Search Results

Search found 29284 results on 1172 pages for 'weblogic 10 x'.

Page 443/1172 | < Previous Page | 439 440 441 442 443 444 445 446 447 448 449 450  | Next Page >

• Terratec Cinergy Hybrid T USB XS is not recognized anymore on Mac OS X

  - by Gabble

  I have used Terratec Cinergy Hybrid T USB XS for years now, alongside with Elgato EyeTV software. I am a happy and completely satisfied user! Since a couple of weeks the USB sitck stopped working on my MacPro1,1 (OS version 10.6.3): EyeTV does not see any device attached, and actually, the green led on the stick stays off. It is not a USB port fault: I have unplugged any other USB/Firewire device and tried with different USB ports, to no avail (any other USB devices work as expected on any port) I have completely uninstalled EyeTV software, including preferences and system daemons/extensions, rebooted and reinstalled the latest EyeTV. No way. Reset the PRAM. Nope. Checked the Apple System Profiler - USB: No device attached, The MacPro does not see it at all. I need to say that: a) The device worked as a charm even with the latest OS 10.6.x (so it's not a OS upgrade cause). b) I have plugged the Terratec Cinergy Hybrid T USB XS to my MacBook5,1 where EyeTV is not installed and was never installed: The green led on the stick turns on, the growl bubble pops up, and the device is perfectly recognized by the system. Apple System Profiler says (sorry, Italian language): Cinergy Hybrid T USB XS (2882): ID prodotto: 0x005e ID fornitore: 0x0ccd Versione: 1.10 Numero di serie: 061102005755 Velocità: Fino a 12 Mb/sec Produttore: TerraTec Electronic GmbH ID posizione: 0x04100000 Corrente disponibile (mA): 500 Corrente necessaria (mA): 500 At this point I am pretty sure the Terratec stick is not damaged and there is something wrong with my MacPro. I kindly ask you: Is there a way to force my MacPro recognize the USB device? What can I check? Is there something that caches USB connection that can be reset? A OS reinstall would be the very last resort for me. Thanks in advance for any help you will offer!

  Read the article

• Windows Server wbadmin recover with commas

  - by dlp

  I want to do a recovery of files with commas in their names from the command line, ala: wbadmin start recovery -version:10/01/2013-12:00 -itemType:File -overwite:Overwrite -quiet "-Items:C:\Path\To\File, With Comma.txt,C:\Path\To\File 2, With Comma.txt" So there are two files: C:\Path\To\File, With Comma.txt C:\Path\To\File 2, With Comma.txt The problem is wbadmin assumes commas separates each file, so it sees 4 files specified instead of 2. I've tried putting a \ in front of commas that are part of the file names like so: wbadmin start recovery -version:10/01/2013-12:00 -itemType:File -overwite:Overwrite -quiet "-Items:C:\Path\To\File\, With Comma.txt,C:\Path\To\File 2\, With Comma.txt" but it doesn't work, it just says there's a syntax error. The documentation on Technet doesn't seem to mention anything that'll help either. OS is Windows Server 2008 R2. A clarifying comment: I've changed the file names to be different than the actual names to be less revealing, but I also see I dumbed it down too much. The comma can occur either in the file name itself like C:\Path\To\File, With Comma.txt' or in the path to the file, like:C:\Path, To\Other\File.txt`.

  Read the article

• Quickly close all Word and Excel instances?

  - by dyenatha

  Suppose I open 10 Word files and 10 Excel files and make no changes, how do I quickly taskkill all at once? Because I must repeat several attempts to replicate race, I'm hoping for a command-line solution. I'm willing to try PowerShell and cygwin (1.5) if necessary. The OS is Windows XP SP3 with current patches (still IE7). I tried "taskkill /pid 1 /pid 2 /t" where 1 is PID of EXCEL.EXE and 2 is PID of WINWORD.EXE, but it closed only 1 window of each program. I'm trying to replicate a race where an add-in for Microsoft Office 2007 fails to exclusive-lock one of its own files, which caused the 2nd Office program to stop exiting with a warning: System.IO.IOException: The process cannot access the file 'C:\Documents and Settings\me\Application Data\ExpensiveProduct\Add-InForMicrosoftOffice\4.2\egcred' because it is being used by another process. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy) at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options) at System.IO.StreamWriter.CreateFile(String path, Boolean append) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding) at System.IO.File.WriteAllText(String path, String contents, Encoding encoding) at ExpensiveProduct.EG.DataAccess.Credentials.CredentialManager.SaveUserTable() at ExpensiveProduct.OfficeAddin.OfficeAddinBase.Dispose(Boolean disposing) at ExpensiveProduct.OfficeAddin.WordAddin.Dispose(Boolean disposing) at ExpensiveProduct.OfficeAddin.OfficeAddinBase.OnHostShutdown() at ExpensiveProduct.OfficeAddin.OfficeAddinBase.Unload(ext_DisconnectMode mode)

  Read the article

• Unrelated Files Corrupted on System Restore

  - by Yar

  I restored OSX 10.6.2 today (was 10.6.3 and not booting) by copying the system over from a backup. The data directories were not touched. In the data directories, I'm seeing some files as 0 bytes, and getting permission-denied errors when copying, even when using sudo cp or the Finder itself. Some programs, differently, take the files at face value and see no permission problems (such as zip), but they see the files as zero bytes, which would be game-over for recovery. cp: .git/objects/fe/86b676974a44aa7f128a55bf27670f4a1073ca: could not copy extended attributes to /eraseme/blah/.git/objects/fe/86b676974a44aa7f128a55bf27670f4a1073ca: Operation not permitted I have tried sudo chown, sudo chmod -R 777 and sudo chflags -R nouchg which do not change the end result. Strangely, this is only affecting my .git directories (perhaps because they start with a period, but renaming them -- which works -- does not change anything). What else can I do to take ownership of these files? Edit: This question comes from StackOverflow because I originally thought it was a GIT problem. It's definitely not (just) GIT. Anyway, this is to help put some of the comments in context.

  Read the article

• How to show what will be updated next pull?

  - by ???

  In SVN, doing svn update will show a list of full paths with a status prefix: $ svn update M foo/bar U another/bar Revision 123 I need to get this update list to do some post-process work. After I have transferred the SVN repository to Git, I can't find a way to get the update list: $ git pull Updating 9607ca4..61584c3 Fast-forward .gitignore | 1 + uni/.gitignore | 1 + uni/package/cooldeb/.gitignore | 1 + uni/package/cooldeb/Makefile.am | 2 +- uni/package/cooldeb/VERSION.av | 10 +- uni/package/cooldeb/cideb | 10 +- uni/package/cooldeb/cooldeb.sh | 2 +- uni/package/cooldeb/newdeb | 53 +++- ...update-and-deb-redist => update-and-deb-redist} | 5 +- uni/utils/2tree/{list2tree => 2tree} | 12 +- uni/utils/2tree/ChangeLog | 4 +- uni/utils/2tree/Makefile.am | 2 +- I can translate the Git pull status list to SVN's format: M .gitignore M uni/.gitignore M uni/package/cooldeb/.gitignore M uni/package/cooldeb/Makefile.am M uni/package/cooldeb/VERSION.av M uni/package/cooldeb/cideb M uni/package/cooldeb/cooldeb.sh M uni/package/cooldeb/newdeb M ...update-and-deb-redist => update-and-deb-redist} M uni/utils/2tree/{list2tree => 2tree} M uni/utils/2tree/ChangeLog M uni/utils/2tree/Makefile.am However, some entries having long path names are abbreviated, such as uni/package/cooldeb/update-and-deb-redist is abbreviated to ...update-and-deb-redist. I deem I can do with Git directly, maybe I can configure git pull's output in special format. Any idea?

  Read the article

• How do I change the default ftp folder in MacOS X 10.6?

  - by Wild_Eep

  I'm running WordPress 2.9.1 from a Mac running 10.6.3. WordPress is installed to the /Library/WebServer/Documents folder. WordPress has a feature called AutoUpdate. Clicking an autoupdate button will download and install updated versions of the WordPress software, or third-party plugin tools. It's a convenient way to keep things up to date. WordPress uses FTP to download the files. I've enabled FTP and set up a user account and opened the requisite ports in my firewall for FTP traffic. This doesn't seem to be enough for my self-hosted installation, though. I'm sure this feature was originally designed for someone who has access to a remote shared webserver, and that it's merely a configuration challenge related to the FTP setup. I feel that if I can adjust the initial directory that the FTP service presents to the AutoUpdate feature, everything else will work properly. So, my question is, how do I adjust what folder is presented when a given user connects to a Mac running 10.6.3 via FTP?

  Read the article

• Basic IPTables setup for OpenVPN/HTTP/HTTPS server

  - by Afronautica

  I'm trying to get a basic IPTables setup on my server which will allow HTTP/SSH access, as well as enable the use of the server as an OpenVPN tunnel. The following is my current rule setup - the problem is OpenVPN queries (port 1194) seemed to be getting dropped as a result of this ruleset. Pinging a website while logged into the VPN results in teh response: Request timeout for icmp_seq 1 92 bytes from 10.8.0.1: Destination Port Unreachable When I clear the IPTable rules pinging from the VPN works fine. Any ideas? iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE iptables -A INPUT -p tcp --dport 1194 -j ACCEPT iptables -A FORWARD -p tcp --dport 1194 -j ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -i ! lo -d 127.0.0.0/8 -j REJECT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A OUTPUT -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT iptables -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT iptables -A INPUT -j REJECT iptables -A FORWARD -j REJECT

  Read the article

• AA doesn't work due to monitor?

  - by MikeQ

  I have a monitor (with TV tuner - Philips 221T1SB), native resolution of 1920x1080, but there is an Overscan in Catalyst. It says from left to right '10%' and '0%', if i set it (all the way to the left) on 10%, i get screen with black borders (you know what i mean), but if i set it to 0%, i get a filled monitor. It does make sense, but why the hell is there such an option? I never had any AA issues before, but now, with this monitor, here they go. I can't find any solution, i have only one lead = overscan, or pretty much anything with the CCC settings. Yes, i almost forgot. After a bit of trying to configure the monitor with remote, i found there is a PC channel option, few other channels, and then a HDMI option. I have monitor through HDMI, but why i get black screen when i select the PC channel? That might be another problem. I tried almost everything. Please guys, give me a hand. I don't want jaggies! CPU: Intel I5-750 @4,0GHz RAM: Corsair Vengeance 8GB 1600MHz GPU: AMD Gigabyte HD 7950 Windforce @1100/1400, 1,174V Motherboard: ASUS P7P55D-E EVO

  Read the article

• Why is my rsync so slow?

  - by iblue

  My Laptop and my workstation are both connected to a Gigabit Switch. Both are running Linux. But when I copy files with rsync, it performs badly. I get about 22 MB/s. Shouldn't I theoretically get about 125 MB/s? What is the limiting factor here? EDIT: I conducted some experiments. Write performance on the laptop The laptop has a xfs filesystem with full disk encryption. It uses aes-cbc-essiv:sha256 cipher mode with 256 bits key length. Disk write performance is 58.8 MB/s. iblue@nerdpol:~$ LANG=C dd if=/dev/zero of=test.img bs=1M count=1024 1073741824 Bytes (1.1 GB) copied, 18.2735 s, 58.8 MB/s Read performance on the workstation The files I copied are on a software RAID-5 over 5 HDDs. On top of the raid is a lvm. The volume itself is encrypted with the same cipher. The workstation has a FX-8150 cpu that has a native AES-NI instruction set which speeds up encryption. Disk read performance is 256 MB/s (cache was cold). iblue@raven:/mnt/bytemachine/imgs$ dd if=backup-1333796266.tar.bz2 of=/dev/null bs=1M 10213172008 bytes (10 GB) copied, 39.8882 s, 256 MB/s Network performance I ran iperf between the two clients. Network performance is 939 Mbit/s iblue@raven $ iperf -c 94.135.XXX ------------------------------------------------------------ Client connecting to 94.135.XXX, TCP port 5001 TCP window size: 23.2 KByte (default) ------------------------------------------------------------ [ 3] local 94.135.XXX port 59385 connected with 94.135.YYY port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.09 GBytes 939 Mbits/sec

  Read the article

• On Ubuntu get: "-bash: ./flume No such file or directory" BUT flume is there and executable. Same binary OK on RHEL

  - by lcbrevard

  This is already posted in serverfault - and may be more apprpriate there. Reworked a bit from the orginal posting. We have a product built on CentOS 4 32-bit Linux that runs unmodified on 32- and 64-bit CentOS/RHEL 4 and 5 and SLES 10. It also runs unmodified on SLES 9 64-bit. [SLES 9 32-bit requires a different libstdc++.] The name of the main binary executable is 'flume' Yesterday we tried to put this on 64-bit Ubuntu 10 and, even though the file is there and the right size, we get: -bash: ./flume: No such file or directory 'file flume' shows it to be a 32-bit ELF (can't remember the exact output and the system is on an isolated network) If put into /usr/local/bin, then 'which flume' returns: /usr/local/bin/flume The file is marked as executable (did 'chmod +x flume') and lsattr shows no problems with attribute bits. I was not able to try 'ldd flume' yet. I have also not tried 'strace flume'. Currently I am with an air conditioning failure. [It's been that kind of week!] I now suspect that some library is not there. This is a profoundly unhelpful message and one I have never seen before. Is this peculiar to Ubuntu or perhaps just to this installation. We gave up and moved to a RHEL 4 system and everything is fine. But I sure would like to know what causes this.

  Read the article

• How do you enable webcam support in Facebook for Ubuntu 10.04?

  - by Jonathan

  I think I have finally arrived at an insolvable equation: Chromium v.7 + Ubuntu 10.04 + Sun Java 6 + Webcam + Facebook + Flash 10 = non-functional All of those items listed above are potential points of failure in this situation, and any help narrowing them down would be fantastic. I am simply trying to enable webcame support directly through Facebooks website. Forum searches and the usual googling turn up few posts related to this specific equation. Two of the major suggestions include: 1) Installing the Sun (I refuse to say oracle sob)-provided Java implementation instead of the OpenJDK normally installed in Ubuntu. And yes, after installing it, I did update all my default supports to use the sun commands over the openjdk. 2) Somehow enabling Facebook as a permitted site to access my webcam using Flash settings. I have not been able to explore option 2 because I cannot find a way to adjust the Flash settings in chromium 7. Other factors that do not help include the fact that I am pretty sure facebook changes its webcam interface every 10 seconds just to keep troubleshooters and support personnel on their toes. If anyone has a OTP that informs us of the next shift in the app, a leak would be greatly appreciated!

  Read the article

• Computer making strange sound when turned on, ever since power outage

  - by Dot NET

  Recently we experienced a power outage, and the PC was off. However, once the power came back, I switched on the PC and heard a strange noise - almost as if the hard disk or fans were struggling to work. I can't really describe the sound, but it's a laboured, loud sound almost like a jack-hammer. This has been persisting ever since the power outage, however the noise stops after around 10 minutes or so, and doesn't start again until the computer is turned off and on again. At first I thought it had something to do with the HDD, but all my files are intact, chkdsk did not report any issues and performance is 100% unchanged, even in games (so the gfx card is fine, and so is the HDD most likely). My PC setup basically has around 3 cooling fans, but I'm not sure if it's one of these either as the noise actually stops after 10 minutes or so, and if I leave the PC on for 4 hours (for example) the noise never starts again. It's there solely when turning on the PC. I haven't got a UPS, and it's important to note that the computer was not on when the power went out - it was merely plugged in. I then promptly unplugged the PC once the power was out, and only plugged it in again when the power came back. Could it be the power supply? Unfortunately I can't open my tower as I would void the warranty. Are there any tests which I could carry out without voiding the warranty?

  Read the article

• How do you enable webcam support in facebook for ubuntu 10.04?

  - by Jonathan

  I think I have finally arrived at an insolvable equation: Chromium v.7 + Ubuntu 10.04 + Sun Java 6 + Webcam + Facebook + Flash 10 = non-functional All of those items listed above are potential points of failure in this situation, and any help narrowing them down would be fantastic. I am simply trying to enable webcame support directly through Facebooks website. Forum searches and the usual googling turn up few posts related to this specific equation. Two of the major suggestions include: 1) Installing the Sun (I refuse to say oracle sob)-provided Java implementation instead of the OpenJDK normally installed in ubuntu. And yes, after installing it, I did update all my default supports to use the sun commands over the openjdk. 2) Somehow enabling Facebook as a permitted site to access my webcam using Flash settings. I have not been able to explore option 2 because I cannot find a way to adjust the Flash settings in chromium 7. Other factors that do not help include the fact that I am pretty sure facebook changes its webcam interface every 10 seconds just to keep troubleshooters and support personnel on their toes. If anyone has a OTP that informs us of the next shift in the app, a leak would be greatly appreciated! Cheers!

  Read the article

• How large is the performance loss for a 64-bit VirtualBox guest running on a 32-bit host?

  - by IllvilJa

  I have a 64-bit Virtualbox guest running Gentoo Linux (amd64) and it is currently hosted on a 32-bit Gentoo laptop. I've noticed that the performance of the VM is very slow compared to the performance of the 32-bit host itself. Also when I compare with another 32-bit Linux VM running on the same host, performance is significantly less on the 64-bit VM. I know that running a 64-bit VM on a 32-bit host does incur some performance penalties for the VM, but does anyone have any deeper knowledge of how large a penalty one might expect in this scenario, roughly speaking? Is a 10% slowdown something to expect, or should it be a slowdown in the 90% range (running at 1/10 the normal speed)? Or to phrase it in another way: would it be reasonable to expect that the performance improvement for the 64-bit VM increases so much that it is worth reinstalling the host machine to run 64-bit Gentoo instead? I'm currently seriously considering that upgrade, but am curious about other peoples experience of the current scenario. I am aware that the host OS will require more RAM when running in 64-bit, but that's OK for me. Also, I do know that one usually don't run a 64-bit VM on a 32-bit server (I'm surprised I even got the VM started in the first place) but things turned out that way when I tried to future proof the VM I was setting up and decided to make it 64-bit anyway.

  Read the article

• Cloning a git repository from a machine running OS X

  - by Mike

  Hi folks, I'm trying to host a git repository from my home OS X machine, and I'm stuck on the last step of cloning the repository from a remote system. Here's what I've done so far: On the OS X (10.6.6) machine (heretofore dubbed the "server") I created a new admin user Logged into the new user's account Installed git Created an empty git repository via "git init" Turned on remote login Set port mapping on my router (airport extreme) to send ssh traffic to the server Added a ".ssh" directory to the user's home directory From the remote machine (also an OS X 10.6.6 machine), I sent that machine's public key to the server using scp and the login credentials of the user created in step 1 To test that the server would use the remote machine's public key, I ssh'd to the server using the username of the user created in step 1 and indeed was able to connect successfully without being asked for a password I installed git on the remote machine From the remote machine I attempted to "git clone ssh://[email protected]:myrepo" (where "user", "my.server.address", and "myrepo" are all replaced by the actual username, server address and repo folder name, respectively) However, every time I try the command in step 11, I get asked to confirm the server's RSA fingerprint, then I'm asked for a password, but the password for the user I set up for that machine never works. Any advice on how to make this work would be greatly appreciated!

  Read the article

• Windows Server 2003 IPSec Tunnel Connected, But Not Working (Possibly NAT/RRAS Related)

  - by Kevinoid

  Configuration I have setup a "raw" IPSec tunnel between a Windows Server 2003 (SBS) machine and a Netgear FVG318 according to the instructions in Microsoft KB816514. The configuration is as follows (using the same conventions as the article): NetA | SBS2003 | FVG318 | NetB 10.0.0.0/24 | 216.x.x.x | 69.y.y.y | 10.0.254.0/24 Both the Main Mode and Quick Mode Security Associations are successfully completed and appear in the IP Security Monitor. I am also able to ping the SBS2003 server on its private address from any computer on NetB. The Problem Any traffic sent from a computer on NetA to NetB, or from SBS2003 to NetB (excluding ICMP Ping responses), is sent out on the public network interface outside the IPSec tunnel (no encryption or header authentication, as if the tunnel were not there). Pings sent from a computer on NetB to a computer on NetA successfully reach computers on NetA, but the responses are silently discarded by SBS2003 (they do not go out in the clear and do not generate any encrypted traffic). Possible Solutions Incorrect Configuration I could have mistyped something, somewhere, or KB816514 could be incorrect in some way. I have tried very hard to eliminate the first option. Have re-created the configuration several times, tried tweaking and adjusting all the settings I could without success (most prevent the SA from being established). NAT/RRAS I have seen multiple posts elsewhere suggesting that this could be due to interaction between NAT and the IPSec filters. Possibly the NetA private addresses get rewritten to 216.x.x.x before being compared with the Quick Mode IPSec filters and don't get tunneled because of the mismatch. In fact, The Cable Guy article from June 2005 "TCP/IP Packet Processing Paths" suggests that this is the case, (see step 2 and 4 of the Transit Traffic path). If this is the case, is there a way to exclude NetA-NetB traffic from NAT? Any thoughts, ideas, suggestions, and/or comments are appreciated.

  Read the article

• Windows 7 breaks even in safe mode

  - by delenda

  Hi, I have a Dell XPS M1730 with Windows 7 installed. I noticed last night that after a few hours of use, the fans kicked into full and I couldn't do anything without it taking forever. Minimising windows, opening device manager or even opening process explorer took minutes and a game install I had just started took nearly 4 hours to complete. When procexp finally loaded, the refresh was so slow that it was mostly useless. From what I could gather, it was reporting 60% idle processes with procexp using nearly 40%. There were no hardware interrupts listed. When I rebooted, the problem went away for about 10 minutes and then the same thing happened. The issue persists in safe mode and even after I removed the graphics drivers, which have been an issue in the past, it still happens. Icons flash quite quickly on the desktop periodically and screen refresh is painfully slow. When booting now, the fans kick in to full as soon as the windows logon box comes up and it's taking 10 minutes to bring the desktop up. Chkdsk reports nothing and the raid check says that everything is fine. I'm thinking hardware failure, probably HDD but wanted some other opinions. I'm planning to try a linux live cd to see if it works without using the hard disks. If anyone has any input, it would be greatly appreciated. Delenda

  Read the article

• Windows 7 Laptop Randomly Sleeping

  - by Josh Arenberg

  I'm running Windows 7 64-bit on a Lenovo laptop, and I have a problem wherein after I've put it to 'sleep' once, it will seemingly without any reason or warning go back to sleep every 10 to 15 minutes after that. Each time it wakes back up just fine, and you can happily continue on. However, 10 or 15 minutes later, it just drops out into sleep mode. I don't see any errors in the system logs. I don't think it's related to heat ( since it's not rebooting ). When I check the system event log, I can see where the machine goes to sleep, but it simply says "reason: application API", and doesn't indicate which app ( brilliant ). I don't see any errors from hardware or anything relating to sleep in the application log that would point to what is going on either. How can I find out which app is triggering this? EDIT: I confirmed that temperature wasn't the issue. I think it's important to keep in mind that this condition only happens after the first sleep. If I reboot, the problem goes away until I put it to sleep, after which it sleeps on it's own every few minutes. Is there no way to capture which app is calling the sleep routine?

  Read the article

• apache access and error log written in same file

  - by user196075

  i have issue that access and error log are written in same file ! , the configuration in virtualhosts.conf as the following : <VirtualHost *:80> ServerName ************ ServerAdmin support@************8 DocumentRoot /var/www/html/*********.com ErrorLog /var/log/httpd/********/********.com_error_log CustomLog /var/log/httpd/********/********.com_access_log combined <Directory /var/www/html/***********.com> Options -Indexes FollowSymLinks AllowOverride All </Directory> </VirtualHost> as you see from the configuration each access and error logs should be save separately , but both logs are written in *.com_access_log , i have double check all permission , group and owner ... can't find anything wrong previous error in log file : [Thu Sep 19 14:15:02 2013] [error] [client 192.168.10.54] client denied by server configuration: /var/www/html/**********/show_has_offers.php i have tried to generate same error , i can find the hit in access log only as the following : 192.168.10.75 - - [24/Oct/2013:08:11:14 +0000] "GET /show_has_offers.php HTTP/1.1" 404 1586 "-" "Mozilla/5.0 (X11; Linux x86_64; rv:22.0) Gecko/20100101 Firefox/22.0" 0 17332 and nothing in error log !! Please advice ...

  Read the article

• Strategy for Incremental Datasource fetchings in Excel

  - by user1352530

  I am in an scenario with a table that is refresh by a third app every week. I need to keep accumulating all data in Excel, using an ODBC connection to the database. I am wondering Approach 1: Is there a way to force Excel to append results for every update (this update would be triggered according to a parameter that indicates week)? I tried to define the table for which the connection loads using a dynamic reference but once is anchored first time, table position is never redefined Approach 2: Use an ETL to accumulate all weekly results into a staging table and then connect Excel to it in real time. But, I would need a mechanism for caching old data, as I cannot grow exponentially the time Excel opens. Imagine after 10 years, Excel would need to update at opening 10 years fo data before showing it. Is there a way to store already fetched data and increment it at real time (when book is opened) by selecting new data (with a query/filter of something) Thanks EDIT: Maybe it's better to ask it that way: What is the optimal strategy for a table that keeps growing and needs to be read in real time by Excel? I just don't want to fetch absolutely all data after some months...

  Read the article

• Why does my ftp(e)s server fails like half of the time

  - by user1092608

  I have this discussion at work regarding our ftp server running via vsftpd. Initially, we have opted to serve ftpes instead of sftp because this seemed the most flexible and straightforward solution for our server to have secure file transmission. Afterwards, our ftp server seems to be a source of issues for our end users. Half of the time, users complain about not working ftp connections. I must say, i tested our FTP trough different infrastructures (=in the field, at random times at random places) and indeed, sometimes behind some configurations (=no idea how they are configured, because the 'field' testing), i recieve errors. Some of the are: Error: Failed to retrieve directory listing (filezilla) Furthermore, behind my basic home configuration, everything seems to be running fine. I (think I) did all the basic configuration checks (passive mode?, firewall for all ports?, ...) and can't seem to find the source. Being a bunch of techies at our small office, yet knowing nothing about infrastructure, some start suggesting that ftps protocol could be the source of issues. ("No, i only knew sftp so far" "Ftps is not widespread"). I, however, strongly doubt this hypothesis, since reading around on the www, asking questions on serverfault, everyone seems to deny this. So, as I would like to avoid reconfiguring, since this involves messing around in our SSH service, our virtual user setup and ftp service, i would need some advice on 1) what could be potentially the general cause? 2) do you have some general tips? 3) would you mind having a look at my configuration file? ----- General Settings ----- write_enable=YES dirmessage_enable=YES nopriv_user=ftpsecure ftpd_banner="Welcome to XXXX FTP!" hide_ids=YES hide_file=.* max_per_ip=10 max_clients=10 local_enable=YES local_umask=022 chroot_local_user=YES secure_chroot_dir=/usr/share/empty userlist_enable=NO userlist_deny=YES userlist_file=/etc/vsftp_deny_users guest_enable=YES guest_username=ftpvirtual virtual_use_local_privs=YES user_sub_token=$USER local_root=/srv/ftp/ftpvirtual/$USER anonymous_enable=NO syslog_enable=NO xferlog_enable=YES xferlog_file=/var/log/vsftpd_xfer.log connect_from_port_20=YES pam_service_name=vsftpd listen=YES listen_port=21 pasv_enable=YES pasv_min_port=30000 pasv_max_port=30030 pasv_address=foo ssl_enable=YES rsa_cert_file=/etc/vsftpd.pem rsa_private_key_file=/etc/vsftpd.pem force_local_data_ssl=YES force_local_logins_ssl=YES ssl_tlsv1=YES ssl_sslv2=YES ssl_sslv3=YES ssl_ciphers=HIGH anon_mkdir_write_enable=NO anon_root=/srv/ftp anon_upload_enable=NO idle_session_timeout=900 log_ftp_protocol=NO dsa_cert_file=/etc/vsftpd.pem Thanks

  Read the article

• Tuning up a MySQL server

  - by NinjaCat

  I inherited a mysql server, and so I've started with running the MySQLTuner.pl script. I am not a MySQL expert but I can see that there is definitely a mess here. I'm not looking to go after every single thing that needs fixing and tuning, but I do want to grab the major, low hanging fruit. Total Memory on the system is: 512MB. Yes, I know it's low, but it's what we have for the time being. Here's what the script had to say: General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries When making adjustments, make tmp_table_size/max_heap_table_size equal Reduce your SELECT DISTINCT queries without LIMIT clauses Increase table_cache gradually to avoid file descriptor limits Your applications are not closing MySQL connections properly Variables to adjust: query_cache_limit (> 1M, or use smaller result sets) tmp_table_size (> 16M) max_heap_table_size (> 16M) table_cache (> 64) innodb_buffer_pool_size (>= 326M) For the variables that it recommends that I adjust, I don't even see most of them in the mysql.cnf file. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] innodb_buffer_pool_size = 220M innodb_flush_log_at_trx_commit = 2 innodb_file_per_table = 1 innodb_thread_concurrency = 32 skip-locking big-tables max_connections = 50 innodb_lock_wait_timeout = 600 slave_transaction_retries = 10 innodb_table_locks = 0 innodb_additional_mem_pool_size = 20M user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking bind-address = localhost key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 4 myisam-recover = BACKUP query_cache_limit = 1M query_cache_size = 16M log_error = /var/log/mysql/error.log expire_logs_days = 10 max_binlog_size = 100M skip-locking innodb_file_per_table = 1 big-tables [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] [isamchk] key_buffer = 16M !includedir /etc/mysql/conf.d/

  Read the article

• Two network adapters in one WindowsXP PC, how to make them work?

  - by Deele

  I have a need to set up network so I can use two ethernet cards inside one Windows (Windows XP SP2) based PC, one for internet connection, second, for internal LAN. How should I configure each NIC, with what IP's, subnet masks and gateways, so I can use inernet on my PC and get in touch with devices on my LAN? I have found that there are some sort of re routing nessesary inside my PC, but how does it work? I have already set up some configuration already, but I can't use it together with PC #1 NIC #1 connected. I need to disconnect, to access NIC WEB interface. Current configuration: Switch #1 and PC #1 NAS #2 are gigabit one's, so I could access NAS with gigabit speed. PC #1 NIC #1 IP XX.XXX.162.106 SN 255.255.255.248 GW XX.XXX.162.105 PC #1 NIC #2 IP 10.0.0.1 SN 255.255.0.0 GW 0.0.0.0 NAS #1 NIC #1 IP 10.0.0.12 SN 255.255.0.0 GW 0.0.0.0 My question is - what exact configuration should I do for every NIC in this LAN, so it would work? Is it possible to achieve internet access for Laptop, that is inside that NIC #2 LAN (should I just set up basic ICS)?

  Read the article

• How to script GPO in Windows computers without Active Directory?

  - by Peteris Krumins

  Does anyone know how to script GPO for users in a Windows computer that is not on any Active Directory network? I can't use GPMC because it doesn't work without a domain. I have been searching the net for the last couple of hours and all the solutions that I find are related to GPMC. I'd imagine there are some objects in the GPO that are accessible via WMI? Does anyone know anything about that? I was unable to find any information about that. Here is the situation I am trying to script: I have 10 users on the machine, and I want to restrict what they are able to do on the machine. So I created 10 GPOs for each one of them. Now I want to apply a common policy to all of them. The only way to do it is to go through each of the GPO and do it manually. This is too time consuming, therefore I am seeking for a simpler solution. I was unable to find a way to copy GPO from a user to a user. That would make it much easier, I would create a GPO for 1st user, then copy it over to all the other users, but no luck, couldn't find a way to copy GPOs. The other method I tried was creating a GPO for the whole user group but it turns out you can't apply GPO to a group unless you use GPMC, which I can't cause the computer is not on any domain. So I am thinking about scripting this whole process, but again I can't find any examples of how to access particular GPO objects for particular users and modify properties through WMI. Any suggestions on the issue I am having? Thanks!

  Read the article

• Passive mode FTP file download hangs from specific machine

  - by chiptuned

  I have a server which is an AWS instance that just cannot download files from a specific FTP server. I can connect to the FTP server fine and run some commands, but when I request a file it just hangs. Here is the debug output of the base linux ftp client after login: ---> SYST 215 UNIX Type: Apache FtpServer Remote system type is UNIX. ftp> get outgoing/catalog.gz catalog.gz local: catalog.gz remote: outgoing/catalog.gz ---> PASV 227 Entering Passive Mode (64,156,167,125,135,191) ---> RETR outgoing/catalog.gz 150 File status okay; about to open data connection. Thats it. Then it just sits there and nothing transfers. I have verified that a data connection is made but the client gets no data. ? ss -nt dst 64.156.167.125 State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 0 10.185.147.150:41190 64.156.167.125:21 ESTAB 0 0 10.185.147.150:48871 64.156.167.125:48557 The FTP server is not in my control and downloads from other FTP servers in passive mode have worked. Active mode does not work as the system is behind a firewall. Every FTP client I've tried has the same problem. The download works from other systems, even from other AWS instances I have with the same Security Group. Not necessarily the same distro or config though. I understand it may be some issue on the server side, but I want to know what it is about my particular machine where the transfer hangs and where on every other machine I can get my hands on, it works. Please let me know what the culprit on the client side could be or ideas on what else to look at.

  Read the article

< Previous Page | 439 440 441 442 443 444 445 446 447 448 449 450  | Next Page >