Search Results

Search found 22191 results on 888 pages for 'internet sharing'.

Page 438/888 | < Previous Page | 434 435 436 437 438 439 440 441 442 443 444 445  | Next Page >

  • Two hosts on same subnet can't see each other

    - by Joey Hewitt
    I've got two routers with two separate public IP addresses on the same subnet, but I can't get them to talk to each other. Both are connected to the internet (ISP-provided gateway) via Ethernet ports provided by the landlord, but I don't have access to or knowledge of how those are physically connected or the protocols used to get back to the ISP. I can ping either from the outside, but they can't ping each other. Traceroutes in and out look the same, and they receive the same gateway over DHCP. I can ping other IPs on the subnet, so I assume this is not any sort of intentional isolation for security/privacy. Since I'm in a setup where my landlord provides internet and we don't have contact with the ISP, I can't really ask the ISP for help (doubt the landlord would know much either.) The situation is similar to the diagram at this question, but instead of the two servers, there's another router coming off the (presumed) switch, and I don't have access to the switch. I've tried giving them static routes to each other with the ISP internet gateway as the gateway, but that's not working. One is a Linksys WRT54GL running DD-WRT, the other is a Netgear WGR614v7, although I could get something more capable if necessary. I'd like to keep them each connected directly to the ISP on their WAN ports, but I can have an ethernet cable between them if necessary - I'm wondering if there's a way without that, and if there isn't, I'd appreciate advice on how to get that working. Sorry this is so nitpicky; there are reasons for all the constraints, but they don't apply to the real question, so I left them out. ;) Thank you!

    Read the article

  • How can I create a VLAN on my extreme switch for a separate subnet/domain?

    - by drpcken
    I'm putting together a small active directory implementation for a buddy of mine. I currently have 2 servers (one is the primary domain controller) and a couple clients. I need to test and run updates on every machine on this domain, but I would have plug them into my current LIVE domain to get it internet access. From what I've read having two separate domains on a single subnet is a bad idea (even though it is temporary) so I don't want to risk messing anything up on my production domain. I'm pretty sure I can create a separate VLAN on my extreme 48 port switch and plug this smaller domain into it on a different subnet, but I don't know the commands. Both subnets would need internet access of course (one of the things I can't wrap my head around is routing internet traffic between subnets (gateway is on production subnet). Switch is a Summit x450e-48p My production domain is on subnet 192.168.200.0. My new domain I want to put online would go into subnet 192.168.10.0. A shove in the right direction would be greatly appreciated. Thank you!

    Read the article

  • Instructions to setup primary and only domain controller

    - by Robert Koritnik
    Where could I get best step by step instructions (with some simple explanations) how to setup domain controller on Windows Server 2008 R2 Server Core? I don't know what do I need? Do I need DNS as well and AD and so on and so forth. I don't know enough about these things, but I need to set them up to prepare development environment. I would also like to know how to configure firewall on DC machine, to make it visible on other machines because I've setup DC somehow but I can't connect to it... This is my HW config: Linksys internet router with DHCP my dev machine is Windows 7 my DC machine is a VM in my dev machine my dev machine has a hw network adapter to linksys and a virtual network adapter to DC DC machine has two network adapters: one to linksys (to be internet connected so it can be updated etc.) and one to host (my dev Win7 machine) Edit My development machine should access domain controller and logon using domain credentials. Development machine would access internet directly via Linksys router. My domain controller machine would only serve authentication (and if I'm able to configure it right) should also have Active Directory Federation Services in a workable condition. I hope this is a bit more clear now. At least a small bit.

    Read the article

  • Possible Solution for Setting up a Linux VPN Server to Encrypt WLAN Traffic of Macs and iPhones on

    - by GorillaPatch
    I would like to set up a VPN server on debian linux to encrypt wireless traffic coming from my Mac or iOS device. I would like to use a certificate-based solution. Setting up a PKI infrastructure and managing certificates is OK for me. 1. Which server to pick? By looking through the internet and here on stackoverflow I found the following possible solutions: strongSwan IPSec and racoon Which solution is feasible for a linode running debian squeeze? 2. How to configure the network? If I understood correctly a VPN has a virtual network interface as an endpoint on the server side. Naively I would think that I need a DHCP server running on the server to assign a dynamic private IP (like of the class C network 192.168.xxx.xxx) to the connecting clients. Next I think I would need to set up masquerading to NAT the incoming VPN traffic to the real interface directly connected to the internet. Is this the right way to go? Do you have any configuration examples? I often saw VPN configurations used to connect to your home network, but that is not what I am looking for. I have a server up in the internet and want to use it as a proxy to encrypt traffic in insecure network environments like public WLANs.

    Read the article

  • How to setup port forwarding from my Webserver (apache) to my Database server (mysql)

    - by karman888
    Hello again guys, and thank you for your help so far. Here is my problem: I have two remote dedicated servers, one webserver that runs apache, and one db server that runs mysql. The apache server is visible on the internet of course, but the second server is only visible to the apache server because they are connected with LAN. I need to connect to the remote mysql server through internet from my home-pc , but only apache server is visible to my home-pc. How can i setup port-forwarding from my apache server to the mysql server so i will be able to "see" the mysql server from my home-pc? This question is a follow-up from my first question Connect to remote mysql server from my application. Problem is that Mysql server is on LAN in which you answered me and helped me a lot by telling me to do "port-forwarding". I looked over the internet, and i cant find a good how-to to do port-forwarding. I'm an experienced programmer, but have little experience on hardware and networks. I can understand though what must be done, so i just need a litle help to sort things out :) I hope you can help me guys, Thank you in advance p.s. machine that Apache is running is on CentOS, mysql server also CentOS. p.s2 webserver runs WebHostManager i dont know if that makes any difference or it can be made easily through this, i just mention it :)

    Read the article

  • How to connect computers to a network printer behind a router?

    - by kokbira
    General question: How to connect computers to an IP printer behind a router? Particular question: How to connect C-1 and C-2 to PRI? What? Where? [ISP] | | -> IPs:200.X.X.X/other configs:DC | [R-1] | | -> IPs:10.1.X.X locked by MAC,M:255.0.0.0,G:10.1.0.1 |¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯| | | [PRI] IP:10.1.7.7 [R-2] IP: 10.1.0.1,MAC:A | | -> IPs:192.168.1.X,M:255.255.255.0,G:192.168.1.1 |¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯| | | [C-1] IP:192.168.1.2 [C-2] IP:192.168.1.3,MAC:A Glossary and details: ------------------------------------------------------------------------------------ - IP: IP. - IPs: Some IP range. - M: Mask. - G: Gateway. - MAC:A: A MAC address that I will not inform you :) - DC: Don't care. - ISP: Internet Service Provider (not so much details about it on that case). - R-1: A real router or some concatenated so IP range bellow that block is 10.1.X.X and above is ISP. The provided IPs are provided by MAC. As all available addresses are in use, you must clone an existing one to join with a new device (and to disconnect the cloned one). - PRI: An network printer (some people here call that IP printer). - R-2: A TP-LINK TL-WR340G, mine wireless router (since my computer does not have ethernet input, it is my ethernet-wifi adapter :), admin access, MAC address cloned from C-2 (MAC:A). I've to configure 10.0.1.1 and 10.0.1.2 as DNS addresses, other wise I cannot connect C-1 and C-2 to Internet. - C-1: My computer, a CCE XLE-425 (remember: no ethernet input), with Windows 7, admin access. - C-2: another computer with better configs than mine, MAC:A, Windows XP. Requirements: I want to print, to access Internet and to do it myself (no need to call network admin men in black people). Pay attention to MAC clones and DNS info.

    Read the article

  • How to monitor bandwidth use of each device on wifi network

    - by GWLlosa
    I have in my home a standard Comcast cable internet connection. I have it going from the wall to a cable modem, and from the modem to a late-series Linksys router, which provides wired and wireless networking. The vast majority of the users are wireless connections. For day-to-day tasks, this connection is fully sufficient for all my needs. However, on regular occassions, we have social gatherings that involve many people bringing laptops and other PCs and using the network and internet simultaneously, frequently for gaming. I have no administrative oversight over these machines; they have been known to be riddled with spyware and/or bloatware or be running torrents, legal or otherwise. The only reason I care is that on a regular basis, one of the machines will flatline my internet bandwith, and consume it all in order to upload/download/spam people/whatever. When this happens, the latency of the connections for gaming and the like becomes unacceptable, and everyone suffers. My question is: Is there a system I can set up whereby I can easily monitor the various systems connected to my wireless connection, see how much bandwith each one is using, and for what ends? That way, at a glance, I can spot the offending machine and kick it from the connection, without having to go from machine to machine, checking each one's "bandwith used" properties manually, and dealing with the owner's indignant protests all the while. I understand this will likely involve 3rd-party software and/or hardware; my issue is I don't even know where to begin.

    Read the article

  • How can I create a VLAN on my extreme switch for a seperate subnet/domain?

    - by drpcken
    I'm putting together a small active directory implementation for a buddy of mine. I currently have 2 servers (one is the primary domain controller) and a couple clients. I need to test and run updates on every machine on this domain, but I would have plug them into my current LIVE domain to get it internet access. From what I've read having two separate domains on a single subnet is a bad idea (even though it is temporary) so I don't want to risk messing anything up on my production domain. I'm pretty sure I can create a separate VLAN on my extreme 48 port switch and plug this smaller domain into it on a different subnet, but I don't know the commands. Both subnets would need internet access of course (one of the things I can't wrap my head around is routing internet traffic between subnets (gateway is on production subnet). My production domain is on subnet 192.168.200.0. My new domain I want to put online would go into subnet 192.168.10.0. A shove in the right direction would be greatly appreciated. Thank you!

    Read the article

  • SSH not working through Double NAT

    - by d_inevitable
    I am trying to setup port forwarding for ssh through 2 NATs The first Router translates my internet IP to my outer network (10.1.7.0). In the outer network there's a second Router that does NAT to my inner network (192.168.1.0). The target server is connected to both, the outer network and the inner network. I cannot change the port forwarding options for outer router. It is currently configured to forward the SSH and HTTP port to the router for the inner network. Internet + | v +-----------------+ +------------------+ | Outer Router | | Inner Router | |-----------------| |------------------| | | SSH HTTP | | +----+ +--------------------->| | | | | | | | | | | | | +-------+---------+ +------+---------+-+ | | | | | | | | | | | | | | +------------------+ | SSH | | | | Server | | | | | |------------------| | | | +-----------> |<-------+ | | | | |HTTP (testing) | +------------------+ | | | +------v------------------+ | | Outer Workstation | +-------------------+ | |-------------------------| | Inner Workstation| | | | |-------------------| | | | | |<----------------+ +-------------------------+ | | +-------------------+ When connecting from a outer workstation to the address of the inner router, then both SSH and HTTP work fine. When connecting from the internet to my public ip with HTTP, the connection works fine as well. However SSH just times out. Most likely because the reply is not routed back properly. I suspect its either because of the SSH itself, or because the server is connected to both, the inner and outer network. Any ideas how I could resolve this issue? The routes on the server are currently: ip route show default via 10.1.7.254 dev eth0 metric 100 10.1.7.0/24 dev eth0 proto kernel scope link src 10.1.7.1 192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.2 Do I have to change this? If so how?

    Read the article

  • Basic connectivity issues between Win 7 and XP mixed wired/wireless network.

    - by Pulse
    Setup: Windows 7 x64 Ultimate desktop hard wired to Asus WL500gp router (WL500gpv2-1.9.2.7-d-r1445 firmware) Several Bridged VirtualBox VM's running XP, 7, ubuntu server 10.04, Mint 9 and SuSE 11.2 Win XP Pro SP3 notebook with D-Link Airplus wireless network card. No firewall or other security software currently running on either platform (at least for the duration of the test) Situation: Router is acting DHCP server Clients are receiving correct addresses and additional parameters Internet connectivity is available from all clients Windows 7 sharing is set to Network type = work (not home group) NetBT is disabled on all clients using smb over TCP What I can do: I can ping the router and internet addresses from the wireless XP notebook I can ping the Win 7 desktop and any VM from the XP wireless notebook I can ping all devices from the router All VM's and 7 can ping each other and the router as well as Internet addresses What I can't do: I cannot ping the XP wireless notebook from either The Win 7 desktop or the VM's it alwats returns a destination host unreachable. Tracert resolves the name or the XP notebook but also returns a destination host unreachable. From the above it would seem that something is blocking connectivity in a single direction (from the Win 7 box to the Win XP notebook) only but the router can ping the XP notebook. Some fresh input would be most welcome, as this is beginning to drive me batty. Thanks

    Read the article

  • How To Monitor Home Wireless Network Connected Devices Bandwith

    - by GWLlosa
    (Originally posted on SuperUser, not sure if it might be better suited here) I have in my home a standard Comcast cable internet connection. I have it going from the wall to a cable modem, and from the modem to a late-series Linksys router, which provides wired and wireless networking. The vast majority of the users are wireless connections. For day-to-day tasks, this connection is fully sufficient for all my needs. However, on regular occassions, we have social gatherings that involve many people bringing laptops and other PCs and using the network and internet simultaneously, frequently for gaming. I have no administrative oversight over these machines; they have been known to be riddled with spyware and/or bloatware or be running torrents, legal or otherwise. The only reason I care is that on a regular basis, one of the machines will flatline my internet bandwith, and consume it all in order to upload/download/spam people/whatever. When this happens, the latency of the connections for gaming and the like becomes unacceptable, and everyone suffers. My question is: Is there a system I can set up whereby I can easily monitor the various systems connected to my wireless connection, see how much bandwith each one is using, and for what ends? That way, at a glance, I can spot the offending machine and kick it from the connection, without having to go from machine to machine, checking each one's "bandwith used" properties manually, and dealing with the owner's indignant protests all the while. I understand this will likely involve 3rd-party software and/or hardware; my issue is I don't even know where to begin.

    Read the article

  • Wireless Access Point stopped working

    - by Alex Pritchard
    I have a simple LAN set up at home using a Linksys WRT54GSV4 as my primary router and an Encore ENHWI-2AN3 as an access point. I connect the Encore to the Linksys by running a cable from one of the Linksys LAN ports into the Encore WAN input. I originally configured this using the Encore setup wizard, setting the device up in AP Router Mode. It detected the input network and worked about as expected, creating a second network that used my primary network to connect to the internet. It worked fine for about 2 weeks, then abruptly cut out today. I checked to make sure the network was still live through the cable going into the Encore (provides internet when connected to a laptop directly) and that devices are still able to connect to the network being broadcast by the Encore. When I try to rerun the connection wizard on the Encore, I receive the message "No Services found in WAN port." The WAN Settings is no longer retrieving a dynamic ip from the line. I tried providing a static IP, assigning an IP address within the subnet range of my primary router that wasn't being used and pointing the Default Gateway to the Linksys IP, but this did not work either. When I plug the cable into the WAN port, an internet light comes on that is not lit when a live network is not connected. I've tried doing a hard reset on the Encore (held down the rest button until the lights flashed, reconfigured from scratch), but the WAN settings are still not detected. Also tried powering off and on the modem, linksys, and encore. Any suggestions would be appreciated!

    Read the article

  • Primary/secondary ethernet interfaces in Ubuntu 9.10

    - by Josh
    I have an Ubuntu 9.10 machine with three ethernet interfaces, eth0, eth1 and eth2. eth2 is connected to a private network. eth0 and eth2 are connected to two different LANs. Either one will provide access to the internet. All three networks have DHCP servers. Using Ubuntu's the default settings (And Gnome), when I boot up all the interfaces are active and my system gets three IP addresses. However any attempt to access the internet results in connection timeouts and other weirdness. I suspect that traffic is going out on one NIC (like eth0) and coming back in on another (like eth1). I'm not sure what's going on. The only way I can access the internet at the moment is to bring two of the devices down with ifdown. How can I configure eth0 as my primary interface so all trafic goes out by default on that interface, while keeping the other two active? Also, I want to make sure Avahi broadcasts properly on all three IPs so that the computers on the LAN of eth1 can still connect to myHostname.local...

    Read the article

  • How to detect/list rogue computers connected to a WIFI network without access to the Wifi Router interface? [migrated]

    - by JJarava
    This is what I believe to be an interesting challenge :) A relative (that leaves a bit too far to go there in person) is complaining that their WIFI/Internet network performance has gone down abysmally lately. She'd like to know if some of the neighbors are using her wifi network to access the internet but she's not too technically savvy. I know that the best way to prevent issues would be to change the Router password, but it's a bit of a PITA having to re-configure all wifi devices... and if the uninvited guest broke the password once, they can do it again... Her wifi router/internet connection is provided by the telco, and remotely managed so she can log-on to their telco account's page and remotely change the router's Wifi password, but doesn't have access to the router status page/config/etc unless she opts out of the telco's remote support and mainteinance service... So, how could she check if there are guests in the wifi with this restrictions and in the most "point and click way"? In this case I'd probably use nmap to look for other devices in the network, but I'm not sure if that's the easiest way to do it. I'm not a wifi expert, so I don't know if there are any wifi-scanning utils that can tell us who's talking to the router... Lastly, she's a Windows user as I guess that'll influence the choice of tools available Any suggestions more than welcome Regards!

    Read the article

  • Uploads fail with shorewall enabled

    - by JamesArmes
    I have an Ubuntu 8.04 server with shorewall 4.0.6 installed. When I try to upload files using FTP, SCP, or cURL the file upload stalls almost immediatly and eventually times out. If I turn off shorewall then the uploads work fine. I don't have any rules that specifically allow FTP and I'm not too concerned with it, but I do need to be able to upload via 22 (SCP) and 80 & 443 (cURL). This is what my rules look like: COMMENT Allow Server to respond to any web (80) and SSL (443) requests ACCEPT net $FW tcp 80 ACCEPT $FW net tcp 80 ACCEPT net $FW tcp 443 ACCEPT $FW net tcp 443 COMMENT Allow Server to respond to SNMPD (161) requests ACCEPT net $FW udp 161 COMMENT Allow Server to respond to MySQL (3306) requests (for MySQL Graphing) ACCEPT net $FW tcp 3306 COMMENT Allow Server to respond to any SSH connection attempts, and to SSH out. SSH/ACCEPT net $FW SSH/ACCEPT $FW net COMMENT Allow Server to make DNS Requests out. DNS/ACCEPT $FW net COMMENT Default "close" anything else. Ping/REJECT net $FW ACCEPT $FW net icmp #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE I expected the top four ACCEPT lines to allow inbound and outbound traffic over 80 and 443 and I expected the two SSH/ACCEPT lines to allow inbound and outbound trffic over 22, including SCP. Any help is greatly appreciated. /etc/shorewall/policy contains the following (all lines above are commented out): # # Allow all connection requests from teh firewall to the internet # $FW net ACCEPT # # Policies for traffic originating from the Internet zone (net) # Drop (ignore) all connection requests from the Internet to the firewall # net all DROP info # THE FOLLOWING POLICY MUST BE LAST # Reject all other connection requests all all REJECT info #LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE

    Read the article

  • HTTPS Proxy which answers CONNECT with own certificate

    - by user1109542
    I'm configuring a DMZ which has the following Scheme: Internet - Server A - Security Appliance - Server B - Intranet In this DMZ I need a Proxy server for http(s) connections from the Intranet to Internet. The Problem is, that all Traffic should be scanned by the Security Appliance. For this I have to terminate the SSL Connection at Server B, proxy it as plain http to Server A through the Security Appliance and then further as https into the Internet. An encryption is then persistent between the Client and Server B and the Target Server and Server A. The communication between Server A and Server B is unencrypted. I know about the security risks and that the client will see some warning about the unknown CA of Server B's certificate. As Software I want to use Apache Web Servers on Server A and Server B. As first step I tried to configure Server B that it serves as endpoint for the SSL Encryption. So it has to establish the encryption with the client (answering HTTP CONNECT). Listen 8443 <VirtualHost *:8443> ProxyRequests On ProxyPreserveHost On AllowCONNECT 443 # SSL ErrorLog logs/ssl_error_log TransferLog logs/ssl_access_log LogLevel debug SSLProxyEngine on SSLProxyMachineCertificateFile /etc/pki/tls/certs/localhost_private_public.crt <Proxy *> Order deny,allow Deny from all Allow from 192.168.0.0/22 </Proxy> </VirtualHost> With this Proxy only the CONNECT request is passed through and an encrypted Connection between the client and the target is established. Unfortunately there is no possibility to configure mod_proxy_connect to decrypt the SSL connection. Is there any possibility to accomplish that kind of proxying with Apache?

    Read the article

  • Basic connectivity issues between Win 7 and XP mixed wired/wireless network. [Solved]

    - by Pulse
    Setup: Windows 7 x64 Ultimate desktop hard wired to Asus WL500gp router (WL500gpv2-1.9.2.7-d-r1445 firmware) Several Bridged VirtualBox VM's running XP, 7, ubuntu server 10.04, Mint 9 and SuSE 11.2 Win XP Pro SP3 notebook with D-Link Airplus wireless network card. No firewall or other security software currently running on either platform (at least for the duration of the test) Situation: Router is acting DHCP server Clients are receiving correct addresses and additional parameters Internet connectivity is available from all clients Windows 7 sharing is set to Network type = work (not home group) NetBT is disabled on all clients using smb over TCP What I can do: I can ping the router and internet addresses from the wireless XP notebook I can ping the Win 7 desktop and any VM from the XP wireless notebook I can ping all devices from the router All VM's and 7 can ping each other and the router as well as Internet addresses What I can't do: I cannot ping the XP wireless notebook from either the Win 7 desktop or the VM's; it always returns a destination host unreachable error. Tracert resolves the name or the XP notebook but also returns a destination host unreachable. From the above it would seem that something is blocking connectivity in a single direction (from the Win 7 box to the Win XP notebook) only but the router can ping the XP notebook. Some fresh input would be most welcome, as this is beginning to drive me batty. Thanks

    Read the article

  • Is it possible to command a common router without using the web interface?

    - by MDeSchaepmeester
    Some background The internet arrangement in my student home is really weird. There is one ethernet outlet and several wifi hotspots. Either way requires a login through a web site to get internet access. This is annoying as each device needs to login seperately and with a PS3 for example, it is impossible to get connected at all since the web login procedure doesn't work. Therefore I have installed a D-Link DIR-635 router which is connected to the ethernet outlet. It has DHCP enabled so it uses NAT, but whatever it is connected to also uses NAT and I've read this should not work. A fellow student tried it with an Apple Airport but that keeps giving errors related to NAT after NAT. Anyway my setup does work so bonus points if you can clarify this. I need to login to the web site I mentioned earlier with any device, after which all devices in my LAN have connectivity. This is great. Except... In short From time to time, I lose internet connectivity and my D-Link DIR-635 router needs to do a DHCP renew. I can do this via the web interface but my life would be easier if I could just run a cmd file which tells my router to do this without all the hassle. This would setup a connection to my router and execute the proper command. I have tried googling but couldn't find much helpful stuff.

    Read the article

  • Route outbound connections from local network through VPN

    - by Sharkos
    I have a server A running OpenVPN, an OpenVPN client B (a rooted Android phone as it happens) and a third party C (a laptop, tablet etc.) tethered to B. B can use the VPN to access the internet via A; C can use the tethered connection WITHOUT the VPN to access the internet via B. However, with the VPN on B active, I cannot load information from the internet on C. A appears to log similar traffic inbound and outbound when B or C attempt to load a webpage, say, but the VPN on device B reports no inbound traffic when the connection originated from C. Where should I look for packets being dropped, and what ip rules should I use to make sure they are passed back through the VPN and into the local network B <- C? (I'll obviously post whatever further information is needed.) Further info Without VPN: root@android:/ # ip route default via [B's External Gateway] dev rmnet0 [B's External Subnet] dev rmnet0 proto kernel scope link src [B's External IP] [B's External Gateway] dev rmnet0 scope link 192.168.43.0/24 dev wlan0 proto kernel scope link src 192.168.43.1 With VPN: root@android:/ # ip route 0.0.0.0/1 dev tun0 scope link default via [B's External Gateway] dev rmnet0 [B's External Subnet] dev rmnet0 proto kernel scope link src [B's External IP] [B's External Gateway] dev rmnet0 scope link [External address of A] dev tun0 scope link 128.0.0.0/1 dev tun0 scope link 172.16.0.0/24 dev tun0 scope link 172.16.0.8/30 dev tun0 proto kernel scope link src 172.16.0.10 192.168.43.0/24 dev wlan0 proto kernel scope link src 192.168.43.1 192.168.168.0/24 dev tun0 scope link

    Read the article

  • Router as primary DNS server, Server as alternate? (or vice versa)

    - by Jakobud
    We have a very small business network, with a typical cable modem hooked into a DD-WRT router. We also run a basic CentOS server that does a variety of things, including acting as the primary DNS server for the office. The reason we need an internal DNS server is because we do a lot of internal web development and use the DNS server to add/remove various local network URLs for internal website testing (like www.testsite.com.local). It's very important for us to be able to add/remove URL aliases easily to the DNS. The problem with this setup is that if we ever need to restart the CentOS server or take it offline for upgrades or whatever, then internet access for all computers on the network is lost. That's because each computer relies on that DNS server to access the Internet I guess? The router is online all the time and very very rarely has to be restarted. It would be nice if we could setup my router to be the primary DNS server but still be running DNS on my server. So we could still add my local testing website URLs to the DNS server in CentOS, but be able to also take down the CentOS server without loosing Internet access on the network. How would this be setup? Would I simply need to add both router + server IP addresses to each computer's IP settings? Is the router primary DNS and server secondary DNS server? Or vice versa? Or can one of the two serve as a fallback for the other? What (if anything) needs to be configured on both the router and server in order for them to recognize that the other DNS server exists on the network? Does anyone have any newb-friendly resources for setting up something like this?

    Read the article

  • Need solution for Network/Servers.

    - by rehanplus
    Dear All, Please help me. I just joined a new Hospital and want some help managing my network. There are some requirements: Current Network: There is a D.S.L connection and that is terminated on a LINUX proxy and then connected to D-Link layer 2 switches and then providing internet to more then 200 PC's (Would be increasing to 1500 in couple of months). D-Link switches are not configured yet. Also there is one Database server Report server and an application server. In near Future Application should be accessed by local users as well as remote users from internet via our web server. We do have a sharing server and all these servers databases and PC's are on single sub net. Required Network: All i do want is to secure my network from outside access and just allowing specific users via web application and they will be submitting there record for patient card and appointment facility by means of application and entering there record (on our database) but not violating our network resources. Secondly in house users also need to access the same application and also internet but they must have some unique identity and rights (i.e. Finance lab dept. peoples do have limited access to that application). Notes: Should i create V LAN or break sub nets. Having a firewall will solve my issues? is a router needed on these type of scenario's. Currently all the access are restricted from Linux Proxy. Thanks.

    Read the article

  • Wireless connection silently dies randomly

    - by Force Flow
    I have two WAP4410N wireless access points powered using Power-Over-Ethernet. They are both connected to the same LAN and broadcasting the same SSID with a WPA2 password. One is using channel 1, while the other is using channel 11. There is coverage overlap where the signal from both access points hover around -75db to -85db while standing in the same physical location. DHCP is disabled, and is being provided by another network device. Every day or so, devices can connect and authenticate to the access points, but are not granted an IP address (and subsequently are unable access to the LAN or Internet). For devices that had already retrieved an IP address prior to the issue exhibiting itself, the devices simply stop communicating with LAN and Internet. However, I can still access each access point's web admin interface from the LAN. If I reboot both devices, the problem vanishes and devices are once again able to get an IP address and connect to the LAN and Internet. Are these symptoms of signal interference between the two WAPs or is this a completely different issue?

    Read the article

  • CodePlex Daily Summary for Tuesday, May 04, 2010

    CodePlex Daily Summary for Tuesday, May 04, 2010New ProjectsAlbum photo de club - Club's Photos Album: Un album photos permettant d'afficher les photos et le détails des membres d'un club - Photo album allowing to view photos and details of the membersBlog.Net Blogging Components: Blog.Net server-side blogging components to add a blog to your current ASP.NET website.FilePirate - Really Advanced LAN File Sharing: Really Advanced, yet super easy, LAN Party File Sharing written using the .Net Framework and C#. Ditch DirectConnect or Windows File Sharing at y...Fisiogest: Programa de gestión de una clínica de fisioterapiaIdeaNMR: An online repository of NMR experiment automated setups with wiki type documentation library and client program providing automated experiment setu...Introducción a Unity: Código de ejemplo del uso de Unity en diferentes situaciones. - Registro de clases, instancias e interfaces. - Resolución de clases, instancias e...Iowa City .NET Developers: This is the project site for the Iowa City .NET Developers.isanywhere: A command line utility to see if one or more files (given a filemask) are to be found anywhere inside a specific directory, or elsewhere inside one...LczCode: lczLog4net udp logs viewer: UdpLogViewer is a .NET 4 WinForm application that receives udp messages from log4net and shows them in a grid. It is possible to filter them or sh...New Silverlight XPS Viewer (In Sl4): New Silverlight XPS viewer Novuz: Novuz is a usenet indexer and reporter. It's developed both in Visual Studio 2010 and MonoDevelop, one of the key features of Novuz is that it sho...PodSnatch: PodSnatch is a podcast client that makes it easy to download rss-enclosures. Multiple simultaneous downloads enabled by threading. GUI is built wi...Robot Shootans: A simple top down shooter game where the player has to kill robots running at them. Written in C++ using SDL with various extentionsSharePoint Rsync List: This program will syncronize files and directories from and unc/local/sharepoint to a SharePoint 2007 or 2010 server. Supports of to 2GB files and ...SignInAndStorageLib: SignInAndStorageLib makes properly handling both sign in and storage issues in Xbox 360 XBLIG XNA games simple. Written in C#, SignInAndStorageLib...SilverBBS: ANSI-style bbs experience delivered via Silverlight. Silverlight flip-down counter: A Silverlight widget that enables you to count down towards a preconfigured event on a configured date.SmartieFly: Smartie Fly is a quiz software program written in C# using Silverlight. It uses SQL Server as a backend database. VS2010 Framework Driven Testing: CodedUITests generate a lot of code, and they break on every change to the object under test. Goals: - write new tests manually, but with as litt...WMediaCatalog: Advanced multimedia cataloguer. Allows users to keep their musical collections well organized and provides flexible methods of filtering, serarching WPathFinder: A simple path management application for windows. Functionality includes: - Add/remove/change path entries easily. - Search for all instances of a...Yasminoku: Yasminoku is an open source "Sudoku" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses mouse. Includes sudoku solver. This c...New ReleasesAlbum photo de club - Club's Photos Album: App - version 0.4: version 0.4 - Critère d'affichage des membres : nom, année, ville - Navigation entre les images d'un membres - Navigation entre les membres - Affi...Album photo de club - Club's Photos Album: Code - Version 0.4: Code source de la version 0.4BigDecimal: Concept Evaluation Release 2 (BigDecimals): This in the second updates release of BigDecimals. It has the four simple arithmetic rules Addition, Subtract, Multiple and Division.CBM-Command: 2010-05-03: New features in this build Keyboard Shortcuts Panel Swapping Panel Toggling On/Off Toggling 40/80 Columns Confirming Quit Confirming GO64...Directory Linker: Directory Linker 2: This release introduces Undo Support and Symbolic File Link support. More details can be found here http://www.humblecoder.co.uk/?p=141DotNetNuke Skins Pack: DotNetNuke 80 Skins Pack: This released is the first for DNN 4 & 5 with Skin Token Design (legacy skin support on DNN 4 & 5)DTLoggedExec: 1.0.0.0: -FIRST NON-BETA RELEASE! :) -Code cleaned up -Added SetPackageInfo method to ILogProvider interface to make easier future improvements -Deprecated...GenerateTypedBamApi: Version 2.1: Changes in this release: NEW: Support for Office Data Connectivity Components 2010 NEW: Include both x86 and x64 EXE's due to lack of support in ...HobbyBrew Mobile: Beta 1 Refresh: Risolto bug circa il salvataggio di ricette (veniva impostato scorrettamente che si trattava di Mash Design "infusione" se ri-aperte con hobbyBrew)...Home Access Plus+: v4.2: Version 4.2 Added Overrides into the Booking System Some slight CSS changes to the Help Desk Updated the config tool to work anywhere on the LA...Hubble.Net - Open source full-text search database: V0.8.3.0: V0.8.3.0 Show server version in about dialog. Fix a bug of deleting querycache files. V0.8.2.9 Change sql client to support userid and password Ch...IdeaNMR: IdeaNMR Client: This is a client program with an example package.kdar: KDAR 0.0.21: KDAR - Kernel Debugger Anti Rootkit - signature's bases updated - usability increased - NDIS6 MINIPORT_BLOCK checks addedLightWeight Application Server: 0.4.1: One step further to beta - yet another release for c# developers audience only. Changes: 1. API - added a LWAS.Infrastructure.Storage service to d...Log4net udp logs viewer: UdpLogViewer 1.0: First release of UdpLogViewer, version 1.0.MDownloader: MDownloader-0.15.11.58370: Fixed minor bugs.Metabolite Enterprise Libraries for EPiServer CMS using Page Type Builder: Metabolite Enterprise Libraries 1.2 Beta 2: This is the beta release of the Metabolite Enterprise Libraries 1.2 Beta 2 for use with EPiServer 6 and Page Type Builder 1.2 Beta 2.Microsoft Silverlight Analytics Framework: Version 1.4.3 Installer: Pre-release Installer for Visual Studio 2010 and Expression Blend 4 RCSupports both Silverlight 3 and Silverlight 4 Release NotesFixed null referen...MultipointTUIO: Multipoint SDK v1.5 Release: Rebuilt against v1.5 of the Microsoft Multipoint SDK, this mean Windows 7 support (and 64bit I think!)My Notepad: My Notepad: This is the status of My Notepad until now. This is many built in features but has to undergo a lot of modifications. The release does not include ...New Silverlight XPS Viewer (In Sl4): Silverlight XPS Viewer: Background: During my development last week I was working on a Silverlight based XPS viewer. During this viewer we came to a situation in which the...NSIS Autorun: NSIS Autorun 0.1.6: This release includes source code, executable binary, files and example materials.Open Diagram: Open Diagram 5.0 Beta May 2010: This is the first beta release of Open Diagram 5.0. Select Crainiate.Diagramming.Examples.Forms as the startup project to view the current Class D...Pocket Wiki: PC Wiki (zip) 1.0.1: PC Version of Pocket Wiki. Unzip and run. Requires .NET Framework 2.0Pocket Wiki: Pocket Wiki 1.0.1 (cab): Pocket Wiki cab installation - requires DotNet 2.0 or greater. Default wiki language is "slash" - a syntax I created that is easy to type on keyboa...Pocket Wiki: Pocket Wiki.sbp: Pocket Wiki Source Code (version .72) - Basic4PPCPublish to Photo Frame: 1.0.2.0: This version adds: add borders to portrait images, for photo frames that crop them incorrectly.Reflection Studio: Reflection Studio 0.1: First download release, it contains a lot of things but allways in beta version. Hope you will like the preview.SharePoint 2010 PowerShell Scripts & Utilities: PSSP2010 Utils 0.1: This is the initial release with SPInstallUtils.psm1 module. This module includes Get-SPPrerequisites and New-SPInstallPackage cmdlets. Refer to th...Silverlight 4.0 Popup Menu: Context Menu for Silverlight 4.0 v1.1 Beta: Multilevel menus are now supported. Added design time support for the PopupMenuItem elements. The project is now under Subversion.Silverlight flip-down counter: FlipDownCounter v1.0: The final release of the Silverlight flip-down counter. Please refer to the included readme file for information on how to use the counter.Stratosphere: Stratosphere 1.0.0.1: Moved scalable block file system implementation to Stratosphere.FileSystemSystem.AddIn Pipeline Builder: Pipeline Builder 1.2: Lots of improvements from the CTP, version 1.0: - Added dialogue for possible overwrite if the file has changed: possibility of ignoring changes (p...ThoughtWorks Cruise Notification Interceptor: 1.0.1: Fixed an issue with the regex that parses the incoming notification. This issue would send failure messages when the build was "fixed".ThreadSafeControls: ThreadSafeControls v0.1: This is the first binary release of the ThreadSafeControls library. I'll call it a pre-alpha release.TracerX Logger/Viewer for .NET: 4.0: View this CodeProject article for documentation on how to use the latest version of the Logger. About the DownloadsVersion: 4.0.1005.1163 Changese...VCC: Latest build, v2.1.30503.0: Automatic drop of latest buildVisual Studio DSite: Lottery Game (Visual C++ 2008): An advanced lottery game made in visual c 2008.VivoSocial: VivoSocial 7.1.3: Version 7.1.3 of VivoSocial has been released. If you experienced any issues with the previous version, please update your modules to the 7.1.3 rel...Xrns2XMod: Xrns2XMod 1.0: Features added Conversion of all possible convertible features between Renoise and MOD / XM. FlacBox lib updated (thanks to Yuri) NAudio lib in...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: Databasepatterns & practices – Enterprise LibrarySilverlight ToolkitiTuner - The iTunes CompanionWindows Presentation Foundation (WPF)ASP.NETDotNetNuke® Community EditionMost Active ProjectsIonics Isapi Rewrite Filterpatterns & practices – Enterprise LibraryRawrHydroServer - CUAHSI Hydrologic Information System ServerAJAX Control Frameworkpatterns & practices: Azure Security GuidanceNB_Store - Free DotNetNuke Ecommerce Catalog ModuleBlogEngine.NETTinyProjectDambach Linear Algebra Framework

    Read the article

  • This is the End of Business as Usual...

    - by Michael Snow
    This week, we'll be hosting our last Social Business Thought Leader Series Webcast for 2012. Our featured guest this week will be Brian Solis of Altimeter Group. As we've been going through the preparations for Brian's webcast, it became very clear that an hour's time is barely scraping the surface of the depth of Brian's insights and analysis. Accordingly, in the spirit of sharing Brian's perspective for all of our readers, we'll be featuring guest posts all this week pulled from Brian's larger collection of blog postings on his own website. If you like what you've read here this week, we highly recommend digging deeper into his tome of wisdom. Guest Post by Brian Solis, Analyst, Altimeter Group as originally featured on his site with the minor change of the video addition at the beginning of the post. This is the End of Business as Usual and the Beginning of a New Era of Relevance - Brian Solis, Principal Analyst, Altimeter Group The Times They Are A-Changin’ Come gather ’round people Wherever you roam And admit that the waters Around you have grown And accept it that soon You’ll be drenched to the bone If your time to you Is worth savin’ Then you better start swimmin’ Or you’ll sink like a stone For the times they are a-changin’. - Bob Dylan I’m sure you are wondering why I chose lyrics to open this article. If you skimmed through them, stop here for a moment. Go back through the Dylan’s words and take your time. Carefully read, and feel, what it is he’s saying and savor the moment to connect the meaning of his words to the challenges you face today. His message is as important and true today as it was when they were first written in 1964. The tide is indeed once again turning. And even though the 60s now live in the history books, right here, right now, Dylan is telling us once again that this is our time to not only sink or swim, but to do something amazing. This is your time. This is our time. But, these times are different and what comes next is difficult to grasp. How people communicate. How people learn and share. How people make decisions. Everything is different now. Think about this…you’re reading this article because it was sent to you via email. Yet more people spend their online time in social networks than they do in email. Duh. According to Nielsen, of the total time spent online 22.5% are connecting and communicating in social networks. To put that in perspective, the time spent in the likes of Facebook, Twitter, and Youtube is greater than online gaming at 9.8%, email at 7.6% and search at 4%. Imagine for a moment if you and I were connected to one another in Facebook, which just so happens to be the largest social network in the world. How big? Well, Facebook is the size today of the entire Internet in 2004. There are over 1 billion people friending, Liking, commenting, sharing, and engaging in Facebook…that’s roughly 12% of the world’s population. Twitter has over 200 million users. Ever hear of tumblr? More time is spent on this popular microblogging community than Twitter. The point is that the landscape for communication and all that’s affected by human interaction is profoundly different than how you and I learned, shared or talked to one another yesterday. This transformation is only becoming more pervasive and, it’s not going back. Survival of the Fitting But social media is just one of the channels we can use to reach people. I must be honest. I’m as much a part of tomorrow as I am of yesteryear. It’s why I spend all of my time researching the evolution of media and its impact on business and culture. Because of you, I share everything I learn in newsletters, emails, blogs, Youtube videos, and also traditional books. I’m dedicated to helping everyone not only understand, but grasp the change that’s before you. Technologies such as social, mobile, virtual, augmented, et al compel us adapt our story and value proposition and extend our reach to be part of communities we don’t realize exist. The people who will keep you in business or running tomorrow are the very people you’re not reaching today. Before you continue to read on, allow me to clarify my point of view. My inspiration for writing this is to help you augment, not necessarily replace, the programs you’re running today. We must still reach those whom matter to us in the ways they prefer to be engaged. To reach what I call the connected consumer of Geneeration-C we must too reach them in the ways they wish to be engaged. And in all of my work, how they connect, talk to one another, influence others, and make decisions are not at all like the traditional consumers of the past. Nor are they merely the kids…the Millennial. Connected consumers are representative across every age group and demographic. As you can see, use of social networks, media sharing sites, microblogs, blogs, etc. equally span across Gen Y, Gen X, and Baby Boomers. The DNA of connected customers is indiscriminant of age or any other demographic for that matter. This is more about psychographics, the linkage of people through common interests (than it is their age, gender, education, nationality or level of income. Once someone is introduced to the marvels of connectedness, the sensation becomes a contagion. It touches and affects everyone. And, that’s why this isn’t going anywhere but normalcy. Social networking isn’t just about telling people what you’re doing. Nor is it just about generic, meaningless conversation. Today’s connected consumer is incredibly influential. They’re connected to hundreds and even thousands of other like-minded people. What they experiences, what they support, it’s shared throughout these networks and as information travels, it shapes and steers impressions, decisions, and experiences of others. For example, if we revisit the Nielsen research, we get an idea of just how big this is becoming. 75% spend heavily on music. How does that translate to the arts? I’d imagine the number is equally impressive. If 53% follow their favorite brand or organization, imagine what’s possible. Just like this email list that connects us, connections in social networks are powerful. The difference is however, that people spend more time in social networks than they do in email. Everything begins with an understanding of the “5 W’s and H.E.” – Who, What, When, Where, How, and to What Extent? The data that comes back tells you which networks are important to the people you’re trying to reach, how they connect, what they share, what they value, and how to connect with them. From there, your next steps are to create a community strategy that extends your mission, vision, and value and it align it with the interests, behavior, and values of those you wish to reach and galvanize. To help, I’ve prepared an action list for you, otherwise known as the 10 Steps Toward New Relevance: 1. Answer why you should engage in social networks and why anyone would want to engage with you 2. Observe what brings them together and define how you can add value to the conversation 3. Identify the influential voices that matter to your world, recognize what’s important to them, and find a way to start a dialogue that can foster a meaningful and mutually beneficial relationship 4. Study the best practices of not just organizations like yours, but also those who are successfully reaching the type of people you’re trying to reach – it’s benching marking against competitors and benchmarking against undefined opportunities 5. Translate all you’ve learned into a convincing presentation written to demonstrate tangible opportunity to your executive board, make the case through numbers, trends, data, insights – understanding they have no idea what’s going on out there and you are both the scout and the navigator (start with a recommended pilot so everyone can learn together) 6. Listen to what they’re saying and develop a process to learn from activity and adapt to interests and steer engagement based on insights 7. Recognize how they use social media and innovate based on what you observe to captivate their attention 8. Align your objectives with their objectives. If you’re unsure of what they’re looking for…ask 9. Invest in the development of content, engagement 10. Build a community, invest in values, spark meaningful dialogue, and offer tangible value…the kind of value they can’t get anywhere else. Take advantage of the medium and the opportunity! The reality is that we live and compete in a perpetual era of Digital Darwinism, the evolution of consumer behavior when society and technology evolve faster than our ability to adapt. This is why it’s our time to alter our course. We must connect with those who are defining the future of engagement, commerce, business, and how the arts are appreciated and supported. Even though it is the end of business as usual, it is the beginning of a new age of opportunity. The consumer revolution is already underway, and the question is: How do you better understand the role you play in this production as a connected or social consumer as well as business professional? Again, this is your time to define a new era of engagement and relevance. Originally written for The National Arts Marketing Project Connect with Brian via: Twitter | LinkedIn | Facebook | Google+ --- Note from Michael: If you really like this post above - check out Brian's TEDTalk and his thought process for preparing it in this post: 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} http://www.briansolis.com/2012/10/tedtalk-reinventing-consumer-capitalism-screw-business-as-usual/

    Read the article

  • Jagran Prakashan Increases Staff Productivity by 40%

    - by Michael Snow
    Jagran Prakashan Increases Staff Productivity by 40%, Launches New IT Projects up to 4x Faster, Enables Mobile Service, and Improves Business Agility Oracle Customer: JPL Location:  Uttar Pradesh, India Industry: Media and Entertainment Employees:  10,000 Annual Revenue:  $100 to $500 Million Jagran Prakashan Ltd. (JPL) is one of India's premier media and communications groups with interests spanning print, advertising, event management, and mobile services for weather, cricket scores, and educational activities. It is a major media enterprise, with 300 locations across 15 states. Its impressive stable of print publications includes Dainik Jagran, the world’s most widely read daily newspaper––with a readership of over 55 million––the country’s leading afternoon dailies, and a range of popular local, bilingual, and English language newspapers. JPL was using multiple systems to manage its business processes. Users were resistant to using multiple passwords for various applications, preferring to continue their less efficient, legacy work practices. In addition, there was no single repository for sharing documents across the organization, such as company announcements or project documents. The company relied on e-mail to disseminate up-to-date company information, often missing employees. It was also time-consuming and difficult for managers to track the status of ongoing assignments or projects because collaboration and document sharing was inefficient and ineffective.With diverse businesses and many geographic locations, JPL needed to implement a centralized and user-friendly enterprise portal to improve document sharing and collaboration and increase business agility. The company implemented Oracle WebCenter Portal to create a dynamic, secure, and intuitive self-service enterprise portal to improve the user experience and increase operating efficiency. It improved staff productivity by 40%, accelerated new IT projects by up to 4x, boosted staff morale, and increased business agility.   Increases Staff Productivity by 40%, Launches New Products up to 2x Faster A word from JPL "With Oracle WebCenter Portal, we gained a dynamic, secure, and intuitive self-service enterprise portal that provided an exceptional user experience and enabled us to engage employees in a collaborative environment. It increased IT staff productivity by 40%, delivered new projects up to 4x faster, and enabled mobile service to improve our business agility.” Sarbani Bhatia, Vice President IT, Jagran Prakashahn Ltd Before implementing Oracle WebCenter Portal, JPL stored project-critical information, such as page planning of daily newspaper editions and the launch of new editions or supplements on individual laptops or in the e-mail system. Collaboration between colleagues was limited to physical meetings, telephone discussions, and e-mail. It was difficult to trace and recover important project documents when a staff member resigned, which represented a significant risk to business continuity. Employees were also averse to multiple passwords and resisted using the systems, affecting staff productivity. With Oracle WebCenter Portal, JPL created a dynamic, secure, and intuitive self-service enterprise portal with business activity streams. The portal allowed users to navigate, discover, and access information, such as advertising rates, requisition approvals, ad-hoc queries, and employee surveys from a single entry point with a single password. Managers can also upload important documents, such as new pricing for advertisers or newspaper distributors, and share them through the information and instruction section in the portal. In addition, managers can now easily track and review timelines for projects online rather than gathering information from meetings and e-mails. The company gained the ability to centrally manage information, ensured business continuity, and improved staff productivity by 40%.“In the media industry, news has a very short shelf life, so speed is crucial. Information delayed is like information lost,” said Sarbani Bhatia, vice president IT, Jagran Prakashahn Ltd. “Thanks to Oracle WebCenter Portal’s contextual collaboration tools, we can provide and share feedback for new project launches, such as career or education supplements, up to 2x faster through discussion forums or knowledge groups. Tasks that previously required four months, we now complete in one month.”In addition, the company can broadcast announcements, flash employee birthdays, and promote important events through the message section on the webpage, instead of using the e-mail system. The company can also conduct opinion polls to gauge employee response to organizational issues and improve management decision-making.“With over 10,000 employees across 300 locations, it is critical for management to hear the voice of employees and develop a cohesive organizational culture. Oracle WebCenter Portal enables employees to engage with business processes and systems in a collaborative environment, providing users with an exceptional experience,” Bhatia said. Enables Mobility Access and Increases Business Agility Newspaper advertisements generate the majority of JPL’s revenue. With most sales staff on the move, the company needed to ensure timely approval of print advertisement discounts for specific clients and meet tight publication deadlines.  By integrating Oracle WebCenter Portal seamlessly with its enterprise resource planning (ERP) system and other applications, such as the organizational mass mailing system, business intelligence, and management information system, JPL embedded its approval workflow processes into the enterprise portal and provided users with an integrated and intuitive interface. About 30% of JPL’s sales staff members now have tablets and receive advertising discount approval from managers while in the field and no longer need to return to the office, which has significantly improved efficiency and increased business agility.“Application mobility was critical for sales representatives in the field to meet stringent auditing requirements for online accountability, particularly for our newspaper advertising business. Staff member satisfaction has improved significantly now that the sales team can use tablets to access the portal––a capability we will extend to smart phones in the second stage of the implementation,” Bhatia said. Accelerates Application Development by up to 4x and Cuts Costs by up to 60% With Oracle WebCenter Portal, users can easily create, modify, and upload information to their personalized webpages without IT assistance. By seamlessly integrating Oracle WebCenter Portal with the payroll database, managers can decide which members of their team can access the page and with whom they will share information, a decision based on role or geographical location. A sales representative selling advertising space for a local language daily newspaper, for example, can upload an updated advertising rate relevant only to that particular publication. Users can also easily adapt to the new platform, thanks to its intuitive design and look, reducing the need for training and lowering resistance to using the system.Using Oracle WebCenter Portal’s out-of-the-box reusable components, such as portal pages and templates, provided JPL’s developers with a comprehensive and flexible user experience platform and increased the speed of application development. In less than five months, JPL developed more than 55 workflows. The IT team accelerated deployment of new applications by up to 4x, as they do not need to install them on individual machines now that they have a web-based environment.   “Previously, we would have spent a whole day deploying a new application for each department or location. With a browser-based environment, we have cut costs by up to 60% by reducing deployment time to zero, because our IT team can roll out a new application from a single point, thanks to Oracle WebCenter Portal,” Bhatia said. Challenges Provide a dynamic, secure, and intuitive self-service enterprise portal to improve staff productivity and ensure business continuity Enable seamless integration with multiple enterprise applications to improve workflow efficiency—including approval of print advertisement discounts—and increase business agility Improve engagement with employees and enable collaboration to enhance management decision-making Accelerate time-to-market for new services, such as new advertising programs Solutions Oracle Product and ServicesOracle WebCenter Portal 11g Increased staff productivity by 40% and enhanced user satisfaction by enabling employees to easily navigate, discover, and access information from a single, self-service enterprise portal without IT assistance Launched new products, such as career or education supplements, up to 2x faster by enabling peer collaboration and incorporating feedback generated through discussion forums, thanks to Oracle WebCenter Portal’s out-of-the-box collaboration tools Accelerated application development up to 4x by enabling developers to optimize reusable components for managing and deploying new applications in a browser-based environment rather than spending one day to install applications for each department, cutting costs by up to 60% Ensured business continuity by enabling managers to easily track and review project timelines online rather than storing important documents on individual laptops or relying on the e-mail system Increased business agility and operational efficiency by seamlessly integrating with the in-house, ERP system and embedding business processes into a single portal Boosted company revenue by enabling sales team members to submit print-advertising discount requests through mobile devices instead of waiting to return to office, ensuring timely approval from managers to meet tight publication deadlines Improved management decision-making by enabling employees to easily share and access feedback through opinion polls or forums, boosting staff morale Introduced the single sign-on capability and enhanced security by enabling managers to decide access level for staff members based on role or geographical location Reduced the need for staff training and minimized user resistance to systems by providing a dynamic and intuitive user experience Why Oracle JPL did not consider other products because the company was already using Oracle Database, Enterprise Edition with Real Application Clusters and had a positive experience with Oracle. JPL chose Oracle WebCenter Portal to ensure no compatibility issues for integration with its existing Oracle products and to take advantage of the experience and support of a reputable vendor to ensure business continuity. “We chose Oracle because we knew we could rely on its support and experience. In addition, Oracle WebCenter Portal’s speed, agility, and mobile access features were a perfect fit for our business requirements,” Bhatia said. Implementation Process JPL launched the enterprise portal to 500 users in the first phase of the project, and plans to extend this to 2,000 users when the portal is fully launched. Oracle partner PricewaterhouseCoopers used Oracle Application Development Framework for the intial set-up, user training and to develop and design sample workflows. JPL’s internal IT staff then took charge of the implementation, bringing it to completion on budget. Partner Oracle PartnerPricewaterhouseCoopers (India)

    Read the article

< Previous Page | 434 435 436 437 438 439 440 441 442 443 444 445  | Next Page >