Search Results

Search found 16794 results on 672 pages for 'memory usage'.

Page 442/672 | < Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449  | Next Page >

  • MacBookPro RAM: CL7 or CL9

    - by chris_l
    Hi, I want to increase the RAM in my MacBookPro 15", 2.53 GHz, Mid-2009. I currently have 4GB, and I want 6GB (and upgrade to 8GB later - I think this should work with my model: http://forums.macrumors.com/showthread.php?t=573906) Now I see two offers: 1x4GB DDR3 1333 CL9 9-9 (149 EUR) 1x4GB DDR3 1066 CL7 7-7 (192 EUR). Both are from the same brand (Transcend), both are labeled "For MacBook/MacBookPro". Now I have no idea, which of these would work better with the 2GB RAM module from my currently installed memory (Running at 1067 MHz, according to System Profiler - but with what CL setting?) Would the 1333 CL9 RAM be set to CL7 when running at 1066 MHz? Thanks, Chris PS Should I expect problems when I later upgrade to 8GB with a different module (in case the same module won't be produced anymore)?

    Read the article

  • Is my PC Good enough [closed]

    - by Moinak Nath
    I'm getting a new laptop this Christmas and I was wondering if it's good enough for what I do. I'll be playing games like Need for Speed: Most Wanted (2012) and other NFS games. Also silent hunter and flight sim. I also browse the internet download stuff like, watch movies occasionally type documents with word, edit videos, and transfer files. To be more specific is the hdd big enough? is the ram big enough? Is the graphics card good? is the cpu speed enough, and is Windows windows 8 good for all these things. i also video chat so these are the specs 2.2 Ghz Intel Pentium B960 Dual Core 4 GB RAM 320 GB HDD Intel HD Graphics 720p Webcam 4 USB Ports (2 USB 3.0 @ 2 USB 2.0) HDMI Port It Is a Lenovo IdeaPad This is the one im Looking at http://www.bestbuy.com/site/Lenovo+-+IdeaPad+15.6%26%2334%3B+Laptop+-+4GB+Memory+-+320GB+Hard+Drive+-+Black/6851264.p?id=1218809260330&skuId=6851264#tab=specifications

    Read the article

  • SNMP: how to get combined output of memBuffer, memCached and memAvailReal?

    - by user492160
    Below is the output of 'free -m' on my system: total used free shared buffers cached Mem: 2026 1936 90 0 212 649 -/+ buffers/cache: 1074 952 Swap: 3359 0 3359 I'd like to retrieve the value 952 of -/+ buffers/cache using 'snmpwalk'. This is for integrating 'free memory' availability with Cacti-poller. But currently the only values available are: # snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.4 UCD-SNMP-MIB::memIndex.0 = INTEGER: 0 UCD-SNMP-MIB::memErrorName.0 = STRING: swap UCD-SNMP-MIB::memTotalSwap.0 = INTEGER: 3440632 UCD-SNMP-MIB::memAvailSwap.0 = INTEGER: 3440576 UCD-SNMP-MIB::memTotalReal.0 = INTEGER: 2075556 UCD-SNMP-MIB::memAvailReal.0 = INTEGER: 92552 UCD-SNMP-MIB::memTotalFree.0 = INTEGER: 3533128 UCD-SNMP-MIB::memMinimumSwap.0 = INTEGER: 16000 UCD-SNMP-MIB::memShared.0 = INTEGER: 0 UCD-SNMP-MIB::memBuffer.0 = INTEGER: 217388 UCD-SNMP-MIB::memCached.0 = INTEGER: 664904 UCD-SNMP-MIB::memSwapError.0 = INTEGER: 0 UCD-SNMP-MIB::memSwapErrorMsg.0 = STRING: Is it possible to retrieve the combined value of memBuffer+memCached+memAvailReal using snmpwalk for graphing with Cacti and RRDTool? If not what options do I possibly have? I'm using net-snmp 5.3.2 on my agent host. Thanks in advance.

    Read the article

  • Do different operating systems have different read and write speeds?

    - by Ivan
    If I have two different operating systems, such as Windows 8 and Ubuntu, running on the same hardware, will the two operating systems have different read and write speeds? My guess is that there would be minimal difference between operating systems and read and write speeds to the hard disk since the major limited factor is seeking; however, different operating systems may use different file systems in order to attempt to reduce seek time in the hard disk. Likewise, I'm sure that modern operating systems will not actually write directly to the hard disk, and instead will just have it in memory and marked with a dirty bit. Are there any studies that show differences in read and write speeds between OSs? Or would the file system being used by the OS matter more than the OS itself?

    Read the article

  • Win7 glass-like Aero feature - unable to enable

    - by user24752
    I have a 4 months old PC with Win7 Home Premium x64. Windows Experience Index is 5.4. Intel i5 processor 6GB memory nVidia GT220 video card. During games, Windows reported shortage of system resources, so switched the desktop back to "Windows 7 Basic" desktop theme. After game-over, I could switch back to the normal theme and enjoy all Aero eye-candies. However, lately the glass-like window transparency feature got disabled, and I found no ways to enable it again. There is a Troubleshouting option in Control Panel saying: "Find and fix problems with transparency and other visual effects". If I launch that, it does not find anything. Event viewer is full with the following warnings: The Desktop Window Manager is experiencing heavy resource contention. Scenario : The Desktop Window Manager responsiveness has degraded. Taskbar, window borders, etc, none of the other transparent features work, and I cannot turn them on. Any thoughts?

    Read the article

  • 3ds Max with Parallels on a MacBook Pro

    - by Eric Koslow
    I am trying to get 3ds Max to run under Parallels on my 15'' MacBook Pro, but it is ultimatly failing. To get any decent frame rate I have to put all the setting to low, but even then I get weird graphical "gliches" when I play. Controlls are unresponsive and very laggy as well. I have increased the video memory to 256mb, but that doesn't seem to have helped. What else should I do to make the game playable? Mod-edit: I changed TF2 with a "random" 3D modelling software, which solves gaming related issues.

    Read the article

  • How do I calculate the amount of tuning needed for my server ?

    - by Low Kian Seong
    I have a server which is running a few discrete Python, Java application which most of the time imports data into a PostGreSQL database. I would like to know from people out there who have experience tuning enterprise grade servers how do i go about calculating in a holistic way the amount of tuning needed for my server for example vm.swappiness, vm.overcommit_ratio and other numerical tunings needed for my server. I tried to enable sar on my server to capture daily numbers but these are more along the lines of total numbers and I can't figure out how to allocate memory for my applications. Help would be appreciated. Thanks.

    Read the article

  • Which CPU for SQL Server machine (Xeon, i5, i7, AMD Phenom)?

    - by Tony_Henrich
    I am going to build a full height server machine to be used for SQL Server 2008 64bit. I have $400 to spend for a CPU. Which CPU should I get among i5, i7, Xeon and Phenom in terms of performance. There are so many options and I am out of touch with the latest stuff. All I know I want something fast and works with DDR3 fast memory and works with some kind of fast system bus. I don't care about overclocking, 3D & gfx benchmarks. The machine is not used for games and gfx apps. Any recommendations?

    Read the article

  • Nginx Fastcgi performance issues

    - by Barry
    I am running several fastcgi servers behind Nginx. I run 3 Nginx workers and 6 fastcgi servers as upstream backends. When I run load tests of 1 req per sec, I can clearly see that on avarage a reply is 0.1sec, but from time to time there are 3.1 sec responses. It is a suspiciously deterministic number and it happens even at very small loads from time to time. Both CPU and Memory are of no issue at all. Any idea where this delay may be comming from? Any suggestions how to debug this? Many thanks, Barry.

    Read the article

  • All Xen domU LVM volumes corrupt after reboot

    - by zcs
    I'm running a Debian Squeeze dom0, and after rebooting it all 7 of my domUs have data corruption. Each is setup as ext3 partition directly on a separate lvm2 volume. None of the lvm volumes will mount; all have bad superblocks. I've tried e2fsck with each superblock to no avail. What else can I try? Each domU has two LVM volumes connected to it, one for the disk and one for swap. The disk is mounted at root, formatted as a normal ext3 partition as a xen-blk device. The volumes are never mounted outside of the guest OS. I'm running Ubuntu 11.04 using the instructions here. I'm not sure that they didn't shutdown properly, all I know is they were corrupt after I issues a clean 'reboot' on the dom0. Here's a sample Xen config file; the rest are the same except for name, vcpus, memory, vif and disk. name = 'load1' vcpus = 2 memory = 512 vif = ['bridge=prbr0', 'bridge=eth0'] disk = ['phy:/dev/VolGroup00/load1-disk,xvda,w','phy:/dev/VolGroup00/load1-swap,xvdb,w'] #============================================================================ # Debian Installer specific variables def check_bool(name, value): value = str(value).lower() if value in ('t', 'tr', 'tru', 'true'): return True return False global var_check_with_default def var_check_with_default(default, var, val): if val: return val return default xm_vars.var('install', use='Install Debian, default: false', check=check_bool) xm_vars.var("install-method", use='Installation method to use "cdrom" or "network" (default: network)', check=lambda var, val: var_check_with_default('network', var, val)) # install-method == "network" xm_vars.var("install-mirror", use='Debian mirror to install from (default: http://archive.ubuntu.com/ubuntu)', check=lambda var, val: var_check_with_default('http://archive.ubuntu.com/ubuntu', var, val)) xm_vars.var("install-suite", use='Debian suite to install (default: natty)', check=lambda var, val: var_check_with_default('natty', var, val)) # install-method == "cdrom" xm_vars.var("install-media", use='Installation media to use (default: None)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-cdrom-device", use='Installation media to use (default: xvdd)', check=lambda var, val: var_check_with_default('xvdd', var, val)) # Common options xm_vars.var("install-arch", use='Debian mirror to install from (default: amd64)', check=lambda var, val: var_check_with_default('amd64', var, val)) xm_vars.var("install-extra", use='Extra command line options (default: None)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-installer", use='Debian installer to use (default: network uses install-mirror; cdrom uses /install.ARCH)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-kernel", use='Debian installer kernel to use (default: uses install-installer)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-ramdisk", use='Debian installer ramdisk to use (default: uses install-installer)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.check() if not xm_vars.env.get('install'): bootloader="/usr/sbin/pygrub" elif xm_vars.env['install-method'] == "network": import os.path print "Install Mirror: %s" % xm_vars.env['install-mirror'] print "Install Suite: %s" % xm_vars.env['install-suite'] if xm_vars.env['install-installer']: installer = xm_vars.env['install-installer'] else: installer = xm_vars.env['install-mirror']+"/dists/"+xm_vars.env['install-suite'] + \ "/main/installer-"+xm_vars.env['install-arch']+"/current/images" print "Installer: %s" % installer print print "WARNING: Installer kernel and ramdisk are not authenticated." print if xm_vars.env.get('install-kernel'): kernelurl = xm_vars.env['install-kernel'] else: kernelurl = installer + "/netboot/xen/vmlinuz" if xm_vars.env.get('install-ramdisk'): ramdiskurl = xm_vars.env['install-ramdisk'] else: ramdiskurl = installer + "/netboot/xen/initrd.gz" import urllib class MyUrlOpener(urllib.FancyURLopener): def http_error_default(self, req, fp, code, msg, hdrs): raise IOError("%s %s" % (code, msg)) urlopener = MyUrlOpener() try: print "Fetching %s" % kernelurl kernel, _ = urlopener.retrieve(kernelurl) print "Fetching %s" % ramdiskurl ramdisk, _ = urlopener.retrieve(ramdiskurl) except IOError, _: raise elif xm_vars.env['install-method'] == "cdrom": arch_path = { 'i386': "/install.386", 'amd64': "/install.amd" } if xm_vars.env['install-media']: print "Install Media: %s" % xm_vars.env['install-media'] else: raise OptionError("No installation media given.") if xm_vars.env['install-installer']: installer = xm_vars.env['install-installer'] else: installer = arch_path[xm_vars.env['install-arch']] print "Installer: %s" % installer if xm_vars.env.get('install-kernel'): kernelpath = xm_vars.env['install-kernel'] else: kernelpath = installer + "/xen/vmlinuz" if xm_vars.env.get('install-ramdisk'): ramdiskpath = xm_vars.env['install-ramdisk'] else: ramdiskpath = installer + "/xen/initrd.gz" disk.insert(0, 'file:%s,%s:cdrom,r' % (xm_vars.env['install-media'], xm_vars.env['install-cdrom-device'])) bootloader="/usr/sbin/pygrub" bootargs="--kernel=%s --ramdisk=%s" % (kernelpath, ramdiskpath) print "From CD" else: print "WARNING: Unknown install-method: %s." % xm_vars.env['install-method'] if xm_vars.env.get('install'): # Figure out command line if xm_vars.env['install-extra']: extras=[xm_vars.env['install-extra']] else: extras=[] # Reboot will just restart the installer since this file is not # reparsed, so halt and restart that way. extras.append("debian-installer/exit/always_halt=true") extras.append("--") extras.append("quiet") console="hvc0" try: if len(vfb) >= 1: console="tty0" except NameError, e: pass extras.append("console="+ console) extra = str.join(" ", extras) print "command line is \"%s\"" % extra root There are two LVM logical volumes connected to each VM. Here's the fdisk -l output for the disk volume: Disk /dev/VolGroup00/VMNAME-disk: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00029c01 Device Boot Start End Blocks Id System /dev/VolGroup00/VMNAME-disk1 1 1045 8386560 83 Linux And the swap volume: Disk /dev/VolGroup00/VMNAME-swap: 536 MB, 536870912 bytes 37 heads, 35 sectors/track, 809 cylinders Units = cylinders of 1295 * 512 = 663040 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004faae Device Boot Start End Blocks Id System /dev/VolGroup00/VMNAME-swap1 2 809 522240 82 Linux swap / Solaris Partition 1 has different physical/logical beginnings (non-Linux?): phys=(0, 32, 33) logical=(1, 21, 19) Partition 1 has different physical/logical endings: phys=(65, 36, 35) logical=(808, 4, 28)

    Read the article

  • Apache mpm-itk Performance

    - by Matt Beckman
    I manage a bunch of VPSs with memory ranging from 1GB to 8GB. Most of these websites are Joomla websites, and the servers must support multiple sites/users/S-FTP. I use mpm-itk almost exclusively (mostly due to it's convenience in these shared environments). However, I'm aware it isn't known for performance, so I need some advice on making it faster. Due to the lack of documentation when I first went the way of mpm-itk, I included only one setting in the config, and that was to limit each user to 50 clients (the rest I left up to defaults): <IfModule mpm_itk_module> MaxClientsVHost 50 </IfModule> Are there any better alternatives available? Are there any settings supported in mpm-prefork or mpm-worker that are also supported in mpm-itk? Thanks!

    Read the article

  • Ubuntu 10.04 with HD flash

    - by Brad Robertson
    Just noticed that 10.04 is out. My media server has been packed away for a few months but I might dust if off and give 10.04 a shot but I thought I'd see if anyone has any success stories with HD flash in either Chrome or Firefox. I'm currently running Ubuntu 9.10 and it was a large enough pain to get VDPAU working with my Zotac Ion-ITX-C board (eventually found an mplayer PPA that had it compiled in) From reading the 10.04 docs it looks like this is standard now, but I'm wondering about streaming HD, from, say flash or Divx. I've never been able to get HD flash to play without it being extremely choppy, and I chalk this up to the lack of hardware assisted decoding like VDPAU (a guess). My board certainly isn't a competitor in CPU power or memory, which is why i've needed the HW accelerated decoding for HD vids in the past. Just wondering if anyone has had any success stories playing HD vid online (flash, divx or what have you)

    Read the article

  • How do I PXE boot multiple Windows 7 desktops off the same image?

    - by Matt
    Some years ago in my uni days I recall that the uni labs booted windows nt over the network. There was a shared drive for your own stuff, and other than that any changes you did to the running OS were reset when you restarted the machine. Now I'd like to be able to do the same thing with Windows 7. I have found some howto's for this using iSCSI, but I don't want an iSCSI disk for every single PC, I'm wanting one image for multiple PC's. I've also found PXE Boot setups for installing windows locally, but that's not what I want either. How would I go about setting up what I had at uni but with Windows 7 as a OS to netboot? i.e. How do I netboot windows 7 images? I do not want to netboot a windows 7 installer to a pc to install windows locally, I want to run a windows 7 image from memory/network.

    Read the article

  • What's a good Linux distro for an older PC?

    - by jdamae
    I'm new to Linux and I am interested in installing it on an older computer I have. I want to set a web server up, and install PHP and Perl on it. My PC is an older HP Pavilion a255c, with an Intel Pentium 4 processor and 512 MB of RAM. I will probably add some more memory later. This PC is more like a sandbox than anything, but I would like to get started quickly with the OS. Is there a particular flavor of Linux I would need to download because I have an old computer? I was thinking about Ubuntu, but I'm not sure what version to go with.

    Read the article

  • Coldfusion 8 crash

    - by Denis Topa
    I have a very big problem with coldfusion 8 on Windows server 2008 with IIS7. They are in production server and sometimes the the site is not available, I have to manually end the jrun.exe process from task manager and then the site is available. I realize that the process jrun.exe has abut 1.3Gb of memory used at the time it crash's. It happens 2-3 times a day, I have looking in the coldfusion logs and I did not found anything strange beside some warnings that some job exceeded the 300 sec of time execution. I forgot to mention that coldfusion is a 32bit application but the windows is a 64bit, this may be the problem? I'm not such good in coldfusion, so If someone knows how to troubleshoot please let me know Thanks!

    Read the article

  • Choosing a very basic Linux distro with minimal boot time?

    - by user30961
    I've had Ubuntu for a year now, like it but it doesn't match my needed configuration for my old laptop. So... I am using Linux mainly for webapps so I don't care much about user interface. What I need is a distro which is small enough to install on a SD memory card (or USB) since I am removing the hard drive, all my data is in the cloud. I also want it to have as short boot time as possible. I tried Puppy Linux and it seems ok but it had preinstalled looots af small apps I don't need, I would really like to have a distro with minimal preinstallations and add them on my own. So what are my choices and why would you recommend these?

    Read the article

  • External USB attached drive works in Windows XP but not in Windows 7. How to fix?

    - by irrational John
    Earlier this week I purchased this "N52300 EZQuest Pro" external hard drive enclosure from here. I can connect the enclosure using USB 2.0 and access the files in both NTFS partitions on the MBR partitioned drive when I use either Windows XP (SP3) or Mac OS X 10.6. So it works as expected in XP & Snow Leopard. However, the enclosure does not work in Windows 7 (Home Premium) either 64-bit or 32-bit or in Ubuntu 10.04 (kernel 2.6.32-23-generic). I'm thinking this must be a Windows 7 driver problem because the enclosure works in XP & Snow Leopard. I do know that no special drivers are required to use this enclosure. It is supported using the USB mass storage drivers included with XP and OS X. It should also work fine using the mass storage support in Windows 7, no? FWIW, I have also tried using 32-bit Windows 7 on both my desktop, a Gigabyte GA-965P-DS3 with a Pentium Dual-Core E6500 @ 2.93GHz, and on my early 2008 MacBook. I see the same failure in both cases that I see with 64-bit Windows 7. So it doesn't appear to be specific to one hardware platform. I'm hoping someone out there can help me either get the enclosure to work in Windows 7 or convince me that the enclosure hardware is bad and should be RMAed. At the moment though an RMA seems pointless since this appears to be a (Windows 7) device driver problem. I have tried to track down any updates to the mass storage drivers included with Windows 7 but have so far come up empty. Heck, I can't even figure out how to place a bug report with Microsoft since apparently the grace period for Windows 7 email support is only a few months. I came across a link to some USB troubleshooting steps in another question. I haven't had a chance to look over the suggestions on that site or try them yet. Maybe tomorrow if I have time ... ;-) I'll finish up with some more details about the problem. When I connect the enclosure using USB to Windows 7 at first it appears everything worked. Windows detects the drive and installs a driver for it. Looking in Device Manager there is an entry under the Hard Drives section with the title, Hitachi HDT721010SLA360 USB Device. When you open Windows Disk Management the first time after the enclosure has been attached the drive appears as "Not initialize" and I'm prompted to initialize it. This is bogus. After all, the drive worked fine in XP so I know it has already been initialized, partitioned, and formatted. So of course I never try to initialize it "again". (It's a 1 GB drive and I don't want to lose the data on it). Except for this first time, the drive never shows up in Disk Management again unless I uninstall the Hitachi HDT721010SLA360 USB Device entry under Hard Drives, unplug, and then replug the enclosure. If I do that then the process in the previous paragraph repeats. In Ubuntu the enclosure never shows up at all at the file system level. Below are an excerpt from kern.log and an excerpt from the result of lsusb -v after attaching the enclosure. It appears that Ubuntu at first recongnizes the enclosure and is attempting to attach it, but encounters errors which prevent it from doing so. Unfortunately, I don't know whether any of this info is useful or not. excerpt from kern.log [ 2684.240015] usb 1-2: new high speed USB device using ehci_hcd and address 22 [ 2684.393618] usb 1-2: configuration #1 chosen from 1 choice [ 2684.395399] scsi17 : SCSI emulation for USB Mass Storage devices [ 2684.395570] usb-storage: device found at 22 [ 2684.395572] usb-storage: waiting for device to settle before scanning [ 2689.390412] usb-storage: device scan complete [ 2689.390894] scsi 17:0:0:0: Direct-Access Hitachi HDT721010SLA360 ST6O PQ: 0 ANSI: 4 [ 2689.392237] sd 17:0:0:0: Attached scsi generic sg7 type 0 [ 2689.395269] sd 17:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2689.395632] sd 17:0:0:0: [sde] Write Protect is off [ 2689.395636] sd 17:0:0:0: [sde] Mode Sense: 11 00 00 00 [ 2689.395639] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412003] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412009] sde: sde1 sde2 [ 2689.455759] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.455765] sd 17:0:0:0: [sde] Attached SCSI disk [ 2692.620017] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2707.740014] usb 1-2: device descriptor read/64, error -110 [ 2722.970103] usb 1-2: device descriptor read/64, error -110 [ 2723.200027] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2738.320019] usb 1-2: device descriptor read/64, error -110 [ 2753.550024] usb 1-2: device descriptor read/64, error -110 [ 2753.780020] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2758.810147] usb 1-2: device descriptor read/8, error -110 [ 2763.940142] usb 1-2: device descriptor read/8, error -110 [ 2764.170014] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2769.200141] usb 1-2: device descriptor read/8, error -110 [ 2774.330137] usb 1-2: device descriptor read/8, error -110 [ 2774.440069] usb 1-2: USB disconnect, address 22 [ 2774.440503] sd 17:0:0:0: Device offlined - not ready after error recovery [ 2774.590023] usb 1-2: new high speed USB device using ehci_hcd and address 23 [ 2789.710020] usb 1-2: device descriptor read/64, error -110 [ 2804.940020] usb 1-2: device descriptor read/64, error -110 [ 2805.170026] usb 1-2: new high speed USB device using ehci_hcd and address 24 [ 2820.290019] usb 1-2: device descriptor read/64, error -110 [ 2835.520027] usb 1-2: device descriptor read/64, error -110 [ 2835.750018] usb 1-2: new high speed USB device using ehci_hcd and address 25 [ 2840.780085] usb 1-2: device descriptor read/8, error -110 [ 2845.910079] usb 1-2: device descriptor read/8, error -110 [ 2846.140023] usb 1-2: new high speed USB device using ehci_hcd and address 26 [ 2851.170112] usb 1-2: device descriptor read/8, error -110 [ 2856.300077] usb 1-2: device descriptor read/8, error -110 [ 2856.410027] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2856.730033] usb 3-2: new full speed USB device using uhci_hcd and address 11 [ 2871.850017] usb 3-2: device descriptor read/64, error -110 [ 2887.080014] usb 3-2: device descriptor read/64, error -110 [ 2887.310011] usb 3-2: new full speed USB device using uhci_hcd and address 12 [ 2902.430021] usb 3-2: device descriptor read/64, error -110 [ 2917.660013] usb 3-2: device descriptor read/64, error -110 [ 2917.890016] usb 3-2: new full speed USB device using uhci_hcd and address 13 [ 2922.911623] usb 3-2: device descriptor read/8, error -110 [ 2928.051753] usb 3-2: device descriptor read/8, error -110 [ 2928.280013] usb 3-2: new full speed USB device using uhci_hcd and address 14 [ 2933.301876] usb 3-2: device descriptor read/8, error -110 [ 2938.431993] usb 3-2: device descriptor read/8, error -110 [ 2938.540073] hub 3-0:1.0: unable to enumerate USB device on port 2 excerpt from lsusb -v Bus 001 Device 017: ID 0dc4:0000 Macpower Peripherals, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0dc4 Macpower Peripherals, Ltd idProduct 0x0000 bcdDevice 0.01 iManufacturer 1 EZ QUEST iProduct 2 USB Mass Storage iSerial 3 220417 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Config0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 4 Interface0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Update: Results using Firewire to connect. Today I recieved a 1394b 9 pin to 1394a 6 pin cable which allowed me to connect the "EZQuest Pro" via Firewire. Everything works. When I use Firewire I can connect whether I'm using Windows 7 or Ubuntu 10.04. I even tried booting my Gigabyte desktop as an OS X 10.6.3 Hackintosh and it worked there as well. (Though if I recall correctly, it also worked when using USB 2.0 and booting OS X on the desktop. Certainly it works with USB 2.0 and my MacBook.) I believe the firmware on the device is at the latest level available, v1.07. I base this on the excerpt below from the OS X System Profiler which shows Firmware Revision: 0x107. Bottom line: It's nice that the enclosure is actually usable when I connect with Firewire. But I am still searching for an answer as to why it does not work correctly when using USB 2.0 in Windows 7 (and Ubuntu ... but really Windows 7 is my biggest concern). OXFORD IDE Device 1: Manufacturer: EZ QUEST Model: 0x0 GUID: 0x1D202E0220417 Maximum Speed: Up to 800 Mb/sec Connection Speed: Up to 400 Mb/sec Sub-units: OXFORD IDE Device 1 Unit: Unit Software Version: 0x10483 Unit Spec ID: 0x609E Firmware Revision: 0x107 Product Revision Level: ST6O Sub-units: OXFORD IDE Device 1 SBP-LUN: Capacity: 1 TB (1,000,204,886,016 bytes) Removable Media: Yes BSD Name: disk3 Partition Map Type: MBR (Master Boot Record) S.M.A.R.T. status: Not Supported

    Read the article

  • Can my laptop run dual 1080p (Sony Vaio - Nvidia 330M)

    - by Charlino
    I am looking to buy a monitor to setup dual monitors for my laptop and was wondering if my laptop could handle 2 x 1080p. I have a Sony Vaio VPCF116FG which has a Nvidia GeForce 330M chip and 1GB dedicated graphics memory. The laptop also has a Intel® Core™ i7-720QM Processor (1.60 GHz with Turbo Boost up to 2.80 GHz) but I don't know if that's relevant(?). The laptop screen has a native resolution of 1080p (1920 x 1080) so I'll be looking at buying a external monitor with 1080p to connect up using a HDMI cable. So, the question is, will my laptop be able to handle it's own 1080p screen AND an external 1080p screen? TIA, Charles

    Read the article

  • Dell Latitude e6520 gaming capabilities?

    - by user1072185
    I am purchasing a very reduced Dell Latitude e6520 from a friend and was wondering what kinds of games I could play on it and what resolutions. I'm not buying it for gaming purposes, but I am curious. The specs are as follows: Intel® Core™ i7-2720QM (2.20GHz, 6M cache) with Turbo BoostTechnology 2.0 nVidia® NVS™ 4200M 512MB DDR3 Discrete Graphics for Quad Core upon further research, the CPU requires this graphic card. 4.0GB, DDR3-1333MHz SDRAM 500GB 7200rpm Hard Drive I may upgrade to 8GB memory, depending if I am bogged down, what do you guys think?

    Read the article

  • Dedicated server configuration - some tips -Xenserver/Debian

    - by Sanjay S
    I am migrating from a vps based hosting to a dedicated hosting (8GB RAM/1TB HD). I need to run multiple Drupal and Ruby based applications? what would be the recommended configuration. I was thinking of two options. 1) Install multiple Debian os on top of Xen (like VPS). Each may be 2GB Memory and run Drupal and Ruby and MYSQL on separate partitions . 2) Install one instance of Debian. and Install Drupal (Apache, php) Ruby (lighttpd, ruby) ,MySQL all in the same partition I was little worried that option 2 could lead to some performance issues later..

    Read the article

  • I'm confuse about these 2 statements about performance of 32 bit application on 64 bit Windows 7....

    - by metal gear solid
    Running some 32 bit applications on a 64 bit OS could actually be slower. The additional overheads in running 32 bit software in 64 bit mode could cause a slight degradation in performance. It will take some time for 64 bit software to become the norm. Source: http://www.w7forums.com/windows-7-64-bit-vs-32-bit-t484.html That depends. If you're working with large files or running applications that consume a great deal of memory, then 64-bit Windows will typically give you a slight performance advantage over 32-bit Windows running on identical hardware. This is true even when using 32-bit applications. Source: http://www.infoworld.com/d/windows/32-bit-windows-7-or-64-bit-windows-7-145?page=0,3 Which is true? If i go for 64 bit Windows 7 then will i feel more performance (Compare to 32 bit windows 7) of 3 years back purchased Adobe photoshop (I think it would be a 32 bit application) and some of other 32 bit applications ?

    Read the article

  • Open source Distributed computing tool

    - by Prasenjit Chatterjee
    I want to set up distributed computing on my Local Area Network consisting a bunch of PCs. Say for the time being each one has the same OS - Windows 7. Is there any opensource tool available so that I can share the resources of these PCs over the LAN and increase the speed of my applications and the memory space. I know that if its a graphics intensive application then, it is not very practical, because the speed of LAN is much slower than Graphics processors. But I only want to share general applications, some basic softwares, Programming language IDEs etc. Can anyone shed some light on it? Thanks in Advance..

    Read the article

  • How do I send traffic from my Mac's wifi to my VPN client?

    - by Heath Borders
    I need to connect my Android to a Juniper VPN. Unfortunately, Juniper doesn't support Android on our VPN version. We've already put in a feature request for it, but we have no idea how long it will take to be complete. Right now, I connect to the Juniper VPN with a Juniper Mac OSX VPN client that uses Java to install kernel extensions to start and stop the VPN. Thus, I can't use the Network panel in System Preferences to create a VPN device, which means it won't show up in the 'Sharing' panel's Internet Sharing Share your connection from: menu, as suggested here. I used newproc.d to see what /usr/libexec/InternetSharing did when it ran, and it runs the following processes: 2013 Nov 1 00:26:54 5565 <1> 64b /usr/libexec/launchdadd 2013 Nov 1 00:26:55 5566 <1> 64b /usr/libexec/InternetSharing 2013 Nov 1 00:26:56 5568 <5566> 64b natpmpd -d -y bridge100 en0 2013 Nov 1 00:26:56 5569 <1> 64b /usr/libexec/pfd -d 2013 Nov 1 00:26:56 5567 <5566> 64b bootpd -d -P My Juniper VPN client creates the following devices (output of ifconfig): jnc0: flags=841<UP,RUNNING,SIMPLEX> mtu 1400 inet 10.61.9.61 netmask 0xffffffff open (pid 920) jnc1: flags=841<UP,RUNNING,SIMPLEX> mtu 1450 closed So, it seems like I should just be able to do this and have everything work: sudo killall -9 natpmpd sudo /usr/libexec/natpmpd -y bridge100 jnc0 My android connected fine and could hit public internet sites, but it couldn't hit private VPN sites. I assume this is because I need to change the routes that /usr/libexec/InternetSharing sets up. This is the output from sudo pfctl -s all before starting Internet Sharing: No ALTQ support in kernel ALTQ related functions disabled TRANSLATION RULES: nat-anchor "com.apple/*" all rdr-anchor "com.apple/*" all FILTER RULES: scrub-anchor "com.apple/*" all fragment reassemble anchor "com.apple/*" all DUMMYNET RULES: dummynet-anchor "com.apple/*" all INFO: Status: Disabled for 0 days 00:11:02 Debug: Urgent State Table Total Rate current entries 0 searches 22875 34.6/s inserts 1558 2.4/s removals 1558 2.4/s Counters match 2005 3.0/s bad-offset 0 0.0/s fragment 0 0.0/s short 0 0.0/s normalize 0 0.0/s memory 0 0.0/s bad-timestamp 0 0.0/s congestion 0 0.0/s ip-option 12 0.0/s proto-cksum 0 0.0/s state-mismatch 1 0.0/s state-insert 0 0.0/s state-limit 0 0.0/s src-limit 0 0.0/s synproxy 0 0.0/s dummynet 0 0.0/s TIMEOUTS: tcp.first 120s tcp.opening 30s tcp.established 86400s tcp.closing 900s tcp.finwait 45s tcp.closed 90s tcp.tsdiff 60s udp.first 60s udp.single 30s udp.multiple 120s icmp.first 20s icmp.error 10s grev1.first 120s grev1.initiating 30s grev1.estblished 1800s esp.first 120s esp.estblished 900s other.first 60s other.single 30s other.multiple 120s frag 30s interval 10s adaptive.start 6000 states adaptive.end 12000 states src.track 0s LIMITS: states hard limit 10000 app-states hard limit 10000 src-nodes hard limit 10000 frags hard limit 5000 tables hard limit 1000 table-entries hard limit 200000 OS FINGERPRINTS: 696 fingerprints loaded This is the output from sudo pfctl -s all after starting Internet Sharing: No ALTQ support in kernel ALTQ related functions disabled TRANSLATION RULES: nat-anchor "com.apple/*" all nat-anchor "com.apple.internet-sharing" all rdr-anchor "com.apple/*" all rdr-anchor "com.apple.internet-sharing" all FILTER RULES: scrub-anchor "com.apple/*" all fragment reassemble scrub-anchor "com.apple.internet-sharing" all fragment reassemble anchor "com.apple/*" all anchor "com.apple.internet-sharing" all DUMMYNET RULES: dummynet-anchor "com.apple/*" all STATES: ALL tcp 10.0.1.32:50593 -> 74.125.225.113:443 SYN_SENT:CLOSED ALL udp 10.0.1.32:61534 -> 10.0.1.1:53 SINGLE:NO_TRAFFIC ALL udp 10.0.1.32:55433 -> 10.0.1.1:53 SINGLE:NO_TRAFFIC ALL udp 10.0.1.32:64041 -> 10.0.1.1:53 SINGLE:NO_TRAFFIC ALL tcp 10.0.1.32:50619 -> 74.125.225.131:443 SYN_SENT:CLOSED INFO: Status: Enabled for 0 days 00:00:01 Debug: Urgent State Table Total Rate current entries 5 searches 22886 22886.0/s inserts 1563 1563.0/s removals 1558 1558.0/s Counters match 2010 2010.0/s bad-offset 0 0.0/s fragment 0 0.0/s short 0 0.0/s normalize 0 0.0/s memory 0 0.0/s bad-timestamp 0 0.0/s congestion 0 0.0/s ip-option 12 12.0/s proto-cksum 0 0.0/s state-mismatch 1 1.0/s state-insert 0 0.0/s state-limit 0 0.0/s src-limit 0 0.0/s synproxy 0 0.0/s dummynet 0 0.0/s TIMEOUTS: tcp.first 120s tcp.opening 30s tcp.established 86400s tcp.closing 900s tcp.finwait 45s tcp.closed 90s tcp.tsdiff 60s udp.first 60s udp.single 30s udp.multiple 120s icmp.first 20s icmp.error 10s grev1.first 120s grev1.initiating 30s grev1.estblished 1800s esp.first 120s esp.estblished 900s other.first 60s other.single 30s other.multiple 120s frag 30s interval 10s adaptive.start 6000 states adaptive.end 12000 states src.track 0s LIMITS: states hard limit 10000 app-states hard limit 10000 src-nodes hard limit 10000 frags hard limit 5000 tables hard limit 1000 table-entries hard limit 200000 TABLES: OS FINGERPRINTS: 696 fingerprints loaded It looks like I need to change the pf settings that /usr/libexec/InternetSharing set up, but I have no idea how to do that.

    Read the article

  • Windows 2003 Enterprise Server becomes unresponsive occasionally

    - by Derek Ivey
    We're experiencing issues with our Windows 2003 server, which runs SQL Server 2005 SP1. We notice that sometimes the entire server becomes unresponsive and I captured a screenshot of the task manager when this happened. I noticed that the processes are not displayed during this time and all of the memory information and handles disappear (as shown in the screenshot). Does anyone have any ideas as to what could be wrong with this sytem? I'm planning to take it down over the weekend to run Memtest86. Screenshot: http://dl.dropbox.com/u/2058/windows_screenshot.png The issue is resolved by a reboot, but I'd like to figure out the cause of this and get it fixed. I also tried to run a ping when this occurred and I got the following error in the event log: "Application popup: ping.exe - Application Error: The application failed to initialize properly (0xc0000142). Click on OK to terminate the application." Thanks, Derek

    Read the article

  • Black Screen when Computer Boots

    - by BlueRaja
    I'm having a serious problem with my computer; I think I've narrowed it down to the motherboard, but I'd like a second opinion before I spend the money. Before I moved into my new apartment, my desktop was working fine; now, it just won't work. It will turn on, the fans will spin up, lights come on... but nothing appears on the screen. No POST, nothing. I've tried: A different monitor (both are VGA) A different video-card (both are DVI, PCIe) Three different, known-good VGA-DVI adapters The onboard video port (VGA) Reseating the memory, and trying only one stick Different, known-good wall-outlets Unplugging the HDD and CD-drive from both the motherboard and PSU Replacing the PSU Has anyone had this happen before? Perhaps it's a known problem with this motherboard? Any advice!? Here are my specs: A13G+ V3.0 motherboard 2 2-gig 800mhz DDR2 600-watt PSU two older Geforce video cards

    Read the article

< Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449  | Next Page >