Search Results

Search found 30912 results on 1237 pages for 'load path'.

Page 451/1237 | < Previous Page | 447 448 449 450 451 452 453 454 455 456 457 458  | Next Page >

• Intel Motherboard Lightning Victim Dies Hard

  - by Stetson RDT

  Today, I have a more hardware-related question. I have an Intel board, and I really do not know which board it is, I built the machine for a relative, but he forgot to keep the documentation. Long story short, the computer was disconnected during a lightning storm, but a lightning strike travelled in via the ethernet cable (It was directly connected to a power brick commonly seen on those long distance ISP Wireless transmitters), and the motherboard was shocked. I am attempting to get this PC going. The problem is as follows: The computer will randomly reboot, just in the middle of anything as it pleases. May load to EFI (or whatever BIOS is nowadays), may load to bootloader, may even get to the OS. But before 5 minutes is up, the system will always die. Out of curiosity, I plugged my voltmeter in to a molex connector. On the 5V side, it gets a good, consistant +5.13V. On the 12V side, it fluctuates, as follows: Upon immediate startup, it soars to 12.11-12.13V. It will now do one of two things: it will immediately jump down to 12.04-12.05V, or hover for about a minute at 12.11-12.13, then jump down. It seems the longer the voltage stays at 12.11-12.13, the shorter the machine will stay running. Also, post codes, whenever the machine locks up, but does not die hard, seem to be between "AA" and "AC". Does this make any sense to anybody? Do you all think this motherboard is salvageable? It was an expensive bugger, and I'd prefer to not replace it.

  Read the article

• How to safely move where itunes saves music/iphone apps/and meta data to another internal Drive?

  - by GingerLee

  In the past, when I have moved my itunes data from one computer to another, I usually just follow these steps: Copy the contents of two folders: %USERPROFILE%\Music\iTunes %USERPROFILE%\AppData\Roaming\Apple Computer 1) Install iTunes on the new computer, start it and close it (don't let it search for music). 2) Copy all the files in the above folders from old PC to new PC. 3) Start iTunes and authorize the new computer (and deauthorize old one). 4) Before syncing, update all iphone apps to current versions on both my iphone and in itunes. 5) The Sync. The above steps always work for me, and basically Itunes on my new PC works exactly as it did on the old PC. My Question: In the hopes of bybassing the above steps in the future, I would like to just have Itunes use another internal Drive that I use for file storage (e.g. D:/) as the path for the above two directory? Then if I move to new PC again, I could just setup itunes to use the correct path. Is that possible yet with minimal implications? If so how?

  Read the article

• deploy git project and permission issue

  - by nixer

  I have project hosted with gitolite on my own server, and I would like to deploy the whole project from gitolite bare repository to apache accessible place, by post-receive hook. I have next hook content echo "starting deploy..." WWW_ROOT="/var/www_virt.hosting/domain_name/htdocs/" GIT_WORK_TREE=$WWW_ROOT git checkout -f exec chmod -R 750 $WWW_ROOT exec chown -R www-data:www-data $WWW_ROOT echo "finished" hook can't be finished without any error message. chmod: changing permissions of `/var/www_virt.hosting/domain_name/file_name': Operation not permitted means that git has no enough right to make it. The git source path is /var/lib/gitolite/project.git/, which is owned by gitolite:gitolite And with this permissions redmine (been working under www-data user) can't achieve git repository to fetch all changes The whole project should be placed here: /var/www_virt.hosting/domain_name/htdocs/, which is owned by www-data:www-data. What changes I should do, to work properly post-receive hook in git, and redmine with repository ? what I did, is: # id www-data uid=33(www-data) gid=33(www-data) groups=33(www-data),119(gitolite) # id gitolite uid=110(gitolite) gid=119(gitolite) groups=119(gitolite),33(www-data) does not helped. I want to have no any problem to work apache (to view project), redmine to read source files for project (under git) and git (doing deploy to www-data accessible path) what should I do ?

  Read the article

• Mounting fuse sshfs fails when invoked by Cron on FreeBSD 9.0

  - by Tal

  I have a remote server filesystem that I'm attempting to mount locally on a FreeBSD 9 machine via FUSE sshfs, and Cron for a backup routine. I have ssh keys between the boxes setup to allow for passwordless login as the root user on the local machine. Cron is set to run the following script (in Root's crontab): #!/bin/sh echo "Mounting Share" /usr/local/bin/sshfs -C -o reconnect -o idmap=user -o workaround=all <remote user>@<remote domain>.com: /mnt/remote_server As root, I can run this script on the command line without issue, and without being asked for a password the share mounts successfully. Yet, when run by Cron the script fails. The path to sshfs is identical to the value of which sshfs Here is the email root receives from the Cron Daemon: X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <HOME=/root> X-Cron-Env: <PATH=/usr/bin:/bin> X-Cron-Env: <LOGNAME=root> X-Cron-Env: <USER=root> Mounting Share fuse: failed to exec mount program: No such file or directory fuse: failed to mount file system: No such file or directory I'm stumped as to why I'm receiving No such file or directory in this instance. It further seems odd given that the paths appear to be correct. I've also attempted to compare the output of env on the shell with env inserted into the script. I don't see any environment variables that should cause this trouble. At bootup, FUSE reports its version as: fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 Help me ServerFault wizards, you're my only hope!

  Read the article

• PST backup with Volume Shadow Copy Service

  - by NoMadMan

  I was asked to implement the task of backing up 35 PST files ranging from 800Mb to 2000Mb. Windows XP and Windows 2000 workstations are assigned to the users and we have a Windows 2000 domain controller we use to back up files on 3x 500Gb external hard drives. I found several methods from applications to scripts. Local or remote applications would be my last resort. I came across this script based on Volume Shadow Copy Service. CopyWithVss I wanted to know if there would be a problem if the path had spaces. Would mounting the destination path of each PST folder with a drive letter be more practical? My concern with mounting option is that i would eventually run out of letters since I have 35 and possibly more workstations to back up. Lastly, can someone give me an example of CopyWithVss if it were run on a production network? The script is a bit cryptic even after reading several times. Where in the script do I enter the source and the destination? I'm a Mac user so please excuse my ignorance with Windows platform.

  Read the article

• troubleshooting really slow login on a (linux) machine

  - by Peeter Joot

  Within the last couple of weeks, any attempt to login to a specific linux server has gotten really slow. Once I've logged in, things appear to run without significant delay, but some other login like activities (like starting a new screen session) are slow. The machine's been rebooted a couple of times recently and that hasn't helped. , and it doesn't appear to be $PATH search (where $PATH can sometimes include bad NFS mounts), which I've seen historically in our environment. I've also tried completely removing my .profile/.bash*/... type of init files to rule out anything bad there. I also see slow login for at least one other userid on the system. One thing I've noticed is the following message when trying to exit from a screen terminal: Utmp slot not found -> not removed and am wondering if this is related (having a vague recollection that Utmp has something to do with login). Any idea what that message means, or how to fix it, and if it would be related? Failing that, what sort of problem determination tools are available to investigate what is slowing down this login process?

  Read the article

• S3sync not working

  - by user57833

  Hello, I managed to get s3sync to upload my test folder to Amazon S3 and can see it in the MWS Managment Console. Downloading the data back to a test folder results in the following error message: root@mybucketname:/var/s3sync# ./week_download.sh s3Prefix backups/weekly localPrefix /var/s3sync/testdown/weekly s3TreeRecurse mybucketname backups/weekly Creating new connection Trying command list_bucket mybucketname prefix backups/weekly max-keys 200 delimiter / with 100 retries le ft Response code: 200 prefix found: / s3TreeRecurse mybucketname backups/weekly / Trying command list_bucket mybucketname prefix backups/weekly/ max-keys 200 delimiter / with 100 retries l eft Response code: 200 S3 item backups/weekly/ s3 node object init. Name: Path:backups/weekly Size:0 Tag:d41d8cd98f00b204e9800998ecf8427e Date:Fri O ct 29 14:21:53 UTC 2010 local node object init. Name: Path:/var/s3sync/testdown/weekly/ Size: Tag: Date: source: dest: Update node s3sync.rb:638:in initialize': No such file or directory - /var/s3sync/testdown/weekly/.s3syncTemp (E rrno::ENOENT) from s3sync.rb:638:inopen' from s3sync.rb:638:in updateFrom' from s3sync.rb:393:inmain' from s3sync.rb:735 I am using the following download script: !/bin/bash script to download local directory upto s3 cd /var/s3sync/ export AWS_ACCESS_KEY_ID=nothing to see here export AWS_SECRET_ACCESS_KEY=nothing to see here export SSL_CERT_DIR=/var/s3sync/certs ruby s3sync.rb -r -v -d --progress --make-dirs mybucket:backups/weekly /var/s3sync/testdown copy and modify line above for each additional folder to be synced Any idea's? Does the download script need to download to the source of Amazon S3 i.e testup folder? Was hoping on the instance of a complete failure and the original folders won't exist that it would just download everything from me. Note: changed my bucket names to "mybucketname" so that it is not public!

  Read the article

• How would I write a terminal command to download a folder with wget from a Media Temple (gs) server?

  - by racl101

  I'm trying to download a folder using wget on the Terminal (I'm usin a Mac if that matters) because my ftp client sucks and keeps timing out. It doesn't stay connected for long. So I was wondering if I could use wget to connect via ftp protocol to the server to download the directory in question. I have searched around in the internet for this and have attempted to write the command but it keeps failing. So assuming the following: ftp username is: [email protected] ftp host is: ftp.s12345.gridserver.com ftp password is: somepassword I have tried to write the command in the following ways: wget -r ftp://[email protected]:[email protected]/path/to/desired/folder/ wget -r ftp://serveradmin:[email protected]/path/to/desired/folder/ When I try the first way I get this error: Bad port number. When I try the second way I get a little further but I get this error: Resolving s12345.gridserver.com... 71.46.226.79 Connecting to s12345.gridserver.com|71.46.226.79|:21... connected. Logging in as serveradmin ... Login incorrect. What could I be doing wrong?

  Read the article

• Zabbix doesn't update value from file neither with log[] nor with vfs.file.regexp[] item

  - by tymik

  I am using Zabbix 2.2. I have a very specific environment, where I have to generate desired data to file via script, then upload that file to ftp from host and download it to Zabbix server from ftp. After file is downloaded, I check it with log[] and vfs.file.regexp[] items. I use these items as below: log[/path/to/file.txt,"C.*\s([0-9]+\.[0-9])$",Windows-1250,,"all",\1] vfs.file.regexp[/path/to/file.txt,"C.*\s([0-9]+\.[0-9])$",Windows-1250,,,\1] The line I am parsing looks like below: C: 8195Mb 5879Mb 2316Mb 28.2 The value I want to extract is 28.2 at the end of file. The problem I am currently trying to solve is that when I update the file (upload from host to ftp, then download from ftp to Zabbix server), the value does not update. I was trying only log[] at start, but I suspect, that log[] treat the file as real log file and doesn't check the same lines (althought, following the documentation, it should with "all" value), so I added vfs.file.regexp[] item too. The log[] has received a value in past, but it doesn't update. The vfs.file.regexp[] hasn't received any value so far. file.txt has got reuploaded and redownloaded several times and situation doesn't change. It seems that log[] reads only new lines in the file, it doesn't check lines already caught if there are any changes. The zabbix_agentd.log file doesn't report any problem with access to file, nor with regexp construction (it did report "unsupported" for log[] key, when I had something set up wrong). I use debug logging level for agent - I haven't found any interesting info about that problem. I have no idea what I might be doing wrong or what I do not know about how Zabbix is performing these checks. I see 2 solutions for that: adding more lines to the file instead of making new one or making new files and check them with logrt[], but those doesn't satisfy my desires. Any help is greatly appreciated. Of course I will provide additional information, if requested - for now I don't know what else might be useful.

  Read the article

• How can see what processes makes my server slow?

  - by Steven

  All my websites on my server are extremely slow or not loading at all. Even server admin (Plesk) will not load some times. There's been no changes to the sites for the last coupple of months. How can I see what processes is making my server slow? My environment looks like this: Server: VPS running Linux 2.8.x OS: Centos 5 Manage interface: Plesk 9.x Memmory: 1024MB CPU: 2.2GHz My websites run on PHP and MySQL. I finally managed to telnet (Putty + SSH) in to my server. Running top did not show any processes using more than max 2% CPU and none were using exesive memmory. I also got a friend to install a program that checks the core files, and all seemed fine. So I'm leaning towards network issues or some other server malfunction. But I'm not able to find out what can be wrong. Here are some answers to Sean Kimball: I don't run mail services on my server yet There are noe specific bandwidth peaks. Prefork looks like this <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 </IfModule> Not sure what you mean with DNS question. But I think it's up and running. There are no processes running wild Where can I find avarage load? Telnet is disabled and I have to log in using SSH :)

  Read the article

• Computer Won't Boot Properly, unless in safe mode?

  - by Mr_CryptoPrime

  I bought a computer today and booted it up, but when I did I only got a blank screen. I checked to make sure it wasn't the monitor by connecting it to my old computer...it worked. I then tried connecting my monitor to both DVI ports and found that the bottom one did work. However, now it just boots up and says "loading windows" and then when the login screen is suppose to come up the screen just goes blank and monitor says "no input, check cord" (or something like that). I tried reinstalling windows and then I was able to log on normally. I used the CD's and reinstalled all the drivers, then rebooted...now I am stuck right back where I started. I tried taking out the RAM and inserting into different slots, that didn't fix anything. I was able to boot up into windows using safe-mode. I suspected that my ATI Radeon 6950 was the issue and downloaded the drivers, but I can't install them on safe-mode. Someone said to install C++ distr. and I tried doing that to fix driver installation problem of "failed to load detection driver" but it wouldn't let me do that either. Please someone help me, I don't want to have to deal with the evil redtape of sending it back to get a replacement! My computer: -Content--text-_-"http://www.newegg.com/Product/Product.aspx?Item=N82E16883229236&nm_mc=TEMC-RMA-Approvel&cm_mmc=TEMC-RMA-Approvel--Content--text-_- Driver detection problem: http://www.hardwareheaven.com/hardwareheaven-tools-discussion/174912-failed-load-detection-driver-installation-error.html Driver download page: http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx#1 I am using windows 7. Thanks again.

  Read the article

• linux automatic change permissions in resolv.file

  - by rikr

  In various linux servers I see how the permissions of the /etc/resolv.conf file change automatically. In state normal: -r--r--r-- 1 root root 103 Jul 4 11:50 resolv.conf In changed state: -r--r----- 1 root root 103 Jul 4 11:50 resolv.conf I installed auditd for monitoring it, and these are the two entries between the change: type=PATH msg=audit(07/04/2012 12:20:02.719:303) : item=0 name=/etc/resolv.conf inode=137102 dev=fe:00 mode=file,644 ouid=root ogid=root rdev=00:00 type=CWD msg=audit(07/04/2012 12:20:02.719:303) : cwd=/ type=SYSCALL msg=audit(07/04/2012 12:20:02.719:303) : arch=x86_64 syscall=open success=yes exit=3 a0=7feeb1405dec a1=0 a2=1b6 a3=0 items=1 ppid=1585 pid=3445 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=(none) ses=4294967295 comm=hostid exe=/usr/bin/hostid key=(null) type=PATH msg=audit(07/04/2012 12:50:03.727:304) : item=0 name=/etc/resolv.conf inode=137102 dev=fe:00 mode=file,440 ouid=root ogid=root rdev=00:00 type=CWD msg=audit(07/04/2012 12:50:03.727:304) : cwd=/ type=SYSCALL msg=audit(07/04/2012 12:50:03.727:304) : arch=x86_64 syscall=open success=yes exit=3 a0=7f2bcf7abdec a1=0 a2=1b6 a3=0 items=1 ppid=1585 pid=3610 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=(none) ses=4294967295 comm=hostid exe=/usr/bin/hostid key=(null) any ideas?

  Read the article

• Is there any functional-like unix shell?

  - by Caruccio

  I'm (really) newbie to functional programming (in fact only had contact with it using python) but seems to be a good approach for some list-intensive tasks in a shell environment. I'd love to do something like this: $ [ git clone $host/$repo for repo in repo1 repo2 repo3 ] Is there any Unix shell with these kind of feature? Or maybe some feature to allow easy shell access (commands, env/vars, readline, etc...) from within python (the idea is to use python's interactive interpreter as a replacement to bash). EDIT: Maybe a comparative example would clarify. Let's say I have a list composed of dir/file: $ FILES=( build/project.rpm build/project.src.rpm ) And I want to do a really simple task: copy all files to dist/ AND install it in the system (it's part of a build process): Using bash: $ cp ${files[*]} dist/ $ cd dist && rpm -Uvh $(for f in ${files[*]}; do basename $f; done)) Using a "pythonic shell" approach (caution: this is imaginary code): $ cp [ os.path.join('dist', os.path.basename(file)) for file in FILES ] 'dist' Can you see the difference ? THAT is what i'm talking about. How can not exits a shell with these kind of stuff build-in yet? It's a real pain to handle lists in shell, even its being a so common task: list of files, list of PIDs, list of everything. And a really, really, important point: using syntax/tools/features everybody already knows: sh and python. IPython seams to be on a good direction, but it's bloated: if var name starts with '$', it does this, if '$$' it does that. It's syntax is not "natural", so many rules and "workarounds" ([ ln.upper() for ln in !ls ] -- syntax error)

  Read the article

• vmware player won't run on CentOS due to missing /dev/vmmon, what could be the problem?

  - by Graphics Noob

  So I've tried installing vmware player 3.1.4 and 3.1.3 and both times had the same problem, when I try to load a VM I get the error "Could not open /dev/vmmon". When I ls /dev/ I can see there is no "vmmon" device present. When I try running: sudo /etc/init.d/vmware start I get the output: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [FAILED] which shows that the Virtual Machine Monitor fails to load. I tried following the advice on this site and ran vmware-modconfig --console --install-all I notice during the compilation there are no errors, but at the end I get the message: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [ OK ] Unable to start services Out of curiousity I tried: sudo /sbin/insmod /lib/modules/2.6.18-238.9.1.el5xen/misc/vmmod.ko But got the error message: insmod: error inserting 'vmmon.ko': -1 Invalid module format I have a feeling this may be the root of the problem, but I don't know what could be causing it or how to fix it.

  Read the article

• Apache2 doesn't serve PHP-scripts correctly [closed]

  - by cmbrnt

  I've run into a problem with my Apache 2.2.16 configuration, running on Debian Squeeze. The problem is that it stopped serving PHP5-scripts completely. When I try to access the sites with Google Chrome, it instead downloads a file called "download", which contains the contents of the script. This is of course not a good thing. It does serve common html-files perfectly... I've been at this for quite a while now, and after all the googling and troubleshooting, I thought it would be a good time to ask you guys. Here's what I've got: The php5 and libapache2-mod-php5 packages are installed /etc/apache2/mods-available contains both php5.load and php5.conf, and these are symlinked from the mods-enabled directory The /etc/php5/ directory is left untouched since the installation. Here's the contents of /etc/apache2/mods-available/php.load: LoadModule php5_module /usr/lib/apache2/modules/libphp5.so And /etc/apache2/mods-available/php.conf: <IfModule mod_php5.c> <FilesMatch "\.ph(p3?|tml)$"> SetHandler application/x-httpd-php </FilesMatch> <FilesMatch "\.phps$"> SetHandler application/x-httpd-php-source </FilesMatch> <IfModule mod_userdir.c> <Directory /home/*/public_html> php_admin_value engine Off </Directory> </IfModule> </IfModule> What am I missing? This is a server with modified virtual hosts and the like, so I might have changed some settings which causes this problem, but simply purging and reinstalling is not an option so far, since the configuration is quite extensive. Any help would be great. Thanks.

  Read the article

• How do I setup routing for two companies with different Internet connections on the same LAN?

  - by Clint Miller

  Here's the setup: Two companies (A & B) share office space and a LAN. A 2nd ISP is brought in and company A wants its own Internet connection (ISP A) and company B wants its own Internet connection (ISP B). VLANs are deployed internally to separate the two companies' networks (company A: VLAN 1, company B: VLAN 2, shared VOIP: VLAN 3). With separate VLANs it's simple enough to use separate DHCP servers (or separate scopes on the same server) to assign the default gateway to each company's gateway for their Internet connection. Static routes can be created on each gateway to point traffic destined for the other company's VLAN or the voice VLAN so that all nodes are reachable as expected. However, I think this is a form of asymmetrical routing, right? (The path from node A1 to node B1 is not the same as the path back from node B1 to node A1). Can I set up policy-based routing to correct this? In that case, can I assign the same default gateway to every device on all VLANs and create a routing policy on a L3 switch to look at the source address and forward traffic to the appropriate next hop? In that case, I want the routing logic to go like this: If the destination address is known, forward the traffic (traffic destined for a different VLAN). If the destination address is unknown, forward the traffic to ISP A's gateway if the source address is on VLAN A; or forward the traffic to ISP B's gateway if the source address is VLAN B. Am I thinking about this problem in the correct way? Is there another way to solve this problem that I am overlooking?

  Read the article

• How expensive is a hostname in htaccess? Other solutions possible?

  - by Nanne

  For easy allow or disallowing of dynamic IP-adresses you can add them as a hostname in a .htaccess file. As I have read from: .htaccess allow from hostname? it does a reverse lookup on the connecting ip address, seeing if the response matches the allowed name. (Well, actually Apache is doing a double lookup, first a reverse lookup and then a forward lookup on the result of the reverse.) This is the reason we are currently not using dynamic-ip hostnames in the .htaccess: this "sounds" quite heavy: 2 extra lookups for every request. Is this indeed quite heavy, and would a reasonably busy server that is rather looking for less then more load get away with this :)? (e.g.: how does this 'load' compare to the rest? If a request is 1000 times more expensive then the lookups it might be negligible. otoh, it could be that final straw :) ) Are there other solutions? I can write a script that does a lookup of the hostname and put it in .htaccess files ofcourse, but this feels a bit like a hack.

  Read the article

• Subversion COPY/MOVE - File not found: transaction 'XXX-XX'

  - by theplatz

  I'm attempting to create a branch in one of my subversion repositories and keep running into an error. No mater what is done, I keep getting the following: File not found: transaction '3062-2e6', path '/Software/XXXXXX/branches/testbranch' I've noticed that the first part of the '3063-3e6' in the above message is the last successful committed revision in the repository. My apache logs don't give much more information: [Wed Nov 24 14:10:38 2010] [error] [client x.x.x.x] Could not MOVE/COPY /svn/p070361/!svn/bc/3049/Software/SXXXXXX/trunk. [404, #0] [Wed Nov 24 14:10:38 2010] [error] [client x.x.x.x] Unable to make a filesystem copy. [404, #160013] [Wed Nov 24 14:10:38 2010] [error] [client x.x.x.x] File not found: transaction '3059-2e2', path '/Software/XXXXXX/branches/testbranch' [404, #160013] This is all happening on a server with an nginx frontend that proxies to Apache for the subversion bits. Other repositories are able to branch fine and I was able to create the branch using file:/// from the command line on the server this is occurring on. The permissions on this repository match every other repository and disk space is not an issue.

  Read the article

• Samba access works with IP address only

  - by Sebastian Rittau

  I added a Debian etch host (hostname: webserver, IP address: 192.168.101.2) running Samba to a Windows network with a Windows 2003 PDC (IP address 192.168.101.3). The Samba server exports a public guest share, called "Intranet". The server shows up fine in the network, but trying to click on it produces an error dialog, stating I don't have the necessary permissions. So does entering \webserver manually and using \webserver\internet states that the path does not exist. Interestingly, accessing the share by IP address (\192.168.101.2 or \192.168.101.2\intranet) works fine. DNS is configured correctly, and "smbclient //webserver/intranet" on another Linux client works fine. One complicating issue is that the webserver is only a VMware virtual machine running on PDC server. Here is our smb.conf: [global] workgroup = Foobar server string = Webserver wins support = yes ; commenting out these wins server = 192.168.101.3 ; two lines has no effect dns proxy = no guest account = nobody [... snipped some unrelated bits, like logging ...] security = share [... snipped some password-related things ...] domain master = no [intranet] comment = Intranet path = /srv/webserver/contents browseable = yes guest ok = yes guest only = yes read only = yes create mask = 0775 directory mask = 0775

  Read the article

• IIS Web Farm Framework servers are automatically set to "unavailable" even when they are healthy... And they never return to the available state!

  - by JohannesH

  I have 2 web farm configurations, one with 2 member servers and one with 3 member servers. I have health monitoring set up on both farms and the monitoring tool reports all servers as being healthy. However after a while all the servers are marked as being "Unavailable" and "Healthy" in the "Monitoring and Management" screen (in the "Servers" screen they are all listed with "Yes" in the "Ready for Load Balancing" column). Viewing the event log on both the web farm controller or any of farm servers doesn't reveal anything interesting. there are no warnings or errors in the period where the servers became unavailable. There are a couple of informational events about the worker process getting shut down due to inactivity but I don't hope this is the cause since that would mean that the farms will die during the night when the load is low. Am I missing something? EDIT: Btw, I think its very odd that the application pool shuts down on the servers since the health monitoring system is polling an aspx page on each server. Shouldn't that keep them going? EDIT2: Now I've also experienced this problem with the RTW version of Web Farm Framework 2.

  Read the article

• Route outbound connections from local network through VPN

  - by Sharkos

  I have a server A running OpenVPN, an OpenVPN client B (a rooted Android phone as it happens) and a third party C (a laptop, tablet etc.) tethered to B. B can use the VPN to access the internet via A; C can use the tethered connection WITHOUT the VPN to access the internet via B. However, with the VPN on B active, I cannot load information from the internet on C. A appears to log similar traffic inbound and outbound when B or C attempt to load a webpage, say, but the VPN on device B reports no inbound traffic when the connection originated from C. Where should I look for packets being dropped, and what ip rules should I use to make sure they are passed back through the VPN and into the local network B <- C? (I'll obviously post whatever further information is needed.) Further info Without VPN: root@android:/ # ip route default via [B's External Gateway] dev rmnet0 [B's External Subnet] dev rmnet0 proto kernel scope link src [B's External IP] [B's External Gateway] dev rmnet0 scope link 192.168.43.0/24 dev wlan0 proto kernel scope link src 192.168.43.1 With VPN: root@android:/ # ip route 0.0.0.0/1 dev tun0 scope link default via [B's External Gateway] dev rmnet0 [B's External Subnet] dev rmnet0 proto kernel scope link src [B's External IP] [B's External Gateway] dev rmnet0 scope link [External address of A] dev tun0 scope link 128.0.0.0/1 dev tun0 scope link 172.16.0.0/24 dev tun0 scope link 172.16.0.8/30 dev tun0 proto kernel scope link src 172.16.0.10 192.168.43.0/24 dev wlan0 proto kernel scope link src 192.168.43.1 192.168.168.0/24 dev tun0 scope link

  Read the article

• System Issues and Major Malfuctions after Failed hibernation Exit

  - by Sarah Seguin

  I have a HP G71-340US that went into hibernation mode for a while and when I tried coming out of it, I got an error message: You're computer cannot come out if hibernation . Status: 0xc000009a Info: A fatal error occurred processing the restoration data. File: \hiberfil.sys Any information that was not saved before the computer went into hybernation will be lost enter=continue So I hit continue and it ran soooo super slow it. It was seriously crawling. Finally I gave up and turned it off manually (IE press and hold the button). It's been a week or two since then and EVERY SINGLE TIME I have tried to to do ANYTHING it takes forever. When I say forever, I literally mean takes 5-7 minutes to load the internet, then the page itself, then to click a link, so on so forth. Eventually everything just goes not responding and I have to give up (4-6 HOURS later). I also cannot access my thumb/jump drives once I've managed to load windows. I was going to try runing malware bytes incase of a virus, but it's windows explorer developes errors and goes not responding on me. Currently I'm running scan disk or check disk and like every file is coming back unreadable. I let it run the last 2 hours straight in chkdesk and I'm only at 6 percent with around 500+ errors and still going. Yes, I've taken logs of the errors via cell phone camera and patience. A week or two prior to this happening I had to change our the hard drive due to blunt force trama next to the mouse. OH! Running on Windows 7: ) And I've tried loading the computer in safe mode and it makes absolutely no difference. Any and all help would be appreciated. I really don't know what to do from here and I'm kind of freaking out. I've googled different part of the error and things that I've done/seen and there are so many different answers/topics that I thought it best to just post the questions.

  Read the article

• pgpool2+streaming replication failover on only 2 servers?

  - by aneez

  I am trying to configure pgpool2 and postgresql 9.1 to handle failover. I currently have streaming replication running, and are using pgpool2 for read-only load balancing. I have 2 servers in my setup, both running postgresql - 1 master and 1 slave. The master is also running pgpool2. My question is how do I configure this setup to handle failover? Specifically in the case that the master crashes, and the slave has to take over and run pgpool2 as well. Most documentation and examples I have been able to find assumes that pgpool2 is running on a separate server and thus "never" crashes. I may or may not be attacking the problem using the wrong tools. In my production setup I have a total of 3 identical servers all in independent locations. The main goal of the setup is to achieve a high uptime. Thus failover should be automatic, and bringing a failed node back up should cause only minimal downtime. I want all 3 nodes to be as close to identical as possible, and be able to run with just 1 or 2 nodes available. And if possible I want to use load balancing to improve performance. If anyone can help me gain some insight into how to do this using my current setup or suggest a different/better setup. Thank you!

  Read the article

• UEFI boot options gone

  - by user1797930

  I ran into some issues booting Windows after trying to make a complete backup of the disc. After searching for information about some of the error codes, I found advise to change some BIOS settings, but instead I thought I would just "restore defaults" to make sure all settings were set as originally intended. After doing so, all UEFI boot options except for "Windows Boot Manager" are gone. That means, including the CD/DVD drive, so I cannot even boot from a recovery DVD anymore - and as explained, Windows is not able to boot either. Do you have any advice? When I added a secondary drive originally, it was automatically added to the boot options menu. Even when removing and re-adding the drive physically, the option does not appear again. I have tried unplugging power, and hold down start button for 10 seconds, and boot afterwards - no change. It's a laptop so removing CMOS battery is not an option. I have read information that it is an issue with data removed from NVRAM, but I am unable to find a way to recover it. "Add new boot options" requires a path - but the CD/DVD was originally available without any CD's in the drive - so there is no path available to add the drive. I did try to open EFI shell, but it seems not to be embedded in the UEFI/BIOS. It just says "not found". I'm really lost here - any advice is appreciated.

  Read the article

• Why am I getting a Sharepoint error on a simple "hello world" web page?

  - by Fetchez la vache

  I've been granted admin access to an internal IIS server on which I need to set up a web site. Before doing anything technical I wanted to ensure that I could access the server, but when attempting to access a simple page (that does not refer to Sharepoint) at http://localhost/index.html when logged onto the server directly, I am getting Parser Error Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately. Parser Error Message: Could not load file or assembly 'Microsoft.SharePoint' or one of its dependencies. The system cannot find the file specified. Source Error: Line 1: <%@ Assembly Name="Microsoft.SharePoint"%><%@ Application Language="C#" Inherits="Microsoft.SharePoint.ApplicationRuntime.SPHttpApplication" %> Source File: /global.asax Line: 1 Assembly Load Trace: The following information can be helpful to determine why the assembly 'Microsoft.SharePoint' could not be loaded. WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog]. -------------------------------------------------------------------------------- Version Information: Microsoft .NET Framework Version:2.0.50727.5456; ASP.NET Version:2.0.50727.5456 To be quite honest I know zip about Sharepoint, so why am I getting a sharepoint error on a basic "hello world" html page? Cheers :) Update: I've since supposedly uninstalled Sharepoint, but am still getting this error. Any ideas welcome!

  Read the article

< Previous Page | 447 448 449 450 451 452 453 454 455 456 457 458  | Next Page >