Search Results

Search found 13652 results on 547 pages for 'full'.

Page 450/547 | < Previous Page | 446 447 448 449 450 451 452 453 454 455 456 457  | Next Page >

  • how to delete a line from file using awk filtered by some string

    - by embedded
    I have a file delimited by space. I need to write an awk command that receives a host name argument and it should replace the host name if it already defined in the file. It must be a full match not partially - if the file contains this host name: localhost searching for "ho" will fail and it will be added to the end of the file. another option is a delete: again awk receives host name argument and it should remove it from the file if exists. This is what I have so far: (It needs some enhancements) if [ "$DELETE_FLAG" == "" ]; then # In this case the entry should be added or updated # if clause deals with updating an existing entry # END clause deals with adding a new entry awk -F"[ ]" "BEGIN { found = 0;} \ { \ if ($2 == $HOST_NAME) { \ print \"$IP_ADDRESS $HOST_NAME\"; \ found = 1; \ } else { \ print \$0; \ } \ } \ END { \ if (found == 0) { \ print \"$IP_ADDRESS $HOST_NAME\"; } \ } " \ /etc/hosts > /etc/temp_hosts else # Delete an existing entry awk -F'[ ]' '{if($2 != $HOST_NAME) { print $0} }' /etc/hosts > /etc/temp_hosts fi Thanks

    Read the article

  • Worth website that a web developer must surf daily?

    - by I Like PHP
    Hello All, this may be not a right place to ask this question, but i can get best answer only from here, so i m posting here. i m a web developer and working with technology PHP,MySQL, JavaScript,jQuery,AJAX, CSS, HTML, JSON i daily surf few websites regarding web development , i know there are a lot of website with very good knowledge but we are not aware of that so i think we have to share with each other.i m mentioning some useful links that we must surf daily for gaining knowledge and do better/fast development. please you also suggest some good links which you surf regularly and best in their field. i surf belows links regularly - [Stack Overflow][1] // No doubt, it is best - [Delicious][2]// best social bookmarking website - [Smashing Magazine][3] // Best site to improve knowledege for a web developer - [Net tuts][4] // Best tutorail wesbsite with full explanation - [Official PHP site ][5] // i think nothing to mention about it( just superb) - [Javascript Debugger][6] // U can filter your javascript/jquery code here - [jQuery Official site][7] // best to learn jQuery i m waiting for you great response. i also need any good and trusted website on mysql, i think mysql officail website is very confusing, i had to search a lot to find a single thing, if u have any good regarding mysql then share please. Thanks alwayz.

    Read the article

  • regexp to match string with (comma-separated) number at start and to split into number and rest?

    - by mix
    Given a string such as: 23,234,456 first second third How can I split string this into two parts, where part 1 contains the number at the beginning and part 2 contains the rest---but only if the string STARTS with a number, and the number can be comma-separated or not? In other words, I want two results: 23,234,456 and first second third. If there's a number in that string that isn't part of the first number then it should be in the second result. My best stab at this so far, to grab the number at the beginning, is something like this: ^[0-9]+(,[0-9]{3})* Which seems to grab a comma-separated or non-comma-separated number that starts the line. However, when I run this in the Javascript console I get not only the full number, but also a match on just the last 3 digits with their preceeding ,. (e.g. 23,234,456 and ,456). As for getting the rest into another var I'm having trouble. I tried working with \b, etc., but I think I must be missing something fundamental about grabbing the rest of the line. I'm doing this in Javascript in case it matters. More examples of what to match and what not to match. 2 one two three should return 2 and one two three 2345 one two three should return 2345 and one two three 2 one 2 three should return 2 and one 2 three 2,234 one two 3,000 should return 2,234 and one two 3,000 The space between parts 1 and two could be included in the beginning of part 2.

    Read the article

  • Hide div based on url

    - by Ghetto Styles
    Sorry if this is another repost. I have been attempting to find a solution but nothing works that I have tried. I am using a blog which I have full html control over. I can usually find my way around basic html but when it comes to Java or CSS I am a complete newb. Sorry, I know absolutely nothing. Now that that is out of the way. I have two sidebar div's that I am trying to hide on one specific url to utilize more space for a content iframe. This is one of the coded I have tried to use which doesn't seem to work or I am missing something. <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <script language="text/javascript" <?php &#36;(function(){ if (window.location.search === "mywebsite/Videos.html") { &#36;('#navleft').hide(); } else { &#36;('#navleft').show(); } }); ?> </script> Please remember I do not know anything when it comes to php or java. I want to do this for both #navright and #navleft. Also this is in the CSS section. Thanks for any help!! #navright{ width: 200px; } #navleft{ width: 200px; } #content{ margin:0px; }

    Read the article

  • Can it be important to call remove() on an EJB 3 stateless session bean? Perhaps on weblogic?

    - by Michael Borgwardt
    I'm in the process of migrating an EJB 2 application to EJB 3 (and what a satisfying task it is to delete all those deployment descriptors!). It used to run on Weblogic and now runs on Glassfish. The task is going very smoothly, but one thing makes me wary: The current code takes great care to ensure that EJBObject.remove() is called on the bean when it's done its job, and other developers have (unfortunately very vague) memories of "bad things" happening when that was not done. However, with EJB3, the implementation class does not implement EJBObject, so there is no remove() method to be called. And my understanding is that there isn't really any point at all in calling it on stateless session beans, since they are, well, stateless. Could these "bad things" have been weblogic-specific? If not, what else? Should I avoid the full EJB3 lightweightness and keep a remote interface that extends EJBObject? Or just write it off as cargo-cult programming and delete all those try/finally clauses? I'm leaning towards the latter, but now feeling very comfortable with it.

    Read the article

  • Exchange Server 2010: move mailboxes from recoveded and mounted edb to user's mailbox [closed]

    - by Cook
    One of our exchange servers crashed, and I am trying to recover the mailboxes. We had 1 exchange 2003 server named "apex" and 1 exchange 2010 server named "2008Enterprise. the exchange 2010 server named "2008Enterprise" crashed. I created a new exchange 2010 server named "Providence". I ran the command on Providence: New-MailboxDatabase -Recovery -Name JBCMail -Server Providence -EdbFilePath "c:\data\Exchange\Mailbox\Mailbox Database 0579285147\Mailbox Database 0579285147.edb" -LogFolderPath "c:\data\Exchange\Mailbox\Mailbox Database 0579285147" this command executed and finished without error I then ran the command: eseutil /p E00 this command was executed from the below directory: c:\data\Exchange\Mailbox\Mailbox Database 0579285147 I then mounted the JBCMail with the mount command note: I do not have my full typed command. Inside my Exchange Management Console (EMC) I can view the new mailbox database named JBCMail. The JBCMail database is show as mounted on the exchange server named Providence. I can see the crashed Exchange server named 2008Exchange. In the EMC the crashed exchange server states the Copy Status under ServerConfiguration-Mailbox is ServiceDown. From here I need to recover three mailboxes The mail boxes are on the apex server. How do I move the mailboxs from apex to Providence? How do I restore the mailboxes from JBCmail mounted database to the user's mailbox? I do not fully understand how to use the Restore-Mailbox command because when I use this command it tries to restore the mailbox to the dead apex server. Restore-Mailbox -ID 'Jason Young' -RecoveryDatabase JBCMail

    Read the article

  • Celery Received unregistered task of type (run example)

    - by Echeg
    I'm trying to run example from Celery documentation. I run: celeryd --loglevel=INFO /usr/local/lib/python2.7/dist-packages/celery/loaders/default.py:64: NotConfigured: No 'celeryconfig' module found! Please make sure it exists and is available to Python. "is available to Python." % (configname, ))) [2012-03-19 04:26:34,899: WARNING/MainProcess] -------------- celery@ubuntu v2.5.1 ---- **** ----- --- * *** * -- [Configuration] -- * - **** --- . broker: amqp://guest@localhost:5672// - ** ---------- . loader: celery.loaders.default.Loader - ** ---------- . logfile: [stderr]@INFO - ** ---------- . concurrency: 4 - ** ---------- . events: OFF - *** --- * --- . beat: OFF -- ******* ---- --- ***** ----- [Queues] -------------- . celery: exchange:celery (direct) binding:celery tasks.py: # -*- coding: utf-8 -*- from celery.task import task @task def add(x, y): return x + y run_task.py: # -*- coding: utf-8 -*- from tasks import add result = add.delay(4, 4) print (result) print (result.ready()) print (result.get()) In same folder celeryconfig.py: CELERY_IMPORTS = ("tasks", ) CELERY_RESULT_BACKEND = "amqp" BROKER_URL = "amqp://guest:guest@localhost:5672//" CELERY_TASK_RESULT_EXPIRES = 300 When I run "run_task.py": on python console eb503f77-b5fc-44e2-ac0b-91ce6ddbf153 False errors on celeryd server [2012-03-19 04:34:14,913: ERROR/MainProcess] Received unregistered task of type 'tasks.add'. The message has been ignored and discarded. Did you remember to import the module containing this task? Or maybe you are using relative imports? Please see http://bit.ly/gLye1c for more information. The full contents of the message body was: {'retries': 0, 'task': 'tasks.add', 'utc': False, 'args': (4, 4), 'expires': None, 'eta': None, 'kwargs': {}, 'id': '841bc21f-8124-436b-92f1-e3b62cafdfe7'} Traceback (most recent call last): File "/usr/local/lib/python2.7/dist-packages/celery/worker/consumer.py", line 444, in receive_message self.strategies[name](message, body, message.ack_log_error) KeyError: 'tasks.add' Please explain what's the problem.

    Read the article

  • What influences running time of reading a bunch of images?

    - by remi
    I have a program where I read a handful of tiny images (50000 images of size 32x32). I read them using OpenCV imread function, in a program like this: std::vector<std::string> imageList; // is initialized with full path to the 50K images for(string s : imageList) { cv::Mat m = cv::imread(s); } Sometimes, it will read the images in a few seconds. Sometimes, it takes a few minutes to do so. I run this program in GDB, with a breakpoint further away than the loop for reading images so it's not because I'm stuck in a breakpoint. The same "erratic" behaviour happens when I run the program out of GDB. The same "erratic" behaviour happens with program compiled with/without optimisation The same "erratic" behaviour happens while I have or not other programs running in background The images are always at the same place in the hard drive of my machine. I run the program on a Linux Suse distrib, compiled with gcc. So I am wondering what could affect the time of reading the images that much?

    Read the article

  • Writing own Unix shell in C - Problems with PATH and execv

    - by user1287523
    I'm writing my own shell in C. It needs to be able to display the users current directory, execute commands based on the full path (must use execv), and allow the user to change the directory with cd. This IS homework. The teacher only gave us a basic primer on C and a very brief skeleton on how the program should work. Since I'm not one to give up easily I've been researching how to do this for three days, but now I'm stumped. This is what I have so far: Displays the user's username, computername, and current directory (defaults to home directory). Prompts the user for input, and gets the input Splits the user's input by " " into an array of arguments Splits the environment variable PATH by ":" into an array of tokens I'm not sure how to proceed from here. I know I've got to use the execv command but in my research on google I haven't really found an example I understand. For instance, if the command is bin/ls, how does execv know the display all files/folders from the home directory? How do I tell the system I changed the directory? I've been using this site a lot which has been helpful: http://linuxgazette.net/111/ramankutty.html but again, I'm stumped. Thanks for your help. Let me know if I should post some of my existing code, I'm wasn't sure if it was necessary though.

    Read the article

  • Rails 3 MySQL 2 reports an error in what looks to be valid SQL syntax

    - by John Judd
    I am trying to use the following bit of code to help in seeding my database. I need to add data continually over development and do not want to have to completely reseed data every time I add something new to the seeds.rb file. So I added the following function to insert the data if it doesn't already exist. def AddSetting(group, name, value, desc) Admin::Setting.create({group: group, name: name, value: value, description: desc}) unless Admin::Setting.find_by_sql("SELECT * FROM admin_settings WHERE group = '#{group}' AND name = '#{name}';").exists? end AddSetting('google', 'analytics_id', '', 'The ID of your Google Analytics account.') AddSetting('general', 'page_title', '', '') AddSetting('general', 'tag_line', '', '') This function is included in the db/seeds.rb file. Is this the right way to do this? However I am getting the following error when I try to run it through rake. rake aborted! Mysql2::Error: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'group = 'google' AND name = 'analytics_id'' at line 1: SELECT * FROM admin_settings WHERE group = 'google' AND name = 'analytics_id'; Tasks: TOP => db:seed (See full trace by running task with --trace) Process finished with exit code 1 What is confusing me is that I am generating correct SQL as far as I can tell. In fact my code generates the SQL and I pass that to the find_by_sql function for the model, Rails itself can't be changing the SQL, or is it? SELECT * FROM admin_settings WHERE group = 'google' AND name = 'analytics_id'; I've written a lot of SQL over the years and I've looked through similar questions here. Maybe I've missed something, but I cannot see it.

    Read the article

  • Optimize INSERT / UPDATE / DELETE operation

    - by clime
    I wonder if the following script can be optimized somehow. It does write a lot to disk because it deletes possibly up-to-date rows and reinserts them. I was thinking about applying something like "insert ... on duplicate key update" and found some possibilities for single-row updates but I don't know how to apply it in the context of INSERT INTO ... SELECT query. CREATE OR REPLACE FUNCTION update_member_search_index() RETURNS VOID AS $$ DECLARE member_content_type_id INTEGER; BEGIN member_content_type_id := (SELECT id FROM django_content_type WHERE app_label='web' AND model='member'); DELETE FROM watson_searchentry WHERE content_type_id = member_content_type_id; INSERT INTO watson_searchentry (engine_slug, content_type_id, object_id, object_id_int, title, description, content, url, meta_encoded) SELECT 'default', member_content_type_id, web_member.id, web_member.id, web_member.name, '', web_user.email||' '||web_member.normalized_name||' '||web_country.name, '', '{}' FROM web_member INNER JOIN web_user ON (web_member.user_id = web_user.id) INNER JOIN web_country ON (web_member.country_id = web_country.id) WHERE web_user.is_active=TRUE; END; $$ LANGUAGE plpgsql; EDIT: Schemas of web_member, watson_searchentry, web_user, web_country: http://pastebin.com/3tRVPPVi. (content_type_id, object_id_int) in watson_searchentry is unique pair in the table but atm the index is not present (there is no use for it). This script should be run at most once a day for full rebuilds of search index.

    Read the article

  • Adding fields to Django form dynamically (and cleanly)

    - by scott
    Hey guys, I know this question has been brought up numerous times, but I'm not quite getting the full implementation. As you can see below, I've got a form that I can dynamically tell how many rows to create. How can I create an "Add Row" link that tells the view how many rows to create? I would really like to do it without augmenting the url... # views.py def myView(request): if request.method == "POST": form = MyForm(request.POST, num_rows=1) if form.is_valid(): return render_to_response('myform_result.html', context_instance=RequestContext(request)) else: form = MyForm(num_rows=1) return render_to_response('myform.html', {'form':form}, context_instance=RequestContext(request)) # forms.py class MyForm(forms.Form): def __init__(self, *args, **kwargs): num_rows = kwargs.pop('num_rows',1) super(MyForm, self).__init__(*args, **kwargs) for row in range(0, num_rows): field = forms.CharField(label="Row") self.fields[str(row)] = field # myform.html http://example.com/myform <form action="." method="POST" accept-charset="utf-8"> <ul> {% for field in form %} <li style="margin-top:.25em"> <span class="normal">{{ field.label }}</span> {{ field }} <span class="formError">{{ field.errors }}</span> </li> {% endfor %} </ul> <input type="submit" value="Save"> </form> <a href="ADD_ANOTHER_ROW?">+ Add Row</a>

    Read the article

  • Does the Java Memory Model (JSR-133) imply that entering a monitor flushes the CPU data cache(s)?

    - by Durandal
    There is something that bugs me with the Java memory model (if i even understand everything correctly). If there are two threads A and B, there are no guarantees that B will ever see a value written by A, unless both A and B synchronize on the same monitor. For any system architecture that guarantees cache coherency between threads, there is no problem. But if the architecture does not support cache coherency in hardware, this essentially means that whenever a thread enters a monitor, all memory changes made before must be commited to main memory, and the cache must be invalidated. And it needs to be the entire data cache, not just a few lines, since the monitor has no information which variables in memory it guards. But that would surely impact performance of any application that needs to synchronize frequently (especially things like job queues with short running jobs). So can Java work reasonably well on architectures without hardware cache-coherency? If not, why doesn't the memory model make stronger guarantees about visibility? Wouldn't it be more efficient if the language would require information what is guarded by a monitor? As i see it the memory model gives us the worst of both worlds, the absolute need to synchronize, even if cache coherency is guaranteed in hardware, and on the other hand bad performance on incoherent architectures (full cache flushes). So shouldn't it be more strict (require information what is guarded by a monitor) or more lose and restrict potential platforms to cache-coherent architectures? As it is now, it doesn't make too much sense to me. Can somebody clear up why this specific memory model was choosen? EDIT: My use of strict and lose was a bad choice in retrospect. I used "strict" for the case where less guarantees are made and "lose" for the opposite. To avoid confusion, its probably better to speak in terms of stronger or weaker guarantees.

    Read the article

  • Obj-C Sending Messages Between Classes

    - by user544359
    I'm a newbie in iPhone Programming. I'm trying to send a message from one view controller to another. The idea is that viewControllerA takes information from the user and sends it to viewControllerB. viewControllerB is then supposed to display the information in a label. viewControllerA.h #import <UIKit/UIKit.h> @interface viewControllerA : UIViewController { int num; } -(IBAction)do; @end viewControllerA.m #import "viewControllerA.h" #import "viewControllerB.h" @implementation viewControllerA - (IBAction)do { //initializing int for example num = 2; viewControllerB *viewB = [[viewControllerB alloc] init]; [viewB display:num]; [viewB release]; //viewA is presented as a ModalViewController, so it dismisses itself to return to the //original view, i know it is not efficient [self dismissModalViewControllerAnimated:YES]; } - (void)dealloc { [super dealloc]; } @end viewControllerB.h #import <UIKit/UIKit.h> @interface viewControllerB : UIViewController { IBOutlet UILabel *label; } - (IBAction)openA; - (void)display:(NSInteger)myNum; @end viewControllerB.m #import "viewControllerB.h" #import "viewControllerA.h" @implementation viewControllerB - (IBAction)openA { //presents viewControllerA when a button is pressed viewControllerA *viewA = [[viewControllerA alloc] init]; [self presentModalViewController:viewA animated:YES]; } - (void)display:(NSInteger)myNum { NSLog(@"YES"); [label setText:[NSString stringWithFormat:@"%d", myNum]]; } @end YES is logged successfully, but the label's text does not change. I have made sure that all of my connections in Interface Builder are correct, in fact there are other (IBAction) methods in my program that change the text of this very label, and all of those other methods work perfectly... Any ideas, guys? You don't need to give me a full solution, any bits of information will help. Thanks.

    Read the article

  • NServiceBus & MSMQ: How To Change the Default Permissions on the Queue?

    - by Amy T
    My team is on our first attempt at using NServiceBus (v2.0), using MSMQ as the backing storage. We're getting stuck on queue permissions. We're using it in a Web Forms application, where the user account the website runs under is not an administrator on the machine. When NServiceBus creates the MSMQ queue, it gives the local administrators group full control, and the local everyone and anonymous groups permissions to send messages. But then later, as part of initializing the queue, NServiceBus tries to read all of its messages. That's where we run into the permissions error. Since the website isn't running as an administrator, it's not allowed to read messages. How are other people dealing with this? Do your applications run as administrators? Or do you create the MSMQ queue in your code first, giving it the permissions you need, so that NServiceBus doesn't have to create it? Or is there a bit of configuration we're missing? Or are we likely writing our code that uses NServiceBus incorrectly to be running into this?

    Read the article

  • First-time software contractor, building a system for a multi-site client; who should own the intell

    - by matthew
    I'm very new to software contracting; this is my first project. I've just built a point-of-sale software system for a client, and neither of us put a lot of work into the contract. I wrote that the software was "jointly owned" with exclusive license for use given to the client. The client is using it at one store and is very pleased with it. The client is also planning to expand to numerous stores over time, and wants to use it in every store. The client also now wants full ownership of the software, with me as the exclusive developer. I am very hesitant to allow this, and I am seeking previous experience. Should I sell the IP but demand royalties for every site at which it's installed? Should I demand royalties for every sale made using the software? Should I really start talking to a lawyer? A couple of other details: in terms of risk, it is fair to say that the client is assuming the risk, but the client is now using the software and exclaiming how great it is (and so I assume, how it is improving business). Also, the software is tailored to the client specifically, but could, with a bit of work, be repackaged and resold to other clients. Even if the client owned the IP I would certainly want to make sure that I then did have (significant) royalties on such sales.

    Read the article

  • choose javascript variable based on element id from jquery

    - by phoffer
    I feel like this is a simple question, but I am still relatively new to javascript and jquery. I am developing a site for a touch interface that uses unordered lists and jquery .click functions to take input data. I have a section to input a m:ss time, with 3 divs, each containing a list of digits for time. I need to get the input for each column and set it as a variable. I originally designed the inputs to change form inputs, because I didn't understand javascript very much. It was easy to change the 3 hidden inputs by using div id's, but I can't figure out how to do it now with javascript variables. Here is my original jquery code... $("div#time>div>ul>li").click(function() { var id = $(this).parents(".time").attr("name"); var number = $(this).html(); $("input#"+id).val(number); }); The last line sets one of 3 hidden inputs equal to whatever was clicked. I need to make it so separate variables take the inputs, then I can manipulate those variables however I want. Here's a short snippet of the html, to have an idea of how jquery grabs it. <div id="time"> <h1>Time</h1> <div name="minute" class="time" id="t_minute"> M : <ul> The full time html is here: link text Thanks everyone! I've been using SO to answer many questions I've had, but I couldn't find something for this, so I figured I would join, since I'm sure I will have more questions along the way.

    Read the article

  • Best way and problems when using ajax tabs with an MVC PHP project

    - by Jonathan
    Hi, I'm building an IMDB.com like website using PHP/jQuery and a MVC approach (no OOP). I have an index.php base controller to 'rule them all' :), a controllers folder with all the controllers, a models folder and a view folder. In some pages of the website I have tabbed navigation, when the visitor clicks on one of those tabs to get more information, jQuery gets that data using the $.post or $.get method and shows it on the tab container, obviously without refreshing the page. The problem is that those pages loaded by ajax are also generated using controllers, models, and views, and the things are getting a bit complicated for someone like me ( = 'no experience'). To dynamically get the data I some times need to include a model twice, include an include in an include in an include, send information multiple times, connect with the database again, and all sort of things like that and I'm sure there is a better and prettier way to do this. I'm searching for the best approach and common methods for this. I have no experience working with a big project like this. This is a personal project so I have full control and every answer is welcome. Thanks!!!

    Read the article

  • Manually extracting portions of strings contained in a list (parsing)

    - by user1652011
    I'm aware that there are modules that fully simplify this function, but saying that I am running from a base install of python (standard modules only), how would I extract the following: I have a list. This list is the contents, line by line, of a webpage. Here is a mock up list (unformatted) for informative purposes: <script> link = "/scripts/playlists/1/" + a.id + "/0-5417069212.asx"; <script> "<a href="/apps/audio/?feedId=11065"><span class="px13">Eastern Metro Area Fire</span>" From the above string, I need the following extracted. The feedId (11065), which is incidentally a.id in the code above., "/scripts/playlists/1/" and "/0-5417069212.asx". Remembering that each of these lines is just contents from objects in a list, how would I go about extracting that data? Here is the full list: contents = urllib2.urlopen("http://www.radioreference.com/apps/audio/?ctid=5586") Pseudo: from urllib2 import urlopen as getpage page_contents = getpage("http://www.radioreference.com/apps/audio/?ctid=5586") feedID = % in (page_contents.search() for "/apps/audio/?feedId=%") titleID = % in (page_contents.search() for "<span class="px13">%</span>") playlistID = % in (page_contents.search() for "link = "%" + a.id + "*.asx";") asxID = * in (page_contents.search() for "link = "*" + a.id + "%.asx";") streamURL = "http://www.radioreference.com/" + playlistID + feedID + asxID + ".asx" I plan to format it as such that streamURL should = : http://www.radioreference.com/scripts/playlists/1/11065/0-5417067072.asx

    Read the article

  • Python list recursion type error

    - by Jacob J Callahan
    I can't seem to figure out why the following code is giving me a TypeError: 'type' object is not iterable pastebin: http://pastebin.com/VFZYY4v0 def genList(self): #recursively generates a sorted list of child node values numList = [] if self.leftChild != 'none': numList.extend(self.leftChild.genList()) #error numList.extend(list((self.Value,))) if self.rightChild != 'none': numList.extend(self.rightChild.genList()) #error return numList code that adds child nodes (works correctly) def addChild(self, child): #add a child node. working if child.Value < self.Value: if self.leftChild == 'none': self.leftChild = child child.parent = self else: self.leftChild.addChild(child) elif child.Value > self.Value: if self.rightChild == 'none': self.rightChild = child child.parent = self else: self.rightChild.addChild(child) Any help would be appreciated. Full interpreter session: >>> import BinTreeNode as BTN >>> node1 = BTN.BinaryTreeNode(5) >>> node2 = BTN.BinaryTreeNode(2) >>> node3 = BTN.BinaryTreeNode(12) >>> node3 = BTN.BinaryTreeNode(16) >>> node4 = BTN.BinaryTreeNode(4) >>> node5 = BTN.BinaryTreeNode(13) >>> node1.addChild(node2) >>> node1.addChild(node3) >>> node1.addChild(node4) >>> node1.addChild(node5) >>> node4.genList() <class 'list'> >>> node1.genList() Traceback (most recent call last): File "<interactive input>", line 1, in <module> File "C:...\python\BinTreeNode.py", line 47, in genList numList.extend(self.leftChild.genList()) #error File "C:...\python\BinTreeNode.py", line 52, in genList TypeError: 'type' object is not iterable

    Read the article

  • APC decreasing php performance??? (php 5.3, apache 2.2, windows vista 64bit)

    - by M.M.
    Hi, I have an Apache/2.2.15 (VC9) and PHP/5.3.2 (VC9 thread safe) running as an apache module on Vista 64bit machine. All running fine. Project that I'm benchmarking (with apache's ab utility) is basically standard Zend Framework project with no db connection involved. Average (median) apache response is about 0.15 seconds. After I've installed APC (3.1.4-dev VC9 thread safe) with standard settings suddenly the request response time raised to 1.3 seconds (!), which is unacceptable... All apc settings looked always good (through the apc.php script: enough shm memory, no cache full, fragmentation 0%). Only difference was to disable the stats lookup (apc.stat = 0). Then the response dropped to 0.09 seconds which was finally better than without the apc. IIRC, it's expected and obvious that the stat lookup creates some overhead, but shouldn't it still be far more performant compared to running wihout the apc extension at all? Or put it differently why is the apc.stat creating so much overhead? Apparently, something is not working as it should, I don't really know where to start looking. Thank you for your time/answers/direction in advance. Cheers, m.

    Read the article

  • Ways to support manually executed tests? (that can be used on a Mac)

    - by Rinzwind
    Are there any tools that can be used on a Mac to support manually executed tests? I have a number of tests that I'm executing manually and which I'm currently documenting using merely a plain text file. "Tools" can be interpreted rather loosely here, anything that's a step up from the plain text file would be useful: a template for some suitable application, supporting AppleScript scripts, a web-based system, a full-blown application ... Some things that would be great to have better support for (see also the example below): Checking off each step while you're manually executing the test. Showing the next step(s) in a small window that is always kept in front of all other windows. Automatically updating the 'last tested' and 'using svn revision' info. Keeping a record of all previous testing rounds (not just the last one). ... Any suggestions for any such "tools" that can be used on a Mac? An example (faked) entry from the plain text file to give you a better idea of what I'm looking for: - Check that exported web pages render properly in Safari. Last tested: 2010-03-24 Using SVN revision: 1000 Steps: - Open a new document. - Add some items to the document. - Export the document to a web page "Test.html" in a new folder "Export Test" on the Desktop. - Open the web page in Safari, script: tell application "Finder" open file "Test.html" of folder "Export Test" of desktop end tell Expected results: - The web page should appear properly with all items shown. Clean up steps: - Remove the folder "Export Test" from the Desktop. ( Note: for those unaware, the snippet of AppleScript in the above can be executed from most text editing applications through the Services menu by selecting the snippet and using: the application menu Services Script Editor Run as AppleScript. This is quite useful to automate some steps for tests that are difficult to automate as a whole. )

    Read the article

  • Optimising ruby regexp -- lots of match groups

    - by Farcaller
    I'm working on a ruby baser lexer. To improve performance, I joined up all tokens' regexps into one big regexp with match group names. The resulting regexp looks like: /\A(?<__anonymous_-1038694222803470993>(?-mix:\n+))|\A(?<__anonymous_-1394418499721420065>(?-mix:\/\/[\A\n]*))|\A(?<__anonymous_3077187815313752157>(?-mix:include\s+"[\A"]+"))|\A(?<LET>(?-mix:let\s))|\A(?<IN>(?-mix:in\s))|\A(?<CLASS>(?-mix:class\s))|\A(?<DEF>(?-mix:def\s))|\A(?<DEFM>(?-mix:defm\s))|\A(?<MULTICLASS>(?-mix:multiclass\s))|\A(?<FUNCNAME>(?-mix:![a-zA-Z_][a-zA-Z0-9_]*))|\A(?<ID>(?-mix:[a-zA-Z_][a-zA-Z0-9_]*))|\A(?<STRING>(?-mix:"[\A"]*"))|\A(?<NUMBER>(?-mix:[0-9]+))/ I'm matching it to my string producing a MatchData where exactly one token is parsed: bigregex =~ "\n ... garbage" puts $~.inspect Which outputs #<MatchData "\n" __anonymous_-1038694222803470993:"\n" __anonymous_-1394418499721420065:nil __anonymous_3077187815313752157:nil LET:nil IN:nil CLASS:nil DEF:nil DEFM:nil MULTICLASS:nil FUNCNAME:nil ID:nil STRING:nil NUMBER:nil> So, the regex actually matched the "\n" part. Now, I need to figure the match group where it belongs (it's clearly visible from #inspect output that it's _anonymous-1038694222803470993, but I need to get it programmatically). I could not find any option other than iterating over #names: m.names.each do |n| if m[n] type = n.to_sym resolved_type = (n.start_with?('__anonymous_') ? nil : type) val = m[n] break end end which verifies that the match group did have a match. The problem here is that it's slow (I spend about 10% of time in the loop; also 8% grabbing the @input[@pos..-1] to make sure that \A works as expected to match start of string (I do not discard input, just shift the @pos in it). You can check the full code at GH repo. Any ideas on how to make it at least a bit faster? Is there any option to figure the "successful" match group easier?

    Read the article

  • How to ensure nginx serves a request from an external IP?

    - by Matt
    I have a strange situation, where my nginx setup stopped handling external requests. I'm pretty stuck. If I hit the domain without a subdomain, I properly get redirected, however, if I request the full url, that fails and doesn't log anything, anywhere. I am able to curl localhost on the server itself, however when I attempt to curl from an external machine, it fails with: curl: (7) couldn't connect to host I've also noticed that bots can get through, I've seen Google hit the log every now and then. My nginx.conf file: upstream mongrels { server 127.0.0.1:5000; } server { listen 80; server_name culini.com; rewrite ^/(.*) http://www.culini.com/$1 permanent; } # the server directive is nginx's virtual host directive. server { # port to listen on. Can also be set to an IP:PORT listen 80; # Set the max size for file uploads to 50Mb client_max_body_size 50M; # sets the domain[s] that this vhost server requests for server_name www.culini.com; # doc root root /var/www/culini/current/public; log_format app '$remote_addr - $remote_user [$time_local] ' '"$request" $status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for" [$upstream_addr $upstream_response_time $upstream_status]'; # vhost specific access log access_log /var/www/culini/current/log/nginx.access.log app; error_log /var/www/culini/current/log/nginx.error.log debug; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect false; proxy_max_temp_file_size 0; proxy_intercept_errors on; proxy_ignore_client_abort on; if (-f $request_filename) { break; } if (!-f $request_filename) { proxy_pass http://mongrels; break; } } } Please, please, any help would be greatly appreciated.

    Read the article

  • Remoting connection over TCP

    - by Voyager Systems
    I've got a remoting server and client built. The server is set up as such: BinaryServerFormatterSinkProvider serverProv = new BinaryServerFormatterSinkProvider(); serverProv.TypeFilterLevel = TypeFilterLevel.Full; BinaryClientFormatterSinkProvider clientProv = new BinaryClientFormatterSinkProvider(); IDictionary props = new Hashtable(); props["port"] = port; TcpChannel channel = new TcpChannel( props, clientProv, serverProv ); ChannelServices.RegisterChannel( channel, false ); RemotingConfiguration.RegisterWellKnownServiceType( typeof( Controller ), "Controller", WellKnownObjectMode.Singleton ); The client is set up as such: ChannelServices.RegisterChannel( new TcpChannel( 0 ), false ); m_Controller = (Controller)RemotingServices.Connect( typeof( Controller ), "tcp://" + ip + ":2594/Controller" ); When I try to connect to the server from the same computer with the IP specified as 'localhost,' it connects fine. However, when I try to connect from a remote computer, not on the LAN, given the server's IP address, I receive the following exception on the client after a long wait: A connection attempt failed because the connected party did not properly respond after a period of time How can I resolve this? I'm sure it's a configuration problem because the ports are forwarded properly on the server and there is no firewall active. Thanks

    Read the article

< Previous Page | 446 447 448 449 450 451 452 453 454 455 456 457  | Next Page >