Search Results

Search found 13718 results on 549 pages for 'browser compability'.

Page 442/549 | < Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449  | Next Page >

• CouchDB Errors: "undefined symbol: js_fgets" on Ubuntu 10.04

  - by MattEzell

  Hello, ServerFault Community. I have been wrestling with this problem for weeks without resolution and was hoping that someone here might be able to help. As indicated above, this is in Ubuntu 10.04 (x86) using CouchDB 0.11.0. I have build and installed CouchDB 0.11.0 from source. Everything with the dependencies and with the CouchDB install itself 'goes off without a hitch' - no errors or complaints in the configure, make or install... CouchDB seems to be running 'fine'. I can access Futon without issue and utilize all CouchDB functionality found in Futon... Unfortunately, when I attempt to use any shows/views for an installed Couch App, I get the above js_fgets error before terminal (and the Couch log) fills up with TONS of JSON. Nothing ever renders in the browser, though Firebugs reports. I have used the official instructions (paying special attention to the 10.04 instructions) and have followed pretty much every Google thread that I can find on similar issues. I have chase SpiderMonkey (and Rhino) as well as Erlang as the culprit, but despite reinstalls and tests with these components, I still cannot get past this CouchDB issue on my system... Ideas? Pointers? Suggestions? Has anyone successfully installed and used CouchDB 0.11.0 on an Ubuntu 10.04 system to RUN APPLICATIONS? I have come across multiple individuals who immediately respond 'yes, I have it installed - it works great' only to have them realize in the end (as I did) that just because Futon thinks things are working, doesn't mean CouchDB is properly handling ALL requests. Thank you for your time and assistance!

  Read the article

• Win XP error 0x80041003 using GetObject/winmgmts

  - by John Lewis

  My computer is called "neil" and I want to set some values using WMI in vbScript. I adapetd the script below from one supplied by Microsoft. When I run it in my browser I get Error Type: (0x80041003) /dressage/30/pdf2.asp, line 8 I suspect it is some registry/security setting. Any advice? John Lewis FULL SCRIPT call Print_HTML_Page("http://neil/dressage/ascii.asp", "ascii") Sub SetPDFFile(strPDFFile) Const HKEY_LOCAL_MACHINE = &H80000002 strKeyPath = "SOFTWARE\Dane Prairie Systems\Win2PDF" strComputer = "." Set objReg=GetObject( _ "winmgmts:{impersonationLevel=impersonate}!\\" & _ strComputer & "\root\default:StdRegProv") strValueName = "PDFFileName" objReg.SetExpandedStringValue HKEY_LOCAL_MACHINE,_ strKeyPath,strValueName,strPDFFile End Sub Sub Print_HTML_Page(strPathToPage, strPDFFile) SetPDFFile( strPDFFile ) Set objIE = CreateObject("InternetExplorer.Application") 'From http://www.tek-tips.com/viewthread.cfm?qid=1092473&page=5 On Error Resume Next strPrintStatus = objIE.QueryStatusWB(6) If Err.Number 0 Then MsgBox "Cannot find a printer. Operation aborted." objIE.Quit Set objIE = Nothing Exit Sub End If With objIE .visible=0 .left=200 .top=200 .height=400 .width=400 .menubar=0 .toolbar=1 .statusBar=0 .navigate strPathToPage End With 'Wait until IE has finished loading Do while objIE.busy WScript.Sleep 100 Loop On Error Goto 0 objIE.ExecWB 6,2 'Wait until IE has finished printing WScript.Sleep 2000 objIE.Quit Set objIE = Nothing End Sub

  Read the article

• HTTP responses curl and wget different results

  - by Fab

  To check HTTP response header for a set of urls I send with curl the following request headers foreach ( $urls as $url ) { // Setup headers - I used the same headers from Firefox version 2.0.0.6 $header[ ] = "Accept: text/xml,application/xml,application/xhtml+xml,"; $header[ ] = "text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5"; $header[ ] = "Cache-Control: max-age=0"; $header[ ] = "Connection: keep-alive"; $header[ ] = "Keep-Alive: 300"; $header[ ] = "Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7"; $header[ ] = "Accept-Language: en-us,en;q=0.5"; $header[ ] = "Pragma: "; // browsers keep this blank. curl_setopt( $ch, CURLOPT_URL, $url ); curl_setopt( $ch, CURLOPT_USERAGENT, 'Googlebot/2.1 (+http://www.google.com/bot.html)'); curl_setopt( $ch, CURLOPT_HTTPHEADER, $header); curl_setopt( $ch, CURLOPT_REFERER, 'http://www.google.com'); curl_setopt( $ch, CURLOPT_HEADER, true ); curl_setopt( $ch, CURLOPT_NOBODY, true ); curl_setopt( $ch, CURLOPT_RETURNTRANSFER, true ); curl_setopt( $ch, CURLOPT_FOLLOWLOCATION, true ); curl_setopt( $ch, CURLOPT_HTTPAUTH, CURLAUTH_ANY ); curl_setopt( $ch, CURLOPT_TIMEOUT, 10 ); //timeout 10 seconds } Sometimes I receive 200 OK which is good other time 301, 302, 307 which I consider good as well, but other times I receive weird status as 406, 500, 504 which should identify an invalid url but when I open it on the browser they are fine for example the script returns http://www.awe.co.uk/ => HTTP/1.1 406 Not Acceptable and wget returns wget http://www.awe.co.uk/ --2011-06-23 15:26:26-- http://www.awe.co.uk/ Resolving www.awe.co.uk... 77.73.123.140 Connecting to www.awe.co.uk|77.73.123.140|:80... connected. HTTP request sent, awaiting response... 200 OK Does anyone know which request header I am missing or adding in excess?

  Read the article

• Google Chrome sync: limit for bookmarks & extensions?

  - by Lyubomyr Shaydariv

  Actually, Chrome is my favorite web-browser, and one of its most powerful features is synchronizing the actual data into a Google account. For the last years I gained a lot of bookmarks and from time to time browse the extensions gallery to find new valuable ones. Really, synchronizing between my work and home PC's freed me from manual sync. And for the recent months I experience strange glitches. I guess it may be caused by a lot of stored bookmarks (potentially about 3K [in estimate], but please don't ask why :)) and extensions (about 130 installed but only 10-15 daily used). I can mention the following strange things: Recently added bookmarks sometimes are not synchronized (e.g. I put a bookmark at work, but it's not guaranteed I can see it that evening), despite about:sync indicates a good sync process. Sometimes recently modified bookmarks appear in either (let's call) last at home or last at work bookmark folders. Sometimes bookmarks are not synced at all. (Moreover, Chromium versions may even crash) Extensions are not synced now at all. Perhaps, there's another reason, but Google Mail Checker and Google Reader Notifier do not show indicators of incoming e-mails and news. ... I'm not sure but it looks like I might exceed Chrome internal sync limits... Is it right? Are there any workarounds, or should I make a massive bookmarks/extensions cleanup (I really don't want it :()? I mostly use Google Chrome Canary builds, and the my current one is 12.0.732.0. Thanks in advance. Update #1 (2001-04-19): I removed about 50 extensions that I'm not interested in (or that I consider as trash), and gained pretty some results: The extensions count is below 100 (exactly 97); The chrome://extensions page does not get slow (or even frozen) any more on enabling/disabling/uninstalling extensions; The extensions are seem to be synchronized now again.

  Read the article

• ESXi 4.1 host not recognising existing VMFS datastore

  - by ThatGraemeGuy

  Existing setup: host1 and host2, ESX 4.0, 2 HBAs each. lun1 and lun2, 2 LUNs belonging to the same RAID set (my terminology might be sketchy here). This has been working just fine all along. I added host3, ESXi 4.1, 2 HBAs. If I view Configuration / Storage Adapters, I can see that both HBAs see both LUNs, but if I view Configuration / Storage, I only see 1 datastore. host1/2 can see both LUNs and I have VMs running on both too. I have rescanned, refreshed and even rebooted, but host3 refuses to acknowledge 1 of the datastores. Does anyone know what's going on? Update: I re-installed the host with ESX (not i) 4.0, same version as the existing hosts and it's still not recognising the vmfs. I think I'm going to SVmotion everything off that datastore then format it. Update2: I've created the LUN from scratch and the problem gets even weirder. I've presented the LUN to all 3 hosts, and I can see the LUN in the vSphere client's Configuration / Storage Adapters section on all 3 hosts. If I create a datastore on the LUN via the Configuration / Storage section on host1, it works fine and I can create an empty folder via datastore browser, but the datastore is not seen by the host2 and host3. I can use the Add Storage wizard on host2 and it will see the LUN. At this point the "VMFS Label" column has the label I gave with "(head)" appended. If I try the Add Storage wizard's "Keep the existing signature" option, it fails with an error "Cannot change the host configuration." and a dialog box that says 'Call "HostStorageSystem.ResolveMultipleUnresolvedVmfsVolumes" for object "storageSystem-17" on vCenter Server "vcenter.company.local" failed.' If I try the Add Storage wizard's "Assign a new signature" option on host2, it will complete and the VMFS label will have "snap-(hexnumber)-" prepended. At this point its also visible on host3, but not host1. I have a similar setup in a different datacenter which didn't give me all this trouble.

  Read the article

• Proxy Settings per Machine not working on windows server 2008 R2 SP1

  - by Anirudh Goel

  i have a very interesting problem and would appreciate any help for it. In my scenario i have scripts which bring up a VM inside a domain. Now i want to enable internet access for all the VM's and they go through a proxy. I interact with the VM's using remote sessions and use the credentials of a user which belogs to the domain administrator group. Now problem is that, i create VM's on the fly and destroy them as well,and the scripts i run during their lifetime require internet access on them.So i cannot statically set the proxy settings thus i used the option of Active Directory Group Policy Management. I initially used the "User Configuration" option and set the proxy, which worked like a charm when ever i log inside the machine. However it doesn't work if i use to remote login to the machine with an account which has not yet logged in to the machine. So i used this link to configure it to work on Per Machine, the group policy has worked fine and it reflects in the browser too. But i am not able to resolve any dns name like http://www.google.com or any internet based site. Any idea what i can do?

  Read the article

• What's wrong with my VirtualHost?

  - by johnlai2004

  I have the following VirtualHost // filename: /etc/apache2/sites-available/ccbbbcc <VirtualHost 1.1.1.1:80> ServerAdmin [email protected] ServerName ccbbbcc.com ServerAlias www.ccbbbcc.com DocumentRoot /srv/www/ccbbbcc/production/public_html/ ErrorLog /srv/www/ccbbbcc/production/logs/error.log CustomLog /srv/www/ccbbbcc/production/logs/access.log combined </VirtualHost> And then I also have //filename: /etc/apache2/sites-available/default <VirtualHost 1.1.1.1:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> blah blah blah How come when I type into my browser http://1.1.1.1, it takes me to http://ccbbbcc.com ? Even when I point new urls to the IP 1.1.1.1, webpages serve from http://ccbbbcc.com. Why is the ccbbbcc.com overriding all my other virtual hosts? Why am I unable to serve pages from /var/www directory? I've made sure to use a2ensite and to restart apache. This is what my /etc/apache2/ports.conf looks like NameVirtualHost 1.1.1.1:80 Listen 80 Listen 443

  Read the article

• Apache2.2 not responding on Windows 7 desktop

  - by Adam

  Afternoon! I'm having some trouble with Apache2.2 on Windows 7. For over a year it's been running no problem, but all of a sudden requests have just stopped responding. They don't ever time out, the browser just keeps on waiting for a response, which makes me think it's something blocking communication with Apache. Interestingly though, if I stop Apache the requests fail immediately. The Apache service is running, and using netstat I can see it listening on port 80 as configured: TCP 127.0.0.1:80 0.0.0.0:0 LISTENING If I stop the Apache service, that line disappears. I have an entry within my hosts file for each VHost I'm trying, all pointing to 127.0.0.1. Each VHost is configured to *:80. Nothing however is getting recorded in the access or error (at debug level) log files. I've verified the file paths are correct, even though they were never changed. Neither is anything getting recorded within Windows' Event Log. The problem showed up when I added a new VHost and restarted, however I hadn't been using it for a couple of days prior so I don't believe it's the config change. I have performed a syntax check to be sure, and when starting from the command prompt no errors are reported there. I do have Windows Firewall running, however I've verified the Apache rule is correct and tried turning it off to ensure that wasn't the problem. I've reinstalled Apache, in the hope it might magically fix something using the default config, but still no joy. I've also tried using a different port. I'm completely lost for ideas now. Can anybody help? Cheers Adam

  Read the article

• Should I use Evernote or Org-mode for taking notes?

  - by tobeannounced

  I am looking for an app that will help me manage my notes, and after coming across Org-mode, I was wondering whether Org-mode's functionality is strong enough that it can remove the need for me to use another note taking app (because org is more of a task management app), such as Evernote. My wishes for a note taking app are: can be accessed offline in some form, eg through an iPhone app or desktop client Org-Mode and Evernote can both do this, however it seems like MobileOrg is more aimed at tasks, rather than notes? If this is the case, I probably would use Evernote in addition to MobileOrg. I can clip web content into easily for research Evernote has the browser extension, how is it with Org-Mode? I know I can use c-c c-l, but how suited is it really for taking notes on stuff I am browsing in Chrome/Firefox? has voice notes on the iPhone and computer too, if possible Org-Mode cannot do this on the iPhone, on the computer could I record audio externally and then link the files in? I can add notes too on my iPhone & computer while not connected to the internet both can do this. The types of notes I am likely to have include: howtos/things I have learnt, documentation on my setup/stuff, research on things I may do in the future, ideas, and task specific notes. I have thought about where I would want to access each of these notes and will post that here if you think it would help. So, is Org-mode strong enough in note-taking and the requirements I listed that I can avoid the need to use a separate tool for taking notes?

  Read the article

• `:Zone.Identifier` files keep on appearing in Windows XP virtual machine

  - by Jonathan Reno

  I have a Windows XP Home Edition guest and a Linux Mint 13 host. I use VirtualBox and the ~/Public directory is shared with the guest. It sometimes happens that I use IE on the guest system to download files (until I get a better Windows browser). All of the downloaded files go the the L:\ drive (the ~/Public directory). When they are finished downloading, Windows Explorer adds a :Zone.Identifier file for each file I download. When I extract a downloaded ZIP archive on the guest (on drive L:\), Windows creates a :Zone.Identifier file for every file in the extracted directory. This even occurs if I use the host to move a file to the ~/Public directory. The shared ~/Public directory is on an ext4 partition and the colon character is supposed to be illegal in file names in Windows, but not on the ext4 partition. Is there any way to stop Windows from putting all this rubbish on my filesystem? (I might have to create a shell script to clean up after Windows' act.) Here is what I see in Windows Explorer: By the way, if I were running a Mac OS X host (where colons are illegal file name characters) this would be even more horrendous.

  Read the article

• How to point a subdomain to local server with dynamic IP

  - by jlego

  I see there are many related questions to this one, however the answers given seem to be a little vague for a novice like me. I've got a dedicated LAMP stack running Fedora 16 locally on my home network. Everything works fine internally. I can access the Apache server from other machines on the network using the internal IP in a browser. I'm using the stack for a local file server as well as a development environment for websites. There are a couple of reasons why I would like the development sites hosted on the machine to be available publicly. 1.) I use a CMS that has paid add-ons which allows you to assign the paid license to a domain. I can't develop with paid add-ons on the closed dev server. 2.) I would occasionally like for clients to be able to view the site dev at late stages before it goes live. I have a domain (foo.com, and I want to point a *sub*domain (dev.foo.com) to the local server. I know this is best accomplished with a Static IP, however my IP from my ISP is Dynamic and I don't think there is any way to change that. From what I have read, services like ZoneEdit & DynDNS are supposed to be able to accomplish this, but I have tried both and found it very confusing. Also the server is behind a router and I have also read that you need to set up DDNS(?) in your router, that many routers have presets for these services, and I've found that DynDNS is the only one my router seems to support.

  Read the article

• Local DNS and Apache Server Configuration Interferring - example.com / www.example.com

  - by nicorellius

  I have a domain for my site: example.com I am also running local DNS with these lines: www IN CNAME server.<host_provider>.com. dev IN CNAME server.<host_provider>.com. So www.example.com and dev.example.com go to production and development sites, respectively, that are hosted by a host company. In my Apache configuration for the main site, I'm running a rewrite rule like this: RewriteEngine ON RewriteCond %{HTTP_HOST} ^example\.com$|!dev\.example\.com$ [NC] RewriteRule ^(.*)$ http://www\.%{HTTP_HOST}/$1 [R=302,L,NE] This rule seems to work, as when you are off the network and go to example.com in the browser, you get redirected to www.example.com. The problem is when I'm on the network, and I go to example.com I get an error page, saying page can't be found. No server errors; just a page can't be found, as if the local DNS is causing it to stop looking at that point. I'm also using Nettica for DNS service and have this A record in place: example.com Host (A) Default xxx.xx.xxx.xx This handles the external DNS, but my problem seems to be related to my internal DNS. For example, inside my network, I can go to servers on the network with addresses like this: server.example.com server1.example.com server2.example.com These are configured in my local DNS. I'm just not sure how to get past the "empty" subdomain and go to example.com. Adding to this since it might not be clear. If I'm out side the example.com network, on another network, like example123.com, then when I go to example.com I'm redirected to www.example.com as expected, eg, the Apache rewrite rule is working. Thanks in advance for any information.

  Read the article

• Need help to configure file:default on apache2

  - by turk182

  hi all!! im trying to use xen on ubuntu 8.04 hardy heron, because it is a project that assign to me in my new job, i have already installed xen and im running the virtual machines. according to the guide that they give me, i have to configure de file: default, from apache2 directory, like this: vi /etc/apache2/sites-available/default inside of this file i have to write the next information: NameVirtualHost * VirtualHost * ServerName "www".ejemplo.com ServerAlias ejemplo.com DocumentRoot /var/www/ ProxyRequests Off Proxy * Order deny,allow Allow from all /Proxy ProxyPass /balancer-manager ! ProxyPass / balancer://mycluster/ stickysession=BALANCEID nofailover=On ProxyPassReverse / "http"://http1.ejemplo.com/ ProxyPassReverse / "http"://http2.ejemplo.com/ Proxy balancer://mycluster BalancerMember "http://10.10.2.101:8080 loadfactor=1 BalancerMember "http://10.10.2.102:8080 loadfactor=2 ProxySet lbmethod=byrequests /Proxy Location /balancer-manager SetHandler balancer-manager Order deny,allow Allow from all /Location /VirtualHost in the section of balancermember im using the ip of the virtual machine: virtual machine 1 has ip 10.10.2.101 and virtual machine 2 has ip 10.10.2.102 then i have to install apache2 on each virtual machine and restart apache2 the question is what i hace to do to verify if all of this works allegedly i have to open a browser and write "www.ejemplo.com" and suppost show something thats the reason that im ask for help cause i dont know what to do, im looking for on the web and i cant find nothing related with this... ill appreciatte your help. THXS!!! pd. i closed "www" and "HTTP" in quotes by rules of this sites cause im a new user

  Read the article

• PHP Script Won't Run - Apache2/MySQL Servers Running, PHP Installed - Ubuntu 10.04

  - by nicorellius

  I am trying to install a CRM on a Linux (Ubuntu 10.04) laptop to do some testing. Installing the current versions of Apache, MySQL and PHP, and getting the CRM to run is easy. It's when I try to go backwards and run it on a previous set of versions I run into problems. This is what I have done: I have installed Apache 2.2.14, MySQL 5.0.83, and PHP 5.2.8. When I type something like mysql --version I get back what I would expect: version and distribution info. The same goes for Apache2 and PHP. The Apache server is running and so is mysqld. So when I go to my browser and look at http://localhost/<CRM dir>/install.php Firefox offers to open the PHP file or save it, as if it doesn't recognize the file. What should happen is that I should get a welcome page and the installation wizard for this CRM distribution should start. I have tried so many different things I probably screwed up something along the way. I have restarted the servers over and over, and even recompiled the versions of MySQL and PHP with no problems. I am hoping I am overlooking something simple because I am lost. Any help is appreciated.

  Read the article

• Unable to Access Certain Websites

  - by codejoust

  Through a local network, all computers except one ubuntu machine can access 1. Adobe.com 2. Icann.org 3. Apache.org 4. Example.com. The ubuntu machine returns (in firefox): "Though the site seems valid, the browser was unable to establish a connection." Furthermore, when I traceroute those websites using the ubuntu machine, they all return ubuntu.local, and it ends there: (traceroute to icann.org (192.0.32.7), 30 hops max, 40 byte packets 1 ubuntu.local (192.168.1.105) 3000.791 ms !H 3000.808 ms !H 3000.814 ms !H I've checked the hosts file, and there isn't anything in there, and I have an apache server there so if it was redirected to localhost, I'd probably see the localhost webroot page. Thanks in advance! user@ubuntu:~$ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 192.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1 The Ubuntu Machine is one of six on the network. I'm using opendns for dns, so I do think that should be a problem.

  Read the article

• Cisco ASA with CSC module bypassing

  - by Shial

  We recently upgraded from a Watchguard X5500e Peak firewall appliance to a Cisco 5500 ASA with the CSC module. The ASA is running the 8.2 software and the CSC is on the 6.3.1172 software. We've finally gotten everything stabilized after a few weeks of pulling hairs and gnashing of teeth and now its down to trying to setup a few items that were lower on the priority list. With the watchguard we were able to go with the browser to an internal webpage and authenticate against the firewall to allow us to bypass the filters. Useful when a classroom here needs access to streaming media or an executive needs us to download a video. I'm trying to setup something similar but I'm fairly inexperienced with the Cisco devices like this ASA so I'm not sure if its treated as a VPN connection or some kind of ACL. Ideally we would want to setup more than one to limit exposure rather than one thats wide open when used. I did a search and couldn't find anything related to thing in the other questions asked here and I have had no luck googgling it either.

  Read the article

• Google Chrome doesn't delete my browsing history correctly

  - by Derfder

  I have deleted everything that I could from my browser history: chrome://settings/clearBrowserData I checked everything and select the begining of time Then when I access browsing history: chrome://history/ There is nothing (as I expected), or to be precise No history entries found. The problem is that I still see my specific search url with very specific query I have made a month ago, when I start typing the url of the website into chrome address bar. How is that possible? Where is Google stroing these data. How to get rid off them completely? I want to mention that my autosuggestion options look like this: So, what else should I delete to remove everything from autosuggestions? Right now it has some specific URLs (subpages, pages with very specific search query I have made in a month or so). I have tried restarting Chrome and restarting my computer, but the urls are still in the autosuggestion. Also I am unable to turn off the autosuggestion, even I have unchecked that option in settings. My Google Chrome version is: Version 27.0.1453.116 m (probably the latest) Btw. in Firefox deleting the history works as expected. So, I guess that this has nothing to do with the operating system I am using (Windows 7), but only it's an issue with Chrome itself.

  Read the article

• sharing a folder between linux and windows over the internet

  - by valya

  Hello Currently my job is to make websites with Django. I use many things like virtualenv, PIL, etc. The problem is, I can't stand Linux on my desktop. I like it on servers, It's greate to use it over the SSH. But for desktop? No way. But for the development Linux is quite essential. Of course almost everything is ported to Windows, but it's not as simple to use as in Linux. For example, Windows shell is awful in comparison with Linux. So I've tried Cygwin, but it's too damn slow. Every time django dev server reloads, it tooks almost 20-30 seconds. In comparison, then using "native" python on Windows or Linux, it reloads instantly. Even worse, Cygwin makes all my system very slow. I've been thinking about it and have thought up a way to go. I can share a folder with my application with some Linux box. The devserver and everything will run on that box, while I'll be happy editing files and running the browser on my Windows 7. SSH shell is much quickier and handy than Cygwin. Currently there are no Linux boxes in my home network (except for my android phone :) but I have several VDS boxes with Debian. So, how do I share a Windows folder with VDS box? I can't rely on my desktop IP but I can rely on the VDS's one. I need sharing to be as quick as possible (well, 2-3 seconds ping is OK) and "native" for both systems, so I could use a folder like a normal folder in both Windows and Linux.

  Read the article

• Creating an Apache Virtual Directory, but updating Active Directory DNS

  - by SnoConeGod

  Hello all, I'm just getting started with using the Zend Framework and am following a recommended procedure where I am supposed to create an Apache Virtual Directory for the public-facing portion of a new Zend project. I don't THINK I had any issues creating the Virtual Directory, but my knowledge of the required DNS changes is rather lacking. The dev server I'm using is on a Microsoft Windows Active Directory domain, so I've added A records for both the server name and the subdomain. Still, trying to browse to the site from a Windows 7 PC isn't working properly. What am I missing? What's the proper set of steps for getting an Apache-served subdomain to appear properly in a peer computer's web browser? Details below: server: Debian command-line only, freshly installed today with Zend Server CE LAMP stack server name: ZENDEV subdomain: SQUARE.ZENDEV AD Domain functional level: 2008 mixed (run by a mishmash of 03 and 08 servers) attempting to visit the sites: http://square.zendev and http://square.zendev.domain.local (name of domain redacted, but using the local (not com) suffix) Apache Virtual Directory added to httpd.conf: NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot "/var/www/square/public" ServerName square.localhost </VirtualHost> Is this only a problem with DNS? Or with DNS and my Virtual Directory? Thanks! John

  Read the article

• How do I hook into Tar with BASH?

  - by orb

  Long Story Short I am working with Tar archives that contain PNG images in base64 encoding. I would like to use BASH (or whatever else works) to hook into the extraction function of Tar to decode PNG images from base64 encoding to standard PNG encoding after the files are unpacked. A simple cat $input-file | base64 -d >$output-file will successfully decode the images. Is there a way I can hook into tar -xf so that users do not have to do any (or minimal) extra work to decode the images? In the GNU Tar documentation (http://www.gnu.org/software/tar/manual/html_chapter/Backups.html#SEC97) I found that there are in fact variables reserved to hold the names of functions I desire to be hooked into various moments in Tar program execution. However, the documentation explains that these variables, along with other variables that can be set to configure Tar, are located in a file named backup-specs. Unfortunately, the path to this file is not given. Further, running sudo find / -name backup-specs tells me that this file is not present on my Ubuntu version 13.04 system. Background Information not included in the Long Story Short I have been working on a browser-based (WebGL) particle effect creation application (http://www.particleeffect.org), (https://github.com/cgrabowski/webgl-particle-effect-editor), (https://github.com/cgrabowski/webgl-particle-effect). I have began to write a client-side-only solution for saving and loading effect data as a tar archive. However, since client-side JavaScript has limited capability to process binary data, the images used as textures in the effect are saved with base64 encoding. I have been able to implement saving effect data as a Tar archive (haven't pushed that to Github yet). However, the images present in said Tar archive cannot be manipulated unless they are decoded from base64 encoding.

  Read the article

• httpd 2.2.15 + suPHP + suExec + php5 = permission and information ?

  - by Prix

  Hi, i am currently playing around with suexec, suphp, php5 on my apache on slackware 13.1. Everything is installed and working properly but now i did like to got further into the directory permissions and at suphp settings and options available. initially i was planning to leave suphp disabled unless a virtualhost has it specified to be enabled but it does not seem to work, see sample: mod_php.conf which is included in my httpd.conf # # mod_php & mod_suPHP - PHP Hypertext Preprocessor module # # Load the PHP module: LoadModule php5_module lib/httpd/modules/libphp5.so # Load the suPHP module: LoadModule suphp_module lib/httpd/modules/mod_suphp.so <IfModule mod_php5.c> # Tell Apache to feed all *.php files through PHP. If you'd like to # parse PHP embedded in files with different extensions, comment out # these lines and see the example below. <FilesMatch \.php$> SetHandler application/x-httpd-php </FilesMatch> </IfModule> <IfModule mod_suphp.c> # This option tells mod_suphp if a PHP-script requested on this server (or # VirtualHost) should be run with the PHP-interpreter or returned to the # browser "as it is". suPHP_Engine off </IfModule> With the above first sample it makes suPHP and PHP not work if i comment out the php5 stuff but the module it will run just fine ... So my first question is, how could i possible make this setup work ? Leave suPHP disabled using php5 by default and if a virtualhost has suPHP enabled it will disable php5 and use suPHP. if any information is lacked here please let me know and i will update with any additional information you may need. Thanks in advance.

  Read the article

• nginx 2 symfony2 web application, one ip no domain

  - by Krzysztof Koch

  I have irritating with nginx. I set up in /usr/share/nginx/www/firstapp one application and in /usr/share/nginx/www/secondapp. in my default conf i setup that in / root localization i want first app: when write 9.9.9.9 in browser show me first app, and when i write 9.9.9.9/makeup, there not show me seccond app. Why first app displays me good, and seccondapp cannot? Please help me. Sorry for quality here pasterbin code: enter link description here server { listen 80; server_name localhost; root /usr/share/nginx/www/firstapp/web; access_log /var/log/nginx/$host.access.log; error_log /var/log/nginx/error.log error; # strip app.php/ prefix if it is present rewrite ^/app\.php/?(.*)$ /$1 permanent; location / { root /usr/share/nginx/www/firstapp/web/; index app.php; try_files $uri @rewriteapp; } location /makeup/ { alias /usr/share/nginx/www/seccondapp/web/; index app.php; try_files $uri @rewriteapp; } location @rewriteapp { rewrite ^(.*)$ /app.php/$1 last; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ ^/(app|app_dev)\.php(/|$) { #fastcgi_pass 127.0.0.1:9000; fastcgi_pass unix:/var/lib/php5-fpm/www.sock; fastcgi_split_path_info ^(.+\.php)(/.*)$; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param HTTPS off; #fastcgi_param SERVER_PORT 80; }

  Read the article

• Cannot access firewalled jboss server from Internet Explorer

  - by Simon Gibbs

  I've produced a website for a client One Single Menu using JBoss and hosted it on Rackspace Cloud Servers running Ubuntu's Maverick Meerkat. Following advice, I esablished some iptables rule to protect jboss: iptables -I INPUT 1 -i lo -j ACCEPT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 8080 iptables -I INPUT -p tcp --dport 8080 -j ACCEPT iptables -t nat -A OUTPUT -o lo -p tcp --dport 80 -j REDIRECT --to-port 8080 iptables -A INPUT -j DROP Now, several versions of IE on several computers on at least two different ISPs cannot access the onesinglemenu.com. Curl from within the datacenter, Firefox, and Safari on the same ISPs can all access the server fine. I even tried IE and Firefox on the same computer and IE failed but Firefox worked. The error behaviour is that IE hangs on connecting without reporting an error, even after a minute or so. No page is displayed at all. I find it quite odd that I'm having a browser specific connection issue, but it appears to be the case. Help!

  Read the article

• Download JDK onto a remote server

  - by itsadok

  I want to get the latest JDK onto a server in a remote location. Downloading the JDK from Sun's website requires jumping through all kinds of hoops until you actually get the file. I'm not sure exactly if they use cookies or my IP address, but simply copying the file URL and trying wget on the server doesn't work. Googling for mirrors of the JDK, I could only find old versions. Right now I'm left with the option of downloading it into my computer, then uploading it to the server. This feels slow and stupid. Anyone got a better idea? EDIT: Thanks for all the replies. Just to clarify, as I'm writing this I'm rsyncing the 78MB file to my server. It should be done in about an hour, so it's not such a big deal. However, since this is not the first time I'm doing this, I was hoping for a better solution for next time. Solution: What I ended up doing was sudo aptitude install lynx-cur www-browser http://java.sun.com/javase/downloads/ From there it's mostly using the arrow and enter keys, and answering "Yes" to a lot of lynx security questions (about cookies and certificates). Thanks to resonator.

  Read the article

• Can't connect to research.microsoft.com on home Qwest DSL connection

  - by rakingleaves

  I have a puzzling issue regarding accessing research.microsoft.com from my home Qwest DSL connection. By default, I frequently get timeouts when accessing research.microsoft.com from Firefox, Safari, or Chrome on my Mac. I also cannot access the site from Internet Explorer in a Windows VM. However, I am able to access the site through proxify.com, so I know the site is not down. Furthermore, I haven't noticed problems accessing other sites (in particular, www.microsoft.com works fine). Also, I can access research.microsoft.com when I'm connected to networks other than my home Qwest DSL connection. Together, the above make me suspect a problem with either my router (Airport Express) or, more likely, my ISP. Anyone have any thoughts on how I can narrow down the problem further? I could call my ISP and tell them the above, but my feeling is that probably won't get me very far. I can get by browsing research.microsoft.com through a proxy, but it would be nice to figure out what's going on here and fix the problem. Oh, the only relevant discussion I found via Google was here: http://forums.whirlpool.net.au/forum-replies-archive.cfm/1311734.html Update: Thanks to those who have tried to help! I found one other thing while Googling that may be vaguely relevant: http://thedaneshproject.com/posts/supportmicrosoftcom-not-working-behind-squid/ Disabling the Accept-Encoding headers in Firefox actually didn't make a difference for me. I just thought the above might spark some other ideas about how mishandling of HTTP headers somewhere might be causing this problem. Thanks again! Another update: In case anyone is still thinking about this; I've found that I can't surf research.microsoft.com using the links text-based browser, but I can reliably download individual files with wget. Maybe that helps?

  Read the article

< Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449  | Next Page >