Search Results

Search found 41848 results on 1674 pages for 'type signature'.

Page 453/1674 | < Previous Page | 449 450 451 452 453 454 455 456 457 458 459 460  | Next Page >

  • Basic networking: Centos Server Router + Ubuntu Client setup.. unable to access outside world from client

    - by ale
    I am trying to set up my Centos Server with two NICs as a router. eth0 is connected to the outside world and eth1 is connected to an Ubuntu client. Here's eth0 on the server: DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet eth1 on the server: DEVICE=eth1 BOOTPROTO=static IPADDR=192.168.0.10 # a free address on my network ONBOOT=yes TYPE=Ethernet My server has IPv4 packet forwarding turned on and my iptables only contains: # iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE # iptables --append FORWARD --in-interface eth1 -j ACCEPT My Ubuntu client has this in its /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp gateway 192.168.0.10 but I can't get an Internet connection from the server for my client. I can't even ping my server from the client: $ ping 192.168.0.10 Destination Host Unreachable

    Read the article

  • iptables : how to correctly allow incoming and outgoing traffic for certain ports?

    - by Rubytastic
    Im trying to get incoming and outgoing traffic to be enabled on specific ports, because I block everything at the end of the iptables rules. INPUT and FORWARD reject. What would be the appropiate way to open certain ports for all traffic incoming and outgoing? From docs I found below but one has to really define both lines? iptables -A INPUT -i eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT I try to open ports for xmpp service and some other deamons running on server. Rules: *filter # Allow all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT -d 127.0.0.0/8 -j REJECT # Accept all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow all outbound traffic - you can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allow HTTP # Prevent DDOS attacks (http://blog.bodhizazen.net/linux/prevent-dos-with-iptables/) # Disallow HTTPS -A INPUT -p tcp --dport 80 -m state --state NEW -m limit --limit 50/minute --limit-burst 200 -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -m limit --limit 50/second --limit-burst 50 -j ACCEPT -A INPUT -p tcp --dport 443 -j DROP # Allow SSH connections # The -dport number should be the same port number you set in sshd_config -A INPUT -p tcp -s <myip> --dport ssh -j ACCEPT -A INPUT -p tcp -s <myip> --dport 5984 -j ACCEPT -A INPUT -p tcp --dport ssh -j REJECT # Attempt to block portscans # Anyone who tried to portscan us is locked out for an entire day. -A INPUT -m recent --name portscan --rcheck --seconds 86400 -j DROP -A FORWARD -m recent --name portscan --rcheck --seconds 86400 -j DROP # Once the day has passed, remove them from the portscan list -A INPUT -m recent --name portscan --remove -A FORWARD -m recent --name portscan --remove # These rules add scanners to the portscan list, and log the attempt. -A INPUT -p tcp -m tcp --dport 139 -m recent --name portscan --set -j LOG --log-prefix "Portscan:" -A INPUT -p tcp -m tcp --dport 139 -m recent --name portscan --set -j DROP -A FORWARD -p tcp -m tcp --dport 139 -m recent --name portscan --set -j LOG --log-prefix "Portscan:" -A FORWARD -p tcp -m tcp --dport 139 -m recent --name portscan --set -j DROP # Stop smurf attacks -A INPUT -p icmp -m icmp --icmp-type address-mask-request -j DROP -A INPUT -p icmp -m icmp --icmp-type timestamp-request -j DROP -A INPUT -p icmp -m icmp -j DROP # Drop excessive RST packets to avoid smurf attacks -A INPUT -p tcp -m tcp --tcp-flags RST RST -m limit --limit 2/second --limit-burst 2 -j ACCEPT # Don't allow pings through -A INPUT -p icmp -m icmp --icmp-type 8 -j DROP # Log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT

    Read the article

  • =?UTF-8?B??= in Emails sent via php mail problem

    - by Camran
    I have a website, and in the "Contact" section I have a form which users may fill in to contact me. The form is a simple form which action is a php page. The php code: $to = "[email protected]"; $name=$_POST['name']; // sender name $email=$_POST['email']; // sender email $tel= $_POST['tel']; // sender tel $subject=$_POST['subject']; // subject CHOSEN FROM DROPLIST, ALL TESTED $text=$_POST['text']; // Message from sender $text.="\n\nTel:".$tel; // Added to message to show me the telephone nr to the sender at bottom of message $headers="MIME-Version: 1.0"."\n"; $headers.="Content-type: text/plain; charset=UTF-8"."\n"; $headers.="From: $name <$email>"."\n"; mail($to, '=?UTF-8?B?'.base64_encode($subject).'?=', $text, $headers, '[email protected]'); Could somebody please tell me why this works most of the time, but sometimes I receive email whith no text and the subject line showing =?UTF-8?B??= I use outlook express, and I have read this http://stackoverflow.com/questions/454833/system-net-mail-and-utf-8bxxxxx-headers but it didn't help. The problem is not in Outlook, because when I log in to the actual mailprogram where I fetch the POP3 emails from, the email looks the same. When I right click in Outlook and chose "message source" then there is no "From" information. Ex, a good message should look like this: Subject: =?UTF-8?B?w5Z2cmlndA==?= MIME-Version: 1.0 Content-type: text/plain; charset=UTF-8 From: John Doe However, the ones with problem looks like this: Subject: =?UTF-8?B??= MIME-Version: 1.0 Content-type: text/plain; charset=UTF-8 From: As if the information has been lost somewhere. You should know also that I have a VPS, which I manage myself. I use postfix as an emailserver, if thats got anything to do with it. But then again, why does it work sometimes? Also another thing that I have noticed is that sometimes special characters are not shown correctly (by both Outlook and the webmail). For instance, the name "Björkman" in swedish is shown like Björkman, but again, only sometimes. I hope anybody knows something about this problem, because it is very hard to track down for me atleast. If you need more input let me know.

    Read the article

  • NGINX 301 and 302 serving small nginx document body. Any way to remove this behaviour?

    - by anonymous-one
    We have noticed that when using nginx internal 301 and 302 handling, nginx will serve a small document body with the appropriate Location: ... header. Something along the lines of (in html): 301 redirect - nginx. As appropriate in the above behaviour, a content-type text/html and content-length header is also sent. We do a lot of 302 and some 301 redirects, the above behaviour is wasted bandwidth in our opinion. Any way to disable this behaviour? One idea that crossed our mind was to set error_page 301 302 to an empty text file. We have not tested this yet, but I am assuming even with the above, the content-type and content-length (0) headers will be sent. So, is there a clean way to send a "body-less" 301/302 redirect with nginx?

    Read the article

  • Log monitoring using Zabbix

    - by Supratik
    Hi I am monitoring logs using Zabbix. I am trying to monitor a log file using Zabbix 1.8.4. I created an item using the following details: Host: Zabbix server Description: logger_test Type: Zabbix agent (active) Key: log[/tmp/scribetest/test3/test3_current,error,,100] Type of Infromation: Log Update interval (in sec): 1 sec Keep history (in days): 90 Status: Active Applications: Log files I created a trigger and attached it with the item logger_test using the following details. Name: logger_test_trigger Expression: {Zabbix server:log[/tmp/scribetest/test3/test3_current,error,,100].str(error)}=1 Severity: disaster The above settings works fine for the first time but next time the trigger shows ZBX_NOTSUPPORTED and after that item also shows "not supported" message. Can you please tell me if anything I am doing wrong here ? Warm Regards Supratik

    Read the article

  • Avoiding syslog-ng noise from cron jobs [closed]

    - by Eyal Rozenberg
    Possible Duplicate: How can I prevent cron from filling up my syslog? On my small Debian squeeze web server, I have syslog-ng installed. Generally, my logs are nice and quiet, with nice -- MARK -- lines. My syslog, however, is littered with this Sep 23 23:09:01 bookchin /USR/SBIN/CRON[24885]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -delete > /dev/null) Sep 23 23:09:01 bookchin /USR/SBIN/CRON[24886]: (root) CMD ( [ -d /var/lib/php4 ] && find /var/lib/php4/ -type f -cmin +$(/usr/lib/php4/maxlifetime) -print0 | xargs -r -0 rm > /dev/null) Sep 23 23:17:01 bookchin /USR/SBIN/CRON[24910]: (root) CMD ( cd / && run-parts /etc/cron.hourly) kind of garbage. What's the clean way to avoid it?

    Read the article

  • How to quickly start Programs like "regedit.exe" from the Windows 7 search bar using substring match

    - by Palmin
    The search bar in Windows 7 is very convenient to quickly start applications by pressing the Win-key and then entering the name of the application. For applications with a Program Menu entry like Firefox, it is sufficient to type Fire and Firefox will be displayed in the Programs section of the search results. For other applications like regedit.exe, I have to type the full command regedit before the correct choice regedit.exe appears. Is there any way to have regedit.exe appear already when I have just entered a substring? Please note: I have seen Add my applications to Vista’s Start Search, but I don't want to add anything to the Start Menu manually. This question is about if there is some configuration that can be tuned to make the results appear. I have also seen Search behavior of Windows 7 start menu, but my problem is not that the exe appears under Files, regedit.exe correctly appears under Programs, but it should appear already for a substring match.

    Read the article

  • JNDI Datasource definition in Tomcat 6.0

    - by romaintaz
    Hi all, I want to define a DataSource to an Oracle database on my Tomcat 6.0. So, in conf/server.xml (yes, I know that this DataSource will be available for all the webapps in Tomcat, but it's not a problem here), I've set this Resource: <GlobalNamingResources> <Resource name="hibernate/HibernateDS" auth="Container" type="javax.sql.DataSource" url="jdbc:oracle:thin:@myserver:1542:foo" username="foo" password="bar" driverClassName="oracle.jdbc.OracleDriver" maxActive="50" maxIdle="10" validationQuery="select 1 from dual"/> Then, in the web.xml of my application, I set a resource-ref element: <resource-ref> <description>Hibernate Datasource</description> <res-ref-name>hibernate/HibernateDS</res-ref-name> <res-type>javax.sql.DataSource</res-type> <res-auth>Container</res-auth> </resource-ref> Finally, as Hibernate is used to manage the database connection, I have a webapps/mywebapp/WEB-INF/classes/hibernate.cfg.xml that creates a session-factory using the JNDI DataSource: <hibernate-configuration> <session-factory> <property name="connection.datasource">java:comp/env/hibernate/HibernateDS</property> ... However, when I start my Tomcat server, I get an error that says it could not create the INFO [net.sf.hibernate.util.NamingHelper] JNDI InitialContext properties:{} INFO [net.sf.hibernate.connection.DatasourceConnectionProvider] Using datasource: java:comp/env/hibernate/HibernateDS INFO [net.sf.hibernate.transaction.TransactionFactoryFactory] Transaction strategy: net.sf.hibernate.transaction.JDBCTransactionFactory INFO [net.sf.hibernate.transaction.TransactionManagerLookupFactory] No TransactionManagerLookup configured (in JTA environment, use of process level read-write cache is not recommended) WARN [net.sf.hibernate.cfg.SettingsFactory] Could not obtain connection metadata org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot create JDBC driver of class '' for connect URL 'null' at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1150) at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880) at net.sf.hibernate.connection.DatasourceConnectionProvider.getConnection(DatasourceConnectionProvider.java:59) at net.sf.hibernate.cfg.SettingsFactory.buildSettings(SettingsFactory.java:84) at net.sf.hibernate.cfg.Configuration.buildSettings(Configuration.java:1172) ... Caused by: java.lang.NullPointerException at sun.jdbc.odbc.JdbcOdbcDriver.getProtocol(JdbcOdbcDriver.java:507) at sun.jdbc.odbc.JdbcOdbcDriver.knownURL(JdbcOdbcDriver.java:476) at sun.jdbc.odbc.JdbcOdbcDriver.acceptsURL(JdbcOdbcDriver.java:307) at java.sql.DriverManager.getDriver(DriverManager.java:253) at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1143) ... 11 more Do you have any idea why Hibernate is not able to construct the session-factory? What is wrong in my configuration?

    Read the article

  • Windows cmd does not recognize xx.exe even though xx.exe is in system path

    - by July
    I installed 7-zip and add its directory to system path: C:\Program Files\7-Zip to PATH, from windows start-input cmd and press enter, Windows command line is started, i type 7z.exe, then press enter, it just run. However when i start command line this way: cmd.exe /c start {projectDir} /D{driveLetter} cmd /K then i type 7z.exe, it gives me error because it can not find 7z.exe. why and how to fix? P.S. 1. I'm on Win7. 2. For some other apps, the above way did works, that's why i'm so confused how bat works.

    Read the article

  • Should server spare parts be stored in climate controlled storage?

    - by Shane Wealti
    What is a best practice for storing server spares (hard drives, RAM, power supplies, etc) with respect to how/where they are stored? Some options are storing them in climate controlled storage or just a standard warehouse-type stockroom? My understanding is that all other things being equal climate-controlled storage is preferred. What are the risks of storing that type of thing in a non-climate-controlled, somewhat dusty shelving area? Conversely are there risks to storing spares in a climate controlled area? If there are space limitations in climate controlled storage are there some parts, such as hard drives, which should be in climate controlled, while other parts such as power supplies will probably be ok in non climate controlled storage?

    Read the article

  • Kaspersky processing error Explorer.exe (recycle bin)

    - by aeternus828
    I get daily critical errors from Kaspersky involving Explorer.exe... The file in question is almost always in the Recycle Bin, or something on the desktop. Here is an example error detail: Event type: Processing error Application\Name: EXPLORER.EXE Application\Path: C:\WINDOWS\ Application\Process ID: 2364 Application\Options: C:\windows\Explorer.EXE Component: File Anti-Virus Result\Description: Processing error Object: C:\$Recycle.Bin\S-1-5-21-1403139956-787289773-2644151291-500\$RIKKQKS Object\Type: File Object\Path: C:\$Recycle.Bin\S-1-5-21-1403139956-787289773-2644151291-500\ Object\Name: $RIKKQKS Reason: Read error Google searches didn't offer much insight, so I thought I'd ask here if anyone has encountered a similar situation. Not sure if it's a bug, something to be concerned about, or an easy fix, etc. I usually just empty the recycle bin for a temporary fix, but would like to get to the root of the error. Thoughts?

    Read the article

  • UNIX "find" command, match literal "dot"

    - by Robottinosino
    I need files ending with ".pdf" or ".png"; here's my attempt: find /Users/robottinosino/Desktop/_PublishMe_ -type f -regex '.*[pdf|png]' this incorrectly includes files ending with "Apdf", "Zpdf", etc. (missing literal dot before file extension) I tried adjusting the pattern to: find /Users/robottinosino/Desktop/_PublishMe_ -type f -regex '.*\.[pdf|png]' but then no results are returned. Escaping the . with a backslash does not work. Why? [0] $ uname -a Darwin Robottinosino.local 10.8.0 Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386 i386 Thanks!

    Read the article

  • How can I get ssh-agent working over ssh and in tmux (on OS X)?

    - by Rich
    I have a private key set up for my github account, the passphrase to which is, I believe, stored in OS X's keychain. I certainly don't have to type it in when I open a terminal window and enter ssh [email protected]. However, when I'm running bash over an ssh session, or locally inside a tmux session, I have to type in the passphrase every single time I attempt to ssh to github. This question suggests that a similar problem exists with screen, but I don't really understand the issue well enough to fix it in tmux. There's also this page which includes a fairly complicated solution, but for zsh. EDIT: In response to @Mikel's answer, from a local terminal I get the following output: [~] $ echo $SSH_AUTH_SOCK /tmp/launch-S4HBD6/Listeners [~] $ ssh-add -l 2048 [my key fingerprint] /Users/richie/.ssh/id_rsa (RSA) [~] $ typeset -p SSH_AUTH_SOCK declare -x SSH_AUTH_SOCK="/tmp/launch-S4HBD6/Listeners" Whereas over ssh or in tmux I get: [~] $ echo $SSH_AUTH_SOCK [~] $ ssh-add -l Could not open a connection to your authentication agent. [~] $ typeset -p SSH_AUTH_SOCK bash: typeset: SSH_AUTH_SOCK: not found echo $SSH_AGENT_PID returns nothing whatever shell I run it from.

    Read the article

  • Password for iis after installing

    - by zapping
    After installing IIS on my dev system, window xp professional, its asking for username and password while trying to access http://localhost. Can you please help me out. Tried googling and tried may things but could not resolve the issue. Anonymous access is enabled iusr_ is given full access to the wwwroot folder asp.net2.0 has been registered etc. But still not working. :( EDIT: Now the password issue has gone off and shows this: Error Type: Microsoft VBScript runtime (0x800A0046) Permission denied: 'GetObject' /localstart.asp, line 40 Browser Type: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Page: GET /localstart.asp

    Read the article

  • Added autossh in rc.local, but the dynamic port forwarding won't work

    - by rankjie
    I am using Rasbian on my newly arrived Rasp.Pi, and decided to make it my own proxy server. Now I need to set up a ssh tunnel on the Pi to my Linode server, and make it auto start with the system. What did I do: Add this line to /etc/rc.local autossh -f theRemoteServer -N -D 5555 -L 1234:localhost:22 After I reboot, I found out that I can't use the localhost:5555 as a socks proxy. So I type the command ps -A | grep ssh then I can see the autossh and ssh all running: pi@raspberrypi ~ $ ps -A | grep ssh 2018 ? 00:00:00 sshd 2116 ? 00:00:00 autossh 2119 ? 00:00:00 sshd 2195 ? 00:00:00 sshd 3173 ? 00:00:00 ssh (I've installed autossh, and the command works if I type it manually.) (I use the passwordless key auth, so I don't have to enter password.) Much appreciated and sorry for my poor English.

    Read the article

  • View unknown content-types in Firefox?

    - by dirtside
    A certain URL on my server returns Content-Type: application/json. The filename ends with .phtml, so whenever I go to it, Firefox 3.5 asks me if I want to save it or open it with another program. But the answer is neither; I want to view it in Firefox as if it was text/plain. Suggestions? The Applications tab of the Preferences window doesn't give this as an option for the "PHTML" type which now is listed in there (ever since I tried to open it with no external program).

    Read the article

  • Why do some PDFs lag in Adobe Acrobat?

    - by Coldblackice
    I have a handful of PDFs open. One of them in particular is extremely laggy, almost to the point of being unreadable. When I scroll through its pages, it's almost like an extreme version of v-sync being turned off. Very choppy. Overall system resources are plentiful, and all of the other PDFs cruise up and down with no stuttering or problems. I've tried closing and reopening the problem PDF to no avail. It's a small PDF, only 3MB in size, with no graphics (only programming code snippets). Surely, it must be some type of problem with the specific PDF (I'll try opening it in another PDF-viewing program, rather than Acrobat X). Possible corruption? Could there be some type of GPU/hardware-acceleration intervening going on? I've never heard of such with PDF-viewing.

    Read the article

  • What's the best scenario for using a wireless router with Comcast Business Class

    - by Buck
    Just had Comcast Business Class internet installed (usage details at bottom of post). During the call to order I asked about the hardware they'd be providing and was told it was a docsis 3 modem that I'd have to pay $7.00/month for. Figuring I'd have to buy a router anyway, I decided to get my own modem - a Surfboard SB6121 Docsis 3. I called in to tech support to ask some questions and learned that the modem they would have provided DID have a router built in. It's an SMCD3G-CCR. It's not wireless (we need wireless). The guy explained that it was better to have their hardware here because if there's a problem with our service and we're using our own hardware, chances are they'll blame it on our hardware and do nothing since they don't support it. He explained that I could still hang my own wireless router off their modem/router and if we ever had any service problems, we'd be able to plug directly into their hardware and they'd be able to tell where the problem is and they wouldn't be able to pawn it off onto "customer provided equipment". That all said, a few questions: 1. Am I better off returning my Surfboard modem and getting the Comcast one? If I get a wireless router and plug into one of the ethernet ports of the Comcast device, should I NOT plug anything else into the Comcast device since it would be a different network from anything connecting via the wireless router? Is that correct? Given that I know VERY LITTLE about networking and setting up hardware like this... since I need wireless and will HAVE to get a wireless router to work with this Comcast device, do I need to do anything with the settings of the Comcast device? Do I use security on the Comcast device or the wireless router or both? Any suggestions or anything I need to think about, given this scenario, in order to use a business-type voip service like RingCentral or Jive or Nextiva? Any recommendations on a wireless router for this scenario? We are running 2 PCs (possibly 3-4 in the future) - could be wired for the time being if needed but would prefer wireless; would like to have a networked hard drive and a networked printer; NEED business-type VOIP service asap for 2 phone lines. Would like to hook up some IP cameras at some point (but not the kind that require static IPs since I don't have one nor do I plan to pay Comcast another $15/month for one). I don't have or plan to have any type of web servers or anything like that. Want to use WPA or WPA2 security and take advantage of the NAT feature of the router for additional protection (that's the extent of my networking knowledge).

    Read the article

  • YSLow says certain CSS are not gzipped

    - by rhand
    YSlow keeps on telling me files like http://www.example.com/wp-content/plugins/q-and-a/css/q-a-plus.css?ver=1.0.6.2 are not gzipped while the gzip test tool at Feed the Bot mentions I am all good: Compressed? Yes Compression type gzip Page size (Bytes) 32,493 Compressed size (Bytes) -1 Saving (Bytes) 32,494 Compression % 100% I added this to my .htaccess: # Gzip <ifModule mod_gzip.c> mod_gzip_on Yes mod_gzip_dechunk Yes mod_gzip_item_include file .(html?|txt|css|js|php|pl)$ mod_gzip_item_include handler ^cgi-script$ mod_gzip_item_include mime ^text/.* mod_gzip_item_include mime ^application/x-javascript.* mod_gzip_item_exclude mime ^image/.* mod_gzip_item_exclude rspheader ^Content-Encoding:.*gzip.* </ifModule> #Deflate <ifmodule mod_deflate.c> AddOutputFilterByType DEFLATE text/text text/html text/plain text/xml text/css application/x-javascript application/javascript </ifmodule> The header for the file mentioned states: CF-Cache-Status MISS CF-RAY 13945df90a9a0c1d-AMS Cache-Control public, max-age=2592000 Connection keep-alive Content-Encoding gzip Content-Type application/javascript Date Thu, 12 Jun 2014 07:34:38 GMT Expires Sat, 12 Jul 2014 07:34:38 GMT Last-Modified Thu, 21 Feb 2013 01:29:18 GMT Server cloudflare-nginx Transfer-Encoding chunked Vary Accept-Encoding Any ideas what I am missing here?

    Read the article

  • View a pdf with quick webview though apache proxy

    - by Musa
    I have a site(IIS) that is accessed via a proxy in apache(on an IBM i). This site serves PDFs which has quick web view and if I access a pdf directly from the IIS server the PDFs starts to display immediately but if I go through the proxy I have to wait until the entire pdf downloads before I can view it. In the apache config file I use ProxyPass /path/ http://xxx.xxx.xxx.xxx/ <LocationMatch "/path/"> Header set Cache-Control "no-cache" </LocationMatch> I tried adding SetEnv proxy-sendcl to LocationMatch directive this had no effect. The PDFs that view quickly makes a lot of partial requests This is the initial request and response headers GET http://xxx.xxx.xxx.xxx/xxx.PDF HTTP/1.1 Host: xxx.xxx.xxx.xxx Proxy-Connection: keep-alive Cache-Control: no-cache Accept: text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,*/*;q=0.8 Pragma: no-cache User-Agent: Mozilla/5.0 (Windows NT 6.2; rv:9.0.1) Gecko/20100101 Firefox/9.0.1 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Cookie: chocolatechip HTTP/1.1 200 OK Via: 1.1 xxxxxxxx Connection: Keep-Alive Proxy-Connection: Keep-Alive Content-Length: 15330238 Date: Mon, 25 Aug 2014 12:48:31 GMT Content-Type: application/pdf ETag: "b6262940bbecf1:0" Server: Microsoft-IIS/7.5 Last-Modified: Fri, 22 Aug 2014 13:16:14 GMT Accept-Ranges: bytes X-Powered-By: ASP.NET This is a partial request and response GET http://xxx.xxx.xxx.xxx/xxx.PDF HTTP/1.1 Host: xxx.xxx.xxx.xxx Proxy-Connection: keep-alive Cache-Control: no-cache Pragma: no-cache User-Agent: Mozilla/5.0 (Windows NT 6.2; rv:9.0.1) Gecko/20100101 Firefox/9.0.1 Accept: */* Referer: http://xxx.xxx.xxx.xxx/xxxx.PDF Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Cookie: chocolatechip Range: bytes=0-32767 HTTP/1.1 206 Partial Content Via: 1.1 xxxxxxxx Connection: Keep-Alive Proxy-Connection: Keep-Alive Content-Length: 32768 Date: Mon, 25 Aug 2014 12:48:31 GMT Content-Range: bytes 0-32767/15330238 Content-Type: application/pdf ETag: "b6262940bbecf1:0" Server: Microsoft-IIS/7.5 Last-Modified: Fri, 22 Aug 2014 13:16:14 GMT Accept-Ranges: bytes X-Powered-By: ASP.NET These are the headers I get if I go through he proxy GET /path/xxx.PDF HTTP/1.1 Host: domain:xxxx Connection: keep-alive Cache-Control: no-cache Accept: text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,*/*;q=0.8 Pragma: no-cache User-Agent: Mozilla/5.0 (Windows NT 6.2; rv:9.0.1) Gecko/20100101 Firefox/9.0.1 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 HTTP/1.1 200 OK Date: Mon, 25 Aug 2014 13:28:42 GMT Server: Microsoft-IIS/7.5 Content-Type: application/pdf Last-Modified: Fri, 22 Aug 2014 13:16:14 GMT Accept-Ranges: bytes ETag: "b6262940bbecf1:0"-gzip X-Powered-By: ASP.NET Cache-Control: no-cache Expires: Thu, 24 Aug 2017 13:28:42 GMT Vary: Accept-Encoding Content-Encoding: gzip Keep-Alive: timeout=300, max=100 Connection: Keep-Alive Transfer-Encoding: chunked I'm guessing its because the proxy uses Transfer-Encoding: chunked but I'm not sure and wasn't able to turn it off to check. Browser Chrome 36.0.1985.143 m Using the native PDF viewer Any help to get the pdf quick web view through the proxy working would be appreciated.

    Read the article

  • accidentally concatenate a large file on a remote system

    - by Dan
    Every once in a while on a computer I'm ssh'd into, I will accidentally type "cat largefile.txt" and my screen will start rushing with text for the next 10 minutes. I'm always working in a screen session, so my current solution is to just log out and then log back in, and since it can go 100X faster when I'm logged out, it'll finish in the short time it takes me to type my password in again. Is there a better way? Either involving the fact I'm in a screen session? Or a way to do this within SSH? What doesn't work: detaching from the screen session (doesn't respond until file is done outputting) trying command to move to a different window in the screen session (also doesn't respond) typing ctrl+C to kill cat command (also doesn't respond, probably because the command is done and the buffers just have to catch up)

    Read the article

  • Windows 7 PC refuses to join domain

    - by Alex
    So, we're wiping clean all PCs at our office and migrating them to a new server cluster and a new domain. Last night I tested on PC and it mostly worked except it refuses to join to the domain. Now, our domain is named like EXAMPLE.COM. When I just type EXAMPLE the PC can't find the domain controller, even though I can ping it find. If I type EXAMPLE.COM it seems to work. How can I get it to work with just EXAMPLE? That's how I got all the new servers int he cluster to work (about 20 of them) and I haven't had any issues... The only difference between the Windows 7 PC(s) and the servers is that the clients will be on a 10.0.3.X network where as the servers are on a 10.0.1.X network. Oh, the domain controller and all the other servers are Windows Server 2008 R2. Suggestions will be highly appreciated!

    Read the article

  • How do I set up a bridge on Ubuntu GNOME 14.04

    - by NJRandy
    I found a guide for setting up a bridge in Fedora and was trying this: $ nmcli connection delete p33p1 $ nmcli connection add con-name br0 type bridge ifname br0 autoconnect yes $ nmcli connection add con-name p33p1 type bridge-slave ifname p33p1 master br0 autoconnect yes I found that $ nmcli con delete uuid [uuid here] accomplished the first step. nmcli connection does not have an 'add' action in this distribution. Please help me do the 2nd and 3rd steps. Context: I am trying to set up a virtual machine. I believe this is a necessary step for the VM to access my network and the internet. Please feel free to correct me if I am wrong! BTW, I am a linux newbie, tech oldie. Thank you.

    Read the article

  • 40k Event Log Errors an hour Unknown Username or bad password

    - by ErocM
    I am getting about 200k of these an hour: An account failed to log on. Subject: Security ID: SYSTEM Account Name: TGSERVER$ Account Domain: WORKGROUP Logon ID: 0x3e7 Logon Type: 4 Account For Which Logon Failed: Security ID: NULL SID Account Name: administrator Account Domain: TGSERVER Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x334 Caller Process Name: C:\Windows\System32\svchost.exe Network Information: Workstation Name: TGSERVER Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: Advapi Authentication Package: Negotiate Transited Services: - Package Name (NTLM only): - Key Length: 0 This event is generated when a logon request fails. It is generated on the computer where access was attempted. The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe. The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network). The Process Information fields indicate which account and process on the system requested the logon. The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases. The authentication information fields provide detailed information about this specific logon request. - Transited services indicate which intermediate services have participated in this logon request. - Package name indicates which sub-protocol was used among the NTLM protocols. - Key length indicates the length of the generated session key. This will be 0 if no session key was requested. On my server... I changed my adminstrative username to something else and since then I've been inidated with these messages. I found on http://technet.microsoft.com/en-us/library/cc787567(v=WS.10).aspx that the 4 means "Batch logon type is used by batch servers, where processes may be executing on behalf of a user without their direct intervention." which really doesn't shed any light on it for me. I checked the services and they are all logging in as local system or network service. Nothing for administrator. Anyone have any idea how I tell where these are coming from? I would assume this is a program that is crapping out... Thanks in advance!

    Read the article

  • USB sector 0 not fount Kingston USB DT100 G2

    - by java
    Windows constantly asks me "Foramt Disk". when i go to command prompt and type format H: /fs:ntfs or format H: /fs:fat32 response: Cannot determine the number of sectors on this volume. if the benefit DISKPART detail disk Kingston DT 100 G2 USB Device Disk ID: 00000000 Type : USB Status : Online Path : 0 Target : 0 LUN ID : 0 Location Path : UNAVAILABLE Current Read-only State : No Read-only : No Boot Disk : No Pagefile Disk : No Hibernation File Disk : No Crashdump Disk : No Clustered Disk : No DISKPART detail volume Read-only : No Hidden : No No Default Drive Letter: No Shadow Copy : No Offline : No BitLocker Encrypted : No Installable : No Volume Capacity : 0 B Volume Free Space : 0 B what the problem?

    Read the article

< Previous Page | 449 450 451 452 453 454 455 456 457 458 459 460  | Next Page >