Search Results

Search found 52729 results on 2110 pages for 'c net'.

Page 449/2110 | < Previous Page | 445 446 447 448 449 450 451 452 453 454 455 456  | Next Page >

  • Extending the .NET type system so the compiler enforces semantic meaning of primitive values in cert

    - by Drew Noakes
    I'm working with geometry a bit at the moment and am converting a lot between degrees and radians. Unfortunately, both of these are represented by double, so there's compile time warning/error if I try to pass a value in degrees where radians are expected. I believe F# has a compile-time solution for this (called units of measure.) I'd like to do something similar in C#. As another example, imagine a SQL library that accepts various query parameters as strings. It'd be good to have a way of enforcing that only clean strings were allowed to be passed in at runtime, and the only way to get a clean string was to pass through some SQL injection attack preventing logic. The obvious solution is to wrap the double/string/whatever in a new type to give it the type information the compiler needs. I'm curious if anyone has an alternative solution. If you do think wrapping is the only/best way, then please go into some of the downsides of the pattern (and any upsides I haven't mentioned too.) I'm especially concerned about the performance of abstracted primitive numeric types on my calculations at runtime.

    Read the article

  • .Net Reflection - Calling unexisting methods

    - by Joaozinho das Couves
    Lets say i call method M1 on class A using reflection. The method does not exist. Is there any way to put a handler on class A that says, "someone is trying to execute method M1"? Or Is it possible to add a method dinamically to a class? I want to add a method M1...Mn that always does MyStaticClass.DoAction("M1...Mn"); Something like: string methodName = "M1". A.AddMethod(methodname,x = MyStaticClass.DoAction(x)); Thanks

    Read the article

  • asp.net mvc select change redirect to Action

    - by mazhar kaunain baig
    I am correctly passing the action name from the Controller to the paging class and then using select list i want to redirect to that action. at this moment it is appending to the current url.i want the correct way of redirecting to the controller action manageUser using select list below What should we have here in Model.COntroller . ControllerName/ActionName/ or Just ActionName <select id="paging" onchange="location.href='<%= Model.Controller %>'+this.value"> <% for (int i = 1; i <= Model.TotalPages; i++) { %> <option id=<%=i %>><%=i %></option> <% } %> </select> public class PaginatedList<T> : List<T> { public string Controller { get; private set; } public PaginatedList(IQueryable<T> source, int pageIndex, int pageSize,string Cont) { Controller = Cont; // here is the controller } } Controller public ActionResult ManageUser(int? page) { const int pageSize = 5; var AllUser = UserRepository.GetAllUser(); var paginatedUsers = new PaginatedList<Users>(AllUser, page ?? 1, pageSize,"ManageUser/Page/"); return View(paginatedUsers); }

    Read the article

  • Login time out when calling opening a new window from modal popup (ASP.NET)

    - by Harsh Shah
    I have a weird problem. I have a window, on a button click I open a modal popup (using ModelPopupExtender), that let's you select a few criteria and then click a submit button. On click of submit button, I open a new window (using window.open()) that shows the status of what happened to your submitted request. However, every time this status window is opened, it goes to the login page. I am thinking the modal popup can't pass the authentication cookie to the newly opened window, but I'm not sure. Here's my web.config portion:

    Read the article

  • Excel 2010 64 bit can't create .net object

    - by aboes81
    I have a simple class library that I use in Excel. Here is a simplification of my class... using System; using System.Runtime.InteropServices; namespace SimpleLibrary { [ComVisible(true)] public interface ISixGenerator { int Six(); } public class SixGenerator : ISixGenerator { public int Six() { return 6; } } } In Excel 2007 I would create a macro enabled workbook and add a module with the following code: Public Function GetSix() Dim lib As SimpleLibrary.SixGenerator lib = New SimpleLibrary.SixGenerator Six = lib.Six End Function Then in Excel I could call the function GetSix() and it would return six. This no longer works in Excel 2010 64bit. I get a Run-time error '429': ActiveX component can't create object. I tried changing the platform target to x64 instead of Any CPU but then my code wouldn't compile unless I unchecked the Register for COM interop option, doing so makes it so my macro enable workbook cannot see SimpleLibrary.dll as it is no longer regsitered. Any ideas how I can use my library with Excel 2010 64 bit?

    Read the article

  • Logout solution (ASP.NET)

    - by Irgat
    I programmed a web site, prepared a login mechanism(via textbox, not Login tools), users want to logout, they click logout button. However, my problem is that if users don't click logout button or close web page or switch another one, How can I understand this situation? According my mechanism, when users logout ,in DB some insertion and delete operation are making. I also want to do this with closing page,switch another one. Thanks.

    Read the article

  • a simple secenario to implement javascript asp.net C#, question rephrased

    - by user287745
    i had asked this question before but got no answer correct. so, this is a simple thing textbox.text='user typing'; button:-store the value to a variable and a database. very simple nothing to it but there should be no post back, that is the page must not load again, try ajax? tried it not working i must a lot of time trying to implement this using java script ajax and read many many post, but for some reason i cannot implement the functionality correctly. please help. thank you

    Read the article

  • Please Explain .NET Delegates

    - by user275561
    So I read MSDN and Stack Overflow. I understand what the Action Delegate does in general but it is not clicking no matter how many examples I do. In general, the same goes for the idea of delegates. So here is my question. When you have a function like this: public GetCustomers(Action<IEnumerable<Customer>,Exception> callBack) { } What is this, and what should I pass to it?

    Read the article

  • readonly in asp.net mvc

    - by user281180
    How do I make a textbox read only in mvc? I have included the following snippet, but it`s not working. <%=Html.Textbox("test", "test", new { style="border: 0px; width:280px" ;readonly=true}%>

    Read the article

  • Set Custom ASP.NET UserControl variables when its in a Repeater

    - by tnriverfish
    <%@ Register Src="~/Controls/PressFileDownload.ascx" TagName="pfd" TagPrefix="uc1" %> <asp:Repeater id="Repeater1" runat="Server" OnItemDataBound="RPTLayer_OnItemDataBound"> <ItemTemplate> <asp:Label ID="LBLHeader" Runat="server" Visible="false"></asp:Label> <asp:Image ID="IMGThumb" Runat="server" Visible="false"></asp:Image> <asp:Label ID="LBLBody" Runat="server" class="layerBody"></asp:Label> <uc1:pfd ID="pfd1" runat="server" ShowContainerName="false" ParentContentTypeId="55" /> <asp:Literal ID="litLayerLinks" runat="server"></asp:Literal> </ItemTemplate> </asp:Repeater> System.Web.UI.WebControls.Label lbl; System.Web.UI.WebControls.Literal lit; System.Web.UI.WebControls.Image img; System.Web.UI.WebControls.HyperLink hl; System.Web.UI.UserControl uc; I need to set the ParentItemID variable for the uc1:pdf listed inside the repeater. I thought I should be able to find uc by looking in the e.Item and then setting it somehow. I think this is the part where I'm missing something. uc = (UserControl)e.Item.FindControl("pfd1"); if (uc != null) { uc.Attributes["ParentItemID"] = i.ItemID.ToString(); } Any thoughts would be appreciated. Also tried this with similar results... when I debug inside my usercontrol (pfd1) the parameters I am trying to set have not been set. uc = (UserControl)e.Item.FindControl("pfd1"); if (uc != null) { uc.Attributes.Add("ContainerID", _cid.ToString()); uc.Attributes.Add("ParentItemId", i.ItemID.ToString()); }

    Read the article

  • ASP.Net repeater item.DataItem is null

    - by mattgcon
    Within a webpage, upon loading, I fill a dataset with two table with a relation between those tables and then load the data into a repeater with a nested repeater. This can also occur after the user clicks on a button. The data gets loaded from a SQL database and the repeater datasource is set to the dataset after a postback. However, when ItemDataBound occurs the Item.Dataitem is always null. Why would this occur? below is my HTML repeater code <asp:Repeater ID="rptCustomSpaList" runat="server" onitemdatabound="rptCustomSpaList_ItemDataBound"> <HeaderTemplate> </HeaderTemplate> <ItemTemplate> <table> <tr> <td> <asp:Label ID="Label3" runat="server" Text="Spa Series:"></asp:Label> </td> <td> <asp:Label ID="Label4" runat="server" Text='<%#DataBinder.Eval(Container.DataItem, "SPASERIESVALUE") %>'></asp:Label> </td> </tr> <tr> <td> <asp:Label ID="Label5" runat="server" Text="Spa Model:"></asp:Label> </td> <td> <asp:Label ID="Label6" runat="server" Text='<%#DataBinder.Eval(Container.DataItem, "SPAMODELVALUE") %>'></asp:Label> </td> </tr> <tr> <td> <asp:Label ID="Label9" runat="server" Text="Acrylic Color:"></asp:Label> </td> <td> <asp:Label ID="Label10" runat="server" Text='<%#DataBinder.Eval(Container.DataItem, "ACRYLICCOLORVALUE") %>'></asp:Label> </td> </tr> <tr> <td> <asp:Label ID="Label11" runat="server" Text="Cabinet Color:"></asp:Label> </td> <td> <asp:Label ID="Label12" runat="server" Text='<%#DataBinder.Eval(Container.DataItem, "CABPANCOLORVALUE") %>'></asp:Label> </td> </tr> <tr> <td> <asp:Label ID="Label17" runat="server" Text="Cabinet Type:"></asp:Label> </td> <td> <asp:Label ID="Label18" runat="server" Text='<%#DataBinder.Eval(Container.DataItem, "CABINETVALUE") %>'></asp:Label> </td> </tr> <tr> <td> <asp:Label ID="Label13" runat="server" Text="Cover Color:"></asp:Label> </td> <td> <asp:Label ID="Label14" runat="server" Text='<%#DataBinder.Eval(Container.DataItem, "COVERCOLORVALUE") %>'></asp:Label> </td> </tr> </table> <asp:Label ID="Label15" runat="server" Text="Options:"></asp:Label> <asp:Repeater ID="rptCustomSpaItem" runat="server"> <HeaderTemplate> <table> </HeaderTemplate> <ItemTemplate> <tr> <td> <asp:Label ID="Label1" runat="server" Text='<%#DataBinder.Eval(Container.DataItem, "PROPERTY") %>'></asp:Label> </td> <td> <asp:Label ID="Label2" runat="server" Text='<%#DataBinder.Eval(Container.DataItem, "VALUE") %>'></asp:Label> </td> </tr> </ItemTemplate> <FooterTemplate> </table> </FooterTemplate> </asp:Repeater> <table> <tr> <td style="padding-top:15px;padding-bottom:30px;"> <asp:Label ID="Label7" runat="server" Text="Configured Price:"></asp:Label> </td> <td style="padding-top:15px;padding-bottom:30px;"> <asp:Label ID="Label8" runat="server" Text='<%#DataBinder.Eval(Container.DataItem, "SPAVALUEVALUE") %>'></asp:Label> </td> </tr> </table> <asp:Label ID="Label16" runat="server" Text="------"></asp:Label> </ItemTemplate> <FooterTemplate></FooterTemplate> </asp:Repeater>

    Read the article

  • Problem writing HTML content to Word document in ASP.NET

    - by saran
    I am trying to export the HTML page contents to Word. My Html display page is: What is your favourite color? NA List the top three school ? one National two Devs three PS And a button for click event. The button click event will open MS word and paste the page contents in word. The word page contains the table property of html design page. It occurs only in Word 2003. But in word 2007 the word document contains the text with out table property. How can I remove this table property in word 2003. I am not able to add the snapshots. Else i will make you clear. I am designing the web page by aspx. I am exporting the web page content by the following code. protected void Button1_Click(object sender, EventArgs e) { Response.ContentEncoding = System.Text.Encoding.UTF7; System.Text.StringBuilder SB = new System.Text.StringBuilder(); System.IO.StringWriter SW = new System.IO.StringWriter(); System.Web.UI.HtmlTextWriter htmlTW = new System.Web.UI.HtmlTextWriter(SW); tbl.RenderControl(htmlTW); string strBody = "<html>" + "<body>" + "<div><b>" + htmlTW.InnerWriter.ToString() + "</b></div>" + "</body>" + "</html>"; Response.AppendHeader("Content-Type", "application/msword"); Response.AppendHeader("Content-disposition", "attachment; filename=" + fileName); Response.ContentEncoding = System.Text.Encoding.UTF7; string fileName1 = "C://Temp/Excel" + DateTime.Now.Millisecond.ToString(); BinaryWriter writer = new BinaryWriter(File.Open(fileName1, FileMode.Create)); writer.Write(strBody); writer.Close(); FileStream fs = new FileStream(fileName1, FileMode.Open, FileAccess.Read); byte[] renderedBytes; // Create a byte array of file stream length renderedBytes = new byte[fs.Length]; //Read block of bytes from stream into the byte array fs.Read(renderedBytes, 0, System.Convert.ToInt32(fs.Length)); //Close the File Stream fs.Close(); FileInfo TheFile = new FileInfo(fileName1); if (TheFile.Exists) { File.Delete(fileName1); } Response.BinaryWrite(renderedBytes); Response.Flush(); Response.End(); }

    Read the article

  • Controller class not available in Add View ASP.NET MVC

    - by Tassadaque
    Hi I have created the following controller i want to add view that should have the data access class UserMagnament.Controller.menuitems but when i add view by right clicking on view folder,it is not showing "UserMagnament.Controller.menuitems" in add data class using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Mvc; using UserManagement.Models; namespace UserManagement.Controllers { public class menuitems { EvoLetDataContext db1 = new EvoLetDataContext(); public menuitems() { } public IQueryable<UMUserType> menuitems() { return db1.UMUserTypes; //this.Packages = _SysPackage; //this.Modules = _SysModule; } public List<SysPackage> Packages { get; private set; } public List<SysModule> Modules { get; private set; } } public class Default1Controller : Controller { // // GET: /Default1/ public ActionResult Index() { return View(new menuitems()); } } }

    Read the article

  • Blocking problem, C#, .net, Deserializing XML to object problem

    - by fernando
    Hi I have a blocking problem I have XML file under some url http://myserver/mywebApp/myXML.xml In the below code which I run in Console Application, bookcollection has null Books field :( <books> <book id="5352"> <date>1986-05-05</date> <title> Alice in chains </title> </book> <book id="4334"> <date>1986-05-05</date> <title> 1000 ways to heaven </title> </book> <book id="1111"> <date>1986-05-05</date> <title> Kitchen and me </title> </book> </books> XmlDocument doc = new XmlDocument(); doc.Load("http://myserver/mywebapp/myXML.xml"); BookCollection books = new BookCollection(); XmlNodeReader reader2 = new XmlNodeReader(doc.DocumentElement); XmlSerializer ser2 = new XmlSerializer(books.GetType()); object obj = ser2.Deserialize(reader2); BookCollection books2= (BookCollection)obj; using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication1 { [Serializable()] public class Book { [System.Xml.Serialization.XmlAttribute("id")] public string id { get; set; } [System.Xml.Serialization.XmlElement("date")] public string date { get; set; } [System.Xml.Serialization.XmlElement("title")] public string title { get; set; } } } using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Xml.Serialization; namespace ConsoleApplication1 { [Serializable()] [System.Xml.Serialization.XmlRootAttribute("books", Namespace = "", IsNullable = false)] public class BookCollection { [XmlArray("books")] [XmlArrayItem("book", typeof(Book))] public Book[] Books { get; set; } } }

    Read the article

  • how to pass an id number string to this class (asp.net, c#)

    - by Phil
    I'm very much a vb person, but have had to use this id number class in c#. I got it from http://www.codingsanity.com/idnumber.htm : using System; using System.Text.RegularExpressions; namespace Utilities.SouthAfrica { /// <summary> /// Represents a South African Identity Number. /// valid number = 7707215230080 /// invalid test number = 1234567891234 /// /// </summary> [Serializable()] public class IdentityNumber { #region Enumerations /// <summary> /// Indicates a gender. /// </summary> public enum PersonGender { Female = 0, Male = 5 } public enum PersonCitizenship { SouthAfrican = 0, Foreign = 1 } #endregion #region Declarations static Regex _expression; Match _match; const string _IDExpression = @"(?<Year>[0-9][0-9])(?<Month>([0][1-9])|([1][0-2]))(?<Day>([0-2][0-9])|([3][0-1]))(?<Gender>[0-9])(?<Series>[0-9]{3})(?<Citizenship>[0-9])(?<Uniform>[0-9])(?<Control>[0-9])"; #endregion #region Constuctors /// <summary> /// Sets up the shared objects for ID validation. /// </summary> static IdentityNumber() { _expression = new Regex(_IDExpression, RegexOptions.Compiled | RegexOptions.Singleline); } /// <summary> /// Creates the ID number from a string. /// </summary> /// <param name="IDNumber">The string ID number.</param> public IdentityNumber(string IDNumber) { _match = _expression.Match(IDNumber.Trim()); } #endregion #region Properties /// <summary> /// Indicates the date of birth encoded in the ID Number. /// </summary> /// <exception cref="System.ArgumentException">Thrown if the ID Number is not usable.</exception> public DateTime DateOfBirth { get { if(IsUsable == false) { throw new ArgumentException("ID Number is unusable!", "IDNumber"); } int year = int.Parse(_match.Groups["Year"].Value); // NOTE: Do not optimize by moving these to static, otherwise the calculation may be incorrect // over year changes, especially century changes. int currentCentury = int.Parse(DateTime.Now.Year.ToString().Substring(0, 2) + "00"); int lastCentury = currentCentury - 100; int currentYear = int.Parse(DateTime.Now.Year.ToString().Substring(2, 2)); // If the year is after or at the current YY, then add last century to it, otherwise add // this century. // TODO: YY -> YYYY logic needs thinking about if(year > currentYear) { year += lastCentury; } else { year += currentCentury; } return new DateTime(year, int.Parse(_match.Groups["Month"].Value), int.Parse(_match.Groups["Day"].Value)); } } /// <summary> /// Indicates the gender for the ID number. /// </summary> /// <exception cref="System.ArgumentException">Thrown if the ID Number is not usable.</exception> public PersonGender Gender { get { if(IsUsable == false) { throw new ArgumentException("ID Number is unusable!", "IDNumber"); } int gender = int.Parse(_match.Groups["Gender"].Value); if(gender < (int) PersonGender.Male) { return PersonGender.Female; } else { return PersonGender.Male; } } } /// <summary> /// Indicates the citizenship for the ID number. /// </summary> /// <exception cref="System.ArgumentException">Thrown if the ID Number is not usable.</exception> public PersonCitizenship Citizenship { get { if(IsUsable == false) { throw new ArgumentException("ID Number is unusable!", "IDNumber"); } return (PersonCitizenship) Enum.Parse(typeof(PersonCitizenship), _match.Groups["Citizenship"].Value); } } /// <summary> /// Indicates if the IDNumber is usable or not. /// </summary> public bool IsUsable { get { return _match.Success; } } /// <summary> /// Indicates if the IDNumber is valid or not. /// </summary> public bool IsValid { get { if(IsUsable == true) { // Calculate total A by adding the figures in the odd positions i.e. the first, third, fifth, // seventh, ninth and eleventh digits. int a = int.Parse(_match.Value.Substring(0, 1)) + int.Parse(_match.Value.Substring(2, 1)) + int.Parse(_match.Value.Substring(4, 1)) + int.Parse(_match.Value.Substring(6, 1)) + int.Parse(_match.Value.Substring(8, 1)) + int.Parse(_match.Value.Substring(10, 1)); // Calculate total B by taking the even figures of the number as a whole number, and then // multiplying that number by 2, and then add the individual figures together. int b = int.Parse(_match.Value.Substring(1, 1) + _match.Value.Substring(3, 1) + _match.Value.Substring(5, 1) + _match.Value.Substring(7, 1) + _match.Value.Substring(9, 1) + _match.Value.Substring(11, 1)); b *= 2; string bString = b.ToString(); b = 0; for(int index = 0; index < bString.Length; index++) { b += int.Parse(bString.Substring(index, 1)); } // Calculate total C by adding total A to total B. int c = a + b; // The control-figure can now be determined by subtracting the ones in figure C from 10. string cString = c.ToString() ; cString = cString.Substring(cString.Length - 1, 1) ; int control = 0; // Where the total C is a multiple of 10, the control figure will be 0. if(cString != "0") { control = 10 - int.Parse(cString.Substring(cString.Length - 1, 1)); } if(_match.Groups["Control"].Value == control.ToString()) { return true; } } return false; } } #endregion } } Can someone please tell the syntax for how I pass an id number to the class? Thanks

    Read the article

  • Loading a XML, but for asp.net 2.0

    - by Blankman
    I need to load an XML document into my Dictionary<string,string> object. XML looks like: <nodes> <node id="123"> <text>text goes here</text> </node> </nodes> How can I do this using XmlDocument? I want readability over performance, and I find XmlReader to be hard to read b/c you have to keep checking the node type.

    Read the article

  • VB.NET: Scrollbar "button"?

    - by Omega
    I plan on using a scrollbar for, well, scrolling an image. The image is 200x500, however, the only visible area is 200x250. So I set the max value to 250, and the min value to 0. The idea is that if I drag the scrollbar's button to the bottom, 250 pixels will have moved for the image, right? But wait, the scrollbar's button is.... very small. And the scrollbar is actually pretty long. Is there a way to make the scrollbar's button longer?

    Read the article

  • WPF/.NET data access models - resource recommendations

    - by jasonk
    We're in the early design/prep phases of transferring/updating a rather large "legacy" 3 tier client-server app to a new version. We’re looking at doing WPF over Winforms as it appears to be the direction Microsoft is pushing development of the future and we’d like the maximize the life cycle/span of the apps. That said during the rewrite we’d like to make as many changes to our data access/presentation model to improve performance as much as possible up front as many. I’ve been doing some research along that vein but the vast majority of the resources I've found that discuss WPF focus only simple data tracking apps or focus on the very basics UI design/controls. The few items that even discuss data presentation are fairly elementary in depth. Are there any books/articles/recommended reading/other resources recommended for development related to large enterprise level business apps? Any “gotchas” that should/could be avoided? General advice to minimize the time underwater

    Read the article

  • ASP.NET MVC 2 JSONP with MVC Futures

    - by mighty_man
    I´m using mvc futures 2 with WebApiEnabled for XML and JSON support. But due to cross domain issues with jQuery $.ajax I´m lookin in to JSONP. Is there a simple way to extend futures rest function for JSONP or should I do something else. Do anyone have some hints on this subject ?

    Read the article

  • Does ASP.net Report Viewer / Reports require Reporting Services on SQL server

    - by soldieraman
    I have an application that makes use of Report Viewer and Report (.rdlc) files. Does this mean that I need to have "Reporting Services" installed on my SQL server?? Also would not having "SQL Server Analysis services" affect me any way I want to make sure I keep using - SQL Server Profiler - SQL Server Agent - create and run management tasks - Reporting services if the first question's answer is true.

    Read the article

  • Code generating SOAP Web Service Proxy objects yourself - C#/.NET 3.5/T4

    - by tyndall
    Is there a framework or code already available that will give me more control over the code that gets generated based off my web references? I'm working at a new company. And the Web Services Proxies are all self contained in their own assembly. I would really rather generate this whole project. Every time they change something on the Services-side (Java) the WSDL references have to be dropped and re-added. (I can't figure out what those guys are doing on their end that messes with the WSDL bad enough that this needs to be done so much) Their are 10 of these references. I'd rather codegen the whole thing at compile time. Every time. What are my options?

    Read the article

  • ASP.NET GridView issue with DataFormatString in a BoundField

    - by David
    I have a BoundField in a GridView whose datatype (in MSSQL) is time(7). The format is being displayed as: hh:mm:ss.xxxxxx I want to add a DataFormatString to this boundfield so that the field displays in the format: hh:mm:ss Here is a snippet of the .aspx file that I'm modifying: <asp:BoundField DataField="ProcTime" HeaderText="ProcTime" SortExpression="ProcTime" ApplyFormatInEditMode="true" HtmlEncode="true" DataFormatString="{0:F0}" /> I've tried many different format strings (t, T, d, D, m, etc) but it does not change the format of the boundfield. What am I missing?

    Read the article

< Previous Page | 445 446 447 448 449 450 451 452 453 454 455 456  | Next Page >