Search Results

Search found 12047 results on 482 pages for 'general debugging tidbits'.

Page 444/482 | < Previous Page | 440 441 442 443 444 445 446 447 448 449 450 451  | Next Page >

  • How to stream XML data using XOM?

    - by Jonik
    Say I want to output a huge set of search results, as XML, into a PrintWriter or an OutputStream, using XOM. The resulting XML would look like this: <?xml version="1.0" encoding="UTF-8"?> <resultset> <result> [child elements and data] </result> ... ... [1000s of result elements more] </resultset> Because the resulting XML document could be big (tens or hundreds of megabytes, perhaps), I want to output it in a streaming fashion (instead of creating the whole Document in memory and then writing that). The granularity of outputting one <result> at a time is fine, so I want to generate one <result> after another, and write it into the stream. Assume there's already a method that helps with iterating the results and generating Element objects: public nu.xom.Element getNextResult(); So I'd simply like to do something like this pseudocode (automatic flushing enabled, so don't worry about that) : open stream/writer write declaration write start tag for <resultset> while more results: write next <result> element write end tag for <resultset> close stream/writer I've been looking at Serializer, but the necessary methods, writeStartTag(Element), writeEndTag(Element), write(DocType) are protected, not public! Is there no other way than to subclass Serializer to be able to use those methods, or to manually write the start and end tags directly into the stream as Strings, bypassing XOM altogether? (The latter wouldn't be too bad in this simple example, but in the general case it would get quite ugly.) Am I missing something or is XOM just not made for this? With dom4j I could do this easily using XMLWriter - it has constructors that take a Writer or OutputStream, and methods writeOpen(Element), writeClose(Element), writeDocType(DocumentType) etc. Compare to XOM's Serializer where the only public write method is the one that takes a whole Document. Please refrain from answering if you're not familiar with XOM! I specifically want to know if and how you can do this kind of streaming with that library. (This is related to my question about the best dom4j replacement where XOM is a strong contender.)

    Read the article

  • MVC SiteMap - when different nodes point to same action SiteMap.CurrentNode does not map to the correct route

    - by awrigley
    Setup: I am using ASP.NET MVC 4, with mvcSiteMapProvider to manage my menus. I have a custom menu builder that evaluates whether a node is on the current branch (ie, if the SiteMap.CurrentNode is either the CurrentNode or the CurrentNode is nested under it). The code is included below, but essentially checks the url of each node and compares it with the url of the currentnode, up through the currentnodes "family tree". The CurrentBranch is used by my custom menu builder to add a class that highlights menu items on the CurrentBranch. The Problem: My custom menu works fine, but I have found that the mvcSiteMapProvider does not seem to evaluate the url of the CurrentNode in a consistent manner: When two nodes point to the same action and are distinguished only by a parameter of the action, SiteMap.CurrentNode does not seem to use the correct route (it ignores the distinguishing parameter and defaults to the first route that that maps to the action defined in the node). Example of the Problem: In an app I have Members. A Member has a MemberStatus field that can be "Unprocessed", "Active" or "Inactive". To change the MemberStatus, I have a ProcessMemberController in an Area called Admin. The processing is done using the Process action on the ProcessMemberController. My mvcSiteMap has two nodes that BOTH map to the Process action. The only difference between them is the alternate parameter (such are my client's domain semantics), that in one case has a value of "Processed" and in the other "Unprocessed": Nodes: <mvcSiteMapNode title="Process" area="Admin" controller="ProcessMembers" action="Process" alternate="Unprocessed" /> <mvcSiteMapNode title="Change Status" area="Admin" controller="ProcessMembers" action="Process" alternate="Processed" /> Routes: The corresponding routes to these two nodes are (again, the only thing that distinguishes them is the value of the alternate parameter): context.MapRoute( "Process_New_Members", "Admin/Unprocessed/Process/{MemberId}", new { controller = "ProcessMembers", action = "Process", alternate="Unprocessed", MemberId = UrlParameter.Optional } ); context.MapRoute( "Change_Status_Old_Members", "Admin/Members/Status/Change/{MemberId}", new { controller = "ProcessMembers", action = "Process", alternate="Processed", MemberId = UrlParameter.Optional } ); What works: The Html.ActionLink helper uses the routes and produces the urls I expect: @Html.ActionLink("Process", MVC.Admin.ProcessMembers.Process(item.MemberId, "Unprocessed") // Output (alternate="Unprocessed" and item.MemberId = 12): Admin/Unprocessed/Process/12 @Html.ActionLink("Status", MVC.Admin.ProcessMembers.Process(item.MemberId, "Processed") // Output (alternate="Processed" and item.MemberId = 23): Admin/Members/Status/Change/23 In both cases the output is correct and as I expect. What doesn't work: Let's say my request involves the second option, ie, /Admin/Members/Status/Change/47, corresponding to alternate = "Processed" and a MemberId of 47. Debugging my static CurrentBranch property (see below), I find that SiteMap.CurrentNode shows: PreviousSibling: null Provider: {MvcSiteMapProvider.DefaultSiteMapProvider} ReadOnly: false ResourceKey: "" Roles: Count = 0 RootNode: {Home} Title: "Process" Url: "/Admin/Unprocessed/Process/47" Ie, for a request url of /Admin/Members/Status/Change/47, SiteMap.CurrentNode.Url evaluates to /Admin/Unprocessed/Process/47. Ie, it is ignorning the alternate parameter and using the wrong route. CurrentBranch Static Property: /// <summary> /// ReadOnly. Gets the Branch of the Site Map that holds the SiteMap.CurrentNode /// </summary> public static List<SiteMapNode> CurrentBranch { get { List<SiteMapNode> currentBranch = null; if (currentBranch == null) { SiteMapNode cn = SiteMap.CurrentNode; SiteMapNode n = cn; List<SiteMapNode> ln = new List<SiteMapNode>(); if (cn != null) { while (n != null && n.Url != SiteMap.RootNode.Url) { // I don't need to check for n.ParentNode == null // because cn != null && n != SiteMap.RootNode ln.Add(n); n = n.ParentNode; } // the while loop excludes the root node, so add it here // I could add n, that should now be equal to SiteMap.RootNode, but this is clearer ln.Add(SiteMap.RootNode); // The nodes were added in reverse order, from the CurrentNode up, so reverse them. ln.Reverse(); } currentBranch = ln; } return currentBranch; } } The Question: What am I doing wrong? The routes are interpreted by Html.ActionLlink as I expect, but are not evaluated by SiteMap.CurrentNode as I expect. In other words, in evaluating my routes, SiteMap.CurrentNode ignores the distinguishing alternate parameter.

    Read the article

  • Using JavaScript to parse an XML file

    - by Chris Clouten
    I am new to Stack OverFlow and coding in general. I am trying to take an XML file and render it in the browser using JavaScript. I have looked around at some sample code of how to do this and came up with the following code: <!DOCTYPE html> <html> <body> <script> if (window.XMLHttpRequest) {// code for IE7+, Firefox, Chrome, Opera, Safari xmlhttp=new XMLHttpRequest(); } else {// code for IE6, IE5 xmlhttp=new ActiveXObject("Microsoft.XMLHTTP"); } xmlhttp.open("GET","social.xml",false); xmlhttp.send(); xmlDoc=xmlhttp.responseXML; document.write("<table border='1'>"); var x=xmlDoc.getElementsByTagName("CD"); for (i=0;i<x.length;i++) { document.write("<tr><td>"); document.write(x[i].getElementsByTagName("c_id")[0].childNodes[0].nodeValue); document.write("</td><td>"); document.write(x[i].getElementsByTagName("facebook_id")[0].childNodes[0].nodeValue); document.write("</td></tr>"); } document.write("</table>"); </script> </body> </html> Anyway, when I run this on my local server none of the data that I am trying to display in the table appears. My .html file and .xml file are in the same folder, so I believe I have the correct file pathway. I could just be making a rookie mistake here, but I can't for the life of me figure out why a table listing the c_id and facebook_id values is not being created. I looked around for answers and haven't been able to find any. Any help would be greatly appreciated. Thanks!

    Read the article

  • Zaypay alternatives for payments using call or sms

    - by JohannesH
    We are currently trying to implement a payment provider in zaypay for paying for services using sms or by calling a number. We already have google checkout and paypal working for regular payments but zaypay is rather inflexible, poorly documented and a pain to setup when you have hundreds of products with varying prices. So my question is, do you know of any other european payment providers that take sms and call payments? As a response to Roberts answer/question Hi Robert, I must say that the Zaypay solution is the best and only I've seen thus far regarding phoned payments. However, since its now 2 months ago I finished the implementation of our custom Zaypay UI I can't remember much of the the details of the problems we were having. I'll try to give a brief of them anyways the best I can. First of all I would like to see a redirection type scenario for payalogues. From what I remember you guys are using the JS framework "Prototype" which doesn't play nice with jQuery which we are using so we weren't able to use the popup-type scenario supported by payalogues. Furthermore when implementing our custom interface I remember a lot of missing translations, like words that were codes instead of a word or a phrase. This meant we ended up writing/translating all the messages we needed ourselves. Also, another point of annoyance was the setup of prices and items. I wish we could just send in the order items/prices as a part of the interface like you can in Google Checkout or PayPal (not that they're flawless either), instead of having to define ALL the items you will ever sell through your admin interface beforehand. As far as I can remember it is virtually impossible to use Zaypay for a multi-item order in its current form. Finally there are, as far as I can tell, some security issues that you have to think about when you implement a custom solution... especially a ajax driven one. As I said in my original post you do mention this in the documentation but I believe the documentation wasn't that comprehensive regarding security issues. Again I wish I could give more details but the code & client is long since gone, so I can't look up the comments I wrote. Sorry! Oh yeah, the general API documentation weren't exactly comprehensive and 100% correct either. Again, I don't want to advice people against using Zaypay, I just want to advice that they should try it out first on a realistic prototype and think about their implementation before releasing to production. Maybe its just me who misunderstood a lot of things but I generally had a difficult time using your framework and I was left with a feeling that the API was very new and not thought through from the beginning.

    Read the article

  • [NSIS] Custom radio-buttom INI page via Eclipse

    - by Omegazero
    I'm using Eclipse's create InstallOptions menu to create a custom INI page with radio-buttons for repackaging the Blackberry Desktop installer. There are 2 sections for each type: "Internet" and "Enterprise". I need a user to select 1 of the 2 options and depending on their selection, the page will carry over the selection chosen in the custom page, jump to the INSTFILES page, and continue onto the end. I couldn't find any concrete documentation on getting INI pages to load in the script (I'm probably searching incorrectly), and then pass data from one page to the next (according to fields I guess?) Any help is appreciated. Even if it's to tell me I'm blind and can't read a doc (though a link would help :) ) Here's the INI code: ; Auto-generated by EclipseNSIS InstallOptions Script Wizard ; Jul 29, 2009 5:42:56 PM [Settings] NumFields=7 Title=RIM BlackBerry Desktop 5.0 installation CancelEnabled=1 [Field 1] Type=RadioButton Left=15 Top=28 Right=100 Bottom=38 Text=Internet State= Flags=NOTIFY [Field 4] Type=RadioButton Left=15 Top=95 Right=100 Bottom=105 Text=Enterprise Flags=NOTIFY [Field 2] Type=GroupBox Left=0 Top=10 Right=300 Bottom=75 Text= [Field 5] Type=Label Left=30 Top=42 Right=235 Bottom=52 Text=For users who are NOT on the Enterprise (Exchange) server [Field 6] Type=Label Left=30 Top=111 Right=235 Bottom=121 Text=Choose this only if you are on the Exchange server [Field 3] Type=GroupBox Left=0 Top=75 Right=300 Bottom=140 [Field 7] Type=Label Left=0 Top=0 Right=130 Bottom=10 Text=Please choose your installation method ...And here's the NSI code: Auto-generated by EclipseNSIS Script Wizard Jul 29, 2009 5:42:16 PM Name "BlackBerry Desktop" RequestExecutionLevel admin General Symbol Definitions !define VERSION 5.0.0.11 !define COMPANY RIM !define URL http://www.blackberry.com MUI Symbol Definitions !define MUI_ICON BBD.ico !define MUI_LICENSEPAGE_RADIOBUTTONS Included files !include Sections.nsh !include MUI2.nsh Reserved Files ReserveFile "${NSISDIR}\Plugins\AdvSplash.dll" Installer pages !insertmacro MUI_PAGE_WELCOME !insertmacro MUI_PAGE_LICENSE license.txt !insertmacro MUI_PAGE_COMPONENTS !insertmacro MUI_PAGE_INSTFILES !insertmacro MUI_PAGE_FINISH Installer languages !insertmacro MUI_LANGUAGE English Installer attributes OutFile RIM_BlackBerry_Desktop_5.0.exe InstallDir "$TEMP\RIM BlackBerry Desktop 5.0 Setup Files" CRCCheck on XPStyle on ShowInstDetails hide VIProductVersion 5.0.0.11 VIAddVersionKey /LANG=${LANG_ENGLISH} ProductName "BlackBerry Desktop" VIAddVersionKey /LANG=${LANG_ENGLISH} ProductVersion "${VERSION}" VIAddVersionKey /LANG=${LANG_ENGLISH} CompanyName "${COMPANY}" VIAddVersionKey /LANG=${LANG_ENGLISH} CompanyWebsite "${URL}" VIAddVersionKey /LANG=${LANG_ENGLISH} FileVersion "${VERSION}" VIAddVersionKey /LANG=${LANG_ENGLISH} FileDescription "" VIAddVersionKey /LANG=${LANG_ENGLISH} LegalCopyright "" Installer sections Section /o Main SEC0000 SetOutPath $INSTDIR SetOverwrite ifdiff ; TESTING PHASE SectionEnd SectionGroup /e "BlackBerry Desktop Section" Section /o Internet SEC0001 SetOutPath $INSTDIR\DRIVERS SetOverwrite ifdiff ; Execwait 'msiexec /i "$INSTDIR\BlackBerry USB and Modem Drivers_ENG (DM5.0b28).msi" /passive' SetOutPath $INSTDIR SetOverwrite ifdiff ; File /r * ; ExecWait '"$INSTDIR\Setup.exe" /S/v/qb!' SectionEnd Section /o Enterprise SEC0002 SetOutPath $INSTDIR\DRIVERS SetOverwrite ifdiff ; Execwait 'msiexec /i "$INSTDIR\BlackBerry USB and Modem Drivers_ENG (DM5.0b28).msi" /passive' SetOutPath $INSTDIR SetOverwrite ifdiff ; File /r * ; Delete /REBOOTOK "$INSTDIR\Setup.ini" ; Rename /REBOOTOK "$INSTDIR\Setup_Enterprise.ini" "$INSTDIR\Setup.ini" ; ExecWait '"$INSTDIR\Setup.exe" /S/v/qb!' SectionEnd SectionGroupEnd Section Descriptions !insertmacro MUI_FUNCTION_DESCRIPTION_BEGIN !insertmacro MUI_DESCRIPTION_TEXT ${SEC0000} $(SEC0000_DESC) !insertmacro MUI_DESCRIPTION_TEXT ${SEC0001} $(SEC0001_DESC) !insertmacro MUI_FUNCTION_DESCRIPTION_END Installer Language Strings TODO Update the Language Strings with the appropriate translations. LangString SEC0000_DESC ${LANG_ENGLISH} "Installation for non-Exchange/Enterprise BlackBerry Users" LangString SEC0001_DESC ${LANG_ENGLISH} "Installation for Exchange/Enterprise BlackBerry Users"

    Read the article

  • Need help configurating my Tomcat server

    - by gablin
    I just reinstalled my entire server, and now I can't seem to get my JSP-based website to work on Tomcat anymore. I use the same server.xml file, which worked perfectly before the reinstallation, but no longer. Here's the content of the server.xml file which worked before: <!--APR library loader. Documentation at /docs/apr.html --> <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> <!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html --> <Listener className="org.apache.catalina.core.JasperListener" /> <!-- JMX Support for the Tomcat server. Documentation at /docs/non-existent.html --> <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" /> <!-- Global JNDI resources Documentation at /docs/jndi-resources-howto.html --> <GlobalNamingResources> <!-- Editable user database that can also be used by UserDatabaseRealm to authenticate users --> <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources> <!-- A "Service" is a collection of one or more "Connectors" that share a single "Container" Note: A "Service" is not itself a "Container", so you may not define subcomponents such as "Valves" at this level. Documentation at /docs/config/service.html --> <Service name="Catalina"> <!--The connectors can use a shared executor, you can define one or more named thread pools--> <!-- <Executor name="tomcatThreadPool" namePrefix="catalina-exec-" maxThreads="150" minSpareThreads="4"/> --> <!-- A "Connector" represents an endpoint by which requests are received and responses are returned. Documentation at : Java HTTP Connector: /docs/config/http.html (blocking & non-blocking) Java AJP Connector: /docs/config/ajp.html APR (HTTP/AJP) Connector: /docs/apr.html Define a non-SSL HTTP/1.1 Connector on port 8080 --> <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> <!-- A "Connector" using the shared thread pool--> <!-- <Connector executor="tomcatThreadPool" port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> --> <!-- Define a SSL HTTP/1.1 Connector on port 8443 This connector uses the JSSE configuration, when using APR, the connector should be using the OpenSSL style configuration described in the APR documentation --> <!-- <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" /> --> <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" /> <!-- An Engine represents the entry point (within Catalina) that processes every request. The Engine implementation for Tomcat stand alone analyzes the HTTP headers included with the request, and passes them on to the appropriate Host (virtual host). Documentation at /docs/config/engine.html --> <!-- You should set jvmRoute to support load-balancing via AJP ie : <Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1"> --> <Engine name="Catalina" defaultHost="localhost"> <!--For clustering, please take a look at documentation at: /docs/cluster-howto.html (simple how to) /docs/config/cluster.html (reference documentation) --> <!-- <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/> --> <!-- The request dumper valve dumps useful debugging information about the request and response data received and sent by Tomcat. Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.valves.RequestDumperValve"/> --> <!-- This Realm uses the UserDatabase configured in the global JNDI resources under the key "UserDatabase". Any edits that are performed against this UserDatabase are immediately available for use by the Realm. --> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> <!-- Define the default virtual host Note: XML Schema validation will not work with Xerces 2.2. --> <!-- <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false"> --> <!-- SingleSignOn valve, share authentication between web applications Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> --> <!-- Access log processes all example. Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" prefix="localhost_access_log." suffix=".txt" pattern="common" resolveHosts="false"/> --> <!-- </Host> --> <Host name="www.rebootradio.nu"> <Alias>rebootradio.nu</Alias> <Context path="" docBase="D:/services/http/rebootradio.nu" debug="1" reloadable="true"/> </Host> </Engine> </Service> </Server> The JSP site doesn't use any WAR files or anything like that; there's just a default.jsp in the specified folder D:/services/http/rebootradio.nu which loads the site. As I said, this configuration worked before, but now with the latest verion of XAMPP and Tomcat it doesn't work anymore. All I get is a 404 message saying The requested resource () is not available.

    Read the article

  • Can I get a bitmap of an arbitrary window in another application process?

    - by Chris Farmer
    I am trying to automate a third-party Win32 application where I want to capture the graphics content of a particular window at defined time intervals. I am in the early phases of this, and I'm currently trying to use the Microsoft UI Automation API via C# to do most of the interaction between my client app and the external app. I can now get the external app to do what I want it to do, but now I want to capture the graphics from a specific window that seems to be some third-party owner-drawn control. How can I do this? The window I want to capture is the one marked by the red rectangle in this image: I have an implementation that sort of works, but it's dependent on the external app's UI being on top, and that's not guaranteed for me, so I'd prefer to find something more general. var p = Process.Start("c:\myapp.exe"); var mainForm = AutomationElement.FromHandle(p.MainWindowHandle); // "workspace" below is the window whose content I want to capture. var workspace = mainForm.FindFirst(TreeScope.Descendents, new PropertyCondition(AutomationElement.ClassNameProperty, "AfxFrameOrView70u")); var rect = (Rect) workspace.GetCurrentPropertyValue(AutomationElement.BoundingRectangleProperty); using (var bmp = new Bitmap((int)rect.Width, (int)rect.Height)) { using (var g = Graphics.FromImage(bmp)) { g.CopyFromScreen((int)rect.Left, (int)rect.Top, 0, 0, new Size((int)rect.Width, (int)rect.Height)); bmp.Save(@"c:\screenshot.png", ImageFormat.Png); } } The above works well enough when the automated app is on top, but it just blindly copies the screen in the rectangle, so my code is at the mercy of whatever happens to be running on the machine and might cover my app's window. I have read some suggestions to send the WM_PRINT message to the window. This question/answer from a few months back seemed promising, but when I use this code, I just get a white rectangle with none of my control's actual contents. var prop = (int)workspace.GetCurrentPropertyValue(AutomationElement.NativeWindowHandleProperty); var hwnd = new IntPtr(prop); using ( var bmp2 = new Bitmap((int)rect.Width, (int)rect.Height)) { using (Graphics g = Graphics.FromImage(bmp2)) { g.FillRectangle(SystemBrushes.Control, 0, 0, (int)rect.Width, (int)rect.Height); try { SendMessage(hwnd, WM_PRINT, g.GetHdc().ToInt32(), (int)(DrawingOptions.PRF_CHILDREN | DrawingOptions.PRF_CLIENT | DrawingOptions.PRF_OWNED)); } finally { g.ReleaseHdc(); } bmp2.Save(@"c:\screenshot.bmp"); } } So, first, is it even possible for me to reliably save a bitmap of a window's contents? If so, what is the best way, and what is wrong with my WM_PRINT with SendMessage attempt?

    Read the article

  • Cisco PIX 515 doesn't seem to be passing traffic through according to static route

    - by Liquidkristal
    Ok, so I am having a spot of bother with a Cisco PIX515, I have posted the current running config below, now I am no cisco expert by any means although I can do basic stuff with them, now I am having trouble with traffic sent from the outside to address: 10.75.32.25 it just doesn't appear to be going anywhere. Now this firewall is deep inside a private network, with an upstream firewall that we don't manage. I have spoken to the people that look after that firewall and they say they they have traffic routing to 10.75.32.21 and 10.75.32.25 and thats it (although there is a website that runs from the server 172.16.102.5 which (if my understanding is correct) gets traffic via 10.75.32.23. Any ideas would be greatly appreciated as to me it should all just work, but its not (obviously if the config is all correct then there could be a problem with the web server that we are trying to access on 10.75.32.25, although the users say that they can get to it internally (172.16.102.8) which is even more confusing) PIX Version 6.3(3) interface ethernet0 auto interface ethernet1 auto interface ethernet2 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif ethernet2 academic security50 fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 195.157.180.168 outsideNET name 195.157.180.170 globalNAT name 195.157.180.174 gateway name 195.157.180.173 Mail-Global name 172.30.31.240 Mail-Local name 10.75.32.20 outsideIF name 82.219.210.17 frogman1 name 212.69.230.79 frogman2 name 78.105.118.9 frogman3 name 172.16.0.0 acadNET name 172.16.100.254 acadIF access-list acl_outside permit icmp any any echo-reply access-list acl_outside permit icmp any any unreachable access-list acl_outside permit icmp any any time-exceeded access-list acl_outside permit tcp any host 10.75.32.22 eq smtp access-list acl_outside permit tcp any host 10.75.32.22 eq 8383 access-list acl_outside permit tcp any host 10.75.32.22 eq 8385 access-list acl_outside permit tcp any host 10.75.32.22 eq 8484 access-list acl_outside permit tcp any host 10.75.32.22 eq 8485 access-list acl_outside permit ip any host 10.75.32.30 access-list acl_outside permit tcp any host 10.75.32.25 eq https access-list acl_outside permit tcp any host 10.75.32.25 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq https access-list acl_outside permit tcp host frogman1 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman2 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman3 host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.23 eq 2001 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp any host 10.75.32.23 eq smtp access-list acl_outside permit tcp any host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.24 eq ssh access-list acl_acad permit icmp any any echo-reply access-list acl_acad permit icmp any any unreachable access-list acl_acad permit icmp any any time-exceeded access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq www access-list acl_acad deny tcp any any eq www access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq https access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq 8080 access-list acl_acad permit tcp host 172.16.102.5 host 10.64.1.115 eq smtp pager lines 24 logging console debugging mtu outside 1500 mtu inside 1500 mtu academic 1500 ip address outside outsideIF 255.255.252.0 no ip address inside ip address academic acadIF 255.255.0.0 ip audit info action alarm ip audit attack action alarm pdm history enable arp timeout 14400 global (outside) 1 10.75.32.21 nat (academic) 1 acadNET 255.255.0.0 0 0 static (academic,outside) 10.75.32.22 Mail-Local netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.30 172.30.30.36 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.23 172.16.102.5 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.24 172.16.102.6 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.25 172.16.102.8 netmask 255.255.255.255 0 0 access-group acl_outside in interface outside access-group acl_acad in interface academic route outside 0.0.0.0 0.0.0.0 10.75.32.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius aaa-server LOCAL protocol local snmp-server host outside 172.31.10.153 snmp-server host outside 172.31.10.154 snmp-server host outside 172.31.10.155 no snmp-server location no snmp-server contact snmp-server community CPQ_HHS no snmp-server enable traps floodguard enable telnet 172.30.31.0 255.255.255.0 academic telnet timeout 5 ssh timeout 5 console timeout 0 terminal width 120 Cryptochecksum:hi2u : end PIX515#

    Read the article

  • Optimizing jQuery for Tabs

    - by jpdbaugh
    I am in the process of developing a widget. The widget has three tabs that are implemented in the following way. <div id="widget"> <ul id="tabs"> <li><a href="http...">One</a></li> <li><a href="http...">Two</a></li> <li><a href="http...">Three</a></li> </ul> <div id="tab_container"> <div id="tab_content"> //Tab Content goes here... </div> </div> </div> // The active class is initialized when the document loads $("#tabs li a").click(function() { $("#tabs li.active").removeClass("active"); $("#tab_content").load($(this).attr('href')); $(this).parent().addClass("active"); return false; }); The problem I am having is that the jquery code that have written is very slow. If the user changes tabs quickly the widget gets behing and bogged down. This causes the tabs to to not align with the data being displayed and just general lag. I believe that this is because the tab is being changed before $.load() is finished. I have tried to implement the following: ("#tabs li a").click(function() { $("#tabs li.active").removeClass("active"); $("#tab_content").load($(this).attr('href'), function (){ $(this).parent().addClass("active"); }); return false; }); It is my understanding that the callback function within in the load function does not execute until the load function is completed. I think this would solve my problem, however I can not come up with a way to select the correct tab that was clicked within the callback function. If this is not the way to do this then what is the best way implement these tabs so that they would stop loading an old request and load the newest tab selection by the user? Thanks

    Read the article

  • Closure Tables - Is this enough data to display a tree view?

    - by James Pitt
    Here is the table I have created by testing the closure table method. | id | parentId | childId | hops | | | | | 270 | 6 | 6 | 0 | 271 | 7 | 7 | 0 | 272 | 8 | 8 | 0 | 273 | 9 | 9 | 0 | 276 | 10 | 10 | 0 | 281 | 9 | 10 | 1 | 282 | 7 | 9 | 1 | 283 | 7 | 10 | 2 | 285 | 7 | 8 | 1 | 286 | 6 | 7 | 1 | 287 | 6 | 9 | 2 | 288 | 6 | 10 | 3 | 289 | 6 | 8 | 2 | 293 | 6 | 9 | 1 | 294 | 6 | 10 | 2 I am trying to create a simple tree of this using PHP. There does not seem to be enough data to create the table. For example, when I look purely at parentId = 6: -Part 6 -Part 7 - ? - ? -Part 9 - ? - ? We know that parts 8 and 10 exists below Part 7 or 9, but not which. We know that part 10 exists at both 3 and 4 nodes deep but where? If I look at other data in the table it is possible to tell it should be: - Part 6 - Part 7 - Part 9 - Part 10 - Part 9 - Part 10 I thought one of the benefits of closure tables was there was no need for recursive queries? Could you help explain what I am doing wrong? EDIT: For clarification, this is a mapping table. There is another table called "parts" which has a column called part_id that correlates to both the parentId and childId columns in the "closure" table. The "id" column in the table above (closure) is just for the purposes of maintaining a primary key. It is not really necessary. The methods I have used to create this closure table is described in the following article: http://dirtsimple.org/2010/11/simplest-way-to-do-tree-based-queries.html EDIT2: It can have two and three hops. I will explain easier by assigning names to the items. Part 6 = Bicycle Part 7 = Gears Part 8 = Chain Part 9 = Bolt Part 10 = Nut Nut is part of Bolt. The Bolt and Nut combo exists directly within Bicycle and within Gears which is part of Bicycle. In relation to what method to use I have looked at Adjacency, Edges, Enum Paths, Closures, DAGS(networks) and the Nested Set Model. I am still trying to work out what is what, but this is an extremely complex component database where there are multiple parents and any modification to a sub-tree must propogate through the other trees. More importantly there will be insertions, deletions and tree views that I wish to avoid recursion during general use, even at the cost of database space and query time during entry.

    Read the article

  • (static initialization order?!) problems with factory pattern

    - by smerlin
    Why does following code raise an exception (in createObjects call to map::at) alternativly the code (and its output) can be viewed here intererestingly the code works as expected if the commented lines are uncommented with both microsoft and gcc compiler (see here), this even works with initMap as ordinary static variable instead of static getter. The only reason for this i can think of is that the order of initialization of the static registerHelper_ object (factory_helper_)and the std::map object (initMap) are wrong, however i cant see how that could happen, because the map object is constructed on first usage and thats in factory_helper_ constructor, so everything should be alright shouldnt it ? I am even more suprised that those doNothing() lines fix the issue, because that call to doNothing() would happen after the critical section (which currently fails) is passed anyway. EDIT: debugging showed, that without the call to factory_helper_.doNothing(), the constructor of factory_helper_ is never called. #include <iostream> #include <string> #include <map> #define FACTORY_CLASS(classtype) \ extern const char classtype##_name_[] = #classtype; \ class classtype : FactoryBase<classtype,classtype##_name_> namespace detail_ { class registerHelperBase { public: registerHelperBase(){} protected: static std::map<std::string, void * (*)(void)>& getInitMap() { static std::map<std::string, void * (*)(void)>* initMap = 0; if(!initMap) initMap= new std::map<std::string, void * (*)(void)>(); return *initMap; } }; template<class TParent, const char* ClassName> class registerHelper_ : registerHelperBase { static registerHelper_ help_; public: //void doNothing(){} registerHelper_(){ getInitMap()[std::string(ClassName)]=&TParent::factory_init_; } }; template<class TParent, const char* ClassName> registerHelper_<TParent,ClassName> registerHelper_<TParent,ClassName>::help_; } class Factory : detail_::registerHelperBase { private: Factory(); public: static void* createObject(const std::string& objclassname) { return getInitMap().at(objclassname)(); } }; template <class TClass, const char* ClassName> class FactoryBase { private: static detail_::registerHelper_<FactoryBase<TClass,ClassName>,ClassName> factory_helper_; static void* factory_init_(){ return new TClass();} public: friend class detail_::registerHelper_<FactoryBase<TClass,ClassName>,ClassName>; FactoryBase(){ //factory_helper_.doNothing(); } virtual ~FactoryBase(){}; }; template <class TClass, const char* ClassName> detail_::registerHelper_<FactoryBase<TClass,ClassName>,ClassName> FactoryBase<TClass,ClassName>::factory_helper_; FACTORY_CLASS(Test) { public: Test(){} }; int main(int argc, char** argv) { try { Test* test = (Test*) Factory::createObject("Test"); } catch(const std::exception& ex) { std::cerr << "caught std::exception: "<< ex.what() << std::endl; } #ifdef _MSC_VER system("pause"); #endif return 0; }

    Read the article

  • C# Detect Localhost Port Usage

    - by ThaKidd
    In advance, thank you for your advice. I am currently working on a program which uses Putty to create a SSH connection with a server that uses local port forwarding to enable a client, running my software, to access the service behind the SSH server via localhost. IE: client:20100 - Internet - Remote SSH server exposed via router/firewall - Local Intranet - Intranet Web POP3 Server:110. Cmd Line: "putty -ssh -2 -P 22 -C -L 20100:intranteIP:110 -pw sshpassword sshusername@sshserver" Client would use putty to create a SSH connection with the SSH server specifying in the connection string that it would like to tie port 110 of the Intranet POP3 Server to port 20100 on the client system. Therefore the client would be able to open up a mail client to localhost:20100 and interact with the Internal POP3 server over the SSH tunnel. The above is a general description. I already know what I am trying to do will work without a problem so am not looking for debate on the above. The question is this...How can I ensure the local port (I cannot use dynamic ports, so it must be static) on localhost is not being used or listened to by any other application? I am currently executing this code in my C# app: private bool checkPort(int port) { try { //Create a socket on the current IPv4 address Socket TestSocket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); // Create an IP end point IPEndPoint localIP = new IPEndPoint(IPAddress.Parse("127.0.0.1"), port); // Bind that port TestSocket.Bind(localIP); // Cleanup TestSocket.Close(); return false; } catch (Exception e) { // Exception occurred. Port is already bound. return true; } } I am currently calling this function starting with a specific port in a for loop to get the 'false' return at the first available port. The first port I try is actually being listened to by uTorrent. The above code does not catch this and my connection fails. What is the best method to ensure a port is truly free? I do understand some other program may grab the port during/after I have tested it. I just need to find something that will ensure it is not currently in use AT ALL when the test is executed. If there is a way to truly reserve the localhost port during the test, I would love to hear about it.

    Read the article

  • Java Refuses to Start - Could not reserve enough space for object heap

    - by Randyaa
    Background We have a pool of aproximately 20 linux blades. Some are running Suse, some are running Redhat. ALL share NAS space which contains the following 3 folders: /NAS/app/java - a symlink that points to an installation of a Java JDK. Currently version 1.5.0_10 /NAS/app/lib - a symlink that points to a version of our application. /NAS/data - directory where our output is written All our machines have 2 processors (hyperthreaded) with 4gb of physical memory and 4gb of swap space. We limit the number of 'jobs' each machine can process at a given time to 6 (this number likely needs to change, but that does not enter into the current problem so please ignore it for the time being). Some of our jobs set a Max Heap size of 512mb, some others reserve a Max Heap size of 2048mb. Again, we realize we could go over our available memory if 6 jobs started on the same machine with the heap size set to 2048, but to our knowledge this has not yet occurred. The Problem Once and a while a Job will fail immediately with the following message: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. We used to chalk this up to too many jobs running at the same time on the same machine. The problem happened infrequently enough (MAYBE once a month) that we'd just restart it and everything would be fine. The problem has recently gotten much worse. All of our jobs which request a max heap size of 2048m fail immediately almost every time and need to get restarted several times before completing. We've gone out to individual machines and tried executing them manually with the same result. Debugging It turns out that the problem only exists for our SuSE boxes. The reason it has been happening more frequently is becuase we've been adding more machines, and the new ones are SuSE. 'cat /proc/version' on the SuSE boxes give us: Linux version 2.6.5-7.244-bigsmp (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 SMP Mon Dec 12 18:32:25 UTC 2005 'cat /proc/version' on the RedHat boxes give us: Linux version 2.4.21-32.0.1.ELsmp ([email protected]) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-52)) #1 SMP Tue May 17 17:52:23 EDT 2005 'uname -a' gives us the following on BOTH types of machines: UTC 2005 i686 i686 i386 GNU/Linux No jobs are running on the machine, and no other processes are utilizing much memory. All of the processes currently running might be using 100mb total. 'top' currently shows the following: Mem: 4146528k total, 3536360k used, 610168k free, 132136k buffers Swap: 4194288k total, 0k used, 4194288k free, 3283908k cached 'vmstat' currently shows the following: procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 610292 132136 3283908 0 0 0 2 26 15 0 0 100 0 If we kick off a job with the following command line (Max Heap of 1850mb) it starts fine: java/bin/java -Xmx1850M -cp helloworld.jar HelloWorld Hello World If we bump up the max heap size to 1875mb it fails: java/bin/java -Xmx1875M -cp helloworld.jar HelloWorld Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. It's quite clear that the memory currently being used is for Buffering/Caching and that's why so little is being displayed as 'free'. What isn't clear is why there is a magical 1850mb line where anything higher means Java can't start. Any explanations would be greatly appreciated.

    Read the article

  • Available Coroutine Libraries in Java

    - by JUST MY correct OPINION
    I would like to do some stuff in Java that would be clearer if written using concurrent routines, but for which full-on threads are serious overkill. The answer, of course, is the use of coroutines, but there doesn't appear to be any coroutine support in the standard Java libraries and a quick Google on it brings up tantalising hints here or there, but nothing substantial. Here's what I've found so far: JSIM has a coroutine class, but it looks pretty heavyweight and conflates, seemingly, with threads at points. The point of this is to reduce the complexity of full-on threading, not to add to it. Further I'm not sure that the class can be extracted from the library and used independently. Xalan has a coroutine set class that does coroutine-like stuff, but again it's dubious if this can be meaningfully extracted from the overall library. It also looks like it's implemented as a tightly-controlled form of thread pool, not as actual coroutines. There's a Google Code project which looks like what I'm after, but if anything it looks more heavyweight than using threads would be. I'm basically nervous of something that requires software to dynamically change the JVM bytecode at runtime to do its work. This looks like overkill and like something that will cause more problems than coroutines would solve. Further it looks like it doesn't implement the whole coroutine concept. By my glance-over it gives a yield feature that just returns to the invoker. Proper coroutines allow yields to transfer control to any known coroutine directly. Basically this library, heavyweight and scary as it is, only gives you support for iterators, not fully-general coroutines. The promisingly-named Coroutine for Java fails because it's a platform-specific (obviously using JNI) solution. And that's about all I've found. I know about the native JVM support for coroutines in the Da Vinci Machine and I also know about the JNI continuations trick for doing this. These are not really good solutions for me, however, as I would not necessarily have control over which VM or platform my code would run on. (Indeed any bytecode manipulation system would suffer similar problems -- it would be best were this pure Java if possible. Runtime bytecode manipulation would restrict me from using this on Android, for example.) So does anybody have any pointers? Is this even possible? If not, will it be possible in Java 7? Edited to add: Just to ensure that confusion is contained, this is a related question to my other one, but not the same. This one is looking for an existing implementation in a bid to avoid reinventing the wheel unnecessarily. The other one is a question relating to how one would go about implementing coroutines in Java should this question prove unanswerable. The intent is to keep different questions on different threads.

    Read the article

  • How to combine designable components with dependency injection

    - by Wim Coenen
    When creating a designable .NET component, you are required to provide a default constructor. From the IComponent documentation: To be a component, a class must implement the IComponent interface and provide a basic constructor that requires no parameters or a single parameter of type IContainer. This makes it impossible to do dependency injection via constructor arguments. (Extra constructors could be provided, but the designer would ignore them.) Some alternatives we're considering: Service Locator Don't use dependency injection, instead use the service locator pattern to acquire dependencies. This seems to be what IComponent.Site.GetService is for. I guess we could create a reusable ISite implementation (ConfigurableServiceLocator?) which can be configured with the necessary dependencies. But how does this work in a designer context? Dependency Injection via properties Inject dependencies via properties. Provide default instances if they are necessary to show the component in a designer. Document which properties need to be injected. Inject dependencies with an Initialize method This is much like injection via properties but it keeps the list of dependencies that need to be injected in one place. This way the list of required dependencies is documented implicitly, and the compiler will assists you with errors when the list changes. Any idea what the best practice is here? How do you do it? edit: I have removed "(e.g. a WinForms UserControl)" since I intended the question to be about components in general. Components are all about inversion of control (see section 8.3.1 of the UMLv2 specification) so I don't think that "you shouldn't inject any services" is a good answer. edit 2: It took some playing with WPF and the MVVM pattern to finally "get" Mark's answer. I see now that visual controls are indeed a special case. As for using non-visual components on designer surfaces, I think the .NET component model is fundamentally incompatible with dependency injection. It appears to be designed around the service locator pattern instead. Maybe this will start to change with the infrastructure that was added in .NET 4.0 in the System.ComponentModel.Composition namespace.

    Read the article

  • Various GPS Android Functionality Questions..

    - by Tyler
    Hello - I have a few questions (so far) with the the LocationManager on Android and GPS in general.. Feel free to answer any number of the questions below, and I appreciate your help in advance! (I noticed this stuff doesn't appear to be documented very well, so hopefully these questions will help others out too!) 1) I am using the following code, but I think there may be extra fluff in here that I do not need. Can you tell me if I can delete any of this? LocationManager lm = (LocationManager) getSystemService(Context.LOCATION_SERVICE); LocationListener locationListener = new MyLocationListener(); lm.requestLocationUpdates(LocationManager.GPS_PROVIDER, 0, 0, locationListener); LocationProvider locationProvider = lm.getProvider("gps"); Location currentLocation = lm.getLastKnownLocation(locationProvider.getName()); 2) Is there a way to hold off on the last step (accessing "getLastKnownLocation" until after I am sure I have a GPS lock? What happens if this is called and GPS is still looking for signal? 3) MOST importantly, I want to ensure I have a GPS lock before I proceed to my next method, so is there a way to check to see if GPS is locked on and getLastKnownLocation is up to date? 4) Is there a way to 'shut down' the GPS listener once it does receive a lock and getLastKnownLocation is updated? I don't see a need to keep this running for my application once I have obtained a lock.. 5) Can you please confirm my assumption that "getLastKnownLocation" is updated frequently as the receiver moves? 6) In my code, I also have a class called "MyLocationListener" (code below) that I honestly just took from another example.. Is this actually needed? I assume this updates my location manager whenever the location changes, but it sure doesn't appear that there is much to the class itself! private class MyLocationListener implements LocationListener { @Override public void onLocationChanged(Location loc) { if (loc != null) { //Toast.makeText(getBaseContext(), "Location changed : Lat: " + loc.getLatitude() + " Lng: " + loc.getLongitude(), Toast.LENGTH_SHORT).show(); } } @Override public void onProviderDisabled(String provider) { // TODO Auto-generated method stub } @Override public void onProviderEnabled(String provider) { // TODO Auto-generated method stub } @Override public void onStatusChanged(String provider, int status, Bundle extras) { // TODO Auto-generated method stub } }

    Read the article

  • Constructing a Binary Tree from its traversals

    - by user991710
    I'm trying to construct a binary tree (unbalanced), given its traversals. I'm currently doing preorder + inorder but when I figure this out postorder will be no issue at all. I realize there are some question on the topic already but none of them seemed to answer my question. I've got a recursive method that takes the Preorder and the Inorder of a binary tree to reconstruct it, but is for some reason failing to link the root node with the subsequent children. Note: I don't want a solution. I've been trying to figure this out for a few hours now and even jotted down the recursion on paper and everything seems fine... so I must be missing something subtle. Here's the code: public static <T> BinaryNode<T> prePlusIn( T[] pre, T[] in) { if(pre.length != in.length) throw new IllegalArgumentException(); BinaryNode<T> base = new BinaryNode(); base.element = pre[0]; // * Get root from the preorder traversal. int indexOfRoot = 0; if(pre.length == 0 && in.length == 0) return null; if(pre.length == 1 && in.length == 1 && pre[0].equals(in[0])) return base; // * If both arrays are of size 1, element is a leaf. for(int i = 0; i < in.length -1; i++){ if(in[i].equals(base.element)){ // * Get the index of the root indexOfRoot = i; // in the inorder traversal. break; } // * If we cannot, the tree cannot be constructed as the traversals differ. else throw new IllegalArgumentException(); } // * Now, we recursively set the left and right subtrees of // the above "base" root node to whatever the new preorder // and inorder traversals end up constructing. T[] preleft = Arrays.copyOfRange(pre, 1, indexOfRoot + 1); T[] preright = Arrays.copyOfRange(pre, indexOfRoot + 1, pre.length); T[] inleft = Arrays.copyOfRange(in, 0, indexOfRoot); T[] inright = Arrays.copyOfRange(in, indexOfRoot + 1, in.length); base.left = prePlusIn( preleft, inleft); // * Construct left subtree. base.right = prePlusIn( preright, inright); // * Construc right subtree. return base; // * Return fully constructed tree } Basically, I construct additional arrays that house the pre- and inorder traversals of the left and right subtree (this seems terribly inefficient but I could not think of a better way with no helpers methods). Any ideas would be quite appreciated. Side note: While debugging it seems that the root note never receives the connections to the additional nodes (they remain null). From what I can see though, that should not happen... EDIT: To clarify, the method is throwing the IllegalArgumentException @ line 21 (else branch of the for loop, which should only be thrown if the traversals contain different elements.

    Read the article

  • DCVS + hosting for a startup commercial multiplatform phone app

    - by AG
    I'm in lean startup mode, working on a simple phone app that will be published initially as a iThingy app and an Android app with, possibly, Blackberry and Symbian versions to follow. I'm about to go from no repository to needing a central repository that up to 4 very part-time resources will be sharing. Two of us have no version control background, one has used Subversion, and I've used most of the major centralized VCS systems. I'm not going to be pushing the technical limitations of any VCS for a long time; I'm sure that any of the major systems would work fine. And the hosting accounts I've looked at seem reasonable. So I'm really focussed on minimizing the downside risks. That is, I'd like to find a stable setup that is easy to learn in general, easy to use from Windows/Eclipse, and won't paint me into any obvious corners for the next 12 months or so. A quick search of the web had led me to consider the following pairs of DVCS and hosting service, with what I think I'm hearing as their strengths and weaknesses (for my purposes): Bazaar/Launchpad -- My initial choice since I need to get more familiar with this pair for the Google Summer of Code mentoring I'm doing. But, whatever the technical merits, a non-starter for me because they are purely open source, no private repositories plans to purchase that I can see. Git/GitHub -- Git: Fast, light, ultimately flexible, but relatively less Windows friendly, Eclipse plugin (eGit) available but relatively young, GitHub: widely used, pricing is fine Mercurial/BitBucket -- Mercurial: a little less flexible, a little more Windows friendly, Eclipse plugin seems a bit more mature, BitBucket: widely used, pricing is fine, includes a wiki and an issue tracker that we might be able to use instead of something like BaseCamp, at least for a while. Mercurial/BitBucket seem like the winning pair so far for my particular situation; at least two of us are definitely going to be working mostly from Eclipse on Windows and reducing my own learning curve is a priority. ;-) But I have two specific questions: 1) Am I wrong about Bazaar/Launchpad and is there a viable, secure way to use them for proprietary code? 2) Any reason to think that the Mecurial/Bitbucket pair will end up being a headache for my Mac developer, soon, or for Blackberry or Symbian developers a little later? ag

    Read the article

  • Adding NavigationControl to a TabBar Application containing UITableViews

    - by kungfuslippers
    Hi, I'm new to iPhone dev and wanted to get advice on the general design pattern / guide for putting a certain kind of app together. I'm trying to build a TabBar type application. One of the tabs needs to display a TableView and selecting a cell from within the table view will do something else - maybe show another table view or a web page. I need a Navigation Bar to be able to take me back from the table view/web page. The approach I've taken so far is to: Create an app based around UITabBarController as the rootcontroller i.e. @interface MyAppDelegate : NSObject <UIApplicationDelegate> { IBOutlet UIWindow *window; IBOutlet UITabBarController *rootController; } Create a load of UIViewController derived classes and associated NIBs and wire everything up in IB so when I run the app I get the basic tabs working. I then take the UIViewController derived class and modify it to the following: @interface MyViewController : UIViewController<UITableViewDataSource, UITableViewDelegate> { } and I add the delegate methods to the implementation of MyViewController - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return 2; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier] autorelease]; } if (indexPath.row == 0) { cell.textLabel.text = @"Mummy"; } else { cell.textLabel.text = @"Daddy"; } return cell; } Go back to IB , open MyViewController.xib and drop a UITableView onto it. Set the Files Owner to be MyViewController and then set the delegate and datasource of the UITableView to be MyViewController. If I run the app now, I get the table view appearing with mummy and daddy working nicely. So far so good. The question is how do I go about incorporating a Navigation Bar into my current code for when I implement: - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath() { // get row selected NSUInteger row = [indexPath row]; if (row == 0) { // Show another table } else if (row == 1) { // Show a web view } } Do I drop a NavigationBar UI control onto MyControllerView.xib ? Should I create it programmatically? Should I be using a UINavigationController somewhere ? I've tried dropping a NavigationBar onto my MyControllerView.xib in IB but its not shown when I run the app, only the TableView is displayed.

    Read the article

  • Memory efficient int-int dict in Python

    - by Bolo
    Hi, I need a memory efficient int-int dict in Python that would support the following operations in O(log n) time: d[k] = v # replace if present v = d[k] # None or a negative number if not present I need to hold ~250M pairs, so it really has to be tight. Do you happen to know a suitable implementation (Python 2.7)? EDIT Removed impossible requirement and other nonsense. Thanks, Craig and Kylotan! To rephrase. Here's a trivial int-int dictionary with 1M pairs: >>> import random, sys >>> from guppy import hpy >>> h = hpy() >>> h.setrelheap() >>> d = {} >>> for _ in xrange(1000000): ... d[random.randint(0, sys.maxint)] = random.randint(0, sys.maxint) ... >>> h.heap() Partition of a set of 1999530 objects. Total size = 49161112 bytes. Index Count % Size % Cumulative % Kind (class / dict of class) 0 1 0 25165960 51 25165960 51 dict (no owner) 1 1999521 100 23994252 49 49160212 100 int On average, a pair of integers uses 49 bytes. Here's an array of 2M integers: >>> import array, random, sys >>> from guppy import hpy >>> h = hpy() >>> h.setrelheap() >>> a = array.array('i') >>> for _ in xrange(2000000): ... a.append(random.randint(0, sys.maxint)) ... >>> h.heap() Partition of a set of 14 objects. Total size = 8001108 bytes. Index Count % Size % Cumulative % Kind (class / dict of class) 0 1 7 8000028 100 8000028 100 array.array On average, a pair of integers uses 8 bytes. I accept that 8 bytes/pair in a dictionary is rather hard to achieve in general. Rephrased question: is there a memory-efficient implementation of int-int dictionary that uses considerably less than 49 bytes/pair?

    Read the article

  • Sanity Check: change event not firing first time using keyboard

    - by macca1
    I've done a good amount of research on this and found a bunch of reported problems and solutions but the general consensus seems that all change problems in IE6 were fixed in jQuery 1.4.2. I'm having an issue where a change event is not firing in jQuery 1.4.2, but it did fire successfully in jQuery 1.3.2. This is in IE6. I'm about to submit a bug for this, but for my sanity I wanted to post it here first to see if there's something dumb I'm missing. I don't understand why this is working this way... <HTML> <HEAD> <TITLE>jQuery 1.4.2 Problem </TITLE> <script src="jquery-1.4.2.min.js" type="text/javascript"></script> <script> $(document).ready( function() { $("#firstBox").change(function() { alert("CHANGE"); }); // ONLOAD of document autofocus into the first element... $("form").find(":input:visible:first").focus() }); </script> </HEAD> <BODY> <form> <select id="firstBox"> <option value="" selected="selected">--</option> <option value="1">One</option> <option value="2">Two</option> </select> <br><br> <input size="10" id="secondBox"> </form> </BODY> </HTML> Simple enough, right? Onload of the page, give the first element focus. Onchange of the first element, alert. If you use the mouse, it works as expected. The page loads, the focus is in the drop down, you change the option, you get the alert. The problem is if you use the keyboard. The page loads, the focus is in the drop down, you press the down arrow. The option changes. Tab off the field, no alert. Weird. To make it even weirder, if you tab back into the field and change it again (all using the keyboard), the change event DOES fire after tab out this time. Any ideas?

    Read the article

  • Calculating rotation and translation matrices between two odometry positions for monocular linear triangulation

    - by user1298891
    Recently I've been trying to implement a system to identify and triangulate the 3D position of an object in a robotic system. The general outline of the process goes as follows: Identify the object using SURF matching, from a set of "training" images to the actual live feed from the camera Move/rotate the robot a certain amount Identify the object using SURF again in this new view Now I have: a set of corresponding 2D points (same object from the two different views), two odometry locations (position + orientation), and camera intrinsics (focal length, principal point, etc.) since it's been calibrated beforehand, so I should be able to create the 2 projection matrices and triangulate using a basic linear triangulation method as in Hartley & Zissermann's book Multiple View Geometry, pg. 312. Solve the AX = 0 equation for each of the corresponding 2D points, then take the average In practice, the triangulation only works when there's almost no change in rotation; if the robot even rotates a slight bit while moving (due to e.g. wheel slippage) then the estimate is way off. This also applies for simulation. Since I can only post two hyperlinks, here's a link to a page with images from the simulation (on the map, the red square is simulated robot position and orientation, and the yellow square is estimated position of the object using linear triangulation.) So you can see that the estimate is thrown way off even by a little rotation, as in Position 2 on that page (that was 15 degrees; if I rotate it any more then the estimate is completely off the map), even in a simulated environment where a perfect calibration matrix is known. In a real environment when I actually move around with the robot, it's worse. There aren't any problems with obtaining point correspondences, nor with actually solving the AX = 0 equation once I compute the A matrix, so I figure it probably has to do with how I'm setting up the two camera projection matrices, specifically how I'm calculating the translation and rotation matrices from the position/orientation info I have relative to the world frame. How I'm doing that right now is: Rotation matrix is composed by creating a 1x3 matrix [0, (change in orientation angle), 0] and then converting that to a 3x3 one using OpenCV's Rodrigues function Translation matrix is composed by rotating the two points (start angle) degrees and then subtracting the final position from the initial position, in order to get the robot's straight and lateral movement relative to its starting orientation Which results in the first projection matrix being K [I | 0] and the second being K [R | T], with R and T calculated as described above. Is there anything I'm doing really wrong here? Or could it possibly be some other problem? Any help would be greatly appreciated.

    Read the article

  • sending email on local machine is not working.

    - by haansi
    I am using my gmail's email account to send emails in asp.net website. It works fine on hosting server but it donot works if I try to sent email on loclserver. Please guide me what I should do to make it sending emails even on localserver ? Do I need to install some smtp server on my local machine ? I have not installed any smtp server on my machine. How and where from I can get smtp server and kindly also guide how I can do its setting to use on local machine. Thnaks Here is my Code public string SendEmail(Email email) { string errmsg = null; if (dt != null) { try { dt = systemrep.GetSystemInfo(); dr = dt.Rows[0]; From = dr["nm_EmailFrom"].ToString(); SMTP = dr["nm_SMTP"].ToString(); Port = dr["amt_Port"].ToString(); EmailId = dr["nm_emailUserId"].ToString(); EmailPassword = dr["nm_emailPassword"].ToString(); DefaultCredations = Convert.ToBoolean(dr["ind_Credentials"].ToString()); MailMessage message = new MailMessage(); SmtpClient smtp = new SmtpClient(); NetworkCredential mailAuthentication = new NetworkCredential(EmailId, EmailPassword); message.To.Add(new MailAddress(email.To)); message.From = new MailAddress(From); message.IsBodyHtml = true; message.Subject = email.Subject; message.Body = email.Message; smtp.UseDefaultCredentials = DefaultCredations; smtp.EnableSsl = true; smtp.Port = 25; smtp.DeliveryMethod = SmtpDeliveryMethod.Network; smtp.Host = SMTP; smtp.Credentials = new NetworkCredential(EmailId, EmailPassword); smtp.Send(message); } catch (SmtpException smtpEx) { errmsg = string.Format("alert('There was a problem in sending the email: {0}');", smtpEx.Message.Replace("'", "\\'")); } catch (Exception generalEx) { errmsg = string.Format("alert('There was a general problem: {0}');", generalEx.Message.Replace("'", "\\'")); } } else errmsg = "An error accured whilte getting email settings from database, process couldn't be completed"; return errmsg; } }

    Read the article

  • Android USB Host Communication

    - by Kip Russell
    I'm working on a project that utilizes the USB Host capabilities in Android 3.2. I'm suffering from a deplorable lack of knowledge and talent regarding USB/Serial communication in general. I'm also unable to find any good example code for what I need to do. I need to read from a USB Communication Device. Ex: When I connect via Putty (on my PC) I enter: >GO And the device starts spewing out data for me. Pitch/Roll/Temp/Checksum. Ex: $R1.217P-0.986T26.3*60 $R1.217P-0.986T26.3*60 $R1.217P-0.987T26.3*61 $R1.217P-0.986T26.3*60 $R1.217P-0.985T26.3*63 I can send the initial 'GO' command from the Android device at which time I receive an echo of 'GO'. Then nothing else on any subsequent reads. How can I: 1) Send the 'go' command. 2) Read in the stream of data that results. The USB device I'm working with has the following interfaces (endpoints). Device Class: Communication Device (0x2) Interfaces: Interface #0 Class: Communication Device (0x2) Endpoint #0 Direction: Inbound (0x80) Type: Intrrupt (0x3) Poll Interval: 255 Max Packet Size: 32 Attributes: 000000011 Interface #1 Class: Communication Device Class (CDC) (0xa) Endpoint #0 Address: 129 Number: 1 Direction: Inbound (0x80) Type: Bulk (0x2) Poll Interval (0) Max Packet Size: 32 Attributes: 000000010 Endpoint #1 Address: 2 Number: 2 Direction: Outbound (0x0) Type: Bulk (0x2) Poll Interval (0) Max Packet Size: 32 Attributes: 000000010 I'm able to deal with permission, connect to the device, find the correct interface and assign the endpoints. I'm just having trouble figuring out which technique to use to send the initial command read the ensuing data. I'm tried different combinations of bulkTransfer and controlTransfer with no luck. Thanks. I'm using interface#1 as seen below: public AcmDevice(UsbDeviceConnection usbDeviceConnection, UsbInterface usbInterface) { Preconditions.checkState(usbDeviceConnection.claimInterface(usbInterface, true)); this.usbDeviceConnection = usbDeviceConnection; UsbEndpoint epOut = null; UsbEndpoint epIn = null; // look for our bulk endpoints for (int i = 0; i < usbInterface.getEndpointCount(); i++) { UsbEndpoint ep = usbInterface.getEndpoint(i); Log.d(TAG, "EP " + i + ": " + ep.getType()); if (ep.getType() == UsbConstants.USB_ENDPOINT_XFER_BULK) { if (ep.getDirection() == UsbConstants.USB_DIR_OUT) { epOut = ep; } else if (ep.getDirection() == UsbConstants.USB_DIR_IN) { epIn = ep; } } } if (epOut == null || epIn == null) { throw new IllegalArgumentException("Not all endpoints found."); } AcmReader acmReader = new AcmReader(usbDeviceConnection, epIn); AcmWriter acmWriter = new AcmWriter(usbDeviceConnection, epOut); reader = new BufferedReader(acmReader); writer = new BufferedWriter(acmWriter); }

    Read the article

  • Move options between multiple dropdown lists

    - by Martha
    We currently have a form with the standard multi-select functionality of "here are the available options, here are the selected options, here are some buttons to move stuff back and forth." However, the client now wants the ability to not just select certain items, but to also categorize them. For example, given a list of books, they want to not just select the ones they own, but also the ones they've read, the ones they would like to read, and the ones they've heard about. (All examples fictional.) Thankfully, a selected item can only be in one category at a time. I can find many examples of moving items between listboxes, but not a single one for moving items between multiple listboxes. To add to the complication, the form needs to have two sets of list+categories, e.g. a list of movies that need to be categorized in addition to the aforementioned books. An additional problem is that sorting between lists is all well and good in the javascript-enabled world, but I can't really think of a good fallback interface for, say, mobile browsers. Maybe a pseudo-listbox with radio buttons next to each item? The master list of items will in general be very long - over 100 items, certainly, possibly many more. Any given category will most likely contain one or two selected items, but the possibility exists for a category to have dozens of selected items, or zero selected items. As far as OS and stuff, the site is in classic asp (quit snickering!), the server-side code is VBScript, and so far we've avoided the various Javascript libraries by the simple expedient of almost never using client-side scripting. This one form for this one client is currently the big exception. Give 'em an inch and they want a mile... Oh, and I have to add: I suck at Javascript, or really at any C-descendant language. Curly braces give me hives. I'd really, really like something I can just copy & paste into my page, maybe tweak some variable names, and never look at it again. A girl can dream, can't she? :)

    Read the article

< Previous Page | 440 441 442 443 444 445 446 447 448 449 450 451  | Next Page >