Search Results

Search found 91854 results on 3675 pages for 'server hardware'.

Page 444/3675 | < Previous Page | 440 441 442 443 444 445 446 447 448 449 450 451  | Next Page >

  • Recovering data from a Silicon Image SiI3114 RAID

    - by Isaac Truett
    I have a set of 3 disks in RAID 5 originally created with a Silicon Image SiI3114 on-board RAID controller. The old motherboard is dead. The new motherboard (which has a different raid controller) won't boot from the array. I have no reason to believe that the drives are damaged or corrupted. I'm 99% sure that the problem is that the new controller isn't compatible or I'm not setting it up properly. Is it possible to recover data from the drives using a different controller? Would a PCI card like this one allow me to read from the array again?

    Read the article

  • Hard Drive problem: is it the SATA controller or the HDD itself?

    - by Drooling_Sheep
    I have a Samsung 1.5TB hard drive hooked up to an ECS H55H-I mini-ITX motherboard. I have XBMC 10 (modified Ubuntu 10.04) installed for use as an HTPC. The hard drive encounters occasional errors during normal use which cause it to be remounted read-only. I have updated the BIOS on the motherboard, changed the SATA cable and moved it to different ports on the motherboard, installed and re-installed the OS (including different versions of XBMC and generic ubuntu), all to no avail. I recently ran tests both with badblocks -sv and smartctl -t long. Both reported no errors. This makes me think the motherboard or SATA controller is probably the issue. Does anyone know of any further tests I can do to help narrow this down? The processor is a Core i3. I forget the model number but it's one of the 32nm ones with on-package graphics. There's no discrete video card or optical drive. The power supply is a 150W Rosewill (pretty sure) that came with the case.

    Read the article

  • Notebook display not working properly

    - by jfcfar
    I have an old Acer TM4001 notebook. If the laptop is powered-off, with the lid closed, when I power it on, it generally works. Then, without touching anything, if I reboot the computer the internal display wil not work anymore. To make it working again I need to shut down the pc, close and reopen the lid and then turn it on. If I close and reopen the lid if it is not working after power the pc on, it won't work. When the screen is working, closing and opening it has no effect (the data cable seems ok). The external monitor always works as expected: If the internal display is not detected, the external will be the main (and only) display. This is not OS-related. When the screen is not working I cannot see the POST. What could be the cause for this?

    Read the article

  • What is the best way to shutdown hard disk?

    - by Sunil
    Right Now I'm using hdparm command in unix to shut down the hard disk but there are few issues with it. when it wakes back up it consumes lots power. Is there any other way to do it? Many times when I put my hard disk to sleep, I can see few bursts at the beginning and then after a while it goes to sleep. I think its because of the journaling system in ubuntu (which I use) Have anybody encountered that? What would be the best linux/unix operating system (eg: ubuntu/centos/redhat) to work on extensive hard disk operations? I would highly appreciate if you could share the problems you encountered while doing this operation.

    Read the article

  • New mainboard for Shuttle

    - by Dave Arkell
    I have an old Shuttle barebones SN21G5 (AMD 64), and I really need a more modern chip in there. Is there a way of swapping out the old mainboard and putting in one of those new fangled phenom mainboards in there?

    Read the article

  • Which is the cheapest machine where I can run linux and plug in some webcams? (and with network inte

    - by marc.riera
    I'm looking for a very cheap machine to run a linux distro for security(anti-thief) software. I would like to be able to connect to the network and a couple of webcams. May be ip-webcams or usb-webcams. The idea is having a machine with batteryes, laptop style, but there is no need to have a display/monitor attatched all the time. I'm planning to spend no more than 200$, in case it also gets stolen. Any advice on what to buy? (all modifications to this security plan are welcome) Thanks.

    Read the article

  • Video adapter problem on new motherboard

    - by Dmitriy Matveev
    Something bad happened to my PC several days ago. I wasn't near my PC, so I have no idea about what happened it was just halted. When I tried to boot it was entering infinite loops of a few seconds power up (cpu, hdds, etc) and then power down. I've tried to boot the system with no additional components (that includes hdd, video, network adapters and even memory) connected and that didn't solved the problem, so I've made a decision that most likely it's either some a problem with power unit or with motherboard. I've tried to replace my power unit by another one (which was expected to be working) and the problem didn't resolved again. I've bought a new MB (ASUS P5KPL-AM SE) and tried to get it running with my old CPU and memory (I hope it's still alive). Since this MB include on-board video I've tried to run the PC without installation of mine video. The PC wasn't running and the BIOS was beeping one long signal following by two short (Does it means a video problem?). After that I've installed my video adapter to PCI-E slot and tried to boot the system again and the BIOS was beeping the same. I don't get it. I may expect some problem with CPU and/or memory since I don't know what happened to my PC (maybe some power failure or something different), but not with video and not with on-board video on newly bought MB. How can I understand what's wrong with my system now?

    Read the article

  • My PC suddenly reboots

    - by ChocoDeveloper
    Yesterday I opened my PC hub (after like, 5 years) to add more RAM and a new HDD. It was full of dust and balls of fluff, so I cleaned it a bit by blowing. I also removed the fan that was attached to the motherboard (I think it's there to cool the processor) and I cleaned it also by blowing and with a paintbrush, then put it back where it was (it had 4 weird plastic screws, it wasn't easy). Then I added 2 x 2Gib of RAM (Kingston 1333MHz), and the new HDD (Western Digital Caviar Blue 1TB SATA 3). I couldn't find another wire like the one my first disk had, which was thicker, but there was one that was more flat, so I plugged it and it worked fine (I also plugged the wire that I think is for the data, which looks like many little wires glued together). I'm running Ubuntu 12.04, and in the new disk I've just installed Windows 7. Between yesterday and today, two reboots ocurred while working on Ubuntu. I haven't used Windows 7 that much so I don't know if it will happen there too. So where can I begin to debug this?

    Read the article

  • What could cause a dual-monitor PC to suddenly stop using one of the screens?

    - by raldi
    I've got a dual-monitor setup using a GeForce 7900GT that was working fine for over a year... then suddenly, only one of the screens works. It's not OS-related, because even on startup, only one screen displays the BIOS checks. In the past, both screens would show it together. I didn't change anything to trigger this The monitor that gets a signal is random -- sometimes the one on the left goes black, sometimes the one on the right. The monitors and their cables are good -- I can switch both or either, and I get a signal just fine. They're plugged in, too. It's not the video card, either -- I have an identical 7900GT in another machine, and swapping the two didn't fix anything. It's not dust on the motherboard -- I pulled everything out, cleaned it off, checked for obvious damage, put it all back together, and no change. My next two steps are going to be to reset the CMOS info and to try swapping out the motherboard. Before I do that, does anyone have any other ideas?

    Read the article

  • What is the best SSD deal available right now ?

    - by paulgreg
    What is the best 2.5" SSD deal (best performance for a reasonable price and a good size) available right now ? The question is in 'community wiki' mode, so feel free to post the "winner" below : And the winner is... : currently the OCZ Vertex. Prices: * 30GB - $149.99 * 60GB - $239.99 * 120GB - $389.00 * 250GB - $829.00 Speed: * Read: up to 270MBps * Write: up to 210MBps

    Read the article

  • Asus V1S screen dimming randomly

    - by Bill
    I have an Asus V1V, which is the same as the Asus V1S except for the video card. I have a problem where the screen will randomly lose brightness or flicker between being lit and not lit. The picture below is of the left hinge, with the cover removed. Pressing one of these cables affects this behaviour, and pressing it in place will resolve the issue for a few hours. My guess means the inverter cable is damaged, based on previous experience. As the picture shows, there are two cables, an LCD cable and what I assume is an inverter cable. I purchased an LCD cable for my model of laptop, but have been unable to find an inverter cable. It seems not to exist. I would like some input on if an inverter cable actually exists, if it is likely the problem, or solutions in general to resolve this problem permanently.

    Read the article

  • Computer is dying--what should I be looking for?

    - by Will
    Okay, I'm a bit knowledgeable with pooters and such, but i'm confused. My computer is dying slowly, and I'm not sure what part is causing this. Computer details: Vista, dell machine, intel Q6600, 2.4 Core Duo (quad core), standard memory and drive (unknown manufacturer). Symptoms: I would best describe the symptoms as memory corruption. After a couple days on, I start getting applications crashing or failing to open for a lack of "resources". Sounds are corrupted. Onscreen text gets corrupted; the characters of text are garbled, not the pixels on the screen. Video memory seems untouched as I haven't seen any misplaced pixels. Recently I've lost files on disk. I've also experienced errors reporting a supposed lack of disk space, even though I have fifty gigs free. There was one point where I couldn't get to the POST when booting up. After I cleaned everything (see next) this hasn't happened. Diagnostic steps: First thing I did was clean the case. There was a lot of dust buildup on heatsinks, so I cleaned all that up. No help. Next, I disconnected and reconnected everything, from power cables to memory (did not reseat cpu). No change. Last, I ran the standard vista memory diagnostics and ran checkdisk. Both reported no errors found. I have not run any POST tests, now that I think about it. I'm at a loss at this point. Disk appears fine, memory too. I'd expect motherboard issues to result in the thing not booting up, yet it does every time. What should I be looking at? What more can I do?

    Read the article

  • Fixing bent pins on a CPU

    - by Pekka
    While replacing a mainboard in a desktop machine (see related question), I did something stupid. I inserted the CPU into the new mainboard, but didn't check for the right position. When it didn't immediately lock in, I pressed slightly before realizing what was wrong. The result was a number of bent pins. I tried every tutorial that popped up when Googling "CPU bent pins" - using credit cards, sewing needles, and a hunting knife to get the pins back into position - but to no avail: For every pin I get straightened out, two others are bent. I have no problem getting individual pins straightened out, but my many attempts have led to many pins being slightly askew - enough for the CPU not to fit into the socket (An AMD X3 one). Maybe I just lack the motoric finesse. What I would need is some sort of a grid to fix all pins at once. It's a €50 processor so the loss is not catastrophic. But I thought before I go buy a new one, I thought I'd check here whether anybody knows some magic trick, or a cheap generally-available tool to fix this.

    Read the article

  • How to securely control access to a backend key server?

    - by andy
    I need to securely encrypt data in my database so that if the database is dumped, hackers are unable to decrypt the data. I'm planning on creating a simple key server on a different machine, and allowing the DB server access to it (restricted by IP address on the key server to permit the DB server). The key server would contain the key required to encrypt/decrypt data. However, if a hacker were able to get a shell on the DB server, they could request the key from the key server and therefore decrypt the data in the database. How could I prevent this (assuming all firewalls are in place, DB is not connected directly to the internet, etc)? i.e. is there some method I could use that could secure a request from the DB server to the key server so that even if a hacker had a shell on the DB server they'd be unable to make those same requests? Signed requests from the DB server could make issuing these requests less trivial - I suppose that'd help increase the amount of time it'd take to compromise the key server, something a hacker probably wouldn't have much of. As far as I can see, if someone can get a shell on the DB server everything's lost anyway. This could be mitigated by using one key per data item in the DB so at least there's not a single "master" key, but multiple keys that the hacker would need to access. What would be a secure method of ensuring requests from the DB server to the key server were authentic and could be trusted?

    Read the article

  • Why does the heat production increase as the clockrate of a CPU increases?

    - by Nils
    This is probably a bit off-topic, but the whole multi-core debate got me thinking. It's much easier to produce two cores (in one package) then speeding up one core by a factor of two. Why exactly is this? I googled a bit, but found mostly very imprecise answers from over clocking boards which do not explain the underlying Physics. The voltage seems to have the most impact (quadratic), but do I need to run a CPU at higher voltage if I want a faster clock rate? Also I like to know why exactly (and how much) heat a semiconductor circuit produces when it runs at a certain clock speed.

    Read the article

  • Is there a USB 3.0 memory stick / thumb drive?

    - by jasondavis
    The new PC I just finished building has USB 3.0 support. I use a USB stick/thumb drive all the time on my PC for stuff, is there an equivalent available anywhere for USB 3.0? Please list one product per post, and provide a link to the manufacturer's product page. Also see the eSATA version of this question.

    Read the article

  • Low end dedicated GPU vs. integrated Intel graphics (for light CAD work)

    - by PaulJ
    I have been asked to spec a PC for an interior design business. They are going to do some AutoCAD work (but they won't be using massive datasets or anything), and also use Kitchen Draw, a program that has 3D visualization features and says, in its requirements, that "a recent NVidia or ATI card might be enough". Since they are very limited budget-wise, I had originally picked a GeForce GT 610 card, but this card is so low end that I'm left wondering whether it will be an improvement at all over the dedicated Intel HD2500 graphics chip that comes with the CPU (I will be using an Ivy-Bridge Intel i5). Most of the information I see around is for gaming, which isn't really relevant in my case. Basically, for the use case I've described (light 3D work), can one get away with a current Intel HD graphics chipset? And will a low end GPU like the GT 610 provide a noticeable improvement?

    Read the article

  • Which type of motherboard i should by and why?

    - by metal gear solid
    If budged is not matter. I just need best performance with less power consumption. I can purchase any cabinet , power supply and Motherboard. Is Power supply has any relation with Form factor? Is the size of motherboard and number of Slots only difference between all form factors? Is there any difference related to performance of motherboard? Is bigger in Size (ATX) motherboard always better?

    Read the article

  • Tool to test HDD for health?

    - by Ognjen
    I've had my HDD replaced, and now my computer is freezing every 1 to 5 minutes for 5 to 10 seconds. Actually, only active applications freeze (but it can be ANY application), usually when I click something, but sometimes by themselves. How can I check if this is HDD issue or software issue? I don't want to send my laptop for second HDD replacement right away, since the last service took 40 days, so I am looking for a tool that could confirm that this is a HDD issue.

    Read the article

< Previous Page | 440 441 442 443 444 445 446 447 448 449 450 451  | Next Page >