Search Results

Search found 21861 results on 875 pages for 'external library'.

Page 446/875 | < Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >

• Setting a Static IP Running FreeBSD8 in VirtualBox hosted on Windows 7

  - by gvkv

  I'm using VirtualBox on Windows 7 (host) to run a FreeBSD (guest) based web server. I`ve assigned a static ip of 192.168.80. 1 to the (virtualized) NIC which is run in bridged mode. The problem is that when I ping an external server (such as google.com) I get a No route to host error: dimetro# ping google.com PING google.com (66.249.90.104): 56 data bytes ping: sendto: No route to host ... I can ping the BSD server from both another virtualized machine and my host machine and from the server, I can ping everything on the network. The router ip is 192.168.1.1/16. ADDENDUM: I have the following lines in /etc/rc.conf on the BSD VM to configure networking: defaultrouter="192.168.1.1" ifconfig_em0="inet 192.168.80.1 netmask 255.255.0.0"

  Read the article

• How to safely remove a device blocked by the System process with a handle on \$Extend\$RmMetadata\$Txf

  - by Heinzi

  I have an external HDD which I would like to "safely remove". Unfortunately, my system (Windows 7 x64) complains that "the device is currently in use". Using Process Explorer I discovered which process is holding a handle on the device: Obviously, System is not a process that I can just kill and be done with it. I've done a bit of research and this seems to be a common problem, but no solution has been found so far (except for rebooting the machine, which I'd like to avoid if possible). Is there any solution to this problem that I've missed?

  Read the article

• Big IP F5 outbound HTTP issues

  - by mbuk2k

  We've tried upgrading from 9.x to 10.2 on our F5 Big IP 3400 and everything went over fine apart from one thing. We're unable to establish any outbound HTTP (80) connections from any servers that are assigned to a virtual server. This is something that worked before and is required for certain calls our servers need to make. Interestingly HTTPS (443) connections work fine, it's literally just anything outbound over port 80 seems to fail. Does anyone know if anything has changed between 9.4 and 10.2 that would mean additional config would need to be made to allow for external HTTP connections? Any advice would be appreciated, thank you

  Read the article

• Hosted Kerio Mailserver vs. Hosted Exchange

  - by Dayton Brown

  Hi all, I'm in the beginning stages of migrating from an internal exchange server (2003) to external hosted services. We don't have a huge user base, less than 100, but we need to support BlackBerries, iPhones, Outlook RPC/HTTP, etc. I really like exchange hosted providers (I've used intermedia in the past) but pricing is a bit high. Does anyone have any experience with Kerio? It looks great, but I'd like to hear some unbiased opinions. Or biased if you are really happy working for a particular hosting company ;-)

  Read the article

• How difficult is it to setup a mailserver?

  - by Jacob R

  I want a secure mail solution, as I am looking to move away from Google and other parties looking into my private data. How much of a PITA is it to setup my own mailserver? Should I go for an external provider with a good privacy policy and encrypted data instead? I have a VPS running Debian (with a dedicated IP + reverse DNS), and I'm a fairly capable Linux administrator, having setup a couple of webservers, home networks, and looking over the shoulder of sysadmins at work. The security I currently have on the VPS is limited to iptables and installing/running the bare minimum of what I need (currently basically irssi and lighttpd). When setting up a mail server, is there a lot of stuff to take into consideration? Will my outgoing mail be marked as spam on other servers if I don't implement a number of solutions? Will reliable spam filtering be difficult to setup? Can I easily encrypt the stored mail?

  Read the article

• How to setup a simple self-hosted dynamic DNS server

  - by Cerin

  I have a small internal network of physical machines running hypervisors, which in turn run several KVM Ubuntu virtual machines. How would I setup an internal dynamic DNS server so that when I run a script to create a new virtual machine, that VM could automatically register itself in the DNS server? Bind seems to be the standard DNS server for Linux, but it seems designed for a much more "static" DNS model. Dynamically updating this would require a complicated script that would have to SSH into the DNS server, edit configuration files, and then restart the server. This doesn't seem like a very elegant solution. Are there better options? I saw a similar question, although they're asking for a solution for a public setting on Amazon. My servers are entirely private, and I don't want to rely on an external VM host or Dynamic DNS provider.

  Read the article

• How to make security group in one forest show up in another forest?

  - by Jake

  I have two Win2k8 forests which I do maintenance on. The two forests have full 2 way external, non transitive trust with each other. I have a folder in forest X, domain countryX.mycompany.com accessible ONLY by the global security group named $group. In forest Y, domain countryY.mycompany.com, countryY\user1, countryY\user2 etc needs to have access to the folder. The natural instinct is to put user1, user2 etc into the $group. However, none of the methods for adding user to group works as it appears that the AD cannot find the groups in the other forest. Question: 1.How to make forests see each other's security groups and be able to add? 2.In practice, what is the recommended way to achieve the user access to the folders/files in another forest?

  Read the article

• Robocopying DLLs and EXEs

  - by BinaryDeuce

  I've used Robocopy for several years now for backup purposes, and never looked back at any backup application I used in the past. I replicate whole valued directories to a removable HD, than from this HD to and equivalent system. Over time, quite a few DLL and EXE have accumulated in these directories, none of which Robocopy can seem to copy to my external HD. Thus, my 2 computers drift apart slowly... Is there anyway, using one of the eigthy-nine (89) switches (or one of the 2^89 - 1 = 6,1897002 × 10^26 combinations thereof) to force Robocopy to robotically copy EXEs, DLLs and other of my "access is denied" friends? Thanks

  Read the article

• Getting rid of Plesk on a VPS

  - by TomA

  I've been using a relatively expensive VPS for hosting about 30 domains and I want to migrate to a cheaper one, without Plesk. Both use CentOS. My users will not care, they don't use Plesk anyway. But I will not be able to use it for creating new virtual hosts, FTP accounts etc. I'm not a commandline guru, esp. not in a server environment. Is there a free Plesk alternative for these purposes? I need to: Create a new virtual host with it's own FTP account Setup some basic FTP quota I don't need: DNS management (the new VPS service has an external DNS management GUI) Mail server management (I use Google Apps) Any suggestions welcome, from Plesk alternatives to "RTFM" or links to tutorials.

  Read the article

• VMWare Workstation Performance

  - by tekiegreg

  Hi there, awhile ago I upgraded my laptop to Windows 7 x64 from Windows XP 32 bit edition. However not before virtualizing the physical installation and I continue to run it under VMWare Workstation today. The performance on the resulting VM is just absolutely atrocious! I've done a lot of uninstalling stuff that's not longer needed since the machine is virtual in an effort to reduce RAM, but in general the responsiveness seems sluggish. I also run the Virtual Machine on it's own separate HD that is seldom used by the host OS. I'm just hoping for some general tips in increasing VMWare performance anywhere, thoughts? EDIT: Both of the below answers were excellent starting points for me. However I did like the selected answer's strategies on disk management. I am running the Virtual Machine in a separate external hard disk, likely I'm going to have to reconfigure somehow. Thanks all!

  Read the article

• Site to Site VPN with ISA 2006 to a Dyndns Hostname?

  - by Klaus

  Hi all, i would like to create a site-to-site VPN between my ISA 2006 and a DLink router on the other side. My ISA got a fixed external IP Address, but the Dlink only has a dynamic one. So it makes use of DynDNS. Every "cheap router" supports making VPNs to a hostname. But in ISA 2006 I have to enter a IP Address in the VPN settings. Is there any way to create the VPN connection to a Hostname? Thank you for answers! Kind regards, Klaus

  Read the article

• How to speed up rsync?

  - by Jakobud

  I'm running rsync to sync a directory onto my external USB HDD. It's about 150 gigs of data. 50000+ files I would guess. It's running it's first sync at the moment, but its copying files at a rate of only 1-5 MB/s. That seems incredibly slow for a USB 2.0 enclosure. There are no other transfers happening on the drive either. Here are the options I used: rsync -avz --progress /mysourcefolder /mytargetfolder I'm running Ubuntu Server 9.10.

  Read the article

• Cannot see http (apache) server outside home network

  - by user165155

  Ive been racking my brain with this all evening. Power went out with a tstorm today, started back up my server... running apache and a team speak server on it. TS is great, cant see my web page outside my network! Firewall is disabled on the pc running it (centos btw), apache is running and working. correct ports are forwarded on my router (my isp blocks port 80). Ive tried changing ports, pretty much everything i can think of. httpd.conf is pointing to the correct addy and port, and my domain is pointing to the correct external ip. Im at a loss, any ideas out there?

  Read the article

• Open Port on Windows Server 2008

  - by user1827348

  I have an external server and I installed a new Service on it. The service is running and I can access it locally. When I tried to get access to it locally, all worked just fine. but when I try to reach it from my laptop over the internet, I get the message, that the port is blocked. I added a rule to the windows firewall that all connections to that port are allowed but it still doesnt work. there is so many things in google that didnt help me, thats why I am asking specifically. I do acutally not know how to google for that right because i am not that into server configs and so on. Can anybody help me, what I have to do, to be able to access that port? From outside.

  Read the article

• Multiple WAN interfaces in same subnet on Sonicwall NSA220?

  - by Ttamsen

  (eta salutation, which keeps getting eaten.) Hi, all. I see a bunch of related questions, so I'm hesitant to ask, but: I have a situation where I have a Sonicwall NSA220 serving as firewall/router for two internal subnets to two external WAN connections. In some locations this is two separate ISPs. In others, it's the same ISP but with multiple circuits. The problem is that one ISP has been unable to provide unique subnets for each WAN interface. Is there any possibility that I might be able to bond the two WAN interfaces into a single virtual interface, and then use source-routing to get internal subnets communicating out the appropriate physical interface? Or even just use traffic-shaping to give each internal network appropriate shared bandwidth? I haven't found anything in the docs, but it seemed like it might be worth asking. Thanks for any help! -Steve.

  Read the article

• PSQL 64bit driver error

  - by Alex Holsgrove

  I have an Ubuntu 12.04 64bit server setup under Hyper-V. I have installed Pervasive 64bit SQL drivers so that a stock-updater script can run daily (Updates external MySQL database from another local server running Exchequer software / PSQL database). These drivers seem to conflict, as I found out when trying to run any apt-get commands: apt-get update apt-get: /usr/local/psql/lib64/libstdc++.so.6: version `GLIBCXX_3.4.9' not found (required by apt-get) apt-get: /usr/local/psql/lib64/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required by apt-get) apt-get: /usr/local/psql/lib64/libstdc++.so.6: version `GLIBCXX_3.4.11' not found (required by apt-get) apt-get: /usr/local/psql/lib64/libstdc++.so.6: version `GLIBCXX_3.4.11' not found (required by /usr/lib/x86_64-linux-gnu/libapt-pkg.so.4.12) apt-get: /usr/local/psql/lib64/libstdc++.so.6: version `GLIBCXX_3.4.9' not found (required by /usr/lib/x86_64-linux-gnu/libapt-pkg.so.4.12) apt-get: /usr/local/psql/lib64/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required by /usr/lib/x86_64-linux-gnu/libapt-pkg.so.4.12) Any help would be great.

  Read the article

• QNAP ftp: hide Mac OSX hidden files .DS_Store and others

  - by tobia.zanarella

  I am using a QNAP as an FTP server. Users access this NAS from their Mac OSX Lion clients and put files and folders inside the QNAP shares, which are later being accessed via FTP from external points. The problem is that inside the folders uploaded to the QNAP folders Mac OS leaves its .DS_Store and .* hidden files. I know that for a Samba share, for example, I need to add two lines to the /etc/samba/smb.conf file: veto files = /._*/.DS_Store/ delete veto files = yes But what can I do on a QNAP FTP service? Thank you.

  Read the article

• Mysql table Crashed during Optimize, table repair taking too long

  - by hellohellosharp

  One of my vital tables was being optimzied and MySQL crashed in the middle of it. It then said the table was corrupt. I am running repair but it is taking over an hour, I need this table up ASAP (I will even truncate it if necessary). Please help me get this solved. The table has about 54 million rows. This is a MyISAM. Any additional information needed, just ask. Here are the contents of my my.cnf: [mysqld] max_connections = 850 max_user_connections = 850 query_cache_size = 128M skip-external-locking key_buffer_size = 64M max_allowed_packet = 8M table_open_cache = 256 sort_buffer_size = 4M net_buffer_length = 16K read_buffer_size = 1M read_rnd_buffer_size = 1M myisam_sort_buffer_size = 32M innodb_file_per_table tmp_table_size = 100M max_heap_table_size = 64M thread_cache_size = 8 wait_timeout=25 interactive_timeout=25 table_cache=600 innodb_buffer_pool_size = 4G innodb_thread_concurrency = 8 innodb_flush_method = O_DIRECT # This setting allows the use of asynchronous I/O in InnoDB. # The following files track usage of this resource: # - /proc/sys/fs/aio-max-nr # - /proc/sys/fs/aio-nr # Default limit is 65536, of which a single instance of mysql uses 2661 out of the box innodb_use_native_aio = 1

  Read the article

• USB 3.0 not functioning fully

  - by Simon Sheehan

  After installing GNU/Linux today onto my Lenovo Y570 laptop, I ran into an issue quickly - the USB 3.0 support. 2/3 of my USB ports are 3.0 so I kind of need them. The ports are powered at the very least - my phone is charging from one, however, plugging in external drives, USB drives, or even a mouse gives no response. The drives spin up, etc, but they do nothing more than that. So there is power, but no information flowing to them. What am I missing here? What can I try to enable to make things work?

  Read the article

• Short USB cables not charging?

  - by tropolite

  I find this a strange problem but I can't find anything online about it. Recently I purchased a few short USB cables (20-30cm), to use in my car's USB connector to charge my phone. Strangely an older longer USB cable (1.2m), charges the phone fine (and the icon changes to show charging). With any of the short cables in the same USB slot no charging happens. Both the long and the short cables are USB2 compatible. I naturally assumed the short cables were faulty but connecting them to a PC or connecting to a high capacity external battery charging is successful using all the short cables and longer cables. Hopefully someone here is able to give me an explanation of the problem and how I can overcome this and use a short cable where it is most appropriate. Thanks

  Read the article

• Mac OS X: pushing all traffic through a VMWare VM [closed]

  - by bj99

  I want to set up an Astaro (Sophos) UTM in a Virtual Machine. The Setup should be at the end the following: Cable Modem (one IP adress) | [Ethernet] Sophos UTM (running as VM [VMWare Fusion 5] on the MacMini) | [WIFI] Airport Express v2 (for sharing Local Network to wireless and wired clients) 1)| [WIFI] 2)| [Ethernet over Thunderbolt Ethernet Adapter]* Clients MacMini (Local File Server) *To have the Mini also protected behind the UTM So the setup process for the UTM works fine, but then the problems start: I just have one external IP (from my cable modem provider)== So if I put the VM in briged mode my Internet connection drops, because the MacMini also has its IP adress. If I put the VM to NAT mode the Mini itself is not protected by the UTM So: is there a way to hide the en0 interface(Ethernet) and the en1 interface (Wifi) from the MacMini, so that they not even appear in System Preferences Network section but are available to the VM? That way the Mini must connect to the en2 interface (Thunderbolt adapter) to make any Internet/LAN connection and I just use the given single IP from the Cable Modem. Thaks for any suggestions... Sebastian

  Read the article

• Puppet nodes cant' find master, ec2 public versus internal ip addresses and hosts files

  - by Blankman

  If I setup my hosts files such that they reference all other ec2 nodes using the internal ip addresses, will this work or do I have to use the external ip addresses? Do I need to specify anything in my security group to get internal ip addresses to work? e.g. /etc/hosts ip-10-11-12-13.internal some_node_name If I do this, can I reference some_node_name anywhere in my scripts where I would have used the ip address previously? On my puppet agent servers, I have a reference to my puppet master like: public-ip-here puppet When I reboot my puppet agent's, syslog shows they couldn't find the master with the message: getaddinfo : name or service not known I did get it to work by updating /etc/default/puppet and I added to the options: --server=public-ip-here From what I read, puppet will by default try using 'puppet', and I set this in my hosts file so why wouldn't it be picking this up?

  Read the article

• FortiGate firewall configuration with /30 and /28 networks

  - by slyderc

  I have fiber coming in from a new ISP which is being handed off via Ethernet on a single physical port. I'm having doubts about how to approach the configuration on my FortiGate 200A firewall because I've been given a /30 containing the ISP's gateway and another /28 for external IPs I can use: x.y.76.12/30 (.13 is the GW) x.y.76.64/28 (public IP space) How do I configure the FG200A's WAN1 interface to be aware of the two networks? As I only have one physical ISP port, will I need to plug it into a switch to break-out two cables and use a DMZ port on the FG200A for setting up the /28? Thanks in advance for your insight!

  Read the article

• Wildcard SSL Certificates with Exchange 2010?

  - by Hutch

  Is anyone using a Wildcard Cert with Exchange 2010 please? We currently have a bunch of individual whatever.domain.com SSL certificates and as several are expiring soon it would be an ideal opportunity to move to a wildcard certificate. At some point though we will be moving from Exchange 2003 to Exchange 2010, and I've read conflicting reports over whether wildcard certs work with Exchange 2010 as many guides seem to recommend a UCC/SAN certificate. Our internal DNS domain name is the same as our external domain name. Godaddy look like good VFM given they allow use on unlimited physical servers. Thanks in advance.

  Read the article

• How can I stop new Command Prompt windows spawned by another program from covering my foreground win

  - by Chris W. Rea

  Under Windows 7 x64, when I'm ripping CDs with Exact Audio Copy, it spawns a Command Prompt window each time it invokes the external MP3 compression program I use, LAME. While that's going on, I usually like to surf the web. However, I find it quite annoying that even when Firefox has the foreground, the Command Prompt windows spawned by EAC are coming up in the foreground, on top of my Firefox window. Is there a way to make those new Command Prompt windows spawn in the background? Alternatively, is there a way to make the current active window stay in the foreground / on top while I'm using it?

  Read the article

< Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >