Search Results

Search found 13697 results on 548 pages for 'linking errors'.

Page 440/548 | < Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >

  • How does this Switch statement know which case to execute? (PHP/MySQL)

    - by ggfan
    Here is a code form a PHP+MySQL book I am reading and I am having trouble understanding this code. This code is about checking a file uploaded into a database. (Please excuse any spelling errors if any, I was typing it in) Q1: How does it know which case to echo? In the whole code, there is no mention of each case. Q2: Why do they skip case 5?! Or does it not matter which numbers you use(so I can have case 1, case 18, case 2?) if($_FILES['userfile']['error']>0) { echo 'Problem: '; switch($_FILES['userfile']['error']) { case 1: echo 'File exceeded upload_max_filesize'; break; case 2: echo 'File exceeded max_file_size'; break; case 3: echo 'File only partially uploaded'; break; case 4: echo 'No file uploaded'; break; case 6: echo 'Cannot upload file: no temp directory specified'; break; case 7: echo 'Upload failed: Cannot write to disk'; break; } exit; }

    Read the article

  • Signals and Variables in VHDL - Problem

    - by Morano88
    I have a signal and this signal is a bitvector. The length of the bitvector depends on an input n, it is not fixed. In order to find the length, I have to do some computations. Can I define a signal after defining the variables ? It is ggiving me errors when I do that. It is working fine If I keep the signal before the variables .. but I don't want that .. the length of Z depends on the computations of the variables. What is the solution ? library IEEE; use IEEE.STD_LOGIC_1164.ALL; use IEEE.STD_LOGIC_ARITH.ALL; use IEEE.STD_LOGIC_UNSIGNED.ALL; entity BSD_Full_Comp is Generic (n:integer:=8); Port(X, Y : inout std_logic_vector(n-1 downto 0); FZ : out std_logic_vector(1 downto 0)); end BSD_Full_Comp; architecture struct of BSD_Full_Comp is Component BSD_BitComparator Port ( Ai_1 : inout STD_LOGIC; Ai_0 : inout STD_LOGIC; Bi_1 : inout STD_LOGIC; Bi_0 : inout STD_LOGIC; S1 : out STD_LOGIC; S0 : out STD_LOGIC ); END Component; Signal Z : std_logic_vector(2*n-3 downto 0); begin ass : process Variable length : integer := n; Variable pow : integer :=0 ; Variable ZS : integer :=0; begin while length /= 0 loop length := length/2; pow := pow+1; end loop; length := 2 ** pow; ZS := length - n; wait; end process; end struct;

    Read the article

  • Simplest possible rack app -> permission error

    - by 7stud
    Here's the program(1.rb) blah blah blah blah blah blah: require 'rack' my_rack = lambda { |env| [200, {}, ["Hello. The time is: #{Time.now}"]] } handler = Rack::Handler::WEBrick handler.run(my_rack, :PORT => 12_500) Here's the error (blah blah blah blah blah): ~/ruby_programs$ ruby 1.rb [2012-12-07 21:49:09] INFO WEBrick 1.3.1 [2012-12-07 21:49:09] INFO ruby 1.9.3 (2012-04-20) [x86_64-darwin10.8.0] [2012-12-07 21:49:09] WARN TCPServer Error: Permission denied - bind(2) [2012-12-07 21:49:09] WARN TCPServer Error: Permission denied - bind(2) /Users/7stud/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/utils.rb:85:in `initialize': Permission denied - bind(2) (Errno::EACCES) from /Users/7stud/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/utils.rb:85:in `new' from /Users/7stud/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/utils.rb:85:in `block in create_listeners' from /Users/7stud/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/utils.rb:82:in `each' from /Users/7stud/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/utils.rb:82:in `create_listeners' from /Users/7stud/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/server.rb:82:in `listen' from /Users/7stud/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/server.rb:70:in `initialize' from /Users/7stud/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/httpserver.rb:45:in `initialize' from /Users/7stud/.rvm/gems/ruby-1.9.3-p194@programming/gems/rack-1.4.1/lib/rack/handler/webrick.rb:10:in `new' from /Users/7stud/.rvm/gems/ruby-1.9.3-p194@programming/gems/rack-1.4.1/lib/rack/handler/webrick.rb:10:in `run' from 1.rb:5:in `<main>' ~/ruby_programs$ Here's line 85 of ../webrick/utils.rb: sock = TCPServer.new(ai[3], port) If I replace the code in 1.rb with this: require 'socket' server = TCPServer.new 12_000 # Server bind to port 2000 loop do client = server.accept # Wait for a client to connect client.puts "Hello !" client.puts "Time is #{Time.now}" client.close end I don't get any errors, and if I enter the address: http://localhost:12000/ in my browser, I get the expected output: Hello ! Time is 2012-12-07 18:58:15 -0700

    Read the article

  • C# Multi CheckboxList update inserts checked records but doesn't delete unchecked records

    - by DLL
    I have a multi checkboxlist on a formview. Both use queries in a tableadapter. I'm using VS 2012. When the user updates the form, I use the following code to update the checkbox data. If a user checks a new box, a new record is inserted correctly, however if the user unchecks a box the existing record is not deleted. The delete query works fine if I run it from the query builder in the table adapter, it's reaching the expected line in the code correctly, all values are correct and I receive no errors. I use a similar query to delete records when the form level data is deleted which works fine. The very last line is the one that doesn't work. Query: DELETE FROM [SLA_Categories] WHERE (([SLA_ID] = @SLA_ID) AND ([Choice_ID] = @Choice_ID)) protected void FormView1_ItemUpdating(object sender, FormViewUpdateEventArgs e) { if (FormView1.DataKey.Value != null) { Categs = (CheckBoxList)FormView1.FindControl("CheckBoxList1"); CurrentSLA_ID = (int)FormView1.DataKey.Value; } if (CurrentSLA_ID > 0) { foreach (ListItem li in Categs.Items) { // See if there's a record for the current sla in this category int CurrentChoice_ID = Convert.ToInt32(li.Value); SLADataSetTableAdapters.SLA_CategoriesTableAdapter myAdapter; myAdapter = new SLADataSetTableAdapters.SLA_CategoriesTableAdapter(); int myCount = (int)myAdapter.FindCategoryBySLA_IDAndChoice_ID(CurrentSLA_ID, CurrentChoice_ID); // If this category is checked and there is not an existing rec, insert one if (li.Selected == true && myCount < 1) { // Insert a rec for this sla myAdapter.InsertCategory(CurrentChoice_ID, CurrentSLA_ID); } // If this category is unchecked and there is and existing rec, delete it if (li.Selected == false && myCount > 0) { // Delete this rec myAdapter.DeleteCategoryBySLA_IDAndChoice_ID(CurrentChoice_ID, CurrentSLA_ID); } } } }

    Read the article

  • Disable proxy for entire application?

    - by Brent
    Ever since upgrading to Visual Studio 2010, I'm running into an issue where the first web request of any type (WebRequest, WebClient, etc.) hangs for about 20 seconds before completing. Subsequent calls work quickly. I've narrowed down the problem to a proxy issue. If I manually disable proxy settings, I don't experience this delay: Dim wrq As WebRequest = WebRequest.Create(Url) wrq.Proxy = Nothing What's strange is that there are no proxy settings enabled on this machine in Internet Options. What I'm wondering is if there is a way to disable proxy settings for my entire project in one shot without explicitly disabling as above for every web object. The main reason I want to be able to do this is that I'm trying to use an API (http://code.google.com/p/google-api-for-dotnet/) which uses web requests, but does not provide any way to manually disable proxy settings. I have found some information suggesting that I need to add some proxy information to the app.config file, but I get errors building my program if I make an edits to that file. Can anyone point me in the right direction?

    Read the article

  • Newbie T-SQL dynamic stored procedure -- how can I improve it?

    - by Andy Jones
    I'm new to T-SQL; all my experience is in a completely different database environment (Openedge). I've learned enough to write the procedure below -- but also enough to know that I don't know enough! This routine will have to go into a live environment soon, and it works, but I'm quite certain there are a number of c**k-ups and gotchas in it that I know nothing about. The routine copies data from table A to table B, replacing the data in table B. The tables could be in any database. I plan to call this routine multiple times from another stored procedure. Permissions aren't a problem: the routine will be run by the dba as a timed job. Could I have your suggestions as to how to make it fit best-practice? To bullet-proof it? ALTER PROCEDURE [dbo].[copyTable2Table] @sdb varchar(30), @stable varchar(30), @tdb varchar(30), @ttable varchar(30), @raiseerror bit = 1, @debug bit = 0 as begin set nocount on declare @source varchar(65) declare @target varchar(65) declare @dropstmt varchar(100) declare @insstmt varchar(100) declare @ErrMsg nvarchar(4000) declare @ErrSeverity int set @source = '[' + @sdb + '].[dbo].[' + @stable + ']' set @target = '[' + @tdb + '].[dbo].[' + @ttable + ']' set @dropStmt = 'drop table ' + @target set @insStmt = 'select * into ' + @target + ' from ' + @source set @errMsg = '' set @errSeverity = 0 if @debug = 1 print('Drop:' + @dropStmt + ' Insert:' + @insStmt) -- drop the target table, copy the source table to the target begin try begin transaction exec(@dropStmt) exec(@insStmt) commit end try begin catch if @@trancount > 0 rollback select @errMsg = error_message(), @errSeverity = error_severity() end catch -- update the log table insert into HHG_system.dbo.copyaudit (copytime, copyuser, source, target, errmsg, errseverity) values( getdate(), user_name(user_id()), @source, @target, @errMsg, @errSeverity) if @debug = 1 print ( 'Message:' + @errMsg + ' Severity:' + convert(Char, @errSeverity) ) -- handle errors, return value if @errMsg <> '' begin if @raiseError = 1 raiserror(@errMsg, @errSeverity, 1) return 1 end return 0 END Thanks!

    Read the article

  • Moving delegate-related function to a different thread

    - by Chris
    Hello everybody. We are developing a library in C# that communicates with the serial port. We have a function that is given to a delegate. The problem is that we want it to be run in a different thread. We tried creating a new thread (called DatafromBot) but keep using it as follows (first line): comPort.DataReceived += new SerialDataReceivedEventHandler(comPort_DataReceived); DatafromBot = new Thread(comPort_DataReceived); DatafromBot.Start(); comPort_DataReceived is defined as: Thread DatafromBot; public void comPort_DataReceived(object sender, SerialDataReceivedEventArgs e) { ... } The following errors occur: Error 3 The best overloaded method match for 'System.Threading.Thread.Thread(System.Threading.ThreadStart)' has some invalid arguments C:...\IR52cLow\CommunicationManager.cs 180 27 IR52cLow Error 4 Argument '1': cannot convert from 'method group' to 'System.Threading.ThreadStart' C:...\IR52cLow\CommunicationManager.cs 180 38 IR52cLow Any ideas of how we should convert this to get it to compile? Please note that comPort.DataReceived (pay attention to "." instead of "_") lies within a system library and cannot be modified. Thanks for your time! Chris

    Read the article

  • PHP (A few questions) OO, refactoring, eclipse

    - by jax
    I am using PHP in eclipse. It works ok, I can connect to my remote site, there is colour coding of code elements and some code hints. I realise this may be too long to answer all questions, if you have a good answer for one part, answering just that is ok. Firstly General Coding I have found that it is easy to loose track of included files and their variables. For example if there was a database $cursor it is difficult to remember or even know that it was declared in the included file (this becomes much worse the more files you include). How are people dealing with this? How are people documenting their code - in particular the required GET and POST data? Secondly OO Development: Should I be going full OO in my development. Currently I have a functions library which I can include and have separated each "task" into a separate file. It is a bit nasty but it works. If I go OO how do I structure the directories in PHP, java uses packages - what about php? How should I name my files, should I use all lower case with _ for spaces "hello_world.php"? Should I name classes with Uppercase like Java "HelloWorld.php"? Is there a different naming convention for Classes and regular function files? Thirdly Refactoring I must say this is a real pain. If I change the name of a variable in one place I have to go through whole document and each file that included this file and change the name their too. Of course, errors everywhere is what results. How are people dealing with this problem? In Java if you change the name in one place it changes everywhere. Are there any plugins to improve php refactoring? I am using the official PHP version of Eclipse from their website. thanks

    Read the article

  • PHP Switch and Login

    - by Steve Rivera
    I'm fairly new with PHP and I am messing around with a login/registration system. I setup my sample website using a PHP-SWITCH script I found a while back: <?php switch($_GET['id']) { default: include('home.php'); /* LOGIN PAGES */ break; case "register_form": include ('includes/user_system/register_form.php'); } ? On the registration page the form links to my "register.php" which checks the validity of the form and to check for any blank fields and so on. "register.php" is supposed to refresh the page and add a reason to what the user did wrong when submitting the form. On my "register_form.php" page, which holds the actual form. This field is hidden until the user makes a mistake. <?php if (isset($reg_error)) { ?> , please try again. My "register.php" checks the form for all the errors. Here's the bit of code that will refresh the page with the reason for the error: // Check if any of the fields are missing if (empty($_POST['username']) || empty($_POST['password']) || empty($_POST['confirmpass'])) { // Reshow the form with an error $reg_error = 'One or more fields missing'; include 'register_form.php'; Now after I submit the form without any fields filled out I get the error code, but it refreshes to the actual "register_form.php". The problem with this is that because of my PHP-SWITCH script (helps me manage the site a lot easier) I don't have any formatting on that page. The actual URL to my "register_form.php" would be: "index.php?id=register_form.php". Now I have tried several different things such as changing it to: include 'index.php?id=register_form.php' And also changing it to: header(location:index.php?id=register_form.php') Unfortunately all this does is refresh the page without the reason for the error. I know this can be easily solved by just adding a Javascript Validator but I'd like to know if it is possible to refresh the page with the error using either "include" or "header()" while having a PHP-SWITCH script on the website.

    Read the article

  • Can't override "From" address in MailMessage class using .config login credentials

    - by Jeff
    I'm updating some existing code that sends a simple email using .Net's SMTP classes. Sample code is below. The SMTP host is google and login info is contained in the App.config as shown below (obviously not real login info :)). The problem I'm having, and I haven't been able to find any answers Googling, is that I can NOT override the display of the "from" email address that's contained in the "username" attribute off the Network element in the config in the delivered email. In the line below that explicitly sets the From property off the myMailMessage object, that value, "[email protected]" does NOT display when the email is received. It still shows as "[email protected]" from the Network tag. However, the From name "Sparky" does appear in the email. I've tried adding a custom "From" header to the Header property of the myMailMessage but that didn't work either. Is there anyway to login to the smtp server, as shown below using the Network tag credentials, but in the actual email received override the From email address that's displayed? Sample code: MailMessage myMailMessage = new MailMessage(); myMailMessage.Subject = "My New Mail"; myMailMessage.Body = "This is my test mail to check"; myMailMessage.From = new MailAddress("[email protected]", "Sparky"); myMailMessage.To.Add(new MailAddress("[email protected]", "receiver name")); SmtpClient mySmtpClient = new SmtpClient(); mySmtpClient.Send(myMailMessage); in App.config: <system.net> <mailSettings> <smtp deliveryMethod="Network" from="[email protected]"> <network host="smtp.gmail.com" port="587" userName="[email protected]" password="mypassword" defaultCredentials="false"/> </smtp> </mailSettings> </system.net>

    Read the article

  • WMI Query Script as a Job

    - by Kenneth
    I have two scripts. One calls the other with a list of servers as parameters. The second query is designed to execute a WMI query. When I run it manually, it does this perfectly. When I try to run it as a job it hangs forever and I have to remove it. For the sake of space here is the relevant part of the calling script: ProcessServers.ps1 Start-Job -FilePath .\GetServerDetailsLight.ps1 -ArgumentList $sqlsrv,$destdb,$server,$instance GetServerDetailsLight.ps1 param($sqlsrv,$destdb,$server,$instance) $password = get-content C:\SQLPS\auth.txt | convertto-securestring $credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist "DOMAIN\MYUSER",$password [System.Reflection.Assembly]::LoadWithPartialName('Microsoft.SqlServer.SMO') $box_id = 0; if ($sqlsrv.length -eq 0) { write-output "No data passed" break } function getinfo { param( [string]$svr, [string]$inst ) "Entered GetInfo with: $svr,$inst" $cs = get-wmiobject win32_operatingsystem -computername $svr -credential $credentials -authentication 6 -Verbose -Debug | select Name, Model, Manufacturer, Description, DNSHostName, Domain, DomainRole, PartOfDomain, NumberOfProcessors, SystemType, TotalPhysicalMemory, UserName, Workgroup write-output "WMI Results: $cs" } getinfo $server $instance write-output "Complete" Executed as a job it will show as 'running' forever: PS C:\sqlps> Start-Job -FilePath .\GetServerDetailsLight.ps1 -ArgumentList DBSERVER,LOGDB,SERVER01,SERVER01 Id Name State HasMoreData Location Command -- ---- ----- ----------- -------- ------- 21 Job21 Running True localhost param($sqlsrv,$destdb,... GAC Version Location --- ------- -------- True v2.0.50727 C:\WINDOWS\assembly\GAC_MSIL\Microsoft.SqlServer.Smo\10.0.0.0__89845dcd8080cc91\Microsoft.SqlServer.Smo.dll getinfo MSDCHR01 MSDCHR01 Entered GetInfo with: SERVER01,SERVER01 The last output I ever get is the 'Entered GetInfo with: SERVER01,SERVER01'. If I run it manually like so: PS C:\sqlps> .\GetServerDetailsLight.ps1 DBSERVER LOGDB SERVER01 SERVER01 The WMI query executes just as expected. I am trying to determine why this is, or at least a useful way to trap errors from within jobs. Thanks!

    Read the article

  • SEO - Problems possibly related to 301 Moved Permanently

    - by ILMV
    Right, here's the story: We have had a website for one of our brands now for many years, the site design was very bad and recently did a complete overhaul, mostly design, but also some of the backend code. The original site was using links such as this example.com/products/item/127 and thus I wanted to change them to be move user friendly, especially to include the product name, the same link now reads example.com/product/127/my-jucy-product/. Since our switch over we have seen our Google results take a beating (we were on the first page for our normal search terms, now we're nearer the 4th!). The other problem we're having is that the links to the old products haven't updated to the new links despite me coding a 301 redirect from old to new. The 301 is not being fired from .htaccess, but in our PHP framework. I had a look at how the site is being loaded from a old link that is still in Google and here's what firebug is reporting: GET <google link> 302 Found GET example.com/products/item/127 302 Found GET example.com/products/item/127 301 Moved Permanently GET example.com/product/127/my-jucy-product/ 302 Found So the Google link has a 302, good. But when the old link comes in our framework is returning a 302! It's only afterwards when it finally hits the right part of the framework does it 301, so here's my question: Is the reason our old links have not changed and our Google Ranking has significantly nose dived because Google is seeing a 302 before the 301? At the time I was reluctant to mess with our .htaccess because it had become pretty complicated and I was under some pretty intense time constraints, now I'm wondering whether this was an incorrect disicion and perhaps I should revisit it. Many thanks! Edit Bugger, just signed up to the Webmaster Tools and I'm getting redirect errors all over the place, hundreds of them! I think this is my problem.

    Read the article

  • Selenium tests not building due to NUnit error (Mono+OS X)

    - by Jem
    I'm running Selenium RC on my Mac and driving my tests using NUnit in C#. My problem is that when I try and build a simple test in Mono I get the following error. Error CS0433: The imported type `NUnit.Framework.Assert' is defined multiple times (CS0433) (TestProject) When I comment out the Assert's it runs fine. The code I'm using currently is just a dump from the openqa site using System; using System.Text; using System.Text.RegularExpressions; using System.Threading; using NUnit.Framework; using Selenium; namespace SeleniumTests { [TestFixture] public class AllTests { private ISelenium selenium; private StringBuilder verificationErrors; [SetUp] public void SetupTest () { selenium = new DefaultSelenium ("localhost", 4444, "*safari", "http://www.google.co.uk"); selenium.Start (); verificationErrors = new StringBuilder (); } [TearDown] public void TeardownTest () { try { selenium.Stop (); } catch (Exception) { // Ignore errors if unable to close the browser } Assert.AreEqual ("", verificationErrors.ToString ()); } [Test] public void GoogleHomepageTests () { // Open Google search engine. selenium.Open ("http://www.google.com/"); // Assert Title of page. Assert.AreEqual ("Google", selenium.GetTitle ()); // Provide search term as "Selenium OpenQA" selenium.Type ("q", "Selenium OpenQA"); // Read the keyed search term and assert it. Assert.AreEqual ("Selenium OpenQA", selenium.GetValue ("q")); // Click on Search button. selenium.Click ("btnG"); // Wait for page to load. selenium.WaitForPageToLoad ("5000"); // Assert that "www.openqa.org" is available in search results. Assert.IsTrue (selenium.IsTextPresent ("www.openqa.org")); // Assert that page title is - "Selenium OpenQA - Google Search" Assert.AreEqual ("Selenium OpenQA - Google Search", selenium.GetTitle ()); } } } Any ideas? Is it a OSX/Mono thing?

    Read the article

  • SubViewTwoController undeclared (first use in this function) (obj-c)

    - by benny
    Ahoy hoy everyone :) Here is a list of links. You will need it when reading the post. I am a newbie to Objective-C and try to learn it for iPhone-App-Development. I used the tutorial linked in the link list to create a standard app with a simple basic Navigation. This app contains a "RootView" that is displayed at startup. The startup screen itself contains three elements wich all link to SubViewOne. I have got it to work this far. So what i want to change is to make the second element link to SubViewTwo. When i "Build and Go" it, i get the following errors: RootViewController.m: SubViewTwoController *subViewTwoController = [[SubViewTwoController alloc] init]; // SubViewTwoController undeclared (first use in this function) and in SubViewTwoController.m [super didReceiveMemoryWarning]; // Releases the view if it doesn't have a superview no superclass declared in @interface for ´SubViewTwoController´ and the same thing after - (void)dealloc { [super dealloc]; I think you will also need the header files, so here they are! RootViewController.h #import <UIKit/UIKit.h> @interface RootViewController : UITableViewController { IBOutlet NSMutableArray *views; } @property (nonatomic, retain) IBOutlet NSMutableArray *views; @end SubViewOneController.h #import <UIKit/UIKit.h> @interface SubViewOneController : UIViewController { IBOutlet UILabel *label; IBOutlet UIButton *button; } @property (retain,nonatomic) IBOutlet UILabel *label; @property (retain,nonatomic) IBOutlet UIButton *button; - (IBAction) OnButtonClick:(id) sender; @end and SubViewTwoController.h #import <UIKit/UIKit.h> @interface SubViewTwo : UIViewController { IBOutlet NSMutableArray *views; } @end I would be really great if you would leave your ideas with a short explanation. Thanks a lot in advance! benny

    Read the article

  • SSAS Cube reprocessing fails - then succeeds if I try again

    - by EdgarVerona
    So I'm basically brand new to the concept of BI, and I've inherited an existing ETL process that is a two step process: 1) Loads the data into a database that is only used by the cube processing 2) Starts off the SSAS cube processing against said database It seems pretty well isolated, but occasionally (once a week, sometimes twice) it will fail with the following exception: "Errors in the OLAP storage engine: The attribute key cannot be found" Now the interesting thing is that: 1) The dimension having the issue is not usually the same one (i.e. there's no single dimension that consistently has this failure) 2) The source table, when I inspect it, does actually contain the attribute key that it says could not be found And, most interestingly... 3) If I then immediately reprocess the dimensions and cubes manually through SSMS, they reprocess successfully and without incident. In both the aforementioned job and when I reprocess them through SSMS, I am using "ProcessFull", so it should be reprocessing them completely. Has anyone run into such an issue? I'm scratching my head about it... because if it was a genuine data integrity issue, reprocessing the cube again wouldn't fix it. What on earth could be happening? I've been tasked with finding out why this happens, but I can neither reproduce it consistently nor can I point to a data integrity problem as the root cause. Thanks for any input you can provide!

    Read the article

  • Compiling x264 with mp4 support problem

    - by johnas
    I'm trying to compile x264 with mp4 output support. I download the latest version from their git by typing git clone git://git.videolan.org/x264.git When I run ./configure it configures and I'm able to make it. But when i try to configure it with ./configure --enable-mp4-output and then try to make it, it returns a strange error, indicating that there is a compilation error. The error message looks like: ... Lots of similar errors ... output/mp4.c:297: warning: implicit declaration of function ‘gf_isom_add_sample’ output/mp4.c:297: error: ‘mp4_hnd_t’ has no member named ‘p_file’ output/mp4.c:297: error: ‘mp4_hnd_t’ has no member named ‘i_track’ output/mp4.c:297: error: ‘mp4_hnd_t’ has no member named ‘i_descidx’ output/mp4.c:297: error: ‘mp4_hnd_t’ has no member named ‘p_sample’ output/mp4.c:299: error: ‘mp4_hnd_t’ has no member named ‘p_sample’ output/mp4.c:300: error: ‘mp4_hnd_t’ has no member named ‘i_numframe’ I've tried different releases. I've installed gpac, ffmpeg, and tried numerous tips from the net. But still can't get it to work. The reason I want it with mp4 output is because I want to use ffmpeg to create mp4 files encoded with x264. I'm running Ubuntu Server 9.10 32 bits.

    Read the article

  • Microsoft JScript runtime error: '(function name)' is undefined

    - by Velika2
    Microsoft JScript runtime error: 'txtGivenName_OnFocus' is undefined After adding what I thought was unrelated javascript code to a web page, I am suddenly getting errors that suggest that the browser cannot locate a javascript function that, to me, appears plain as day in design mode. I'm thinking that this is a load sequence order problem of some sort. Originally, my script was at the bottom of the page. I did this with the intent of helping my site's SEO ranking. When I moved the function to the top of the web page, the error went away. Now it is back. I have a feeling someone is going to suggest a jQuery solution to execute some code only when the page is fully loaded. I'm I ignorant of jQuery. IfjQuery is given in the answer, please explain what I need to do (references, placement of script files) for VS 2010 RTM. I am trying to set the focus to the first textbox on the webpage and preselect all of the text in the textbox More info: If I disable this Validator, the problem goes away: <asp:CustomValidator ID="valSpecifyOccupation" runat="server" ErrorMessage="Required" ClientValidationFunction="txtSpecifyOccupation_ClientValidate" Display="Dynamic" Enabled="False"></asp:CustomValidator> function txtSpecifyOccupation_ClientValidate(source, args) { var optOccupationRetired = document.getElementById("<%=optOccupationRetired.ClientID %>"); if (optOccupationRetired.checked) { args.IsValid = true; } else { var txtSpecifyOccupation = document.getElementById("<%=txtSpecifyOccupation.ClientID %>"); args.IsValid = ValidatorTrim(txtSpecifyOccupation.value) != ""; } }

    Read the article

  • Rename a file with perl

    - by perlnoob
    I have a file in a different folder I want to rename in perl, I was looking at a solution earlier that showed something like this: for (<backup.rar>) { my $file = $_; my $new = $_ 'backup'. @test .'.rar'; rename $file, $new or die "Error, can not rename $file as $new: $!"; } however backup.rar is in a different folder, I did try putting "C:\backup\backup.rar" in the < above, however I got the same error. C:\Program Files\WinRARperl backup.pl String found where operator expected at backup.pl line 35, near "$_ 'backup'" (Missing operator before 'backup'?) syntax error at backup.pl line 35, near "$_ 'backup'" Execution of backup.pl aborted due to compilation errors. I was using # Get time my @test = POSIX::strftime("%m-%d-%Y--%H-%M-%S\n", localtime); print @test; To get the current time, however I couldn't seem to get it to rename correctly. What can I do to fix this? Please note I am doing this on a windows box.

    Read the article

  • using fopen on uploaded file with php

    - by Patrick
    Im uploading a file, and then attempting to use fgetcsv to do things to it. This is my script below. Everything was working fine before i added the file upload portions. Now its not showing any errors, its just not displaying the uploaded data. Im getting my "file uploaded" notice, and the file is saving properly, but the counter for number of entries is showing 0. if(isset($_FILES[csvgo])){ $tmp = $_FILES[csvgo][tmp_name]; $name = "temp.csv"; $tempdir = "csvtemp/"; if(move_uploaded_file($tmp, $tempdir.$name)){ echo "file uploaded<br>"; } $csvfile = $tempdir.$name; $fh = fopen($csvfile, 'r'); $headers = fgetcsv($fh); $data = array(); while (! feof($fh)) { $row = fgetcsv($fh); if (!empty($row)) { $obj = new stdClass; foreach ($row as $i => $value) { $key = $headers[$i]; $obj->$key = $value; } $data[] = $obj; } } fclose($fh); $c=0; foreach($data AS $key){ $c++; $phone = $key->PHONE; $fax = $key->Fax; $email = $key->Email; // do things with the data here } echo "$c entries <br>"; }

    Read the article

  • silverlight 3: long running wcf call triggers 401.1 (access denied)

    - by sympatric greg
    I have a wcf service consumed by a silverlight 3 control. The Silverlight client uses a basicHttpBindinging that is constructed at runtime from the control's initialization parameters like this: public static T GetServiceClient<T>(string serviceURL) { BasicHttpBinding binding = new BasicHttpBinding(Application.Current.Host.Source.Scheme.Equals("https", StringComparison.InvariantCultureIgnoreCase) ? BasicHttpSecurityMode.Transport : BasicHttpSecurityMode.None); binding.MaxReceivedMessageSize = int.MaxValue; binding.MaxBufferSize = int.MaxValue; binding.Security.Mode = BasicHttpSecurityMode.TransportCredentialOnly; return (T)Activator.CreateInstance(typeof(T), new object[] { binding, new EndpointAddress(serviceURL)}); } The Service implements windows security. Calls were returning as expected until the result set increased to several thousand rows at which time HTTP 401.1 errors were received. The Service's HttpBinding defines closeTime, openTimeout, receiveTimeout and sendTimeOut of 10 minutes. If I limit the size of the resultset the call suceeds. Additional Observations from Fiddler: When Method2 is modified to return a smaller resultset (and avoid the problem), control initialization consists of 4 calls: Service1/Method1 -- result:401 Service1/Method1 -- result:401 (this time header includes element "Authorization: Negotiate TlRMTV..." Service1/Method1 -- result:200 Service1/Method2 -- result:200 (1.25 seconds) When Method2 is configured to return the larger resultset we get: Service1/Method1 -- result:401 Service1/Method1 -- result:401 (this time header includes element "Authorization: Negotiate TlRMTV..." Service1/Method1 -- result:200 Service1/Method2 -- result:401.1 (7.5 seconds) Service1/Method2 -- result:401.1 (15ms) Service1/Method2 -- result:401.1 (7.5 seconds)

    Read the article

  • Problem while executing test case in VS2008 test project

    - by sukumar
    Hi all I have the situation as follows I have develpoed one test project in visual studio 2008 to test my target project. I was getting the following exception when i ran test case in my PC System.IO.FileNotFoundException: The specified module could not be found. (Exception from HRESULT: 0x8007007E) at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) at System.Reflection.Assembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm, Boolean forIntrospection, StackCrawlMark& stackMark) at System.Reflection.Assembly.LoadFrom(String assemblyFile) at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.GetType(UnitTestElement unitTest, String type) at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.ResolveMethods(). but the same project runs successfully in my colleague PC. as per my Understanding System.IO.FileNotFoundException will occur in case of missing out the dlls. i checked up with dependency walker to trace out the missed dll.dependency walke traced out the following dlls 1)MFC90D.dll 2)mSvcr90d.dll 3)msvcp90d.dll i copied this dlls to C:\windows\system32 from Microsoft visual studio 9.0 dir and again i ran the dependency walker.this time dependency walker is able to open the given testproject dll with 0 errors .even then the same exception comes up when i ran the test. i got fed up with this. can any one tell why it is behaving as PC dependent.is there any thing that i still missing? any suggestion can be helpfull Thakns in Advance Sukumar i

    Read the article

  • How to recursive rake? -- or suitable alternatives

    - by TerryP
    I want my projects top level Rakefile to build things using rakefiles deeper in the tree; i.e. the top level rakefile says how to build the project (big picture) and the lower level ones build a specific module (local picture). There is of course a shared set of configuration for the minute details of doing that whenever it can be shared between tasks: so it is mostly about keeping the descriptions of what needs building, as close to the sources being built. E.g. /Source/Module/code.foo and cie should be built using the instructions in /Source/Module/Rakefile; and /Rakefile understands the dependencies between modules. I don't care if it uses multiple rake processes (ala recursive make), or just creates separate build environments. Either way it should be self-containable enough to be processed by a queue: so that non-dependent modules could be built simultaneously. The problem is, how the heck do you actually do something like that with Rake!? I haven't been able to find anything meaningful on the Internet, nor in the documentation. I tried creating a new Rake::Application object and setting it up, but whatever methods I try invoking, only exceptions or "Don't know how to build task ':default'" errors get thrown. (Yes, all rakefiles have a :default). Obviously one could just execute 'rake' in a sub directory for a :modulename task, but that would ditch the options given to the top level; e.g. think of $(MAKE) and $(MAKEFLAGS). Anyone have a clue on how to properly do something like a recursive rake?

    Read the article

  • Am I Writing Assembly Or NASM?

    - by cam
    I'm fed up with this. I've been trying to just get a grip on assembly for awhile, but I feel like I'm coding towards my compiler rather than a language. I've been using this tutorial, and so far it's giving me hell. I'm using NASM, which may be the problem, but I figured it was the most popular one. I'm simply trying to learn the most general form of assembly, so I decided to learn x86. I keep running into stupid errors, like not being able to increment a variable. Here's the latest one: not being able to use div. mov bx, 0; mov cx, 0; jmp start; start: inc cx; mov ax, cx; div 3; <-- invalid combination of opcode and operand cmp ah,0; jz totalvalue; mov ax, cx; div 5; <-- invalid combination of opcode and operand cmp ah, 0; jz totalvalue; cmp cx, 1000; jz end; totalvalue: add bx,cx; jmp start; jmp end; end: mov ah,4ch; mov al,00; int 21h; Should I change compilers? It seems like division should be standard. Do I need to read two tutorials (one on NASM, and one on x86?). Any specific help on this problem?

    Read the article

  • Problem with ActionScript 3.0 button to URL and root movieclip

    - by aarontb
    Okay, so, here's what the problem is. I'm creating a flash site with each page being it's own movieclip and Scene 1 being the menu and other things that stay on the site. I've created a MovieClip called 'HowWorksScene'. The movieclip has 2 buttons that link out to different URLs, however, I'm sure that when 1 of the button scripts work, the same script will work for the other...so here's the problem that I'm having with the Button stop(); VidDemo_btn.addEventListener(MouseEvent.CLICK, video); function video(event:MouseEvent):void { var link:URLRequest = new URLRequest('www.youtube.com'); navigateToURL(link); } Problem is that I cannot GET to that frame to even determine an error. The problem preventing me from getting to this point is a call function. In the "HomePage" movieclip, when the button is pressed to go to the next scene, "Homepage" fades out and flys left then the next frame is 1 frame but activates the next movieclipe "HowWorksScene"...but without errors, it simply goes to frame 17 of "Homepage". I've tried doing _root.gotoAndPlay(17); but get an undefined error. So, I guess my question is: What is the BEST way to direct from within a movieclip to a frame in the parent Scene? I've even tried using gotoAndPlay(17, "Scene 1"); And that still did not work. Please let me know ASAP!

    Read the article

  • UIAlertView clickedButtonAtIndex with presentModalViewController

    - by Vivas
    Hi, I am trying to call a view via presentModalViewController from a UIAlertView button. The code is below, the NSlog is displayed in the console so I know that code execution is indeed reaching that point. Also, there are no errors or anything displayed: - (void)alertView:(UIAlertView *)alertView clickedButtonAtIndex:(NSInteger)buttonIndex { if (buttonIndex != [alertView cancelButtonIndex]) { NSLog(@" The username is: %@ AND the password is: %@ ",textField.text,passTextField.text); // do some logic in here later CompanyViewController *companyViewController = [[[CompanyViewController alloc] initWithNibName:@"CompanyViewController" bundle:nil] autorelease]; [self presentModalViewController:companyViewController animated:YES]; } [textField resignFirstResponder]; [passTextField resignFirstResponder]; } * Edit: The method above belongs to a UIViewController. Below is the interface file: @interface testingViewController : UIViewController <UIAlertViewDelegate, UITextFieldDelegate> { UITextField *textField; UITextField *passTextField; } @property (nonatomic, retain) UITextField *textField; @property (nonatomic, retain) UITextField *passTextField; @property (readonly) NSString *enteredText; @property (readonly) NSString *enteredPassword; @end Any help is appreciated.

    Read the article

< Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >