Search Results

Search found 74454 results on 2979 pages for 'hardware problem'.

Page 447/2979 | < Previous Page | 443 444 445 446 447 448 449 450 451 452 453 454  | Next Page >

• crippling repeating "pciehp card not present" notifications

  - by Nanne

  When using ubuntu (12.04, both installed and on a live usb) I get a lot of these messages: pciehp 0000:00:1c.5:pcie04: Card not present on Slot(37) pciehp 0000:00:1c.5:pcie04: Card present on Slot(37) And with a lot I mean about 20 per second. This has a crippling effect, and I would like to get rid of it :) The computer is a packard bell easynote BG48-U-100 DC. I tip I picked up from some fedora/redhat error here was to look at lspci -vnn. I have pasted the part about "00:1c.5" here: http://pastebin.com/0sfsiqW2 For what good it may do, here is the lsmod of my machine: http://pastebin.com/DQZy1kAL From that first pastebin I think to conclude that it has to do with the module shpchp, which seems to me (aka: google) to have something to do with ACPI. That's as far as I've come in disecting this. Can anyone help me along further? What can I do, check etc? I did see this topic but my intentions are not to surpress the error message: I know how to do this (from that topic ;) ), but I'm looking for a real sollution. Finding the problem on the internet does suspect me to believe it is neither an ubuntu specific nor a packard-bell specific problem.If you google the problem it seems that is present on several other distribution/hardware combo's as well, and it looks like the advice is to remove one of the drivers? I have no clue as to which driver I should look at and and what would be the effect of just removing it. I have seen this topic which is old-ish, but describes my problem and is about a similar computer. The solution in this topic was to compile a new kernel using a spanish guide, which seems a bit extreme to me, so I'm kinda hoping for a better solution than that.

  Read the article

• Calculating up-vector to avoid gimbal lock using euler angles

  - by jessejuicer

  I wish to orbit a camera around a sphere, yet the problem is that when the camera rotates so that it is at the north pole (and pointing down) or the south pole (and pointing up) of the sphere the camera doesn't handle itself very well. It spins rapidly until arriving 180 degrees in the opposite direction. I believe this is known as gimbal lock. I understand you can avoid this problem using quaternions. But I also read in another forum that it's possible to avoid this easily using euler angles as well. Which I would prefer to do. It was said that all you need to do is "calculate a proper up-vector every frame, and that avoids the problem entirely." Well, I tried aligning the up-vector with the vertical axis of the camera whenever the camera changed orientation, but this didn't seem to work. Meaning that the up-vector followed exactly the orientation of the camera's y-axis (or it's up vector), instead of using a constant up-vector aligned to the up-vector of the world (0, 1, 0). How exactly do I go about calculating a proper up-vector as my camera orientation changes to avoid the gimbal lock problem mentioned above?

  Read the article

• Why does 301 redirect work for http but not for https?

  - by Tom G

  Through my domain registrar I have set up a domain, essayme.co.uk, to automatically forward to https://google.com. If I go to http://essayme.co.uk it works as expected and redirects me to https://google.com. $curl -i http://essayme.co.uk HTTP/1.1 301 Moved Permanently Cache-Control: max-age=900 Content-Type: text/html Location: https://google.com Server: Microsoft-IIS/7.5 X-AspNet-Version: 4.0.30319 X-Powered-By: ASP.NET Date: Sat, 07 Jun 2014 11:14:16 GMT Content-Length: 0 Age: 0 Connection: keep-alive However, if I go to https://essayme.co.uk it just freezes and times out. $curl -i https://essayme.co.uk curl: (7) Failed connect to essayme.co.uk:443; Operation timed out What is happening in the second case? (and, if possible, how can I get the redirect to work for https?) Problem background/clarification: I don't have an SSL certificate for the essayme.co.uk domain above, but I do for my live domain (let's call it mywebsite.com), and I was seeing the exact same problem on this domain (hence why I'm trying to debug the problem). Unfortunately I can't experiment with the live domain (as it's live) and I would like to avoid having to buy a second certificate for essayme.co.uk just for debugging (unless absolutely necessary). The problem I was seeing: my live domain, mywebsite.com (not its real name), has a valid SSL certificate. Visiting https://www.mywebsite.com displayed the webpage as expected. I had set up forwarding (like in the question above) from the naked domain (mywebsite.com) to https://www.mywebsite.com) Visiting http://mywebsite.com redirected to https://www.mywebsite.com as expected. However, visiting https://mywebsite.com would freeze and time out (as in the question above). I also tried forwarding it to http://www.otherwebsite.com as an experiment (i.e. forwarding to another site that does not use SSL), but the result was the same: Visiting http://mywebsite.com redirected to http://www.otherwebsite.com as expected. Visiting https://mywebsite.com would freeze and time out again. So I set up essayme.co.uk as an experiment to try and understand why it doesn't work.

  Read the article

• Importing tab delimited file into array in Visual Basic 2013 [migrated]

  - by JaceG

  I am needing to import a tab delimited text file that has 11 columns and an unknown number of rows (always minimum 3 rows). I would like to import this text file as an array and be able to call data from it as needed, throughout my project. And then, to make things more difficult, I need to replace items in the array, and even add more rows to it as the project goes on (all at runtime). Hopefully someone can suggest code corrections or useful methods. I'm hoping to use something like the array style sMyStrings(3,2), which I believe would be the easiest way to control my data. Any help is gladly appreciated, and worthy of a slab of beer. Here's the coding I have so far: Imports System.IO Imports Microsoft.VisualBasic.FileIO Public Class Main Dim strReadLine As String Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Dim sReader As IO.StreamReader = Nothing Dim sRawString As String = Nothing Dim sMyStrings() As String = Nothing Dim intCount As Integer = -1 Dim intFullLoop As Integer = 0 If IO.File.Exists("C:\MyProject\Hardware.txt") Then ' Make sure the file exists sReader = New IO.StreamReader("C:\MyProject\Hardware.txt") Else MsgBox("File doesn't exist.", MsgBoxStyle.Critical, "Error") End End If Do While sReader.Peek >= 0 ' Make sure you can read beyond the current position sRawString = sReader.ReadLine() ' Read the current line sMyStrings = sRawString.Split(New Char() {Chr(9)}) ' Separate values and store in a string array For Each s As String In sMyStrings ' Loop through the string array intCount = intCount + 1 ' Increment If TextBox1.Text <> "" Then TextBox1.Text = TextBox1.Text & vbCrLf ' Add line feed TextBox1.Text = TextBox1.Text & s ' Add line to debug textbox If intFullLoop > 14 And intCount > -1 And CBool((intCount - 0) / 11 Mod 0) Then cmbSelectHinge.Items.Add(sMyStrings(intCount)) End If Next intCount = -1 intFullLoop = intFullLoop + 1 Loop End Sub

  Read the article

• Force startx to run X in a specific resolution and refresh Rate

  - by Z9iT

  From my past experience (using Win-Xp), this particular monitor works only on 60Hz , Best resolution being 1024x768. I have "installed and configured" Ubuntu 12.04 Minimal (on USB stick) so that most of the time terminal is used, however, whenever there is a need to enter GUI, I may issue startx command to go into gnome. However the problem is that on this particular system, issuing this command poses problem because its default refresh rate won't synchronize with the monitor. The display keep on flickering and utterly unreadable. It is visible that gnome has been loaded and default wallpaper and desktop items are visible. But the problem is due to refresh rate different than 60Hz. I am looking for a command attribute to startx command which will force the refresh rate to 60Hz and resolution preferably to 1204x768 I can open terminals with Ctrl+Alt+T and enter commands. Key combinations like Ctrl+Alt+NumPlus works flawlessly in distributions like solaris, but it's not working for me. Also the commands like xrandr -r 60 60 being refresh rate wont work. The same problem is faced even when I boot from a live CD

  Read the article

• How do I require use of the 5 GHz band when connecting to a Wireless N access point?

  - by cqcallaw

  What is says in the topic: there's a Wireless N access point to which I'd like to connect using the 5 GHz band exclusively. How does one accomplish this? Using the directive band=a in the connection configuration file in /etc/NetworkManager/system-connections doesn't seem to affect anything (/var/log/syslog still shows attempts by wpa_supplicant to connect using the 2.4 GHz band), and running iwconfig wlan0 freq 5G per this question results in the following error: Error for wireless request "Set Frequency" (8B04) : SET failed on device wlan0 ; Invalid argument. [Edit] I'm hoping the answer won't depend on the hardware in use, but here's some information about the hardware, just in case: System is an Asus ZenBook Prime UX31A-DB51, running Ubuntu 12.04. lspci output: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:04.0 Signal processing controller: Intel Corporation Device 0153 (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 00:1f.6 Signal processing controller: Intel Corporation Panther Point Thermal Management Controller (rev 04) 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) The driver for the wireless interface is iwlwifi.

  Read the article

• Is Oracle Database Appliance (ODA) A Best Kept Secret?

  - by Ravi.Sharma

  There is something about Oracle Database Appliance that underscores the tremendous value customers see in the product. Repeat purchases. When you buy “one” of something and come back to buy another, it confirms that the product met your expectations, you found good value in it, and perhaps you will continue to use it. But when you buy “one” and come back to buy many more on your very next purchase, it tells something else. It tells that you truly believe that you have found the best value out there. That you are convinced! That you are sold on the great idea and have discovered a product that far exceeds your expectations and delivers tremendous value! Many Oracle Database Appliance customers are such larger-volume-repeat-buyers. It is no surprise, that the product has a deeper penetration in many accounts where a customer made an initial purchase. The value proposition of Oracle Database Appliance is undeniably strong and extremely compelling. This is especially true for customers who are simply upgrading or “refreshing” their hardware (and reusing software licenses). For them, the ability to acquire world class, highly available database hardware along with leading edge management software and all of the automation is absolutely a steal. One customer DBA recently said, “Oracle Database Appliance is the best investment our company has ever made”. Such extreme statements do not come out of thin air. You have to experience it to believe it. Oracle Database Appliance is a low cost product. Not many sales managers may be knocking on your doors to sell it. But the great value it delivers to small and mid-size businesses and database implementations should not be underestimated. 

  Read the article

• Install Mac OS Lion on Macbook with existing Ubuntu 12.04 dual boot

  - by kash

  I don't usually create my own questions, because I can find what I need through other people's questions. However, this one doesn't seem to be anywhere, except in one place where someone is talking about not using Apple hardware. So here it goes. I am using Apple hardware. I have a MacBook 1,1 with Intel Core2Duo running Ubuntu Precise Pangolin flawlessly. I never considered starting with Mac OSx and dual-booting because I never liked Mac OS. Now that I'm realizing that the only way I'm going to be able to run my DAW (Reaper) nicely and use a Firewire recording interface is to run Mac OSx, I'm considering it again. I want to go the opposite direction of most people and install Mac OSx next to an existing Ubuntu installation and have a boot menu with refit. I've installed refit in Ubuntu and I've converted the .dmg file for Mac OS Lion to a .iso file. Now, should I mount the .iso in Ubuntu and run it there, or burn a DVD and restart? I'm trying to gauge how to do this without hurting my existing Ubuntu installation. I will of course keep looking for existing answers in the meantime.

  Read the article

• USB and CD data cannot be read or mounted in 12.10

  - by aravind4j

  I'm using Ubuntu 12.10. I wrote a data disk using Brasero Disk Burner, but the system cannot read the CD. I tried to write the same data into my HP v220w pen drive but now there is an error in that too. It shows the following: Error mounting /dev/sdb at /media/aravind4j/Aravind4j: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdb" "/media/aravind4j/Aravind4j"' exited with non-zero exit status 13: $MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. (udisks-error-quark, 0) I used a NTFS file system for the pen drive as you can recognize from the above statement. I would like to recover the files so please help me recover the files without formatting the drive.

  Read the article

• opengl libraries for ubuntu running on Virtual Box

  - by vboxuser

  I am having Ubuntu 10.04 running on VirtualBox. Guest additions are installed successfully. But Guest additions do not provide the OpenGL library. To run open GL demo what needs to be installed. Some google links suggest Mesa utils. By my understanding is Mesa utils do not use vbox drivers to achieve hardware acceleration. Ubuntu 10.04 is running on VirtualBox and not on bare metal. The host comprise of Zx400 CPU with nvidia graphics driver. But this is not relevant since I would be using the vbox drivers provided by guest additions on VirtualBox. In this scenario how do I get OpenGL libraries on Ubuntu?. (Specially I am looking for solution other than Mesa, since mesa has support only for VMware and not for VirtualBox) How to get Opengl libraries which use vbox drivers for 3D hardware accleration?? As i already mentioned, ubuntu 10.04 is running on VirtualBox and not on bare metal. the host comprise of Zx400 CPU with nvidia graphics driver. but this is not relevant since i would be using the vbox drivers provided by guest additions on VirtualBox. In this scenario how to i get OpenGL libraries on Ubuntu. (Especially i am looking for solution other than Mesa, since mesa has support only for VMware and not for VirtualBox Thank you

  Read the article

• Update usb Driver

  - by Enrico Caponi

  i just now start to use Xubuntu, and i install Xubuntu on my second laptop i had in my garage, just for put back in use. On the ASUS xubuntu work really perfect but now after i put on my old laptop i have some little proble. My Laptop old is a Fujitsu Siemens AMILO L7310GW, i explain my problem: The installation works fine, everything is quite good but there are few little problem i have a know idea, how I can fix them... so USB: i have a optical mouse usb and works quite strage, when i tip on terminal "lsusb" the system recognized fine my mouse but the strange thing is the mouse it move like jump around the desktop. what i had done: - update the usbdrive - change mouse - tried mouse on different pc and on both they work fine another problem i don't know where came from: when i take off my mouse, and try to put back doesn't work at all, if i want back i have to restart the OS. and no usb pen or other ar working so for that i think is usb problem. i can tell before Xubuntu whit winXP the usb work fine, but i don't want windows anymore... So i tried almost everything you can find on the net, maybe i have done something wrong so please help me. I tried also to install the new version 12.04, but i came back for the 11.10.

  Read the article

• Arrow ECS Oracle OpenWorld update

  - by mseika

  A date to mark in your diaries now! On Tuesday 23rd October will be holding our post Oracle OpenWorld Oracle. Covering all the important announcements from Oracle OpenWorld, this must attend event will be held in the Royal Exchange, London. The full agenda and speaker line up is being finalised but we will cover all the major strategy and product announcements from Oracle OpenWorld, FY 13 Channel Strategy and Partnering with Arrow ECS. Oracle OpenWorld a Channel Perspective, David Tweddle - Head of UK Alliance and Channel Hardware Announcements, Christopher Lindsay - Oracle Hardware EMEA Software Announcements, speaker to be confirmed Arrow ECS Focus and Strategy, Simon Rushbrook - Business Development Manager, Arrow ECS Summary and close, Nick Tinsley - Sales Director Who should attend? The event is subject Oracle NDA and is aimed at sales and pre-sales personal within your organisation. This event will commence at 12.30 with lunch, presentations will start at 1.30 and will close at 4.30 followed by drinks and networking. Full details to follow shortly but save the date and register now. Date & Time Tuesday 23rd October 201212.30pm - 4.30pm Post event drinks will be servedfrom 4.30pm Location London OfficeEntrance 2, Fourth Floor,The Royal Exchange,London, EC3V 3LN Click here for directions >

  Read the article

• Frustrated with MythTV 0.26

  - by Mike

  I've been using MythTV for a while now. Until a hardware crash I had a 0.25 box running without problems. Had to get new hardware and am now in the process of setting up 0.26. Every time I pick a menu option, it hangs for 1 minute. Every time I try to start the backend, same thing. I pick a new theme in the frontend, but it never gets used. I try to test audio, but all I get is static (from the proper channels though). I've setup the storage groups in the backend and put a video in /storage/videos but the front end won't see it when I scan for changes. I make changes in the front end configuration and they don't get saved (or get lost randomly 2-3 reloads later). Obviously there is something I am doing catastrophically wrong, but I have no idea what. Are the storage groups not working yet? Maybe I need to delete all the storage group entries and just use the front end override to set the path? I'm currently using lvm across 3 hard disks, and this has worked well for me in the past. I'd like to use storage groups, but frankly I don't see them working yet at all - especially not for videos (which is what we watch 99% of the time). Anyone have any suggestions for me to try before I just call 0.26 bad names and wipe the system?

  Read the article

• Network connection fails when downloading data

  - by Guus

  In the past few weeks, I've noticed my network connection becoming unstable while downloading files. I'm not sure how to diagnose this issue. I've found that my network connections appear to be temporarily unresponsive (for periods up to a minute or so) while I'm downloading a file (that's large enough to not be downloaded instantly). The problem occurs when downloading data through a webbrowser, but also when using SCP to download data from a remote location. During the period in which network connections are unresponsive, every resource that I try to access over the network is unavailable. This includes: The download itself (SCP reports a 'stalled' download) Web pages (won't load - browsers report 'resource unavailable') SSH sessions (CLI freezes) VPN connections (connections terminate) IM client connections (client starts reconnection attempts) ... (everything is pretty much dead) I've noticed that during such a period, I cannot even access the (web-based) administrative console of the router on my LAN at home (although it remains reachable for other devices). The problem occurs when connected to my home network, but also when I'm in the office. Other devices than my laptop are not affected. Given the above two characteristics I assume the problem cause lies within my laptop, not the network infrastructure. I'm running Ubuntu 11.10. Apart from applying automatic updates from Ubuntu, I can't think of a change that I applied to the OS that could have started the problems. I'm absolutely positive that this issue did not occur up to a few weeks ago (as it's very noticeable, and only started to annoy me in the last few days). When the problem occurs, applications that make use of a network connection fail visibly (I get popups telling me that a VPN connection is broken, for instance). The network manager does not report any issues related to my wifi-connection though. Help?

  Read the article

• Cleaning Up After Chrome

  - by Mark Treadwell

  I find Google Chrome, which I have no interest in, is continually getting installed on machines in my house, mostly due to Adobe Shockwave bringing it along as an install package. (Family members are agreeing to the download, not realizing the Chrome is getting dropped as well.) My major issue after uninstalling Chrome is that you can no longer click on links in Outlook emails. There is a lot on the web about this, and Google has not been proactive at fixing their uninstaller. I have now added a registry file to my Win64 systems to reset the problem registry keys and clear the error. This registry file is pretty simple. It merely resets HKEY_CURRENT_USER\Software\Classes\.htm, HKEY_CURRENT_USER\Software\Classes\.html, and HKEY_CURRENT_USER\Software\Classes\.shtml back to their default values of "htmlfile". Chrome takes over the handling of these file extensions because its default install is to make itself the default web browser. The Chrome uninstalled fails to clear/reset them. In troubleshooting this, I looked in my registry based on the web info on the Chrome uninstall problem. Since my system had never had Chrome installed, my registry did not have the problem keys. To troubleshoot, I installed (ugh!) and uninstalled Chrome. Sure enough, Chrome left the expected debris with a value string of "ChromeHTML.PR2EPLWMBQZK3BY7Z2BFBMFERU" or something similar. Resetting these values fixed the problem. I see that Chrome leaves quite a bit of debris behind in the registry. I guess it is creating the keys then leaving them behind, even though their presence (with bad data) subsequently affects operations.

  Read the article

• How do I rescue files from the encrypted home folder via live USB stick?

  - by Alexia

  I know, this has been asked and answered all over the internet already. However, I start feeling stupid, since the informations there are not helping me. Just this morning, I wanted to install the newest update to 13.10. After the download, when it came to the actual installing, the install program froze and didn't do anything for hours. At that time, I was still logged in. The computer was working and everything was accessable to me. However, I made the mistake and didn't immediately make safety copies of everything. Instead, I just rebooted. Long story short: My computer even fails to reset to a previous version via Grub. But I am able to boot from a USB stick and, after starting Nautilus, I see my home folder on the HD. I would now like to copy its contents onto an external harddisk. Problem 1: I have no rights to access the folder like that. Problem 2: It is encrypted. Problem 3: I don't know how to give myself the rights to access the folder nor do I know how to encrypt it. I assume that it might help that I still know these things: - my old login name - my old login phrase - a 32 characters long string of hexadecimal numbers that I copied to my list of passwords as "Ubuntu Encryption Code". I copied it digitally right after installing Ubuntu the first time and encrypting the home folder, so there won't be any typos. I am sure of that. The solutions that I saw so far, tell me that I need the "encryption phrase". But when I follow the instructions and use this phrase that I have in my list, I only get messages of denial. Can anyone help me through this special problem, please?

  Read the article

• Trying to install Proprietory Nvidia Graphics Drivers

  - by Peter Snow

  After reading and trying many different suggestions for some hours, I returned to this how-to: https://help.ubuntu.com/community/BinaryDriverHowto/Nvidia The first problem I encounter is how to identify which of the listed drivers support my Nvidia GEForce 630M graphics card. Following the links doesn't really help, since it is not stated there either (except where support for a new driver was added later which is explicitly stated, but the original devices covered are not). However, even if I knew, if it doesn't appear in the 'Additional Drivers' dialogue (see below), how will I install it? Second Issue: The article goes on to say that available drivers for my hardware are usually listed in 'Additional Drivers'. In my case, they aren't. Unfortunately, it doesn't tell me how to correct that or work around it? I've checked the bios and there is no way offered there to disable the integrated graphics, only the Nvidia graphics. I've also tried each available option in this: $ sudo update-alternatives --config i386-linux-gnu_gl_conf My system is an Acer Aspire 4752G bought May 2012. I'm running Ubuntu 12.04LTS. uname -a : 3.2.0-38-generic-pae #61-Ubuntu SMP Tue Feb 19 12:39:51 UTC 2013 i686 i686 i386 GNU/Linux It's 64bit hardware but I installed 32bit OS for greater software compatibility. Running $ sudo tail -fn 500 /var/log/Xorg.0.log | grep '(EE)' returns" (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 28.886] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) The reason for wanting the proprietor y drivers is because my laptop comes with 3D accelerated graphics adaptor and so rather than confining myself to struggling with the on-board graphics, I would rather use it. I also want to experiment with using it for bitmining (which uses the GPU's for computing power).

  Read the article

• Discovery methods

  - by Owen Allen

  In Ops Center, asset discovery is a process in which the software determines what assets exist in your environment. You can't monitor an asset, or do anything to it through Ops Center, until it's discovered. I've seen a couple of questions about how to discover various types of asset, so I thought I'd explain the discovery methods and what they each do. Find Assets - This discovery method searches for service tags on all known networks. Service tags are small files on some hardware and operating systems that provide basic identification info. Once a service tag has been found, you provide credentials to manage the asset. This method can discover assets quickly, but only if the target assets have service tags. Add Assets with discovery profile - This method lets you specify targets by providing IP addresses, IP ranges, or hostnames, as well as the credentials needed to connect to and manage these assets. You can create discovery profiles for any type of asset. Declare asset - This method lets you specify the details of a server, with or without a configured service processor. You can then use Ops Center to install a new operating system or configure the SP. This method works well for new hardware. These methods are all discussed in more detail in the Asset Management chapter of the Feature Reference guide.

  Read the article

• Is the BCM4306 wireless card ipv6 capable?

  - by horroricane

  I've been trying to connect with ipv6 enabled networks with my Broadcom Wireless card under Ubuntu 12.04. The wireless card model is BCM4306. $lspci $Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) $Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) I have been unsuccesful to connect through an ipv6 address, but I can still connect to a network when assigned an ipv4 address. While searching for an answer or a solution, I know the kernel can handle dealing with ipv6. So, what's left to question should be the hardware handling the connection. Unfortunately nothing comes up when I specifically try to search for information on BCM4306 ipv6 capabilities. I just tried using a wired connection to establish an ipv6 only connection to the network I'm on right now, but I got the same behavior of constant disconnections. Maybe it's not the hardware? I don't know.. I don't want to disable ipv6 on my machine as relevant networks I'll be connecting to will be using it exclusively, but I'm not sure what is wrong and which parts should I replace/fix to get this working.. Could someone please point me in a fruitful direction to get ipv6 working under Ubuntu 12.04?

  Read the article

• Why doesn't it seem to be any development in the field of 3D VR gear, especially with regard to gaming?

  - by neuviemeporte

  I remember that way back around 1995, there was this big craze with VR in the media, a whole bunch of (mostly mediocre) games labeled as "virtual-reality-interactive-movie (...)" were published. If I recall correctly, the first 3D VR helmet was called VFX-1 and was sold bundled with Descent and some dedicated joystick. I never owned one, and I read just one review which was mostly enthusiastic, but pointed to some weak points, like the eyes getting tired after an hour or so of playing. Then the whole thing basically flickered down and died. I suppose the main reason it wasn't successful was that the hardware of the day was not powerful enough, the VR gear's design wasn't perfected to make it comfortable and natural to use, and the companies that made it failed to market it successfully. What I can't understand is why isn't there any development in the field today. There is some vr-ish hardware mostly targeted at the consoles (Kinect, Wii remote, TrackIR), but all projects of creating some 3d head-mounted display system seem to be in early infancy, appear once in a trade show somewhere and aren't heard of again. I think it could work great with head tracking and some of today's shooters, flight sims (trackIR is nice but the movement scale translation is awkward) and other games with an FPP POV. Is there any technological reason why decent vr headgear can't be made today, or is it just that nobody really cares/everyone is scared to repeat the '90s failure?

  Read the article

• recent unreliable wireless connection

  - by gabkdlly

  Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP or WPA to encrypt the wireless network. Is it possible that someone is jamming my signal ?

  Read the article

• Places to store basic data

  - by Ella

  I am using PHP. I'm building a fully modular CMS, which is destined for the public. Some people might view this as a framework, but I intend to write a set of extensions for it, extensions that will make it a CMS :P Because it's completely modular I have a problem figuring out how to load extensions. Practically I need to get the list of active extensions, so I can load them inside my base class. I load them by reading some file headers, which contain a "dependency" field. That field decides the order in which I have to instantiate the objects. The problem is that when the CMS starts I have no database interface, because that's an extension too, so I can't store the active extensions list in the database :) You might ask how are extensions activated in the first place. Well - in the administration interface, which is an extension as well (obviously on first install of the CMS there will be some extensions active by default). Could writing that list inside a text file be a solution? The problem is that a lot of hosts are not very nice with scripts when they write files. And since this CMS is public I might have a problem here?

  Read the article

• implementing dynamic query handler on historical data

  - by user2390183

  EDIT : Refined question to focus on the core issue Context: I have historical data about property (house) sales collected from various sources in a centralized/cloud data source (assume info collection is handled by a third party) Planning to develop an application to query and retrieve data from this centralized data source Example Queries: Simple : for given XYZ post code, what is average house price for 3 bed room house? Complex: What is estimated price for an house at "DD,Some Street,XYZ Post Code" (worked out from average values of historic data filtered by various characteristics of the house: house post code, no of bed rooms, total area, and other deeper insights like house building type, year of built, features)? In addition to average price, the application should support other property info ** maximum, or minimum price..etc and trend (graph) on a selected property attribute over a period of time**. Hence, the queries should not enforce the search based on a primary key or few fixed fields In other words, queries can be What is the change in 3 Bed Room house price (irrespective of location) over last 30 days? What kind of properties we can get for X price (irrespective of location or house type) The challenge I have is identifying the domain (BI/ Data Analytical or DB Design or DB Query Interface or DW related or something else) this problem (dynamic query on historic data) belong to, so that I can do further exploration My findings so far I could be wrong on the following, so please correct me if you think so I briefly read about BI/Data Analytics - I think it is heavy weight solution for my problem and has scalability issues. DB Design - As I understand RDBMS works well if you know Data model at design time. I am expecting attributes about property or other entity (user) that am going to bring in, would evolve quickly. hence maintenance would be an issue. As I am going to have multiple users executing query at same time, performance would be a bottleneck Other options like Graph DB (http://www.tinkerpop.com/) seems to be bit complex (they are good. but using those tools meant for generic purpose, make me think like assembly programming to solve my problem ) BigData related solution are to analyse data from multiple unrelated domains So, Any suggestion on the space this problem fit in ? (Especially if you have design/implementation experience of back-end for property listing or similar portals)

  Read the article

• Facebook shared links not opening (Redirecting correctly) [on hold]

  - by Hammad

  I have been in a problem and after hours of searching find nothing useful to counter it. I have a website, and that website has RSS feed attached to facebook page. As I post the content to website it also appears on facebook page. But I have people complaining on my page that my posts don't open when they click the link to read the details. Since I am a Chrome user and didn't notice this happening for months. But as I checked it through firefox and Internet Explorer, I found the links shared actually don't open with these browswers. They only work in Chrome, means they are properly redirected in chrome browser and not in firefox and IE. Whenever I click on links of posts on my page through IE or firefox the url does not simply redirect to my website and I get to see nothing as if I am not connecting to Internet. When examining URL I see this: http://www.facebook.com/l.php?u=http%3A%2F%2Fbit.ly%2F112NVO9&h=EAQHDgTUv&s=1 Which shows that facebook is not redirecting the links properly. Moreover I also use link shortening service bit.ly to shorten my shared links. I have checked same problem exists even if I don't shorten my links. And I checked I am not alone, even the tech giant website mashable.com links also don't open in IE and FF from facebook, they only open in Chrome. From mobile phone the links don't open (redirected properly) even in chrome. Can anyone tell me what is the issue? Nothing much is written about it on Internet as no once has faced this problem. P.S: I have checked from different systems, the problem persists.

  Read the article

• Brightness going up to 100% on loading certain websites in Chrome

  - by picheto

  I'm using Google Chrome version 21.0.1180.89 on Ubuntu 12.04 and my laptop is a Sony VAIO VPCCW15FL (spec sheet). My video driver is the propietary "NVIDIA accelerated graphics driver (post-release updates)(version-current updates)". After installing Ubuntu, I discovered that neither the brightness control buttons (hardware) or the brightness slider (software) worked, and found out I could get the hardware buttons to work by installing the nvidiabl.deb package and oBacklight script. I'm using nvidiabl-dkms 0.77 and oBacklight 0.3.8. Still, the slider on the Ubuntu "Settings" does not work, but I don't care. There is an annoying thing happening when loading certain pages in Google Chrome: the brightness goes up to 100% when loading the webpage or when leaving it (closing the tab or typing a different URL on the omnibox). However, the "brightness tooltip" (that default brightness notification) remembers the position it was set to, so if I adjust the brightness with the HW buttons, the level gets adjusted relative to the value it was set to before "going 100%". I disabled the flash PPAPI plugin, but left the NPAPI plugin enabled, and the problem went away for pages with flash content. Still, the same thing happens when viewing HTML5 video, or when loading, for example, the Chrome Web Store or using the Scratchpad extension. I suppose it has to do with the rendering of certain elements using the GPU, but this is just a guess. This brightness thing does not happen when using Firefox 15.0 or any other application I have used yet. Does anybody know why this may be happening and what could I do to fix this without changing browser? Thanks a lot.

  Read the article

< Previous Page | 443 444 445 446 447 448 449 450 451 452 453 454  | Next Page >