your password, you'll # need to escape it by preceding it with a \ character. (\') or (\\) # $db_pass = '123456'; Can someone tell me where my mistake is? I have googled for this issue for few days but still cannot find the solution.

  Read the article

• Win 7 (SP1) Creationg of System Image failure... seems absurd. (0x80780119)

  - by DSKauai16

  This question seems to keep coming up in Microsoft Answers. Unfortunately, it never seems to be solved... on Microsoft Answers. Hopefully someone here will have a better idea. I'm trying to create a system image. It's not working. I have just re-installed windows as of a few hours ago. I have an admittedly older Western Digital 148 GB USB portable HDD which is not just completely empty, but I even did a long format with the NTFS file system just to be sure. The reinstallation of windows and a couple of programs take up 40 GB (seen below) When I try to create a System Image onto the USB HDD, I am told that there is not enough room. Obviously, this is wrong. The screen captures show exactly the steps that are happening to lead me to 0x80780119. I haven't done anything but put on Windows 7 (32bit; SP1) and install some programs. I haven't even done anything with them. There's almost zero in the way of data, and I checked that yes, the HDD works to accept data, send data and work with data. I've used the drive successfully for a long, long time. What's going wrong?

  Read the article

• VoIP setup for one external PSTN line

  - by Jcl

  I'm completely new to VoIP and the likes, and I'm trying to find information about what could be the best setup for this. I need 4 (maybe more in the future, but maximum 5 or 6) wireless extensions, connected to 1 PSTN line, and maybe 2 in the future. I've been trying to gather information about the gear needed but everything I find seems too much over-the-top (and extremely expensive). The main problem is that the physical place we are on doesn't have possibilities of having a decent internet connection, so using a external VoIP "virtual PBX" is not an option. Thing is, even if small, phone is critical to this organization. I currently have an analog DECT/GAP PBX which does what I need, however the PBX is very bad and the call quality is horrible, and that's why I want to change it. The requirements would be: 4 wireless terminals (routing cable is not an option), all of them ringing on incoming PSTN calls. Ability to do internal calls (4 separate offices) and ability to pass calls between terminals. The 4 terminals should be able to access the external PSTN line without dialing any special codes. Very important: terminals should be able to issue commands on the PSTN line to the external operator in the form *nn*nnnnnnnn# . Don't know wether this could face to be a problem, but I've had problems with analog PBX which would take any * as a PBX command and wouldn't allow terminals to send it to the external lines. Not so important, but would be nice to have: call waiting music Could anyone recommend such a setup? I need to be able to do this on a EXTREMELY LIMITED budget (that is: I don't have a limit, but all should get as much to zero as possible). I have enough spare powerful computers and a 300mbps wireless network which works just fine, so that's not to include in the budget. Don't really know if this is the best place to ask, but it's the most StackExchange-related site I've found to this subject.

  Read the article

• Embedding a WMV file on the web via URL in a Powerpoint presentation

  - by Dave

  I've got a situation where I want to distribute a Powerpoint presentation to several people. I want to be able to embed several large videos in this presentation by linking to a URL, for the following specific reasons: the videos are highly confidential, and I would like to be able to delete them at some later date, but still allow them to see it in the presentation while it is online. I want to send the presentation via email (so it should be small), and put the links on a server with a faster upload speed Maybe I'd like to change the video at some point without changing the presentation One option that addresses #1 is to hook up a webcam and allow them to see video stream from the office, but our upload rate is too slow for this to be a viable option. I've tried embedding a video and giving Powerpoint the URL. It seems to work initially, because the first frame appears in my slideshow. However, when I play the slideshow, nothing happens. I looked at the network traffic on my computer, and nothing was getting downloaded from the remote server. Any suggestions on how to make this work, or how to at least satisfy the criteria listed above would be great!

  Read the article

• Speeding up Outlook Express on Windows XP over satellite

  - by John

  My brother is in the field with Doctors Without Borders. I'm posting this question on his behalf. We use outlook express (on a pc running windows XP) and a 9600 baud dial up satellite phone modem to get our email direct from the server in Paris. As this is a very expensive way to communicate (our satellite bill is $50K a year, no joke), it seems like trying to streamline is a good idea. Here's the question- when we connect, the sequence goes: Send outbox mails. This goes pretty quickly, probably 10-15 seconds for each email, up to maybe a couple minutes for an email of 150k or so). The status bar moves pretty quickly, according to the emails sent. The system then says "Checking for new messages on (our account name), and "Receiving list of messages from server". This takes a long time. Like 10-15 minutes. The status bar crawls along. Then it receives the messages. "Receiving messages from server". Again, each message takes 10-15 seconds, and this part moves along reasonably fast. I'm curious as to what is going on in the second part. It takes forever, and doesn't seem to be part of the sending or receiving messages themselves. Is there a way to speed up the process by changing a preference with communicating with the server or something? Does anyone have any advice for him speeding up what Outlooks Express is doing? Obviously his software is ancient and adding more software is not realistic based on the connection speed. Thanks!

  Read the article

• Why can`t we treat SSL Certs like Pgp keys instead of trusting CAs?

  - by yarun can

  I am dumb and stupid and I do not know all the technical aspects of SSL and server/client side implications and implementations. However I understand them good enough from user point of view to use SSL and encyrption daily. I was thinking that how silly it is to trust some unknown/known CAs when it comes to our our certificates for our servers. There had been many cases of misconduct, misuse, compromises and theft of certificates/ca keys from those places. On top of those known issues we also have to pay these guys regularly. I am wondering why can not we use/treat web server certificates like we use our pgp keys? So I sign a SSL certificate and send to a central server. And then each user accessing my site checks the validity and the keys from some central server (like pgp key servers). Is this a stupid idea? If so what could be a better idea than current system of issuing valid certificates. I am looking for a better than more secure idea. Naturally this is not a solution to an existing problem, rather it will be a hypothetical solution for some future implementation of a currently messed up web of trust on the internet due to recent news about NSA and their criminal buddies around the world. thanks

  Read the article

• Passwordless SSH not working - keys copied and permissions set

  - by Comcar

  I know this question has been asked, but I'm certain I've done what all the other answers suggest. Machine A: used keygen -t rsa to create id_rsa.pub in ~/.ssh/ copied Machine A's id_rsa.pub to Machine B user's home directory Made the file permissions of id_rsa.pub 600 Machine B added Machine A's pub key to authorised_keys and authorised_keys2: cat ~/id_rsa.pub ~/.ssh/authorised_keys2 made the file permissions of id_rsa.pub 600 I've also ensured both the .ssh directories have the permission 700 on both machine A and B. If I try to login to machine B from machine A, I get asked for the password, not the ssh pass phrase. I've got the root users on both machines to talk to each other using password-less ssh, but I can't get a normal user to do it. Do the user names have to be the same on both sides? Or is there some setting else where I've missed. Machine A is a Ubuntu 10.04 virtual machine running inside VirtualBox on a Windows 7 PC, Machine B is a dedicated Ubuntu 9.10 server UPDATE : I've run ssh with the option -vvv, which provides many many lines of output, but this is the last few commands: debug3: check_host_in_hostfile: filename /home/pete/.ssh/known_hosts debug3: check_host_in_hostfile: match line 1 debug1: Host '192.168.1.19' is known and matches the RSA host key. debug1: Found key in /home/pete/.ssh/known_hosts:1 debug2: bits set: 504/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug3: Wrote 16 bytes for a total of 1015 debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug3: Wrote 48 bytes for a total of 1063 debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/pete/.ssh/identity ((nil)) debug2: key: /home/pete/.ssh/id_rsa (0x7ffe1baab9d0) debug2: key: /home/pete/.ssh/id_dsa ((nil)) debug3: Wrote 64 bytes for a total of 1127 debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,gssapi,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/pete/.ssh/identity debug3: no such identity: /home/pete/.ssh/identity debug1: Offering public key: /home/pete/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug3: Wrote 368 bytes for a total of 1495 debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/pete/.ssh/id_dsa debug3: no such identity: /home/pete/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password

  Read the article

• Setting up a localhost mail server on Mac OSX

  - by Thom

  I asked this over on stackoverflow. They pointed me here. I would love to be able to test php webapps that require emailing registration info etc. on my mac. I downloaded a version of CommuniGate Pro. I need to mail either to an account inside or outside (whichever is best) of the localhost. Again this would be used for testing purposes to verify and debug my code prior to uploading to a hosting service. Any ideas, help and/or examples would be very much appreciated. If it would be easier I could go over to Windows XP. That would just mean setting up wamp and transfering my files over from the mac side via dropbox. I got the local mailserver to work so I can send emails between accounts. However, I cannot seem to get the php code to work. I know that I am missing something. I see where this has been asked before. I want to add that I am using xampp. In Mac OS 10.6.8. I tried changing the php.ini SMTP command to macintosh-3.local. <?php function email($to, $subject, $body, $headers) { $headers = 'MIME-Version: 1.0' . "\r\n"; $headers .= 'From: <[email protected]>' . "\r\n"; mail($to, $subject, $body, $headers); } ?>

  Read the article

• Setting up a localhost mail server on Mac OSX

  - by Thom

  I asked this over on stackoverflow. I would love to be able to test php webapps that require emailing registration info etc. on my mac. I downloaded a version of CommuniGate Pro. I need to mail either to an account inside or outside (whichever is best) of the localhost. Again this would be used for testing purposes to verify and debug my code prior to uploading to a hosting service. Any ideas, help and/or examples would be very much appreciated. If it would be easier I could go over to Windows XP. That would just mean setting up wamp and transfering my files over from the mac side via dropbox. I got the local mailserver to work so I can send emails between accounts. However, I cannot seem to get the php code to work. I know that I am missing something. <?php function email($to, $subject, $body, $headers) { $headers = 'MIME-Version: 1.0' . "\r\n"; $headers .= 'From: <[email protected]>' . "\r\n"; mail($to, $subject, $body, $headers); } ?>

  Read the article

• Split horizon, route filtering, and having RIPv2 announce a non-attached route to host...

  - by Paul

  Routers A, B & C live at 10.1.1.1, 10.1.1.2 and 10.1.1.3 on a /24 metro Ethernet subnet. Each router also has its own private subnet on another interface. Router B's private subnet links thru a firewall to a 10.20.20.0 network at another organization. Router B redistributes to A and C several static routes for hosts on 10.20.20.0. However, a new host 10.20.20.5/32 must be reached via a different path that goes through router C. I know that C can advertise this host-based route with no problem, but I'd like to keep all my 10.20.20.x static routes in one place. So, how can B tell A via RIPv2 to send packets for 10.20.20.5/32 to C? So far it looks like I need no ip split-horizon on router B's 10.1.1.2 interface, perhaps because B has already learned from C other routes with a next hop of 10.1.1.3. But how does RIPv2 split horizon with no auto-summary and network 10.0.0.0 really work? If B learns a route to ANY 10.x.x.x network or host from A or C, is that enough for split horizon to keep it from redistributing ip route 10.20.20.5 255.255.255.255 10.1.1.3? And if I want to suspend split horizon only for this one new host, how do I filter out the mess of regurgitated routes that B advertises when I try no ip split-horizon? Thanks much.

  Read the article

• Install mod_perl2 on Apache 2.2.14 (Ubuntu10.04)

  - by MICADO

  I have installed via synaptic package ibapache2-mod-perl2. I tried this line in httpd.conf: "LoadModule perl_module modules/mod_perl.so" Apache tells me when I reload the server : "[warn] module perl_module is already loaded, skipping". Well ok, but when i try to look in the browser to a repertory i don't have access .Apache send me the error : Forbidden You don't have permission to access /cgi-bin/ on this server. Apache/2.2.14 (Ubuntu) Server at 192.168.0.10 Port 90 But this should show modperl is installed and that's not the case... I would like my virtual host that follows run with mod_perl2 <VirtualHost v1:80> ServerAdmin webmaster@localhost ServerName v1 DocumentRoot /var/www/v1 <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/v1/html/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /var/www/v1/cgi-bin/ <Directory "/var/www/v1/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> I'd like to know how to configure mod_perl2. Do i have to change something in the apache configuration file to make my cgi repertory works with mod_perl2? Thanks to any help!

  Read the article

• Improving abysmal 802.11n wireless network

  - by concept

  I am in desperate need of help to improve the abysmal performance of my 802.11n wireless network. At best I get 30Mbs (this is an internet download) from a technology that boasts 300Mbs, even worse is the LAN where to date best i have ever gotten is 1Mbs. It is literally quicker to copy the file to a USB and walk it to the other computer. Infrastructure is this AP 802.11n only broadcasting at both 2.4GHz and 5GHz Mac with 802.11a/b/g/n card is connected to the AP via 5GHz Linux with 802.11a/b/g/n card is connected to AP via 2.4GHz I have conducted the following tests (results at end of post) Internet based speed test wired and wireless LAN file copy wired and wireless I have read: http://nutsaboutnets.com/troubleshooting-wi-fi-problems/ http://www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-- speed http colon //www.wi-fiplanet dot com/tutorials/7-tips-to-increase-wi-fi-performance.html Slow file transfer on network between two 802.11n laptops (connected directly together via access point) Wireless Network Performance Issues Slower than expected 802.11n wireless network speeds I have made the following optimizations AP broadcasts only 802.11n on both 2.4GHz and 5GHz frequencies 2.4GHz is on a channel with least interference (live in an apartment with lots of APs), this did make a 10Mb/sec improvement Our AP is the only one transmitting on the 5GHz freq. Security: WPA Personal WPA2 AES encryption Bandwidth: 20MHz / 40MHz (i assume this to be channel bonding) I have tried the following with 0 improvement Dropped the Fragment Threshold to 512 Dropped the Request To Send (RTS) Threshold to 512 and 1 Even thought of buying a frequency spectrum analyzer, until i saw the cost of them!!! Speed test results Linux Wired: DOWNLOAD 128.40Mb/s UPLOAD 10.62Mb/s www dot speedtest dot net/my-result/2948381853 Mac Wired: DOWNLOAD 118.02Mb/s UPLOAD 10.56Mb/s www dot speedtest dot net/my-result/2948384406 Linux Wireless: DOWNLOAD 23.99Mb/s UPLOAD 10.31Mb/s www.speedtest dot net/my-result/2948394990 Mac Wireless: DOWNLOAD 22.55Mb/s UPLOAD 10.36Mb/s www.speedtest dot net/my-result/2948396489 LAN NFS 53,345,087 bytes (51Mb) file Linux Mac NFS Wired: 65.6959 Mb/sec Linux Mac NFS Wireless: .9443 Mb/sec All help is appreciated, even testing methods will be accepted.

  Read the article

< Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >