Search Results

Search found 27891 results on 1116 pages for 'boot options menu'.

Page 44/1116 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• Temporary boot problem after thunder storm - likely causes?

  - by alastairs

  The village where I live was sat under a thunder cloud for most of Friday, and we suffered a few power fluctuations (specifically, what seemed to be split-second outages). When I got back home from work, I found that my PCs had shut down during one of these outages. When I went to boot one of them back up, I couldn't get anything to display on screen, nor did the boot seem to complete correctly. I tried a number of things - unplugging different bits of hardware, swapping graphics adaptors, etc. - to no avail. I thought I was looking at a fried motherboard or CPU. Power seemed to be distributed correctly to the peripherals (the drives all appeared to be working) so I figured it couldn't be the PSU. Eventually I unplugged it from the mains and left it overnight (approx 12hrs unplugged). I tried it again this morning, and it booted up correctly. Woo-hoo! I have all my equipment protected by surge-protected power strips, so I don't think a spike caused these problems. Obviously it has something to do with the power fluctuations, and maybe the PSU in the problem machine got itself confused somehow. The questions are, for future reference and to help people with similar problems: What are the likely causes of the boot failure I experienced? Is a UPS a simple and cost-effective solution, or might other things help prevent this happening in future? What UPS can you recommend (my budget is limited)?

  Read the article

• Laptop will not boot

  - by WillumMaguire

  This is a dell studio 1558 laptop. Now, something is wrong with the charger that it won't charge the laptop, but the laptop can turn on and operate properly as long as it is attached. It has been like this for a while, but it's not the problem. My problem is that as of yesterday, It takes several minutes to get past the "dell" startup logo (where is says "f2 setup" and "f12 boot options"). After it gets past, it beeps as normal to tell me about the charger and gives me the f2/f12 options and f1 to continue as normal. I can press f12 to get into boot options and load into my live USB BackTrack 5 ISO, but after "startx" it just stays at a black screen. I can also access BIOS setup, but see nothing that would help the problem. When I boot to the HDD, it gives me this Intel UNDI, PXE-2.1 (build 083) Realktek PCIe GBE Family Controller Series V.2.29 (06/30/09) PXE-E61: Media test failure, check cable PXE-M0F: Exiting PXE ROM Operating System not found Also, pressing f8 gives me the same results as booting as normal. It is running Windows 7 Ultimate, dual-core Intel i3 @ 2.27ghz and 4gb RAM. I think there is an issue with the HDD, as the "Operating System not found" would lead me to believe. Is this a fixable problem?

  Read the article

• Windows 8.1 - Won't boot (0xc000000f), bcdedit fails

  - by user3014097

  I’m pretty much stuck at this point. So, backstory: Windows was installed on one of the SSDs currently in my tower. I bought a new SSD to install Windows (8.1 64 bit) on. Windows installation went fine, booted up, and formatted the old SSD from within Windows (this seems to have been a mistake, but I didn’t realize that at the time). Despite formatting the old SSD, whenever I tried to boot I was told that there were 2 Windows installations. Apparently, when I formatted the old drive, not all of the partitions were removed. So, I booted up with the repair utility, went into cmd, and deleted the non-primary partitions on the old SSD (there were 2 – think they were system and recovery, although I’m forgetting now). Reboot – computer won’t boot. Getting the 0xc000000f “The boot selection failed because a required device is inaccessible” error. Troubleshooting so far: Automatic repair doesn’t fix anything (I’ve never had luck with it though) If I go to install a new version of Windows, the drives and partitions are all there. The SSD is functioning, I at least know that. I’ve essentially gone through this guide: https://neosmart.net/wiki/recovering-windows-bootloader/ Unfortunately, I’m not getting anywhere. I’m not even entirely sure how to describe the errors I’m getting, so I’ve just included pictures of every step (I can't actually post them though so I just included a photobucket link). http://s319.photobucket.com/user/DGalt11/library/Computer%20Issue Am I completely screwed here (i.e. reformat and reinstall?)? Thanks

  Read the article

• Boot sequence unlike reboot

  - by samgoody

  When I turn on the computer it acts very differently than when I reboot it. [WinXP Pro, Intel Core2 6600, 2.4GHZ, 2GB RAM, NVIDA GeForce] Boot: Monitor must be plugged into the motherboard or no image. Screen resolution 800x600. Changes to the resolution cause only the top half of the screen to be usable, and are lost when I shut down the computer. Desktop icons arranged in neat rows on left of desktop. Nothing of note in system tray In Device Manger - Display adapter: Intel(R) Q965/Q963 Express Chipset Family In Device Manger - Monitors, two monitors are listed Hibernate and standby work. Reboot: Monitor must be plugged into the graphics card or no image. Screen resolution - 1280x1024 Desktop icons arranged in the cute circle that I put them in. NVIDIA icon shows in system tray. In Device Manger - Display adapter: NVIDA GeForce 6200LE In Device Manger - Monitors, one monitor is listed Hibernate and standby do not work. When awakened after a hibernation it says: The system could not be restarted from its previous location because the restoration image is corrupt. Delete restoration data & proceed to system boot? Double reboot (inconsistent): Monitor must be plugged into the graphics card. Screen resolution - 1024x768 Odd icon shows in system tray whose tooltip says "Intel Graphics" For a while my morning ritual was to boot, wait, reboot using (alt+ctrl+del - ctrl+u - R), wait. Keeping the monitor plugged into the graphics card. But aside for the inefficiency of this method, I sometimes want to standby and can't. On the other hand, the computer is unusable when set to 800x600. Please help, anyone?

  Read the article

• Lost Windows 7 boot after EasyBCD with EFI

  - by drent

  I've got a Lenovo Y580 with a 64GB SSD and a 1TB HDD setup using GPT and setup to boot from (U?)EFI. I was trying to get my Linux Mint installation on the Windows boot manager using EasyBCD (I didn't realise EFI but it wiped my boot partition/loader and I cannot seem to get Windows back (and I still can't get a bootable Linux Mint). Using the System Recovery utility, Startup Repair can't "see" windows (it might be because I'm using a 7 Pro disk to recover Home Premium?). In command prompt, Bootrec tools don't do anything and bootsect can't run because it says that it's for BIOS only and I've booted with EFI. I can see the EFI data on the 200mb SSD partition using diskpart but I don't know how to add Windows back onto whatever bootloader I have/need. At the moment the only options I can see are: Do a fresh install of Windows and hope that the setup remains as fast as the default one (the SSD is some kind of cache for Windows but I can't quite see how it works given that the rest of the SSD is unpartitioned space). This seems like overkill given that Windows was working fine til EasyBCD deleted it. Try forcing BIOS mode and see if that somehow magically fixes things Try converting from GPT to MBR to try and use the bootrec/bootsect tools (and maybe back again) which seems like a really bad idea. Anyone have any ideas?

  Read the article

• After installing Windows 7, I can no longer get to Debian 6 (dual boot)

  - by Jeremy

  I had Debian 6 on my machine (Dell Vostro 260) and used GParted to shrink the partition. I then tried installing Windows 7 on that partition. After Windows 7 installed, I could not choose which OS to run. It would just boot into Windows. I ran GParted again, and saw that Windows created another partition, labeled "System Reserved". That partition had the boot flag set. I tried moving the boot flag to other partitions, including my Debian partition and one with a file system "linux-swap". No option would actually load an OS or anything except for the Windows partition, which is not what I want. Is it worth it to try to fix this installation, or should I start over. I have all my data backed up, so I can easily install from scratch if I need to. If I do start from scratch, which OS should I install first? And then, how do I set up the partitions to install the other OS? Let me know if you have any questions. Thanks for your help.

  Read the article

• windows 7 start menu's search "see more results" broken

  - by fluxtendu

  After searching in my start menu and clicking to "see more results", I got an error dialog: It "seems" that it should be search-ms:query=document an not search:query=document but where can I fix this? Additional info: New user account don't have the problem. Windows 7 Ultimate - RTM Disabling/Enabling again "Windows Search" (in Start Control Panel Programs Turn Windows Features on or off) doesn't fix it. (There's a HKEY_CLASSES_ROOT\Search in my registry that's not there normally.) - outdated see comments... Update: It could help me to diagnose, if someone send me any (hidden) files in %userprofile%\searches and some others pieces of registry: HKEY_CLASSES_ROOT\.search-ms HKEY_CLASSES_ROOT\.searchConnector-ms HKEY_CLASSES_ROOT\SearchFolder HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\Associations\UrlAssociations\SEARCH HKEY_CURRENT_USER\Software\Microsoft\Windows Search Any other related key that I don't have seen... Final Update: Resolved by the rastamanx answer (I can't accept the answer, because I have offer a bounty without accepted answer, vote for him please)

  Read the article

• File Folder "opens with" options, edit and remove buttons greyed out

  - by Paul McKenzie

  I have added an "open with" option for the "FileFolder" file type, but I can't remove it. The edit and remove buttons are greyed out.

  Read the article

• Windows 7 context menu not disappearing after selecting an option

  - by RaYell

  I have a very annoying problem for several days now. Whenever I open context menu in any application on my Windows and select any option it does not disappear correctly. The option I choose is always visiable and what's even more annoying it's beign displayed over any other application. The only solution I've found at the moment is to change a display resolution and restore it. That makes it disappear but it's very annoying because I have to do that always after using context menus. Is there any fix for this problem? Below is the screenshot of how it appears on screen:

  Read the article

• Mac OS X: All bootcamp options start Windows

  - by Brian Heylin

  I just installed the latest security update on Mac OS X (installed on 2-10-2010). On restart my Mac booted in Windows 7, which I had installed previously and was set not to boot by default. I tried to restart holding the alt key, and selected the Mac OS X partition, but still the Windows 7 partition boots. It does not matter what partition I choose, Windows 7 always boots. I took a look in the OS X partition and noticed that the admin home folder is empty, or at least Windows is not showing any files there. There is another user on OS X and I can see their files no problem. This has me stumped, has anyone any suggestions for a finding a solution?

  Read the article

• Ubuntu 9.10 LiveCD stalls after "Install Ubuntu" selected from boot menu on eMachines

  - by nicorellius

  I am trying to install Ubuntu 9.10 from the ISO on a CD (it needs to be this version) on an eMachine with a brand new Seagate hard disk. The CD boots OK, and I choose the language. Then I am presented with the boot menu: Try Ubuntu Install Ubuntu etc I have tried the top two choices several times (trying Ubuntu and installing it), but each and every time the installation stalls and the disc stops spinning right after I hit enter after choosing the option I want. I have tried different CD/DVD drives, changing the jumpers on both CD drives, different hard drives, and nothing works. Maybe there is a BIOS setting that is choking the installation? Any help would be appreciated. Edit - I just tried running the hard drive as the master on the primary IDE and the CD drive as the slave on the primary with the same results. Maybe flash the BIOS?

  Read the article

• Windows 7 libraries missing from start menu?

  - by Chris L.

  I was trying to stop an annoying error where renaming a new folder in Windows 7 (Starter OEM via Toshiba) would bring up the dreaded "cannot find item" error. I was lead to uninstall Windows update KB980408 with the added registry fix. Well, now the problem is still unfixed, but worse, all the libraries have vanished from the right side of my start menu! This is a pretty aggravating state of affairs, and I've already tried a system restore, adding back in some registry keys, changing preferences...the smash. Funnily enough, libraries are still in explorer and I can see that according to preferences they are displaying, but...nada. Any suggestions?

  Read the article

• How to Set "<options>" in fstab - Manual Mounting is Successfull

  - by nicorellius

  I am not real familiar with fstab yet, so I have a couple questions. When I use this command to mount devices: sudo mount -t cifs -o username=admin //192.168.1.134/share_name /mnt/share_name With passwords: sudo="local user password" password="password for device" How do I translate that into an fstab entry? So far, I have tried this in the fstab and mounting fails: //192.168.1.134/share_name /mnt/share_name cifs default 0 0 This is where the question comes in. Where I have default, should there be something instead, indicating username=admin, etc?

  Read the article

• Windows 8 to 8.1 Pro Upgrade SecureBoot Error

  - by Alexandru

  I upgraded from Windows 8 to Windows 8.1. I have an Alienware Aurora R4 with the latest BIOS firmware version, A09. Ever since I did the upgrade, I get a watermark on my desktop saying, "SecureBoot isn't configured correctly"...I would like to get rid of this watermark the correct way (not by hacking system DLLs). My BIOS shows me booting in UEFI mode, and I see that SecureBoot is actually disabled from there. I cannot enable SecureBoot, in either UEFI mode or Legacy Boot mode. Note, I can't even get Legacy Boot mode working without re-formatting my system which I really don't plan on doing, so my question is this...what has changed in the way Windows handles SecureBoot? As far as I can tell, I do not have SecureBoot enabled, and it is trying to tell me that it isn't configured correctly. Why does it even care to check if my BIOS doesn't have it on anyways?! Its so frustrating!

  Read the article

• Windows 7 'All Programs' folders self-close on right-click

  - by Madmanguruman

  Odd issue on my Windows 7 Professional (32-bit) system. If I click on the Start 'orb' then navigate to 'All Programs', then navigate to any of the folders that appear at the bottom of the list (like Accessories) and left-click, the folder contents expand with no issue. If I right-click, the context menu appears for half-a-second or so, then the popup goes away and the entire start menu dismisses. I'm not sure how to debug this issue - I'm considering using Autoruns to try and disable things hooked into the shell one-by-one. Is there a way to use a tool like Process Explorer to narrow down the process that's actually dismissing the menus?

  Read the article

• Bind the windows key to Lubuntu start menu

  - by abel

  I am running Lubuntu 11.10. By default the main menu is bound to Alt+F1 (A-F1) which works. Here is the relevant code from ~/.config/openbox/lubuntu-rc.xml <keybind key="A-F1"> <action name="Execute"> <command>lxpanelctl menu</command> </action> </keybind> This works. When I hit Alt+F1, I can see the start menu. If I change the keys to "Windows key + M" (W-m), I can pull up the start menu using Win+M <keybind key="W-m"> <action name="Execute"> <command>lxpanelctl menu</command> </action> </keybind> However, I cannot bind the start menu to the Windows key alone. If I try replacing "W-m" by "W", the "W" alphabet key gets bound to the start menu. If I try "W-" nothing happens, I have tried the "Super" option too but to no avail. How can I bind the Lubuntu main menu to the windows Key? I have been through some relevant lubuntu questions, like this one, which tries to do the opposite. How do I unbind Super key from menu in Lubuntu

  Read the article

• Handling OPTIONS request in nginx

  - by ctmiller

  We're using HAProxy as a load balancer at the moment, and it regularly makes requests to the downstream boxes to make sure they're alive using an OPTIONS request: OPTIONS /index.html HTTP/1.0 I'm working with getting nginx set up as a reverse proxy with caching (using ncache). For some reason, nginx is returning a 405 when an OPTIONS request comes in: 192.168.1.10 - - [22/Oct/2008:16:36:21 -0700] "OPTIONS /index.html HTTP/1.0" 405 325 "-" "-" 192.168.1.10 When hitting the downstream webserver directly, I get a proper 200 response. My question is: how to you make nginx pass that response along to HAProxy, or, how can I set the response in the nginx.conf? Thanks!

  Read the article

• Windows 7 is stuck at "Starting Windows" when I attempt to boot computer

  - by Eli

  Basically, whenever I turn on my computer, it gets to the Starting Windows phase and just stays there. The startup animation still plays, yet it gets nowhere. I have tried booting into safe mode, however it gets stuck at loading CLASSPNP.SYS. It then freezes there and doesn't continue booting. I have tried booting into recovery mode from the hard drive, and it freezes after displaying the background image. I have tried booting from a recovery CD, which works, and I was able to use system restore. However, using system restore did not fix it, and it still is stuck at the Starting Windows screen. I have tried booting a Windows CD (Windows 8 Retail Installer) to see if I could upgrade it to fix this issue, however that froze at a blank screen after it got past the boot logo. I have tried changing around the BIOS settings (including resetting), to no avail. I have tried re-plugging the internal PSU cables (this is a custom-built desktop), yet this has changed nothing. I can boot into a loopback Ubuntu install on the same drive, which works fine, other than the fact that it has issues with some of the USB ports and the network card. This system has worked fine for the past few months, completely stable, and nothing in the configuration has changed before this error started happening. Startup Repair on the Windows recovery CD doesn't find any issues. Unplugging my secondary hard drive or swapping around memory doesn't change anything. The hard drive itself is fine, it hasn't shown any signs of failure and once again, boots my other OS fine. If anyone could help with this, that would be great. I can't seem to find any possible solution to this. If it makes any difference, my system specs are as follows: AMD FX-8320 Gigabyte GA-970A-D3 4GB of DDR3 Radeon HD 6870 550w PSU I'd like to not have to reinstall Windows, for I have more than a terabyte of data that I would have to back up if that becomes the only option. EDIT: I have since tried the following: Tried the solution involving restoring files from RegBackup, which changed nothing. Tried testing everything with Hiren's boot CD, everything comes back as fine. Tried disabling everything unnecessary in the BIOS and unplugging everything unneeded, it still hangs. Tried swapping out every possible combination of RAM, it still has the same result. The RAM is not at fault it seems Tried every GPU I own (which is many!) and it still hangs at the exact same place. Tried minimizing the power consumption as much as possible, even using an old PCI graphics card. It still hangs at the same place in the same way, signifying that it's not the PSU at fault. Tried resetting the BIOS again, still nothing. Tried every possible combination of BIOS options, even downclocking everything, it still hangs in the same spot. Tried upgrading the BIOS from version FB to FD, which changed nothing. Based on this, I would conclude the motherboard to be at fault. Are there any other possibilities? I don't want to spend $150 for a new motherboard. EDIT 2: This is what it gets stuck at when I try to boot into safe mode: Note the slight graphical corruption at the top of the screen. No matter how I set up the system, this seems to be there. In addition, either it has stopped booting into safe mode now, or it takes upwards of 2+ hours, and I haven't left it running for that long.

  Read the article

• Windows 7 boot problem

  - by nijikunai

  My system doesn't boot at all, upon starting it takes me to the Windows Error Recovery screen saying "Windows failed to start, a recent software or hardware change might be the cause" and gives two options Launch System Repair (Recommended) Start Windows normally But neither options work, upon clicking either of them, some progress bars get displayed and the screen just freezes on "Starting Windows". I tried booting from the Windows 7 disk but it too freezes on the "Starting Windows" screen. I even tried booting from ubuntu, slax linux, but they don't work too.

  Read the article

• Windows 7 Error Recovery upon boot

  - by nijikunai

  My system doesn't boot at all, upon starting it takes me to the Windows Error Recovery screen saying "Windows failed to start, a recent software or hardware change might be the cause" and gives two options Launch System Repair (Recommended) Start Windows normally But neither options work, upon clicking either of them, some progress bars get displayed and the screen just freezes on "Starting Windows". I tried booting from the Windows 7 disk but it too freezes on the "Starting Windows" screen. I even tried booting from ubuntu, slax linux, but they don't work too.

  Read the article

• How to install Grub2 under several common scenarios

  - by Huckle

  I feel the community has long needed a clean guide on how to install Grub2 under a a few extremely common scenarios. I will accept answer as solved when it has one section per scenario and assumes nothing other than what is specified. Please add to the existing answer, wiki style, keeping to the original assumptions. Rules: 1. You cannot, at any point in the answer, invoke Ubiquity (the Ubuntu installer). 2. I strongly recommend not using any automatic boor-repair tools as they're not very educational Scenario 1: Non-booting Linux OS, No boot partition, Fix from Live CD Setup: /dev/sda1 is formatted ext* /dev/sda2 is formatted linux_swap /dev/sda1 doesn't boot because MBR is scrambled and /boot/* was erased Explain: How to boot to a Live CD / USB and restore Grub2 to the MBR and /boot of /dev/sda1 Scenario 2: Non-booting Linux OS, Boot partition, Fix from Live CD Setup: /dev/sda1 is formatted fat /dev/sda2 is formatted ext* /dev/sda3 is formatted linux_swap /dev/sda2 doesn't boot because the MBR is scrambled and /dev/sda1 was formatted Explain: How to boot to a Live CD / USB and restore Grub2 to the MBR and /dev/sda1 and then update the fstab on /dev/sda2 Scenario 3: Install on to thumb drive, Booting various OSes, From Linux OS Setup: /dev/sdb is removable media /dev/sdb1 is formatted fat /dev/sdb2 is formatted ext* /dev/sdb3 is formatted fat The MBR of /dev/sdb is otherwise not initialized You are executing from a Linux based OS installed on /dev/sda Explain: How to install Grub2 on to /dev/sdb1, mark /dev/sdb1 active, be able to chose between /dev/sdb2 and /dev/sdb3 on boot. Scenario 4: (Bonus) Install on to thumb drive, Booting ISO, From Linux OS Setup: /dev/sdb is removable media /dev/sdb1 is formatted fat /dev/sdb1 contains /iso/live.iso /dev/sdb2 is formatted ext* /dev/sdb3 is formatted fat The MBR of /dev/sdb is otherwise not initialized You are executing from a Linux based OS installed on /dev/sda Explain: How to install Grub2 on to /dev/sdb1, mark /dev/sdb1 active, be able to chose between /dev/sdb2, /dev/sdb3, and /iso/live.iso on boot.

  Read the article

• Bootloader error Ubuntu 12.04, system goes to Grub-rescue instead of booting

  - by user83508

  I am trying to install ubuntu 12.04 on my system but it is constantly giving me bootloader install fail error. I have tried to lot to solve this issue but reading articles over the internet but still no gain. Firstly since the bootloader was not getting installed I tried to install it on all the alternative paths given in the installer, failing with I selected install ubuntu without bootloader. Then I tried to manually install bootloader via terminal at try ubuntu via grub-install, but I was not able to do that. Then I tried using boot-repair and it was also not able to install the bootloader because after it my system shows grub-rescue. I tried to use boot-repair and install bootloader on a seperate partition mounted to /boot and still my system is booting and it still shows grub-rescue. The error which my system shows during boot is: Error : no such device : 04ac0510-bd4f-43b8-b885-b885-11c4dec21db8 I am not dual booting and ubuntu is the only OS I am installing. I am using Raid 0 with two blue western digital hard drive so I am not sure whether it is right or not. The details given by boot-repair are in the below mentioned link; http://paste.ubuntu.com/1147208/ Afterwards, I made one more change I installed ubuntu again and this time I installed the bootloader at a different partition on /boot. After this the bootloader error has gone but I am still not able to boot to ubuntu as I get the same error I was getting before. I have not installed dmraid, I feel it is neccessary for Raid0, but I thought ubuntu already has Raid drivers. Moreover in the dmraid installation instructions for 12.04, I used the one for 10.04 and selected to install bootloader at the partitions from the dropdown. This time the installation finished normally without an error but still I am not able to boot my system as the same error shows during booting this time also. Now I am stucked and I have no clue on how I can boot my system. Please tell me how can I boot my system.

  Read the article

• Right click menu stopped working in firefox

  - by umpirsky

  Right click menu stopped working in firefox as well as address bar auto completion. I have tried removing and installing firefox again from software center, but the problem persist. UPDATE: Hehum, strange. I wanted to restart in safe mode, clicked help menu, and noticed that menu is ubuntu software center menu! Then cllosed software center, and menu was gone. So now right click is working, auto complete is working, but there is no main menu! Probably unity global menu integration problem. Also, there is no firefox in launcher nor alt+tab any more. Any idea? UPDATE: For some reason, it works after computer restart :o

  Read the article

• Boot Ubuntu on USB flash drive in Mac OS X 10.4... and Ubuntu

  - by thetester

  I would like to create an OS-agnostic installation of Ubuntu on a flash drive, that boots under Ubuntu and under Mac OS X. Ideally the process would look like: Install Ubuntu 11.10 (or 12.04 if necessary) on a flash drive (from Ubuntu). Boot from flash drive (on PC) to modify files, etc. Plug drive into Mac with OS X 10.4, boot to Ubuntu from it, and use. I have an 8G flash drive. What is the sanest way to do this?

  Read the article

• Grub2 won't detect Ubuntu 11.10 OS after reinstalling Win XP hal.dll.

  - by yoopian

  Hi I'm an Ubuntu newbie here. I've installed ubuntu 11.10 to dual boot on a single HDD. I did a manual partition and basically forgot all the on what sda my /boot partition is. My installation worked out just fine and I tried to install updates with it. After a while I when I wanted to boot to windows it showed that I was missing a "hal.dll" file. I've fixed this problem using the windows resource CD but then after booting up my PC it went straight to Windows XP. I've tried to manually reinstall Grub2 using a Live CD/USB and it worked but I think I have installed in on a different "sda#" (sda5 to be exact) because even though Grub2 loads when I boot my PC, only windows XP shows up as my OS and Ubuntu 11.10 is missing. Now, I've tried installing boot-repair to solve my problems using Live CD/USB. Boot-repair tells me that boot configuration was successful but then a basic grub interface shows up (the black one with a command line grub showing up. Now I can't even boot to Windows XP. Any help would be really appreciated. BTW here's the notes from boot repair that I was asked to save: http://paste.ubuntu.com/890228/ As you can see there are boot files on sda5 and sda7. I think that's the core problem that I have right now. Thanks in advance!

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >