Search Results

Search found 16899 results on 676 pages for 'local'.

Page 44/676 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• Can't ping other machines at Linux VPN PPTP server's local lan from outside

  - by Marco Sanchez

  Before anything else, hello guys, this is the first time I ask for something here so I hope someone can give me a hand, please look at the following network diagram: --------------------------------------------------------------- VPN Server Webserver (SuSE SLES11) | | | ------- VPN LAN -------- | Router with Unique IP (With Port Forwarding rules set and VPN through enabled) | PPTP connection over Internet | Workstation (PC or Laptop with Windows) --------------------------------------------------------------- So the idea is for the workstation to connect to the PPTP Server and then be able to access a Web Application on the Webserver, right now I have the PPTP server configured and the VPN works, I can connect to the SLES11 server with no problems from the workstation and I can ping it and everything works fine but if I try to ping the Webserver from the workstation, I can't reach it, I'm making a mistake somewhere but I don't see where, please note that I'm not a network expert and thus I'd greatly appreciate some specific guidance. Here is some info related to the IPs --------------------------------------------------------------- *** SLES11 VPN Server has 2 Network cards: -- eth0 (Internal Network) IP: 192.168.210.5 MASK: 255.55.255.0 -- eth1 (External Network) IP: 192.168.1.105 MASK: 255.55.255.0 *** Webserver has 1 network card -- eth0 (Internal Network) IP: 192.168.210.221 MASK: 255.55.255.0 *** Workstation -- IP info once connection has been established to the VPN PPP adapter Test VPN Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Test VPN Connection Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.210.110(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 0.0.0.0 DNS Servers . . . . . . . . . . . : 189.209.208.181 (Defined as part of the PPTP Server options config script) 189.209.127.244 Primary WINS Server . . . . . . . : 192.168.210.220 (Defined as part of the PPTP Server options config script) NetBIOS over Tcpip. . . . . . . . : Enabled --------------------------------------------------------------- I also defined the following within IP tables: ------------------------------------------------------------- iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A INPUT -i eth0 -p tcp --dport 1723 -j ACCEPT iptables -A INPUT -i eth0 -p gre -j ACCEPT ------------------------------------------------------------- If you need any piece of information from the PPTP server scripts please let me know, the thing is that I can actually connect to the VPN server and access its services and everything but after that I can't reach any other computer on that LAN. Any help would be greatly appreciated and thanks in advance

  Read the article

• mac local dummy server creation

  - by Dhanaraj

  Hi All, I am using Mac 10.6, I want to create a dummy server in the my system where i can upload the files from other machines using my ip address. What are the steps to be followed? Thanks.

  Read the article

• Postfix block senders outside from local domains

  - by Tibor Peter Toth

  I would like to block every mail that is coming in from a domain that is running on my server. Example: I have domain1.com on my mail server and I'm getting a mail from outside with an email address of [email protected] Then I know it's a Spam, because domain1.com is on my server, so the sender cannot come from outside. I want postfix to check for this, and simply block these kind of emails. I know this is a function in postfix, just don't know which one. Thanks.

  Read the article

• Local Apache on Windows XP not finishing page requests

  - by asgeo1

  I have Apache 2.2.11 installed locally on my Windows XP (SP3) dev machine, which I setup about 3 months ago. I have just started having a strange problem in the last few week. Apache is serving some basic PHP applications like phpMyAdmin. When I make a page request, Apache appears to not finish serving all resources for that page. Firefox shows the "Transferring data from servername..." message, and the page never completes. The same problem happens in Internet Explorer too. I can sometimes tell which resource it is waiting on, because most of the page will render except for some image or similar resources. (Not sure why Firebug doesn't show this) It doesn't have the problem every page request - for page requests where most of the resources are cached in my browser, the page request will work with no problems. Or pages that are very light will work with no problems. However, if I "hard" refresh the page, I will have this problem (probably because it is requesting all page resources) Does anyone know what this could be? It is so strange that it has only just started happening - and I did not make any changes to my system (that I am aware of) I tried playing with the Apache ThreadsPerChild setting, but it did not seem to make a difference. UPDATE: I have been doing some more tests. I have been serving the most basic of pages, just a plain HTML file: <html> <body> <h1>testing</h1> </body> </html> If I request this page multiple times in a row, AND each request occurs immediately after the previous has completed, then 50% of the time the request will time out. However, if I put a 1-2 second gap between requests, then there is no problem. This correlates to what I have observed when the brower requests a real application page. When the browser has nothing cached, then all of the page resources are requested from the browser in a short amount of time - this appears to trigger the problem. UPDATE2: Nathan Long has helped me understand the issue a little better with the server-status page (see below). It is weird, it is like the server has a hickup sending data to the client. The client sits there waiting forever for data that never arrives. Closing the client process does not terminate the connection on the server - the server still has active threads for each previously attempted connection, but they just sit there - not sending any data and never terminating. (even though the client is now closed) Only a restart of the server seems to terminate them.

  Read the article

• adding remote ssh printer as local printer

  - by guest

  I have SSH access to a remote host (FreeBSD) that has a printer set up. I do not have root access on that host or any other special user rights. Now I want to print directly from my laptop on that printer (Ubuntu 10.10). The problem is that I don't know how to "import" or whatever the the printer, as it needs authetification from my user account (print quota limitations). E-mailing me the files I want to print or scp them every time is a pain, ATM I pipe the PostScript output manually to a ssh command, but that's also a huge working overhead. E.g. when I want to print a foo.pdf pdftops '/path/to/foo.pdf' - | ssh user@remotehost 'lpr -P printername' So, does anyone know of a smooth way to shorten this procedure? Ideally I would just want to use a printername instead of the whole ssh command

  Read the article

• Configure Postfix to use external MX servers for delivery of local mail if user is unknown

  - by mr.b

  I have a following setup: linux box with postfix configured to be responsible for example.com domain domain's MX servers are configured so that mail sent to example.com is sent to google mail servers several user accounts on linux machine exist (same machine also hosts example.com site) When someone from the outside attempts to send mail to address ending with @example.com, it gets routed to google mail (and there handled appropriately). When linux machine tries to send mail to outside world, mail is delivered correctly, as reverse dns and spf records are configured correctly, so linux machine is valid mail sender for example.com domain (along with google mail servers). However, here's the problem. When php application (hosted at linux box) tries to send mail to [email protected] (and someuser doesn't exist on linux box), it fails, since it doesn't even consult google mail servers, but postfix smtp locally concludes that "someuser" is unknown. So, the question is: how do I tell postfix to relay mails sent to @example.com domain to google mail servers (so, to servers specified in MX records), IF and only if a mailbox is not found locally.

  Read the article

• Firefox will not remember local site cookie

  - by Campo

  This is a weird one. We have a production server (Server 2008) and two staging servers (Server 2008 and Server 2003) I have sites on all of these. They all use cookies. On the Production server when browsing to our site www.supernovainteractive.com there is a cookie that detects when you visted the site and it will not refresh the logo animation (top left hand side) on clicking to another page. This works for all browsers on the production server. I’m not sure what’s going on but for some reason cookies are not working on one site in the 2008 staging server only. This is when browsing using Firefox (3.6.3) they work fine on all other browsers (IE, Chrome, Safari, Opera) In addition, the 2003 staging server works fine. You can test on the Supernova Interactive site by noticing the logo in the top left corner. It uses a cookie to detect if you’ve already seen the animation. Once you’ve seen it once, it doesn’t animate again until tomorrow. Currently, it’s animating every time. I have opened an outside facing port so others can see the issue. Http://exchange.supernova.com:10009 Any ideas on this one? Firewalls are off on the server. Notice you do not get a cookie from Exchange.supernova.com.

  Read the article

• CentOS send mail with external SMTP server and without local daemons

  - by Vilx-

  I've got a little old server with CentOS 6.5 on it. The hardware is old and crappy, but enough for what it has to do. Which consists of SSH (+SFTP), Apache, PHP and MySQL. Still, I'm trying to cut away all that I can. One thing that it does not need to do is to be an SMTP server. There are no mailboxes on it and nobody will ever route mail through it. However I do want it to send me an email when something goes wrong. Also, the webpages will send emails from PHP. So that brings me to the question - can I set up the mail system in such a way that there isn't an expensive mailer daemon sitting in the background with queues and whatnotelse, but rather every email is directly and immediately delivered to an external SMTP server? And how do I go about it?

  Read the article

• What do you have in /usr/local/sbin/adduser.local?

  - by jldugger

  I'm looking for example additional configuration done on new user creation, the kind of stuff that goes beyond /etc/skel. For example, has anyone written a script to set public_html set-GUID?

  Read the article

• set up re-direct for lan clients to local t&c page

  - by tb2571989

  Hi, I'm trying to set up something on my network so that when users connect and try and use the internet they are re-directed to a locally-hosted terms and conditions and policy page. Once they click "accept" then they will be passed through to their homepage, otherwise if they decline then the window will close or show them an error message. I've spent a while looking into this and am wondering if it's possible to do witout having to setup/add to a firewall. Otheriwse let me know what my options are and I can pass it on. Many Thanks Tom

  Read the article

• ubuntu qcow2 image for local usage

  - by aisbaa

  I'm using kvm and I would like to run ubuntu server on it. My goal is to run db2 database instance for development. Is there ready to use ubuntu qcow2 images online for such purpose? Or should I install it from live cd? I've found this instruction UEC/Images, but at launch I get: $ kvm -fda ${floppy} -drive if=virtio,file=./disk.img -boot a ... Nothing to boot: No such file or directory (http://ipxe.org/...) No more network devices No bootable device. Solution: I havent found pre-installed ubuntu virtual machine image online, so solution is to install it by your self.

  Read the article

• Downgrade 'local' packages in Debian/Ubuntu

  - by Matt Joiner

  I recently unticked the "pre-released updates" option in Software Sources on my Ubuntu Lucid 10.04.1 installation. The Ubuntu wiki states the following regarding this source: The proposed updates are updates which are waiting to be moved into the recommended updates queue after some testing. They may never reach recommended or they may be replaced with a more recent update. Roughly 20 installed packages have indeed not made it into recommended updates, and occasionally cause conflicts when I install new software, as related packages of the newer version are unavailable now that I've disabled the source. How can I force a downgrade of all packages for which an earlier version exists in a enabled repository?

  Read the article

• UDP blocked by Windows XP Firewall when sending to local machine

  - by user36367

  Hi there, I work for a software development company but the issue doesn't seem to be programming-related. Here is my setup: - Windows XP Professional with Service Pack 3, all updated - Program that sends UDP datagrams - Program that receives UDP datagrams - Windows Firewall set to allow inbound UDP datagrams on a specific port (Scope: Subnet) If I send a UDP datagram on any port to other, similar machines, it goes through. If I send the UDP datagram to the same computer running the program that sends (whether using broadcast, localhost IP or the specific IP of the machine), the receiver program gets nothing. I've traced the problem down to the Windows XP Firewall, as Windows 7 does not have this problem (and I do not wish to sully my hands with Vista). If the exception I create for that UDP port in the WinXP firewall is set for a Scope of Subnet the datagram is blocked, but if I set it to All Computers or specifically enter my network settings (192.168.2.161 or 192.168.2.0/255.255.255.0) it works fine. Using different UDP ports makes no difference. I've tried different programs to reproduce this problem (ServerTalk to send and either IP Port Spy or PortPeeker to receive) to make sure it's not our code that's the issue, and those programs' datagrams were blocked as well. Also, that computer only has one network interface, so there are no additional network weirdness. I receive my IP from a DHCP server, so this is a straightforward setup. Given that it doesn't happen in Windows 7 I must assume it's a defect in the Windows XP Firewall, but I'd think someone else would have encountered this problem before. Has anyone encountered anything like this? Any ideas? Thanks in advance!

  Read the article

• DNS request times out then succeeds on my local network. Why?

  - by Dan

  I have a W2K3 Server that is the Domain Controller and also the DNS server. I wanted to make another DNS zone on my network called "something.local" and then make 'A' records to point requests like 'admin.something.local' and 'www.something.local' to machines on my network. I keep getting DNS timeouts but then after 2 tries it succeeds. Why would this happen? How can I troubleshoot? From my desktop I run: nslookup admin.something.local and get: Server: server.domain.com.au.local Address: 192.168.0.10 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. Name: admin.something.local Address: 192.168.0.191 If I go back the other way: nslookup 192.168.0.191 I get: Server: server.domain.com.au.local Address: 192.168.0.10 Name: admin.something.local Address: 192.168.0.191 My DNS server address is 192.168.0.10. The new DNS zone is not hooked up to active directory. I do not have much experience with DNS. Yesterday it was working fine. I have tried doing an 'ipconfig /flushdns' on both my desktop and the DNS server

  Read the article

• I want to build an debian apt site for local LAN updates

  - by user73504

  Hi, I have downloaded all debian's DVD disks, and I have set up apache httpd service. I combined all dvd disk 's file, but I found the .gpg file I need and I can't create it. it looks like source's signature file. so when I set my /etc/apt/sources.list file as follow: deb http://192.168.1.102/apt/debian squeeze main contrib it noticed me the gpg files verilied faild. so I want to know , how to create gpg file, and do I need some other work except put DVD's file to the apache's htdocs path?

  Read the article

• Qmail & Open Relay on local domains

  - by Jonathan

  Hello. I have a dedicated server on 1&1 and I manage it with Plesk. The problem is that if I try to send a mail outside the server, I must to authenticate with the email and the password, but if I send an email to a address inside of my server I don't need neither email or password. This is a problem because the spammers are sending mails without any problem to the server accounts. We are receiving about 900 - 1200 emails everyday! What can I do? I use qmail on CentOS Thanks

  Read the article

• Git clone/pull across local network

  - by Tom Sarduy

  I'm trying to clone/pull a repository in another PC using Ubuntu Quantal. I have done this on Windows before but I don't know what is the problem on ubuntu. I tried these: git clone file:////pc-name/repo/repository.git git clone file:////192.168.100.18/repo/repository.git git clone file:////user:pass@pc-name/repo/repository.git git clone smb://c-pc/repo/repository.git git clone //192.168.100.18/repo/repository.git Always I got: Cloning into 'intranet'... fatal: '//c-pc/repo/repository.git' does not appear to be a git repository fatal: The remote end hung up unexpectedly or fatal: repository '//192.168.100.18/repo/repository.git' does not exist More: The other PC has username and password Is not networking issue, I can access and ping it. I just installed git doing apt-get install git (dependencies installed) I'm running git from the terminal (I'm not using git-shell) What is causing this and how to fix this? Any help would be great! UPDATE I have cloned the repo on Windows using git clone //192.168.100.18/repo/intranet.git without problems. So, the repo is accessible and exist! Maybe the problem is due user credentials?

  Read the article

• Mac OS X 10.6.5 and link-local addresses (169.254.x.x)

  - by WMR

  Starting with the latest update of Mac OS X (10.6.5) all Apple applications (Safari, Mail, iChat, etc.) don't connect to the internet anymore, if the assigned IP address is from the 169.254.0.0./16 range. This is not a routing problem, I can still ping any server I want, even connecting via command line tools works. I know this problem could easily be fixed by changing the IP address to a more common RFC1918 address (e.g. 192.168.0.0./16), but this is what the ISP assigns via DHCP and I am not sure I can convince them (Xplornet) to change that. So I am wondering if there's a (hidden?) setting that would convince Apple applications, that they are in fact still online.

  Read the article

• Trouble connecting to a local SQL server instance from the web

  - by dfarney

  We have a small network behind a firewall (WatchGuard XTM 2 series) and network switch. On our network we have multiple instances of SQL server, but 1 in specific that I would like to be able to access remotely from our website. We have a static IP address from our ISP and then all the machines on the network have a locally assigned dynamic IP address. When trying to connect to the database from outside our network how do I get the request to be directed to the proper machine / SQL instance? Is it a parameter in my connection string or something in my firewall? A few things to rule out: 1) The firewall is allowing access from the website to our network. I added the site's IP and opened up port 1433. Also, when trying to connect and monitoring the firewall no exceptions come up as they did before I added the proper IP address. 2) Remote connections on the SQL server has been setup and enabled. I've done a lot of reading up on remote connections and I am sure it has been setup properly. I am currently getting this error message on my site: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)

  Read the article

• Send emails from shell script without local mailserver

  - by devdude

  How can I send email from a shellscript (usually cronjob) without running a mailserver on the same host. Using a smtp server. Running Ubuntu. I looked a t various tutorials, but couldnt find a suitable approach (simple and secure). Thanks Sven

  Read the article

• Nginx, as reverse proxy, could not proxy_pass to a domain pointing to the local JBOSS

  - by larryzhao

  My environment is Ubuntu 12.04, Nginx 1.20, and Torquebox 2.0.3 which is actually JBoss AS 7. I have two app deployed on Torquebox, it listens to 8080 and have different hostnames, app1.mydomain.com and app2.mydomain.com. I added 127.0.0.1 app1.mydomain.com and 127.0.0.1 app2.mydomain.com in /etc/hosts then I curl app1.mydomain.com:8080 and curl app2.mydomain.com:8080 both have correct return. Then I go to my nginx. I would like nginx to pass the visit to www.app1.com to app1.mydomain.com:8080, so I have the following configuration: # primary server - proxypass to torquebox server { listen 80; server_name www.app1.com; access_log off; error_log off; # proxy to Torquebox location / { proxy_pass http://app1.mydomain:8080/; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_max_temp_file_size 0; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; proxy_buffers 4 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; } } But it doesn't work. curl www.app1.com returns nothing. And if I visit www.app1.com in Safari, the http return code is 404. I don't know why, need help.

  Read the article

• Access node.js local server though mobile via same shared wifi

  - by laggingreflex

  EDIT: I was stuck in this situation before but then it was Apache-related But this time I'm using NodeJS, so the old answer doesn't help. I'm running apache a NodeJS webserver (on port 80) on Windows 7. I want to access the webserver through my mobile which shares the wifi router with my pc locally. http://localhost works from PC. But I can't access http://192.168.1.4 from either my phone or even my computer. ipconfig /all on my computer lists my ip address as 192.168.1.4 Wireless LAN adapter Wireless Network Connection: IPv4 Address. . . . . . . . . . . : 192.168.1.4(Preferred) I can ping my phone's (internal) ip address [192.168.1.5] from PC and vice-versa, I can ping my PC [192.168.1.4] from my phone. So why can't I access http://192.168.1.4 from my phone? (or PC) Firewall is off.

  Read the article

• Download file to local pc from remote ssh

  - by user20285

  Because of my web host, I can't use FTP. There's a file I'd like to download. How can I do this through ssh?

  Read the article

• Local IP address same as Google's external

  - by GRIGORE-TURBODISEL

  I'm exampling Google's IPs, but you get the idea. What happens if somebody configures a router's LAN address pool to range from 62.231.75.2 to 62.231.75.255, then his computer's IP address to 62.231.75.232 and someone else on the network tries to access Google? Or better off, is there any case in which someone in that network can, by merely attempting to access Google, accidentally bump into another computer on the network?

  Read the article

• Apache proxy to two local services

  - by thaweatherman

  I currently have one service running locally on a machine and apache is handling doing a proxy pass to it on the root. However I now also have another service I want to use a proxy pass with when a certain directory is accessed. So servername.com/ goes to one and servername.com/specialdir goes to the other. I currently have a virtualhost handling the former. How would I go about adding in the latter?

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >