Search Results

Search found 29159 results on 1167 pages for 'xml configuration'.

Page 455/1167 | < Previous Page | 451 452 453 454 455 456 457 458 459 460 461 462  | Next Page >

• Running Ubuntu Server from a USB key / thumb drive (being mindful of flash's write limitations)

  - by andybjackson

  Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and a ZFS RAID-Z array for data. I settled on this configuration after trying and regretfully rejecting FreeNAS because the Logitech Media Server (LMS) software isn't available on the AMD64 flavour of this platform and because I think Debian/Ubuntu server is a better future-proof platform. I considered Open Media Vault, but concluded that it isn't quite yet ready for my purposes. That said, FreeNAS does include the option to run itself off a 2GB+ flash device like USB key or thumb drive. Apparently FreeNAS is mindful of the write limitations of flash devices and so creates virtual disks for running the OS, writing only the required configuration information back to flash. This would give me an extra data drive slot. Q: Can Ubuntu Server be configured sensibly to run off a flash device such as a USB key/thumb drive? If so, how? The write limitations of flash should be accounted for.

  Read the article

• How to secure both root domain and wildcard subdomains with one SSL cert?

  - by Question Overflow

  I am trying to generate a self-signed SSL certificate to secure both example.com and *.example.com. Looking at the answers to this and this questions, there seems to be an equal number of people agreeing and disagreeing whether this could be done. However, the website from a certification authority seems to suggest that it could be done. Currently, these are the changes added to my openssl configuration file: [req] req_extensions = v3_req [req_distinguished_name] commonName = example.com [v3_req] subjectAltName = @alt_names [alt_names] DNS.1 = example.com DNS.2 = *.example.com I tried the above configuration and generated a certificate. When navigating to https://example.com, it produces the usual warning that the cert is "self-signed". After acceptance, I navigate to https://abc.example.com and an additional warning is produced, saying that the certificate is only valid for example.com. The certificate details only listed example.com in the certificate hierarchy with no signs of any wildcard subdomain being present. I am not sure whether this is due to a misconfiguration or that the common name should have a wildcard or that this could not be done.

  Read the article

• The Mac Tax

  - by Robert May

  One of our users was having difficulties with their mac and using some web software.  I decided to go peruse the landscape and see how much of a premium people were paying for their macs.  I priced out a Dell and a Mac from their websites.  I tried to get them as close to the same configuration, from a hardware standpoint, as I could.  I found the following: Apple Macbook Pro   Dell XPS 17 There are several important differences in the hardware: The mac doesn’t have a blueray player, but the dell does. The mac has a slightly slower processor. The mac claims to have a better battery, but doesn’t list the specifics, so there’s no way to tell. The mac doesn’t list the video card stats, so there’s no way to tell how comparable they are, but they’re probably close. The mac doesn’t come with any additional software.  No iWorks, iPhoto, etc.  They were left to their default of None, so arguably, the Dell is more functional out of the box. Other than changing the hardware specs to be close, all other configuration options were left at their default. So riddle me this, Batman:  Why do people buy Macs?  I have several dev buddies that own them, but I can’t justify the cost.  First, most of them load bootcamp and/or parallels at extra cost to run windows 7 and windows apps.  The hardware isn’t as good.  The price is almost twice as expensive. How do you justify the premium price? Technorati Tags: General

  Read the article

• samba - join domain - automatically set workgroup

  - by ftiaronsem

  Hell alltogether Since I have to do this often, I want to automate the joining to a windows domain as much as possible. While joining a domain one has to specify realm = in the /etc/smb.conf, along with some other settings like security=ads. Among these settingst there is workgroup = My question is: Is it possible to fill this field automatically by samba, while joining a domain? Normally I would just have said never, but as I tried leaving this field blank while joining a domain, i got: Failed to join domain: Invalid configuration ("workgroup" set to '', should be 'BLABLA') and configuration modification was not requested This has made me wondering whether an automatic modification is possible and if so how? A search on the internet and the man page brought no results. It would be really great, if someone could answer that. Thanks in advance ftiaronsem

  Read the article

• Extension GLX missing...on a desktop PC

  - by Bart van Heukelom

  I just installed Ubuntu 12.10 on a new PC with an Nvidia GTX 560 graphics card, but after installing the Nvidia proprietary drivers (either -current or -current-updates), Unity won't start. When trying to start it manually I get the message "extension GLX missing". I've searched around and found results like this question which point out it's a problem with Nvidia Optimus laptops. However, I don't have this problem on a laptop, but on a desktop PC. lshw output for the graphics card: *-display description: VGA compatible controller product: GF114 [GeForce GTX 560 SE] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:f4000000-f5ffffff memory:e0000000-e7ffffff memory:e8000000-ebffffff ioport:e000(size=128) memory:f6000000-f607ffff and CPU: *-cpu description: CPU product: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz vendor: Intel Corp. physical id: 40 bus info: cpu@0 version: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz slot: SOCKET 0 size: 1600MHz capacity: 3800MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms cpufreq configuration: cores=4 enabledcores=4 threads=4

  Read the article

• How do I network this Windows Failover Cluster and MongoDB Replica Set? (diagram inside)

  - by arex1337

  As you can see, my two Windows Server Failover Cluster (WSFC) nodes have three network interfaces each, which connects them to three different networks : A public network A private network consisting of the WSFC nodes A private network consisting of the WSFC nodes and a machine with the WSFC Quorum Witness File Share Does this network configuration I've planned, make sense? Do I have the "right" number of NICs and networks? I'm thinking the 2nd NIC/network may be unnecessary. My two MongoDB Replica Set nodes also have three network interfaces each - very similar to the previous situation: A public network A private network consisting of the primary and secondary MongoDB Replica Set nodes A private network consisting of the primary, secondary and arbiter MongoDB Replica Set nodes Does this network configuration, make sense? Do I have the "right" number of NICs and networks? I'm thinking the 2nd NIC/network may be unnecessary. Here is the simpler version I'm considering: UPDATE:

  Read the article

• Wireless drivers

  - by Kencer

  The results for my laptop are as below. How will i install wireless drivers and graphics? $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 02:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) $ sudo lshw -c network *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0500000-f0507fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 07 serial: 3c:97:0e:85:c0:0d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=172.16.96.36 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff $ rfkill list all 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

• NGiNX performance degrades over time.

  - by Rylea Stark

  So here's the situation, I run a small cluster, Dedicated box for MySQL, and a dedicated PHP-FPM/NGINX box, Nginx talks to php-fpm via socket, As far as i can tell the problem does not lie in php-fpm, it lies somewhere in my configuration. What happens, is the site loads instant for a few moments after starting and slowly starts to degrade to load times of greater than 2 seconds, eventually taking 12 seconds to complete a load, PHP is configured to close a child after 175 requests, and spawn 20 at start and have a max of 60. Not really sure where the bottle neck is, most of my code is optimized and works flawlessly, but these issues with nginx will most likely force me to switch back over to Apache, And I really dont want to do that, NGINX.conf configuration below. user www-data; worker_processes 4; worker_cpu_affinity 0001 0010 0100 1000; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 512; multi_accept on; use epoll; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; resolver_timeout 5s; satisfy all; ## Size Limits limit_zone brainbug $binary_remote_addr 5m; client_body_buffer_size 8k; client_header_buffer_size 75M; client_max_body_size 1k; large_client_header_buffers 2 1k; ## Timeouts client_body_timeout 60; client_header_timeout 60; keepalive_timeout 60; send_timeout 60; ## General Options ignore_invalid_headers on; recursive_error_pages on; sendfile on; server_name_in_redirect off; server_tokens off; ## TCP options tcp_nodelay on; #tcp_nopush on; output_buffers 128 512k; gzip on; gzip_http_version 1.0; gzip_comp_level 7; gzip_proxied any; gzip_min_length 0; gzip_buffers 32 32k; gzip_types text/plain text/html text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript image/jpeg image/png image/gif; ## Disable GZIP for MSIE 1-6 gzip_disable "MSIE [1-6].(?!.*SV1)"; ## Set a vary header so downstream proxies don't send cached gzipped content to IE6 gzip_vary on; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; }

  Read the article

• Deployment/provisioning tool for commercial applications (not developed in-house)

  - by mfinni

  I help manage a few hosted commercial applications, and we have a lot of manual processes involved when doing new customer-instance deployments into the shared (multitenant) environment. Allow me to describe the most relevant features, and then we can talk about the tools. We have an application on AIX, that requires dozens of changes to config files (some plain text, some XML) as well as a good number of commands to be run on multiple servers - some to start the new instance, some to restart our shared authentication and reporting engines, etc. The config changes follow templates, of course. The servers in question will also depend on the initial conditions specified by the implementer/deployer - we may choose to deploy a given customer to our servers in Europe, or one set of servers may be active-active whereas a different set of servers is active-passive - in short, there's a lot of complications. We have another application that run on IIS 6 and SQL. The DBAs don't want any automation of the SQL components and that's fine with me, but automating the IIS bit would be great. For a new customer instance, we make a filesystem copy of a template Virtual Directory target named after the new customer, make a new AppPool to match, edit a VirDir template .xml file to replace the filepaths and AppPool names with the new ones, and then make a new VirDir from the modified template XML to point to the new filesystem folder and app pool. For the first case, something like ControlTier or Chef might be good. For the second, the new(ish) Web Deploy from MS would probably do a good job. Has anyone used these tools or others to do something similar for applications? More of a nice-to-have, not a fixed requirement - Has anyone used anything that works on both platforms? I'm looking for something free, because the official word is that within a year, we will have whatever HP has renamed the OpsWare suite, which should be able to do stuff like this. Edit - based on someone's suggestion, looking at CFengine for the AIX application, it doesn't seem to address my pain. The problem isn't keeping a given config synced across dozens of servers, we have rsync for that. The problem is that onboarding a new customer instance touches dozens of files, putting pieces of the same or similar information into them - some are new stanzas in existing files, some are new files, and some are new directories. This is a several-hours-long process that is also error-prone because it's mostly done by hand. I guess I'm looking for config-file generation and management. I have built a small Perl script to do something similar for a much smaller case - it binds a CSV file into variables, and then does a copy-and-search-and-replace from a set of template config files. I could probably do the same here.

  Read the article

• TransformXml Task locks config file identified in Source attribute

  - by alexhildyard

  As background: the TransformXml MSBuild task is typically invoked in a custom build step to mark up a web.config file with per-environment configuration; its flexible directives offer highly granular control over the insertion, removal, substitution and transformation of existing configuration hierarchies. For those using the TransformXML task (typically in a Web Deployment Project) I raised an issue against Visual Studio 2010, in which the file handle on the input file was not released, meaning that following transformation the source file remained locked. As a result, the best way to transform a file was first to rename it, transform it, and then copy it back, leaving the "locked" file to be freed up later.I just heard today that this has now been resolved in Visual Studio 2012 RTM. That's good news, because Web Config Transformations offer a lot. An intelligent, automated build process will swap in the relevant transform(s), making it much easier to synthesise the Developer and Build server builds. This makes for a simpler and more exemplary build process, and with the tighter coupling comes a correspondingly quicker response to Developmental change.Oh, and don't forget -- it isn't just web.configs you can transform. You can transform app.configs, or indeed any XML file that honours the task's schema and hierarchical rules.

  Read the article

• sendmail on Ubuntu won't send from www-data user

  - by bumperbox

  I if call mail() function in PHP from webserver (running as www-data) i get an error sending email. If i call the same script from the cmdline logged in as root, then it works If i switch user to www-data and run from the cmdline i get this error message WARNING: RunAsUser for MSP ignored, check group ids (egid=33, want=107) can not chdir(/var/spool/mqueue-client/): Permission denied Program mode requires special privileges, e.g., root or TrustedUser. FAILEDWARNING: RunAsUser for MSP ignored, check group ids (egid=33, want=107) can not chdir(/var/spool/mqueue-client/): Permission denied Program mode requires special privileges, e.g., root or TrustedUser. FAILEDTest Complete$ WARNING: RunAsUser for MSP ignored, check group ids (egid=33, want=107) I am guessing i need to do something in sendmail configuration I have googled for some solutions but have ended up more confused. Can someone let me know what configuration I need to change to fix so i can send from www-data user?

  Read the article

• script to count the occurence of the particular string in the given time interval

  - by pruthvi

  We are trying to write a script "sendemail.sh" to count the number of occurrence of a particular string in a log file "SendEmail.log" within the given interval. We have a log file. In that we are searching for a pattern "ReqInputMsgLog" and need to count the number of times it occurred in the given period for eg: from "2014-08-19 11:30" to "2014-08-19 11:34". And our script look like this: #!/bin/sh enterdate=$1 echo $enterdate enddate=$2 enterdate1=`date +%s -d $enterdate +"%Y-%m-%d %H:%M"` echo $enterdate1 enddate1=`date +%s -d $enddate +"%Y-%m-%d %H:%M"` echo $enddate count=0 cat SendEmail.log | grep "ReqInputMsgLog" | awk -F "[" '{print $3}' | awk -F "," '{print $1}' > /con/scripts_server/file.txt for line in `cat /con/scripts_server/file.txt` do logdate=`echo $line | awk -F : '{print $1":"$2}'` if [[ $logdate < $enddate1 ]]; then count=`expr $count + 1` fi done echo $count But when we are trying to execute the script by the below command its not showing the proper count. ./sendemail.sh "2014-08-19 11:30" "2014-08-19 11:34" Log file is very big one. Small chunk has been posted here. INFO [SIBJMSRAThreadPool : 5] [2014-08-19 11:18:24,471] SendEmail - 8/19/14 11:18 AM,ECCF25B0-0147-4000-E000-1B830A3C05A9,ReqInputMsgLog,SendEmail,<?xml version="1.0" encoding="UTF-8"?> <in:sendEmailRequestMsg xmlns:in="http://EmailMed/EmailMedInterface" xmlns:ns0="wsdl.http://EmailMed/EmailMedInterface" xmlns:ns1="http://EmailMed/EmailMedInterface" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:me="wsdl.http://EmailMed/EmailMedInterface" xsi:type="me:sendEmailRequestMsg"> <in:sendEmail xmlns:xci0="http://EmailMed/EmailMedInterface"> INFO [SIBJMSRAThreadPool : 7] [2014-08-19 11:18:14,235] SendEmail - 8/19/14 11:18 AM,ECCEFDB2-0147-4000-E000-1B830A3C05A9,ReqInputMsgLog,SendEmail,<?xml version="1.0" encoding="UTF-8"?> <in:sendEmailRequestMsg xmlns:in="http://EmailMed/EmailMedInterface" xmlns:ns0="wsdl.http://EmailMed/EmailMedInterface" xmlns:ns1="http://EmailMed/EmailMedInterface" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:me="wsdl.http://EmailMed/EmailMedInterface" xsi:type="me:sendEmailRequestMsg"> <in:sendEmail xmlns:xci0="http://EmailMed/EmailMedInterface"> INFO [SIBJMSRAThreadPool : 7] [2014-08-19 11:18:14,241] SendEmail - xmlText: <?xml version="1.0" encoding="UTF-8"?> after awk command we will get a file "/con/scripts_server/file.txt" which looks similar like below: 2014-08-19 11:28:03 2014-08-19 11:28:06 2014-08-19 11:28:17 2014-08-19 11:28:53 2014-08-19 11:29:02 2014-08-19 11:29:47 2014-08-19 11:29:57 2014-08-19 11:30:07 2014-08-19 11:30:17 2014-08-19 11:30:19 2014-08-19 11:30:19 2014-08-19 11:30:22 2014-08-19 11:30:25 2014-08-19 11:30:25 2014-08-19 11:30:36 2014-08-19 11:30:51 2014-08-19 11:30:56 2014-08-19 11:30:59 2014-08-19 11:30:59 2014-08-19 11:31:08 2014-08-19 11:31:25 2014-08-19 11:32:19 2014-08-19 11:32:22 2014-08-19 11:32:27 2014-08-19 11:32:28 2014-08-19 11:32:41 2014-08-19 11:32:49 2014-08-19 11:32:59 2014-08-19 11:33:27 2014-08-19 11:33:41 2014-08-19 11:34:07 2014-08-19 11:34:14 2014-08-19 11:34:21 2014-08-19 11:34:25 2014-08-19 11:34:38 2014-08-19 11:34:50 2014-08-19 11:34:58

  Read the article

• how to set auto redirection in tomcat

  - by Registered User

  I have a site http://social.openitup.in right now what you are seeing is a default Tomcat6 page. I am using mod_ajp as a front end and Apache vhost configuration for same is <VirtualHost *:80 > ServerName social.openitup.in ServerAdmin webmaster@localhost ProxyRequests off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPreserveHost On ProxyPass / ajp://192.168.1.19:8009/ ProxyPassReverse / ajp://192.168.1.19:8009/ </VirtualHost> How ever I have an application running on it http://social.openitup.in/olat what I want to do is when some one opens http://social.openitup.in then rather than seeing Tomcat6 home page from /var/lib/tomcat6/webapps/ROOT/index.html the person is redirected to olat application which is in /var/lib/tomcat6/webapps/olat how can this be achived? The above vhost configuration is on a machine separate than where OLAT is running.

  Read the article

• Ubuntu 12.04.1 LTS and Nvidia dirver (304.51) 64bit: problem 640x480

  - by nibianaswen

  I have a problem with this configuration: Asus K55V, Ubuntu 12.04 LTS and Nvidia driver 304.51. I have remove the nouveau driver with: apt-get --purge remove xserver-xorg-video-nouveau I installed the official nvidia driver (from www.nvidia.com) but when I reboot the PC the resolution of screen is only 640x480 and the monitor is resized. Mo solution at this problem if i change the xorg.conf. Now i have uninstall the nvidia driver and reinstall with sudo apt-get purge nvidia-current sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current When I reboot the screen resolution and size is OK, but if I start nvidia-setting I received the message: You do not appear to be using the NVIDIA X driver. and with command: sudo lshw -c display | grep driver I received configuration: driver=i915 latency=0 This sound like the system is using the Intel card. When I launch command lspci | grep VGA the output is: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1058 (rev ff) And there is no /etc/X11/xorg.conf. I have read a lot of guides on internet but without success.. How i can use nvidia card with the driver that i have installed?

  Read the article

• SSH: Port Forwarding, Firewalls, & Plesk

  - by Kian Mayne

  I edited my SSH configuration to accept connections on Port 213, as it was one of the few ports that my work firewall allows through. I then restarted sshd and everything was going well. I tested the ssh server locally, and checked the sshd service was listening on port 213; however, I still cannot get it to work outside of localhost. PuTTY gives a connection refused message, and some of the sites that allow check of ports I tried said the port was closed. To me, this is either firewall or port forwarding. But I've already added inbound and outbound exceptions for it. Is this a problem with my server host, or is there something I've missed? My full SSH config file, as requested: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. Port 22 Port 213 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

  Read the article

• Reporting Services 2008 & 2012 side by side

  - by Iulian Ilies

  I have installed Sql Server 2008 & 2012 side by side on the same machine, and that's includes the reporting service for each. Both are instances are named instances: MSSQLSERVER2008 and MSSQLSERVER2012. I didn't configure the 2008 one but configured 2012 first and this one is working fine. However later on when I wanted to configure the 2008 reporting service instance I was not able to do so; it simply cannot find it. Both services are displayed as running, nevertheless while being in Reporting Services Configuration Manager only the 2012 instance is displayed. I tried stopping the 2012 but still no luck, 2008 won't show up in the RS configuration manager. Any suggestions? Thanks in advance Iulian

  Read the article

• StyleCop Custom Rules

  - by Aligned

  There are several blogs on how to do this (http://scottwhite.blogspot.com/2008/11/creating-custom-stylecop-rules-in-c.html, etc). I’ve found a few useful things to point out: Debugging is difficult, but here are the steps (thanks to Tintin’s answer). “One way: 1) Delete your custom rules 2) Open Visual Studio (for dev), open your custom rule solution 3) Build & Deploy custom rules (a PostBuild action to copy the rules into the StyleCop folder is handy) 4) Open Visual Studio (for test) 5) Use VS (dev) and Attach to process devenv.exe (the test VS instance), set breakpoints in the rules you want to debug 6) Use VS’ (test) and right-click on project, Run StyleCop 7) Debug” ~ it worked once, now I’m having problems getting it to work again ~ I also get the message “Cannot evaluate expression because the code of the current method is optimized.” when I try to look at properties. Looking at the source code of the StyleCop.CSharp.Rules.dll that comes with the install. I used JustDecompile from Telerik. Create one xml file and name it the same as the one cs file (CodingGuildelineRules.cs and CodingGuidelinRules.xml) Deploy: 1. Build in Visual Studio 2. Close Visual Studio (Style cop is running so you can’t override your dll without closing) 3. Copy the dll from the bin to the C: \Program Files (x86)\StyleCop 4.7\ 4. Open the settings file or re-open Visual Studio

  Read the article

• ipconfig /release not working, why?

  - by barlop

  ipconfig /release is not working, why is that? here is a sequence where I put my cable in get an IP, try ipconfig /release and it tells me it can't release wireless, but there is no wireless connection. i'm just trying to release the wired one. C:\>ipconfig Windows IP Configuration Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Fine so I plug my cable in C:\>ipconfig Windows IP Configuration Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 0.0.0.0 Subnet Mask . . . . . . . . . . . : 0.0.0.0 Default Gateway . . . . . . . . . : C:\>ipconfig Windows IP Configuration Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.1.8 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.254 Fine so from above, it clearly has an iP C:\>ipconfig /release Windows IP Configuration No operation can be performed on Wireless Network Connection while it has its me dia disconnected. C:\>

  Read the article

• Apply a BSU patch manually in Off-line Mode

  - by adejuanc

  To apply patch or patches in Off-line mode.Note that you will need at least the patch-catalog.xml and one patch jar file.BSU Patch Installation Off-line Mode------------------------------------------------------------------------------------------------------------Apply patch or patches in Off-line modeNote: To apply the patch in offline mode refer to the section 8 Using the Command-Line Interface of Using the Command-Line Interface guide availablehere - http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14143/toc.htmSteps:1. Make sure you have the following files inside Folder WLS_ORACLE_HOME/utils/bsu/cache_dir- patch-catalog.xml- XXXX.jarNote that XXXX is the patch ID, is just a reference name.2. Apply the patch by running the following command:> cd WLS_ORACLE_HOME/utils/bsu/> ./bsu.sh -prod_dir=WLS_ORACLE_HOME/wlserver_10.3 -patchlist=<Patch_Id> -verbose -installFor example:> ./bsu.sh -prod_dir=/Oracle/Middleware/wlserver_10.3 -patchlist=XXXX -verbose -installAfter this the patch should be applied successfully.3. You can view the report of applied patches by running the following command:> ./bsu.sh -report -patch_id_mask=<Patch_Id>For example: > ./bsu.sh -report -patch_id_mask=XXXX4. Restart the server and watch the standard output logs to verify the installation.5. If you have more patches to apply go to step 1.6. Repeat the process on each Instance Server including the admin Server.

  Read the article

• wireless is disabled by hardware lenovo 3000g430

  - by sudheer

  sir i have problem with my wifi switch sir please tell me solution for my problem (wifi is disabled by hardware). output of sudo lshw -C network is sudo] password for sudheer: *-network DISABLED description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:06:00.0 logical name: eth2 version: 01 serial: 00:21:00:72:3a:93 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:19 memory:f4700000-f4703fff *-network description: Ethernet interface product: NetLink BCM5906M Fast Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 02 serial: 00:1e:68:ad:24:0b size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=sb v3.04 ip=172.16.52.79 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:47 memory:f4600000-f460ffff output of iwconfig is lo no wireless extensions. eth2 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. sudheer@sudheer:~$ sudo iwlistscanning sudo: iwlistscanning: command not found ***sudheer@sudheer:~$ sudo iwlist scanning*** lo Interface doesn't support scanning. eth2 Failed to read scan data : Invalid argument eth0 Interface doesn't support scanning.

  Read the article

• Network: Incoming connections work, outgoing fails

  - by anirvan

  i recently set up my own server at home to run Ubuntu 12.04 server ed. on booting up, i noticed that a message related to networking comes up, and the booting process pauses. the message read something like - waiting for network configuration and after a while - waiting another 60 seconds... on booting up, I realised that any command which requires a network connection was not working - ping, apt-get install, etc. on firing the ifup eth0 command, I get the error RTNETLINK answers: File exists. Failed to bring up eth0. I also realised, while searching the web for this problem, that this is probably one of the most common networking related issues - however, most of the questions are around setting up multiple IPs for the same machine. ifdown eth0 also fails, stating that eth0 is not configured. my /etc/network/interfaces file has a simple configuration for a static IP: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask xx.xx.xx.xx broadcast xx.xx.xx.xx gateway xx.xx.xx.xx dns-nameservers xx.xx.xx.xx The strangest part of this problem is that, while I can't connect to anything outside, I can ping to this particular server using the static IP configured in the interface file, and, i can even SSH into it! I'm really at ends here with this problem, and any guidance is much appreciated. Thanks!

  Read the article

• Nginx + PHP-FPM on Centos 6.5 gives me 502 Bad Gateway (fpm error: unable to read what child say: Bad file descriptor)

  - by Latheesan Kanes

  I am setting up a standard LEMP stack. My current setup is giving me the following error: 502 Bad Gateway This is what is currently installed on my server: Here's the configurations I've created/updated so far, can some one take a look at the following and see where the error might be? I've already checked my logs, there's nothing in there (http://i.imgur.com/iRq3ksb.png). And I saw the following in /var/log/php-fpm/error.log file. sidenote: both the nginx and php-fpm has been configured to run under a local account called www-data and the following folders exits on the server nginx.conf global nginx configuration user www-data; worker_processes 6; worker_rlimit_nofile 100000; error_log /var/log/nginx/error.log crit; pid /var/run/nginx.pid; events { worker_connections 2048; use epoll; multi_accept on; } http { include /etc/nginx/mime.types; default_type application/octet-stream; # cache informations about FDs, frequently accessed files can boost performance open_file_cache max=200000 inactive=20s; open_file_cache_valid 30s; open_file_cache_min_uses 2; open_file_cache_errors on; # to boost IO on HDD we can disable access logs access_log off; # copies data between one FD and other from within the kernel # faster then read() + write() sendfile on; # send headers in one peace, its better then sending them one by one tcp_nopush on; # don't buffer data sent, good for small data bursts in real time tcp_nodelay on; # server will close connection after this time keepalive_timeout 60; # number of requests client can make over keep-alive -- for testing keepalive_requests 100000; # allow the server to close connection on non responding client, this will free up memory reset_timedout_connection on; # request timed out -- default 60 client_body_timeout 60; # if client stop responding, free up memory -- default 60 send_timeout 60; # reduce the data that needs to be sent over network gzip on; gzip_min_length 10240; gzip_proxied expired no-cache no-store private auth; gzip_types text/plain text/css text/xml text/javascript application/x-javascript application/xml; gzip_disable "MSIE [1-6]\."; # Load vHosts include /etc/nginx/conf.d/*.conf; } conf.d/www.domain.com.conf my vhost entry ## Nginx php-fpm Upstream upstream wwwdomaincom { server unix:/var/run/php-fcgi-www-data.sock; } ## Global Config client_max_body_size 10M; server_names_hash_bucket_size 64; ## Web Server Config server { ## Server Info listen 80; server_name domain.com *.domain.com; root /home/www-data/public_html; index index.html index.php; ## Error log error_log /home/www-data/logs/nginx-errors.log; ## DocumentRoot setup location / { try_files $uri $uri/ @handler; expires 30d; } ## These locations would be hidden by .htaccess normally #location /app/ { deny all; } ## Disable .htaccess and other hidden files location /. { return 404; } ## Magento uses a common front handler location @handler { rewrite / /index.php; } ## Forward paths like /js/index.php/x.js to relevant handler location ~ .php/ { rewrite ^(.*.php)/ $1 last; } ## Execute PHP scripts location ~ \.php$ { try_files $uri =404; expires off; fastcgi_read_timeout 900; fastcgi_pass wwwdomaincom; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } ## GZip Compression gzip on; gzip_comp_level 8; gzip_min_length 1000; gzip_proxied any; gzip_types text/plain application/xml text/css text/js application/x-javascript; } /etc/php-fpm.d/www-data.conf my php-fpm pool config ## Nginx php-fpm Upstream upstream wwwdomaincom { server unix:/var/run/php-fcgi-www-data.sock; } ## Global Config client_max_body_size 10M; server_names_hash_bucket_size 64; ## Web Server Config server { ## Server Info listen 80; server_name domain.com *.domain.com; root /home/www-data/public_html; index index.html index.php; ## Error log error_log /home/www-data/logs/nginx-errors.log; ## DocumentRoot setup location / { try_files $uri $uri/ @handler; expires 30d; } ## These locations would be hidden by .htaccess normally #location /app/ { deny all; } ## Disable .htaccess and other hidden files location /. { return 404; } ## Magento uses a common front handler location @handler { rewrite / /index.php; } ## Forward paths like /js/index.php/x.js to relevant handler location ~ .php/ { rewrite ^(.*.php)/ $1 last; } ## Execute PHP scripts location ~ \.php$ { try_files $uri =404; expires off; fastcgi_read_timeout 900; fastcgi_pass wwwdomaincom; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } ## GZip Compression gzip on; gzip_comp_level 8; gzip_min_length 1000; gzip_proxied any; gzip_types text/plain application/xml text/css text/js application/x-javascript; } I've got a file in /home/www-data/public_html/index.php with the code <?php phpinfo(); ?> (file uploaded as user www-data).

  Read the article

• How can I diagnose cache misses when using Apache as a reverse proxy?

  - by johnstok

  I have set up Apache 2.2 as a reverse proxy with the following configuration: # jBoss proxying ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /foo http://localhost:9080/foo ProxyPassReverse /foo http://localhost:9080/foo ProxyPassReverseCookiePath /foo /foo # Reverse proxy caching CacheEnable disk /foo # Compression SetOutputFilter DEFLATE BrowserMatch ^Mozilla/4 gzip-only-text/html BrowserMatch ^Mozilla/4\.0[678] no-gzip BrowserMatch \bMSIE\s(7|8) !no-gzip !gzip-only-text/html DeflateCompressionLevel 9 Header append Vary User-Agent env=!dont-vary However, in a number of cases where I expect a cached response to be returned the request is sent through to the origin server at localhost:9080. Responses have a HTTP Vary header of 'Accept-Encoding,User-Agent' which is to be expected given the mod_deflate configuration. How can I determine why Apache is unable to serve a response from the cache?

  Read the article

• Playing Around with WebLogic Maven Plug-In by Flavius Sana

  - by JuergenKress

  Packaged with WebLogic 12c wls-maven-plugin let’s you install, start and stop servers, create domain, execute WLST scripts, compile and deploy applications. The plug-in works with Maven 2.x and 3.x. WebLogic 12c can be downloaded from http://www.oracle.com/technetwork/index.html. Developers version has around  180MB (zip archive).  To install the plugin we need first to extract wls-maven-plugin.jar.pack and pom.xml $unzip ~/Downloads/wls1212_dev.zip wls12120/wlserver/server/lib/wls-maven-plugin.jar.pack $unzip ~/Downloads/wls1212_dev.zip wls12120/wlserver/server/lib/pom.xml Now, let’s unpack the jar file: $unpack200 -r wls12120/wlserver/server/lib/wls-maven-plugin.jar.pack wls12120/wlserver/server/lib/wls-maven-plugin.jar Install the plug-in in the local repository. Read the complete article here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Maven,Flavius Sana,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• BI Publisher : Formatting Issues

  - by Manoj Madhusoodanan

  While creating BI Publisher reports the formatting issues are quite common.Here I am discussing some common issues related to BIP report development. 1) First issue is related to column formatting.When you want to display some data which has leading zeros or trailing zeros after '.' in EXCEL output you will not get the desired output.But in PDF it will come as what you are expecting.This is not with the issue of your data. This is due to the unique nature of EXCEL cell format.When you are trying to put a text data in a cell with out making any change to cell format it will treat as number and it will truncate all leading zeros and all trailing zeros after '.' . So what you have to do is to convert that data into a format which EXCEL can treat as text. Eg: If you want to display 0020100 convert this data into ="0020100". Same way for 23789.02300 to ="23789.02300".   Note: This is applicable to EXCEL output only.If you have multiple output type apply it only for EXCEL. 2) Second is related to report size issue in PDF output type.If the number of columns are more and if you want to show most of the columns in one row andif it is a PDF output you can choose the paper size as Legal (8.5 x 14''). You will get more spaces in the template to accommodate more columns. 3) If your XML data contains special characters like &,<,> etc ..  pass the data to DBMS_XMLGEN.CONVERT function.It will replace special characters with corresponding XML notations. Eg: (a>b) & (c!=d) to  (a&gt;b) &amp; (c!=d)

  Read the article

< Previous Page | 451 452 453 454 455 456 457 458 459 460 461 462  | Next Page >